Ice Crystals Research Articles

Effect of magnetic fields on the structure, properties, baking performance of frozen wheat dough at different frozen stage

As an emerging physical technology, magnetic fields have been used to improve the quality of frozen and refrigerated foods. This study compared the effect of applying a static magnetic field (2 mT) at different stages of freezing and storage on the quality of frozen dough. Results suggested that the magnetic field significantly impacted frozen dough quality. It not only prevented the formation of ice crystals during the pre-freezing stage but also inhibited ice crystal growth during the following frozen storage. This effect helped to maintain the integrity of gluten proteins and their adhesion to starch granules by preventing the breakage of disulfide bonds and the depolymerization of gluten macromolecules. It was also observed that yeast inactivation and glutathione release were reduced, resulting in improved air retention and air production capacity of the dough. This, in turn, led to a more appealing volume and texture quality of the finished bread.

Relating Ocean Biogeochemistry and Low‐Level Cloud Properties Over the Southern Oceans

AbstractThere is growing evidence that marine microorganisms may influence cloud cover over the ocean through their impact on sea spray and trace gas emissions, further forming cloud droplets or ice crystals. However, evidence of a robust causal relationship based on observations is still pending. In this study, we use 4 years of multi‐instrument satellite data to segregate low‐level clouds into ice‐containing and liquid‐water clouds to obtain clear relationships between cloud types and ocean biological tracers, especially with nanophytoplankton cell abundances. Results suggest that microorganisms may be involved in compensating effects on cloud properties, increasing the frequency of occurrence of warm‐liquid clouds, and decreasing the occurrence of ice‐containing clouds in most regions during springtime. The relationships observed in most regions do not apply to the South Pacific Ocean in the 40°S–50°S latitude band. These results shed light on overlooked potential compensating effects of ocean microorganisms on cloud cover.

ANN-GA optimized composite color protectant combined with magnetic field assisted freezing: Effects on the quality of mushroom (Agaricus bisporus)

Due to their high water content, frozen mushrooms (Agaricus bisporus) were greatly affected by ice crystal formation, which can lead to the destruction of tissue structure, serious browning, high juice loss, and difficulty in maintaining good sensory characteristics. In order to improve the quality of frozen Agaricus bisporus, this study employed Artificial neural network and genetic algorithm (ANN-GA) to optimize the amount of composite color protectant, and identified the optimal freezing conditions for freezing Agaricus bisporus by determining the freezing curves under different magnetic field-assisted freezing conditions, the color variance, texture and structure, drip loss, and distribution of moisture. Furthering, using X-ray μCT three dimensional images were taken to characterize the microstructure of the samples. Among them, the 6 mT magnetic field-assisted freezing treatment group was significantly better than the control group, and the results showed that the magnetic field-assisted freezing combined with chemical color protectant as a composite processing technology improved the quality of frozen Agaricus bisporus. This provides a theoretical basis and technical support for enhanced processing of frozen Agaricus bisporus.

The impact of aerosols as ice nucleating particle on microphysics and electrification in the cumulus model

Here, a heterogeneous ice nucleation parameterization associated with aerosol acting as ice nucleating particle (INP) was implanted into a two-dimensional numerical cumulus model. To explore the impact of INP on microphysical and electrical processes, a comparison was conducted with the original approach, which employs an empirical formula. Simulation results indicate that INP greatly impacted microphysical evolution in the heterogeneous ice nucleation process, reducing total liquid precipitation amounts and causing a slight precipitation delay, as well as increasing the diameter and mixing ratio of ice crystals and the expansion of the vertical distribution of ice crystals. This led to a notable change in electrification in thunderstorms. The increase of ice crystal diameter was the dominant contributor to the enhancement of electrification using the new parameterization. Additionally, unlike the structure of thunderclouds in a mature stage, which always retains a normal dipole structure adopting the empirical formula, a tripole structure developed a lower positive charge, and the polarity inversion with upper negative and lower positive charges occurred when the new parameterization was adopted. This predominately was the result of abundant ice crystals present below the reversal temperature. The electrification characteristics of thunderstorms may have a close connection with lightning activity. It has been found that charge structure changed significantly in the two cases, with the tripolar charge structure facilitating the production of inverted intra-cloud (IC) flashes and negative Cloud-to-ground (CG) flashes simulated by the new parameterization; additionally, clouds simulated using the empirical formula may be able to develop normal IC lightning and positive CG flashes. Therefore, it will be very meaningful to obtain greater insight into the characteristics of thunderstorms electrification in cumulus model with aerosols.

Effect of freezing rates on α-amylase enzymatic susceptibility, in vitro digestibility, and technological properties of starch microparticles

The aim of this study was to evaluate the effect of freezing rates using direct (LF: Liquid nitrogen) and indirect (RF: Cryogenic refrigerator and UF: ultra-freezer) methods at temperatures of (−20, −80, and − 196 °C) on the enzymatic susceptibility with α-amylase for microparticles. In vitro digestibility parameters and technological properties were also analyzed. Lower rates resulted in larger ice crystals, damaging the starch structure. Hydrolysis was more pronounced at slower rates RF: 0.07 °C/min and UF: 0.14 °C/min, yielding maximum values of RDS: 37.63% and SDS: 59.32% for RF. Type A crystallinity remained unchanged, with only a noted increase in crystallinity of up to 6.50% for FR. Starch pastes were classified as pseudoplastic, with RF exhibiting superior textural parameters and apparent viscosity. (RF: 7.18 J g−1 and UF: 7.34 J g−1) also showed lower values of gelatinization enthalpy. Freezing techniques were viable in facilitating the diffusion of α-amylase and reducing RS by up to 81%.

Effect of fumigation height and time on cryopreservation of ram semen

The cooling rate is a crucial factor in the process of freezing semen, influencing the overall freezing effectiveness. The height and time of fumigation can significantly impact the rate of cooling. Appropriate cooling rates can help minimize the formation of ice crystals in spermatozoa and reduce potential damage to them. Therefore, the aim of this study was to evaluate the effect of different fumigation heights and time for the cryopreservation of Hu ram semen. Experiments I–IV assessed the effect of semen cryopreservation by testing the post-thawed spermatozoa total motility (TM), progressive motility (PM) and kinetic parameters fumigated at distances of 2, 4, 6 and 8 cm for durations of 5, 10, 15 and 20 min, respectively. Based on the results of experiments I to IV, experiment V evaluated the effect of semen cryopreservation by testing the post-thawed spermatozoa TM, PM, kinetic parameters, plasma membrane integrity, acrosome integrity and reactive oxygen species (ROS) level fumigated at distances of 2, 4, 6 and 8 cm for duration of 20 min. The results indicated that fumigation at 2 cm for 20 min significantly (P < 0.05) improved spermatozoa TM, PM, mean angular displacement (MAD), plasma membrane integrity and acrosome integrity compared to other groups. Additionally, it significantly (P < 0.05) reduced spermatozoa ROS level compared to the 6 and 8 cm groups. In conclusion, fumigation for 20 min at a distance of 2 cm from the liquid nitrogen surface is the most suitable cooling method for the cryopreservation of Hu ram semen.

Simulation of freezing a sea water droplet moving in a cold air

A rapid freezing of a sea water droplet moving in a cold air is modeled. A droplet freezing model is a key component needed for computational forecasting of ice accretion on surfaces of ships and other equipment operating in low-temperature regions. The freezing process consists of the three stages: 1) water cooling to the incipient solidification temperature; 2) liquid solidification; 3) further freezing of the primarily solidified droplet. An icy region, being formed during the 2nd stage, initially represents a slurry, composed of ice crystals suspended in water. Further cooling is associated with an increase in the crystal concentration that at a certain threshold causes slurry transformation into a spongy (porous) ice. The solidification stage model is composed of the three coupled differential equations formulated in the moving coordinate system. All the physical and thermophysical water properties, required for modeling droplet freezing, are calculated by using the empirical correlations. The set of the equations is solved numerically. The solidification process is illustrated by computational examples for different droplet sizes and water salinities. The computed icy region thickness vs. time, as well as temperature distributions and porosities along droplet radius at different time moments are shown.

Reversal of crystallization in cryoprotected samples by laser editing.

Advances in cryobiology techniques commonly target either the cooling or the warming cycle, while little thought has been given to ≪repair≫ protocols applicable during cold storage. In particular, crystallization is the dominant threat to cryopreserved samples but proceeds from small nuclei that are innocuous if further growth is forestalled. To this end, we propose a laser editing technique that locally heats individual crystals above their melting point by a focused nanosecond pulse, followed by amorphization during rapid resolidification. As a reference, we first apply the approach to ice crystals in cryoprotected solution and use Raman confocal mapping to study the deactivation of crystalline order. Then, we examine dimethyl sulfoxide trihydrate crystals that can germinate at low temperatures in maximally freeze concentrated regions, as commonly produced by equilibrium cooling protocols. We show how to uniquely identify this phase from Raman spectra and evidence retarded growth of laser-edited crystals during warming.

Probing the interaction between biomolecules under sub-zero temperature conditions by electrophoresis in ice grain boundaries

BackgroundPsychrophiles can survive under cryogenic conditions because of various biomolecules. These molecules interact with cells, ice crystals, and lipid bilayers to enhance their functionality. Previous studies typically measured these interactions by thawing frozen samples and conducting biological assays at room temperature; however, studying these interactions under cryogenic conditions is crucial. This is because these biomolecules can function at lower temperatures. Therefore, a platform for measuring chemical interactions under sub-zero temperature conditions must be established. ResultsThe chemical interactions between biomolecules under sub-zero temperature conditions were evaluated within ice grain boundaries with a channel-like structure, which circumvents the need for thawing. An aqueous solution of sucrose was frozen within a microfluidic channel, facilitating the formation of freeze-concentrated solutions (FCSs) that functioned as size-tunable electrophoretic fields. Avidin proteins or single-stranded DNA (ssDNA) were introduced into the FCS in advance. Probe micro/nanospheres whose surfaces were modified with molecules complementary to the target analytes were introduced into the FCS. If the targets have functionalities under sub-zero temperature conditions, they interact with complementary molecules. The chemical interactions between the target molecules and nanospheres led to the aggregation of the particles. The size tunability of the diameter of the FCS channels enabled the recognition of aggregation levels, which is indicative of interaction reactivity. The avidin–biotin interaction and ssDNA hybridization served as models for chemical interactions, demonstrating interactivity under sub-zero temperature conditions. The results presented herein suggest the potential for in situ measurement of biochemical assays in the frozen state, elucidating the functionality of bio-related macromolecules at or slightly below 0 °C. SignificanceThis is the first methodology to evaluate chemical interactions under sub-zero temperature conditions without employing the freeze-and-thaw process. This method has the advantage of revealing the chemical interactions only at low temperatures. Therefore, it can be used to screen and evaluate the functionality of cryo-related biomolecules, including cold-shock and antifreeze proteins.

Elucidation of the Role of TRPV1, VEGF-A, TXA2, Redox Homeostasis, and Inflammatory Cascades in Protection against Cold Injuries by Herbosomal-Loaded PEG-Poloxamer Topical Formulation.

High-altitude regions, cold deserts, permafrost regions, and the polar region have some of the severest cold conditions on earth and pose immense perils of cold injuries to exposed individuals. Accidental and unintended exposures to severe cold, either unintentionally or due to occupational risks, can greatly increase the risk of serious conditions including hypothermia, trench foot, and cold injuries like frostbite. Cold-induced vasoconstriction and intracellular/intravascular ice crystal formation lead to hypoxic conditions at the cellular level. The condition is exacerbated in individuals having inadequate and proper covering and layering, particularly when large area of the body are exposed to extremely cold environments. There is a paucity of preventive and therapeutic pharmacological modalities that have been explored for managing and treating cold injuries. Given this, an efficient modality that can potentiate the healing of frostbite was investigated by studying various complex pathophysiological changes that occur during severe cold injuries. In the current research, we report the effectiveness and healing properties of a standardized formulation, i.e., a herbosomal-loaded PEG-poloxamer topical formulation (n-HPTF), on frostbite. The intricate mechanistic pathways modulated by the novel formulation have been elucidated by studying the pathophysiological sequelae that occur following severe cold exposures leading to frostbite. The results indicate that n-HPTF ameliorates the outcome of frostbite, as it activates positive sensory nerves widely distributed in the epidermis transient receptor potential vanilloid 1 (TRPV1), significantly (p < 0.05) upregulates cytokeratin-14, promotes angiogenesis (VEGF-A), prominently represses the expression of thromboxane formation (TXA2), and significantly (p < 0.05) restores levels of enzymatic (glutathione reductase, superoxide dismutase, and catalase) and nonenzymatic antioxidants (glutathione). Additionally, n-HPTF attenuates oxidative stress and the expression of inflammatory proteins PGF-2α, NFκB-p65, TNF-α, IL-6, IL-1β, malondialdehyde (MDA), advanced oxidative protein products (AOPP), and protein carbonylation (PCO). Masson's Trichrome staining showed that n-HPTF stimulates cellular proliferation, and increases collagen fiber deposition, which significantly (p < 0.05) promotes the healing of frostbitten tissue, as compared to control. We conclude that protection against severe cold injuries by n-HPTF is mediated via modulation of pathways involving TRPV1, VEGF-A, TXA2, redox homeostasis, and inflammatory cascades. The study is likely to have widespread implications for the prophylaxis and management of moderate-to-severe frostbite conditions.

Liquid–liquid transition and ice crystallization in a machine-learned coarse-grained water model

Mounting experimental evidence supports the existence of a liquid-liquid transition (LLT) in high-pressure supercooled water. However, fast crystallization of supercooled water has impeded identification of the LLT line TLL(p) in experiments. While the most accurate all-atom (AA) water models display a LLT, their computational cost limits investigations of its interplay with ice formation. Coarse-grained (CG) models provide over 100-fold computational efficiency gain over AA models, enabling the study of water crystallization, but have not yet shown to have a LLT. Here, we demonstrate that the CG machine-learned water model Machine-Learned Bond-Order Potential (ML-BOP) has a LLT that ends in a critical point at pc = 170 ± 10 MPa and Tc = 181 ± 3 K. The TLL(p) of ML-BOP is almost identical to the one of TIP4P/2005, adding to the similarity in the equation of state of liquid water in both models. Cooling simulations reveal that ice crystallization is fastest at the LLT and its supercritical continuation of maximum heat capacity, supporting a mechanistic relationship between the structural transformation of water to a low-density liquid (LDL) and ice formation. We find no signature of liquid-liquid criticality in the ice crystallization temperatures. ML-BOP replicates the competition between formation of LDL and ice observed in ultrafast experiments of decompression of the high-density liquid (HDL) into the region of stability of LDL. The simulations reveal that crystallization occurs prior to the coarsening of the HDL and LDL domains, obscuring the distinction between the highly metastable first-order LLT and pronounced structural fluctuations along its supercritical continuation.

A comprehensive investigation of the use of freeze concentration appro aches for the concentration of fish protein hydrolysates

Fish protein hydrolysates (FPH) are inherently unstable in their liquid form, necessitating either freezing or dewatering for stabilization. Gentle methods such as freeze concentration can be used to remove water, this can be achieved by freezing water in solution by decreasing the bulk temperature below freezing point and separating pure ice crystals from concentrated solution. This approach serves as an alternative to techniques like evaporation and reverse osmosis for concentrating solutions that have high water content, significant nutritional value, and thermolabile compounds. This is crucial as many bioactive compounds degrade when exposed to elevated temperatures. Another notable advantage of this technology is its potential to reduce energy consumption by up to 40% when integrated into the FPH drying process. Although this technology is currently industrialized primarily for juices, it can achieve concentrations of up to 60°Brix and manage viscosities up to 400 mPa.s. Numerous studies have been dedicated to enhancing design and processes, leading to a 35% reduction in the system's capital cost and a 20% reduction in energy consumption. Moreover, freeze concentration can synergize with other concentration techniques, creating more efficient hybrid processes. This review aims to introduce freeze concentration as a superior option for preserving fish protein hydrolysates, enhancing their stability, and maintaining their nutritional and bioactive qualities.

Very high frequency radiation emitted by negative narrow bipolar events occurred over malacca strait

In this paper, Very-High Frequency (VHF) radiation pulses associated with 11 negative Narrow Bipolar Events (NBEs) produced by a tropical storm over Malacca Strait are examined. The lightning data were recorded from a measurement station (ST) which consisted of a fast antenna (FA) and three VHF sensors (two 5 m perpendicular baselines interferometer). The average rise time (RT), average zero-crossing time (ZCT), average pulse duration (PD), and range of peak currents of the negative NBEs were 1.4 ± 0.4 μs, 2.7 ± 1.0 μs, 12.0 ± 6.9 μs, and −10 to −64 kA, respectively. The key finding is that all VHF radiation pulses have been found to precede the negative NBEs with an average lead time of 0.7 ± 0.3 μs. An interferometer map for one negative NBE (labelled as NBE10) detected at 35.7 km from ST has shown a characteristic of mixed propagation direction of fast streamers. The first VHF radiation source was detected at 12.4 ± 0.4 km above sea level. The total length and estimated velocity of the main propagation of the VHF radiation sources were 2.2 ± 0.7 km and between 1.4 × 108 and 2.8 × 108 ms−1, respectively. Moreover, based on the Himawari satellite image, the maximum extent of the cloud top height was estimated to be around 20.9 km over sea level (over Malacca Strait). All the VHF radiation sources associated with NBE10 were suggested to be detected above the main negative charge region (6 km altitude that corresponds to −10 °C). Thus, it could be suggested that NBE10 was initiated most likely in the environment of the ice crystals alone, based on the first altitude of the VHF radiation source and maximum extent of cloud top height.

Effect of Turbulence on the Collision Rate between Settling Ice Crystals and Droplets

Abstract In mixed-phase clouds, graupel forms by riming, a process whereby ice crystals and supercooled water droplets settling through a turbulent flow collide and aggregate. We consider here the early stage of the collision process of small ice crystals with water droplets and determine numerically the geometric collision kernel in turbulent flows (therefore neglecting all interactions between the particles and assuming a collision efficiency equal to unity), over a range of energy dissipation rate 1–250 cm2 s−3 relevant to cloud microphysics. We take into account the effect of small, but nonzero fluid inertia, which is essential since it favors a biased orientation of the crystals with their broad side down. Since water droplets and ice crystals have different masses and shapes, they generally settle with different velocities. Turbulence does not play any significant role on the collision kernel when the difference between the settling velocities of the two sets of particles is larger than a few millimeters per second. The situation is completely different when the settling speeds of droplets and crystals are comparable, in which case turbulence is the main cause of collisions. Our results are compatible with those of recent experiments according to which turbulence does not clearly increase the growth rate of tethered graupel in a flow transporting water droplets.

Secondary Ice Production in Simulated Deep Convective Clouds: A Sensitivity Study

Abstract Multiple mechanisms have been proposed to explain secondary ice production (SIP), and SIP has been recognized to play a vital role in forming cloud ice crystals. However, most weather and climate models do not consider SIP in their cloud microphysical schemes. In this study, in addition to the default rime splintering (RS) process, two SIP processes, namely, shattering/fragmentation during freezing of supercooled rain/drizzle drops (DS) and breakup upon ice–ice collisions (BR), were implemented into a two-moment cloud microphysics scheme. Besides, two different parameterization schemes for BR were introduced. A series of sensitivity experiments were performed to investigate how SIP impacts cloud microphysics and cloud phase distributions in warm-based deep convective clouds developed in the central part of Europe. Simulation results revealed that cloud microphysical properties were significantly influenced by the SIP processes. Ice crystal number concentrations (ICNCs) increased up to more than 20 times and surface precipitation was reduced by up to 20% with the consideration of SIP processes. Interestingly, BR was found to dominate SIP, and the BR process rate was larger than the RS and DS process rates by four and three orders of magnitude, respectively. Liquid pixel number fractions inside clouds and at the cloud top decreased when implementing all three SIP processes, but the decrease depended on the BR scheme. Peak values of ice enhancement factors (IEFs) in the simulated deep convective clouds were 102–104 and located at −24°C with the consideration of all three SIP processes, while the temperature dependency of IEF was sensitive to the BR scheme. However, if only RS or RS and DS processes were included, the IEFs were comparable, with peak values of about 6, located at −7°C. Moreover, switching off the cascade effect led to a remarkable reduction in ICNCs and ice crystal mass mixing ratios. Significance Statement The cloud phase is found to have a significant impact on cloud evolution, radiative properties, and precipitation formation. However, the simulation of the cloud phase is a big challenge for cloud research because multiple processes are not well described or missing in numerical models. In this study, we implemented two secondary ice production (SIP) processes, namely, shattering/fragmentation during the freezing of supercooled rain/drizzle drops and breakup upon ice–ice collisions, which are missing in most numerical models. Sensitivity experiments were conducted to investigate how SIP impacts cloud microphysics and cloud phase in deep convective clouds. We found that SIP significantly impacts in-cloud and cloud-top phase distribution. We also identified that the collisional breakup of ice particles is the dominant SIP process in the simulated deep convective clouds.

Estimation of unfrozen water content of saturated sandstones using nuclear magnetic resonance, mercury intrusion porosimetry, and ultrasonic tests

The unfrozen water content (UWC) is a crucial parameter that affects the strength and thermal properties of rocks in relation to engineering construction and geological disasters in cold regions. In this study, three different methods were employed to test and estimate the UWC of saturated sandstones, including nuclear magnetic resonance (NMR), mercury intrusion porosimetry (MIP), and ultrasonic methods. The NMR method enabled the direct measurement of the UWC of sandstones using the free induction decay (FID). The MIP method was used to analyze the pore structures of sandstones, with the UWC subsequently calculated based on pore ice crystallization. Therefore, the MIP test constituted an indirect measurement method. Furthermore, a correlation was established between the P-wave velocity and the UWC of these sandstones based on the mixture theory, which could be employed to estimate the UWC as an empirical method. All methods demonstrated that the UWC initially exhibited a rapid decrease from 0 °C to −5 °C and then generally became constant beyond −20 °C. However, these test methods had different characteristics. The NMR method was used to directly and accurately calculate the UWC in the laboratory. However, the cost and complexity of NMR equipment have precluded its use in the field. The UWC can be effectively estimated by the MIP test, but the estimation accuracy is influenced by the ice crystallization process and the pore size distribution. The P-wave velocity has been demonstrated to be a straightforward and practical empirical parameter and was utilized to estimate the UWC based on the mixture theory. This method may be more suitable in the field. All methods confirmed the existence of a hysteresis phenomenon in the freezing-thawing process. The average hysteresis coefficient was approximately 0.538, thus validating the Gibbs–Thomson equation. This study not only presents alternative methodologies for estimating the UWC of saturated sandstones but also contribute to our understanding of the freezing-thawing process of pore water.

Visualization of intracellular ice formation and growth in mouse oocytes

BACKGROUND: Characterization of intracellular ice formation (IIF) in oocytes during the freezing and thawing processes will contribute to optimizing their cryopreservation. However, the observation of the ice formation process in oocytes is limited by the spatiotemporal resolution of the cryomicroscope systems. OBJECTIVE: To observe the intracellular icing of oocytes during cooling and rewarming, and to study the mechanism of formation and growth of intracellular ice in oocytes. MATERIALS AND METHODS: Mouse oocytes were frozen at different cooling rates to induce intracellular ice formation using a cryomicroscopy system consisting of a microscope equipped with a cryogenic cold stage, an automatic cooling system, a temperature control system, and a high-speed camera. The growth patterns of intracellular ice in oocytes were analyzed from the images recorded. Finally, the growth rate of intracellular ice formation in oocytes was calculated using an automatic intracellular ice tracking method.RESULTS: The IIF temperature decreased gradually with the increase in cooling rate. Initiation sites of IIF could be classified into three categories: marginal type, internal type and coexisting type. There was a strong predominance for ice crystal initiation site in the oocytes, with up to 80% of the initiation sites located in the marginal region. The intracellular ice growth modes of darkening and twitching cells were characterized by “spreading” and “clustering”, respectively. In addition, twitching cells started to recrystallize during rewarming, while darkening cells did not. The instantaneous maximal growth rate of ice crystals in twitching cells was about 10 times higher than that in darkening cells. CONCLUSION: By visualising the growth of ice crystals in mouse oocytes during cooling and rewarming, we obtained valuable information on the kinetics of ice formation and melting in these cells. This information can help us understand how ice formation and melting affect the viability and quality of oocytes after cryopreservation.

Porous silicate cement membrane: Unraveling the effect of triethanolamine on ice crystal changing, pore structure, and performance

Triethanolamine (TEA) has been broadly used as the organic amine conditioning agent to modify the workability of cement-based materials. However, the effect of TEA on the structure and property of porous silicate cement membranes has not been reported. In this paper, TEA was applied to study its effect on parameters of porous silicate cement membranes based on the preparation method combining freeze casting and heat-dry curing, because it is easy to form complexes with cement particles. The effect and acting mechanism of TEA on porous silicate cement membranes were researched using a series of characterizations and molecular dynamics (MD) simulation. Results showed that TEA significantly improved the performance of porous silicate cement membranes. The addition of TEA changed the pore morphology of porous silicate cement membranes from lamellar structures to cellular structures, with mesoporous size distribution focusing on 2.5–4.5 nm at TEA doping ratio of 0.16 wt%. The oil-water separation performance could reach up to 99.6 %. Through comprehensive comparison, the porous silicate cement membrane with 1.0 wt% TEA showed better holistic preponderance of oil-water separation and permeation flux. Quantum chemistry calculation and MD simulation were used to briefly explain the influence of TEA on phase transformation. MD showed that adding TEA changed the morphology and structure of ice crystals. The percentage of the Ih structure significantly increased from 53 % to 86 % after adding TEA. This study might expand the application of TEA in other aspects and enlighten relevant workers in new experimental designs.

Ice/salt assisted synthesis of ultrathin two-dimensional nitrogen doped carbon nanosheets for fast lithium storage

Two-dimensional carbon nanosheets have garnered considerable interest as promising anode materials in energy storage devices due to their large specific surface area and excellent conductivity. The efficient synthesis of ultrathin nitrogen-doped carbon nanosheets is achieved with the aid of cysteine, employing a green ice/salt-assisted strategy. Ice influences the growth direction of salt crystals and determines the distribution of sodium lignosulfonate on the surfaces of both ice and salt crystals. The introduction of methionine incorporates heteroatoms, altering the electronic structure and chemical activity of the material, thereby effectively enhancing its lithium storage performance. The initial charge capacity of the optimized sample reached 766.4 mA h g−1 at a current density of 0.2 A g−1, maintaining a capacity of 571.1 mA h g−1 after 100 cycles. This study presents an innovative method for fabricating ultrathin carbon nanosheets using eco-friendly, cost-effective sodium lignosulfonate, showcasing a promising candidate for lithium-ion batteries and future energy storage technologies.

Observation and analysis of the ultra-rapid cooling effect of cryoprotectant droplets on a sapphire surface

Cryopreservation has emerged as a promising technology to realize semipermanent storage of biomaterials widely used in assisted reproduction and cell therapy. A large portion of successful cryopreservation requires the combination of ultra-rapid cooling and appropriate low-toxicity cryoprotectant agents, which inhibits the formation of ice crystals that damages the cells lethally. Conventional approaches are not competent in accurately capturing high enough cooling rate and more importantly, not able to simultaneously track the instant appearance of the sample at a microscale level during the momentary cooling process. A rapid freezing device for the droplet sample study purpose was designed and developed, which is capable of visualization of the sample on a sapphire surface at a vitrification cooling rate over 104 K/min. The instantaneous temperature changes and the appearance of the cooling samples were recorded at the speed of 10 kHz and 2000 frames. Typical vitrification and crystallization processes were observed and analysed. Low concentrations of the CPA solution inhibited the formation and growth of the crystals, and resulted in the formation of layered ice, punctate ice and scattered small ice. The experimental results could contribute to a better understanding of the ultra-rapid cooling mechanism on cryoprotectant droplets.