Increase In Current Intensity Research Articles

Effect of current intensity on molten pool and solidification in vacuum arc remelting process of Ti60 alloy

Current intensity is a critical parameter in the vacuum arc remelting (VAR) process, significantly impacting the molten pool, solidification structure, and ultimately, the quality of the ingot. This study establishes a transient electromagnetic-fluid-thermal-solidified coupled model to examine the effects of current intensity on the shape of molten pool and the solidification process of Ti60 alloy ingots produced by VAR process. Findings indicate that with the increase in current intensity, there is a corresponding rise in the magnetic induction intensity, current density, and Lorentz force. This enhancement leads to more vigorous flow in the liquid phase, creating a vortex flow opposing to the ingot's center at the boundary, influenced by the strong current. As a consequence, the molten pool's shape tends to shift from a “V” shape to a “U” shape, and the depth of molten pool increases while the mushy zone thickness diminishes. For instance, at 17000 A, the depth of molten pool surges by 57.43%, and the mushy zone thickness contracts by 62.01% compared to 5000 A. Over time, the depth of molten pool gradually decreases, with its reduction range ( Δh) within 400 to 6000 s inversely related to current intensity. At 17000 A, Δh is 23.71% less than at 5000 A. Furthermore, elevating the current intensity results in a higher temperature gradient within the ingot and a marked reduction in local solidification time, particularly in the ingot's central area.

Experimental Investigation of Current Intensity and Feed Speed in Electrically Assisted Necking and Thickening of 5A02 Aluminum Alloy Tubes.

In order to further explore the forming limits of thin-wall tube necking and thickening, and obtain sufficient thickness of the tube in the thickening area, local electric pulse-assisted forming experiments were carried out to study the effects of current intensity and feed speed on the necking and thickening forming of thin-wall tube. The experimental results show that with the increase in current intensity, the temperature in the forming area of the tube increases, and the forming load for necking and thickening decreases. However, with the increase in feed speed, the overall forming load for necking and thickening increases in general, and the smaller feed speed is more conducive to forming. Taking into account the forming efficiency and electrode loss, the corresponding forming process window is obtained for the manufacturing of good parts. That is, during the necking stage, the current intensity shall not be less than 300 A, and the feed speed shall not exceed 10 mm/min. During the thickening stage, the current intensity should not be less than 1400 A, and the feed speed should not exceed 1 mm/min. The target part is finally formed, with an average wall thickness of 5.984 mm in the thickening zone and a thickening rate of 303.2%.

Simulation and Experimental Study of Fluid Flow and Solidification Behavior in Thin Slabs Continuous Casting Process under Secondary Electromagnetic Stirring

During the thin slab continuous casting process of silicon steel, electromagnetic stirring (EMS) can control the flow, heat transfer, and solidification of molten steel through electromagnetic force. Herein, a 3D mathematical model coupling the fluid flow, heat transfer, solidification, and the electromagnetic field is built. The effects of varied current intensities on the flow, heat transfer, and solidification of molten steel in the thin slab under secondary EMS are explored based on applying the electromagnetic brake in the mold region. In the findings, it is demonstrated that increasing the current intensity increases the flow rate and vorticity of the molten steel in the second cooling zone, eliminating the superheating phenomenon and improving the uniformity of the molten steel's temperature distribution. Meanwhile, based on the nucleation and growth parameters determined from thermal simulation experiments, the cellular automation finite‐element model is used to simulate the microstructure evolution during the solidification of thin slab. In the results, it is shown that the stirring energy increases when the current intensity increases, potentially promoting equiaxed crystal growth and grain refinement. Compared to the production sample, a reasonable qualitative agreement is achieved for the grain morphology, equiaxed crystal ratio, and columnar to equiaxed transition.

Principal-Internal Joint Resonance of an Axially Moving Beam with Elastic Constraints and Excited by Current-Carrying Wires

Principal-internal joint resonance of an axially moving beam with elastic constraints is investigated, where the beam is located in magnetic field excited by current-carrying wires. Based on the magnetoelasticity theory and Hamilton principle, the nonlinear magneto-elastic vibration equations are derived. The displacement function is obtained by the elastic constraint boundary condition, and then the equation is discretized into 2-DOF ordinary differential equations using the Galerkin integral method. The method of multiple scales is employed for obtaining the amplitude–frequency response equations with coupling of the first two vibration modes. Through examples, amplitudes varying with frequency tuning parameter, axial velocity, current intensity, and external excitation force are exhibited. Results indicate that as current intensity increases, electromagnetic damping increases and the amplitude decreases; As external excitation force increases and axial velocity decreases respectively, the amplitude increases and the system changes from single periodic motion to quasi-periodic motion and then to single periodic motion; The lower-order modes are always dominant when the principle-internal resonance occurs.

Effect of electromagnetic stirring on the transient flow, solidification and inclusion movements in the continuous casting slab mold

PurposeThe purpose of this study is to explore how a time-varying electromagnetic stirring (EMS) affects the fluid flow and solidification behavior in a slab caster continuous casting mold. Further, the study of inclusion movements in the mold is carried out under the effect of a time-varying electromagnetic field.Design/methodology/approachA three-dimensional coupled numerical model of solidification and magnetohydrodynamics has been developed for slab caster mold to investigate the inclusions transport by discrete phase model with the use of user-defined functions. Enthalpy porosity and the Lagrangian approach are applied to analyze the behavior of solidification and inclusion.FindingsThe study shows that the magnetic field density distribution has a radial symmetry in relation to the stirrer’s center. As the EMS current intensity increases, the strength of the lower recirculation zone gradually decreases and nearly disappears at higher intensities. Additionally, the area of localized remelting zone expands in the solidification front with rising current intensity. The morphology of inclusions and EMS current intensity have a significant impact on the behavior and movement of inclusions within the molten steel.Practical implicationsBy using the model, one can optimize the EMS parameter to enhance the quality of steel casting through the elimination of impurities and by improving the microstructure of cast that mainly depend on solidification and flow patterns of molten steel.Originality/valueUntil now, the use of time-varying EMS in the slab caster mold to study solidification and inclusion behavior has not been explored.

Growth simulation based on diffusion-limited aggregation method for dendritic interfacial electrodes inside IPMC

Ionic polymer metal composites (IPMCs) with dendritic interfacial electrodes (DIEs) have attracted attention in recent years due to their excellent actuation performance. Although considerable efforts have been made to develop aggregation models of metal particles for the electrode formation of IPMC, there are few reports to simulate the growth of DIEs inside IPMC. In this work, we proposed an electrode model based on diffusion-limited aggregation method to simulate the growth process of DIEs inside IPMC by referring their preparation parameters and morphology characteristics. Meanwhile, the effects of immersion reduction (IR) cycles, immersion electroplating (IEP) time, IEP cycles, current intensity and voltage amplitude on the morphology and microstructure of DIEs were studied. It was found that the depth and the density of DIEs inside IPMC gradually increased with the increase of IR cycles, IEP time and IEP cycles. However, the growth depth of DIEs decreased significantly with the increase of current intensity. In addition, the voltage amplitude has little effect on the DIEs. This model is of great significance to the study of the formation mechanism of IPMC with DIEs.

Design and Construction of Electronic Muscle Stimulator (EMS)

The project is titled Design and Construction of Electronic Muscle Stimulator (EMS) with embedded time Display unit and Dual Source of Powering. The EMS is a type of electrotherapy device that functions by stimulating muscle contraction using electrical impulses to strengthen weak muscles, reduce swelling, aid in blood circulations that helps to heal wounds. These impulses are generated by the device and deliver through electrode pads over the area that requires stimulation. The impulses from EMS mimic the action potential (the stimulus required to contract the muscle) that naturally comes from central nervous system (CNS). Proteus, software simulation Library was used to simulate the components and to understand the behaviour of the output stage. After that, hardware components were assembled together that gave rise to this EMS apparatus. Designing of the device was completed with different modes tagged Press, Thump, Rub, and vibrate with frequencies 40Hz, 20Hz, 10Hz, and 3Hz respectively. The project was completed and human experiment was carried and result showed that decrease in impedances brings increase in current intensity.

Activity and stability of bifunctional perovskite/carbon-based electrodes for the removal of antipyrine by electro-Fenton process

Bifunctional perovskite/carbon-black(CB)/polytetrafluoroethylene(PTFE) electrodes for electro-generation and catalytic decomposition of hydrogen peroxide to oxidizing hydroxyl radicals have been fabricated. These electrodes were tested for electroFenton (EF) removal of antipyrine (ANT) as a model antipyretic and analgesic drug. The influence of the binder loading (20 and 40 wt % PTFE) and type of solvent (1,3-dipropanediol and water) was studied for the preparation of CB/PTFE electrodes. The electrode prepared with 20 wt % PTFE and water exhibited a low impedance and remarkable H2O2 electro-generation (about 1 g/L after 240 min, a production rate of ca. 6.5 mg/h·cm2). The incorporation of perovskite on CB/PTFE electrodes was also studied following two different methods: i) direct deposition on the CB/PTFE electrode surface and ii) addition in the own CB/PTFE/water paste used for the fabrication. Physicochemical and electrochemical characterization techniques were used for the electrode's characterization. The dispersion of perovskite particles in the own electrode matrix (method ii) exhibited a higher EF performance than the immobilisation onto the electrode surface (method i). EF experiments at 40 mA/cm2 and pH 7 (non-acidified conditions) showed ANT and TOC removals of 30% and 17%, respectively. The increase of current intensity up to 120 mA/cm2 achieved the complete removal of ANT and 92% of TOC mineralisation in 240 min. The bifunctional electrode also proved high stability and durability after 15 h of operation.

Effect of Mold Electromagnetic Stirring on Metallurgical Behavior in Ultrahigh Speed Continuous Casting Billet Mold

A three‐dimensional model of fluid flow, heat transfer, solidification, and inclusion motion in billet mold at ultrahigh casting speed under electromagnetic field is developed. The low Reynolds number k–ε model coupled with electromagnetic model and Lagrangian discrete phase model is used to investigate the flow field, temperature field, solidification, and inclusions transport under different current intensities. The results show that mold electromagnetic stirring (M‐EMS) significantly alters the flow pattern of molten steel. The impact depth of the molten steel decreases as the stirring current intensity increases, and the horizontal swirl intensities of the molten steel increase with the stirring current intensity. As the current intensity increases from 500 to 700 A, the impact depth decreases from 0.637 to 0.575 m and the maximum tangential velocity increases from 0.477 to 0.898 m s−1. When the stirring current is intense, the flow of molten steel near the mold exit is reversed, and the molten steel flows asymmetrically and unsteadily. The M‐EMS effectively improves the transverse heat transfer of the molten steel in the mold, contributing to the dissipation of the molten steel superheat and the growth of the solidified shell. In addition, the removal ratio of the inclusions is improved significantly.

Effects of Citrullus colocynthis Seed Aqueous Extracts upon Sodium Transport across A6 Kidney Cell Monolayers

Various extracts from Citrullus colocynthis seeds were recently examined for their possible favorable effects on glucose homeostasis, other metabolic variables, and pancreatic islet size in streptozotocin-induced diabetic rats. Considering the effectiveness of insulin upon target cells as another process susceptible to being influenced by plant extracts, the present study is used to compare the effects of either crude or defatted aqueous extracts from C. colocynthis seeds upon Na + transport in A6 kidney cells. The intensity of electrical currents, taken as the potential difference divided by the epithelial resistance was measured in monolayers of A6 kidney cells exposed at the basolateral side to either crude untreated aqueous (EI) or defatted aqueous (EII) extracts, as well as their fractions EI1and EII1 containing components with high molecular weight (↑5 kDa) and EI2 and EII2 containing components with low molecular weight (↓5 kDa). The effect of insulin was to assess the functional integrity of the A6 monolayer. All extracts caused a rapid and sustained increase in current intensity. The defatted aqueous extract (EII) was more efficient than the non-defatted aqueous extract (EI) in terms of increasing the intensity of current in the A6 monolayer. The components of the defatted aqueous extract responsible for such a greater efficiency were located in the fraction containing components with low molecular weight and acted in a time-related progressive fashion upon Na + transport. These data suggest that colocynth seed extracts mainly extract containing components with low molecular weight increased the current intensity in A6 cells, thus suggesting that colocynth may affect Na + transport in kidney cells.

Electromagnetic interference prediction technology of new energy motor drive system

Abstract New energy vehicles in the running process inevitably produce common and differential modes such as electromagnetic interference (EMI), to forecast motor drive system. This paper analyses the mechanism of EMI, and to find out the EMI sources and transmission ways, motor drive system for motor disturbance component modelling analysis is done, along with EMI test. The results show that the difference between the peak value and the minimum value of conducted radiation increases with the increase of current and has no relation to the frequency. Both near-field radiation and current are related to frequency. With the increase of current intensity, radiation intensity migrates from low frequency to high frequency, and the gap between the peak value and the minimum value also increases.

Degradation of COD in antibiotic wastewater by a combination process of electrochemistry, hydroxyl-functionalized ball-milled zero-valent iron/Fe3O4 and Oxone

ABSTRACT In this study, the significant iron-based material, hydroxyl-functionalized ball-milled zero-valent iron/Fe3O4 (HFB-ZVI/Fe3O4) was employed for the experiments. The performance of the Electro + HFB-ZVI/Fe3O4 + Oxone system for the degradation of chemical oxygen demand (COD) in antibiotic wastewater was investigated. A direct current was applied between a graphite plate anode and two iron plate cathodes, and a series of operational parameters, such as applied electric current, the dosage of HFB-ZVI/Fe3O4 composite, the dosage of Oxone, and initial solution pH, were explored to evaluate the oxidation process. The application of electric current enhanced the gradual degradation of COD and the increase of current intensity accelerated COD degradation. The neutral condition was favourable for the rapid degradation of COD in a short reaction time by the Electro + HFB-ZVI/Fe3O4 + Oxone process and promoted the degradation efficiency of COD. An increase of electric current gradually decreased the reaction solution pH, the larger the electric current applied in the reaction process, the lower the final pH of the reaction solution. Under the optimal experimental conditions (1 g/L HFB-ZVI/Fe3O4 composite, 0.3 g/L Oxone, current intensity = 500 mA, initial solution pH = 7.85), Electro + HFB-ZVI/Fe3O4 + Oxone achieved 99% COD degradation in antibiotic wastewater. Radicals quenching experiments indicated the contribution to COD degradation by hydroxyl radicals (HO•), sulphate radicals (SO4 •–) and other oxidants were 66.03%, 24.014% and 9.756%, respectively. The possible mechanism of COD degradation in the Electro + HFB-ZVI/Fe3O4 + Oxone system was also discussed in this study. The findings in this work provided useful information for the treatment of wastewater.

A portable neurostimulator circuit with anodic bias enhances stimulation injection capacity

Objective. Electrochemically safe and efficient charge injection for neural stimulation necessitates monitoring of polarization and enhanced charge injection capacity of the stimulating electrodes. In this work, we present improved microstimulation capability by developing a custom-designed multichannel portable neurostimulator with a fully programmable anodic bias circuitry and voltage transient monitoring feature. Approach. We developed a 16-channel multichannel neurostimulator system, compared charge injection capacities as a function of anodic bias potentials, and demonstrated convenient control of the system by a custom-designed user interface allowing bidirectional wireless data transmission of stimulation parameters and recorded voltage transients. Charge injections were conducted in phosphate-buffered saline with silicon-based iridium oxide microelectrodes. Main results. Under charge-balanced 200 µs cathodic first pulsing, the charge injection capacities increased proportionally to the level of anodic bias applied, reaching a maximum of ten-fold increase in current intensity from 10 µA (100 µC cm−2) to 100 µA (1000 µC cm−2) with a 600 mV anodic bias. Our custom-designed and completely portable 16-channel neurostimulator enabled a significant increase in charge injection capacity in vitro. Significance. Limited charge injection capacity has been a bottleneck in neural stimulation applications, and our system may enable efficacious behavioral animal study involving chronic microstimulation while ensuring electrochemical safety.

Surfactants in electrokinetic remediation of sediments to enhance the removal of metals

PurposeThe study focuses on the use of surfactants as enhancing solutions in electrokinetic remediation trials on sediments, with the hypothesis that they will allow heavy metals to desorb from organic matter, and thus favour their removal to the solution.Materials and methodsA total of 15 remediation trials were conducted. As enhancing solutions, four different non-ionic commercial surfactants were used, either alone or in combination with citric acid (CA) or ethylenediaminetetraacetic acid (EDTA) in both compartments. A comparison with distilled water was also performed. 30–40 VDC was applied between activated titanium electrodes. The pH, electroosmotic flow (EOF), mineralogy of the samples (before and after the electrokinetic tests), and the percentage of removal of Cr, Ni, Cu, Zn, As, Cd, Pb, and Hg were determined.Results and discussionEvery test showed an increase in current intensity during the first hours, and in certain cases, additional intensity peaks were found during the trial, which were mostly attributed to the establishment of EOF episodes. Depending on the case, EOF was transferred to the anolyte or the catholyte. Reversal of EOF occurred in one case, but was not detected in the others. Cr was primarily removed when CA was used. In the catholite, Ni, Cu, Zn, and Pb were extracted preferentially with EDTA. Surfactant B was more effective at removing Zn and As. Only a few treatments removed Cd with CA and surfactant C extracting the most. Hg was detected in the electrolytes of some experiments, being extracted with surfactant A in the catholyte in all cases, and with surfactant B and surfactant C with EDTA. Cr, Ni, Cu, Zn, Cd, and Pb were preferentially collected in the anolyte. Cu and Zn were found in trace levels in the catholyte.ConclusionsSurfactants have been shown to help with metal solubilisation to different degrees depending on the metal. Each metal has a unique optimal species combination in the enhancing electrolyte. The direction of the EOF is determined by the chemical conditions of the system as a whole, not by the type of surfactant. Surfactants in combination with CA and EDTA improve desorption in general, which has been attributed to an increase in charge density passed during the tests rather than a symbiotic enhancement between both types of enhancing solutions.

Two-phase bio-nanofluid flow through a bifurcated artery with magnetic field interaction

A modified multiphase flow model is applied for a better understanding of bio-nanofluid (blood containing 4% (w/v) Fe3O4 nanoparticles) flow regimes through a real bifurcated artery. The magnetic field with distinct current intensities (I = 0 – 300 A) was employed to induce the flow features when the wire's source is placed nearby the junction of the asymmetrical branched artery during numerical computation. The finite volume method was used to solve the coupled hemodynamics model. Results show that the pressure, and vorticity profiles increased and fallen gradually with the existence of the magnetic source and further obtained the maximum pressure for the strong current intensity (I = 300 A). The fluctuating vorticity distributions are found along the inner and outer vessel wall as well as the predicted lines created within the simulated domain for the increase of current intensity. The velocity outlines variates steadily, and the local peak velocities are obtained with the increase of the magnetic force. With the increment of the current intensity upto I = 300 A, the flow rate rises progressively for the asymmetric branched vessel, and the opposite scenario is found for the root vessel. The temperature profiles decrease steadily with the increment of the applied current intensity. With the manifestation of the magnetic source, the irregular flow behaviours are found within the asymmetrical bifurcated artery. This modeling investigation could be beneficial for the emergent therapy plan of ample vascular diseases as the magnetic drug targeting system.

Effect of electromagnetic parameters on melt flow and heat transfer of AZ80 Mg alloy during differential phase electromagnetic DC casting based on numerical simulation

Based on multi-physical field coupling numerical simulation method, magnetic field distribution, melt flow, and heat transfer behavior of a Φ300 mm AZ80 alloy billet during differential phase electromagnetic DC casting (DP-EMC) with different electromagnetic parameters were studied. The results demonstrate that the increase in current intensity only changes the magnitude but does not change the Lorentz force’s distribution characteristics. The maximum value of the Lorentz force increases linearly followed by an increase in current intensity. As the frequency increases, the Lorentz force’s r component remains constant, and the z component decreases slightly. The change in current intensity correlates with the melt oscillation and convection intensity positively, as well as the liquid sump temperature uniformity. It does not mean that the higher the electric current, the better the metallurgical quality of the billet. A lower frequency is beneficial to generate a more significant melt flow and velocity fluctuation, which is helpful to create a more uniform temperature field. Appropriate DP-EMC parameters for a Φ300 mm AZ80 Mg alloy are 10–20 Hz frequency and 80–100 A current intensity.

Investigating the effect of injection rate on the capture efficiency of nanoparticles in different geometries of stenosed vessel

In this study, the effect of injection speed on the capture efficiency (CE) of nanoparticles under the influence of a magnetic field produced by a current-carrying wire is investigated. Three scenarios have been considered for the geometry of stenosis: (1) symmetrical stenosis, (2) upper wall stenosis, and (3) lower wall stenosis. The non-Newtonian behavior of blood has been modeled using the Carreau model. The effect of different parameters, including magnetic field, drag force, particle diameter, injection speed, blood velocity, and the shape of stenosis on the CE of nanoparticles, is investigated. Considering the injection speed along with non-Newtonian model in a vessel with stenosis is not addressed yet, and are investigated in the present study. The results show that blood velocity and particle diameter have a significant effect on the CE of nanoparticles. Besides, it was revealed that there is a threshold for current intensity (I = 0.009A). At the threshold, CE of nanoparticles is maximum (27.5%), and further increase in current intensity resulting in a dramatic reduction in CE. In all scenarios, as the injection speed increases, the CE of nanoparticles decreased. For example, for scenario 3, as the injection speed increased from 75 mm/s to 200 mm/s, the CE of nanoparticles reduced from 25% to 7.5%, respectively. Besides, for same injection speed, for example 75 mm/s, the CE of scenarios 1, 2, and 3 are 3%, 22.5%, and 25%, respectively. The upper wall stenosis is desired scenario in which the maximum carrier particles are captured at tumor site.

Effects of parameters selection with transcranial direct current stimulation based on real head model

Transcranial direct current stimulation (tDCS) is a brain stimulation intervention technique, which has the problem of different criteria for the selection of stimulation parameters. In this study, a four-layer real head model was constructed. Based on this model, the changes of the electric field distribution in the brain with the current intensity, electrode shape, electrode area and electrode spacing were analyzed by using finite element simulation technology, and then the optimal scheme of electrical stimulation parameters was discussed. The results showed that the effective stimulation region decreased and the focusing ability increased with the increase of current intensity. The normal current density of the quadrilateral electrode was obviously larger than that of the circular electrode, which indicated that the quadrilateral electrode was more conducive to current stimulation of neurons. Moreover, the effective stimulation region of the quadrilateral electrode was more concentrated and the focusing ability was stronger. The focusing ability decreased with the increase of electrode area. Specifically, the focusing tended to increase first and then decrease with the increase of electrode spacing and the optimal electrode spacing was 64.0-67.2 mm. These results could provide some basis for the selection of electrical stimulation parameters.

Maximizing Charge Injection Limits of Iridium Oxide Electrodes with a Programmable Anodic Bias Circuit.

Efficacious stimulation of neural tissues requires high charge injection capacity while minimizing electrode polarization. Applying anodic bias on certain electrode materials is a way to enhance charge injection both in vitro and in vivo. We developed an embedded neurostimulator system that enabled a digital control of user-defined bias levels, without requiring a potentiometer or external voltage source. Comparison of charge injection with and without anodic-bias, as well as at different bias potentials were conducted in phosphate-buffered saline with Blackrock iridium oxide microelectrodes. Results showed that a nine-fold increase in current intensity and charge injection capacity, was achieved with a 0.7 V anodic bias and within electrochemically safe limits.

Electrochemical oxidation and electroanalysis of paracetamol on a boron-doped diamond anode material in aqueous electrolytes

Electrochemical oxidation of paracetamol on boron-doped diamond (BDD) anode has been studied by cyclic voltammetry and preparative electrolysis. Quantification of paracetamol during electrolysis has been mainly realized by differential pulse voltammetry technique in the Britton-Robinson buffer solutions used as the supporting electrolyte. Various parameters such as current intensity, nature of the supporting electrolyte, temperature, and initial concentration of paracetamol have been investigated. The electrochemical characterization by the outer sphere Fe(III)/Fe(II) redox couple has also been performed, showing the metallic character of BDD electrode. The obtained linear dependency of the oxidation peak current intensity and paracetamol concentration indicates that BDD electrode can be used as an electrochemical sensor for the detection and quantification of paracetamol. The investi­gation of paracetamol degradation during preparative electrolysis showed that: (i) the degradation rate of paracetamol increases with increase of current intensity applied; (ii) for the initial concentrations of 10, 6 and 1 mM of paracetamol, its oxidation rate reaches 60, 78 and 99 % respectively, after 1 h of electrolysis in 0.3 M H2SO4 (pH 0.6) at applied current density of 70 mA cm-2; (iii) at temperatures of electrolyte solution of 28, 55 and 75 °C, paracetamol oxidation rate reached 85, 92 and 97 % respectively, after 2 h at applied current density of 70 mA cm2. From the investigation of the effect of pH value of electrolyte solution, it appears that oxidation of paracetamol is more favorable in acidic solution at pH 3 than solutions of higher pH values.