Impervious Surface Area Mapping Research Articles

Using VIIRS-DNB and landsat data for impervious surface area mapping in an arid/semiarid region

ABSTRACTMapping impervious surface area (ISA) in arid/semiarid regions is of great importance because of the vulnerable ecological situation there. However, using remote sensing data for ISA mapping in arid/semiarid landscapes is still very difficult because of the complexities of ISA, such as bare soils, impervious surface areas, and sparse vegetation cover. The Visible Infrared Imaging Radiometer Suite with Day/Night Band (VIIRS-DNB) carried by the Suomi National Polar-orbiting Partnership, focusing on earth nighttime light, provides novel ways to map urban information, but is still little used in ISA mapping. In this paper, we explore a new index based on VIIRS-DNB data called the improved impervious surface index (IISI). We use a linear regression model for fractional ISA estimation in an arid/semiarid urban region, and the IISI was used as an independent variable. Reference ISAs from selected sites were mapped from Landsat images and were used as a dependent variable in this model. The results indicate that the IISI-based model provides good estimation with coefficient of determination (R2)of 0.70, much greater accuracy than that using normalized VIIRS-DNB data. This method is very valuable for fractional ISA mapping in an arid/semiarid region.

Exploring improvement of impervious surface estimation at national scale through integration of nighttime light and Proba-V data

Directly mapping impervious surface area (ISA) at national and global scales using nighttime light data is a challenge due to the complexity of land surface components and the impacts of unbalanced economic conditions. Previous research mainly used the coarse spatial resolution Defense Meteorological Satellite Program’s Operational Linescan System (DMSP OLS) and Moderate Resolution Imaging Spectroradiometer (MODIS), normalized difference vegetation index (NDVI) data for ISA mapping; the improved spatial resolution and data quality in the Suomi National Polar-orbiting Partnership, Visible Infrared Imaging Radiometer Suite’s Day/Night Band (VIIRS DNB) and in Proba-V data provide a new opportunity to accurately map ISA distribution at the national scale, which has not been explored yet. This research aimed to develop a new index – modified impervious surface index (MISI) – based on VIIRS DNB and Proba-V data to improve ISA estimation and to compare the results with those from the combination of VIIRS DNB and MODIS NDVI data. Landsat data were used to develop ISA data for the typical sites for use as reference data. Regression analysis was used to establish the ISA estimation model in which the dependent variable was from the Landsat data and the independent variable was from the MISI, as well as the previously used Large-scale Impervious Surface Index (LISI). The results indicate that the major error is from the very small or very large proportion of ISA in a unit; improvement of spatial resolution through use of higher spatial resolution nighttime light data (e.g., VIIRS DNB) or NDVI (e.g., Proba-V NDVI) data is an effective approach to improve ISA estimation. Although different indices for the combination of nighttime light and NDVI data have been used, the MISI is especially valuable for reducing the estimation errors for the regions with a small or large ISA proportion.

A Modified Normalized Difference Impervious Surface Index (MNDISI) for Automatic Urban Mapping from Landsat Imagery

Impervious surface area (ISA) is a key factor for monitoring urban environment and land development. Automatic mapping of impervious surfaces has attracted growing attention in recent years. Spectral built-up indices are considered promising to map ISA distributions due to their easy, parameter-free implementations. This study explores the potentials of impervious surface indices for ISA mapping from Landsat imagery using a case study area in Boston, USA. A modified normalized difference impervious surface index (MNDISI) is proposed, and a Gaussian-based automatic threshold selection method is used to identify the optimal MNDISI threshold for delineating impervious surfaces from background features. To evaluate its effectiveness, comparison analysis is conducted between MNDISI and the original NDISI using Landsat images from three sensors (TM/ETM+/OLI-TIRS) acquired in four seasons. Our results suggest that built-up indices are sensitive to image seasonality, and summer is the best time phase for ISA mapping. With reduced uncertainties from automatic threshold selection, the MNDISI extracts impervious surfaces from all Landsat images in summer with an overall accuracy higher than 87% and an overall Kappa coefficient higher than 0.74. The proposed method is superior to previous index-based ISA mapping from the enhanced thermal integration and automatic threshold selection. The ISA maps from the TM, ETM+ and OLI-TIRS images are not significantly different. With enlarged data pool when all Landsat sensors are considered and automation of threshold selection proposed in this study, the MNDISI could be an effective built-up index for rapid and automatic ISA mapping at regional and global scales.

Optimizing Subpixel Impervious Surface Area Mapping Through Adaptive Integration of Spectral, Phenological, and Spatial Features

Reliable subpixel impervious surface area (ISA) mapping at medium resolution is essential but difficult due to the complexity of land cover patterns within the urban/peri-urban area. In this letter, we proposed a framework to optimize subpixel ISA mapping performance with adaptive integration of features from spectral, phenological, and spatial dimensions. We utilized the recursive feature elimination to build the most discriminative feature pool. Then, the random forest (RF) model was adopted for the subpixel ISA mapping and the feature contribution quantification. We applied the proposed framework in two typical study sites and tested its utility by comparing it with three other subpixel mapping approaches. The experimental results suggested that the inclusion of complementary feature inputs beyond the spectral profile was beneficial in both study sites for identifying fractional imperviousness. In particular, the improvement was most pronounced for pixels suffering spectral variability or intra-annual land cover change. With the quantification of feature contribution to the RF model, we further illustrated the critical impact of environmental conditions on the feature adoption.

Improving Fractional Impervious Surface Mapping Performance through Combination of DMSP-OLS and MODIS NDVI Data

Impervious surface area (ISA) is an important parameter for many studies such as urban climate, urban environmental change, and air pollution; however, mapping ISA at the regional or global scale is still challenging due to the complexity of impervious surface features. The Defense Meteorological Satellite Program’s Operational Linescan System (DMSP-OLS) data have been used for ISA mapping, but high uncertainty existed due to mixed-pixel and data-saturation problems. This paper presents a new index called normalized impervious surface index (NISI), which is an integration of DMSP-OLS and Moderate Resolution Imaging Spectroradiometer (MODIS) normalized difference vegetation index (NDVI) data, in order to reduce these problems. Meanwhile, this newly developed index is compared with previously used indices—Human Settlement Index (HSI) and Vegetation Adjusted Nighttime light Urban Index (VANUI)—in ISA mapping performance. We selected China as an example to map fractional ISA distribution through a support vector regression approach based on the relationship between the index and Landsat-derived ISA data. The results indicate that the proposed NISI provided better ISA estimation accuracy than HSI and VANUI, especially when the fractional ISA in a pixel is relatively large (i.e., >0.6) or very small (i.e., <0.2). This approach can be used to rapidly update ISA datasets at regional and global scales.

Improving sub-pixel imperviousness change prediction by ensembling heterogeneous non-linear regression models

Abstract In this work nine non-linear regression models were compared for sub-pixel impervious surface area mapping from Landsat images. The comparison was done in three study areas both for accuracy of imperviousness coverage evaluation in individual points in time and accuracy of imperviousness change assessment. The performance of individual machine learning algorithms (Cubist, Random Forest, stochastic gradient boosting of regression trees, k-nearest neighbors regression, random k-nearest neighbors regression, Multivariate Adaptive Regression Splines, averaged neural networks, and support vector machines with polynomial and radial kernels) was also compared with the performance of heterogeneous model ensembles constructed from the best models trained using particular techniques. The results proved that in case of sub-pixel evaluation the most accurate prediction of change may not necessarily be based on the most accurate individual assessments. When single methods are considered, based on obtained results Cubist algorithm may be advised for Landsat based mapping of imperviousness for single dates. However, Random Forest may be endorsed when the most reliable evaluation of imperviousness change is the primary goal. It gave lower accuracies for individual assessments, but better prediction of change due to more correlated errors of individual predictions. Heterogeneous model ensembles performed for individual time points assessments at least as well as the best individual models. In case of imperviousness change assessment the ensembles always outperformed single model approaches. It means that it is possible to improve the accuracy of sub-pixel imperviousness change assessment using ensembles of heterogeneous non-linear regression models.

Enhancing endmember selection in multiple endmember spectral mixture analysis (MESMA) for urban impervious surface area mapping using spectral angle and spectral distance parameters

Successful retrieval of urban impervious surface area is achieved with remote sensing data using the multiple endmember spectral mixture analysis (MESMA). MESMA is well suited for studying the urban impervious surface area because it allows the number and types of the endmembers to vary on a per-pixel basis, thereby, allowing the control of the large spectral variability. However, MESMA must calculate all potential endmember combinations of each pixel to determine the best-fit one. Therefore, it is a time-consuming and inefficient unmixing technology, especially for hyperspectral images because these images have more complicated endmember categories. Hence, in this paper, we design an improved MESMA (SASD-MESMA: spectral angle and spectral distance MESMA) to enhance the computational efficiency of conventional MESMA, and we validate this new method by analyzing the Hyperion image (Jan-2011) and the field-spectra data of Guangzhou (China). In SASD-MESMA, the parameters of spectral angle (SA) and spectral distance (SD) are used to evaluate the similarity degree between library spectra and image spectra in order to identify the most representative endmember combination for each pixel. Results demonstrate that the SA and SD parameters are useful to reduce misjudgment in selecting candidate endmembers and effective for determining the appropriate endmembers in one pixel. Meanwhile, this research indicates that the proposed SASD-MESMA performs very well in retrieving impervious surface area, forest, grass and soil distributions on the sub-pixel level (the overall root mean square error (RMSE) is 0.15 and the correlation coefficient of determination (R2) is 0.68).

Mapping impervious surface area in the Brazilian Amazon using Landsat Imagery

Impervious surface area (ISA) is an important parameter related to environmental change and socioeconomic conditions, and has been given increasing attention in the past two decades. However, mapping ISA using remote sensing data is still a challenge due to the variety and complexity of materials comprising ISA and the limitations of remote sensing data spectral and spatial resolution. This paper examines ISA mapping with Landsat Thematic Mapper (TM) images in urban and urban–rural landscapes in the Brazilian Amazon. A fractional-based method and a per-pixel based method were used to map ISA distribution, and their results were evaluated with QuickBird images based on the 2010 Brazilian census at the sector scale of analysis for examining the mapping performance. This research showed that the fraction-based method improved the ISA estimation, especially in urban–rural frontiers and in a landscape with a small urban extent. Large errors were mainly located at the sites having ISA proportions of 0.2–0.4 in a census sector. Calibration with high spatial resolution data is valuable for improving Landsat-based ISA estimates.

Remote Sensing Sensors and Applications in Environmental Resources Mapping and Modelling.

The history of remote sensing and development of different sensors for environmental and natural resources mapping and data acquisition is reviewed and reported. Application examples in urban studies, hydrological modeling such as land-cover and floodplain mapping, fractional vegetation cover and impervious surface area mapping, surface energy flux and micro-topography correlation studies is discussed. The review also discusses the use of remotely sensed-based rainfall and potential evapotranspiration for estimating crop water requirement satisfaction index and hence provides early warning information for growers. The review is not an exhaustive application of the remote sensing techniques rather a summary of some important applications in environmental studies and modeling.