Impact Of Shock Wave Research Articles

Histopathological and ultrastructural changes in the rats brain after air shock wave impact

The using of explosive substances and devices can lead to brain injuries, the diagnosis of which requires the determination of primary biomarkers. Therefore, the aim was to establish and study histopathological and ultrastructural changes in the rats brain after exposure to an air blast wave. The study was carried out on 18 male Wistar rats, which were randomly divided into two groups: sham (n=9) and experimental (n=9). The animals of the experimental group were anesthetized with halothane and gently fixed in a horizontal position on the abdomen with the front part of the rat's muzzle at a distance of 5 cm from the device opening and subjected to an excess pressure of 26-36 kPa. Animals of both groups were decapitated, brains were removed, fixed, histopathological and ultrastructural analyzes were conducted using standard methods. Intergroup differences were assessed by Mann-Whitney U-test. Light microscopy revealed primary lesions in the form of small focal, multifocal hemorrhages, cerebral vessel ruptures and microscopic ruptures of the brain substance. In almost all brain samples, there is a significant saturation of the venous vessels with the presence of erythrocyte stasis. Violation of the blood-brain barrier, the presence of edema of the perivascular space, and petechial hemorrhages in the neuropil were registered ultrastructurally. Based on the study results, a morphological algorithm for assessing primary histostructural intracranial brain injuries and their consequences after exposure to an air shock wave was proposed. The injuries were found to be caused by the direct traumatic effect of the air shock wave. In the acute post-traumatic period, histopathological and ultrastructural changes in the brain can manifest as changes in neurons and in the blood-brain barrier and be accompanied by perivascular multifocal small-focal hemorrhages, neuropil ruptures, edema of pericellular and perivascular spaces, which together can be considered as biomarkers of primary traumatic changes after exposure to an air shock wave.

Aeroacoustic Loading of Impinging Supersonic Boundary-Layer Interaction on Statically Deformed Surfaces

This paper concerns the interaction of an impinging shock wave with a supersonic turbulent boundary layer over several distinct and permanently deformed surfaces, resulting in differences in the shock–boundary-layer interaction and the surface acoustic loading. High-order numerical simulations featuring two-dimensional surface deformations typically encountered in experiments are performed. The deformation amplitudes are up to half the incoming turbulent boundary-layer thickness. The results show that the high-pressure region about the shock impingement is significantly altered and can become narrower or wider depending on the local surface inclination of the deformed panel mode. The surface curvature is found to not significantly affect the separation and reattachment locations of the recirculation bubble. The power spectrum analysis of the pressure fluctuations along the panel’s midspan, where the surface attains the largest deformation amplitude, exhibits a rich and varied response. The pressure power spectrum is amplified in all of the surface deformation modes examined, with the magnitude of the amplification varying in the frequency domain, depending on the location and mode.

Extracorporeal shock wave therapy: options in chronic osteomyelitis (literature review)

The use of extracorporeal shock wave therapy under experimental conditions has shown the effectiveness of the method in soft tissue and skeletal infections. In vitro, an energy-dependent effect of shock waves on reducing the viability of Staphylococcus aureus and other pathogenic flora was revealed. For the manifestation of the antibacterial activity of shock waves towards pathogenic bacteria of the typical flora in chronic osteomyelitis, at least 1,000 pulses were required, and for its almost complete eradication (99 %), 4,000 pulses were applied at an energy flux density of 0.59–0.96 mJ/mm2. Most authors confirm the isolated (without antibiotics) antibacterial effect of shock waves in vitro, although there are opposite opinions. It is known that pathogenic bacteria, including Staphylococcus aureus, form protective biofilms on infected soft, bone tissues, implants. Due to this, the emerging infection is difficult to treat for a number of reasons — the biofilm prevents the penetration of antibiotics and immune cells. In vitro studies have shown that shock waves destroy biofilms of pathogenic bacteria and create conditions for a joint bactericidal effect with antibiotics. In vivo observations under the conditions of modeling experimental osteomyelitis in animals have demonstrated bacteriologically that extracorporeal shock wave therapy, when used alone, does not have an antibacterial effect, however, a lower degree of osteomyelitis was detected morphologically. The authors stated the synergism of shock waves with antibiotics in the treatment of chronic osteomyelitis in animals, up to the bactericidal effect. Studies on the impact of shock waves on biofilms of pathogenic bacteria typical for soft tissue infections, chronic osteomyelitis, both in vivo and in vitro, showed that after the application of the method, the pathogenic flora becomes susceptible to antibiotic therapy. The currently widespread opinion about the contraindication of extracorporeal shock wave therapy in the presence of infection in the body, due to the risk of exacerbation of the inflammatory process, the likelihood of bacteremia, sepsis, and foci of secondary infection, has not been confirmed in the experimental studies in vivo. Many research have shown the absence of similar or other complications in animals after the use of shock waves. The analysis of the presented data indicates the need for further study of the mechanism of extracorporeal shock wave effect on chronic osteomyelitis, possible complications associated with the use of the method, as well as its approbation in the clinic.

Experimental investigation of structural, morphological, and optical characteristics of SrTiO3 nanoparticles using a shock tube for photocatalytic applications

Abstract We investigated the role of dynamic shock waves in perovskite SrTiO3 (STO) material. XRD, FE-SEM, EDAX, FTIR, UV-DRS, XPS, and Raman spectroscopy were all used to examine the title material. When perovskite sample was loaded with shocks, its diffraction pattern did not show any crystal structure changes. The FE-SEM results suggest that the grain size increased linearly with the number of shocks. We used energy-dispersive X-ray spectroscopy to perform elemental analysis; results confirmed that SrTiO3 NPs were indeed present. Although the impulse of the shock wave changed the optical characteristics, it did not affect the molecular structure. To find the optical band gap energies of untreated and shocked NPs, Tauc plot relationships were used. The band-gap energies got smaller as the shock pulse became more substantial. The impact of shock waves caused oxygen vacancies and surface defects, lowering band gap energy. The test for photocatalytic testing showed that SrTiO3 NPs that are loaded with shock waves worked much better when they were exposed to visible light. The characteristics, including stress, strain, and bond length, were found to significantly influence photocatalytic applications. In addition, attempts were made to provide a viewpoint for future study. Overall, the objective of this research was to provide valuable insights for experts engaged in the field of SrTiO3.

Effects of herringbone riblets on shock-wave/turbulent boundary-layer interactions

In the experiment reported in this paper, a spanwise array of herringbone riblets strips is applied upstream of the interaction region between an impinging shockwave and a turbulent boundary layer developing along a flat plate boundary layer at a freestream Mach number of 1.85. High-speed schlieren photography, surface oil flow visualization and PSP are used to examine the effect of herringbone riblets on the characteristics of the shockwave-boundary layer interactions. It shows that despite that the height of the riblets is less than 2 % of the local thickness of the undisturbed boundary layer, a profound modification to the shockwave-boundary layer interaction zone is observed, and the overall size of the separation bubble is decreased. The observed control effects are attributed to the large-scale secondary flow structures produced by the directional riblets. To the best knowledge of the author, this is the first study evaluating the control effect of herringbone riblets on shock wave and turbulent boundary layer interactions in supersonic flow using the experimental method.

Acoustic shock wave-induced ordered to disordered switchable phase transitions: A case study of ferroelectric triglycine sulphate single crystal for the application of molecular switches

Highly efficient switchable materials for external stimuli have impressive applications in the development of precious sensor devices. However, most of the materials do not possess effective switchable structural features such that finding potential switchable materials is one of the critical research tasks for materials science researchers. In the present research perspective, we demonstrate successive switchable phase transitions occurring between the order to disorder states in the ferroelectric triglycine sulphate (TGS) single crystal along the (011) plane with respect to the number of shock pulses (0,1 and 2 counts) and the observed results are evaluated by the diffraction, spectroscopic, microscopic and thermal approaches. The observed switchable phase transitions occur due to the shock wave-induced inter-conversion of planar configuration to the non-planar configuration of Glycine molecules, particularly GII and GIII. The ratio of the normalized Raman bands Sym-CH2/Asym-CH2 is found to be 2.0 and 2.5 for the respective order to disorder states such that these values are identified to be well-matched with the literature reports. In addition to that, the SEM images authenticate that, during the amorphous to crystalline phase transitions, the appearance of well-defined (011) plane on the surface is ensured due to the dynamic recrystallization. To the best of our knowledge, to date, it is probably the first report for the phase switching of order to disorder states of TGS sample by the impact of acoustical shock waves and because of its efficient switchability, it can be strongly suggested for the application of molecular switches.

Acoustic shock wave-induced dynamic recrystallization of amino acids: a case study on l-serine

Herein, we report the impact of acoustic shock waves on l-serine powder samples and found significant structural and surface modifications under shocked conditions without undergoing polymorphic transition.

The impact of low-velocity shock waves on the dynamic behaviour characteristics of nanobubbles.

Low-velocity shock wave-induced contraction and expansion of nanobubbles can be applied to biocarriers and microfluidic systems. Although experiments have been conducted to study the application effects, the dynamic behavior characteristics of nanobubbles remain unexplored. In this work, we utilize molecular dynamics (MD) simulations to investigate the dynamic behavior characteristics of nanobubbles influenced by low-velocity shock waves in a liquid argon system. The DBSCAN (Density-Based Spatial Clustering of Applications with Noise) machine learning method is used to calculate the equivalent radius of nanobubbles. Two statistical methods are then utilized to predict the time series changes in the equivalent radius of nanobubbles without rebound shock waves. The piston velocity is analyzed using the bisection method to obtain the critical impact states of the nanobubble. The results show that at the low velocity shock wave (piston velocity of 0.1 km s-1), the shock wave pressure is small, the non-vacuum nanobubbles contract and expand in a circular shape, and the gas particles inside the bubble are not dispersed. In contrast, the vacuum nanobubbles collapse directly. As the shock wave rebounds upon impact, it triggers periodic contraction and expansion of the nanobubbles. The predictions indicate that the equivalent radius will vary within a small range according to the pre-predicted values in the absence of the rebound shock wave. Nanobubbles are present in four critical impact states: dispersed gaps, multiple smaller bubbles, two split bubbles, and a concave bubble.

Assessing the Effect of Chest Orientation on Pulmonary Pressure Under Free Field Shock Waves: A Numerical Analysis

Purpose This study explores how thoracic orientation affects lung pressure and injury outcomes from shock waves, building on earlier research that suggested human posture impacts injury severity. Methods A layered finite element model of the chest was constructed based on the Chinese Visual Human Dataset (CVH), which includes the rib layer and intercostal muscle layer. The dynamic response of the chest under 12 different angles oriented shock waves under incident pressures of 200kPa and 500kPa was calculated. The correspondence between lung pressure at different angles, chest wall motion velocity and lung stress, and differences in pressure/stress of lung tissue behind ribs and intercostal muscle were analyzed. Results The dynamic response of the chest can be roughly divided into four processes. High local intrapulmonary pressure areas were primarily in the anterior lobe margin and lung's central region. A 500kPa incident wave at 0° could cause slight lung injury, whereas at 240°, the pressure was non-harmful. Lung tissue pressure and stress induced by chest wall movement were significantly higher behind the intercostal muscles than behind the ribs, with a difference of about 2-3 times. Conclusions This layered model provides a cost-effective tool for large-scale shock wave impact simulations on the chest. Chest wall movement velocity strongly correlates with lung stress distribution. The significant density and sound velocity differences among ribs, intercostal muscles, and lungs cause an acoustic impedance mismatch, leading to “striped bleeding” marks in post-impact lungs. This research enhances understanding of chest and lung injury mechanisms and informs the development of protective measures.

Influence of Density Ratios on Richtmyer–Meshkov Instability with Non-Equilibrium Effects in the Reshock Process

The Richtmyer–Meshkov instability in a two-component system during the reshock process for various density ratios is studied through the discrete Boltzmann method. Detailed investigations are conducted on both hydrodynamic and thermodynamic non-equilibrium behaviors. Specifically, the analysis focuses on the density gradient, viscous stress tensor, heat flux strength, thermodynamic non-equilibrium intensity, and thermodynamic non-equilibrium area. It is interesting to observe the complex variations to non-equilibrium quantities with the changing shock front, rarefaction wave, transverse wave, and material interface. Physically, the non-equilibrium area is extended as the perturbed material interface grows after the passing of the shock wave or secondary impact. Moreover, the global non-equilibrium manifestation decreases when the transmitted shock front and transverse waves leave or when the reflected rarefaction wave weakens. Additionally, the global thermodynamic non-equilibrium effect is enhanced as the physical gradients or non-equilibrium area increase. Finally, the local non-equilibrium effect decreases when the fluid structure gradually disappears under the action of dissipation/diffusion.

Influence of shock waves on bifunctional nickel particles: Enhancing magnetic properties and supercapacitor applications

In the present study, shock-wave impact experiments were conducted to investigate the structural properties of nickel metal powder when exposed to shock waves. Both X-ray diffractometry and scanning electron microscopy were used to evaluate the structural and surface morphological changes in the shock-loaded samples. Notably, the experimental results revealed variations in lattice parameters and cell structures as a function of the number of shock pulses and the increasing volume. The transition occurred from P2 (100 shocks) to P3 (200 shocks). Remarkably, P5 (400 shocks) exhibited attempts to return to its initial state, and intriguingly, P4 displayed characteristics reminiscent of the pre-shock condition. Additionally, significant morphological changes were observed with an increase in shock pulses. Magnetic measurements revealed an increase in magnetic moment for P2, P3, and P4, but a return to the original state was observed for P5. Moreover, the capacitance exhibited an upward trend with increasing shock pulses, except for P5, where it experienced a decline. These findings underscore the significant impact of even mild shock waves on the physical and chemical characteristics of bifunctional nickel particles. This research sheds light on the potential applications of shock wave-induced structural changes in enhancing the magnetic properties and supercapacitor performance of nickel particles.

Mechanical Properties of Titanium Grade 1 After Laser Shock Wave Treatment

Abstract In the presented work the impact of a laser shock wave on the mechanical properties of a Titanium Grade 1 was investigated. Based on a series of experimental studies related to the impact of the laser shock wave on the tested material, the impact of the given treatment on the structure and mechanical properties was assessed. The influence of the environment on the distribution of plasma temperature and pressure in the material during the implementation of the laser shock wave was analyzed. The effect of the laser treatment on the structure and micromechanical properties was initially estimated on the basis of the analysis of experimental results in the form of static strength test of samples after laser treatment. A slight increase in material strength was detected with a minimal decrease in ductility. In order to comprehensively understand the observed phenomenon, a number of fractographic tests were performed, especially the analysis of the porosity of the fracture surfaces. A decrease in the porosity of the material after impact laser treatment was observed as a result of local plastic deformation.

Research on controllable shock wave technology for in-situ development of tar-rich coal

The world is rich in tar-rich coal resources, which have broad exploration and development prospects. At present, the academic community has relatively weak research on the impact of shock waves on the permeability of target coal bodies. This article focuses on the development technology of controllable shock waves in tar-rich coal reservoirs. Firstly, a systematic analysis was conducted on the drilling situation and physical parameters of the target coal seam. Secondly, the impact of shock waves on permeability of target coal was systematically analyzed. Thirdly, a systematic summary was conducted on the process parameters and measures of coal seam operations. Research has shown that: (a) The permeability of coal samples after shock wave action is much greater than the permeability of coal samples in their original state. (b) Under the same axial and confining pressure conditions, as the gas pressure increases, the increase in the permeability of coal under the action of shock waves shows a decreasing trend. (c) The shock wave generates a large number of crack structures inside the coal body. These cracks will undergo very obvious closure under external pressure. (d) Under different axial and confining pressures, when the gas pressure is 1 MPa, the maximum increase in permeability of coal samples under shock wave action can reach 90–200 times. When the gas pressure is 2 MPa, the increase in permeability before and after shock wave action is the smallest, reaching 30–90.

Investigating the impact of pulsed plasma-based shockwave technology on the characteristics of Indian crude oil

The declining production from oil wells has become a growing concern worldwide, primarily because conventional methods are becoming less efficient in extracting the original oil reserves. Due to limitations associated with traditional oil recovery techniques, including their high expenses, depth limitations, heat losses, instability of additives, and environmental hazards, it is imperative to investigate the impact of alternative technologies on reservoir fluid properties and recovery. This research proposes a pulse plasma-based shockwave technology (PPBSW) using an indigenously developed tool that uses repeated electrohydraulic shock waves. The liquid pulsed discharge's plasma channel rapidly expands causing an electrohydraulic shock wave. The crude oil samples were exposed using repeated, steep-fronted shock waves of high strength. Crude oil samples were obtained from the Indian Oilfield and underwent characterization both before and after exposure to shockwaves. After the shockwave treatment, there were observable changes in the weight percentages of wax, saturates, aromatics, resins, and asphaltenes in the composition of the oil. C13 NMR investigations reveals that MCL (mean chain length) of the exposed samples was slightly affected. Further, the impact of shock wave on the viscosity of the crude oil was evaluated and viscosity of the samples found to be altered after exposure. Oil recovery was evaluated using core flooding studies on a saturated Berea sandstone core. The core was saturated using core plug saturator at 1000 psi. As a result of altered viscosity and reduced interactions between the rock and fluid, the oil recovery from the treated samples was approximately 24% greater as compared to the untreated samples. Given the oil recovery and mixed effect on the viscosity of studied crude oil samples, it can be inferred that PPBSW has a favourable effect on the hydrocarbon recovery.

Enhancement of lean blowout limits of swirl stabilized NH3-CH4-Air flames using nanosecond repetitively pulsed discharges at elevated pressures

This study experimentally examines the impact of nanosecond repetitively pulsed (NRP) discharges on lean premixed methane-ammonia-air swirl flames at pressures up to 4 bar. The results reveal the extension of flame blowout limit by 10–12 % under atmospheric conditions and 5–6 % at 4 bar, when NRP discharges are applied. This decrease in the plasma effect could be attributed to the detrimental impact of strong shock waves at high pressure, destabilizing the flame. NH3-CH4-air flames shows higher lean blowout limits in comparison to CH4-air flames. NRP discharges exhibit consistent impact on the lean blowout limit enhancement across ammonia fractions (20–60 %), irrespective of pressure conditions. These results are obtained for a ratio of NRP discharge power to flame thermal power of 0.63 % and constant pulse repetition frequency of 30 kHz.

Fiber metal laminates for high strain rate applications with layerwise shock impedance tuning

Novel materials such as fiber-metal laminates (FMLs) have demonstrated significant potential in a variety of applications. They must contend with problems such fatigue, creep, high-speed projectile impact, and deformation at high strain rates while in use. When employed as structural materials in aircraft, especially when exposed to shock wave impact and high velocity impact, fiber-metal laminates’ high strain rate characteristics become crucial. Shock impedance matching is a revolutionary approach used for shock-tuning the separate layers. The novelty of the current work is in developing custom shielding laminates, with in-depth analysis on the response of the shock impedance tuning of individual layers on the laminate behaviour at high strain rates. In the current study, five stackups of FMLs comprising metallic (AA 6061-T6) and fiber-reinforced polymer (FRP) plies, were formulated, incorporating shock impedance matching. The fiber-polymer plies used in the FMLs include ultra-high molecular weight polyethylene (UHMWPE), p-aramid for supplementing the impact resistance. Transmission loss functions (TL) estimated from the impedance tube experiments were used to indicate the shock tuning of the various laminates. The laminates underwent testing using a Split Hopkinson Pressure Bar (SHPB) apparatus to determine their properties at high strain rates (350, textrm{s}^{-1} to 460, textrm{s}^{-1}). The variation in the Shock Energy (SE) absorbed by the laminates at various strain rates was analyzed as a function of the corresponding Transmission Loss employing regression. The dynamic stress-strain curves showed an increase in shock energy absorption at higher strain rates. The sequence SSP-IV and SSP-II showed the highest values of energy absorption as well as Transmission Loss.

Impact Of Shock Waves on Structural and Optical Properties of Li2so4.H2o Doped L-Alanine Single Crystals for High Pressure and Temperature Applications

The current study discusses the impact of shock wave of Mach number 1.7 on structural, molecular and optical properties of Li2SO4.H2O doped L-Alanine single crystals. PXRD, Raman spectral results confirm that the test crystal does not undergo any crystallographic phase transitions and conformational transitions against the shock wave. Optical micrographs and UV-Visible analysis communicate the subtle morphological changes and optical properties which is not significantly changed by shock wave. The results of crystallographic studies provide the strong proof that the crystal has molecular stability and a stable crystallographic structure against the impact of applied shock waves and suitable for a wide range of uses in aerospace applications.

Shock wave induced order to disorder type phase transition of cobalt chloride hexahydrate doped l-histidine hydrochloride monohydrate single crystal

The impact of supersonic shock waves upon materials is one of the fascinating areas of active research in material science. Phase transition behaviour of materials, when subjected to shock waves, is also of great interest in this field. In the present investigation, we have proved the impact of shock wave-induced order–disorder type phase transition of cobalt chloride hexahydrate doped L-histidine hydrochloride monohydrate single crystal. The test crystal was subjected to the corresponding shock pulse counts of 0, 1, 2, 3, and 4 with Mach number 1.7 until the third shock condition, there wasn't a phase change; however, in the fourth shocked condition, there was a phase transition of the order–disorder type noted. X-ray diffractometry, Raman spectroscopy, and UV–Visible spectroscopy are three different analytical techniques that have been used to confirm the aforementioned phase transitions. The order–disorder phase transition enables the investigation of novel aspects of a material's structural properties. The grown crystal had reacted to shock wave exposure in terms of the type of phase transition order–disorder.

Shock wave mitigation and impact resistance response of kevlar fabric with novel shear-stiffening gel core

A novel shear thickening gel with micro-scale hard/soft interface structure and low reaction temperature was proposed in this article. The gel was named TH and used as core material within Kevlar fabrics. Storage modulus of TH was proved to increase by around two orders with increasing of shear frequency, and dynamic properties indicated that TH could dissipate or store more energy. TH can adhere with Kevlar fabrics well and satisfactorily fulfill the gap between fabrics. As a result, shock wave peak pressure and positive impulse decreased markedly. Wavelet decomposition analysis show that high frequency energy was filtered by protection materials. Meanwhile, impact resistance test suggested the existence of TH changed the stress propagation routes and avoided pulling out for Kevlar fabrics. Samples filled with TH demonstrated a better shock wave mitigation ability and impact resistance. Energy dissipation structures with TH have a promising prospect in the application of defending area.

Formation of Australasian tektites from gravity and magnetic indicators

The parent impact crater of Australasian tektites has not been discovered so far, but a consensus has been accepted on its location in a wider area of Indochina. Recently, an alternative location has been suggested in the Badain Jaran Desert (BJD), Northwest China. Employing gravity and magnetic data derived from satellites, possible presence of an impact structure in BJD is investigated. The gravity parameters include the free air gravity disturbance, its vertical derivative component and total horizontal gradient (THG), strike alignment (SA), and Bouguer anomaly with its first vertical derivative and tilt angle. The magnetic parameters include the anomalous total magnetic field (TMF), its reduced to the pole transformation (RTP), the first vertical derivative of the TMF vertical component (Bzz), tilt angle (TA), and logistic total horizontal gradient (LTHG). Both the gravity and magnetic indicators support the presence of the impact structure. Gravity parameters display typical annular gravity highs circumscribing a gravity low. SA analysis reveals preferred parallel directions, implying the susceptibility of special zones to the impact shock waves, both within and beyond the rim. TMF reveals a large magnetic anomaly in the southern part of the proposed crater, and RTP displaces and restricts it further into the rim. Bzz weakens the long wavelength anomalies, amplifies the superficial ones, and separates them horizontally. TA and LTHG delineate the deep-seated and shallow magnetic signals related to the peak and border magnetization, respectively.