Dynamics Of Interfacial Water Research Articles

Bimetallic nanoalloys planted on super-hydrophilic carbon nanocages featuring tip-intensified hydrogen evolution electrocatalysis

The insufficient availability and activity of interfacial water remain a major challenge for alkaline hydrogen evolution reaction (HER). Here, we propose an “on-site disruption and near-site compensation” strategy to reform the interfacial water hydrogen bonding network via deliberate cation penetration and catalyst support engineering. This concept is validated using tip-like bimetallic RuNi nanoalloys planted on super-hydrophilic and high-curvature carbon nanocages (RuNi/NC). Theoretical simulations suggest that tip-induced localized concentration of hydrated K+ facilitates optimization of interfacial water dynamics and intermediate adsorption. In situ synchrotron X-ray spectroscopy endorses an H* spillover-bridged Volmer‒Tafel mechanism synergistically relayed between Ru and Ni. Consequently, RuNi/NC exhibits low overpotential of 12 mV and high durability of 1600 h at 10 mA cm‒2 for alkaline HER, and demonstrates high performance in both water electrolysis and chlor-alkali electrolysis. This strategy offers a microscopic perspective on catalyst design for manipulation of the local interfacial water structure toward enhanced HER kinetics.

Molecular dynamics simulation study of water structure and dynamics on the gold electrode surface with adsorbed 4-mercaptobenzonitrile.

Understanding water dynamics at charged interfaces is of great importance in various fields, such as catalysis, biomedical processes, and solar cell materials. In this study, we implemented molecular dynamics simulations of a system of pure water interfaced with Au electrodes, on one side of which 4-mercaptobenzonitrile (4-MBN) molecules are adsorbed. We calculated time correlation functions of various dynamic quantities, such as the hydrogen bond status of the N atom of the adsorbed 4-MBN molecules, the rotational motion of the water OH bond, hydrogen bonds between 4-MBN and water, and hydrogen bonds between water molecules in the interface region. Using the Luzar-Chandler model, we analyzed the hydrogen bond dynamics between a 4-MBN and a water molecule. The dynamic quantities we calculated can be divided into two categories: those related to the collective behavior of interfacial water molecules and the H-bond interaction between a water molecule and the CN group of 4-MBN. We found that these two categories of dynamic quantities exhibit opposite trends in response to applied potentials on the Au electrode. We anticipate that the present work will help improve our understanding of the interfacial dynamics of water in various electrolyte systems.

Aqueous Titania Interfaces.

Water-metal oxide interfaces are central to many phenomena and applications, ranging from material corrosion and dissolution to photoelectrochemistry and bioengineering. In particular, the discovery of photocatalytic water splitting on TiO2 has motivated intensive studies of water-TiO2 interfaces for decades. So far, a broad understanding of the interaction of water vapor with several TiO2 surfaces has been obtained. However, much less is known about liquid water-TiO2 interfaces, which are more relevant to many practical applications. Probing these complex systems at the molecular level is experimentally challenging and is sometimes possible only through computational studies. This review summarizes recent advances in the atomistic understanding, mostly through computational simulations, of the structure and dynamics of interfacial water on TiO2 surfaces. The main focus is on the nature, molecular or dissociated, of water in direct contact with low-index defect-free crystalline surfaces. The hydroxyls resulting from water dissociation are essential in the photooxidation of water and critically affect the surface chemistry of TiO2.

Dynamics and nano-rheology of interfacial water: general discussion.

Dynamics and nano-rheology of interfacial water: general discussion.

Water dynamics and sum-frequency generation spectra at electrode/aqueous electrolyte interfaces.

The dynamics of water at interfaces between an electrode and an electrolyte is essential for the transport of redox species and for the kinetics of charge transfer reactions next to the electrode. However, while the effects of electrode potential and ion concentration on the electric double layer structure have been extensively studied, a comparable understanding of dynamical aspects is missing. Interfacial water dynamics presents challenges since it is expected to result from the complex combination of water-water, water-electrode and water-ion interactions. Here we perform molecular dynamics simulations of aqueous NaCl solutions at the interface with graphene electrodes, and examine the impact of both ion concentration and electrode potential on interfacial water reorientational dynamics. We show that for all salt concentrations water dynamics exhibits strongly asymmetric behavior: it slows down at increasingly positively charged electrodes but it accelerates at increasingly negatively charged electrodes. At negative potentials water dynamics is determined mostly by the electrode potential value, but in contrast at positive potentials it is governed both by ion-water and electrode-water interactions. We show how these strikingly different behaviors are determined by the interfacial hydrogen-bond network structure and by the ions' surface affinity. Finally, we indicate how the structural rearrangements impacting water dynamics can be probed via vibrational sum-frequency generation spectroscopy.

Binding-induced lipid domains: Peptide-membrane interactions with PIP2 and PS

Cell signaling is an important process involving complex interactions between lipids and proteins. The myristoylated alanine-rich C-kinase substrate (MARCKS) has been established as a key signaling regulator, serving a range of biological roles. Its effector domain (ED), which anchors the protein to the plasma membrane, induces domain formation in membranes containing phosphatidylinositol 4,5-bisphosphate (PIP2) and phosphatidylserine (PS). The mechanisms governing the MARCKS-ED binding to membranes remain elusive. Here, we investigate the composition-dependent affinity and MARCKS-ED-binding-induced changes in interfacial environments using two-dimensional infrared spectroscopy and fluorescence anisotropy. Both negatively charged lipids facilitate the MARCKS-ED binding to lipid vesicles. Although the hydrogen-bonding structure at the lipid-water interface remains comparable across vesicles with varied lipid compositions, the dynamics of interfacial water show divergent patterns due to specific interactions between lipids and peptides. Our findings also reveal that PIP2 becomes sequestered by bound peptides, while the distribution of PS exhibits no discernible change upon peptide binding. Interestingly, PIP2 and PS become colocalized into domains both in the presence and absence of MARCKS-ED. More broadly, this work offers molecular insights into the effects of membrane composition on binding.

Uncovering the Dominant Role of an Extended Asymmetric Four-Coordinated Water Network in the Hydrogen Evolution Reaction.

In situ and accurate measurement of the structure and dynamics of interfacial water in the hydrogen evolution reaction (HER) is a well-known challenge because of the coupling of water among varied structures and its dual role as reactants and solvents. Further, the interference of bulk water and intricate interfacial interactions always hinders the probing of interfacial water. Surface-enhanced infrared absorption spectroscopy is extremely sensitive for the measurement of interfacial water; herein, we develop a nanoconfinement strategy by introducing nonaqueous ionic liquids to decouple and tailor the water structure in the electric double layer and further combined with molecular dynamics simulations, successfully gaining the correlation between isolated water, water clusters, and the water network with HER activity. Our results clearly disclosed that the potential-dependent asymmetric four-coordinated water network, whose connectivity could be regulated by hydrophilic and hydrophobic cations, was positively correlated with HER activity, which provided a pioneering guidance framework for revealing the function of water in catalysis, energy, and surface science.

Dynamical Crossover of Interfacial Water upon Melting of a Lipid Bilayer: Influence of Different Parts of the Headgroups.

All-atom molecular dynamics simulations of a 1,2-dimyristoyl-sn-glycero-3-phosphocholine bilayer in contact with liquid water were performed at different temperatures ranging from 285 to 320 K. We have investigated the heterogeneity and dynamical transitions in interfacial water as the lipid bilayer undergoes a melting transition. Results are obtained for water at the outer surface of the bilayer and for those buried more deeply in the lipid chains of the bilayer. It is found that lipid bilayer melting influences both the structure and dynamics of interfacial water. The number of interfacial water molecules shows a jump in the melting of the bilayer. The temperature dependence of the diffusivity and orientational relaxation of interfacial water molecules exhibits a dynamical crossover upon melting of the bilayer. The extent of dynamical crossover is found to be rather strong with significant changes in activation barriers for interfacial water around the carbonyl groups, which are deeply buried toward the lipid chains of the bilayer. The dynamical crossover gradually decreases as one moves further away from the outer surface, and it essentially vanishes for water in the region of 5-10 Å from the outer surface. It is found that the lipid melting-induced dynamical crossover of interfacial water is significant only for water that is in close proximity to the bilayer surface or deeply buried into it. The current results reveal that water molecules in different parts of the interface respond differently on melting of the bilayer. The current study also shows that the carbonyl-bound water molecules can play an important role in the phase transition of the bilayer as the temperature is raised through its melting point.

(Invited) Oxide-Water Interfaces from Ab Initio Based Deep Neural Network Simulations

Photo-electrocatalysis involving complex oxide-water interfaces is a highly promising technology for the sustainable production of fuels. However, probing these complex interfaces and gaining atomistic insights is still very challenging for current experimental methods, and is often only possible through accurate computational simulations. While first principles-based simulations provide the best accuracy, they are also limited to small system sizes and time-scales due to their high computational cost. Machine learned potentials that reproduce the accuracy of first-principles methods, while at the same time allowing the exploration of larger systems and timescales, are a promising approach to circumvent this issue. In this talk, I will discuss recent applications of deep neural network based molecular dynamics simulations to understand the structure and dynamics of interfacial water on photoelectrochemically relevant oxide surfaces. Focusing on TiO2 and IrO2 surfaces, we examine interfacial proton transfer and discuss how the water dissociation fraction and hydroxyl lifetimes depend on the surface atomic and electronic structures.

Effect of osmolytes on the EcoRI endonuclease: Insights into hydration and protein dynamics from molecular dynamics simulations

Osmolytes play an important role in cellular physiology by modulating the properties of proteins, including their molecular specificity. EcoRI is a model restriction enzyme whose specificity to DNA is altered in the presence of osmolytes. Here, we investigate the effect of two different osmolytes, glycerol and DMSO, on the dynamics and hydration of the EcoRI enzyme using molecular dynamics simulations. Our results show that the osmolytes, alter the essential dynamics of EcoRI. Particularly, we observe that the dynamics of the arm region of EcoRI which is involved in DNA binding is significantly altered. In addition, conformational free energy analyses reveals that the osmolytes bring about a change in the landscape similar to that of EcoRI bound to cognate DNA. We further observe that the hydration of the enzyme for each of the osmolyte is different, indicating that the mechanism of action of each of these osmolytes could be different. Further analyses of interfacial water dynamics using rotational autocorrelation function reveals that while the protein surface contributes to a slower tumbling motion of water, osmolytes, additionally contribute to the slowing of the angular motion of the water molecules. Entropy analysis also corroborates with this finding. We also find that the slowed rotational motion of interfacial waters in the presence of osmolytes contributes to a slowed relaxation of the hydrogen bonds between the interfacial waters and the functionally important residues in the protein. Taken together, our results show that osmolytes alter the dynamics of the protein by altering the dynamics of water. This altered dynamics, mediated by the changes in the water dynamics and hydrogen bonds with functionally important residues, may contribute to the altered specificity of EcoRI in the presence of osmolytes.

Molecular Dynamics Investigation of Nanoscale Hydrophobicity of Polymer Surfaces: What Makes Water Wet?

The wettability of a polymer surface─related to its hydrophobicity or tendency to repel water─can be crucial for determining its utility, such as for a coating or a purification membrane. While wettability is commonly associated with the macroscopic measurement of a contact angle between surface, water, and air, the molecular physics that underlie these macroscopic observations are not fully known, and anticipating the relative behavior of different polymers is challenging. To address this gap in molecular-level understanding, we use molecular dynamics simulations to investigate and contrast interactions of water with six chemically distinct polymers: polytetrafluoroethylene, polyethylene, polyvinyl chloride, poly(methyl methacrylate), Nylon-66, and poly(vinyl alcohol). We show that several prospective quantitative metrics for hydrophobicity agree well with experimental contact angles. Moreover, the behavior of water in proximity to these polymer surfaces can be distinguished with analysis of interfacial water dynamics, extent of hydrogen bonding, and molecular orientation─even when macroscopic measures of hydrophobicity are similar. The predominant factor dictating wettability is found to be the extent of hydrogen bonding between polymer and water, but the precise manifestation of hydrogen bonding and its impact on surface water structure varies. In the absence of hydrogen bonding, other molecular interactions and polymer mechanics control hydrophobic ordering. These results provide new insights into how polymer chemistry specifically impacts water-polymer interactions and translates to surface hydrophobicity. Such factors may facilitate the design or processing of polymer surfaces to achieve targeted wetting behavior, and presented analyses can be useful in studying the interfacial physics of other systems.

On the Role of Interfacial Water Dynamics for Electrochemical Stability of RuO2 and IrO2

AbstractBased on the coincident onsets of oxygen evolution reaction (OER) and metal dissolution for many metal‐oxide catalysts it was suggested that OER triggers dissolution. It is believed that both processes share common intermediates, yet exact mechanistic details remain largely unknown. For example, there is still no clear understanding as to why rutile IrO2 exhibits such an exquisite stability among water‐splitting electrocatalysts. Here, we employ density functional theory calculations to analyze interactions between water and the (110) surface of rutile RuO2 and IrO2 as a response to oxygen evolution involving lattice oxygen species. We observe that these oxides display qualitatively different interfacial behavior that should have important implications for their electrochemical stability. Specifically, it is found that IrO2(110) becomes further stabilized under OER conditions due to the tendency to form highly stable low oxidation state Ir(III) species. In contrast, Ru species at RuO2(110) are prone to facile reoxidation by solution water. This should facilitate the formation of high Ru oxidation state intermediates (>IV) accelerating surface restructuring and metal dissolution.

Effects of surface wettability on (001)-WO[formula omitted] and (100)-WSe[formula omitted]: A spin-polarized DFT-MD study

An extensive understanding of WO3 and WSe2 bulk crystalline structures and explicit solvent effects on (001)-WO3 and (100)-WSe2 facets are essential for design of efficient (photo) electrocatalysts. The atomistic level understanding of both WO3 and WSe2 bulk solids and how water solvation processes occur on WO3 and WSe2 facets are nowadays characterized by a noticeable lack of knowledge.Herein, forefront Density Functional Theory-based molecular dynamics have been conducted for assessing the role of an explicit water environment in the characterization of solid surfaces. Water at the interface and H-bonds environment, as well as WO3 and WSe2 surface activity, will be described in terms of surface wettability and interfacial water dynamics, revealing the relevance of treating explicitly liquid water and its dynamics in assessing catalytic features. We provide pieces of evidence of the hydrophobic character shown by (001)-WO3 and (100)-WSe2 facets. A preferential in-plane hydration structure of the first water layer has been detected at both (001)-WO3 and (100)-WSe2 water interface, in which the electric dipole moment of water molecules is re-oriented in a sort of 2-dimensional H-bond network. Bulk property calculations of WO3 and WSe2 are also provided.

The Dietary Nutrient Trimethylamine N-Oxide Affects the Phospholipid Vesicle Membrane: Probable Route to Adverse Intake.

Trimethylamine N-oxide (TMAO), a choline-containing dietary supplement obtained from red meat, egg, and other animal resources, on excess accumulation is known to cause cardiovascular diseases (CVDs) like atherosclerosis. To understand the molecular mechanism of the pathogenesis of TMAO-induced CVDs, we have set up 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) membrane in water that mimicked the endothelial cell membrane-blood interface of the artery wall and investigated the effect of an elevated concentration of TMAO on the membrane. We found that TMAO exerts an "action at a distance" mechanism through electrostatic force of attraction that significantly alters various properties of the membrane, like hydrophobicity, lateral organization, and interfacial water dynamics, which elevates the rigidity of the membrane. Such an effect was found to be further amplified in the presence of known causes of CVDs, i.e., high content of cholesterol (Chol). Therefore, TMAO-induced membrane rigidity may restrict the intrinsic elasticity of an artery membrane, expected to be introducing "hardening of the arteries", which makes the membrane atherosclerotic.

Advances in Atomic Force Microscopy: Imaging of Two- and Three-Dimensional Interfacial Water.

Interfacial water is closely related to many core scientific and technological issues, covering a broad range of fields, such as material science, geochemistry, electrochemistry and biology. The understanding of the structure and dynamics of interfacial water is the basis of dealing with a series of issues in science and technology. In recent years, atomic force microscopy (AFM) with ultrahigh resolution has become a very powerful option for the understanding of the complex structural and dynamic properties of interfacial water on solid surfaces. In this perspective, we provide an overview of the application of AFM in the study of two dimensional (2D) or three dimensional (3D) interfacial water, and present the prospect and challenges of the AFM-related techniques in experiments and simulations, in order to gain a better understanding of the physicochemical properties of interfacial water.

Explicit solvent effects on (1 1 0) ruthenium oxide surface wettability: Structural, electronic and mechanical properties of rutile RuO2 by means of spin-polarized DFT-MD

The structural, electronic and mechanical properties of crystalline ruthenium dioxide RuO2 in its rutile structure have been calculated via forefront spin-polarized Density Functional Theory (DFT) and DFT-Molecular Dynamics (DFT-MD) simulations. Notwithstanding RuO2 is known as a highly active catalyst for a wide number of (photo) electrochemical reactions in aqueous/humid environments, the study of the interaction of RuO2 surfaces with water has been confined largely to (static) surface science and water adsorption calculations. Herein, an atomistic understanding of bulk rutile RuO2 and explicit solvent effects on (110)-RuO2 facet are provided. We especially focus on the comprehension of the mechanistic interplay between surface wettability, interfacial water dynamics and surface chemical activity.Analysis and characterization of the interfacial water and H-bond environment reveal how explicit liquid water and its dynamics play a role in the surface reconstruction and in the hydrophobic nature of the (110)-RuO2 facet with a prevailing H-bond acceptor character. Moreover, we provide a dependence of physical and chemical properties, such as surface electric field and work function, from different degrees of surface wettability of the (110)-RuO2 facet. Results on bulk properties of crystalline ruthenium dioxide RuO2 are in good agreement with the nowadays available experimental evidences and previous DFT studies.

Ion adsorption stabilizes bulk nanobubbles

The mechanism leading to the extraordinary stability of bulk nanobubbles in aqueous solutions remains an outstanding problem in soft matter, modern surface science, and physical chemistry science. In this work, the stability of bulk nanobubbles in electrolyte solutions under different pH levels and ionic strengths is studied. Nanobubbles are generated via the technique of ultrasonic cavitation, and characterized for size, number concentration and zeta potential under ambient conditions. Experimental results show that nanobubbles can survive in both acidic and basic solutions with pH values far away from the isoelectric point. We attribute the enhanced stability with increasing acidity or alkalinity of the aqueous solutions to the effective accumulation of net charges, regardless of their sign. The kinetic stability of the nanobubbles in various aqueous solutions is evaluated within the classic DLVO framework. Further, by combining a modified Poisson-Boltzmann equation with a modified Langmuir adsorption model, we describe a simple model that captures the influence of ion species and bulk concentration and reproduce the dependence of the nanobubble’s surface potential on pH. We also discuss the apparent contradiction between quantitative calculation by ion stabilization model and experimental results. This essentially requires insight into the structure and dynamics of interfacial water on the atomic-scale.

Ordered Water Layer on the Macroscopically Hydrophobic Fluorinated Polymer Surface and Its Ultrafast Vibrational Dynamics.

Hydrophobic-like water monolayers have been predicted at the metal and some polar surfaces by theoretical simulations. However, direct experimental evidence for the presence of this water layer at surfaces, particularly at biomolecule and polymer surfaces, is yet to be validated at room temperature. Here we observe experimentally that an ordered molecular water layer is present at the hydrophobic fluorinated polymer such as polytetrafluoroethylene (PTFE) surface by using sum frequency generation vibrational spectroscopy. The macroscopic hydrophobicity of PTFE surface is actually hydrophilic at the molecular level. The macroscopically hydrophobic character of PTFE is indeed resulting from the hydrophobicity of the ordered two-dimension (2D) water layer, in which cyclic water tetramer structure is found. The water layer at humidity of ≤40% has a vibrational relaxation time of 550 ± 60 fs. The vibrational relaxation time in the frequency range of 3200-3400 cm-1 shows remarkable difference from the interfacial water at the air/H2O interface and the lipid/H2O interface. No discernible frequency dependence of the vibrational relaxation time is observed, indicating the homogeneous dynamics of OH groups in the water layer. These insights into the water layer at the macroscopically hydrophobic surface may contribute to a better understanding of the hydrophobic interaction and interfacial water dynamics.

Structure and Dynamics of Interfacial Water on Muscovite Surface under Different Temperature Conditions (298 K to 673 K): Molecular Dynamics Investigation

We performed molecular dynamics (MD) simulations to study structure, stability, and dynamics of the water adsorption layer on muscovite mica at several temperatures (from 298 K to 673 K) and pressures (0.1 MPa, 10 MPa, and 50 MPa). We studied the structure of the adsorption layers with three characteristic peaks of density and orientation of H2O molecules in one-dimensional and two-dimensional profiles. The results show that the water adsorption layers become less structured and more mobile as the temperature increases. We also found the first and the second layers are less diffusive than the third one, and the difference of diffusivity gets unclear as the temperature increases. Finally, we discuss implications to hydration forces and wettability, which are significant interfacial properties of the multiphase fluids system such as water/gas/mineral systems, from the viewpoint of water adsorption film with nanometer thickness.

Dehydration induced dynamical heterogeneity and ordering mechanism of lipid bilayers.

Understanding the influence of dehydration on the membrane structure is crucial to control membrane functionality related to domain formation and cell fusion under anhydrobiosis conditions. To this end, we perform all-atom molecular dynamic simulations of 1,2-dimyristoyl-sn-glycero-3-phosphocholine dimyristoylphosphatidylcholine lipid membranes at different hydration levels at 308 K. As dehydration increases, the lipid area per head group decreases with an increase in bilayer thickness and lipid order parameters indicating bilayer ordering. Concurrently, translational and rotational dynamics of interfacial water (IW) molecules near membranes slow down. On the onset of bilayer ordering, the IW molecules exhibit prominent features of dynamical heterogeneity evident from non-Gaussian parameters and one-dimensional van Hove correlation functions. At a fully hydrated state, diffusion constants (D) of the IW follow a scaling relation, D∼τα -1, where the α relaxation time (τα) is obtained from self-intermediate scattering functions. However, upon dehydration, the relation breaks and the D of the IW follows a power law behavior as D∼τα -0.57, showing the signature of glass dynamics. τα and hydrogen bond lifetime calculated from intermittent hydrogen bond auto-correlation functions undergo a similar crossover in association with bilayer ordering on dehydration. The bilayer ordering is accompanied with an increase in fraction of caged lipids spanned over the bilayer surface and a decrease in fraction of mobile lipids due to the non-diffusive dynamics. Our analyses reveal that the microscopic mechanism of lipid ordering by dehydration is governed by dynamical heterogeneity. The fundamental understanding from this study can be applied to complex bio-membranes to trap functionally relevant gel-like domains at room temperature.