Icosahedral Particles Research Articles

HBV maintains electrostatic homeostasis by modulating negative charges from phosphoserine and encapsidated nucleic acids.

Capsid assembly and stability of hepatitis B virus (HBV) core protein (HBc) particles depend on balanced electrostatic interactions between encapsidated nucleic acids and an arginine-rich domain (ARD) of HBc in the capsid interior. Arginine-deficient ARD mutants preferentially encapsidated spliced viral RNA and shorter DNA, which can be fully or partially rescued by reducing the negative charges from acidic residues or serine phosphorylation of HBc, dose-dependently. Similarly, empty capsids without RNA encapsidation can be generated by ARD hyper-phosphorylation in insect, bacteria, and human hepatocytes. De-phosphorylation of empty capsids by phosphatase induced capsid disassembly. Empty capsids can convert into RNA-containing capsids by increasing HBc serine de-phosphorylation. In an HBV replicon system, we observed a reciprocal relationship between viral and non-viral RNA encapsidation, suggesting both non-viral RNA and serine-phosphorylation could serve as a charge balance buffer in maintaining electrostatic homeostasis. In addition, by comparing the biochemistry assay results between a replicon and a non-replicon system, we observed a correlation between HBc de-phosphorylation and viral replication. Balanced electrostatic interactions may be important to other icosahedral particles in nature.

Imaging and Quantitation of a Succession of Transient Intermediates Reveal the Reversible Self-Assembly Pathway of a Simple Icosahedral Virus Capsid.

Understanding the fundamental principles underlying supramolecular self-assembly may facilitate many developments, from novel antivirals to self-organized nanodevices. Icosahedral virus particles constitute paradigms to study self-assembly using a combination of theory and experiment. Unfortunately, assembly pathways of the structurally simplest virus capsids, those more accessible to detailed theoretical studies, have been difficult to study experimentally. We have enabled the in vitro self-assembly under close to physiological conditions of one of the simplest virus particles known, the minute virus of mice (MVM) capsid, and experimentally analyzed its pathways of assembly and disassembly. A combination of electron microscopy and high-resolution atomic force microscopy was used to structurally characterize and quantify a succession of transient assembly and disassembly intermediates. The results provided an experiment-based model for the reversible self-assembly pathway of a most simple (T = 1) icosahedral protein shell. During assembly, trimeric capsid building blocks are sequentially added to the growing capsid, with pentamers of building blocks and incomplete capsids missing one building block as conspicuous intermediates. This study provided experimental verification of many features of self-assembly of a simple T = 1 capsid predicted by molecular dynamics simulations. It also demonstrated atomic force microscopy imaging and automated analysis, in combination with electron microscopy, as a powerful single-particle approach to characterize at high resolution and quantify transient intermediates during supramolecular self-assembly/disassembly reactions. Finally, the efficient in vitro self-assembly achieved for the oncotropic, cell nucleus-targeted MVM capsid may facilitate its development as a drug-encapsidating nanoparticle for anticancer targeted drug delivery.

Ultrastructure and Viral Metagenome of Bacteriophages from an Anaerobic Methane Oxidizing Methylomirabilis Bioreactor Enrichment Culture.

With its capacity for anaerobic methane oxidation and denitrification, the bacterium Methylomirabilis oxyfera plays an important role in natural ecosystems. Its unique physiology can be exploited for more sustainable wastewater treatment technologies. However, operational stability of full-scale bioreactors can experience setbacks due to, for example, bacteriophage blooms. By shaping microbial communities through mortality, horizontal gene transfer, and metabolic reprogramming, bacteriophages are important players in most ecosystems. Here, we analyzed an infected Methylomirabilis sp. bioreactor enrichment culture using (advanced) electron microscopy, viral metagenomics and bioinformatics. Electron micrographs revealed four different viral morphotypes, one of which was observed to infect Methylomirabilis cells. The infected cells contained densely packed ~55 nm icosahedral bacteriophage particles with a putative internal membrane. Various stages of virion assembly were observed. Moreover, during the bacteriophage replication, the host cytoplasmic membrane appeared extremely patchy, which suggests that the bacteriophages may use host bacterial lipids to build their own putative internal membrane. The viral metagenome contained 1.87 million base pairs of assembled viral sequences, from which five putative complete viral genomes were assembled and manually annotated. Using bioinformatics analyses, we could not identify which viral genome belonged to the Methylomirabilis- infecting bacteriophage, in part because the obtained viral genome sequences were novel and unique to this reactor system. Taken together these results show that new bacteriophages can be detected in anaerobic cultivation systems and that the effect of bacteriophages on the microbial community in these systems is a topic for further study.

Microstructure and Mechanical Properties of Squeeze Casting Quasicrystal Reinforced AZ91D Magnesium Matrix Composites

To improve the mechanical properties of AZ91D alloy, a squeeze casting process was employed to fabricate AZ91D magnesium matrix composites reinforced with stable icosahedral quasicrystal particles which were introduced as Mg-Zn-Y quasicrystal master alloy. The effects of quasicrystal master alloy content on the microstructure and mechanical properties of the composites were investigated. The results show that the squeeze casting process is an effective method to refine grain size. The composites comprise α -Mg matrix, α -Mg 17 Al 12 phases that disperse on grain boundaries and Mg 3 Zn 6 Y quasicrystal particles. A stable interface between the quasicrystal particles and the Mg matrix is observed. The composite exhibits the maximum ultimate tensile strength of 194.3 MPa and the maximum elongation of 9.2%, when the mass fraction of quasicrystal master alloy is 5%. The reinforcement mechanism is concluded as fine-grain strengthening and quasicrystal particle strengthening.

Ab initio phasing by molecular averaging in real space with new criteria: application to structure determination of a betanodavirus.

Molecular averaging, including noncrystallographic symmetry (NCS) averaging, is a powerful method for ab initio phase determination and phase improvement. Applications of the cross-crystal averaging (CCA) method have been shown to be effective for phase improvement after initial phasing by molecular replacement, isomorphous replacement, anomalous dispersion or combinations of these methods. Here, a two-step process for phase determination in the X-ray structural analysis of a new coat protein from a betanodavirus, Grouper nervous necrosis virus, is described in detail. The first step is ab initio structure determination of the T = 3 icosahedral virus-like particle using NCS averaging (NCSA). The second step involves structure determination of the protrusion domain of the viral molecule using cross-crystal averaging. In this method, molecular averaging and solvent flattening constrain the electron density in real space. To quantify these constraints, a new, simple and general indicator, free fraction (ff), is introduced, where ff is defined as the ratio of the volume of the electron density that is freely changed to the total volume of the crystal unit cell. This indicator is useful and effective to evaluate the strengths of both NCSA and CCA. Under the condition that a mask (envelope) covers the target molecule well, an ff value of less than 0.1, as a new rule of thumb, gives sufficient phasing power for the successful construction of new structures.

Design of a hyperstable 60-subunit protein dodecahedron. [corrected

The icosahedron and the dodecahedron are the largest of the Platonic solids, and icosahedral protein structures are widely utilized in biological systems for packaging and transport1,2. There has been considerable interest in repurposing such structures3–5, for example, virus-like particles for the targeted delivery and vaccine design. The ability to design proteins that self assemble into precisely specified, highly ordered icosahedral structures would open the door to a new generation of protein 'containers' that could exhibit properties custom-made for various applications. In this manuscript, we describe the computational design of an icosahedral nano-cage that self-assembles from trimeric building blocks. Electron microscopy images of the designed protein expressed in E. coli reveals a homogenous population of icosahedral particles nearly identical to the design model. The particles are stable in 6.7 M guanidine hydrochloride at up to 80 °C, and undergo extremely abrupt, but reversible, disassembly between 2 M and 2.25 M guanidinium thiocyanate. The icosahedron is robust to genetic fusions: one or two copies of superfolder GFP can be fused to each of the 60 subunits to create highly fluorescent standard candles for light microscopy, and a designed protein pentamer can be placed in the center of each of the twenty pentameric faces to potentially gate macromolecule access to the nanocage interior. Such robust designed nanocages should have considerable utility for targeted drug delivery6, vaccine design7, and synthetic biology8.

Isolation and preliminary characterization of a new pathogenic iridovirus from redclaw crayfish Cherax quadricarinatus.

We report the preliminary characterization of a new iridovirus detected in diseased Cherax quadricarinatus collected from a farm in Fujian, China. Transmission electron microscopy identified numerous icosahedral particles (~150 nm in diameter) in the cytoplasm and budding from the plasma membrane of hematopoietic tissue cells. SDS-PAGE of virions semi-purified from the hemolymph of moribund C. quadricarinatus identified 24 proteins including a 50 kDa major capsid protein (MCP). By summing the sizes of DNA restriction endonuclease fragments, the viral genome was estimated to be ~150 kb in length. A 34 amino acid sequence deduced from a 103 bp MCP gene region amplified by PCR using degenerate primers targeted to MCP gene regions conserved among iridoviruses and chloriridoviruses was most similar (55% identity) to Sergestid iridovirus. Based on virion morphology, protein composition, DNA genome length, and MCP sequence relatedness, the virus identified has tentatively been named Cherax quadricarinatus iridovirus (CQIV). In addition, experimental infection of healthy C. quadricarinatus, Procambarus clarkii, and Litopenaeus vannamei with CQIV caused the same disease and high mortality, suggesting that CQIV poses a potential threat to cultured and wild crayfish and shrimp.

Draft Genome Sequence of Tokyovirus, a Member of the Family Marseilleviridae Isolated from the Arakawa River of Tokyo, Japan.

Members of the Marseilleviridae family are large DNA viruses with icosahedral particles that infect Acanthamoeba cells. This report presents a new Marseilleviridae family member discovered in a water/soil sample from a river in Tokyo, named Tokyovirus, with genome size of 370 to 380 kb.

Fatigue properties and microstructure of quasicrystalline AlFeCrTi alloy

Aluminium based material having chemical composition of Al93Fe3Ti2Cr2 (at.%) was prepared by hot extrusion of gas atomised powder. Microstructure consisting of aluminium matrix and icosahedral quasicrystalline particles was investigated by scanning and transmission electron microscopy a X-ray spectroscopy. Size, distribution and inner structure of quasicrystalline particles were determined. When quasicrystalline particles having submicron size were present in the microstructure together with fine-grained aluminium matrix, it resulted in enhancement of mechanical properties. Fatigue experiments were performed in load controlled regime with positive mean stress and fatigue life data for this quasicrystalline material were compared with similar results for commercially available aluminium alloys. Longer fatigue life together with higher fatigue strength reaching value of 350MPa was observed. It is approx. 100MPa higher than for commercially produced coarse-grained aluminium alloys. Fractographic observations revealed presence of fish eye fracture patterns and validity of weakest link fracture mechanism acting in this type of material under investigation.

Functional Metallic Materials with Fragmented Structure and Developed Surface

The physicochemical foundations of fabrication of functional materials with faulted structure and developed surface are considered for copper as an example. Methods for increasing the specific surface of icosahedral particles and their layers are suggested. An original method for creating developed surface for metallic particles, crystals, layers, coatings and massive materials from them is suggested and proved experimentally.

A review of geminivirus diseases in vegetables and other crops in Brazil: current status and approaches for management

ABSTRACT: Insect-transmitted viruses cause some of the most damaging and economically important diseases of crop plants, especially in tropical and subtropical regions. The geminiviruses, a group of single-stranded DNA viruses with unique twined icosahedral virus particles, are responsible for many of these diseases. Of particular importance are the geminiviruses transmitted by whiteflies (Bemisia tabaci), which are in the genus Begomovirus. This is the largest genus of plant viruses (in terms of number of species), and some are responsible for many devastating diseases in vegetable and fiber crops throughout the world. This review presents the current understanding of begomoviruses, the diseases they cause, and approaches for disease management. An emphasis is placed on the most important begomovirus diseases in Brazil, which are those that affect common bean and tomato. However, because of the wide host range of the vector and the genetic flexibility of begomoviruses, these diseases pose a threat to many other crops. Therefore, the current situation with begomoviruses that infect okra, pepper, potato, sweetpotato and soybean in Brazil is also discussed.

Virus-associated papillomatous skin lesions in a giant guitarfish Rhynchobatus djiddensis: a case report.

Although elasmobranch species are increasingly displayed in public aquaria, knowledge of disease in wild and captive elasmobranchs, as well as the agents involved, remains limited, and descriptions are often incomplete. This report describes papillomatous skin lesions in a juvenile giant guitarfish Rhynchobatus djiddensis associated with intranuclear viral particles. Skin biopsies were collected from multiple, friable, raised, villonodular skin lesions affecting pigmented and non-pigmented skin of the caudal fin and ventrum, respectively. Microscopic examination revealed papillary proliferation of the epidermis, with widespread marked karyomegaly of squamous epithelial cells. In approximately 75% of nuclei, chromatin was marginated by one to multiple, large, amphophilic inclusions. Large numbers of unencapsulated, 75 nm, icosahedral viral particles were observed to form large arrays in affected nuclei using transmission electron microscopy. Based on intranuclear location, particle size and morphology, a consensus nested-PCR for adenovirus polymerase was attempted. However, no adenoviral gene sequence was amplified. The nature of the involved virus remains unknown and an ongoing area of investigation. Lesions regressed completely over a 6 mo period, during which time the animal showed no signs of systemic illness, and there has been no recrudescence for 6 mo following resolution. Two cohorts of similar age and in close contact with the case animal were unaffected.

Morphological and Taxonomic Properties of Tokyovirus, the First Marseilleviridae Member Isolated from Japan.

Members of the Marseilleviridae family are large DNA viruses with icosahedral particle structures that infect Acanthamoeba cells. The first Marseillevirus to be discovered was isolated in 2009. Since then, several other members of the Marseilleviridae family have been reported, including Lausannevirus, Senegalvirus, Cannes 8 virus, Insectomime virus, Tunisvirus, Melbournevirus, Port-Miou virus, and Brazilian Marseillevirus, which have been isolated from Europe, Africa, Australia, and South America. The morphological and genomic properties of a new Marseilleviridae family member, Tokyovirus, discovered in a water/soil sample from a Japanese river in Tokyo, were described in the present study. Tokyovirus possesses icosahedral particles of up to 200 nm in diameter, as revealed by a transmission electron microscopy (TEM) analysis, which form a giant virion factory in Acanthamoeba cells. A preliminary genome analysis predicted 487 coding sequences. A dot plot analysis and phylogenetic analysis using family B DNA polymerase, proliferating cell nuclear antigen (PCNA), and DNA-directed RNA polymerase alpha subunit genes revealed that Tokyovirus shares similarities with Marseillevirus, Melbournevirus, and Cannes 8 virus (Marseilleviridae subclade A), but not with Lausannevirus and Port-Miou virus (subclade B), Tunisvirus and Insectomime virus (subclade C), or Brazilian Marseillevirus (subclade D), suggesting that Tokyovirus has evolved separately from the previously described Marseilleviridae members.

Faceted particles formed by the frustrated packing of anisotropic colloids on curved surfaces.

We use computer simulations and simple theoretical models to analyze the morphologies that result when rod-like particles end-attach onto a curved surface, creating a finite-thickness monolayer aligned with the surface normal. This geometry leads to two forms of frustration, one associated with the incompatibility of hexagonal order on surfaces with Gaussian curvature, and the second reflecting the deformation of a layer with finite thickness on a surface with non-zero mean curvature. We show that the latter effect leads to a faceting mechanism. Above threshold values of inter-particle attraction strength and surface mean curvature, the adsorbed layer undergoes a transition from orientational disorder to an ordered state that is demarcated by reproducible patterns of line defects. The number of facets is controlled by the competition between line defect energy and intra-facet strain. Tuning control parameters thus leads to a rich variety of morphologies, including icosahedral particles and irregular polyhedra. In addition to suggesting a new strategy for the synthesis of aspherical particles with tunable symmetries, our results may shed light on recent experiments in which rod-like HIV GAG proteins assemble around nanoscale particles.

The Generation of Turnip Crinkle Virus-Like Particles in Plants by the Transient Expression of Wild-Type and Modified Forms of Its Coat Protein.

Turnip crinkle virus (TCV), a member of the genus carmovirus of the Tombusviridae family, has a genome consisting of a single positive-sense RNA molecule that is encapsidated in an icosahedral particle composed of 180 copies of a single type of coat protein. We have employed the CPMV-HT transient expression system to investigate the formation of TCV-like particles following the expression of the wild-type coat protein or modified forms of it that contain either deletions and/or additions. Transient expression of the coat protein in plants results in the formation of capsid structures that morphologically resemble TCV virions (T = 3 structure) but encapsidate heterogeneous cellular RNAs, rather than the specific TCV coat protein messenger RNA. Expression of an amino-terminal deleted form of the coat protein resulted in the formation of smaller T = 1 structures that are free of RNA. The possibility of utilizing TCV as a carrier for the presentation of foreign proteins on the particle surface was also explored by fusing the sequence of GFP to the C-terminus of the coat protein. The expression of coat protein-GFP hybrids permitted the formation of VLPs but the yield of particles is diminished compared to the yield obtained with unmodified coat protein. Our results confirm the importance of the N-terminus of the coat protein for the encapsidation of RNA and show that the coat protein's exterior P domain plays a key role in particle formation.

Antigenic and Cryo-Electron Microscopy Structure Analysis of a Chimeric Sapovirus Capsid.

The capsid protein (VP1) of all caliciviruses forms an icosahedral particle with two principal domains, shell (S) and protruding (P) domains, which are connected via a flexible hinge region. The S domain forms a scaffold surrounding the nucleic acid, while the P domains form a homodimer that interacts with receptors. The P domain is further subdivided into two subdomains, termed P1 and P2. The P2 subdomain is likely an insertion in the P1 subdomain; consequently, the P domain is divided into the P1-1, P2, and P1-2 subdomains. In order to investigate capsid antigenicity, N-terminal (N-term)/S/P1-1 and P2/P1-2 were switched between two sapovirus genotypes GI.1 and GI.5. The chimeric VP1 constructs were expressed in insect cells and were shown to self-assemble into virus-like particles (VLPs) morphologically similar to the parental VLPs. Interestingly, the chimeric VLPs had higher levels of cross-reactivities to heterogeneous antisera than the parental VLPs. In order to better understand the antigenicity from a structural perspective, we determined an intermediate-resolution (8.5-Å) cryo-electron microscopy (cryo-EM) structure of a chimeric VLP and developed a VP1 homology model. The cryo-EM structure revealed that the P domain dimers were raised slightly (∼5 Å) above the S domain. The VP1 homology model allowed us predict the S domain (67-229) and P1-1 (229-280), P2 (281-447), and P1-2 (448-567) subdomains. Our results suggested that the raised P dimers might expose immunoreactive S/P1-1 subdomain epitopes. Consequently, the higher levels of cross-reactivities with the chimeric VLPs resulted from a combination of GI.1 and GI.5 epitopes. We developed sapovirus chimeric VP1 constructs and produced the chimeric VLPs in insect cells. We found that both chimeric VLPs had a higher level of cross-reactivity against heterogeneous VLP antisera than the parental VLPs. The cryo-EM structure of one chimeric VLP (Yokote/Mc114) was solved to 8.5-Å resolution. A homology model of the VP1 indicated for the first time the putative S and P (P1-1, P2, and P1-2) domains. The overall structure of Yokote/Mc114 contained features common among other caliciviruses. We showed that the P2 subdomain was mainly involved in the homodimeric interface, whereas a large gap between the P1 subdomains had fewer interactions.

Preparation of materials with a developed surface by thermal treatment and chemical etching of electrodeposited icosahedral small copper particles

The preparation of materials with a developed surface by changing the morphology of electrolytic icosahedral small copper particles was described. At first, icosahedral small copper particles were electrodeposited from an electrolyte solution to a metal support, and then the support with the deposited metal was thermally treated and chemically etched; as a result, the specific surface area of particles and coatings significantly increased.

Characterization of cymbidium chlorotic mosaic virus from cymbidium tortisepalum in China

The complete nucleotide sequence of isolate YN of the putative sobemovirus Cymbidium chlorotic mosaic virus (CyCMV) from Cymbidium tortisepalum plants showing chlorotic and necrotic spots in Yunnan province (southwest China) was determined by deep sequencing. Dips from symptomatic leaves showed that this virus has icosahedral particles ca. 30 nm in diameter. The viral genome is a positive-strand RNA molecule 4,081 nt in size (GenBank accession No. KR996515) encoding four open reading frames with an organization similar to that described for sobemoviruses. The complete sequence of CyCMV-YN shares 89.5% identity at the nucleotide level with that of CyCMV-JP isolated from Cymbidium goeringii in Japan. This is the first report of a sobemovirus infecting orchid in China.

Isolation of a novel polyomavirus, related to Japanese eel endothelial cell-infecting virus, from marbled eels, Anguilla marmorata (Quoy & Gaimard).

Marbled eels, Anguilla marmorata (Quoy & Gaimard), cultured in Taiwan exhibited haemorrhage and mortality in January 2012. The severely diseased eels bled from the gills and showed congestion of the central venous sinus of the gill filaments and haemorrhage throughout the body similar to viral endothelial cell necrosis of eel. In this study, a novel polyomavirus (AmPyV) was isolated from the diseased eels using the AMPF cell line established from the pectoral fin of healthy marbled eels. AmPyV was found to encode a long T-antigen orthologous gene. Phylogenetic analysis showed that AmPyV was closely related to Japanese eel endothelial cell-infecting virus. PCR assays revealed AmPyV infection throughout the systemic organs. AmPyV proliferated in the AMPF, EK-1 and EO-2 cells at temperatures 25-30°C, and the progeny virus yields were 10(7.0) , 10(7.4) and 10(7.7) TCID50 mL(-1) , respectively. The purified virions were icosahedral particles, 70-80nm in diameter. No clinical signs or mortality was observed among the eels injected with the virus; however, the virus was reisolated from the brain, eyes, kidneys, fins and gills of infected eels 2month after injection. Our results suggest that AmPyV exhibits a latent infection. Pathogen of the disease needs to study further.

Size and structure effects of PtN (N = 12 - 13) clusters for the oxygen reduction reaction: First-principles calculations.

Size and structure effects on the oxygen reduction reaction on PtN clusters with N = 12-13 atoms have been investigated using periodic density functional theory calculations with the generalized gradient approximation. To describe the catalytic activity, we calculated the O and OH adsorption energies on the cluster surface. The oxygen binding on the 3-fold hollow sites on stable Pt12-13 cluster models resulted more favorable for the reaction with O, compared with the Pt13(Ih) and Pt55(Ih) icosahedral particles, in which O binds strongly. However, the rate-limiting step resulted in the removal of the OH species due to strong adsorptions on the vertex sites, reducing the utility of the catalyst surface. On the other hand, the active sites of Pt12-13 clusters have been localized on the edge sites. In particular, the OH adsorption on a bilayer Pt12 cluster is the closest to the optimal target; with 0.0-0.2 eV weaker than the Pt(111) surface. However, more progress is necessary to activate the vertex sites of the clusters. The d-band center of PtN clusters shows that the structural dependence plays a decisive factor in the cluster reactivity.