Insertion Loss Research Articles

Wideband bandpass filter with ultra-wide stopband based on cross-shaped parallel coupled lines

A broadband out-of-band rejection capability and multiple transmission zeros of wideband bandpass filter are proposed and validated in this article, which employ quadruple anti-parallel coupled-line structures to form a novel cross-shaped resonator planar topology. The centered frequency of the single wideband bandpass filter designed for verification is located at 2.4 GHz (f 0) with a fractional bandwidth of 50%. The interaction of crossed multiple anti-coupled lines with a lowpass-loaded fan constitutes the wideband with nine transmission zeros in the 5 f 0 frequency range for improved suppression extending to 26.5 GHz (10.7 f 0) with a suppression level of 12.5 dB. Moreover, the designed prototype filter is implemented and tested with a measured minimum insertion loss of 0.9 dB. Good agreement between the measured and simulated results is attained to successfully validate the correctness of the proposed design approach.

A flat-top arrayed waveguide grating base on cascading ‘A’ shape multimode interference

Today, large bandwidth is required to increase data transmission speeds, this requires an optimized design of the photonic devices. To achieve increasing bandwidth in the wavelength division multiplexing device’s arrayed waveguide grating (AWG). We have cascaded a special ‘A’ shape multimode interference (MMI) structure at the end of the input waveguide. ‘A’ shape structure is better able to get the ideal light field distribution, making the flattening effect more perfect. The ‘A’ shape MMI is designed by the linear spreading equation, the structure of the MMI can be easily and conveniently manufactured in a practical application. Simulation results show that increasing the 1 dB bandwidth to 0.7 nm and the 3 dB bandwidth to 1.6 ± 0.2 nm, the insertion loss is measured at 3.5 ± 0.3 dB, and the channel crosstalk is below −30 dB. It paves the path to achieve increasing bandwidth of AWG.

Strong microwave squeezing above 1 Tesla and 1 Kelvin.

Squeezed states of light have been used extensively to increase the precision of measurements, from the detection of gravitational waves to the search for dark matter. In the optical domain, high levels of vacuum noise squeezing are possible due to the availability of low loss optical components and high-performance squeezers. At microwave frequencies, however, limitations of the squeezing devices and the high insertion loss of microwave components make squeezing vacuum noise an exceptionally difficult task. Here we demonstrate direct measurements of high levels of microwave squeezing. We use an ultra-low loss setup and weakly-nonlinear kinetic inductance parametric amplifiers to squeeze microwave noise 7.8(2) dB below the vacuum level. The amplifiers exhibit a resilience to magnetic fields and permit the demonstration of large squeezing levels inside fields of up to 2 T. Finally, we exploit the high critical temperature of our amplifiers to squeeze a warm thermal environment, achieving vacuum level noise at a temperature of 1.8 K. These results enable experiments that combine squeezing with magnetic fields and permit quantum-limited microwave measurements at elevated temperatures, significantly reducing the complexity and cost of the cryogenic systems required for such experiments.

Enhancing modulation performance by design of hybrid plasmonic optical modulator integrating multi-layer graphene and TiO2 on silicon waveguides

A novel way to enhance modulation performance is through the design of a hybrid plasmonic optical modulator that integrates multi-layer graphene and TiO2 on silicon waveguides. In this article, a design is presented of a proposed modulator based on the use of the two-dimensional finite difference eigenmode solver, the three-dimensional eigenmode expansion solver, and the CHARGE solver. Leveraging inherent graphene properties and utilizing the subwavelength confinement capabilities of hybrid plasmonic waveguides (HPWs), we achieved a modulator design that is both compact and highly efficient. The electrical bandwidth f 3dB is at 460.42 GHz and it reduces energy consumption to 12.17 fJ/bit with a modulator that functions at a wavelength of 1.55 μm. According to our simulation results, our innovation was the optimization of the third dielectric layer’s thickness, setting the stage to achieve greater modulation depths. This synergy between graphene and HPWs not only augments subwavelength confinement, but also optimizes light–graphene interaction, culminating in a markedly enhanced modulation efficiency. As a result, our modulator presents a high extinction ratio and minimized insertion loss. Furthermore, it exhibits polarization insensitivity and a greater bandwidth. Our work sets a new benchmark in optical communication systems, emphasizing the potential for the next generation of chip-scale with high-efficiency optical modulators that significantly outpace conventional graphene-based designs.

Compact, low-loss, and high-polarized-extinction ratio terahertz TM-pass polarizer based on a hybrid plasmonic waveguide with a graphene ridge

A compact, low-loss, and high-polarized-extinction ratio TM-pass polarizer based on a graphene hybrid plasmonic waveguide (GHPW) has been demonstrated for the terahertz band. A ridge coated by a graphene layer and the hollow HPW with a semiround arch (SRA) Si core is introduced to improve structural compactness and suppress the loss. Based on this, a TM-pass polarizer has been designed that can effectively cut off the unwanted TE mode, and the TM mode passes with negligible loss. By optimizing the angle of the ridge, the height of the ridge, air gap height, and the length of the tapered mode converter, an optimum performance with a high polarization extinction ratio of 30.28 dB and a low insert loss of 0.4 dB is achieved in the 3 THz band. This work provides a scheme for the design and optimization of polarizers in the THz band, which has potential application value in integrated terahertz systems.

High‐Efficiency Fiber‐Chip Edge Coupler for Near‐Ultraviolet Integrated Photonics

High‐Efficiency Fiber‐Chip Edge Coupler for Near‐Ultraviolet Integrated Photonics

Bandpass frequency selective surfaces with fast roll-off characteristics

We propose a bandpass frequency selective surface (FSS) with fast cut-off characteristics and low insertion loss. It consists of a compact high-frequency hybrid compression board with five metal layers, two Rogers RO4003C layers, and two F4B layers. The hierarchical fitting of equivalent circuits is utilized to analyze the FSS, which maintains angular stability for dual-polarized electromagnetic waves at incidence angles of less than 20 degrees. Under normal incidence, transmission amplitudes in the K-band exceed −0.87 dB. Furthermore, the proposed FSS achieves a roll-off rate of 87.6 dB GHz−1, which can be applied in dual-frequency observing systems for millimeter astronomy.

Compact multichannel reconfigurable mode demultiplexer enabled by phase change material

The reconfigurable mode demultiplexer is a crucial component for flexibly routing modes into different channels in on-chip multimode photonic systems with enhanced information processing capabilities. In this paper, we present a multichannel reconfigurable mode demultiplexer enabled by ultralow-loss phase-changing Sb2Se3. By harnessing the phase-change-mediated mode coupling in asymmetric directional couplers (ADCs), one or more of the higher-order modes including TE1, TE2 and TE3 modes could be selectively dropped from the bus waveguide with low losses. With an optimized ADCs structure, the proposed mode demultiplexer demonstrates insertion loss less than 0.227 dB in the ON (amorphous) state and the extinction ratios large than 23.28 dB over the C-band. By coupling the access waveguides of the higher-order mode in parallel on both sides of the bus waveguide, the device size can be compact with a footprint of ∼ 7 × 75 µm2, and this design approach can be further extended to enable more higher-order mode multiplexing.

Mode Heterogeneous Multimode Power Splitter Based on Cascaded Mode-Dependent Splitters and Converters

To the best of our knowledge, a novel concept of mode heterogeneity for the design of multimode devices is presented in this paper and applied to the design of scalable multimode power splitters. Based on a cascade of mode-dependent splitters and converters, we achieve beam splitting and mode conversion for four modes from TE0 to TE3 in the bandwidth from 1525 nm to 1560 nm. The measurements of the device at 1550 nm show excellent performance, with the insertion loss ranging from 0.16 dB to 0.63 dB, crosstalk all below −16.71 dB, and power uniformity between 0.026 dB and 0.168 dB.

A super-compact wideband bandpass filter using capacitor-loaded coupled lines

Abstract A wideband bandpass filter (BPF) using capacitor-loaded coupled lines is proposed with super-compact circuit size and very simple structure. By loading three lumped capacitors in parallel to three same pairs of coupled lines, three transmission poles and four transmission zeros can be achieved and they can be calculated by input admittance derivation. To verify the design, a wideband BPF prototype with center frequency at 1.34 GHz is fabricated, whose measured 3-dB fractional bandwidth is 98.5 % (0.68–2 GHz), in-band insertion loss is less than 0.5 dB, return loss is greater than 17.5 dB, and circuit size is only 0.24 λ g × 0.02 λ g (λ g: guided wavelength at the center frequency).

Design and simulation of a compact plasmonic photonic crystal fiber filter with wide band and high extinction ratio

In order to realize the performance optimization and function expansion of modern all-optical systems, this work presents a compact plasmonic photonic crystal fiber (PCF) filter, using finite element tool. The deposited gold and graphene layers within the elliptical pores interact with the transmitted light, creating surface plasmon resonance (SPR) effect that amplifies the energy difference between x- and y-polarized light greatly. The simulation results indicate that the structural parameters are configured with the cladding holes' diameter of 0.6 μm, the large-holes’ diameter of 1.2 μm, the inner small-holes’ diameter of 0.2 μm, the lattice constant of 2.0 μm, the elliptical holes' minor axis length of 0.45 μm, the elliptical holes' major axis length of 1.30 μm, the gold layer thickness of 50 nm, and the graphene layer thickness of 20 nm, the central wavelength of the proposed PCF filter is 1.56 μm. When the length of this PCF filter is 1 mm, a maximum extinction ratio (ER) of 133 dB, an operating bandwidth exceeding 800 nm, covering two common communication windows of 1.31 μm and 1.55 μm, as well as a low insertion loss (IL) of 0.59 dB can be achieved. What's more, the feasibility of fabricating the device is also examined. This filter with compactness, broadband and high-extinction demonstrates promising applications in optical communication, optical sensing, optical computing, and various other fields.

Automated fiber switch with path verification enabled by an AI-powered multi-task mobile robot

As the capacity of optical transport networks undergoes significant growth, there is an ongoing discussion on how to effectively leverage both spectral and spatial degrees of freedom to scale future network capacity. This paper presents an artificial intelligence (AI)-powered multi-task robot comprising a collaborative robotic arm and a mobile robotic base designed for optical network automation. The robot demonstrates the capability of direct fiber switching, establishing static fiber links that consume zero power and have minimal insertion loss from fiber connectors. As a precautionary measure before physically switching fiber cables, the robot performs path verification by detecting robot-driven events using real-time coherent receivers, aiming to avoid accidental unplugging. Additionally, the robot showcases its mobility by efficiently navigating between different network racks and rooms while executing various tasks. Implementing the automation of network operations using robots has the potential to reduce both capital and operational expenditures.

Femtosecond-laser-inscribed cladding waveguides in KTiOPO4 crystal for second-harmonic generation and Y-branch splitters

In this study, the fabrication of straight- and Y-branch-cladding waveguides in KTiOPO4 crystals using femtosecond laser-direct writing is described. The second-harmonic generation (SHG) of green light through the cladding waveguides was realized using a pulsed-wave pump at 1,064 nm. The guiding properties of straight-cladding waveguides fabricated by varying the laser-writing conditions were investigated. The minimum insertion loss was approximately 2.0 dB at 1,064 nm. Confocal micro-Raman spectroscopy was used to investigate the lattice micro-modifications. The maximum SHG conversion efficiency of the straight-cladding waveguide reached 31.4% with a maximum output power of 79.29 mW from an input power of 252.6 mW. The performances of the Y-branch splitters with splitting angles ranging from 0.5° to 2.6° were characterized at 1,064 nm, showing excellent properties, including symmetrical output ends and approximately equal splitting ratios. An SHG conversion efficiency of 13.4% and maximum output power of 33.63 mW were achieved in the Y-branch splitter with a splitting angle of 1.0°. These findings support potential applications in constructing compact-frequency converters by using femtosecond laser-written KTiOPO4 depressed-cladding waveguides.

Multiphysics simulations of a cylindrical waveguide optical switch using phase change materials on silicon

This work presents the design and multiphysics simulation of a cylindrical waveguide-based optical switch using germanium-antimony-tellurium (GST) as an active phase change material. The innovative cylindrical architecture is theoretically analyzed and evaluated at 1550 nm wavelength for telecommunication applications. The dispersion relation is derived analytically for the first time to model the optical switch, while finite element method (FEM) and finite difference time domain (FDTD) techniques are utilized to simulate the optical modes, light propagation, and phase change dynamics. The fundamental TE01 and HE11 modes are studied in detail, enabling switching between low-loss amorphous and high-loss crystalline GST phases. Increasing the GST thickness is found to increase absorption loss in the crystalline state but also slows down phase transition kinetics, reducing switching speeds. A 10 nm GST layer results in competitive performance metrics of 0.79 dB insertion loss, 13.47 dB extinction ratio, 30 nJ average power consumption, and 3.5 Mb/s bit rate. The combined optical, thermal, and electrical simulation provides comprehensive insights towards developing integrated non-volatile photonic switches and modulators utilizing phase change materials.

Compact supermode switch for photonic matrix processing.

A 2 × 2 switch based on differential effective thermo-optic (TO) coefficients of waveguide supermodes is proposed and experimentally demonstrated as a more compact alternative to Mach-Zehnder interferometer (MZI)-based switches used in coherent photonic matrix processing networks. The total waveguide width of the device is 1.335 μm. Using a novel, to the best of our knowledge, supermode coupler with a wideband 3-dB coupling ratio, the switch was engineered to have on-off extinction ratios (ERs) ranging from 24.1 to 38.9 dB for the two output ports over a 135 nm bandwidth. Insertion losses (ILs) of less than 0.3 and 0.4 dB over the 100 nm bandwidth were measured for bar and cross transmission, respectively. The waveguide width error tolerance is +/-30 nm. The proposed device has the potential to improve the scalability of a programmable coherent mesh for matrix processing by increasing the integration density without sacrificing the overall accuracy or limiting the operational wavelength range of the mesh.

Microstrip Quasi-Elliptic Absorptive Bandpass Filter with Ultra-Wide Reflectionless Range and Compact Size

Absorptive bandpass filters (ABPFs) are highly attractive in modern microwave communication systems due to their ability to internally absorb the harmful stopband RF-power reflections. This paper reports an approach to designing quasi-elliptic ABPFs with ultra-wide reflectionless range, enhanced selectivity, and compact size. The method is realized based on a fourth-order quasi-elliptic absorptive lowpass filter (ALPF) prototype with a simplified structure. This ALPF prototype exhibits both good impedance-matching over the whole normalized frequency domain and an adjustable transmission zero close to the passband. By applying an equivalent impedance transformer model, a coupled-line-based ABPF scheme is devised from the ALPF prototype, which eliminates conventional dispersive transmission line inverters, resulting in an ultra-wide reflectionless range and a compact size. Closed-form equations are derived to support the filter synthesis. A 2.45 GHz microstrip ABPF with 30% fractional bandwidth is designed for verification. The measured minimum in-band insertion loss is 0.83 dB and the reflectionless range of return loss better than 10 dB is from DC to 12.88 GHz. Both the upper and lower stopband suppression exceed 20 dB, with the upper stopband extending up to 6.80 GHz. The upper and lower out-of-band roll-off rates are 93.9 and 121.4 dB/GHz, respectively. The overall circuit size is 0.12 λg2.

Design and fabrication of a microstrip triplexer with wide flat channels for multi-band 5G applications.

In this paper, a new microstrip triplexer is designed to work at 2.5 GHz, 4.4 GHz and 6 GHz for mid-band 5G applications. All channels are flat with three low group delays (GDs) of 0.84 ns, 0.75 ns and 0.49 ns, respectively. Compared to the previously reported works, the proposed triplexer has the minimum group delay. The designed triplexer has 18.2%, 13.7%, 23.6% fractional bandwidths (FBW%) at 2.5 GHz, 4.4 GHz and 6 GHz, respectively. The obtained insertion losses (ILs) are low at all channels. These features are obtained without a noticeable increase in the overall size. A novel and simple resonator is used to design the proposed triplexer, which includes two pairs of coupled lines combined with a shunt stub. A perfect mathematical analysis is performed to find the resonator behavior and the layout optimization. The type of shunt stub is determined mathematically. Also, the smallness or largeness of some important physical dimensions is determined using the proposed mathematical analysis. Finally, the designed triplexer is fabricated and measured, where the measurement results verify the simulations.

Research on Low-Insertion-Loss Packaging Materials for DC-6 GHz Attenuation Chips

Research on Low-Insertion-Loss Packaging Materials for DC-6 GHz Attenuation Chips

Femtosecond laser direct writing large-area fiber Bragg grating based on diaphragm shaping

We propose and demonstrate a new method of direct writing large-area fiber Bragg grating by femtosecond laser through the coating. By adding an adjustable diaphragm before the focusing objective, we can precisely control the length of the refractive index modulation line along the femtosecond laser incident direction up to 29.1 µm. In combination with femtosecond laser scanning fabrication technology, a uniform refractive index modulation plane can be inscribed in the fiber in a single scanning. Based on the plane-by-plane inscription method, we have fabricated a high-quality high-reflectivity fiber Bragg grating and a chirped fiber Bragg grating on 20/400 double-clad fiber core. The reflectivity of both gratings is greater than 99%, and the insertion loss is as low as 0.165 dB and 0.162 dB, respectively. The thermal slope of chirped fiber Bragg grating without any refrigeration is 0.088 °C/W and there is no obvious temperature increase when using the water cooling. Therefore, the fabrication method of large-area fiber Bragg grating based on diaphragm shaping can efficiently fabricate high-quality fiber Bragg grating in the large core diameter fiber, which has an important application prospect in high-power all-fiber oscillators, especially all-fiber oscillators in special wavebands.

Omni-polarized Faraday isolator based on non-Hermitian Faraday system

Non-Hermitian systems have recently attracted significant attention in photonics due to the realization that the interplay between gain and loss can lead to entirely new and unexpected features. Here, we propose and demonstrate a non-Hermitian Faraday system capable of non-reciprocal omni-polarizer action at the exceptional point. Notably, both forward and backward propagating light with arbitrary polarization converge to the same polarization state. Leveraging the robustness and non-reciprocity of the non-Hermitian Faraday system, we realize an omni-polarized Faraday isolator that can effectively isolate any polarized light without the need for a polarizer at the incident port of backward propagation. Remarkably, under the given parameter configuration, the isolator achieves a maximum isolation ratio of approximately 100 dB and a minimum isolation ratio of around 45 dB for various polarized light, accompanied by near-zero insertion loss. Furthermore, our research reveals the remarkable tolerance of the non-Hermitian Faraday isolator to nonlinear effects. This unique characteristic allows us to harness nonlinear effects to achieve various optical functions, all while maintaining excellent isolation performance. The proposed non-Hermitian Faraday system paves the way for the realization of magnetically or optically switchable non-reciprocal devices.