In-plane Direction Research Articles

Highly Responsive Polar Vortices in All-Ferroelectric Heterostructures.

The discovery of polar vortices and skyrmions in ferroelectric-dielectric superlattices [such as (PbTiO3)n/(SrTiO3)n] has ushered in an era of novel dipolar topologies and corresponding emergent phenomena. The key to creating such emergent features has generally been considered to be related to counterpoising strongly polar and non-polar materials thus creating the appropriate boundary conditions. This limits the utility these materials can have, however, by rendering (effectively) half of the structure unresponsive to applied stimuli. Here, using advanced thin-film deposition and an array of characterization and simulation approaches, polar vortices are realized in all-ferroelectric trilayers, multilayers, and superlattices built from the fundamental building block of (PbTiO3)n/(PbxSr1- xTiO3)n wherein in-plane ferroelectric polarization in the PbxSr1- xTiO3 provides the appropriate boundary conditions. These superlattices exhibit substantially enhanced electromechanical and ferroelectric responses in the out-of-plane direction that arise from the ability of the polarization in both layers to rotate to the out-of-plane direction under field. In the in-plane direction, the layers are found to be strongly coupled during switching and when heterostructured with ferroelectric-dielectric building blocks, it is possible to produce multistate switching. This approach expands the realm of systems supporting emergent dipolar texture formation and does so with entirely ferroelectric materials thus greatly improving their responses.

Mechanical properties of phenolic foam composite meta-aramid honeycomb under various directional loads and thermal environments

To enhance the mechanical properties of honeycomb structures, a phenolic foam composite meta-aramid honeycomb core (PFAH) was developed. Experimental, simulation, and theoretical analyses revealed that PFAH increased out-of-plane energy absorption by 89.47% without altering the specific energy absorption of aramid honeycomb, maintaining smooth plastic deformation. At 150 °C, it retained 90.7% of mechanical properties. In the in-plane direction, PF raised plateau stress by 798.73%. The study identified the critical spinodal for off-axis angle deformation modes and established a theoretical relationship between PFAH strength and off-axis angle, demonstrating superior resistance to shallow-angle oblique loading compared to unfilled honeycomb.

Vertical z-axis discontinuous carbon fibers for improved lightning strike performance of continuous fiber-reinforced polymer composites

Effective lightning strike protection for critical aerospace and wind applications requires high electrical conductivity to dissipate current efficiently. However, polymer matrix composites face a challenge due to their inherently insulating nature. While conventional carbon fiber-reinforced composites (CFRP) exhibit electrical conductivity in the planar direction, achieving through-thickness conductivity remains an ongoing challenge. In this work, we have undertaken the fabrication of CFRP interleaved with vertically oriented carbon fibers (Z-fiber) to impart higher electrical conductivity along the thickness direction. Two Z-fiber composite variations are prepared: Z-1 with a single layer of Z-fiber and Z-5 with five interleaved layers and compared with no Z-fiber layer (Z-0) composite. The composite panels were subjected to lab-scale lightning strike tests with a current magnitude of 100 kA. To emulate real-world service conditions, an aerospace-grade paint coating was applied to the composite laminates. Comparative analysis shows Z-1 reduces damage diameter to ∼22 mm compared to Z-0 (∼26 mm), while Z-5 exhibits the least damage (∼16.7 mm), confirmed by optical microscopy. Z-5 demonstrates nine times higher through-thickness electrical conductivity than Z-0, reducing electrical anisotropy substantially. Thermal-electric finite element damage modeling predicts surface damage within 6% of experimental values for both Z-0 and Z-5 composites. Flexural tests post-lightning reveal Z-5 retains 66% flexural strength and 86% modulus, significantly better than Z-0, which retains less than 40% for both properties. This study highlights the efficacy of Z-fiber composites in lightning strike protection, offering improved through-thickness conductivity and mechanical property retention.

Wrapped Processes on Circular Lattices for Planar Directions

Wrapped Processes on Circular Lattices for Planar Directions

The Peculiarities of Acoustic Normal Waves Propagation in Thin Porous Sheets of Thermally Expanded Graphite

Thermally expanded graphite belongs to a new class of graphite materials with unique physical, chemical and mechanical properties. Acoustic wave velocity is one of the most important characteristics for study of porous materials including thin porous sheets of thermally expanded graphite. In this paper peculiarities of symmetric mode S0 Lamb wave propagation and SH-wave with horizontal polarization in sheets of thermally expanded graphite are experimentally investigated. To determine their velocities a differential measurement scheme on the base of a low-frequency acoustic flaw detector DIO1000 LF and specialized piezoelectric transducers with dry point contact was used. Additionally the longitudinal wave velocity in direction of sheet thickness was determined using piezoelectric transducers based on polyvinylidene fluoride. Indicatrices of normal wave velocities in the rolling plane were plotted and it was shown that the maximum acoustic anisotropy is characteristic for the S0-mode. The velocity minimum corresponds to the longitudinal direction of the rolling plane in which the maximum elongation of gas pores was observed. Influence of thickness and density of thermally expanded graphite sheets on the velocities of normal waves was investigated and presence of the thickness range where the minimum velocity values were observed due to the maximum inhomogeneity of layers formed in the rolling process. Method for determination of dynamic elastic moduli of porous thermally expanded graphite sheets using experimentally measured velocities of normal waves was proposed. It was shown that in the longitudinal direction of the rolling plane the Poisson's ratio took negative values which allow to attribute the specified material to auxetics ones.

Thermal conductivity of WC: Microstructural design driven by first-principles simulations

The relationships between the microstructure and the thermal conductivity of binderless WC have been quantified, considering crystal orientation, isotopic abundance, porosity, and grain size. A significantly higher conductivity is predicted in the out-of-plane (c-axis) direction vs. the in-plane (a-axis) direction, using first principles simulations. Isotopic enrichment of the tungsten sublattice is predicted to increase conductivity, e.g., by a factor of 4–5 in the absence of boundary scattering. The results suggest that for an isotopically pure single crystal a thermal conductivity exceeding 1000 W m−1 K−1 may be achievable normal to the basal plane. The conductivity of samples with various porosities could be well fit by a minimum surface area (exponential) model, with a porosity exponent of b = 4.4. Experiment and simulation show a strong grain size dependence to conductivity below 1 µm, with a saturation beyond ∼10 µm. The experimental plateau values for κ were ∼45 % lower than those of the simulations due to deviations from perfect stoichiometry. We also find a higher scattering coefficient in the experiments, likely due to effects of grain size distribution and elongation. Our study clarifies the physical origin of disagreeing literature reports as being predominantly due to grain boundary scattering and enables microstructural design for thermally demanding environments.

Stability of Noncentrosymmetric Square Skyrmion Crystals with Easy-Axis and Easy-Plane Magnetic Anisotropy

We investigate the stability tendency of a magnetic skyrmion crystal in noncentrosymmetric tetragonal systems with the Dzyaloshinskii–Moriya interaction. We show that the stability region of the square skyrmion crystal on a square lattice depends on the Ising-type magnetic anisotropic interaction by performing the simulated annealing for the spin model. The easy-axis anisotropic interaction tends to narrow the region where the square skyrmion crystal is stabilized when the magnetic field is applied in the out-of-plane direction. In contrast, the easy-plane anisotropic interaction tends to enlarge the stability region. Meanwhile, the square skyrmion crystal induced by the easy-axis anisotropic interaction is robust compared with that induced by the easy-plane anisotropic interaction when the magnetic field is tilted from the out-of-plane to the in-plane direction. The results indicate that the instability toward the square skyrmion crystal in noncentrosymmetric crystals is sensitive to both magnetic anisotropy and magnetic fields.

Evaluation of Dose Calculation Algorithms Accuracy for ISOgray Treatment Planning System in Motorized Wedged Treatment Fields

Abstract Background: Different dose calculation methods vary in accuracy and speed. While most methods sacrifice precision for efficiency Monte Carlo (MC) simulation offers high accuracy but slower calculation. ISOgray treatment planning system (TPS) uses Clarkson, collapsed cone convolution (CCC), and fast Fourier transform (FFT) algorithms for dose distribution. This study’s primary goal is to evaluate the dose calculation accuracy for ISOgray TPS algorithms in the presence of a wedge. Methods: This study evaluates the dose calculation algorithms using the ISOgray TPS in the context of radiation therapy. The authors compare ISOgray TPS algorithms on an Elekta Compact LINAC through MC simulations. The study compares MC simulations for open and wedge fields with ISOgray algorithms by using gamma index analysis for validation. Results: The percentage depth dose results for all open and wedge fields showed a more than 98% pass rate for points. However, there were differences in the dose profile gamma index results. Open fields passed the gamma index analysis in the in-plane direction, but not all points passed in the cross-plane direction. Wedge fields passed in the cross-plane direction, but not all in the in-plane direction, except for the Clarkson algorithms. Conclusion: In all investigated algorithms, error increases in the penumbra areas, outside the field, and at cross-plane of open fields and in-plane direction of wedged fields. By increasing the wedge angle, the discrepancy between the TPS algorithms and MC simulations becomes more pronounced. This discrepancy is attributed to the increased presence of scattered photons and the variation in the delivered dose within the wedge field, consequently impacts the beam quality. While the CCC and FFT algorithms had better accuracy, the Clarkson algorithm, particularly at larger effective wedge angles, exhibited greater effectiveness than the two mentioned algorithms.

Prediction of residual stresses in additively manufactured parts using lumped capacitance and classical lamination theory

Several industries are interested in Laser Powder Bed Fusion (L-PBF) Additively Manufactured (AM) metal parts because their designs can be made arbitrarily complex while retaining bulk-type material properties. However, the residual stresses (RS) and distortions caused by the heat gradients inherent to L-PBF processes are detrimental to the structural integrity of the parts and must be taken into consideration during the part design cycle. Predicting the state of stresses in as-built 3D printed parts is a difficult problem that is typically approached with the use of transient thermomechanical Finite Element Models (FEMs). However, the nonlinearities associated with AM processes are difficult to capture in these FEMs without increasing the computational cost of the simulation, limiting their ability to be incorporated into practical design cycles. This work presents a novel analytical framework that combines lumped capacitance nonlinear heat transfer with time dependent classical lamination theory to efficiently and accurately predict RS in as-built L-PBF parts without the need of FEMs. The simulation was compared to Neutron Diffraction (ND) residual strain measurements taken at Oak Ridge National Laboratories (ORNL) as well as Synchrotron X-ray Diffraction (XRD) strain data published by the National Institute of Standards and Technology (NIST). The simulation predictions and the experimental data showed excellent agreement for the in-plane strain directions, and general agreement for the out of plane strain component, highlighting an area where further development can be implemented.

Influence of inherent anisotropy on the mechanical properties of normally consolidated clays with a wide range of plasticity indices

Inherent (fabric) anisotropy is one of the most important properties of earthen materials which has a significant influence on their strength and stiffness characteristics. In this study, a comprehensive series of unconfined and constrained compression tests is performed on normally consolidated (NC) clay samples with different plasticity indices to examine the effect of inherent anisotropy on their mechanical characteristics. Accordingly, several cylindrical clay samples with different proportions of kaolinite and bentonite are reconstituted at a wide range of deposition angles and then subjected to both unconfined and constrained compressive loadings. According to the experimental results, for a clay sample with a particular plasticity index, the highest and lowest values of the unconfined compressive strength (UCS), the secant modulus (E50), and the constrained Young's modulus (Eoed) are observed to be associated with the deposition angles of 0o and 90o, respectively. The results also show that at a certain bedding plane angle, the sample containing 30% bentonite (PI = 110%) exhibits the highest UCS, E50, and Eoed values. Several practical empirical correlations are developed to estimate the strength and stiffness properties of NC clays using their plasticity indices and bedding plane directions. Scanning Electron Microscopy (SEM) analysis is also conducted to explore the microstructure of samples containing varying percentages of kaolinite and bentonite.

Deep learning based segmentation of binder and fibers in gas diffusion layers

Gas diffusion layers (GDLs) are vital parts for the performance of proton-exchange membrane fuel cells (PEMFCs). In many cases, they are made of Carbon-Carbon Composite Paper (CCCP), which consists of carbon fibers and a carbonized binder material. The distribution of the fibers and binder in the GDL strongly influences the performance of a PEMFC. Synchrotron scans are a great way to obtain information about the microstructural composition of carbon paper GDLs (Figure 2), but there is one major obstacle. Binder and fibers tend to have the same attenuation and, consequently, the same gray values in the scans. To overcome this, we introduce a machine learning-based method that segments fibers and binder from the local morphology of a CCCP. The training data is generated using FiberGeo, a module in the GeoDict software for fibrous microstructure generation. FiberGeo creates fibers based on stochastic geometry and adds binder using morphological opening and closing operations. We applied the machine learning-based method to four Scans of samples of Toray Carbon Paper with varying amounts of binder in them. The result is the quantification of individual voxels as fiber or binder material that can be used, for example, in performance simulations of property simulations in PEMFCs [1–4]. Here, we focus on the differences in the spatial distribution of the binder both in the through-plane and in-plane directions.

Textile fabric's in-plane water permeability determination during wicking

Based on a mathematical formulation of the water flow for different wicking configurations (ascendant-horizontal and descendant), a combined ascendant, horizontal and descendant wicking experimental test was designed to provide detailed measurements of the pertinent wicking performance properties: capillary pressure and in-plane direction permeability. This method was proposed due to capillary flows found in standard vertical wicking tests as well as erroneous assumptions made in other wicking tests. The effective capillary radius was assumed to remain constant as the height of the liquid increases. This assumption would suggest that saturation, capillary pressure, and permeability are also constants. However, experiments show that these properties are only constants in the case of the descendant wicking when liquid front height is varied. The capillary pressure and permeability calculations were made using Darcy’s law and the Lucas-Washburn equation as a function of the saturation level. In the combined wicking test, conducting a horizontal wicking test allows us to calculate the effective capillary radius of a fabric as the saturation rate was found to be constant, which in turn can be used to solve for capillary pressure. That capillary pressure can then be used in a descendant wicking test, where the liquid front flow and the saturation rate remain constant, and Darcy’s law to solve for permeability. A series of experiments was conducted on cotton jersey knitting. The results showed that the ability to wick the water depends on pore size and porosity scales: macro and micropores. The in-plane water permeability was found to be directly related to the saturation rate.

Ferroelectric Polarization Enhanced Optoelectronic Synaptic Response of a CuInP2S6 Transistor Structure.

Neuromorphic computing can simulate brain function and is a pivotal element in next-generation computing, providing a potential solution to the limitations brought by the von Neumann bottleneck. Optoelectronic synaptic devices are highly promising tools for simulating biomimetic nervous systems. In this study, we developed an optoelectronic neuromorphic device with a transistor structure constructed using ferroelectric CuInP2S6. Essential synaptic behaviors in this device are observed in response to light and electrical stimuli. The optoferroelectric coupling is revealed, and the highly tunable gate modulation of the charge carrier is realized in a single device. On this basis, the light adaptation of the biological eyes and smarter Pavlovian dogs was implemented successfully and enhanced by ferroelectric polarization. The gate voltage application promotes the migration of additional Cu+ ions in the in-plane direction, thus enhancing the synaptic performance of electrical stimulation. Meanwhile, the processing ability of convolutional kernel noise images in ferroelectric devices has been achieved. Our results offer the important observation and application of ferroelectric polarization-enhanced synaptic properties of a transistor structure and have great potential in promoting the development of two-dimensional van der Waals materials and devices.

A LiDAR SLAM Algorithm Considering Dynamic Extraction of Feature Points in Underground Coal Mine

Abstract. To address the absence of GNSS signals in underground coal mines and the susceptibility of mainstream LiDAR SLAM to degradation due to insufficient feature constraints, this paper proposes a tightly-coupled SLAM algorithm incorporating LiDAR and IMU for use in such environments. The paper initially introduces a dynamic feature point extraction strategy, where the number of corner feature points can be dynamically adjusted based on the occurrence of degradation in the underground coal mine environment. This approach constructs a constraint matrix with rich and robust feature information, enhancing pose estimation accuracy in environments with inadequate feature constraints, mitigating degradation effects, and reducing global cumulative error. Subsequently, the consistent building of the underground coal mine environment is achieved through back-end factor graph optimization. Finally, to validate the effectiveness of the method, experimental analysis is conducted in an underground coal mine. The results demonstrate that LeGO_LOAM exhibits poor robustness in underground coal mines and fails to construct a globally consistent pose estimation and map. Conversely, the pose estimation error of the proposed method in this paper is 50.93% lower in the plane direction and 42.13% lower in the elevation direction compared to LIO_SAM. This underscores the method's significance as crucial technical support for the intelligent perception and positioning of robots in underground coal mines.

Engineering of a Bio-Inspired Tiltable Oscillating Fin Submersible Thruster

Oscillating fins are devices designed to produce thrust through periodic undulating movements. However, these structures lack flexibility and often provide thrust in only one fixed direction. Observation and biological references suggest that the dorsal fin rays of seahorses can tilt longitudinally in the spine direction, changing the thrust direction. This study aims to analyze the dynamic effects of seahorse dorsal fin inclining and design a flexible bionic thruster based on this principle. Computational fluid dynamics analysis hypothesizes that fin inclination controls the net force direction in the vertical plane. A force sensor and pulley system test platform were constructed to examine the influences of wave features and the inclination angle on thrust in both vertical and horizontal directions, with discrete fin surfaces used to eliminate force interference. Force testing and snapshots indicate that wave velocity positively impacts net force magnitude, while fin inclination allows for control over force orientation. This tiltable oscillating fin thruster possesses more degrees of freedom, leading to better flexibility and providing controllable thrust orientation.

Control of spin-wave polarity and velocity using a ferrimagnetic domain wall

We present a theoretical study of the scattering of spin waves by a domain wall (DW) in a ferrimagnetic (FiM) spin chain in which two sublattices carry spins of unequal magnitudes. We find that a narrow but atomically smooth FiM DW exhibits a different behavior in comparison with similarly smooth ferromagnetic and antiferromagnetic DWs due to the inequivalence of the two sublattices. Specifically, for sufficiently weak anisotropy, the smaller spin at the center of the DW is found to become precisely normal to the easy axis, selecting an arbitrary direction in the xy plane and thereby breaking the U(1) spin-rotational symmetry spontaneously. This particular form of a FiM DW does not occur in antiferromagnetic systems and is shown to lead to a strong dependence of spin-wave scattering pattern on the state of polarization of the spin wave, which can be either right-handed or left-handed, suggesting the utilization of such a narrow DW as a spin-wave filter. Moreover, we find that in the case of an atomically sharp DW, where all the spins point either up or down due to strong easy-axis anisotropy and therefore the polarization of the spin wave is conserved upon transmission, the wave vector of the spin-wave changes after passing through the DW leading to a change in the group velocity of the spin wave. This change of the wave vector indicates the acceleration or deceleration of the spin waves and thus a sharp FiM DW could serve as a spin-wave accelerator or decelerator in spintronics devices, offering a functionality absent in a ferromagnetic and an antiferromagnetic counterpart. Our results indicate that FiM spin textures can interact with spin waves distinctly from ferromagnetic and antiferromagnetic counterparts, suggesting that they may offer spin-wave functionalities that are absent in more conventional magnets. Published by the American Physical Society 2024

Fully spin-polarized two dimensional polar semi-metallic phase in Eu substituted GdI2 monolayer

Abstract The coexistence of seemingly mutually exclusive properties such as ferromagnetism, ferroelectricity and metallicity in atomically thin materials is the requirement of the hour in electronics as the Moore’s law faces an impending end. Only a few 2D multiferroic materials have been predicted/realized so far. The polar metals with simultaneous presence of polarity and conductivity are also equally rare. Here, we predict, based on first-principles calculations that an Eu-substituted rare-earth halide GdI2 monolayer showcases ferromagnetism, ferroelasticity while being polar and a fully spin-polarized semi-metal at the same time. The ferroelasticity and polarity are shown to be coupled making it possible to switch the polar direction using external mechanical stress. Further, it is observed that an application of biaxial tensile strain of 5% causes the spin easy-axis to shift from out-of-plane to in-plane direction. Thus, spin easy axis gets coupled with the direction of polarization in the strained monolayer making the switching of magnetization also possible using external strain. Simultaneous coexistence and coupling of the ferroic orders in a metallic 2D material makes the Eu substituted GdI2 monolayer an incredibly rare material for nano-electronics and spintronics applications.

Impact of thickness and saturation direction over magnetostatic mode energies and profiles in Ni80Fe20 antidots

Abstract The magnetization dynamics of square arrays of circular antidots fabricated on Si(001) substrates using deep ultraviolet lithography with a 248 nm exposing wavelength have been studied. The effects of thickness (40 nm and 80 nm) and the in-plane direction of the applied magnetic field on the magnetostatic mode energies were investigated through ferromagnetic resonance experiments and micromagnetic simulations for both thicknesses. The experimental results and the simulations allowed the determination of nature of the magnetostatic modes nature measured at angles of 0° and 45° between the applied magnetic field and the axis of the square array. Notably, in this geometry, the main modes do not disapear when the sample is rotated; instead, the localization of the modes follow the rotation of the applied field, with a variation in measured intensity directly related to the surface area occupied by the localized mode.

Effectiveness of Retraction 30 over Gross Stretch For Relieving Pectoralis Minor Tightness Among College Students

Background: The Pectoralis minor muscle originates from different 3 ribs and converges into one attachment point. Pectoralis minor shortening can contribute to many syndromes and impairments, especially at the shoulder. Some of them are impingement of the soft tissues, adhesive capsulitis etc. The prevalence of pectoralis minor tightness is very high in college-going students. The gross stretch is the stretching procedure that increases the length of the pectoralis minor muscle. This shoulder position produces tension in the muscle insertion in a posterior direction in conjunction with the scapular motion that is performed at flexion and elevation in the scapular plane, thereby lengthening the muscle. Retraction 30 is stretching with scapular retraction at 30 degrees of shoulder flexion; the flexion angle at 30 degrees can lengthen the muscle along the muscle fiber direction in the coronal plane. 30 degrees of flexion is considered to be more comfortable than a higher angle of flexion, as well as the angle is closest to the line of force Objectives of the study: To compare the effectiveness of gross stretch and retraction 30 in relieving pectoralis minor muscle tightness which can be co-operated in further treatment protocols. Study Design: Comparative Study Methodology: Two group pre–test–post–test design was used with purposive sampling. Selected subjects were allocated to two groups. Fourty subjects (20 males and 20 females) who fulfilled inclusion and exclusion criteria were recruited for the study. The independent variables are gross stretch and retraction 30 whereas the dependent variables were PMI (pectoralis minor index), pectoralis minor length test and Cervical Curvature. Result: This study results imply that retraction 30 is better when compared to gross stretch for correcting pectoralis minor tightness. Hence should be included as an inevitable part of stretching treatment. Practicing clinicians should continue to use evidence-based decisions when treating pectoralis minor tightness.

Boosting through-plane electrical conductivity: chitosan composite films with carbon-sepiolite and multiwalled carbon nanotubes

Flexible and electrically conductive materials are gaining significant attention across various domains, notably in electronics, biomedicine and food industry. One promising strategy involves the integration of electrically conductive nanostructures into a polymeric matrix to fabricate composite materials. However, achieving uniform through-plane electrical conductivity remains a challenge due to the preferential alignment of carbon nanostructures in the in-plane direction. Herein, we report the development of electrically conductive chitosan (CS)-based biocomposite films incorporating a multicomponent filler system. By combining carbon supported on sepiolite clay (CARSEP) with multiwalled carbon nanotubes (MWCNT), it is aimed to facilitate an interconnected distribution in both in-plane and through-plane directions. The optimized film, featuring a CS/CARSEP/MWCNT mass ratio of 50/40/10, exhibited a maximum electrical conductivity of 55.5 S/m and 0.1 S/m in the in-plane and through-plane directions, respectively. Additionally, migration studies demonstrated the absence of harmful compounds upon heating the film up to 60 °C in air, ethanol, or hexane. These findings highlight the potential of these flexible and electrically conductive biocomposite films, primarily composed of biobased materials, for applications requiring through-plane electrical conductivity.