The choice of a material and the engineering design that is intended to lead to a beam exit window capable of sustaining mechanical and thermal loads in a high-radiation environment, while minimizing the beam loss and maximizing the window lifetime is discussed. Thin titanium windows have been typically used in industrial accelerators in the tens of kW beam power [1].The focus of this research is to conduct fundamental studies related to the choice of a material, from a material science point of view, for MW-class beam exit windows and an engineering design, including parameters such as the window size, thickness, and cooling scheme, suitable for industrial accelerators. CrMnV and CrMnTiV HEAs were selected for this study. According to Yang et al., [2], 1.1 and 6.6% should be expected as the criteria for forming high entropy stabilized solid solution phases. The two parameters of the CrMnV and CrMnTiV alloys are and respectively. Therefore, the two alloys are expected to be solid solution.The mechanical properties of CrMnV and CrMnTiV solid solution HEAs exit window prior to E-beam irradiation were measured using nanoindentation. The nanoindentation testing was carried out using XP Nanoindenter tester equipped with a three-sided diamond Berkovich indenter tip with maximum displacement of 2000 nm. The hardness is measured as 5.2 and 6.1 GPa for the bulk CrMnV and CrMnTiV solid solution HEAs at a depth of indentation of 900 nm respectively, Fig. 1. We also observe that both solid solution CrMnV and CrMnTiV HEAs depict indentation size effect. References Chmielewski A.G., Zimek, Z., Panta P., Drabik W., Radiat. Phys. Chem. 45 1029 (1995). Yang, X. and Y. Zhang, Prediction of high-entropy stabilized solid-solution in multi-component alloys. Materials Chemistry and Physics, 2012. 132(2-3): p. 233-238. Figure 1