Hypabyssal Kimberlite Research Articles

Emplacement ages of diamondiferous kimberlites in the Wafangdian District, North China Craton: New evidence from LA-ICP-MS U-Pb geochronology of andradite-rich garnet

This contribution presents new U-Pb geochronological data and attempts to elucidate the complex evolution history of various garnet types identified from two kimberlite pipes in the Wafangdian diamond mining district, southern Liaoning Province. These calcic garnets are dominated by andradite with relatively low proportions of schorlomite, grossular and pyrope. Abundant euhedral to subhedral, highly brecciated andradite phenocrysts hosted by LN30 “carbonatite-like” kimberlite samples yield a lower-intercept age of 459.3 ± 3.4 Ma, which is in excellent agreement with the previously reported phlogopite Ar-Ar (463.9 ± 0.9 Ma) and Rb-Sr ages (461.7 ± 4.8 Ma). Based on their trace element and C-O isotopic compositions of associated groundmass carbonate, we infer that these primary magmatic andradites probably originated from kimberlitic magmas. By comparison, three compositionally and texturally distinct groups of Ti-bearing andradites from LN42 hypabyssal kimberlites separately define three well-fitted regression lines with lower intercept ages at 581 ± 12 Ma, 414.9 ± 9.3 Ma and 292.0 ± 5.7 Ma, respectively. Relict andradite xenocrysts implies that ancient lower crust of the North China Craton (NCC) might have been affected by a significant but less-known tectonothermal event to varying degrees at ∼ 0.6 Ga. By contrast, fresh grains of magmatic Ti-andradites with chemical zoning produce a relatively young age of ∼ 415 Ma, which can still provide minimum age estimates for the most recent pulses of Paleozoic kimberlite magmatism in this study area. Noteworthily, a yet unrecognized local-scale hydrothermal alteration event at ∼ 292 Ma has been recorded in the texturally distinct population of secondary hydroandradites, whose age reported here for the first time is geologically meaningful. To sum up, this study further highlights andradite U-Pb dating as a potential robust geochronometer for constraining the late-stage evolution of kimberlite magmas as well as post emplacement hydrothermal alteration.

40Ar/39Ar geochronology of phlogopites and its mineralization in the Mithapukur kimberlites: New Lower Cretaceous (∼109–115 Ma) kimberlitic occurrences in Bangladesh

Phlogopites in a suite of ultramafics from Bangladesh have been analyzed to ascertain the mineralization and the timing of cooling of phlogopites and reveal their emplacement tectonics. In recent times, the 40Ar/39Ar dating method is incredibly popular due to having phlogopite in most kimberlitic rocks. The 40Ar/39Ar age dating of phlogopites yields ideal plateau ages of 108.5 ± 1.3 Ma, 110.8 ± 0.9 Ma, 113.7 ± 1.1 Ma, 114.8 ± 1.0 Ma and an upper-staircase release pattern age of 111.7 ± 1.1 Ma. It is the first report on the Lower Cretaceous kimberlites (109–115 Ma) occurrence in Bengal Basin, emplaced during the break-up of India and Antarctica-Australia. The studied phlogopite chemistry and petrographic data suggest that the rocks are typically orangeites, comparable with Indian orangeites, Antarctica and some African transitional or hypabyssal kimberlites. These phlogopites are invariably consistent with most of the kimberlites of the world and those described as a clear sign of a metasomatized source in the mantle. The tectonic activities of the studied ultramafics suggest the development of enormous stress gradients in the lithosphere, creating a path of melt migration from the transitional or lower mantle. These multiple tectono-thermal processes were the key driver for the present kimberlites’ emplacement within Paleoproterozoic basement rocks.

Petrographic and geochemical characteristics associated with felsic xenolith assimilation in kimberlite

ABSTRACT Assimilation of country rock xenoliths by the host kimberlite can result in the development of concentric reaction zones within the xenoliths and a reaction halo in the surrounding contaminated kimberlite. Petrographic and geochemical changes across the reaction zones in the xenoliths and the host kimberlite were studied using samples with different kimberlite textures and contrasting xenolith abundances from the Renard 65 kimberlite pipe. The pipe, infilled by Kimberley-type pyroclastic (KPK) and hypabyssal kimberlite (HK) and kimberlite with transitional textures, was emplaced into granitoid and gneisses of the Superior Craton. Using samples of zoned, medium-sized xenoliths of both types, mineralogical and geochemical data were collected across xenolith-to-kimberlite profiles and contrasted with those of fresh unreacted country rock and hypabyssal kimberlite. The original mineralogy of the unreacted xenoliths (potassium feldspar-plagioclase-quartz-biotite in granitoid and plagioclase-quartz-biotite-orthopyroxene in gneiss) is replaced by prehnite, pectolite, and diopside. In the kimberlite halo, olivine is completely serpentinized and diopside and late phlogopite crystallized in the groundmass. The xenoliths show the progressive degrees of reaction, textural modification, and mineral replacement in the sequence of kimberlite units KPK — transitional KPK — transitional HK. The higher degree of reaction observed in the HK-hosted xenoliths as compared to the KPK-hosted xenoliths in this study and elsewhere may partly relate to higher temperatures in xenoliths included in an HK melt. The correlation between the degree of reaction and the kimberlite textures suggests that the reactions are specific to and occur within each emplaced batch of magma and cannot result from external post-emplacement processes that should obliterate the textural differences across the kimberlite units. Xenolith assimilation may have started in the melt, as suggested by the textures in the xenoliths and the surrounding halos and proceeded in the subsolidus. Elevated CaO at the kimberlite-xenolith contact appears to be an important factor in producing the concentric mineralogical zoning in assimilated xenoliths.

Experimental investigation on the effects of microwave irradiation on kimberlite and granite rocks

Abstract This study is a part of an overall research project on the effects of microwave (MW) irradiation on rocks for assisted rock breaking systems as well as mineral processing at McGill University. For the first time, this paper highlights a comprehensive investigation on the effects of microwave irradiation on Canadian kimberlites. Potential contribution to the continuous rock excavation and rock weakening effect prior to implementation of mechanical techniques was explored. Two different kimberlite rocks, i.e. volcaniclastic kimberlite (VK) and hypabyssal kimberlite (HK), and granite samples were studied. Some important physical properties of the rock samples were measured including rock quality designation (RQD), specific gravity, porosity, and specific heat capacity. Rock samples were treated for various exposure times using a multi-mode MW unit at different power levels ranging from 2 kW to 15 kW. The effect of MW irradiation on rock samples was investigated. The results indicate that the mechanical properties including unconfined compressive strength (UCS) and Brazilian tensile strength (BTS) were significantly dropped as a result of MW irradiation. Finally, the effect on rock abrasivity using the Cerchar abrasivity index (CAI) has also been discussed.

Joint inversion of potential-fields data over the DO-27 kimberlite pipe using a Gaussian mixture model prior

We have carried out petrophysically and geologically guided inversions (PGIs) to jointly invert airborne and ground-based gravity data and airborne magnetic data to recover a quasi-geology model of the DO-27 kimberlite pipe in the Tli Kwi Cho (also referred to as TKC) cluster. DO-27 is composed of three main kimberlite rock types in contact with each other and embedded in a granitic host rock covered by a thin layer of glacial till. The pyroclastic kimberlite (PK), which is diamondiferous, and the volcanoclastic kimberlite (VK) have anomalously low density, due to their high porosity, and weak magnetic susceptibility. They are indistinguishable from each other based upon their potential-field responses. The hypabyssal kimberlite (HK), which is not diamondiferous, has been identified as highly magnetic and remanent. Quantitative petrophysical signatures for each rock unit are obtained from sample measurements, such as the increasing density of the PK/VK unit with depth and the remanent magnetization of the HK unit, and are represented as a Gaussian mixture model (GMM). This GMM guides the PGI toward generating a 3D quasi-geology model with physical properties that satisfies the geophysical data sets and the petrophysical signatures. Density and magnetization models recovered individually yield volumes that have physical property combinations that do not conform to any known petrophysical characteristics of the rocks in the area. A multiphysics PGI addresses this problem by using the GMM as a coupling term, but it puts a volume of the PK/VK unit at a location that is incompatible with geologic information from drillholes. To conform to that geologic knowledge, a fourth unit is introduced, PK-minor, which is petrophysically and geographically distinct from the main PK/VK unit. This inversion produces a quasi-geology model that presents good structural locations of the diamondiferous PK unit and can be used to provide a resource estimate or decide the locations of future drillholes.

Controls on the explosive emplacement of diamondiferous kimberlites: New insights from hypabyssal and pyroclastic units in the Diavik mine, Canada

Kimberlites are mantle-derived magmas that either crystallise as hypabyssal intrusions, erupt explosively after rapid ascent to the surface, or less commonly form lava lakes and flows, thereby creating texturally distinct kimberlite units. Efforts to fully understand the processes responsible for the explosive eruption of kimberlite magmas have been hindered by the widespread alteration and crustal contamination of most volcaniclastic kimberlites. To address this issue, we have undertaken a detailed petrographic and mineral chemical study of fresh (i.e. minimally altered) pyroclastic and hypabyssal kimberlites (HK) from the ca. 55-56 Ma A154 North and South kimberlite pipes in the Diavik Mine (Lac de Gras, Canada). These localities host exceptionally fresh kimberlites and are therefore ideally suited to this study.Kimberlite emplacement at A154 North and South initiated with the intrusion of hypabyssal kimberlite (external dykes), and was followed by the explosive formation of kimberlite pipes and volcaniclastic kimberlite infill. Subsequent kimberlite magmas intruded the volcaniclastic kimberlite units forming multiple cross-cutting, internal dykes. The studied volcaniclastic units feature abundant rounded magmaclasts and massive textures, suggestive of primary deposits. These units are classified as pyroclastic kimberlites (PK).Pyroclastic and hypabyssal kimberlite units at Diavik exhibit subtle mineral compositional differences. Samples from both internal HK units and PK units feature identical compositions for liquidus olivine rims (Mg# = 90.5 ± 0.1 and 90.7 ± 0.2, respectively), with a marginally lower Mg# of 90.2 ± 0.2 in olivine rims from the external HK dykes. Similarly, early-formed chromite compositions are the same for internal HK and PK units (Cr# = 79.1 ± 3.4 and 78.3 ± 5.7; Mg# = 60.0 ± 1.3 and 60.0 ± 2.2), but, differ in the external HK units (Cr# = 86.9 ± 2.7; Mg# = 52.8 ± 1.9). The internal HK and PK units also exhibit lower carbonate contents than the internal HK units. These compositional differences indicate that the external dykes were probably derived from slightly different primitive melt compositions to those parental to the internal HK and PK units. Spinel evolutionary trends from chromite to magnesian ulvӧspinel-magnetite (MUM) compositions are indistinguishable in internal HK and PK samples (Fe3+# = 47.2 ± 5.8 and 49.7 ± 9.3; Cr# = 25.7 ± 11.0 and 17.0 ± 14.0). These results demonstrate that the primitive melt compositions and early magmatic evolution processes are identical for the internal kimberlite units, regardless of whether the kimberlite melts erupted explosively or were emplaced as shallow intrusions. However, magmaclasts in the PK units contain higher abundances of phlogopite (<52 vol. %) and lower quantities of carbonate (<4 vol. %) than the groundmass of the hypabyssal kimberlite samples (<2 vol. % and 25–65 vol. %, respectively). This indicates that the explosively erupted magmas featured higher H2O/CO2 ratios. In contrast, abundant carbonates, including dolomite, in the internal HK samples indicate that CO2, and therefore low H2O/CO2 ratios, were retained during the emplacement of this magma, which likely prevented phlogopite crystallisation. Lower K and Rb whole-rock compositions for internal HK samples compared to PK samples, are attributed to the removal of these components in late-stage kimberlitic fluids, as indicated by hydrothermal alteration of the adjacent volcaniclastic kimberlite units. The above results clearly rule out variations in primitive melt composition and melt evolution trajectories as a primary control on the explosive behaviour of the kimberlite magmas at Diavik. Controls on kimberlite explosivity at Diavik are likely due to external factors, such as local stress regimes, the availability of groundwater (i.e. phreatomagmatism) and differing magma supply rates.

What is a Kimberlite? Petrology and Mineralogy of Hypabyssal Kimberlites

Hypabyssal kimberlites are subvolcanic intrusive rocks crystallised from mantle-derived magmas poor in SiO2 and rich in CO2 and H2O. They are complex, hybrid rocks containing significant amounts of mantle-derived fragments, primarily olivine with rare diamonds, set in a matrix of essentially magmatic origin. Unambiguous identification of kimberlites requires careful petrographic examination combined with mineral compositional analyses. Melt inclusion studies have shown that kimberlite melts contain higher alkali concentrations than previously thought but have not clarified the ultimate origin of these melts. Because of the hybrid nature of kimberlites and their common hydrothermal alteration by fluids of controversial origin (magmatic and/or crustal), the composition of primary kimberlite melts remains unknown.

Kimberlite and carbonatite dykes within the Premier diatreme root (Cullinan Diamond Mine, South Africa): New insights to mineralogical-genetic classifications and magma CO2 degassing

The ca. 1153 Ma Premier kimberlite pipe on the Kaapvaal craton has been intruded by late-stage kimberlite and carbonatite magmas forming discrete 0.5 to 5 m wide dykes within the lower diatreme. On the basis of petrography and geochemistry, the fresh kimberlite dykes represent archetypal monticellite phlogopite kimberlite of Group-1 affinity. Their mineral compositions, however, show marked deviations from trends that are typically considered as diagnostic for Group-1 kimberlite in mineralogical-genetic classification schemes for volatile-rich ultramafic rocks. Groundmass spinel compositions are transitional between magnesian ulvöspinel (a Group-1 kimberlite hallmark feature) and titanomagnetite trends, the latter being more diagnostic for lamproite, orangeite (formerly Group-2 kimberlite), and aillikite. The Premier kimberlite dykes contain groundmass phlogopite that evolves by Al- and Ba-depletion to tetraferriphlogopite, a compositional trend that is more typical for orangeite and aillikite. Although high-pressure cognate and groundmass ilmenites from the Premier hypabyssal kimberlites are characteristically Mg-rich (up to 15 wt% MgO), they contain up to 5 wt% MnO, which is more typical for carbonate-rich magmatic systems such as aillikite and carbonatite. Manganese-rich groundmass ilmenite also occurs in the Premier carbonatite dykes, which are largely devoid of mantle-derived crystal cargo, suggesting a link to the kimberlite dykes by fractionation processes involving development of residual carbonate-rich melts and fluids. Although mineralogical-genetic classification schemes for kimberlites and related rocks may provide an elegant approach to circumvent common issues such as mantle debris entrainment, many of the key mineral compositional trends are not as robust for magma type identification as previously thought.Utilizing an experimentally constrained CO2-degassing model, it is suggested that the Premier kimberlite dykes have lost between 10 and 20 wt% CO2 during magma ascent through the cratonic lithosphere, prior to emplacement near the Earth's surface. Comparatively low fO2 values down to −5.6 ∆NNO are obtained for the kimberlite dykes when applying monticellite and perovskite oxybarometry, which probably reflects significant CO2 degassing during magma ascent rather than the original magma redox conditions and those of the deep upper mantle source. Thus, groundmass mineral oxybarometry may have little value for the prediction of the diamond preservation potential of ascending kimberlite magmas.After correction for olivine fractionation and CO2-loss, there remains a wide gap between the primitive kimberlite and carbonatite melt compositions at Premier, which suggests that these magma types cannot be linked by variably low degrees of partial melting of the same carbonated peridotite source in the deep upper mantle. Instead, fractionation processes produced carbonate-rich residual melts/fluids from ascending kimberlite magma, which led to the carbonatite dykes within Premier pipe.

Geochemistry and geodynamic implications on the source of Paraná-Etendeka Large Igneous Province evidenced by the 128 Ma Rosário-6 kimberlite, southern Brazil

The Rosário-6 is a non-diamondiferous hypabyssal kimberlite located above the Rio de la Plata craton and near the south-eastern edge of the Paraná Basin, in southern Brazil.It is petrographically an inequigranular texture, macrocrystal kimberlite, fresh and the groundmass exhibits a microporphyritic texture and round megacrysts of olivine, which are derived from disaggregated mantle xenoliths. Olivine is also present as macrocrysts, microphenocrysts and in the groundmass together with phlogopite and apatite. These microphenocrysts are immersed in a groundmass of olivine, monticellite, phlogopite, CaTiO3-perovskite, apatite, Mg-chromite and Mg-ulvöspinel and melilite. A mesostasis assemblage of phlogopite, melilite, soda melilite, akermanite and calcium carbonate is segregated from the groundmass. Its geochemical signature is similar to those of transitional kimberlites of Kaapvaal Craton, South Africa, and the UPb ages of ~ 128 Ma on perovskite reveal that Rosário-6 kimberlite post-dates the main pulse of volcanism in the Paraná-Etendeka Large Igneous Province (LIP). The high Ti content of some minerals, such as Mg-chromite, Mg-ulvöspinel, phlogopite and melilite, and the presence of perovskite suggest a Ti-rich source. The petrographic, geochemical and isotopic data indicate that the Rosário-6 kimberlite source is a depleted mantle metasomatized by H2O-rich fluids, CO2-rich and silicate melts derived from the recycling of an ancient subducted oceanic plate (eclogite) before the South Atlantic opening. Although several authors indicate the influence of Tristan da Cunha plume for the generation of alkaline magmatism associated to the Paraná-Etendeka flood basalts, our data demonstrates that Tristan da Cunha plume has no chemical contribution to the generation of Rosário-6 kimberlite, except by its thermal influence.

New constraints on archetypal South African kimberlite petrogenesis from quenched glass-rich melt inclusions in olivine megacrysts

The evaluation of primary kimberlite compositions is hindered by significant melt modifications during ascent through the lithosphere by entrainment of xenolithic material, volatile degassing, and near surface alteration. Consequently, hypabyssal kimberlite emplaced in the upper crust may not provide a true reflection of the primary kimberlite magma. This contribution places new constraints on kimberlite melt composition by providing an assessment of quenched glass-rich polymineralic melt inclusions hosted in olivine megacrysts from the Monastery kimberlite, South Africa. Melt inclusions predominantly contain variable proportions of euhedral or skeletal grains of calcite, phlogopite, spinel, perovskite, serpentine, and fresh to devitrified glass. Estimates of the bulk compositions of melt inclusions, and the compositions of crystalline phases present therein, are compatible to those of hypabyssal kimberlites worldwide and show a volatile-rich (CO2 + H2O ~10–17 wt%) carbonated silicate (SiO2 ~27–41 wt%) composition. The glass component has a Si-Mg-Fe-rich and largely CaO-, K2O- and TiO2-free major element composition and is REE-depleted. It also contains approximately 10 wt% H2O but is CO2−free. The glass represents a residual melt that existed after crystallization of the observed mineral assemblage. From some, but not all melt inclusions, apophyses radiate outwards. These fractures typically contain partially devitrified glass that is compositionally identical to the fresh residual glass within the melt inclusions, indicating fracture formation during decompression of the hosting megacryst and at a stage after the melt had evolved. These features are consistent with a trapping of the melt inclusions at high pressure, prior to kimberlite ascent to the surface, in the SCLM at a depth corresponding to 4.5–6 GPa. Textures and compositions of phases within the melt inclusions represent stages of the kimberlite melt and magma evolution. They provide evidence in support of high-pressure experimental studies suggesting a carbonated silicate primary melt rather than a carbonatite. Furthermore, the composition of fresh glass in the melt inclusions, which is compositionally similar to serpentine, suggests that much groundmass serpentine in hypabyssal kimberlites may have formed from similar silicate melt or devitrified glass.

Letšeng diamond mine, Lesotho: a variant of Kimberley-type pyroclastic kimberlite emplacement

The Letseng Diamond Mine comprises two ~91 Ma kimberlite pipes. An update of the geology is presented based on the 2012–2017 detailed investigation of open pit exposures and all available drillcores which included mapping, logging and petrography. Each of the steep-sided volcanic pipes comprises a number of phases of kimberlite with contrasting diamond contents which were formed by the emplacement of at least four batches of mantle-derived magma. The resulting range of textures includes resedimented volcaniclastic kimberlite (RVK), Kimberley-type pyroclastic kimberlite (KPK), coherent kimberlite (CK) and minor amounts of hypabyssal kimberlite (HK). The pipes are compared with KPK occurrences from southern Africa and worldwide. Many features of the Letseng pipes are similar to KPK infilled pipes particularly those of the widespread Cretaceous kimberlite province of southern Africa. The differences displayed at Letseng compared to other large KPK pipe infills described from around the world are attributed to the marginal or melnoitic nature of the magma and the upper diatreme to crater setting of the Letseng pipes, where processes become extrusive. It is concluded that the pipes comprise a variant of Kimberley-type pyroclastic kimberlite emplacement. The classification of many of the Letseng rocks as KPK is important for developing the internal geology of the pipes as well as for predicting the distribution of diamonds within the bodies.

Geology and resource development of the Kelvin kimberlite pipe, Northwest Territories, Canada

The early Cambrian to late Neoproterozoic Kelvin kimberlite pipe is located in the southeast of the Archean Slave Craton in northern Canada, eight km northeast of the Gahcho Kue diamond mine. Kelvin was first discovered in 2000 by De Beers Canada. Subsequent exploration undertaken by Kennady Diamonds Inc. between 2012 and 2016 resulted in the discovery of significant thicknesses of volcaniclastic kimberlite that had not previously been observed. Through extensive delineation drilling Kelvin has been shown to present an atypical, steep-sided inclined L-shaped pipe-like morphology with an overall dip of 15 to 20°. With a surface expression of only 0.08 ha Kelvin dips towards the northwest before turning north. The body (which remains open at depth) has been constrained to a current overall strike length of 700 m with varying vertical thickness (70 to 200 m) and width (30 to 70 m). Detailed core logging, petrography and microdiamond analysis have shown that the pipe infill comprises several phases of sub-horizontally oriented kimberlite (KIMB1, KIMB2, KIMB3, KIMB4, KIMB7 and KIMB8) resulting from multiple emplacement events. The pipe infill is dominated by Kimberley-type pyroclastic kimberlite or “KPK”, historically referred to as tuffisitic kimberlite breccia or “TKB”, with less common hypabyssal kimberlite (HK) and minor units with textures transitional between these end-members. An extensive HK sheet complex surrounds the pipe. The emplacement of Kelvin is believed to have been initiated by intrusion of this early sheet system. The main pipe-forming event and formation of the dominant KPK pipe infill, KIMB3, was followed by late stage emplacement of additional minor KPK and a hypabyssal to transitional-textured phase along the upper contact of the pipe, cross-cutting the underlying KIMB3. Rb-Sr age dating of phlogopite from a late stage phase has established model ages of 531 ± 8 Ma and 546 ± 8 Ma. Texturally and mineralogically, the Kelvin kimberlite is similar to other KPK systems such as the Gahcho Kue kimberlites and many southern African kimberlites; however, the external morphology, specifically the sub-horizontal inclination of the pipe, is unique. The morphology of Kelvin and the other kimberlites in the Kelvin-Faraday cluster defines a new type of exploration target, one that is likely not unique to the Kennady North Project area. Extensive evaluation work by Kennady Diamonds Inc. has resulted in definition of a maiden Indicated Mineral Resource for Kelvin of 8.5 million tonnes (Mt) of kimberlite at an average grade of 1.6 carats per tonne (cpt) with an average diamond value of US$ 63 per carat (ct).

Punctuated, long-lived emplacement history of the Renard 2 kimberlite, Canada, revealed by new high precision U-Pb groundmass perovskite dating

Kimberlites are rare volatile-rich ultramafic magmas thought to erupt in short periods of time (<1 Myr) but there is a growing body of evidence that the emplacement history of a kimberlite can be significantly more protracted. In this study we report a detailed geochronology investigation of a single kimberlite pipe from the Renard cluster in north-central Quebec. Ten new high precision ID-TIMS (isotope dilution – thermal ionization mass spectrometry) U-Pb groundmass perovskite dates from the main pipe-infilling kimberlites and several small hypabyssal kimberlites from the Renard 2 pipe indicate kimberlite magmatism lasted at least ~20 Myr. Two samples of the main pipe-infilling kimberlites yield identical weighted mean 206Pb/238U perovskite dates with a composite date of 643.8 ± 1.0 Myr, interpreted to be the best estimate for main pipe emplacement. In contrast, six hypabyssal kimberlite samples yielded a range of weighted mean 206Pb/238U perovskite dates between ~652-632 Myr. Multiple dates determined from these early-, syn- and late-stage small hypabyssal kimberlites in the Renard 2 pipe demonstrate this rock type (commonly used to date kimberlites) help to constrain the duration of kimberlite intrusion history within a pipe but do not necessarily reliably record the emplacement age of the main diatreme in the Renard cluster. Our results provide the first robust geochronological data on a single kimberlite that confirms the field relationships initially observed by Wagner (1914) and Clement (1982); the presence of antecedent (diatreme precursor) intrusions, contemporaneous (syn-diatreme) intrusions, and consequent (post-diatreme) cross-cutting intrusions. The results of this detailed U-Pb geochronology study indicate a single kimberlite pipe can record millions of years of magmatism, much longer than previously thought from the classical viewpoint of a rapid and short-duration emplacement history.

Geology of the Renard 65 kimberlite pipe, Québec, Canada

Renard 65, a diamondiferous pipe in the Neoproterozoic Renard kimberlite cluster (Quebec, Canada), is a steeply-dipping and downward-tapering diatreme comprised of three pipe-filling units: kimb65a, kimb65b, and kimb65d. The pipe is surrounded by a marginal and variably-brecciated country rock aureole and is crosscut by numerous hypabyssal dykes: kimb65c. Extensive petrographic and mineralogical characterization of over 700 m of drill core from four separate drill holes, suggests that Renard 65 is a Group I kimberlite, mineralogically classified as phlogopite kimberlite and serpentine-phlogopite kimberlite. Kimb65a is a massive volcaniclastic kimberlite dominated by lithic clasts, magmaclasts, and discrete olivine macrocrysts, hosted within a fine-grained diopside and serpentine-rich matrix. Kimb65b is massive, macrocrystic, coherent kimberlite with a groundmass assemblage of phlogopite, spinel, perovskite, apatite, calcite, serpentine and rare monticellite. Kimb65c is a massive, macrocrystic, hypabyssal kimberlite with a groundmass assemblage of phlogopite, serpentine, calcite, perovskite, spinel, and apatite. Kimb65d is massive volcaniclastic kimberlite with localized textures that are intermediate between volcaniclastic and coherent, with tightly packed magmaclasts separated by a diopside- and serpentine-rich matrix. Lithic clasts of granite-gneiss in kimb65a are weakly reacted, with partial melting of feldspars and crystallization of richterite and actinolite. Lithic clasts in kimb65b and kimb65d are entirely recrystallized to calcite + serpentine/chlorite + pectolite and display inner coronas of diopside-aegirine and an outer corona of phlogopite. Compositions are reported for all minerals in the groundmass of coherent kimberlites, magmaclasts, interclast matrices, and reacted lithic clasts. The Renard 65 rocks are texturally classified as Kimberley-type pyroclastic kimberlites and display transitional textures. The kimberlite units are interpreted to have formed in three melt batches based on their distinct spinel chemistry: kimb65a, kimb65b and kimb65d. We note a strong correlation between the modal abundances of lithic clasts and the textures of the kimberlites, where increasing modal abundances of granite/gneiss are observed in kimberlites with increasingly fragmental textures.

Characterisation of primary and secondary carbonates in hypabyssal kimberlites: an integrated compositional and Sr-isotopic approach

Carbonates in fresh hypabyssal kimberlites worldwide have been studied to understand their origin [i.e. primary magmatic (high T) versus deuteric (‘low T’) versus hydrothermal/alteration (‘low T’)] and identify optimal strategies for petrogenetic studies of kimberlitic carbonates. The approach presented here integrates detailed textural characterisation, cathodoluminescence (CL) imaging, in situ major- and trace-element analysis, as well as in situ Sr-isotope analysis. The results reveal a wide textural diversity. Calcite occurs as fine-grained groundmass, larger laths, segregations, veins or as a late crystallising phase, replacing olivine or early carbonates. Different generations of carbonates commonly coexist in the same kimberlite, each one defined by a characteristic texture, CL response and composition (e.g., variable Sr and Ba concentrations). In situ Sr isotope analysis revealed a magmatic signature for most of the carbonates, based on comparable 87Sr/86Sr values between these carbonates and the coexisting perovskite, a robust magmatic phase. However, this study also shows that in situ Sr isotope analysis not always allow distinction between primary (i.e., magmatic) and texturally secondary carbonates within the same sample. Carbonates with a clear secondary origin (e.g., late-stage veins) occasionally show the same moderately depleted 87Sr/86Sr ratios of primary carbonates and coexisting perovskite (e.g., calcite laths-shaped crystals with 87Sr/86Sr values identical within uncertainty to those of vein calcite in the De Beers kimberlite). This complexity emphasises the necessity of integrating detailed petrography, geochemical and in situ Sr isotopic analyses for an accurate interpretation of carbonate petrogenesis in kimberlites. Therefore, the complex petrogenesis of carbonates demonstrated here not only highlights the compositional variability of kimberlites, but also raises concerns about the use of bulk-carbonate C-O isotope studies to characterise the parental melt compositions. Conversely, our integrated textural and in situ study successfully identifies the most appropriate (i.e. primary) carbonates for providing constraints on the isotopic parameters of parental kimberlite magmas.

Geology of the Renard 2 pipe to 1000 m depth, Renard Mine, Québec, Canada: insights into Kimberley-type pyroclastic kimberlite emplacement

The Renard 2 pipe is currently the deepest-drilled and most extensively studied kimberlite body in the Renard cluster, central Quebec, Canada, forming the major component of the Mineral Resource of Stornoway Diamond Corporation’s Renard Mine. Renard 2 is infilled with two distinct kimberlite units that exhibit Kimberley-type pyroclastic kimberlite and related textures. Hypabyssal kimberlite also occurs as smaller cross-cutting sheets and irregular intrusions. The units are distinguished by their rock textures, groundmass mineral assemblages, olivine macrocryst size distributions and replacement products, mantle and country rock xenolith contents, whole rock geochemical signatures, bulk densities and diamond grades. These differences are interpreted to reflect different mantle ascent and near-surface emplacement processes and are here demonstrated to be vertically continuous from present surface to over 1000 m depth. The distinctive petrological features together with sharp, steep and cross-cutting internal contact relationships, show that each unit was formed from a separate batch of mantle-derived kimberlite magma, and was completely solidified before subsequent emplacement of the later unit. The mineralogy and textures of the ultra-fine-grained interclast matrix are consistent with those described at numerous Kimberley-type pyroclastic kimberlite localities around the world and are interpreted to reflect rapid primary crystallization during emplacement of separate kimberlite magmatic systems. The units of fractured and brecciated country rock surrounding the main kimberlite pipe contain kimberlite-derived material including carbonate providing evidence of subsurface brecciation. Together these data show that Renard 2 represents the deeper parts of a Kimberley-type pyroclastic kimberlite pipe system and demonstrates that their diagnostic features result from magmatic crystallisation during subsurface volcanic emplacement processes.

Origin of complex zoning in olivine from diverse, diamondiferous kimberlites and tectonic settings: Ekati (Canada), Alto Paranaiba (Brazil) and Kaalvallei (South Africa)

Olivine in kimberlites can provide unique insights into magma petrogenesis, because it is the most abundant xenocrystic phase and a stable magmatic product over most of the liquid line of descent. In this study we examined the petrography and chemistry of olivine in kimberlites from different tectonic settings, including the Slave craton, Canada (Ekati: Grizzly, Koala), the Brasilia mobile belt (Limpeza-18, Tres Ranchos-04), and the Kaapvaal craton, South Africa (Kaalvallei: Samada, New Robinson). Olivine cores display a wide range of compositions (e.g., Mg# = 78–95). The similarity in olivine composition, resorption of core zones and inclusions of mantle-derived phases, indicates that most olivine cores originated from the disaggregation of mantle peridotites, including kimberlite-metasomatised lithologies (i.e. sheared lherzolites and megacrysts). Olivine rims typically show a restricted range of Mg#, with decreasing Ni and increasing Mn and Ca contents, a characteristic of kimberlitic olivine worldwide. The rims host inclusions of groundmass minerals, which implies crystallisation just before and/or during emplacement. There is a direct correlation between olivine rim composition and groundmass mineralogy, whereby high Mg/Fe rims are associated with carbonate-rich kimberlites, and lower Mg/Fe rims are correlated with increased phlogopite and Fe-bearing oxide mineral abundances. There are no differences in olivine composition between explosive (Grizzly) and hypabyssal (Koala) kimberlites. Olivine in kimberlites also displays transitional zones and less common internal zones, between cores and rims. The diffuse transitional zones exhibit intermediate compositions between cores and rims, attributed to partial re-equilibration of xenocrystic cores with the ascending kimberlite melt. In contrast, internal zones form discrete layers with resorbed margins and restricted Mg# values, but variable Ni, Mn and Ca concentrations, which indicates a discrete crystallization event from precursor kimberlite melts at mantle depths. Overall, olivine exhibits broadly analogous zoning in kimberlites worldwide. Variable compositions for individual zones relate to different parental melt compositions rather than variations in tectonic setting or emplacement mechanism.

A new approach to reconstructing the composition and evolution of kimberlite melts: A case study of the archetypal Bultfontein kimberlite (Kimberley, South Africa)

The compositions of kimberlite melts at depth and upon emplacement in the upper crust remain elusive. This can be attributed to the unquantified effects of multiple processes, such as alteration, assimilation, xenocryst contamination, and fractional crystallisation. The inability to accurately constrain the composition and physical properties of kimberlite melts prevents a comprehensive understanding of their petrogenesis.To improve constraints on the compositions of kimberlite melts, we have combined modal analysis including the discrimination of xenocrystic from magmatic phases, with mineral chemistry determinations to reconstruct a whole-rock composition. We apply this approach to a sample of “fresh” macrocrystic hypabyssal kimberlite (sample BK-1) from the Bultfontein mine (Kimberley, South Africa). The accuracy of this whole-rock reconstruction method is validated by the similarity between reconstructed and measured whole-rock compositions. A series of corrections are then applied to account for the effects of post-emplacement serpentinisation, pre-emplacement olivine crystallisation, and the inclusion and assimilation of mantle material. This approach permits discernment of melt compositions at different stages of kimberlite evolution.The primitive melt parental to the Bultfontein kimberlite is estimated to contain 17.4–19.0 wt% SiO2, 20.2–22.8 wt% MgO, 20.9–21.9 wt% CaO, 2.1–2.3 wt% P2O5, 1.2–1.4 wt% TiO2, 0.9–1.1 wt% Al2O3, and 0.6–0.7 wt% K2O, and has a Mg# of 83.4–84.4. Primary volatile contents (i.e., after an attempt to account for volatile loss) are tentatively estimated at ~2.1–2.2 wt% H2O and ~22.9–25.4 wt% CO2. This composition is deficient in SiO2, MgO and H2O, but enriched in CaO and CO2 compared with most previous estimates of primitive kimberlite melts. We suggest that the primitive melt parental to the Bultfontein kimberlite was a transitional silicate-carbonate melt, which was progressively enriched in SiO2, MgO, Al2O3, Cr2O3, and Na2O through the assimilation of lithospheric mantle material. Comparisons with experimentally produced low-degree melts of carbonated lherzolite indicate that the Bultfontein kimberlite could have formed by ~0.5% melting of asthenospheric mantle at ~6.0–8.6 GPa (i.e., ~190–285 km) and ~1400–1500 °C. The low calculated Na2O contents (<0.2 wt%), which are inconsistent with derivation from low-degree melting of lherzolite, suggest that an alkali-bearing, volatile-rich fluid was exsolved during ascent or released after emplacement, and subsequently removed.

Formation and evolution of hypabyssal kimberlites from the Siberian craton: Part 1 – New insights from cathodoluminescence of the carbonates

Cathodoluminescence (CL) microscopy studies were performed to unravel internal structures and zonations of carbonates from 6 unaltered hypabyssal kimberlites from several Mesozoic - Paleozoic kimberlite pipes of the Siberian craton. Different generations of prograde and retrograde carbonate grains/domains were identified. Most investigated kimberlite samples are unusually fresh and contain abundant unaltered olivine. Only minor amounts of carbonates of a primary magmatic origin were found; most carbonates are of secondary origin formed during late metasomatic or hydrothermal events. A rare carbonatite xenolith discovered in the Malokuonapskaya kimberlite contains abundant apatite and monazite; an apatite inclusion was detected in one zircon grain. Some apatites contain oriented lamellae of monazite. Early studies of the carbonate minerals in this xenolith demonstrated a trace amount of Sr; all these characteristics are typical of carbonatite.We conclude that carbonate minerals play a significant role in the evolution of hypabyssal kimberlites of the Siberian craton. The CL-studies of these minerals provide significant insights into their growth history and help to differentiate different parageneses, as either primary or secondary. Carbonatite xenoliths are of vital significance for the discussion of a possible genetic interrelation of kimberlite and carbonatite melts in the mantle. The present results may serve as a starting point for future studies of these carbonate minerals, using electron-microprobe, micro-PIXE or other high-resolution techniques. Future in-situ oxygen and carbon isotope analyses, as well as inclusions of melt, fluid, and minerals in different carbonate domains, will add essential new data with which to further unravel the genesis of the kimberlite-carbonatite association.

The Late Cretaceous diamondiferous pyroclastic kimberlites from the Fort à la Corne (FALC) field, Saskatchewan craton, Canada: Petrology, geochemistry and genesis

The Late Cretaceous (ca. 100Ma) diamondiferous Fort à la Corne (FALC) kimberlite field in the Saskatchewan (Sask) craton, Canada, is one of the largest known kimberlite fields on Earth comprising essentially pyroclastic kimberlites. Despite its discovery more than two decades ago, petrological, geochemical and petrogenetic aspects of the kimberlites in this field are largely unknown. We present here the first detailed petrological and geochemical data combined with reconnaissance Nd isotope data on drill-hole samples of five major kimberlite bodies. Petrography of the studied samples reveals that they are loosely packed, clast-supported and variably sorted, and characterised by the presence of juvenile lapilli, crystals of olivine, xenocrystal garnet (peridotitic as well as eclogitic paragenesis) and Mg-ilmenite. Interclast material is made of serpentine, phlogopite, spinel, carbonate, perovskite and rutile. The mineral compositions, whole-rock geochemistry and Nd isotopic composition (Nd: +0.62 to −0.37) are indistinguishable from those known from archetypal hypabyssal kimberlites. Appreciably lower bulk-rock CaO (mostly <5wt%) and higher La/Sm ratios (12–15; resembling those of orangeites) are a characteristic feature of these rocks. Their geochemical composition excludes any effects of significant crustal and mantle contamination/assimilation. The fractionation trends displayed suggest a primary kimberlite melt composition indistinguishable from global estimates of primary kimberlite melt, and highlight the dominance of a kimberlite magma component in the pyroclastic variants. The lack of Nb-Ta-Ti anomalies precludes any significant role of subduction-related melts/fluids in the metasomatism of the FALC kimberlite mantle source region. Their incompatible trace elements (e.g., Nb/U) have OIB-type affinities whereas the Nd isotope composition indicates a near-chondritic to slightly depleted Nd isotope composition. The Neoproterozoic (~0.6–0.7Ga) depleted mantle (TDM) Nd model ages coincide with the emplacement age (ca. 673Ma) of the Amon kimberlite sills (Baffin Island, Rae craton, Canada) and have been related to upwelling protokimberlite melts during the break-up of the Rodinia supercontinent and its separation from Laurentia (North American cratonic shield). REE inversion modelling for the FALC kimberlites as well as for the Jericho (ca. 173Ma) and Snap Lake (ca. 537Ma) kimberlites from the neighbouring Slave craton, Canada, indicate all of their source regions to have been extensively depleted (~24%) before being subjected to metasomatic enrichment (1.3–2.2%) and subsequent small-degree partial melting. These findings are similar to those previously obtained on Mesozoic kimberlites (Kaapvaal craton, southern Africa) and Mesoproterozoic kimberlites (Dharwar craton, southern India). The striking similarity in the genesis of kimberlites emplaced over broad geological time and across different supercontinents of Laurentia, Gondwanaland and Rodinia, highlights the dominant petrogenetic role of the sub-continental lithosphere. The emplacement of the FALC kimberlites can be explained both by the extensive subduction system in western North America that was established at ca. 150Ma as well as by far-field effects of the opening of the North Atlantic ocean during the Late Cretaceous.