This paper presents a method for obtaining time dependent back face deformation (BFD) data for body armor during ballistic impact using a clear ballistics gelatin backing and high-speed cameras to capture the deformation profile. Using this method, baseline fabric characterization data was obtained for samples comprised of varying layers of 467 g/m2 Kevlar K29 fabric impacted with 8.24 g steel ball projectile and backed with NATO standard 20% clear ballistics gelatin. For these tests, deformation depths were seen to increase with increasing impact energy and decreasing total areal density. A limited study of the various test parameters was performed by testing one additional fabric, projectile, and ballistics gelatin. From these comparisons, it was observed that 122 g/m2 Kevlar KM2+ fabric performs better per weight than 467 g/m2 Kevlar K29 fabric in terms of BFD, 9 mm FMJ projectiles produce deeper BFDs than 12.7 mm steel ball projectiles, and backing a sample with FBI standard 10% ballistics gel increases the BFD considerably over NATO standard 20% ballistics gel.