Hyperspectral Remote Sensing Research Articles

Mapping Roof Materials in Cities for Food, Water, and Energy Production: A Mediterranean Metropolitan Area Case Study

ABSTRACT In recent years, rooftops have been used as productive spaces for local resource (e.g. food, water, or energy) production. The main objective of this study is to demonstrate the potential of hyperspectral data to identify roof materials in cities. The case study area is located in a Mediterranean region north of Barcelona (Spain); diverse building typologies, building uses (residential, industrial, office, services and retail) and population densities constitute this study area. Two hyperspectral remote sensors (HRSs) were used to obtain hyperspectral images. Seven roof classes were identified using the k-means clustering algorithm. Most roofs were identified as metals (33 percent), followed by ceramic tiles (22 percent). The findings showed that 51 percent of roofs could be suitable for food, water, or energy production. Nevertheless, for a more reliable assessment of this potential, more criteria are needed.

Review on the development of multi- and hyperspectral remote sensing technology for exploration of copper–gold deposits

Most Copper (Cu) and Gold (Au) deposits are accompanied by hydrothermal alteration, generally related to ore-forming hydrothermal fluids. Multispectral and hyper-spectral Remote Sensing (RS) technology is essential for Cu-Au mineral prospecting. This paper provides an overview of RS data and the research situation and development tendencies of RS exploration technologies related to Cu-Au deposits. Initially, RS geologists applied the Band Ratio (BR) and Principal Component Analysis (PCA) to extract hydroxyl and iron anomalies from Landsat RS data to characterize the hydrothermal alterations associated with Cu-Au deposits. In the era of advanced spaceborne thermal emission and reflection radiometry (ASTER), clay minerals, sulfate minerals, carbonate minerals, silica minerals, and iron minerals can be identified because of three Visible and near-infrared bands (VNIR), six shortwave infrared bands (SWIR), and five Thermal Infrared bands (TIR). Alteration of mineral assemblages can be carried out to map alteration zones, which are essential for calibrating Cu-Au alteration zones, such as the typical alteration zoning characteristics of Porphyry Copper Deposits (PCD). Because of its high spectral resolution, Satellite hyperspectral RS can quantitatively map surface alteration minerals to indicate the exploration of Cu-Au deposits. RS geologists have extensively researched matching libraries and field spectra for Alteration Mineral Mapping (AMM). However, subpixel mineral information caused by low spatial resolution and atmospheric factors has an unavoidable influence on satellite hyperspectral RS AMM, and it is essential to use low-altitude unmanned aerial vehicle (UAV) hyperspectral RS. UAV hyperspectral AMM combined with geochemistry and geophysics is a means of prospecting and exploring Cu-Au deposits.

Application of a Hyperspectral Remote Sensing Model for the Inversion of Nickel Content in Urban Soil

Hyperspectral remote sensing technology can provide a rapid and nondestructive method for soil nickel (Ni) content detection. In order to select a high-effective method for estimating the soil Ni content using a hyperspectral remote sensing technique, 88 soil samples were collected in Urumqi, northwest China, to obtain Ni contents and related hyperspectral data. At first, 12 spectral transformations were used for the original spectral data. Then, Pearson’s correlation coefficient analysis (PCC) and the CARS method were used for selecting important wavelengths. Finally, partial least squares regression (PLSR), random forest regression (RFR) and support vector machine regression (SVMR) models were used to establish the hyperspectral inversion models of the Ni content in the soil using the important wavelengths. The coefficient of determination (R2), root mean square error (RMSE), mean absolute error (MAE), and residual prediction deviation (RPD) were selected to evaluate the inversion effects of the models. The results indicated that using the PCC and CARS method for the original and transformed wavebands can effectively improve the correlations between the spectral data and Ni content of the soil in the study area. The random forest regression model, based on the first-order differentiation of the reciprocal (RTFD–RFR), was more stable and had the best inversion effects, with the highest predictive ability (R2 = 0.866, RMSE = 1.321, MAE = 0.986, RPD = 2.210) for determining the Ni content in the soil. The RTFD–RFR methods can be used as a means of the inversion of the Ni content in urban soil. The results of the study can provide a technical support for the hyperspectral estimation of the Ni content of urban soil.

Modeling and Unsupervised Unmixing Based on Spectral Variability for Hyperspectral Oceanic Remote Sensing Data with Adjacency Effects

In a previous paper, we introduced (i) a specific hyperspectral mixing model for the sea bottom, based on a detailed physical analysis that includes the adjacency effect, and (ii) an associated unmixing method that is supervised (i.e., not blind) in the sense that it requires a prior estimation of various parameters of the mixing model, which is constraining. We here proceed much further, by first analytically showing that the above model can be seen as a specific member of the general class of mixing models involving spectral variability. Therefore, we then process such data with the IP-NMF unsupervised (i.e., blind) unmixing method that we proposed in previous works to handle spectral variability. Such variability especially occurs when the sea depth significantly varies over the considered scene. We show that IP-NMF then yields significantly better pure spectra estimates than a classical method from the literature that was not designed to handle such variability. We present test results obtained with realistic synthetic data. These tests address several reference water depths, up to 7.5 m, and clear or standard water. For instance, they show that when the reference depth is set to 7.5 m and the water is clear, the proposed approach is able to distinguish various classes of pure materials when the water depth varies up to ±0.2 m around this reference depth, over all pixels of the analyzed scene or over a “subscene”: the overall scene may first be segmented, to obtain smaller depths variations over each subscene. The proposed approach is therefore effective and can be used as a building block in performing the subpixel classification of the sea bottom for shallow water.

A Scalable Reduced-Complexity Compression of Hyperspectral Remote Sensing Images Using Deep Learning

Two key hurdles to the adoption of Machine Learning (ML) techniques in hyperspectral data compression are computational complexity and scalability for large numbers of bands. These are due to the limited computing capacity available in remote sensing platforms and the high computational cost of compression algorithms for hyperspectral data, especially when the number of bands is large. To address these issues, a channel clusterisation strategy is proposed, which reduces the computational demands of learned compression methods for real scenarios and is scalable for different sources of data with varying numbers of bands. The proposed method is compatible with an embedded implementation for state-of-the-art on board hardware, a first for a ML hyperspectral data compression method. In terms of coding performance, our proposal surpasses established lossy methods such as JPEG 2000 preceded by a spectral Karhunen-Loève Transform (KLT), in clusters of 3 to 7 bands, achieving a PSNR improvement of, on average, 9 dB for AVIRIS and 3 dB for Hyperion images.

Remote Sensing for Lithology Mapping in Vegetation-Covered Regions: Methods, Challenges, and Opportunities

Remote sensing (RS) technology has significantly contributed to geological exploration and mineral resource assessment. However, its effective application in vegetated areas encounters various challenges. This paper aims to provide a comprehensive overview of the challenges and opportunities associated with RS-based lithological identification in vegetated regions which includes the extensively reviewed prior research concerning the identification of lithology in vegetated regions, encompassing the utilized remote sensing data sources, and classification methodologies. Moreover, it offers a comprehensive overview of the application of remote sensing techniques in the domain of lithological mapping. Notably, hyperspectral RS and Synthetic Aperture Radar (SAR) have emerged as prominent tools in lithological identification. In addition, this paper addresses the limitations inherent in RS technology, including issues related to vegetation cover and terrain effects, which significantly impact the accuracy of lithological mapping. To propel further advancements in the field, the paper proposes promising avenues for future research and development. These include the integration of multi-source data to improve classification accuracy and the exploration of novel RS techniques and algorithms. In summary, this paper presents valuable insights and recommendations for advancing the study of RS-based lithological identification in vegetated areas.

UAV hyperspectral remote sensor images for mango plant disease and pest identification using MD-FCM and XCS-RBFNN.

To diminish disease transmission together with promoting effective management techniques, it is crucial to monitor plant health and detect pathogens earlier. The initial part in reducing losses sourced from plant diseases is to make an accurate and earlier identification. Thus, the usage of unmanned aerial vehicle (UAV) hyperspectral imaging (HSI) sensors for surveying and assessing crops, orchards, and forests has rapidly elevated over the last decade, particularly for the stress management like water, diseases, nutrition deficits, and pests. Using Minkowski Distance-based Fuzzy C Means (MD-FCM) clustering and Xavier initialization-adapted Cosine Similarity-induced Radial Bias Function Neural Network (XCS-RBFNN) techniques, a UAV HS imaging remote sensor for Spatial and Temporal Resolution (STR) of mango plant disease and pest identification is proposed in this scheme. Collecting the input UAV source (image or video) is eventuated initially along with the Region of Interest (ROI) calculated which is followed by preprocessing. Leaf segmentation is eventuated using Logistic U-net after preprocessing. Next, MD-FCM performs clustering to cluster the diseased leaves and pests individually. The disease and pest characteristics are then retrieved separately and classified further. The requisite features are then chosen from the retrieved features utilizing the Levy Flight Distribution-produced Butterfly Optimization Algorithm (LFD-BOA). Finally, the XCS-RBFNN classifier is utilized to categorize the various diseases together with pests found in the UAV input source using the chosen features. The proposed framework's experimental findings are then compared to some prevailing schemes, with the results revealing that the proposed work outperforms other benchmark techniques.

Multi-Parameter Health Assessment of Jujube Trees Based on Unmanned Aerial Vehicle Hyperspectral Remote Sensing

To address the current difficult problem of scientifically assessing the health status of date palm trees due to a single parameter for date palm health assessment, an imperfect index system, and low precision. In this paper, using jujube trees in 224 regiment of the 14th division of Xinjiang Production and Construction Corps “Kunyu city” as the research object, we carried out the inversion study of various physicochemical parameters of jujube trees (canopy chlorophyll content, leaf area index (LAI), tree height, canopy area) using the unmanned aerial vehicle (UAV) hyperspectral imagery of jujube trees during the period of fruit expansion, and put forward a model for assessing the health of jujube trees based on multiple physicochemical parameters. First, we calculated six spectral indices for inversion of chlorophyll content and four spectral index for inversion of LAI, analyzed the spectral index with high correlation with chlorophyll content and LAI of jujube trees canopy, and constructed the inversion models of chlorophyll content and LAI. Second, the Mask R-CNN model was used to achieve jujube trees’ canopy segmentation and area extraction, and the segmented canopy was matched with the Canopy Height Model (CHM) for jujube trees’ height extraction. Finally, based on the four physicochemical parameters of inversion, we construct four jujube trees’ health assessment models, namely, Partial Least Squares Regression Analysis (PLSR), Random Forest (RF), Support Vector Machines (SVM), and Decision Tree (DT). The results showed that the R2 of the PLSR tree health assessment model constructed based on the multi-physical and chemical parameters of chlorophyll content, LAI, tree height, and canopy area was 0.853, and the RMSE was 0.3. Compared with the jujube trees’ health assessment models constructed by RF, SVM, and DT, the R2 increased by 0.127, 0.386, and 0.165, and the RMSE decreased by 0.04, 0.175, and 0.063, respectively. This paper can achieve rapid and accurate inversion of multi-physical and chemical parameters of jujube trees with the help of UAV hyperspectral images, and the PLSR model constructed based on multi-physical and chemical parameters can accurately assess the health status of jujube trees and provide a reference for a scientific and reasonable assessment of jujube trees’ health.

Predicting the Surface Soil Texture of Cultivated Land via Hyperspectral Remote Sensing and Machine Learning: A Case Study in Jianghuai Hilly Area

Soil reflectance spectra and hyperspectral images have great potential to monitor and evaluate soil texture in large-scale scenarios. In hilly areas, sand, clay, and silt have similar spectral characteristics in visible, near-infrared, and short-wave infrared (VNIR-SWIR) reflection spectra. Soil texture spectra belong to mixed spectra despite some differences in particle size, mineral composition, and water content, making their distinction difficult. The accurate identification of the content within different particle sizes is difficult as it involves capturing spectral reflection features. Therefore, this study aimed to predict soil texture content through machine learning and unmixing the soil texture’s spectra while also comparing their respective modelling performances. Taking typical cultivated land in the Jianghuai hills as an example, the GaoFen-5 Advanced Hyperspectral Imaging (GF-5 AHSI) laboratory spectra of soil samples were used to predict sand, silt, and clay particle contents using partial least squares regression (PLSR) and convolutional neural networks (CNNs). The entire spectra of VNIR-SWIR regions were smoothed, and the dimensions were reduced via principal component analysis (PCA). The prediction models of sand, silt, and clay particle content were constructed, and inversion maps were generated using AHSI. The results showed that the PCA-CNN model achieved a higher prediction precision than the PCA-PLSR in both ASD and GF-5 data. Clay content exhibited the highest predictive performance with a coefficient of determination (R2) of 0.948 and 0.908 and a root mean square error (RMSE) of 26.51 g/kg and 31.24 g/kg, respectively, which represented a 39.0% and 79.8% increase in R2 and a 57% and 57.1% decrease in RMSE compared to that of the PCA-PLSR. This method indicates that the PCA-CNN model can effectively achieve nonlinear interactions between multiple spectral components and better model and fit spectral mixing processes; moreover, it provides an alternative method for investigating the spatial distribution of soil texture.

Retracted: Monitoring of Nitrogen Transport in Pear Trees Based on Ground Hyperspectral Remote Sensing and Digital Image Information

Retracted: Monitoring of Nitrogen Transport in Pear Trees Based on Ground Hyperspectral Remote Sensing and Digital Image Information

Lithium-Rich Pegmatite Detection Integrating High-Resolution and Hyperspectral Satellite Data in Zhawulong Area, Western Sichuan, China

Lithium (Li) has grown to be a strategic key metal due to the enormous demand for the development of new energy industries over the world. As one of the most significant sources of Li resources, pegmatite-type Li deposits hold a large share of the mining market. In recent years, several large and super-large spodumene (Spd)-rich pegmatite deposits have been discovered successively in the Hoh-Xil–Songpan-Garzê (HXSG) orogenic belt of the northern Tibetan Plateau, indicative of the great Li prospecting potential of this belt. Hyperspectral remote sensing (HRS), as a rapidly developing exploration technology, is especially sensitive to the identification of alteration minerals, and has made important breakthroughs in porphyry copper deposit exploration. However, due to the small width of the pegmatite dykes and the lack of typical alteration zones, the ability of HRS in the exploration of Li-rich pegmatite deposits remains to be explored. In this study, Li-rich pegmatite anomalies were directly extracted from ZY1-02D hyperspectral imagery in the Zhawulong (ZWL) area of western Sichuan, China, using target detection techniques including Adaptive Cosine Estimator (ACE), Constrained Energy Minimization (CEM), Spectral Angle Mapper (SAM), and SAM with BandMax (SAMBM). Further, the Li-rich anomalies were superimposed with the distribution of pegmatite dykes delineated based on GF-2 high-resolution imagery. Our final results accurately identified the known range of Spd pegmatite dykes and further predicted two new exploration target areas. The approaches used in this study could be easily extended to other potential mineralization areas to discover new rare metal pegmatite deposits on the Tibetan Plateau.

Hyperspectral-to-image transform and CNN transfer learning enhancing soybean LCC estimation

Leaf chlorophyll content (LCC) is a distinct indicator of crop health status used to estimate nutritional stress, diseases, and pests. Thus, accurate LCC information can assist in the monitoring of crop growth. The combined use of hyperspectral and deep learning techniques (e.g., convolutional neural network [CNN] and transfer learning [TL]) can improve the performance of crop LCC estimation. We propose a hyperspectral-to-image transform (HIT) technique for converting canopy hyperspectral reflectance into 2D images. We designed a CNN architecture called LCCNet that fuses the deep and shallow features of CNNs to improve soybean LCC estimation. This study evaluated the combined use of hyperspectral remote sensing (RS), HIT, CNN, and TL techniques to estimate soybean LCC for multiple growth stages. The LCCNet was pre-trained based on a simulated dataset (n = 114,048) from the PROSAIL radiative transfer model (RTM) and used as prior knowledge for this work. The soybean canopy hyperspectral RS dataset (n = 910) was obtained using a FieldSpec 3 spectrometer. The knowledge gained while learning to estimate LCC from PROSAIL RTM was applied when estimating field soybean LCC (Dualex readings). TL was used to enhance the soybean estimation model, called the Soybean-LCCNet (RTM + HIT + CNN + TL) model. We tested the LCC (Dualex readings) estimation performance using (a) HIT + CNN, (b) LCCNet (RTM + HIT + CNN), (c) Soybean-LCCNet (RTM + HIT + CNN + TL), and (d) widely used LCC spectral features + partial least squares regression (PLSR). Four methods were ranked based on their LCC estimation performance: Soybean-LCCNet (R2 = 0.78, RMSE = 4.13 (Dualex readings)) > HIT + CNN (R2 = 0.75, RMSE = 4.41 (Dualex readings)) > PLSR-based method (R2 = 0.61, RMSE = 5.39 (Dualex readings)) > LCCNet (R2 = 0.53, RMSE = 7.11 (Dualex readings)). The main conclusions of this work are as follows: (1) HIT + CNN can provide a more robust LCC estimation performance than the widely used LCC SIs; (2) Fusing the deep and shallow features of CNNs can improve the performance of RS soybean LCC (Dualex readings) estimation; and (3) Soybean-LCCNet can reuse the CNN layer information of a pre-trained LCCNet based on a PROSAIL RTM dataset and improve the soybean LCC estimation performance.

UAV-borne hyperspectral estimation of nitrogen content in tobacco leaves based on ensemble learning methods

Fast, accurate, and real-time detection of nitrogen content in tobacco leaves is of great significance for monitoring the quality of tobacco leaves. Hyperspectral remote sensing (HRS) coupled with unmanned aerial vehicle (UAV) platform can provide unprecedented spectral information of field plants on a large scale. And with the support of various machine learning algorithms, a series of efficient models for leaf nitrogen content (LNC) assessment can be developed. This study aimed to develop a high-performance model to estimate the LNC of tobacco using UAV-borne HRS image data. Meanwhile, to cope with the heterogeneous performance problem of the individual model, ensemble learning strategies were applied to assemble multiple estimators, including multiple linear regression (MLR), decision tree regression (DTR), random forest (RF), adaptive boosting (Adaboost), and stacking to mine more valid data features. To accurately assess the performance of the established models, the coefficient of determination (R2), root mean square error (RMSE), and mean absolute percentage error (MAPE) were introduced as the evaluation indicators, and partial least squares regression (PLSR) was selected as the baseline model. Results on the test set showed that all ensemble learning methods outperformed PLSR (R2=0.680, RMSE=5.402 mg/g, 19.72%). Specifically, the stacking-based models achieved the highest accuracy as well as relatively high stability (R2=0.745, RMSE=4.825 mg/g, 17.98%). This study provides a reference for efficient and non-destructive detection of LNC or other vegetation phenotypic traits using UAV-borne HRS technology.

Spatial Distribution of Soil Heavy Metal Concentrations in Road-Neighboring Areas Using UAV-Based Hyperspectral Remote Sensing and GIS Technology

Monitoring and restoring soil quality in areas neighboring roads affected by traffic activities require a thorough investigation of heavy metal concentrations. This study examines the spatial heterogeneity of copper (Cu) and chromium (Cr) concentrations in a 0.113 km² area adjacent to Jin-Long Avenue in Wuhan, China, using Unmanned Aerial Vehicle (UAV)-based hyperspectral remote sensing technology. Through this UAV-based remote sensing technology, we innovatively achieve a small-scale and fine-grained analysis of soil heavy metal pollution related with traffic activities, which represents a major contribution of this research study. In our approach, we generated 4375 spectral variates by transforming the original spectrum. To enhance result accuracy, we applied the Boruta algorithm and correlation analysis to select optimal spectral variates. We developed the retrieval model using the Gradient Boosting Decision Tree (GBDT) regression method, selected from a set of four regression methods using the LOOCV method. The resulting model yielded R-square values of 0.325 and 0.351 for Cu and Cr, respectively, providing valuable insights into the heavy metal concentrations. Based on the retrieved heavy metal concentrations from bare soil pixels (17,420 points), we analyzed the relationship between heavy metal concentrations and the perpendicular distance from the road. Additionally, we employed the universal kriging interpolation method to map heavy metal concentrations across the entire area. Our findings reveal that the concentration of heavy metals in this area exceeds background values and decreases as the distance from the road increases. This research significantly contributes to the understanding of spatial distribution characteristics and pollution caused by heavy metal concentrations resulting from traffic activities.

Evaluating the Performance of PRISMA Shortwave Infrared Imaging Sensor for Mapping Hydrothermally Altered and Weathered Minerals Using the Machine Learning Paradigm

Satellite images provide consistent and frequent information that can be used to estimate mineral resources over a large spatial extent. Advances in spaceborne hyperspectral remote sensing (HRS) and machine learning can help to support various remote-sensing-based applications, including mineral exploration. Leveraging these advances, the present study evaluates recently launched PRISMA spaceborne satellite images to map hydrothermally altered and weathered minerals using various machine-learning-based classification algorithms. The study was performed for the town of Jahazpur in Rajasthan, India (75°06′23.17″E, 25°25′23.37″N). The distribution map for minerals such as kaolinite, talc, and montmorillonite was generated using the spectral angle mapper technique. The resultant mineral distribution map was verified through an intensive field validation survey on surface exposures of the minerals. Furthermore, the obtained pixels of the end-members were used to develop the machine-learning-based classification models. Measures such as accuracy, kappa coefficient, F1 score, precision, recall, and ROC curve were employed to evaluate the performance of developed models. The results show that the stochastic gradient descent and artificial-neural-network-based multilayer perceptron classifiers were more accurate than other algorithms. Results confirm that the PRISMA dataset has enormous potential for mineral mapping in mountainous regions utilizing a machine-learning-based classification framework.

Identification of Ratholes in Desert Steppe Based on UAV Hyperspectral Remote Sensing

This paper established a mathematical method for the spectral feature extraction of ratholes, based on UAV hyperspectral imaging technology. The degradation of grasslands is a major challenge to terrestrial ecosystems. Rodents not only promote soil erosion and accelerate the process of grassland degradation, but also carry diseases that can easily cause epidemics. The calculation of the number of rodent holes and grassland vegetation cover is an important indicator for monitoring and evaluating grassland degradation. Manual surveys have drawbacks in efficiently monitoring large areas and are human- and material-costly, hardly meeting the current needs of grassland degradation monitoring. Therefore, there is an urgent need to conduct real-time dynamic monitoring of grassland rathole distributions and grassland degradation processes. In this study, a low-altitude remote sensing platform was constructed by integrating a hyperspectral imager with a UAV to collect spectral data of the desert steppes in central Inner Mongolia Autonomous Region, China. Then, the spectral features of ratholes were extracted via radiation correction, noise reduction, and principal component analysis (PCA). Meanwhile, the spectral features of vegetation and bare soil were extracted based on the normalized difference vegetation index (NDVI), which was inputted to calculate the vegetation cover. The results showed that the single-band map extracted based on PCA could effectively determine the location of ratholes, where the overall accuracy and kappa coefficient were 97% and 0.896, respectively. Therefore, the method proposed in this study can accurately identify the location of desert steppe rodent holes. It provides a high-precision technical means for scientific and effective control of grassland rodent infestation and also provides a higher technical means for grassland degradation.

Hyperspectral Remote Sensing for Early Detection of Wheat Leaf Rust Caused by Puccinia triticina

Early crop disease detection is one of the most important tasks in plant protection. The purpose of this work was to evaluate the early wheat leaf rust detection possibility using hyperspectral remote sensing. The first task of the study was to choose tools for processing and analyze hyperspectral remote sensing data. The second task was to analyze the wheat leaf biochemical profile by chromatographic and spectrophotometric methods. The third task was to discuss a possible relationship between hyperspectral remote sensing data and the results from the wheat leaves, biochemical profile analysis. The work used an interdisciplinary approach, including hyperspectral remote sensing and data processing methods, as well as spectrophotometric and chromatographic methods. As a result, (1) the VIS-NIR spectrometry data analysis showed a high correlation with the hyperspectral remote sensing data; (2) the most important wavebands for disease identification were revealed (502, 466, 598, 718, 534, 766, 694, 650, 866, 602, 858 nm). An early disease detection accuracy of 97–100% was achieved from fourth dai (day/s after inoculation) using SVM.

Estimation of Winter Wheat Plant Nitrogen Concentration from UAV Hyperspectral Remote Sensing Combined with Machine Learning Methods

Nitrogen is one of the most important macronutrients and plays an essential role in the growth and development of winter wheat. It is very crucial to diagnose the nitrogen status timely and accurately for applying a precision nitrogen management (PNM) strategy to the guidance of nitrogen fertilizer in the field. The main purpose of this study was to use three different prediction methods to evaluate winter wheat plant nitrogen concentration (PNC) at booting, heading, flowering, filling, and the whole growth stage in the Guanzhong area from unmanned aerial vehicle (UAV) hyperspectral imagery. These methods include (1) the parametric regression method; (2) linear nonparametric regression methods (stepwise multiple linear regression (SMLR) and partial least squares regression (PLSR)); and (3) machine learning methods (random forest regression (RFR), support vector machine regression (SVMR), and extreme learning machine regression (ELMR)). The purpose of this study was also to pay attention to the impact of different growth stages on the accuracy of the model. The results showed that compared with parametric regression and linear nonparametric regression, the machine learning regression method could evidently improve the estimation accuracy of winter wheat PNC, especially using SVMR and RFR, the training set of the model at flowering and filling stage explained 93% and 92% of the PNC variability respectively. The testing set of the model at flowering and filling stages explained 88% and 91% of the PNC variability, the root mean square error of the validation set (RMSEtesting) was 0.82 and 1.23, and the relative prediction deviation (RPD) was 2.58 and 2.40, respectively. Therefore, a conclusion was drawn that it was the best choice to estimate winter wheat PNC at the flowering and filling stage from UAV hyperspectral imagery. Using machine learning methods, SVMR and RFR, respectively, could achieve the most outstanding estimation performance, which could provide a theoretical basis for putting forward the PNM strategy.

A novel method for detecting soil salinity using AVIRIS-NG imaging spectroscopy and ensemble machine learning

Soil salinization is one of the major land degradation processes spread over millions of hectares of global land. Hyperspectral Remote Sensing (HRS) coupled with modern data mining approaches help in real-time and cost-effective assessment or monitoring of salt-affected soils. This study aimed at predicting soil salinity across five sites in India using the Airborne Visible-Infrared Imaging Spectrometer - Next Generation (AVIRIS-NG) data in low to moderately salt-affected cropland soils. We have identified four unique spectral absorption features having sensitivity towards soil salinity through a hybrid feature selection algorithm. Soil electrical conductivity (EC) was estimated using different machine learning (ML) based models such as random forest (RF), gradient boosting machines (GBM), and deep learning (DL). An ensemble of RF and DL models showed the best performance with the coefficient of determination (R2) of 0.89 and 0.55 and normalized root-mean-squared error of 0.15 and 0.16 in training and test datasets, respectively. We also proposed a new hyperspectral soil salinity index using Shannon entropy-based aggregation of selected absorption features. The newly proposed index outperformed other majorly used remote sensing-based salinity indices. It also showed a strong correlation with measured EC (r = 0.68) and ML-predicted soil EC (r = 0.78), both being significant at 1% level of significance. The index was effective in classifying HRS images into six distinct salinity classes. We also assessed the feasibility of applying the proposed salinity index for future hyperspectral missions through the simulation of various spectral-spatial resampling scenarios and estimated the optimal spectral and spatial resolution for salinity prediction. The hyperspectral salinity index can be directly estimated from HRS data without the need for time-consuming and expensive field samplings and used as a proxy to evaluate soil salinity status under field conditions.

Mapping Specific Constituents of an Ochre-Coloured Watercourse Based on In Situ and Airborne Hyperspectral Remote Sensing Data

It is a well-known fact that water bodies are crucial for human life, ecosystems and biodiversity. Therefore, they are subject to regulatory monitoring in terms of water quality. However, land-use intensification, such as open-cast mining activities, can have a direct impact on water quality. Unfortunately, in situ measurements of water quality parameters are spatially limited, costly and time-consuming, which is why we proposed a combination of hyperspectral data, in situ data and simple regression models in this study to estimate and thus monitor various water quality parameters. We focused on the variables of total iron, ferrous iron, ferric iron, sulphate and chlorophyll-a. Unlike other studies, we used a combination of airborne hyperspectral and RGB data to ensure a very high spatial resolution of the data. To investigate the potential of our approach, we conducted simultaneous in situ measurements and airborne hyperspectral/RGB aircraft campaigns at different sites of the Spree River in Germany to monitor the impact of pyrite weathering on water bodies after open-cast mining activities. Appropriate regression models were developed to estimate the five variables mentioned above. The model with the best performance for each variable gave a coefficient of determination R2 of 64% to 79%. This clearly shows the potential of airborne hyperspectral/RGB data for water quality monitoring. In further investigations, we focused on the use of machine learning techniques, as well as transferability to other water bodies. The approach presented here has great potential for the development of a monitoring method for the continuous monitoring of still waters and large watercourses, especially given the freely available space-based hyperspectral missions via EnMAP.