Industrial Protein Production Research Articles

Different Routes of Protein Folding Contribute to Improved Protein Production in Saccharomyces cerevisiae.

Protein folding is often considered the flux controlling process in protein synthesis and secretion. Here, two previously isolated Saccharomyces cerevisiae strains with increased α-amylase productivity were analyzed in chemostat cultures at different dilution rates using multi-omics data. Based on the analysis, we identified different routes of the protein folding pathway to improve protein production. In the first strain, the increased abundance of proteins working on the folding process, coordinated with upregulated glycogen metabolism and trehalose metabolism, helped increase α-amylase productivity 1.95-fold compared to the level in the original strain in chemostat culture at a dilution rate of 0.2/h. The second strain further strengthened the folding precision to improve protein production. More precise folding helps the cell improve protein production efficiency and reduce the expenditure of energy on the handling of misfolded proteins. As calculated using an enzyme-constrained genome-scale metabolic model, the second strain had an increased productivity of 2.36-fold with lower energy expenditure than that of the original under the same condition. Further study revealed that the regulation of N-glycans played an important role in the folding precision control and that overexpression of the glucosidase Cwh41p can significantly improve protein production, especially for the strains with improved folding capacity but lower folding precision. Our findings elucidated in detail the mechanisms in two strains having improved protein productivity and thereby provided novel insights for industrial recombinant protein production as well as demonstrating how multi-omics analysis can be used for identification of novel strain-engineering targets.IMPORTANCE Protein folding plays an important role in protein maturation and secretion. In recombinant protein production, many studies have focused on the folding pathway to improve productivity. Here, we identified two different routes for improving protein production by yeast. We found that improving folding precision is a better strategy. Dysfunction of this process is also associated with several aberrant protein-associated human diseases. Here, our findings about the role of glucosidase Cwh41p in the precision control system and the characterization of the strain with a more precise folding process could contribute to the development of novel therapeutic strategies.

High-level production of glucose oxidase in Pichia pastoris: Effects of Hac1p overexpression on cell physiology and enzyme expression

Secretion is a common bottleneck in the production of industrial proteins. Although overexpression of the unfolded protein response regulator Hac1p has been widely used to enhance protein secretion, its effects on the physiology of host cells were often overlooked, which would attenuate and even neutralize its beneficial effects on overall protein production.In order to achieve high-level glucose oxidase (GOX) production in Pichia pastoris, we used a set of Hac1p homologues from Saccharomyces cerevisiae (ScHac1p), P. pastoris (PpHac1p), Trichoderma reesei (TrHac1p) and Homo sapiens (HsXbp1), to evaluate the effects of Hac1p overexpression on the secretion capacity, cell physiology and overall enzyme production in P. pastoris strains containing different copies of the GOX gene. Results showed that overexpression of Hac1ps was able to remarkably alleviate the secretion bottleneck in the 3-copy strain, to improve its GOX secretion capacity by 21.2–140.2 % and its overall enzyme production by 23.7–69.2 %. However, overexpression of ScHac1p, PpHac1p and TrHac1p led to reduced cell growth in GS-3GOX, possibly due to increased oxidative stress. Overexpression of ScHac1p and PpHac1p in the 6-copy strain (resulting in GS-6GOX-Sc and GS-6GOX-Pp, respectively) further increased the overall GOX production levels by 88.9–103.3 %, and GS-6GOX-Pp exhibited the highest overall GOX production and GOX secretion capacity among all constructed strains. Nevertheless, in addition of significantly reduced growth, loss of GOX gene was also observed for GS-6GOX-Pp and GS-6GOX-Sc during the fermentation process. With higher induction cell density and co-feeding of yeast extract, the GOX titer of GS-6GOX-Pp reached 2125.3 U/mL on 1-liter fermentor.This study not only achieves a record high GOX production level but also provides new insights into secretion pathway engineering using Hac1p overexpression strategy.

The length of ribosomal binding site spacer sequence controls the production yield for intracellular and secreted proteins by Bacillus subtilis

BackgroundBacillus subtilis is widely used for the industrial production of recombinant proteins, mainly due to its high secretion capacity, but higher production yields can be achieved only if bottlenecks are removed. To this end, a crucial process is translation initiation which takes place at the ribosome binding site enclosing the Shine Dalgarno sequence, the start codon of the target gene and a short spacer sequence in between. Here, we have studied the effects of varying spacer sequence lengths in vivo on the production yield of different intra- and extracellular proteins.ResultsThe shuttle vector pBSMul1 containing the strong constitutive promoter PHpaII and the optimal Shine Dalgarno sequence TAAGGAGG was used as a template to construct a series of vectors with spacer lengths varying from 4 to 12 adenosines. For the intracellular proteins GFPmut3 and β-glucuronidase, an increase of spacer lengths from 4 to 7–9 nucleotides resulted in a gradual increase of product yields up to 27-fold reaching a plateau for even longer spacers. The production of secreted proteins was tested with cutinase Cut and swollenin EXLX1 which were N-terminally fused to one of the Sec-dependent signal peptides SPPel, SPEpr or SPBsn. Again, longer spacer sequences resulted in up to tenfold increased yields of extracellular proteins. Fusions with signal peptides SPPel or SPBsn revealed the highest production yields with spacers of 7–10nt length. Remarkably, fusions with SPEpr resulted in a twofold lower production yield with 6 or 7nt spacers reaching a maximum with 10–12nt spacers. This pattern was observed for both secreted proteins fused to SPEpr indicating a dominant role also of the nucleotide sequence encoding the respective signal peptide for translation initiation. This conclusion was corroborated by RT qPCR revealing only slightly different amounts of transcript. Also, the effect of a putative alternative translation initiation site could be ruled out.ConclusionOur results confirm the importance of the 5′ end sequence of a target gene for translation initiation. Optimizing production yields thus may require screenings for optimal spacer sequence lengths. In case of secreted proteins, the 5′ sequence encoding the signal peptide for Sec-depended secretion should also be considered.

Regulating Strategies for Producing Carbohydrate Active Enzymes by Filamentous Fungal Cell Factories.

Filamentous fungi are important eukaryotic organisms crucial in substrate degradation and carbon cycle on the earth and have been harnessed as cell factories for the production of proteins and other high value-added products in recent decades. As cell factories, filamentous fungi play a crucial role in industrial protein production as both native hosts and heterologous hosts. In this review, the regulation strategies of carbohydrate active enzyme expression at both transcription level and protein level are introduced, and the transcription regulations are highlighted with induction mechanism, signaling pathway, and promoter and transcription factor regulation. Afterward, the regulation strategies in protein level including suitable posttranslational modification, protein secretion enhancement, and protease reduction are also presented. Finally, the challenges and perspectives in this field are discussed. In this way, a comprehensive knowledge regarding carbohydrate active enzyme production regulation at both transcriptional and protein levels is provided with the particular goal of aiding in the practical application of filamentous fungi for industrial protein production.

A programmable CRISPR/Cas9-based phage defense system for Escherichia coli BL21(DE3)

Escherichia coli BL21 is arguably the most popular host for industrial production of proteins, and industrial fermentations are often plagued by phage infections. The CRISPR/Cas system is guided by a gRNA to cleave a specific DNA cassette, which can be developed into a highly efficient programable phage defense system. In this work, we constructed a CRISPR/Cas system targeting multiple positions on the genome of T7 phage and found that the system increased the BL21’s defense ability against phage infection. Furthermore, the targeted loci on phage genome played a critical role. For better control of expression of CRISPR/Cas9, various modes were tested, and the OD of the optimized strain BL21(pT7cas9, pT7-3gRNA, prfp) after 4 h of phage infection was significantly improved, reaching 2.0, which was similar to the control culture without phage infection. Although at later time points, the defensive ability of CRISPR/Cas9 systems were not as obvious as that at early time points. The viable cell count of the engineered strain in the presence of phage was only one order of magnitude lower than that of the strain with no infection, which further demonstrated the effectiveness of the CRISPR/Cas9 phage defense system. Finally, the engineered BL21 strain under phage attack expressed RFP protein at about 60% of the un-infected control, which was significantly higher than the parent BL21. In this work, we successfully constructed a programable CRISPR/Cas9 system to increase the ability of E. coli BL21’s to defend against phage infection, and created a resistant protein expression host. This work provides a simple and feasible strategy for protecting industrial E. coli strains against phage infection.

Direct Liquid-Culture Screening for Evaluating the Production of Heterologous Proteins Using an Auxotrophic Mutant of Aspergillus Oryzae.

Aspergillus oryzae, a filamentous fungus, is one of the most widely used hosts for industrial applications including large-scale production of proteins. A polyethylene glycol (PEG)-mediated protoplast transformation method is generally used for the introduction of heterologous genes into A. oryzae. The conventional method typically requires three weeks for the screening of favorable transformants. Here, a new technique, the direct liquid-culture (DLC) screening method, is introduced which reduces the screening time to six days in a 200 mL flask format or to 10 days in a 24 well microplate format. The DLC screening method ensures the acquisition of positive transformants and evaluation of the secretory production of heterologous proteins in a single step, unlike the conventional screening method where two separate steps are required for the same. The protocol for PEG-mediated protoplast transformation of A. oryzae is described, which consists of five steps: preparation of fresh spore suspension, preculture, preparation of protoplasts, introduction of DNA, and DLC screening. For successful results in DLC screening, it is critical to use a nutrient-rich medium with optimized osmotic pressure. The protocol should further popularize the use of A. oryzae as a host of choice in the industrial production of proteins.

Facilitating Protein Expression with Portable 5'-UTR Secondary Structures in Bacillus licheniformis.

The 5'-untranslated region (5'-UTR) of prokaryotic mRNAs plays an essential role in post-transcriptional regulation. Bacillus species, such as Bacillus subtilis and Bacillus licheniformis, have gained considerable attention as microbial cell factories for the production of various valuable chemicals and industrial proteins. In this work, we developed a portable 5'-UTR sequence for enhanced protein output in the industrial strain B. licheniformis DW2. This sequence contains only ∼30 nt and forms a hairpin structure located right before the open reading frame. The optimized Shine-Dalgarno (SD) sequence was presented as a single strand on the loop of the hairpin for better ribosome recognition and recruitment. By optimizing the free energy of folding, this 5'-element could effectively enhance the expression of eGFP by ∼50-fold and showed good adaptability for other target proteins, including RFP, nattokinase, and keratinase. This 5'-UTR could promote the accessibility of both the SD sequence and start codon, leading to improved efficiency of translation initiation. Furthermore, the hairpin structure protected mRNA against 5'-exonucleases, resulting in enhanced mRNA stability. It is well-known that the stable structure at a ribosome binding site (RBS) impedes initiation in Escherichia coli. In this study, we presented a unique structure at a RBS that can effectively enhance protein production, which is an exception of this prevailing concept. By adjusting a single thermodynamic parameter and holding the other factors affecting protein output constant, a series of 5'-UTR elements with different expression strengths could be rationally designed for wide use in Bacillus sp.

Production of Extracellular Matrix Proteins in the Cytoplasm of E. coli: Making Giants in Tiny Factories.

Escherichia coli is the most widely used protein production host in academia and a major host for industrial protein production. However, recombinant production of eukaryotic proteins in prokaryotes has challenges. One of these is post-translational modifications, including native disulfide bond formation. Proteins containing disulfide bonds have traditionally been made by targeting to the periplasm or by in vitro refolding of proteins made as inclusion bodies. More recently, systems for the production of disulfide-containing proteins in the cytoplasm have been introduced. However, it is unclear if these systems have the capacity for the production of disulfide-rich eukaryotic proteins. To address this question, we tested the capacity of one such system to produce domain constructs, containing up to 44 disulfide bonds, of the mammalian extracellular matrix proteins mucin 2, alpha tectorin, and perlecan. All were successfully produced with purified yields up to 6.5 mg/L. The proteins were further analyzed using a variety of biophysical techniques including circular dichroism spectrometry, thermal stability assay, and mass spectrometry. These analyses indicated that the purified proteins are most likely correctly folded to their native state. This greatly extends the use of E. coli for the production of eukaryotic proteins for structural and functional studies.

Amyloid formation of bovine insulin is retarded in moderately acidic pH and by addition of short-chain alcohols

Protein aggregation and amyloid formation are associated with multiple human diseases, but are also a problem in protein production. Understanding how aggregation can be modulated is therefore of importance in both medical and industrial contexts. We have used bovine insulin as a model protein to explore how amyloid formation is affected by buffer pH and by the addition of short-chain alcohols. We find that bovine insulin forms amyloid fibrils, albeit with different rates and resulting fibril morphologies, across a wide pH range (2–7). At pH 4.0, bovine insulin displayed relatively low aggregation propensity in combination with high solubility; this condition was therefore chosen as basis for further exploration of how bovine insulin’s native state can be stabilized in the presence of short-chain alcohols that are relevant because of their common use as eluents in industrial-scale chromatography purification. We found that ethanol and isopropanol are efficient modulators of bovine insulin aggregation, providing a three to four times retardation of the aggregation kinetics at 30–35% (vol/vol) concentration; we attribute this to the formation of oligomers, which we detected by AFM. We discuss this effect in terms of reduced solvent polarity and show, by circular dichroism recordings, that a concomitant change in α-helical packing of the insulin monomer occurs in ethanol. Our results extend current knowledge of how insulin aggregates, and may, although bovine insulin serves as a simplistic model, provide insights into how buffers and additives can be fine-tuned in industrial production of proteins in general and pharmaceutical insulin in particular.

Non-conventional yeasts as superior production platforms for sustainable fermentation based bio-manufacturing processes

Non-conventional yeasts are an excellent option for a number of different industrial bioprocesses. They possess beneficial natural phenotypes, which translates to several fermentation advantages when compared to traditional hosts, like <i>Saccharomyces cerevisiae</i>. The non-conventional yeasts <i>Yarrowia lipolytica</i>, <i>Trichosporon oleaginosus</i>, <i>Kluyveromyces marxianus</i>, <i>Dekkera bruxellensis</i>, <i>Pichia kudriavzevii</i>, <i>Debaryomyces hansenii</i> and <i>Hansenula polymorpha</i>, are considered desirable industrial hosts due to their natural characteristics, including tolerance to several by-products and inhibitors, thermotolerance, salt resistance or osmo- and xerotolerance. Therefore, they are a great alternative for the industrial production of bioethanol, fine chemicals, lipids and recombinant proteins, among others. In this review, we summarize the best natural characteristics of those seven non-conventional yeasts and their use in industrial biotechnology, as well as the molecular/synthetic biology tools available for their genetic modification. Moreover, possible limitations regarding their performance in industrial fermentations and a list of challenges to overcome in the future are also discussed.

Recent Developments in Bioprocessing of Recombinant Proteins: Expression Hosts and Process Development.

Infectious diseases, along with cancers, are among the main causes of death among humans worldwide. The production of therapeutic proteins for treating diseases at large scale for millions of individuals is one of the essential needs of mankind. Recent progress in the area of recombinant DNA technologies has paved the way to producing recombinant proteins that can be used as therapeutics, vaccines, and diagnostic reagents. Recombinant proteins for these applications are mainly produced using prokaryotic and eukaryotic expression host systems such as mammalian cells, bacteria, yeast, insect cells, and transgenic plants at laboratory scale as well as in large-scale settings. The development of efficient bioprocessing strategies is crucial for industrial production of recombinant proteins of therapeutic and prophylactic importance. Recently, advances have been made in the various areas of bioprocessing and are being utilized to develop effective processes for producing recombinant proteins. These include the use of high-throughput devices for effective bioprocess optimization and of disposable systems, continuous upstream processing, continuous chromatography, integrated continuous bioprocessing, Quality by Design, and process analytical technologies to achieve quality product with higher yield. This review summarizes recent developments in the bioprocessing of recombinant proteins, including in various expression systems, bioprocess development, and the upstream and downstream processing of recombinant proteins.

Extracellular production of the engineered thermostable protease pernisine from Aeropyrum pernix K1 in Streptomyces rimosus

BackgroundThe thermostable serine protease pernisine originates from the hyperthermophilic Archaeaon Aeropyrum pernix and has valuable industrial applications. Due to its properties, A. pernix cannot be cultivated in standard industrial fermentation facilities. Furthermore, pernisine is a demanding target for heterologous expression in mesophilic heterologous hosts due to the relatively complex processing step involved in its activation.ResultsWe achieved production of active extracellular pernisine in a Streptomyces rimosus host through heterologous expression of the codon-optimised gene by applying step-by-step protein engineering approaches. To ensure secretion of fully active enzyme, the srT signal sequence from the S. rimosus protease was fused to pernisine. To promote correct processing and folding of pernisine, the srT functional cleavage site motif was fused directly to the core pernisine sequence, this way omitting the proregion. Comparative biochemical analysis of the wild-type and recombinant pernisine confirmed that the enzyme produced by S. rimosus retained all of the desired properties of native pernisine. Importantly, the recombinant pernisine also degraded cellular and infectious bovine prion proteins, which is one of the particular applications of this protease.ConclusionFunctional pernisine that retains all of the advantageous properties of the native enzyme from the thermophilic host was successfully produced in a S. rimosus heterologous host. Importantly, we achieved extracellular production of active pernisine, which significantly simplifies further downstream procedures and also omits the need for any pre-processing step for its activation. We demonstrate that S. rimosus can be used as an attractive host for industrial production of recombinant proteins that originate from thermophilic organisms.

Novel Promoters Derived from Chinese Hamster Ovary Cells via In Silico and In Vitro Analysis.

For the industrial production of recombinant proteins in mammalian cell lines, a high rate of gene expression is desired. Therefore, strong viral promoters are commonly used. However, these have several drawbacks as they override cellular responses, are not integrated into the cellular network, and thus can induce stress and potentially epigenetic silencing. Endogenous promoters potentially have the advantage of a better response to cellular state and thus a lower stress level by uncontrolled overexpression of the transgene. Such fine-tuning is typically achieved by endogenous enhancers and other regulatory elements, which are difficult to identify purely based on the genomic sequence. Here, Chinese hamster ovary (CHO) endogenous promoters and enhancers are identified using histone marks and chromatin states, ranked based on expression level and tested for normalized promoter strength. Successive truncation of these promoters at the 5'- and 3'-end as well as the combination with enhancers are identified in the vicinity of the promoter sequence further enhance promoter activity up to threefold. In an initial screen within stable cell lines, the strongest CHO promoter appears to be more stable than the human cytomegalovirus promoter with enhancer, making it a promising candidate for recombinant protein production and cell engineering applications. A deeper understanding of promoter functionality and response elements will be required to take full advantage of such promoters for cell engineering, in particular, for multigene network engineering applications.

Process Intensification for an Insect Antimicrobial Peptide Elastin-Like Polypeptide Fusion Produced in Redox-Engineered Escherichia coli.

Peptides and proteins containing disulfide bonds can be produced in Escherichia coli by targeting the oxidizing periplasm, co-expressing isomerases or chaperons, refolding from inclusion bodies, or by using redox-engineered E. coli strains. Thus far, protein expression in glutathione reductase and thioredoxin reductase deficient (Δgor ΔtrxB) E. coli strains has required a complex medium. However, a chemically defined medium suitable for large-scale production would be preferable for industrial applications. Recently, we developed a minimal medium supplemented with iron (M9i) for high-density cultivation using E. coli Rosetta gami B(DE3)pLysS cells. Here we show that M9i is suitable for the production of insect metalloproteinase inhibitor (IMPI), which contains five disulfide bonds, in the same E. coli strain. We demonstrated the scalability of the new fed-batch process by combining the scale-up criteria of constant dissolved oxygen (DO) and matching volumetric power inputs (P/V) at the borders of the stirrer cascade. Process intensification was achieved by investigating production feed rates and different induction times. We improved product titers by ~200-fold compared to the standard process in complex medium while maintaining the activity of the IMPI protein. Our results show for the first time that it is possible to produce active proteins containing multiple disulfide bonds in a Δgor ΔtrxB E. coli strain using M9i medium. The success of scale-up and process intensification shows that the industrial production of complex recombinant proteins in such strains using chemically defined M9i minimal medium is feasible.

Cell density-dependent auto-inducible promoters for expression of recombinant proteins in Pseudomonas putida.

SummaryInducible promoters such as Plac are of limited usability for industrial protein production with Pseudomonas putida. We therefore utilized cell density‐dependent auto‐inducible promoters for recombinant gene expression in P. putida KT2440 based on the RoxS/RoxR Quorum Sensing (QS) system of the bacterium. To this end, genetic regions upstream of the RoxS/RoxR‐regulated genes ddcA (PR ox132) and PP_3332 (PR ox306) were inserted into plasmids that mediated the expression of superfolder green fluorescent protein (sfGFP) and surface displayed mCherry, confirming their promoter functionalities. Mutation of the Pribnow box of PR ox306 to the σ70 consensus sequence (PR ox3061) resulted in a more than threefold increase of sfGFP production. All three promoters caused cell density‐dependent expression, starting transcription at optical densities (OD 578) of approximately 1.0 (PR ox132, PR ox306) or 0.7 (PR ox3061) as determined by RT‐qPCR. The QS dependency of PR ox306 was further shown by cultivating P. putida in media that had already been used for cultivation and thus contained bacterial signal molecules. The longer P. putida had grown in these media before, the earlier protein expression in freshly inoculated P. putida appeared with PR ox306. This confirmed previous findings that a bacterial compound accumulates within the culture and induces protein expression.

An Engineered B.subtilis Inducible Promoter System with over 10 000-Fold Dynamic Range.

Bacillus subtilis is the leading model Gram-positive bacterium, and a widely used chassis for industrial protein production. However, B.subtilis research is limited by a lack of inducible promoter systems with low leakiness and high dynamic range. Here, we engineer an inducible promoter system based on the T7 RNA Polymerase (T7 RNAP), the lactose repressor LacI, and the chimeric promoter PT7lac, integrated as a single copy in the B.subtilis genome. In the absence of IPTG, LacI strongly represses T7 RNAP and PT7lac and minimizes leakiness. Addition of IPTG derepresses PT7lac and simultaneously induces expression of T7RNAP, which results in very high output expression. Using green fluorescent and β-galactosidase reporter proteins, we estimate that this LacI-T7 system can regulate expression with a dynamic range of over 10 000, by far the largest reported for an inducible B.subtilis promoter system. Furthermore, LacI-T7 responds to similar IPTG concentrations and with similar kinetics as the widely used Phy-spank IPTG-inducible system, which we show has a dynamic range of at most 300 in a similar genetic context. Due to its superior performance, our LacI-T7 system should have broad applications in fundamental B.subtilis biology studies and biotechnology.

Possibilities for Engineered Insect Tissue as a Food Source

Due to significant environmental concerns associated with industrial livestock farming, it is vital to accelerate the development of sustainable production methods for foods. Cellular agriculture presents an option, by using cell culture, as opposed to whole animals, to generate foods, including meats, eggs, and dairy products. The cost-effective scale-up of such cultured products requires addressing key constraints in core research areas: (1) cell sources, (2) growth media, (3) scaffolding biomaterials and (4) bioreactor design. Here we summarize work in the area of insect cell cultures as a promising avenue to address some of the needs in the field. Properties unique to invertebrate cells from insects allow for convenient and efficient tissue production and have already been exploited for various applications, such as industrial recombinant protein production. Insect muscle has also been employed in the field of tissue engineering for bioactuator applications. Compared to mammalian or avian cultures, invertebrate cell cultures require fewer resources and are more resilient to changes in environmental conditions, as they can thrive in a wide range of temperature, pH and osmolarity conditions. Alterations necessary for large-scale production are relatively simple to achieve with insect cells, including immortalization, serum-free media adaptation and suspension culture. Additional benefits include ease of transfection, nutrient density, and relevance to seafood organisms. To advance insect-based tissue engineering for food purposes, it is necessary to develop methods to regulate the differentiation of insect cells into relevant cell types, characterize cell interactions with biomaterials with an eye towards 3D culture, design supportive bioreactor systems and quantify nutritional profiles of cultured biomass.

Harnessing the knowledge of protein secretion for enhanced protein production in filamentous fungi.

Filamentous fungi are important microorganisms used in industrial production of proteins and enzymes. Among these organisms, Trichoderma reesei, Aspergilli, and more recently Myceliophthora thermophile are the most widely used and promising ones which have powerful protein secretion capability. In recent years, there have been tremendous achievements in understanding the molecular mechanisms of the secretory pathways in filamentous fungi. The acquired pieces of knowledge can be harnessed to enhance protein production in filamentous fungi with assistance of state-of-the-art genetic engineering techniques.

A novel method for removing contaminant Hsp70 molecular chaperones from recombinant proteins.

The production of recombinant proteins in bacteria has increased significantly in recent years, becoming a common tool for both research and the industrial production of proteins. One of the requirements of this methodology is to obtain the desired protein without contaminants. However, this goal cannot always be readily achieved. Multiple strategies have been developed to improve the quality of the desired protein product. Nevertheless, contamination with molecular chaperones is one of the recalcitrant problems that still affects the quality of the obtained proteins. The ability of chaperones to bind to unfolded proteins or to regions where the polypeptide chain is exposed make the removal of the contamination during purification challenging to achieve. This work aimed to develop a strategy to remove contaminating DnaK, one of the homologous Hsp70 molecular chaperones found in Escherichia coli, from purified recombinant proteins. For this purpose, we developed a methodology that captures the DnaK from the contaminating proteins by co-incubation with a GST-cleanser protein that has free functional binding sites for the chaperone. The cleanser protein can then be easily removed together with the captured DnaK. Here, we demonstrated the utility of our system by decontaminating a Histidine-tagged recombinant protein in a batch process. The addition of the GST-cleanser protein in the presence of ATP-Mg eliminates the DnaK contamination substantially. Thus, our decontaminant strategy results versatile and straightforward and can be applied to proteins obtained with different expression and purifications systems as well as to small samples or large volume preparations.

Basal transcription profiles of the rhamnose-inducible promoter PLRA3 and the development of efficient PLRA3-based systems for markerless gene deletion and a mutant library in Pichia pastoris.

An ideal inducible promoter presents inducibility with an inducer and no basal transcription without inducer. Previous studies have shown that PLRA3 in Pichia pastoris is a strong rhamnose-inducible promoter for driving the industrial production of recombinant proteins. However, another important profile of PLRA3, the basal transcription, was not investigated yet. In this study, the basal transcription of PLRA3 was assessed according to the profiles of two test strains grown in media lacking rhamnose: (1) the production of secretory β-galactosidase in P. pastoris GS115/PLRA3-LacB, in which lacB expression was regulated by PLRA3, and (2) growth in P. pastoris GS115/PLRA3-MazF, in which the expression of mazF, which encodes an intracellular toxic protein, was controlled by PLRA3. Analyses revealed low β-galactosidase production and non-obviously inhibited growth of the test strains, which suggests that there was a low basal transcription level of PLRA3 when rhamnose was absent. Thus, PLRA3 was an excellent candidate for genetic manipulation in P. pastoris due to its strict regulation, a strong and a low transcriptional activity with and without rhamnose, respectively. Subsequently, two systems were developed based on PLRA3 in P. pastoris: (1) an efficient markerless gene deletion system for single or multiple genes and (2) a high efficient piggyBac transposase-mediated mutation system for investigating the functions of unknown genes, as well as for the screening of expected mutants.