Hydrophobic Scaffold Research Articles

3D Porous Polycaprolactone with Chitosan-Graft-PCL Modified Surface for In Situ Tissue Engineering

Tissue engineering has emerged as a promising approach for improved regeneration of native tissue and could increase the quality of life of many patients. However, the treatment of injured tissue transitions is still in its early stages, relying primarily on a purely physical approach in medical surgery. A biodegradable implant with a modified surface that is capable of biological active protein delivery via a nanoparticulate release system could advance the field of musculoskeletal disorder treatments enormously. In this study, interconnected 3D macroporous scaffolds based on Polycaprolactone (PCL) were fabricated in a successive process of blending, annealing and leaching. Blending with varying parts of Polyethylene oxide (PEO), NaCl and (powdered) sucrose and altering processing conditions yielded scaffolds with a huge variety of morphologies. The resulting unmodified hydrophobic scaffolds were modified using two graft polymers (CS-g-PCLx) with x = 29 and 56 (x = PCL units per chitosan unit). Due to the chitosan backbone hydrophilicity was increased and a platform for a versatile nanoparticulate release system was introduced. The graft polymers were synthesized via ring opening polymerization (ROP) of ε-Caprolactone using hydroxy groups of the chitosan backbone as initiators (grafting from). The suspected impact on biocompatibility of the modification was investigated by in vitro cell testing. In addition, the CS-g-PCL modification opened up the possibility of Layer by Layer (LbL) coating with alginate (ALG) and TGF-β3-loaded chitosan tripolyphosphate (CS-TGF-β3-TPP) nanoparticles. The subsequent release study showed promising amounts of growth factor released regarding successful in vitro cell differentiation and therefore could have a possible therapeutic impact.

Hydrophobic assembly of molecular catalysts at the gas-liquid-solid interface drives highly selective CO2 electromethanation.

Molecular catalysts offer tunable active and peripheral sites, rendering them ideal model systems to explore fundamental concepts in catalysis. However, hydrophobic designs are often regarded as detrimental for dissolution in aqueous electrolytes. Here we show that established cobalt terpyridine catalysts modified with hydrophobic perfluorinated alkyl side chains can assemble at the gas-liquid-solid interfaces on a gas diffusion electrode. We find that the self-assembly of these perfluorinated units on the electrode surface results in a catalytic system selective for electrochemical CO2 reduction to CH4, whereas every other cobalt terpyridine catalyst reported previously was only selective for CO or formate. Mechanistic investigations suggest that the pyridine units function as proton shuttles that deliver protons to the dynamic hydrophobic pocket in which CO2 reduction takes place. Finally, integration with fluorinated carbon nanotubes as a hydrophobic conductive scaffold leads to a Faradaic efficiency for CH4 production above 80% at rates above 10 mA cm-2-impressive activities for a molecular electrocatalytic system.

Confined Water Dynamics in the Scaffolds of Polylactic Acid.

Resorbable polylactic acid (PLA) ultrathin fibers have been applied as scaffolds for tissue engineering applications due to their micro- and nanoporous structure that favor cell adhesion, besides inducing cell proliferation and upregulating gene expression related to tissue regeneration. Incorporation of multiwalled carbon nanotubes into PLA fibers has been reported to increase the mechanical properties of the scaffold, making them even more suitable for tissue engineering applications. Ideally, scaffolds should be degraded simultaneously with tissue growth. Hydration and swelling are factors related to scaffold degradation. Hydration would negatively impact the mechanical properties since PLA shows hydrolytic degradation. Water absorption critically affects the catalysis and allowance of the hydrolysis reactions. Moreover, either mass transport and chemical reactions are influenced by confined water, which is an unexplored subject for PLA micro- and nanoporous fibers. Here, we probe and investigate confined water onto highly porous PLA microfibers containing few amounts of incorporated carbon nanotubes by Fourier transform infrared (FTIR) spectroscopy. A hydrostatic pressure was applied to the fibers to enhance the intermolecular interactions between water molecules and C=O groups from polyester bonds, which were evaluated over the wavenumber between 1600 and 2000 cm-1. The analysis of temperature dependence of FTIR spectra indicated the presence of confined water which is characterized by a non-Arrhenius to Arrhenius crossover at T0 = 190 K for 1716 and 1817 cm-1 carbonyl bands of PLA. These bands are sensitive to a hydrogen bond network of confined water. The relevance of our finding relies on the challenge detecting confined water in hydrophobic cavities as in the PLA one. To the best of our knowledge, we present the first report referring the presence of confined water in a hydrophobic scaffold as PLA for tissue engineering. Our findings can provide new opportunities to understand the role of confined water in tissue engineering applications. For instance, we argue that PLA degradation may be affected the most by confined water. PLA degradation involves hydrolytic and enzymatic degradation reactions, which can both be sensitive to changes in water properties.

Regulating ionic transport and interface chemistry via high-dielectric BaTiO3 porous scaffolds for aqueous Zn-ion batteries

Rechargeable aqueous Zn-ion batteries (AZIBs) are gaining considerable attention as alternatives to Li-ion batteries owing to their excellent safety, high energy density, low cost, and environmental friendliness. However, their Zn anodes suffer from severe dendritic growth, the hydrogen evolution reaction (HER), and corrosion, which limit the commercialization of AZIBs. To address this challenge, we designed a solution involving the development of a high-dielectric hydrophobic BaTiO3 (BTO) porous scaffold layer that is strategically applied to the Zn surface. This BTO layer effectively impedes the dendritic growth of Zn. The distinct polarizability of the BTO layer actively diminishes the electric-field gradient, thereby minimizing the interaction between the H2O molecules and the Zn surface. This phenomenon helps suppress dendritic growth, thus ensuring the uniform deposition of Zn and preventing the HER. The electrochemical performance of a symmetric cell containing the Zn@BTO electrode exhibits low-voltage polarization and stable charge–discharge performance for up to 500 h. In addition, a full-cell AZIB containing a high-capacity α-MnO2 cathode and Zn@BTO anode exhibits good rate capability and a long life of up to 500 cycles. This study demonstrates the development of a cost-effective dendrite-free Zn anode integrated with a highly dielectric hydrophobic BTO porous scaffold layer as a stable Zn–electrolyte interface layer for high-performance AZIBs.

Structure-Based Identification of Organoruthenium Compounds as Nanomolar Antagonists of Cannabinoid Receptors.

Metal complexes exhibit a diverse range of coordination geometries, representing novel privileged scaffolds with convenient click types of preparation inaccessible for typical carbon-centered organic compounds. Herein, we explored the opportunity to identify biologically active organometallic complexes by reverse docking of a rigid, minimum-size octahedral organoruthenium scaffold against thousands of protein-binding pockets. Interestingly, cannabinoid receptor type 1 (CB1) was identified based on the docking scores and the degree of overlap between the docked organoruthenium scaffold and the hydrophobic scaffold of the cocrystallized ligand. Further structure-based optimization led to the discovery of organoruthenium complexes with nanomolar binding affinities and high selectivity toward CB2. Our work indicates that octahedral organoruthenium scaffolds may be advantageous for targeting the large and hydrophobic binding pockets and that the reverse docking approach may facilitate the discovery of novel privileged scaffolds, such as organometallic complexes, for exploring chemical space in lead discovery.

Evaluating impacts of bambusuril pocket size and sterics on anion binding trends using ChemFET sensors.

Chemically-sensitive Field Effect Transistors (ChemFETs) are a useful tool to evaluate aqueous anion affinity of hydrophobic supramolecular scaffolds. More specifically, ChemFETs can be used to probe impacts of receptor modification to aqueous anion affinity. In this study, ChemFETs are used to evaluate the anion affinity of both dodeca-n-butyl bambus[6]uril and dodecabenzyl bambus[6]uril to assess steric effects in the chemical selectivity of the sensor membrane. The ChemFETs were evaluated through a series of common anions in the Hofmeister series in order to ascertain the difference in detection limit imparted by the specific functionalization of the bambus[6]uril macrocycles, which are quite sensitive to modest steric effects. Significant improvements to perchlorate and nitrate detection limits were observed via n-butyl bambusuril-containing sensor membranes over detection limits recorded with benzyl bambusuril sensors.

Fabrication of Poly(ε-caprolactone)-embedded Lignin-Chitosan Nanocomposite Porous Scaffolds from Pickering Emulsions.

Poly(ε-caprolactone) (PCL)-incorporated lignin-chitosan biomass-based nanocomposite porous scaffolds have been effectively prepared by templating oil-in-water Pickering high internal phase emulsions (HIPEs). PCL is dissolved in oil and chitosan and lignin nanoparticles originate in water. The continuous phase of the emulsions is gelled by cross-linking of chitosan with genipin and then freeze-dried to obtain porous scaffolds. The resulting scaffolds display interconnected and tunable pore structures. An increase in PCL content increases the mechanical strength and greatly reduces the water absorption capacity of the scaffolds. Scaffolds loaded with the anti-bacterial drug enrofloxacin show a slow drug release profile, adjustable release rate, and favorable long-term anti-bacterial activity. Moreover, Pickering emulsion templates with suitable viscosity are used as 3D printing inks to construct porous scaffolds with personalized geometry. The results imply that the simplicity and versatility of the technique of combining freeze-drying with Pickering HIPE templates is a promising approach to fabricate hydrophobic biopolymer-incorporated biomass-based nanocomposite porous scaffolds for biomedical applications.

Pathway-Controlled Aqueous Supramolecular Polymerization via Solvent-Dependent Chain Conformation Effects

Solute-solvent interactions play a critical role in multiple fields, including biology, materials science, and (physical) organic, polymer, and supramolecular chemistry. Within the growing field of supramolecular polymer science, these interactions have been recognized as an important driving force for (entropically driven) intermolecular association, particularly in aqueous media. However, to date, solute-solvent effects remain poorly understood in the context of complex self-assembly energy landscapes and pathway complexity. Herein, we unravel the role of solute-solvent interactions in controlling chain conformation effects, allowing energy landscape modulation and pathway selection in aqueous supramolecular polymerization. To this end, we have designed a series of oligo(phenylene ethynylene) (OPE)-based bolaamphiphilic Pt(II) complexes OPE2-4 bearing solubilizing triethylene glycol (TEG) chains of equal length on both molecule ends, but a different size of the hydrophobic aromatic scaffold. Strikingly, detailed self-assembly studies in aqueous media disclose a different tendency of the TEG chains to fold back and enwrap the hydrophobic molecular component depending on both the size of the core and the volume fraction of the co-solvent (THF). The relatively small hydrophobic component of OPE2 can be readily shielded by the TEG chains, leading to only one aggregation pathway. In contrast, the decreased capability of the TEG chains to effectively shield larger hydrophobic cores (OPE3 and OPE4) enables different types of solvent quality-dependent conformations (extended, partly back-folded and back-folded), which in turn induce various controllable aggregation pathways with distinct morphologies and mechanisms. Our results shed light on previously underappreciated solvent-dependent chain conformation effects and their role in governing pathway complexity in aqueous media.

Exploration of LPS2 agonist binding modes using the combination of a new hydrophobic scaffold and homology modeling

Lysophosphatidylserine (LysoPS) is an endogenous pan-agonist of three G-protein coupled receptors (GPCRs): LPS1/GPR34, LPS2/P2Y10, and LPS3/GPR174, and we previously reported a series of LysoPS-based agonists of these receptors. Interestingly, we found that LPS1 agonist activity was very sensitive to structural change at the hydrophobic fatty acid moiety, whereas LPS2 agonist activity was not. Here, to probe the molecular basis of LPS2 agonist binding, we developed a new class of hydrophobic fatty acid surrogates having a biphenyl-ether scaffold. The LPS2 agonist activity of these compounds proved sensitive to molecular modification of the hydrophobic skeleton. Thus, we next constructed an LPS2 model by homology modeling and docking/molecular dynamics (MD) simulation, and validated it by means of SAR studies together with point mutations of selected receptor amino-acid residues. The putative ligand-binding site of LPS2 is Γ-shaped, with a hydrophilic site horizontally embedded in the receptor transmembrane helix bundles and a perpendicular hydrophobic groove adjoining transmembrane domains 4 and 5 that is open to the membrane bilayer. The binding poses of LPS2 agonists to this site are consistent with easy incorporation of various kinds of fatty acid surrogates. Structural development based on this model afforded a series of potent and selective LPS2 full agonists, which showed enhanced in vitro actin stress fiber formation effect.

In vitro and in vivo degradation correlations for polyurethane foams with tunable degradation rates.

Polyurethane foams present a tunable biomaterial platform with potential for use in a range of regenerative medicine applications. Achieving a balance between scaffold degradation rates and tissue ingrowth is vital for successful wound healing, and significant in vivo testing is required to understand these processes. Vigorous in vitro testing can minimize the number of animals that are required to gather reliable data; however, it is difficult to accurately select in vitro degradation conditions that can effectively mimic in vivo results. To that end, we performed a comprehensive in vitro assessment of the degradation of porous shape memory polyurethane foams with tunable degradation rates using varying concentrations of hydrogen peroxide to identify the medium that closely mimics measured in vivo degradation rates. Material degradation was studied over 12 weeks in vitro in 1%, 2%, or 3% hydrogen peroxide and in vivo in subcutaneous pockets in Sprague Dawley rats. We found that the in vitro degradation conditions that best predicted in vivo degradation rates varied based on the number of mechanisms by which the polymer degraded and the polymer hydrophilicity. Namely, more hydrophilic materials that degrade by both hydrolysis and oxidation require lower concentrations of hydrogen peroxide (1%) to mimic in vivo rates, while more hydrophobic scaffolds that degrade by oxidation alone require higher concentrations of hydrogen peroxide (3%) to model in vivo degradation. This information can be used to rationally select in vitro degradation conditions that accurately identify in vivo degradation rates prior to characterization in an animal model.

Hydrophobic nanoporous carbon scaffolds reveal the origin of polarity-dependent electrocapillary imbibition.

An engineered nanoporous carbon scaffold (NCS) consisting of a 3-D interconnected 85 nm nanopore network was used here as a model material to investigate the nanoscale transport of liquids as a function of the polarity and magnitude of an applied potential ('electro-imbibition'), all in 1 M KCl solution. A camera was used to track both meniscus formation and meniscus jump, front motion dynamics, and droplet expulsion, while also quantifying the electrocapillary imbibition height (H) as a function of the applied potential of the NCS material. Although no imbibition was seen over a wide range of potentials, at positive potentials (+1.2 V vs. the potential of zero charge (pzc)), imbibition was correlated with carbon surface electro-oxidation, as confirmed by both electrochemistry and post-imbibition surface analysis, with gas evolution (O2, CO2) seen visually only after imbibition was well underway. At negative potentials, vigorous hydrogen evolution reaction was observed at the NCS/KCl solution interface, well before imbibition began at -0.5 Vpzc, proposed to be nucleated by an electrical double layer charging-driven meniscus jump, followed by processes such as Marangoni flow, adsorption induced deformation, and hydrogen pressure driven flow. This study improves the understanding of electrocapillary imbibition at the nanoscale, being highly relevant in a wide range of multidisciplinary practical applications, including in energy storage and conversion devices, energy-efficient desalination, and electrical-integrated nanofluidics design.

Immobilization of Gelatin on Fibers for Tissue Engineering Applications: A Comparative Study of Three Aliphatic Polyesters.

Immobilization of cell adhesive proteins on the scaffold surface has become a widely reported method that can improve the interaction between scaffold and cells. In this study, three nanofibrous scaffolds obtained by electrospinning of poly(caprolactone) (PCL), poly(L-lactide-co-caprolactone) (PLCL) 70:30, or poly(L-lactide) (PLLA) were subjected to chemical immobilization of gelatin based on aminolysis and glutaraldehyde cross-linking, as well as physisorption of gelatin. Two sets of aminolysis conditions were applied to evaluate the impact of amine group content. Based on the results of the colorimetric bicinchoninic acid (BCA) assay, it was shown that the concentration of gelatin on the surface is higher for the chemical modification and increases with the concentration of free NH2 groups. XPS (X-ray photoelectron spectroscopy) analysis confirmed this outcome. On the basis of XPS results, the thickness of the gelatin layer was estimated to be less than 10 nm. Initially, hydrophobic scaffolds are completely wettable after coating with gelatin, and the time of waterdrop absorption was correlated with the surface concentration of gelatin. In the case of all physically and mildly chemically modified samples, the decrease in stress and strain at break was relatively low, contrary to strongly aminolyzed PLCL and PLLA samples. Incubation testing performed on the PCL samples showed that a chemically immobilized gelatin layer is more stable than a physisorbed one; however, even after 90 days, more than 60% of the initial gelatin concentration was still present on the surface of physically modified samples. Mouse fibroblast L929 cell culture on modified samples indicates a positive effect of both physical and chemical modification on cell morphology. In the case of PCL and PLCL, the best morphology, characterized by stretched filopodia, was observed after stronger chemical modification, while for PLLA, there was no significant difference between modified samples. Results of metabolic activity indicate the better effect of chemical immobilization than of physisorption of gelatin.

Raman Metabolomics of Candida auris Clades: Profiling and Barcode Identification.

This study targets on-site/real-time taxonomic identification and metabolic profiling of seven different Candida auris clades/subclades by means of Raman spectroscopy and imaging. Representative Raman spectra from different Candida auris samples were systematically deconvoluted by means of a customized machine-learning algorithm linked to a Raman database in order to decode structural differences at the molecular scale. Raman analyses of metabolites revealed clear differences in cell walls and membrane structure among clades/subclades. Such differences are key in maintaining the integrity and physical strength of the cell walls in the dynamic response to external stress and drugs. It was found that Candida cells use the glucan structure of the extracellular matrix, the degree of α-chitin crystallinity, and the concentration of hydrogen bonds between its antiparallel chains to tailor cell walls’ flexibility. Besides being an effective ploy in survivorship by providing stiff shields in the α–1,3–glucan polymorph, the α–1,3–glycosidic linkages are also water-insoluble, thus forming a rigid and hydrophobic scaffold surrounded by a matrix of pliable and hydrated β–glucans. Raman analysis revealed a variety of strategies by different clades to balance stiffness, hydrophobicity, and impermeability in their cell walls. The selected strategies lead to differences in resistance toward specific environmental stresses of cationic/osmotic, oxidative, and nitrosative origins. A statistical validation based on principal component analysis was found only partially capable of distinguishing among Raman spectra of clades and subclades. Raman barcoding based on an algorithm converting spectrally deconvoluted Raman sub-bands into barcodes allowed for circumventing any speciation deficiency. Empowered by barcoding bioinformatics, Raman analyses, which are fast and require no sample preparation, allow on-site speciation and real-time selection of appropriate treatments.

Precise heteroatom doping determines aqueous solubility and self-assembly behaviors for polycyclic aromatic skeletons

Developing effective strategies to improve the hydrophilicity or aqueous solubility of hydrophobic molecular scaffolds is meaningful for both academic research and industrial applications. Herein, we demonstrate that stepwise and precise N/O heteroatoms doping on a polycyclic aromatic skeleton can gradually alter these structures from hydrophobic to hydrophilic, even resulting in excellent aqueous solubility. The Hansen solubility parameters (HSP) method shows that the three partial solubility parameters are closely related to N/O doping species, numbers and positions on the molecular panel. The hydrogen bonding solubility parameter indicates that the hydrogen bonding interactions between N/O doped molecules and water play a key role in enhancing hydrophilicity. Moreover, three optimized water-soluble molecules underwent a self-assembly process to form stable nanoparticles in water, thus facilitating better hydrogen bonding interactions disclosed by HSP calculations, NMR and single crystal X-ray analysis. These ensembles even show quasi-solid properties in water from NMR and luminescence perspectives.

Discovery and Structure-Based Design of Macrocyclic Peptides Targeting STUB1.

Recent evidence suggests that deletion of STUB1─a pivotal negative regulator of interferon-γ sensing─may potentially clear malignant cells. However, current studies rely primarily on genetic approaches, as pharmacological inhibitors of STUB1 are lacking. Identifying a tool compound will be a step toward validating the target in a broader therapeutic sense. Herein, screening more than a billion macrocyclic peptides resulted in STUB1 binders, which were further optimized by a structure-enabled in silico design. The strategy to replace the macrocyclic peptides' hydrophilic and solvent-exposed region with a hydrophobic scaffold improved cellular permeability while maintaining the binding conformation. Further substitution of the permeability-limiting terminal aspartic acid with a tetrazole bioisostere retained the binding to a certain extent while improving permeability, suggesting a path forward. Although not optimal for cellular study, the current lead provides a valuable template for further development into selective tool compounds for STUB1 to enable target validation.

Recent progress of mechanism of mineralization process induced by Ta2O5/PCL scaffolds

AbstractMineralization of hydroxyapatite mineralized by acidic metal oxides has attracted substantial research interest in the research and development of orthopedic substitutes. In this study, Polycaprolactone (PCL) nanofibers with nano‐tantalum oxide (Ta2O5) were successfully fabricated through electrospinning. The scaffold simulates the mineralization process of hydroxyapatite in simulated body fluid. However, in the process of mineralization, there is a chemical reaction between hydrophobic scaffolds and acid oxides, which is believed to have a significant impact on the biological effects of the scaffolds. The results of SEM, EDS, XRD, Mapping, FTIR, GPC, 13CNMR, and 1HNMR explain the principle of hydroxyapatite mineralization by Ta2O5 and the reason why the composite scaffold is blurred, that is, the carbonyl carbon of PCL attacked by the surface hydroxyl groups of Ta2O5 to catalyze its ring‐opening polymerization to synthesize PCL/Ta2O5 nanocomposites in one step. In order to accurately explore the effect of this reaction on the metabolism of biological macromolecules in the future, we provide a detailed route of Ag Nanoparticles ‐Dimercaptosuccinic acid@Transcription activator (AgNPs‐DMSA@TAT) probe synthesis. The results provide a reference for the sedimentation of hydroxyapatite induced by acid oxides and its effect on traditional electrospun fiber scaffolds.

Efficient Recycling of Catalyst‐Solvent Couples from Lewis Acid‐Catalyzed Asymmetric Reactions in Water

AbstractBioinspired supramolecular architectures were used to compartmentalize highly charged aqua scandium ions into chiral hydrophobic scaffolds for Lewis acid‐catalyzed asymmetric reactions. Recycling without significant loss in catalytic performance is a formidable task, especially for Lewis acid‐catalyzed reactions. This is because Lewis basic impurities derived from starting materials, products, and water are highly competitive ligands for both substrate binding and metal complexation, thus poisoning the Lewis acids and leading to their leaching. Even when basic aniline is used, the architecture allowed for effective suppression of Sc3+ leaching and for reuse of solvent‐catalyst couples in asymmetric ring‐opening reactions without deactivation. Application to asymmetric thia‐Michael addition and hydroxymethylation was also demonstrated. The successful recycling in highly Lewis basic environments underpins the exceptionally high robustness of the chiral Lewis acid catalyst.

Efficient Recycling of Catalyst-Solvent Couples from Lewis Acid-Catalyzed Asymmetric Reactions in Water.

Bioinspired supramolecular architectures were used to compartmentalize highly charged aqua scandium ions into chiral hydrophobic scaffolds for Lewis acid-catalyzed asymmetric reactions. Recycling without significant loss in catalytic performance is a formidable task, especially for Lewis acid-catalyzed reactions. This is because Lewis basic impurities derived from starting materials, products, and water are highly competitive ligands for both substrate binding and metal complexation, thus poisoning the Lewis acids and leading to their leaching. Even when basic aniline is used, the architecture allowed for effective suppression of Sc3+ leaching and for reuse of solvent-catalyst couples in asymmetric ring-opening reactions without deactivation. Application to asymmetric thia-Michael addition and hydroxymethylation was also demonstrated. The successful recycling in highly Lewis basic environments underpins the exceptionally high robustness of the chiral Lewis acid catalyst.

Varifocal liquid microlens in scaffold microstructures under electrothermal actuation

Liquid microlens (LML) has attracted wide attention due to their miniaturization, uniformities and easy integration in adaptive optical systems. However, optical aberration and simple varifocal imaging are still critical challenges for the broader application of LML. Inspired by the easy deformation of droplets trapped by micropillars, LML in scaffold microstructures are proposed. In this paper, we present a simple, low-cost and effective approach to fabricate LML in scaffold microstructures. Our LML consists of glycerol droplets trapped in hydrophobic NOA71 scaffold microstructures, which are imprinted onto an ITO glass substrate to enable electrothermal control of the LML imaging characteristics. The electrothermal control allows changing the shape of the LML spherical surface, thus making it possible to tune their focus, decrease their imaging aberration, and improve their imaging definition. The electrothermal actuator is obtained by applying a DC power with a voltage of 8.4 V and a current of 0.39 A onto the ITO glass. It is found that the imaging aberration of LML reduced by 6 times of initial state and the imaging definition of LML increased by 2.8 times of initial state on the DC power for 2 min. Thus, the LML in scaffold microstructures demonstrates the potential of the adjustable imaging performance in the development of integrated dynamical tunable optical devices.

Reactive oxygen species-degradable polythioketal urethane foam dressings to promote porcine skin wound repair.

Porous, resorbable biomaterials can serve as temporary scaffolds that support cell infiltration, tissue formation, and remodeling of nonhealing skin wounds. Synthetic biomaterials are less expensive to manufacture than biologic dressings and can achieve a broader range of physiochemical properties, but opportunities remain to tailor these materials for ideal host immune and regenerative responses. Polyesters are a well-established class of synthetic biomaterials; however, acidic degradation products released by their hydrolysis can cause poorly controlled autocatalytic degradation. Here, we systemically explored reactive oxygen species (ROS)-degradable polythioketal (PTK) urethane (UR) foams with varied hydrophilicity for skin wound healing. The most hydrophilic PTK-UR variant, with seven ethylene glycol (EG7) repeats flanking each side of a thioketal bond, exhibited the highest ROS reactivity and promoted optimal tissue infiltration, extracellular matrix (ECM) deposition, and reepithelialization in porcine skin wounds. EG7 induced lower foreign body response, greater recruitment of regenerative immune cell populations, and resolution of type 1 inflammation compared to more hydrophobic PTK-UR scaffolds. Porcine wounds treated with EG7 PTK-UR foams had greater ECM production, vascularization, and resolution of proinflammatory immune cells compared to polyester UR foam-based NovoSorb Biodegradable Temporizing Matrix (BTM)-treated wounds and greater early vascular perfusion and similar wound resurfacing relative to clinical gold standard Integra Bilayer Wound Matrix (BWM). In a porcine ischemic flap excisional wound model, EG7 PTK-UR treatment led to higher wound healing scores driven by lower inflammation and higher reepithelialization compared to NovoSorb BTM. PTK-UR foams warrant further investigation as synthetic biomaterials for wound healing applications.