Increase In Erosion Rate Research Articles

Using radiotracers 137Cs and 210Pbex to document climate change in mountain areas through the estimate of soil erosion rates

Abstract. During the last few decades, a general increase in heavy rainfall events has been documented in many areas of the world. These events have caused changes in soil erosion rates and strongly affected the human activities in mountain areas by reducing the national income obtained from cultivated land. In this context, the use of fallout radiotracers can be an important tool for better understanding the consequences of climate change in these areas and proposing effective countermeasures in order to reduce soil loss. In this contribution, plot experiments carried out in southern Italy that involve the use of 137Cs and 210Pbex measurements were performed to estimate soil erosion rates during the last few decades. The overall results indicate an increase in soil erosion rates during the last 15–20 years and suggest the use of this technique to detect climate change in mountain areas.

Climate resiliency of a tailings management facility: case study of Mont-Wright mine

ABSTRACT This study investigates the climate resiliency of the Mont-Wright mine tailings management facility (TMF) in Quebec, Canada, with a focus on tailings erosion and flooding. Ultra-high resolution (1 km) climate simulations of the global environmental multiscale (GEM) model, spanning the current (2001–2020) and future (2041–2060) periods, form the basis of this study. Comparison of GEM model outputs against gridded observation data suggests reasonable performance of the model in simulating TMF-relevant climate variables, giving confidence in the model. The analysis indicates potential increases in tailings erosion rates of up to 6% (0.01 g/m2s) for the future period due to elevated wind-induced shear stress. Floods, represented in terms of probable maximum flood, reveal future increases in magnitudes of up to 20% in summer/fall for durations of 12–72 h. Increases of up to 17% are projected for spring for the 72-h duration, with decreases noted for other durations due to precipitation efficiency reductions. The projected small increases in erosion rates, in absolute terms, are not deemed to be of any major concern. As for projected increases in flooding, Mont-Wright mine’s climate-change adaptation strategy, which is aligned with existing Quebec guidelines, seems reasonable to mitigate flooding impacts.

Lithium isotopes track changes in continental weathering regimes across the end-Permian mass extinction in Southwest China

It has been assumed there was a massive amount of volcanic CO2 injection into the Permian-Triassic atmosphere and ocean systems, leading to rapid climatic warming and expansion of marine anoxia. However, it remains intriguing how Earth recovered from such a CO2-driven hyperthermal condition. One potential mechanism involves the negative feedback between continental silicate weathering and atmospheric CO2, which could have helped maintain habitability across the end-Permian mass extinction (EPME) interval. This process can be examined using lithium isotopes (δ7Li), which reflect the balance of physical erosion and chemical weathering, and chemical weathering indices such as the Chemical Index of Alteration (CIA), which indicates the chemical alteration of parent materials during weathering. In this study, we analyze siliciclastic sedimentary rocks from the Lopingian to Lower Triassic depositional sequences in the HK-1 drill core at the Lengqinggou section, a terrestrial coastal depositional environment in Southwest China, to reconstruct changes in continental chemical weathering intensity across the EPME. We observed a significant ∼4 ‰ positive shift in δ7Li, accompanied by a marked decrease in Li content from 26 ppm to 6 ppm. Our corrected CIA data (CIAcorr) also exhibits a considerable decrease from 94 to 59 across the EPME. The new δ7Li and CIAcorr data from the terrestrial section indicate a decrease in overall chemical weathering intensity in Southwest China, alongside an increase in physical erosion rates, suggesting a shift from a transport-limited to a kinetically limited weathering regime across the EPME. These changes in the continental weathering regime appear to be linked to active volcanic activity near the South China Block, which led to massive deforestation and the collapse of soil systems. Dramatic reductions in chemical weathering intensity may result in inefficient atmospheric CO2 consumption through silicate weathering if other climatic and tectonic conditions remain constant, potentially contribute to maintaining high global surface temperatures and prolonged marine anoxia into the Early Triassic.

A 3D SPH framework for simulating landslide dam breaches by coupling erosion and side slope failure

Depicting the co-occurrence of erosion and side slope failure during landslide dam breaches using numerical models remains a challenge. In this study, a 3D Smoothed Particle Hydrodynamics (SPH) framework is proposed by coupling the erosion and side slope failure processes. Erosion downcutting is depicted by calculating the washed-away materials due to shear forces exerted by overtopping flow, while side slope failure is simulated using the Drucker-Prager model. In the computation domain, the destabilized slope soil particles are identified, then set to deform like fluid, and subsequently mixed with the flow. The proposed model achieves a refined 3D simulation of breach channel morphology evolution. According to the driving factors, the breaching process can be divided into two stages: the erosion-dominated breach deepening stage, and the simultaneous deepening and widening stage driven by both erosion and side slope failure. Dam erodibility affects the rate of breaching, while soil cohesion influences the breach channel evolution. As soil erosion rate increases, peak discharge increases following a power function, while peak timing decreases according to a power function. As soil cohesion increases, side slope failure slows, resulting in steeper slopes and more pronounced “headcut” erosion, which shifts the slope failure mode from sliding to collapsing.

Assessment of urbanization impacts on soil erosion and groundwater recharge in Enugu, Southeastern Nigeria

The study of Land Use and Land Cover (LULC) in Enugu, southeastern Nigeria, is crucial for understanding its effects on erosion and groundwater recharge. Different LULC types, coupled with varying slope gradients and soil types, create a complex interaction that influences soil stability and water infiltration in the region. This research aims to assess the distribution of LULC types, slope gradients, and soil types in Enugu, and to evaluate their impacts on erosion rates and groundwater recharge potential. Data for LULC, slope gradients, and soil types were collected and analyzed to determine their spatial distribution and characteristics. The study employed GIS techniques to map these variables and assess their interactions. Erosion potential and groundwater recharge capacity were evaluated based on the characteristics of the LULC types, slopes, and soils. The analysis revealed that trees cover the largest area (3709.74 km²), playing a significant role in stabilizing the soil and reducing erosion through their extensive root systems and canopy cover. Rangeland (2631.81 km²) also contributes to soil stability, although less effectively than forested areas. Crops (192.40 km²) have mixed impacts on erosion depending on agricultural practices. Built areas (1162.69 km²) present challenges due to impervious surfaces, which increase surface runoff and reduce groundwater recharge. Slope gradients were found to correlate with erosion processes and groundwater dynamics. Gentle slopes (0 - 1.81 degrees) cover 1870.15 km² and facilitate infiltration, enhancing groundwater recharge. Moderate slopes (1.81 - 4.06 degrees), covering 3275.46 km², are more prone to erosion, while steeper slopes (4.06 - 11.73 degrees) covering 2176.54 km² experience accelerated runoff and increased erosion rates. The steepest slopes (11.73 - 44.06 degrees) are the most erosion-prone areas, requiring significant intervention. The soil analysis showed that Dystric Nitosols (4052.80 km²) with the lowest K-factor (0.0178) are least prone to erosion and have high infiltration capacity, making them beneficial for groundwater recharge. Plinthic Acrisols (2732.53 km²) and Ferric Acrisols (102.36 km²) exhibit moderate erosion susceptibility. Dystric Fluvisols (793.92 km²) with the highest K-factor (0.0223) are highly erosion-prone. Gleysols (20.69 km²) have low to moderate erosion susceptibility. The interplay between LULC types, slope gradients, and soil types significantly influences erosion and groundwater recharge in Enugu. The study highlights the need for targeted land management practices, such as afforestation, contour farming, terracing, and the use of cover crops to mitigate erosion and enhance groundwater recharge. This research provides a comprehensive analysis of the relationships between LULC, slope gradients, and soil types in Enugu, offering valuable insights for developing effective land management strategies to address erosion and groundwater recharge challenges.

Assessing the 3D distribution of soil organic carbon by integrating predictions of water and tillage erosion into a digital soil mapping-approach: a case study for silt loam cropland (Belgium)

Although agricultural intensification has generally increased crop yields, it also resulted in a range of environmental issues. These include increased erosion rates and declined soil organic carbon (SOC) stocks. In order to improve our understanding on how erosion impacts the overall SOC storage capacity of croplands, this study analyses the 3D distribution of SOC as a function of water and tillage erosion in a conventionally ploughed field in the Belgian silt loam region. We present a novel methodological framework to integrate the output of an advanced erosion model as a co-variate within a Digital Soil Mapping (DSM) approach with the objective to create detailed SOC maps. More precisely, we combined (i) the Water and Tillage Erosion Model and Sediment Delivery Model (WaTEM/SEDEM), simulating spatial patterns of soil erosion and sediment deposition due to water and tillage erosions, with (ii) a SOC sampling campaign, resulting in a SOC spatial distribution model that considers both types of erosion. The results show that, as compared to plateaus, SOC stocks are nearly half as large along eroding slopes (i.e. convex slope positions affected by tillage erosion and steep slopes affected by water erosion). Yet, they are up to twice as large in areas characterized by sediment deposition (i.e. concave positions due to tillage erosion and foot slope positions due to water erosion). Our results further show that tillage erosion has a significant influence on the SOC stocks in the top 0.7 m and in particular on the top 0.4 m. The influence of water erosion is less strong but mostly significant along the entire depth profile. Overall, this work demonstrates the relevance of considering different erosion processes when aiming to predict spatial patterns of SOC. Considering the top 1 m and a WaTEM/SEDEM application at a resolution of 10 m our 3D SOC modelling approach obtained a coefficient of determination (R2) of 0.62, a relative root mean square error (RRMSE) of 30.5 % and a relative mean absolute error (RMAE) of 26.0 %. While future work may likely lead to further improvements e.g. a more detailed SOC sampling network along the foot slopes and thalwegs in order to obtain a more spatially detailed prediction of the area characterized by depositions due to water erosion, we demonstrate the great potential of existing erosion and deposition models in doing so.

Numerical simulation study on erosion characteristics of desulfurization slurry using shell-and-tube heat exchanger for low-grade waste heat utilization

The wet desulfurization yields slurry with a moderate temperature and stable supply and thus holds promise for waste heat utilization. However, the corrosive nature and solid particle content of desulfurization slurry from the wet desulfurization process pose potential erosion challenges in waste heat utilization heat exchangers, which is an aspect scarcely explored in the existing literature. The present study aimed to investigate the erosion characteristics in desulfurization slurry heat exchangers using numerical simulation approaches, which can offer crucial insights for practical application in low-grade energy recovery. The result identified slurry mass flow rate and composition as essential factors of erosion distribution. Higher mass flow rates enhance heat transfer efficiency. Still, paradoxically, lower flow rates lead to more pronounced erosion, with a slurry mass flow rate of 35 kg/s resulting in nearly double the erosion compared to the benchmark condition of 56 kg/s. This phenomenon is ascribed to lower fluid velocities in the heat tubes, where the influence of changed velocity diminishes, but slurry exhibits more stable flow at higher mass flow rates. Furthermore, it is also observed that both elevated solids content and particle size lead to an increase in erosion rates. The difference in erosion caused by solid particles with particle sizes in the range of 200–350 µm is marginal. The heat exchanger structure and arrangement also impact fluid flow and erosion. While the difference in fluid flow between vertically and horizontally arranged heat exchangers is negligible, the erosion was significantly reduced to 1/10 in the vertical arrangement. The no-tube-in-window heat exchangers, designed to minimize vibration, exhibit reduced heat transfer capacity alongside diminished and more uniform erosion. The augmentation of tube passes reduces overall erosion but focalizes severe erosion at the slurry inlet, which presents a potential design solution.

An assessment of anticipated future changes in water erosion dynamics under climate and land use change scenarios in South Asia

Water erosion has emerged as a significant global environmental challenge, particularly in South Asia, recognized as one of the regions hardest to hit globally by climate change. This study aims to identify the potential erosion hotspots in South Asia and to assess areas under risk in the future due to climate and land use change scenarios. We utilized the Revised Universal Soil Loss Equation (RUSLE), an empirical erosion model, to estimate erosion for both historical and future periods, considering two distinct Shared Socio-economic Pathways (SSP126 and SSP585). The baseline model predicts a mean water erosion rate of 10.6 t. ha−1. year−1 in South Asia, with more than 30 t. ha−1. year−1 recorded for 6.3 % of the total land area. Notably, Bangladesh and Nepal exhibit significantly higher erosion rates than other South Asian countries. Further, our projection indicates an + 10 % increase in erosion rates during the near future (2021–2040) under SSP585 compared to the historical estimates. A substantial rise of approximately + 31 % and + 39 % in water erosion rates in South Asia is anticipated during the far future periods of 2061–2080 and 2081–2100 under SSP585. At the country level, Bangladesh (+42 %), Bhutan (+108 %), and Nepal (+70 %) are expected to experience substantial increases in erosion rates during the 2081–2100 period, with India projecting a + 38 % increase. Additionally, a significant + 35 % expansion in the spatial extent of high erosion areas (>30 t. ha−1. year−1) is foreseen in 2081–2100 under SSP585. Furthermore, under the low climate change scenario (SSP126), the impact on the erosion rates is minimal, while under SSP585, a substantial increase in erosion rates is anticipated. Regions such as Southern India, the arid and semi-arid areas near the India-Pakistan border, and the Himalayan foothills are identified as hotspots for significant changes in erosion rates. Acknowledging a certain level of uncertainty, our study provides valuable insights into erosion risk areas in South Asia and their plausible future impacts due to climate and land use changes. This information can assist policymakers in South Asian countries in developing national-level strategies for soil conservation and climate resilience.

Assessing the progress of internal instability of fill dam material in South Korea through long-term seepage tests

Several studies investigating the internal instability of well-graded soils have suggested that well-graded soils show characteristics and developments different from those of gap-graded soils. Moreover, the cause and progression of long-term internal instability in well-graded soils have not yet been established. This study aimed to address this knowledge gap by conducting long-term seepage tests to analyze the progress and cause of the internal instability of well-graded soils generally utilized in fill dams in South Korea. The test results revealed that well-graded soils in internally stable conditions exhibited clogging due to fine particles, reducing overall permeability. A similar phenomenon was identified under internally unstable conditions. The subsequent unclogging process resulted in a rapid increase in permeability and erosion rate with the collapse of the soil structure. Consequently, the internal instabilities of well-graded soils progress through suffosion. Based on the test results, the mechanism of internal instability and its progression in well-graded soils were proposed.

Investigation of the mechanical, thermal and wear properties of eggshell/PLA composites

Abstract The current study investigated the potential application of agricultural waste chicken eggshell (CES) as a reinforcement in composites made of poly (lactic acid) (PLA). With the use of twin extruder and injection molding machine, polymer composites have been developed. The performance of the composites was assessed with respect to its mechanical, thermal, and wear properties. It was shown that the increase in eggshell content led to the increase in void content and water absorption. Despite the increase in void content, the mechanical properties, in particular, micro-hardness, tensile strength and flexural strength were significantly improved. Conversely, when the eggshell content increased from 0 to 30 wt%, the impact strength was decreased. A slight decrease in fracture toughness was observed. Thermal properties, such as thermal stability and thermal degradation temperature, were improved with an increase in eggshell content. PLA, PLA-CES-10, PLA-CES-20, and PLA-CES-30 composites exhibited increase in erosion rate by 13.8 %, 10 %, 9 %, and 6 %, respectively, when the impact velocity was increased from 30 m/s to 50 m/s. Data were analyzed statistically with one-way ANOVA and post hoc Tukey’s HSD test (α < 0.05). Overall, PLA/eggshell based polymer composites performed exceptionally well, in addition to their environmental benefits, pollution control, waste utilization, and reduced production cost.

Assessing basin-wide soil erosion in the Citarum watershed using USLE method

Citarum is the largest watershed in West Java, which is home to 25 million people. In such a large and populated watershed, land conversion is an inevitability. This condition directly encouraged an increase in erosion rates, which impacted increasing sedimentation rates in rivers, lakes, and dams. This research aimed to assess the spatial characteristics of soil erosion in the Citarum Watershed using the USLE method. The results showed that 45 % of the land in the Citarum watershed was in class I erosion hazard with an erosion rate of ≤15 tons/ha/year, 18 % in class II (15–60 tons/ha/year), 26 % in class III (60–180 tons/ha/year), 5 % in class IV (180–480 tons/ha/year), and the remaining 6 % in class V (>480 tons/ha/year). Total annual erosion in the Citarum watershed reaches 80.1 million tons, of which 52 % is contributed by the Middle Citarum Watershed (42.0 million tons/year), 26 % is the Upper Citarum Watershed (21.2 million tons/year), and the remaining 22 % contributed by the Lower Citarum Watershed (17.0 million tons/year). The proposed control measures for erosion hotspot locations throughout the watershed, which include structural and nonstructural approaches, are also proposed.

Experimental analysis and model prediction of elbow pipe's erosion in water-cooled radiator

The radiator with heat transfer capability is able to guarantee the stable operation of hydro generator set, while the long-term and continuous scouring on radiator pipes by cooling medium will lead to thinning or even perforation of pipe wall, which triggers wall failure. This paper analyzes and predicts the failure mechanism of radiator’s pipe wall, and investigates the effects of water flow velocity, sand content and sand particle size on erosion damage of radiator pipe by establishing a test bench for pipe erosion. The results show that the increase of above parameters will lead to the increasing erosion rate, especially when the sand content is 1%, the velocity is 8 m/s and the sand particle size is 0.85 mm, the erosion damage will be particularly serious. Based on experimental data, BP and LSSVM models are employed to predict the pipe wall failure, and PSO algorithm is used to optimize the two models. The optimized PSO-BP has the highest accuracy with the mean absolute error (MAE) of 0.2070 and the mean absolute percentage error (MAPE) of 4.702%. The findings provide a reference for wall failure analysis of radiator, which is of great significance for unit's safe operation.

Assessing erosion and sediment removal in the Isla Salamanca coastal barrier: implications for the Barranquilla-Ciénaga highway and coastal marine biodiversity – Colombia

The Isla Salamanca coastal barrier on the Colombian Caribbean coast faces significant erosion, driven by climate change-induced, sea level rise and human activities such as highway construction. The Barranquilla-Ciénaga highway, particularly at kilometers 19 and 29, is at risk, with severe consequences for the region’s socio-economic and environmental well-being. Human interventions like the highway construction and seawall installations have disrupted the natural coastal dynamics, leading to increased erosion rates. The study, conducted between 2004 and 2021, reveals that the Isla Salamanca coastal barrier is experiencing substantial transgression, with erosion rates peaking at -16.1 m·yr− 1. The highway protection measures, with seawall construction, have proven inadequate, exacerbating erosion downstream. The mangrove loss due to hydrological changes and increased salinity is further threatening the fragile ecosystem. The research emphasizes the importance of considering biodiversity loss in the context of rapid erosion rates. The region, declared a Ramsar Site and Biosphere Reserve, hosts vital ecosystems like mangroves and dunes, whose destruction negatively impacts marine biodiversity. The study suggests the relocation of the highway, acknowledging the challenges of preserving wetlands and mangroves in the process. Balancing the need for infrastructure with ecological preservation is essential, and the study proposes comprehensive solutions, including shoreline management, ecosystem-based protection, and community involvement. The goal is to mitigate erosion’s adverse effects on biodiversity, habitat integrity, and the overall health of this ecologically sensitive region.

Use of a biocompatible polymer to enhance tailings transportation and reduce water consumption at a coper-cobalt-zinc plant

Excess water can lead to instability and even failure in tailings storage facilities (TSFs). Simply reducing the amount of water in TSFs could be the best way to ensure the safety of nearby communities. In this case study we investigated the effects of reducing the water content in tailings slurry at a copper-cobalt-zinc mine in Mexico. An environmentally friendly polymer was used as a drag reduction agent (DRA) to offset the increase in solids percentage. The potential effects of the increased solids concentration on the tailings transportation system were also assessed. A series of 'what if' studies was conducted to assess whether adding the polymer would allow the solids concentration to be increased without changing the pressure loss in the tailings pipeline. The studies entailed conducting pipe loop tests to investigate these changes under various solids/ polymer concentrations and then constructing a computational fluid dynamics (CFD) simulation model using the test results. The validated model was used to determine the optimal polymer percentages needed to maintain the same pressure loss under baseline (30% solids) conditions, and to assess the potential risks (clogging, increased erosion rates) to the pipelines. The potential water savings were found to be significant, varying from about 1.852 Mm3/a at 35% solids to 3.915 Mm3/a at 45% solids.

Numerical simulation of water-slag elbow erosion-inhibiting by regulating the slag injection position with a novel preceding rotating sheet structure

The elbow erosion seriously jeopardizes the safe and stable operation of water–slag discharge pipeline of the coal gasification system. This work simulated water–slag elbow characteristics with various slag injection positions by simulating five simplified and representative erosion categories, including A-type horizontal-vertical elbow with an upstream flow, B-type horizontal-vertical elbow with a downstream flow, C-type vertical-horizontal elbow with an upstream flow, D-type vertical-horizontal elbow with a downstream flow and E-type horizontal-horizontal elbow. Compared with the C/D-type elbow, where particles were injected uniformly, the A-type elbow and E-type elbow were found to increase erosion rate, while the B-type elbow decreases erosion rate. An interesting discovery is that the elbow erosion rate is relatively low for small particles when particles are injected from the middle and bottom positions of the inlet section of the elbow. Based on the observation, a novel preceding rotating sheet structure was developed to regulate the particle injection position. It shows an excellent anti-erosion performance by reducing the maximum erosion rate of particles with diameters of 50, 100, and 200 μm by 23%, 35%, and 43%, respectively.

Tourism impact on coastal erosion: a case of Alanya

Sandy coasts are constantly exposed to rapid coastal change. Projected climate change caused by Changes in sea level rise, wave circumstances, and storm occurrences will increase erosion rates, exposing these areas to increasingly hazardous conditions. For coastal management purposes, it is important to monitor and measure these changes. Erosion of sandy and pebbly beaches and their ecosystems. The loss of sand and gravel is not only due to the rise in sea level and the force of waves resulting from storms, which will intensify due to climate change. There is a new important factor of human intervention and impact on the beaches that must be mentioned and verified as to how the effect is in the long term with the increase in tourism in the coastal areas, especially in areas of a tourist nature. The amount of sediment that each individual transports from the coastal beaches in the Alanya region.
 In the experiment, we Collected samples of sand and gravel from different locations on the coast to be surveyed. Classifying the collected samples by means of sieve analysis. Executing the project by going to the sites of sand samples that were analyzed in different periods by collecting samples (collecting sand attached to the bodies of people of different sizes in basins Testing). The thesis also answers Identify the eroded beach by relating the average number of locals and foreigners who come to the project area for a year and use the coast with the data collected during the project.

Assessing post-fire water quality changes in reservoirs: Insights from a large dataset in Portugal

Wildfires in the Mediterranean basin, especially in Portugal, have increased in extent and frequency over the last few years. One of the impacts of wildfires on humans and ecosystems is on the water quality of surface waters. Ashes and increased erosion rates might, for example, change oxygen levels and elevate the influx of sediments, nutrients, or other water quality-related components like metals and polycyclic aromatic hydrocarbons (PAHs), possibly affecting water supply. In this study, time series of eight water quality parameters: biological- and chemical oxygen demand (BOD and COD), electrical conductivity (EC), total phosphorous (TP), nitrate (NO3−), total suspended sediments (TSS), dissolved oxygen (DO), and pH, were assessed via changepoint analysis to identify events of post-fire water contamination in over 60 Portuguese reservoirs. Further, possible fire, watershed, reservoir, and climate-related drivers were linked with the occurrence of these contamination events through logistic regression using generalized additive models. All measured parameters exhibited post-fire changes, with some being more frequently affected than others. The concentrations of TP, NO3−, and TSS showed a noticeable increase following 9.6 %, 12.6 %, and 13.6 % of all wildfires, respectively. Most changes fell into the unusually large fire seasons of 2003–2005 and 2017. The most significant impacts could be seen in southern reservoirs after the fire seasons of 2003–2005. The burned area ratio of the watershed was identified as the main driver of post-fire water contamination, while reservoir and climate-related characteristics like water levels also played a significant role in some parameters. Increased levels of suspended sediments were identified as a potential threat to water supply, especially when large wildfires coincide with drought-induced low reservoir water levels. The identification of post-fire water contamination events and their drivers from large datasets can inform water managers about potential threats to water supply.

Long‐Term Landscape Evolution in Response to Climate Change, Ecosystem Dynamics, and Fire in a Basaltic Catchment on the Colorado Plateau

AbstractPredicting responses of semi‐arid to montane landscapes in southwestern North America to ongoing anthropogenic changes requires understanding of past interplay among geomorphic, ecologic, and climatic factors. This study utilizes modern weathering and sediment transport processes to inform the interpretation of a 250‐kyr lacustrine sediment record of paleoecology, hydrology, and erosion from a small, closed basin, basaltic catchment on the southwestern edge of the Colorado Plateau. Geochemical and mineralogical analyses of bedrock, colluvium, and lake sediments indicate that clastic sediments in the basin are a mixture of local physical weathering products (albite and ilmenite) and eolian dust (quartz, illite, and zircon). Dust fractions increase during glacial periods coincident with lower overall sedimentation rates, suggesting this pattern results from decreased local erosion rates and not increased dust deposition. Titanium counts from X‐ray fluorescence core scanning, a proxy for ilmenite content, traces past local erosion rates. The highest erosion rates, inferred from the highest Ti counts, follow climatic transitions toward interglacial conditions (Marine Isotope Stage 5e, 3a, and the Holocene), periods characterized by vegetation changeover (observed in the core's palynology), higher temperatures (piñon‐juniper‐oak pollen abundance), lower effective precipitation (shallow lake facies), and increased wildfire activity (microscopic charcoal particle counts and sizes). While brief inferred episodes of erosion occur following abrupt transitions to cooler and wetter conditions, indicated by the abundance of subalpine tree (spruce and fir) pollen and deeper lake facies, landscapes appear more stable during glacial periods. This long‐term perspective suggests that aridification and resulting vegetation succession and increased wildfires will increase erosion rates in similar settings regionwide.

Quantifying the riverbank erosion and accretion rate using DSAS model study from the lower Ganga River, India

Assessing the erosion and accretion (EA) rate of the lower Ganga River in India is crucial for scientific planning and implementing development activities in river basin management. The current study utilized the digital shoreline analysis system (DSAS model) to measure the erosion and accretion rate from 1972 to 2022. The objective was to quantify the spatiotemporal variation of erosion vulnerability and project future trends at the village level to support different developmental programs. Satellite images and field survey data were employed to analyze the EA rates. The results indicated a significantly higher average erosion rate of 0.0583 ​km/year on the left banks compared to the right bank in the study area. The net shoreline movement (NSM) analysis demonstrated that erosion on the left bank occurred at an average distance of approximately 2.91 ​km, which was twice as high as the erosion on the right bank. Furthermore, the findings suggested a consistent trend of increasing erosion rates that are projected to continue until 2042. It is noteworthy that the study identified a majority of highly erosional villages (92.86% of the villages) located on the left bank of the river, particularly upstream from the Farakka barrage. The DSAS model underwent validation using RMSE, T-test, ROC, and R2 techniques, confirming its acceptance with satisfactory results. In summary, this research introduces a new technique and framework for accurately measuring EA rates and making future predictions for management projects.

Analysis of hydro-abrasive erosion in a high-head Pelton turbine injector using a Eulerian-Lagrangian approach

High-head hydropower plants deploy Pelton turbines to harness energy; however, turbine components face severe abrasive erosion due to suspended sediments. The erosion of the Pelton injector leads to the degradation of the jet quality, reducing the turbine efficiency considerably. Recently, the erosion of an internal servomotor design of the injector has been studied numerically; however, the cavitation-erosion synergy was not explored. This study serves as the extension of the literature with an analysis of the hydro-abrasive erosion and inception of cavitation in an injector with an external servomotor of a high-head hydropower plant (HPP). A Eulerian-Lagrangian approach is used to study the effects of sediment properties and flow parameters on hydro-abrasive erosion; whereas, the Schnerr-Sauer model is used to analyze the inception of cavitation. Interestingly, an increase in particle size from 40 microns to 200 microns resulted in a 95.7% reduction in needle erosion; but, led to a two-fold increase in nozzle erosion. For an increase in the plant head from 200 m to 820 m, the increase in erosion rate of the nozzle and the needle is 4.36 and 1.4 times, respectively. Moreover, the possibility of cavitation in the Pelton injector also increases with an increase in the head of the HPP leading the injector to higher susceptibility to the synergic effect of cavitation and hydro-abrasive erosion. This study attempts to assist the hydropower development in high-head regions with a risk of high sediment flow and manage the existing plants efficiently.