Increased Greenhouse Gas Emissions Research Articles

A Warmer and Wetter World Would Aggravate GHG Emissions Intensity in China's Cropland

AbstractMany agricultural regions in China are likely to become appreciably wetter or drier as the global climate warming increases. However, the impact of these climate change patterns on the intensity of soil greenhouse gas (GHG) emissions (GHGI, GHG emissions per unit of crop yield) has not yet been rigorously assessed. By integrating an improved agricultural ecosystem model and a meta‐analysis of multiple field studies, we found that climate change is expected to cause a 20.0% crop yield loss, while stimulating soil GHG emissions by 12.2% between 2061 and 2090 in China's agricultural regions. A wetter‐warmer (WW) climate would adversely impact crop yield on an equal basis and lead to a 1.8‐fold‐ increase in GHG emissions relative to those in a drier‐warmer (DW) climate. Without water limitation/excess, extreme heat (an increase of more than 1.5°C in average temperature) during the growing season would amplify 15.7% more yield while simultaneously elevating GHG emissions by 42.5% compared to an increase of below 1.5°C. However, when coupled with extreme drought, it would aggravate crop yield loss by 61.8% without reducing the corresponding GHG emissions. Furthermore, the emission intensity in an extreme WW climate would increase by 22.6% compared to an extreme DW climate. Under this intense WW climate, the use of nitrogen fertilizer would lead to a 37.9% increase in soil GHG emissions without necessarily gaining a corresponding yield advantage compared to a DW climate. These findings suggest that the threat of a wetter‐warmer world to efforts to reduce GHG emissions intensity may be as great as or even greater than that of a drier‐warmer world.

Carbon footprint of hospital laundry: a life-cycle assessment

ObjectivesTo assess greenhouse gas (GHG) emissions from a regional hospital laundry unit, and model ways in which these can be reduced.DesignA cradle to grave process-based attributional life-cycle assessment.SettingA large hospital...

Do mandatory environmental policies really work? A case study of California's mandatory commercial recycling law

Increased volumes of solid waste disposal continue to take their toll on US landfills which potentially have very dire consequences, especially regarding increased greenhouse gas emissions from methane and carbon dioxide. The objective of this research is to find out if mandatory recycling policies, such as the one implemented by California in 2012, have a significant reductive effect on landfill waste disposal.Using county-level panel data from 2001 to 2018, a two-way fixed effect difference-in-difference estimator is implemented to tease out the effect of this policy on California landfills using the state of Washington as a counterfactual. Results show that this policy led to 0.082 ton-reduction in landfill waste per capita per year which amounts to 9% reduction in the total volume of landfilled waste. Several robustness checks were carried out to ensure the reliability and stability of our findings. Thus, if cost effective, mandatory commercial recycling policies can be added to other waste reduction policies such as voluntary recycling and stimulation of the waste export market to attain maximum waste reduction benefits.

Reducing meat consumption in Central Asia through 3D printing of plant-based protein-enhanced alternatives-a mini review.

3D food printing (3DFP) is emerging as a vital innovation in the food industry's pursuit of sustainability. 3DFP has evolved to significantly impact food production, offering the capability to create customized, nutritionally balanced foods. Central Asia has a higher than global average level of meat consumption per capita, which might be influenced by its historical and cultural background of nomadism. This dietary trend might potentially result in negative impacts on both the environment and human health outcomes, as it leads to increased greenhouse gas emissions and increased risk of chronic diseases. Reducing meat consumption holds the potential to address these sustainability and health issues. A possible strategy to reduce meat consumption and promote plant-based foods is 3D Food Printing (3DFP), which can rely on plant-protein sources from the region to create appealing and tasty alternatives for these populations. This review summarizes recent studies on plant protein-rich materials for 3DFP as a substitute to meet the growing global demand for meat as well as the 3DFP printing parameters associated with the different plant-based proteins currently used (e.g., lentils, soybeans, peas, and buckwheat). The findings revealed that buckwheat, a dietary staple in Central Asia, can be a promising choice for 3DFP technology due to its widespread consumption in the region, gluten-free nature, and highly nutritious profile.

Impacts of Liquid Fractions from Two Solid–Liquid Separation Technologies on the Soil Porosity, Ammonia, and Greenhouse Gas Emissions

Application of organic manure on farmland is one of the most important tasks in agricultural recycling. However, few studies have investigated the potential impact of different solid–liquid separation (SLS) technologies on soil porosity and greenhouse gas (GHG) emissions as a result of the application of liquid fractions (LFs). A microcosm experiment was conducted to track the emissions of ammonia (NH3), nitrous oxide (N2O), carbon dioxide (CO2), and methane (CH4) from soils (1) without liquid manure application (CK), (2) with a raw dairy slurry (RM), (3) with the liquid fractions of mechanical solid–liquid separation (MS) technologies, and (4) with the LF of an enhanced solid–liquid separation technology including a flocculant (tannic acid, Ta) (MS + Ta). Soil porosities of different treatments were measured using computed tomography (CT). The saturated water conductivities of the RM and MS treatments were 53.38% and 78.63%, respectively, lower than that of the CK. The application of raw slurry and LFs reduced the gas diffusion due to the strong decrease in pore sizes >500 μm and increased gas emissions compared to the CK. Compared with RM, MS had greater N2O and lower CH4 emissions, whereas MS + Ta had lower NH3 and N2O emissions. MS had the greatest CO2-e emissions, mainly owing to high N2O emissions, followed by RM and MS + Ta. The implementation of a simple SLS led to an increase in nitrogen (N) loss and GHG emissions when the resultant LFs were applied to farmlands, whereas high emissions were reduced when a simple SLS was combined with a flocculant, such as Ta. Further research is required to elucidate the reduction mechanism and its effectiveness under field conditions.

Assessing Future Precipitation Patterns, Extremes and Variability in Major Nile Basin Cities: An Ensemble Approach with CORDEX CORE Regional Climate Models

Understanding long-term variations in precipitation is crucial for identifying the effects of climate change and addressing hydrological and water management issues. This study examined the trends of the mean and four extreme precipitation indices, which are the max 1-day precipitation amount, the max 5-day precipitation amount, the consecutive wet days, and the consecutive dry days, for historical observations (1971–2000) and two future periods (2041–2060/2081–2100) under RCP2.6 and RCP8.5 emission scenarios over the Nile River Basin (NRB) at 11 major stations. Firstly, the empirical quantile mapping procedure significantly improved the performance of all RCMs, particularly those with lower performance, decreasing inter-model variability and enhanced seasonal precipitation variability. The Mann–Kendall test was used to detect the trends in climate extreme indices. This study reveals that precipitation changes vary across stations, scenarios, and time periods. Addis Ababa and Kigali anticipated a significant increase in precipitation across all periods and scenarios, ranging between 8–15% and 13–27%, respectively, while Cairo and Kinshasa exhibited a significant decrease in precipitation at around 90% and 38%, respectively. Wet (dry) spells were expected to significantly decrease (increase) over most parts of the NRB, especially during the second period (2081–2100). Thereby, the increase (decrease) in dry (wet) spells could have a direct impact on water resource availability in the NRB. This study also highlights that increased greenhouse gas emissions have a greater impact on precipitation patterns. This study’s findings might be useful to decision makers as they create NRB-wide mitigation and adaptation strategies to deal with the effects of climate change.

ECHO: Engaging citizens in soil health and science

ECHO: Engaging citizens in soil health and science Here, we learn about the ECHO project, coordinated by Soil Scientist Prof Tanja Mimmo of the Free University of Bozen-Bolzano, Italy. While often overlooked, soil is the cornerstone of life on Earth. Soil plays a crucial role in regulating our planet’s health and provides multiple benefits to society. However, this essential resource is under a range of threats, including a changing climate, erosion, and a loss of fertility with consequences that include reduced crop yields, increased greenhouse gas emissions, plus biodiversity loss. In response to this challenge, ECHO, funded by the European Union and UK Research and Innovation (UKRI), has embarked on a mission to revolutionise soil health and secure a more sustainable future.

Degradation increases peat greenhouse gas emissions in undrained tropical peat swamp forests

AbstractTropical peat swamp degradation can modify net peat greenhouse gas (GHG) emissions even without drainage. However, current Intergovernmental Panel on Climate Change (IPCC) guidelines do not provide default emission factors (EF) for anthropogenically-degraded undrained organic soils. We reviewed published field measurements of peat GHG fluxes in undrained undegraded and degraded peat swamp forests in Southeast Asia (SEA) and Latin America and the Caribbean (LAC). Degradation without drainage shifted the peat from a net CO2 sink to a source in both SEA (− 2.9 ± 1.8 to 4.1 ± 2.0 Mg CO2–C ha−1 yr−1) and LAC (− 4.3 ± 1.8 to 1.4 ± 2.2 Mg CO2–C ha−1 yr−1). It raised peat CH4 emissions (kg C ha−1 yr−1) in SEA (22.1 ± 13.6 to 32.7 ± 7.8) but decreased them in LAC (218.3 ± 54.2 to 165.0 ± 4.5). Degradation increased peat N2O emissions (kg N ha−1 yr−1) in SEA forests (0.9 ± 0.5 to 4.8 ± 2.3) (limited N2O data). It shifted peat from a net GHG sink to a source in SEA (− 7.9 ± 6.9 to 20.7 ± 7.4 Mg CO2-equivalent ha−1 yr−1) and increased peat GHG emissions in LAC (9.8 ± 9.0 to 24.3 ± 8.2 Mg CO2-equivalent ha−1 yr−1). The large observed increase in net peat GHG emissions in undrained degraded forests compared to undegraded conditions calls for their inclusion as a new class in the IPCC guidelines. As current default IPCC EF for tropical organic soils are based only on data collected in SEA ombrotrophic peatlands, expanded geographic representation and refinement of peat GHG EF by nutrient status are also needed.

Impact of short-term wind forecast accuracy on the performance of decarbonising wholesale electricity markets

As the proportion of variable renewable generation capacity in our electricity systems rises, so too will the associated absolute forecast errors in their generation. This work quantifies the complex interactions between short-term renewable generation forecasts, short-term demand forecasts, generator unit commitment and economic dispatch in electricity systems with levels of variable renewable generation spanning 49–79% of annual electricity demand. When the short-term operational uncertainty caused by renewable generation becomes larger in absolute terms than that of demand, the accuracy of renewable generation forecasting has a critical influence on electricity market performance. That is, inaccurate short-term wind forecasts can increase hours of unserved energy and scarcity hours spent at market price cap, increase total system costs and prices, significantly increase returns to thermal generators and energy storage, reduce returns to wind generators, and increase greenhouse gas emissions slightly. For the generalised case study considered in this work, the value of improved short term wind generation forecasts looks to becomes significant once variable renewables generate more than roughly 60% of annual electricity demand. Reductions in average market prices of 5 $/MWh or more then appear plausible as acceptable levels of reliability are recovered. As such, improvements in short-term renewable generation forecasting are likely required in order to justify continued investment in variable renewables as the major means of achieving decarbonisation efficiently and reliably, and these could be achieved by any combination of improved forecasting, dispatch control or on-site firming.

Fertilizer Logistics in Brazil: Application of a Mixed-Integer Programming Mathematical Model for Optimal Mixer Locations

Background: Brazil is one of the largest consumers of fertilizers and is highly dependent on the international market to meet its demand for agricultural production inputs. The complexity of the fertilizer supply chain motivated us to carry out this study on redesigning the fertilizer logistics chain and evaluate strategies for reducing logistics costs by redesigning the fertilizer mixing network in Brazil, a country that is heavily dependent on imported fertilizers for agriculture. Methods: We introduce a multi-product mixed-integer linear programming optimization model encompassing the logistics network, from import ports to mixing factories and agricultural fertilizer supply centers. This model includes logistics infrastructure and taxes, accounting for greenhouse gas emissions (specifically carbon dioxide) in fertilizer logistics. Results: The results indicate that expanding the port capacity for fertilizer importation can significantly reduce logistics costs and greenhouse gas emissions by up to 22.5%, decreasing by 23.9% compared to the baseline. We also observed that removing taxes on fertilizer importation can reduce logistics costs by approximately 11%, but it increases greenhouse gas emissions by 2.25% due to increased reliance on road transport. We identified 15 highly resilient regions for establishing mixing factories, evaluated various scenarios and determined the importance of these locations in optimizing the fertilizer supply network in the country. Moreover, the results suggest a significant potential to enhance the role of Brazil’s Northern Arc region in fertilizer import flows. Conclusions: Public policies and private initiatives could be directed toward encouraging the establishment of mixing factories in the identified regions and increasing transport capacity in the Northern Arc region. Improving the logistical conditions of the fertilizer network would contribute to food security by reducing the costs of essential inputs in food production and promoting sustainability by reducing greenhouse gas emissions.

Comprehensive analysis of bioplastics: life cycle assessment, waste management, biodiversity impact, and sustainable mitigation strategies.

Bioplastics are emerging as a promising alternative to traditional plastics, driven by the need for more sustainable options. This review article offers an in-depth analysis of the entire life cycle of bioplastics, from raw material cultivation to manufacturing and disposal, with a focus on environmental impacts at each stage. It emphasizes the significance of adopting sustainable agricultural practices and selecting appropriate feedstock to improve environmental outcomes. The review highlights the detrimental effects of unsustainable farming methods, such as pesticide use and deforestation, which can lead to soil erosion, water pollution, habitat destruction, and increased greenhouse gas emissions. To address these challenges, the article advocates for the use of efficient extraction techniques and renewable energy sources, prioritizing environmental considerations throughout the production process. Furthermore, the methods for reducing energy consumption, water usage, and chemical inputs during manufacturing by implementing eco-friendly technologies. It stresses the importance of developing robust disposal systems for biodegradable materials and supports recycling initiatives to minimize the need for new resources. The holistic approach to sustainability, including responsible feedstock cultivation, efficient production practices, and effective end-of-life management. It underscores the need to evaluate the potential of bioplastics to reduce plastic pollution, considering technological advancements, infrastructure development, and increased consumer awareness. Future research should focus on enhancing production sustainability, understanding long-term ecological impacts, and advancing bioplastics technology for better performance and environmental compatibility. This comprehensive analysis of bioplastics' ecological footprint highlights the urgent need for sustainable solutions in plastic production.

Impact of Climate Change on Environmental Chemistry: A Review

Environmental chemistry changed greatly with climate change, thereby influencing chemical processes in the atmosphere, hydrosphere and lithosphere. This review assessed this by examining changes in atmospheric chemistry, water chemistry, soil chemistry and biogeochemical cycles. Rising global temperatures and increased greenhouse gas emissions have changed atmospheric chemical reactions leading to alterations in air quality and the formation of secondary pollutants. Water temperature shifts and changes in water chemistry caused by climate change impacted marine biogeochemistry through ocean acidification. Nutrient cycling, soil organic matter and metal mobility were also altered as a result of soil chemistry effects. Additionally, the review focused on mitigation and adaptation strategies that involved the development of green technologies and sustainable practices for managing climate change impacts. In this analysis, environmental chemistry was emphasized as having a significant role in understanding climate change challenges through synthesis of present research works. The end also recommended further studies to be conducted while suggesting interdisciplinary approaches along with long-term monitoring needed to improve our knowledge about climate change impacts and enable policy makers take sound decisions.

Stakeholder-driven transformative adaptation is needed for climate-smart nutrition security in sub-Saharan Africa

Improving nutrition security in sub-Saharan Africa under increasing climate risks and population growth requires a strong and contextualized evidence base. Yet, to date, few studies have assessed climate-smart agriculture and nutrition security simultaneously. Here we use an integrated assessment framework (iFEED) to explore stakeholder-driven scenarios of food system transformation towards climate-smart nutrition security in Malawi, South Africa, Tanzania and Zambia. iFEED translates climate–food–emissions modelling into policy-relevant information using model output implication statements. Results show that diversifying agricultural production towards more micronutrient-rich foods is necessary to achieve an adequate population-level nutrient supply by mid-century. Agricultural areas must expand unless unprecedented rapid yield improvements are achieved. While these transformations are challenging to accomplish and often associated with increased greenhouse gas emissions, the alternative for a nutrition-secure future is to rely increasingly on imports, which would outsource emissions and be economically and politically challenging given the large import increases required.

Permafrost degradation and soil erosion as drivers of greenhouse gas emissions from tundra ponds

Climate change poses a serious threat to permafrost integrity, with expected warmer winters and increased precipitation, both raising permafrost temperatures and active layer thickness. Under ice-rich conditions, this can lead to increased thermokarst activity and a consequential transfer of soil organic matter to tundra ponds. Although these ponds are known as hotspots for CO2 and CH4 emissions, the dominant carbon sources for the production of greenhouse gases (GHGs) are still poorly studied, leading to uncertainty about their positive feedback to climate warming. This study investigates the potential for lateral thermo-erosion to cause increased GHG emissions from small and shallow tundra ponds found in Arctic ice-wedge polygonal landscapes. Detailed mapping of fine-scale erosive features revealed their strong impact on pond limnological characteristics. In addition to increasing organic matter inputs, providing carbon to heterotrophic microorganisms responsible for GHG production, thermokarst soil erosion also increases shore instability and water turbidity, limiting the establishment of aquatic vegetation—conditions that greatly increase GHG emissions from these aquatic systems. Ponds with more than 40% of the shoreline affected by lateral erosion experienced significantly higher rates of GHG emissions (∼1200 mmol CO2 m−2 yr−1 and ∼250 mmol CH4 m−2 yr−1) compared to ponds with no active shore erosion (∼30 mmol m−2 yr−1 for both GHG). Although most GHGs emitted as CO2 and CH4 had a modern radiocarbon signature, source apportionment models implied an increased importance of terrestrial carbon being emitted from ponds with erosive shorelines. If primary producers are unable to overcome the limitations associated with permafrost disturbances, this contribution of older carbon stocks may become more significant with rising permafrost temperatures.

Microalgae-based biofertilizer improves fruit yield and controls greenhouse gas emissions in a hawthorn orchard.

Raising attentions have focused on how to alleviate greenhouse gas (GHG) emissions from orchard system while simultaneously increase fruit production. Microalgae-based biofertilizer represents a promising resource for improving soil fertility and higher productivity. However, the effects of microalgae application more especially live microalgae on GHG emissions are understudied. In this study, fruit yield and quality, GHG emissions, as well as soil organic carbon and nitrogen fractions were examined in a hawthorn orchard, under the effects of live microalgae-based biofertilizer applied at three doses and two modes. Compared with conventional fertilization, microalgae improved hawthorn yield by 15.7%-29.6% with a maximal increment at medium dose by root application, and significantly increased soluble and reducing sugars contents at high dose. While microalgae did not increase GHG emissions except for nitrous oxide at high dose by root application, instead it significantly increased methane uptake by 1.5-2.3 times in root application. In addition, microalgae showed an increasing trend in soil organic carbon content, and significantly increased the contents of soil dissolved organic carbon and microbial biomass carbon, as well as soil ammonium nitrogen and dissolved organic nitrogen at medium dose with root application. Overall, the results indicated that the live microalgae could be used as a green biofertilizer for improving fruit yield without increasing GHG emissions intensity and the comprehensive greenhouse effect, in particular at medium dose with root application. We presume that if lowering chemical fertilizer rates, application of the live microalgae-based biofertilizer may help to reduce nitrous oxide emissions without compromising fruit yield and quality.

PV integrated shipboard MVDC grid with reduced bus voltage ripple

Integration of renewable energy sources for power generation is a proven solution to reduce the increasing greenhouse gas emissions towards decarbonisation onboard ships. Also, it is easy to integrate a variety of energy sources in an all-electric ship under medium voltage direct current distribution system. In such distribution system, high frequency switching power converters are greatly involved on the source and the load sides, which are massive source of harmonics. In this paper, a grid connected photovoltaic module is designed and paralleled with the generator, as a step towards reducing greenhouse gas emissions. Additionally, to take care of the voltage ripple and noise created by the high frequency switching power converters in the system, a shunt direct current electric spring with a control strategy is incorporated. The proposed system eliminates the use of heavy passive filters, commonly used at the rectifier end. MATLAB/Simulink results substantiate that the increased voltage ripple with the inclusion of energy sources and loads, that goes around 10.91% under fully loaded condition, is reduced to 1.27% with the shunt direct current electric spring, hence well within the IEEE 1709 std., which is less than 5%.

Declining Geoengineering Efficacy Caused by Cloud Feedbacks in Transient Solar Dimming Experiments

Abstract Solar radiation management (SRM) with injections of aerosols into the stratosphere has emerged as a research area of focus with the potential to cool the planet. However, the amount of SRM required to achieve a given level of cooling, and how this relationship evolves in response to increasing greenhouse gas emissions, remains uncertain. Here, we explore the evolution of solar dimming efficacy over time by defining and quantifying a new SRM feedback term, which is analogous to conventional radiative feedbacks. Using Earth system model simulations that dynamically adjust the amount of insolation to offset global mean warming from increasing CO2, we find that positive SRM feedbacks decrease global planetary albedo and diminish the efficacy of solar dimming. Physically, the decrease in albedo is primarily due to reductions in optically thick tropical cloud fraction in the boundary layer and midtroposphere, which is driven by a drying and destabilization of the tropical mid- to lower troposphere. These results offer an energetic explanation for reduced cloud fraction commonly observed in idealized SRM experiments, as well as reaffirm the need to understand the troposphere response, particularly from clouds, in realizable geoengineering experiments and their potential to feed back onto SRM efficacy. Significance Statement The goal of this study is to understand how the effectiveness of solar geoengineering may evolve over time. Using a climate model with the ability to directly tune the amount of incoming sunlight, we explore the potential for feedback loops in the climate system to diminish or amplify the desired effect of solar tuning, which is to offset greenhouse gas–induced warming. For this climate model and this solar geoengineering proxy, in particular, we find that feedback loops reduce Earth’s albedo and therefore diminish the desired effect of turning down the sun over time. This study lays the groundwork for understanding potential feedback loops in climate model simulations that represent solar geoengineering in a more realistic way.

Global production patterns: Understanding the relationship between greenhouse gas emissions, agriculture greening and climate variability

Climate change due to increased greenhouse gas emissions (GHG) in the atmosphere has been consistently observed since the mid-20th century. The profound influence of global climate change on greenhouse gas (GHG) emissions, encompassing carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O), has established a vital feedback loop that contributes to further climate change. This intricate relationship necessitates a comprehensive understanding of the underlying feedback mechanisms. By examining the interactions between global climate change, soil, and GHG emissions, we can elucidate the complexities of CO2, CH4, and N2O dynamics and their implications. In this study, we evaluate the global climate change relationship with GHG globally in 246 countries. We find a robust positive association between climate and GHG emissions. By 2100, GHG emissions will increase in all G7 countries and China while decreasing in the United Kingdom based on current economic growth policies, resulting in a net global increase, suggesting that climate-driven increase in GHG and climate variations impact crop production loss due to soil impacts and not provide climate adaptation. The study highlights the diverse strategies employed by G7 countries in reducing GHG emissions, with France leveraging nuclear power, Germany focusing on renewables, and Italy targeting its industrial and transportation sectors. The UK and Japan are making significant progress in emission reduction through renewable energy, while the US and Canada face challenges due to their industrial activities and reliance on fossil fuels.

Greenhouse gas contribution and emission reduction potential prediction of China's aluminum industry

The aluminum industry, with its traditionally high energy consumption, high emissions and high pollution, is facing increasing pressure to reduce greenhouse gas (GHG) emissions in China. This study analyzes the trajectory and characteristics of GHG emissions during the lifecycle of China's aluminum industry (CAI) from 2011 to 2020, and identifies key driving factors affecting the changes in GHG emissions from CAI. The results indicate that the GHG emissions of CAI mainly come from indirect emissions generated by electricity production (over 69 %). Electrolytic aluminum is the largest sub process of GHG emissions in CAI. In addition, the total energy consumption effect is the main driving factor for the increase in GHG emissions from CAI. On this basis, emission reduction measures are proposed, the economic benefits and applicability of various emission reduction measures are analyzed, and the grey prediction model GM (1,1) is used to predict the GHG emission reduction potential of CAI in 2030. According to analysis, the GHG emission reduction efficiency of CAI is expected to reach 86 % by 2030, and can produce an annual economic benefit of 2.93 × 109RMB. This study will provide a theoretical basis for GHG emission reduction in CAI and even the global aluminum industry (GAI).

Valorization of Plastic Wastes for the Development of Adsorbent Designed for the Removal of Emerging Contaminants in Wastewater

Plastic waste accrual in the environment has been identified as the topmost significant global issue related to modern civilization. Traditional waste disposal methods, such as open burning, landfilling, and incineration, have increased greenhouse gas emissions in economic and material losses. Unless immediate action is made to curtail demand, prolong product lifespans, enhance waste management, and encourage recyclability, plastic pollution will increase due to an almost threefold increase in plastic use spurred by growing populations and affluence. Plastic production primarily is from crude oil or gas despite more than a fourfold growth from ~6.8 million tonnes in 2000 to ~30 million tonnes in 2019; only ~6% of the world’s total plastics production is made from recycled plastics. The competitiveness and profitability of secondary markets may increase with the establishment of recycled content objectives and advancements in recycling technology. In this review, emerging approaches and the creation of value-added materials from waste plastics such as carbon nanotubes and other carbonaceous nanomaterials production, the environmental impacts of plastic waste, African status concerning plastic waste, the importance of modern techniques in plastic waste management, and the circular economy impact on plastic waste utilization are the high points of this study.