Hydrophobic Groups Research Articles

Experimental investigation into coal wettability changes caused by reactions with scCO2-H2O

Geological CO2 sequestration (GCS) can help mitigate global warming and enhance methane recovery from coal beds. However, few studies have linked the effects of CO2 to surface chemistry changes controlling wetting behavior in deep coal beds. Contact angles (CAs) of CO2/N2-high volatile bituminous coal-water systems were measured under different temperatures and pressures. The surface chemistry and physical structure of coals were characterized to investigate changes in physicochemical properties and their relations with wettability after reactions. For N2 treatment, the time-dependence of static and dynamic CAs were insignificant, ranging within 4°. For gaseous CO2 treatment, the static CAs and the average advancing angles increased slightly. With supercritical (sc) CO2, both the static and dynamic CAs increased significantly, and θadv changed to intermediate-wet (92°). Reactions with minerals exposed to scCO2 resulted in greater surface roughness and heterogeneity, greater contact angle hysteresis and more surface sites occupied by scCO2 rather than H2O. Increases in hydrophobic functional groups and decreases in hydrophilicity were shown by FTIR spectra, reflecting the shedding of polar oxygen-containing functional groups, reduction of hydrogen bonds, and increasing percentage of hydrocarbons. XRD patterns obtained following scCO2-treatment showed that crystallite growth and molecular polymerization were higher toward graphite-like. The calculated structural parameters of functional groups and crystallites both showed elevated coal rank. Changes in crystallite structure, notably higher carbon content and decreased negative surface charge, are unfavorable for water-wetting. This study contributes to understanding surface chemistry changes responsible for decreased wettability during CO2-enhanced coal bed methane recovery and GCS in coal reservoirs.

Universal Access to Water-Compatible and Nanostructured Materials via the Self-Assembly of Cationic Alternating Copolymers.

Herein, we report the water-assisted self-assembly of alternating copolymers bearing imidazolium cations and hydrophobic groups to create water-compatible and nanostructured materials. The copolymers efficiently absorbed water into the cationic segments from the outer environments, depending on the relative humidity. The absorbed water serves as hydrophilic molecules to modulate the weight fraction of hydrophilic/hydrophobic units in the samples. Thus, the morphologies and domain spacing of the nanostructures can be controlled by not only the side chains, but also the amount of absorbed water. The self-assembly of the cationic copolymers, developed herein, afforded universal access to various morphologies, including lamella, gyroid, and cylinder, in addition to the precision control of the domain spacing at the 0.01 nm level.

Colloidal interactions between nanochitin and surfactants: Connecting micro- and macroscopic properties by isothermal titration calorimetry and rheology

This study elucidates the intricate interactions between chitin nanocrystals (ChNC) and surfactants of same hydrophobic tail (C12) but different head groups types (anionic, cationic, nonionic): sodium dodecyl sulfate (SDS), dodecyltrimethylammonium bromide (DTAB), and polyoxyethylene(23)lauryl ether (Brij-35). Isothermal Titration Calorimetry (ITC) and rheology are used to study the complex ChNC-surfactant interactions in aqueous media, affected by adsorption, self-assembly and micellization. The ITC results demonstrate that the surfactant head group significantly influences the dynamics and nature of the involved phenomena. Cationic DTAB's reveal minimal interaction with ChNC, non-ionic Brij-25's interact moderately at low concentrations driven by hydrophobic effects while SDS's interacts strongly and show complex interaction patterns that fall across four distinct regimes with SDS addition. We attribute such behavior to initiate through electrostatic attraction and terminate in surfactant micelle formation on ChNC surfaces. ITC also elucidates the impact of ChNC concentration on key parameters including critical aggregation concentration (CAC) and saturation concentration (C2). Dynamic rheological analysis indicates the molecular interactions translate to non-linear variations in the elastic modulus (G') upon SDS addition mirroring that observed in ITC experiments. Such a direct correlation between molecular interactions and macroscopic rheological properties provides insights to aid in the creation of nanocomposites with tailored properties.

Adsorption behavior and application properties of natural alcohol polyoxyethylene polyoxypropylene ether sulfate

In recent years, the Polyoxypropylene (PO) group has been introduced between the hydrophobic group and the polyoxyethylene (EO) group of traditional surfactants to enhance interfacial properties. However, literature on surfactants introducing PO chains between EO and hydrophilic groups remains scarce. In this study, three variants of natural alcohol polyoxyethylene polyoxypropylene ether sulfate (C1214E3PnS), each with different PO addition numbers, were synthesized from natural alcohol ether through sulfation and neutralization reactions. The adsorption behavior of C1214E3PnS with different PO addition numbers was investigated and compared to AES by measuring surface tension, dynamic surface tension, and contact angle. The results indicate that as the number of PO increases, both the critical micelle concentration and maximum adsorption capacity decrease. Additionally, pC20 and the number of PO groups introduced in the surfactant show a linear negative correlation, indicating a decline in surfactant efficiency. Due to an adsorption barrier, C1214E3PnS is governed by a mixed diffusion-kinetics adsorption mechanism. According to the application performance of C1214E3PnS, as the number of PO increases, wettability and foam stability have decline, while emulsifying performance is significantly enhanced. In conclusion, surfactants such as C1214E3PnS do not favor adsorption at the solid–liquid interface, but enhance the properties at the oil–water interface.

Inside of the burst-phase intermediate of a protein folding. Hydration of hydrophobic groups

The thermal effect of the formation of the “burst-phase” folding intermediate has been studied using a titration calorimeter. It is shown that, unlike the total thermal effect of native structure formation, it can be both positive and negative depending on the temperature. The reasons for this paradoxical behavior are analyzed. A conclusion is drawn about the leading role of dehydration of non-polar groups in the first stage of folding.

One-Pot Synthesis of Diverse Anion-Binding Macrocycles

AbstractA one-pot synthetic protocol to access a diverse library of diamide–diester macrocycles from the same starting materials is reported. The molecular symmetry can be readily tuned based on the reaction sequence, while the core structure can be varied using amino acids and aromatic building blocks. The first class of macrocycles with C2 axes in their molecular plane were obtained in 24 h with 40–70% yield, while another class with C2 axes perpendicular to the plane were synthesized in 18 h in 10–30% yield. The phenyl- and serine-derived macrocycles of the first class could bind acetate, chloride, and phosphate ions. These macrocycles can be functionalized with hydrophobic groups and potentially be used as ion transporters.

Dynamic changes of tenderness, moisture and protein in marinated chicken: the effect of different steaming temperatures.

The steam processing characteristics of chicken are a key factor in the simplicity and versatility of steamed chicken dishes. The aim of this study was to investigate in depth the changes in tenderness and water retention of marinated chicken at different slow steaming endpoint temperatures, and to further explore the effect of the evolution of protein conformations on the water status. The results showed that chicken samples' shear force peaked at 80 °C and decreased rapidly at 90 °C. As the steaming endpoint temperature increased between 50 and 90 °C, T21, T22, moisture content and centrifugal loss decreased, but P21, P22 and myofibril water-holding capacity showed regular changes. The electrophoretic bands and protein conformation changes showed that protein in marinated chicken underwent different degrees of denaturation, degradation and aggregation. And at 70 °C, with an increase of hydrophobic groups and crosslinking of disulfide bonds as well as an increase in the number of denatured sarcoplasmic proteins, the intermolecular network was enhanced, thus affecting the water retention. Water status of chicken meat heated at different steaming temperatures is closely related to the evolution of protein conformations. The present study serves as a robust theoretical foundation for enhancing the quality of steamed chicken products at an industrial scale. © 2024 Society of Chemical Industry.

Zincophilic and hydrophobic groups of surfactant-type electrolyte additive enabled stable anode/electrolyte interface toward long-lifespan aqueous zinc ion batteries

Rechargeable aqueous zinc-ion batteries, while promising in terms of safety, cost-effectiveness, and eco-friendliness, face challenges such as zinc dendrite growth and parasitic reactions at the anode/electrolyte interface. Herein, a low-cost cationic surfactant, dodecyltrimethyl ammonium chloride (DTAC) is deployed as a competitive additive in traditional ZnSO4 electrolyte to stabilize the zinc anode. Firstly, the DTAC additive disrupts the hydrogen bonding network and regulates the solvation structure. Secondly, the DTA+ cations preferentially adsorb onto the anode surface vertically, forming a dodecyl chain hydrophobic layer that suppresses the side reactions. Thirdly, the hydrophobic layer not only elevates the nucleation overpotential of Zn2+ ions but also limits their 2D diffusion at the anode surface, triggering oriented deposition of metal zinc and inhibiting dendrite growth. Leveraging these triple-regulation effects, the Zn//Zn symmetric cell with DTAC additives achieves an ultra-long cycle life of 2000 h at a current density of 1 mA cm−2 with 1 mAh cm−2. Furthermore, the Zn//MnO2 full cell with DTAC additive demonstrates promising performance, delivering an initial capacity of 149.44 mAh g−1 at 5 A g−1 and retaining 83.02 % of its capacity after 2000 cycles. These results underscore the potential of DTAC additives in advancing the industrialization of AZIBs.

Nonlinear Impact of Electrolyte Solutions on Protein Dynamics.

Halophilic organisms have adapted to multi-molar salt concentrations, their cytoplasmic proteins functioning despite stronger attraction between hydrophobic groups. These proteins, of interest in biotechnology because of decreasing fresh-water resources, have excess acidic amino acids. It has been suggested that conformational fluctuations - critical for protein function - decrease in the presence of a stronger hydrophobic effect, and that an acidic proteome would counteract this decrease. However, our understanding of the salt- and acidic amino acid dependency of enzymatic activity is limited. Here, using solution NMR relaxation and molecular dynamics simulations for in total 14 proteins, we show that salt concentration has a limited and moreover non-monotonic impact on protein dynamics. The results speak against the conformational-fluctuations model, instead indicating that maintaining protein dynamics to ensure protein function is not an evolutionary driving force behind the acidic proteome of halophilic proteins.

Formation of Microporous Poly Acrylonitrile-Co-Methyl Acrylate Membrane via Thermally Induced Phase Separation for Immiscible Oil/Water Separation.

An interconnected sponge structure and porous surface poly (acrylonitrile-co-methyl acrylate) (P(AN-MA)) microfiltration membranes (MF) were fabricated via thermally induced phase separation (TIPS) by using caprolactam (CPL), and acetamide (AC) as the mixed diluent. When the ternary system was composed of 15 wt.% P(AN-MA), 90 wt.% CPL, and 10 wt.% AC and formed in a 25 °C air bath, the membrane exhibited the highest water flux of 8107 L/m2·h. The P(AN-MA) membrane contained hydrophobic groups (-COOCH3) and hydrophilic groups (-CN), leading it to exhibit oleophobic properties underwater and hydrophobic properties in oil. The membrane demonstrates efficient separation of immiscible oil/water mixtures. The pure water flux of the petroleum ether/water mixture measured 870 L/m2·h, and the pure oil flux of the petroleum tetrachloride/water mixture measured 1230 L/m2·h under the influence of gravity. Additionally, the recovery efficiency of diluents through recrystallization was 85.3%, significantly reducing potential pollution and production costs.

Unravelling Competitive Interactions between Polymer Side Chains and End Groups with β-Cyclodextrin.

This study investigates unexpected competitive host-guest interactions of β-cyclodextrin (β-CD), which can occur with polymers in aqueous solution, using the examples of the two polymers poly(oligo(ethylene glycol) methyl ether methacrylate) and poly(glycerol mono methacrylate). Systematic structural modifications of the polymer provide insight into the host-guest interaction with β-CD and the competition between side chains and end groups such as hydrophobic end groups remaining from reversible addition fragmentation chain transfer polymerization or intentionally implemented molecular recognition units such as arylazopyrazole photoswitches.

Determination of Acetylamantadine by γ-Cyclodextrin-Assisted α-HL Nanopore for Potential Cancer Prediagnosis.

The high expression of Spermidine/spermine N1-acetyltransferase (SSAT-1) is an important indicator in early cancer diagnosis. Here, we developed a nanopore-based methodology with γ-cyclodextrin as an adaptor to detect and quantify acetylamantadine, the specific SSAT-1-catalyzed product from amantadine, to accordingly reflect the activity of SSAT-1. We employ γ-cyclodextrin and report that amantadine cannot cause any secondary signals in γ-cyclodextrin-assisted α-HL nanopore, while its acetylation product, acetylamantadine, does. This allows γ-cyclodextrin to practically detect acetylamantadine in the interference of excessive amantadine, superior to the previously reported β-cyclodextrin. The quantification of acetylamantadine was not interfered with even a 50-fold amantadine and displayed no interference in artificial urine sample analysis, which indicates the good feasibility of this nanopore-based methodology in painless cancer prediagnosis. In addition, the discrimination mechanism is also explored by 2-D nuclear magnetic resonance (NMR) and nanopore experiments with a series of adamantane derivatives with different hydrophilic and hydrophobic groups. We found that both the hydrophobic region matching effect and hydrophilic interactions play a synergistic effect in forming a host-guest complex to further generate the characteristic signals, which may provide insights for the subsequent design and study of drug-cyclodextrin complexes.

ROS-responsive carboxymethyl chitosan nanoparticles loaded with astaxanthin for alleviating oxidative damage in intestinal cells

The controlled release of antioxidant substances at the intestinal oxidative damage site is crucial for alleviating intestine-related diseases. Herein, the novel ROS-responsive carrier was synthesized through simple amidation reaction between carboxymethyl chitosan (CMC) and methionine (Met), a natural organic compound containing ROS-responsive linkages (thioether). Initially, astaxanthin (AXT) nanoparticles (AXT2@CMT) with excellent stability and drug loading capacity (39.68 ± 0.23 μg/mL) were prepared by optimizing various reaction conditions. In the simulated high-concentration ROS environment of the intestine, CMT achieved a transition from hydrophobic groups (thioether) into hydrophilic groups (sulfone), which was conducive to the controlled release of AXT. In vitro cell experiments revealed that AXT2@CMT could effectively alleviate the oxidative damage in intestinal epithelioid cell line No. 6 (IEC-6 cell) caused by H2O2. This study achieved a straightforward preparation of ROS-responsive nanocarrier through food ingredients, offering a theoretical foundation for the controlled release of AXT at the intestinal oxidative damage site.

3D-QSAR and molecular docking studies of peptide-hybrids as dengue virus NS2B/NS3 protease inhibitors

Global warming and climate change have made dengue disease a global health issue. More than 50 % of the world's population is at danger of dengue virus (DENV) infection, according to the World Health Organization (WHO). Therefore, a clinically approved dengue fever vaccination and effective treatment are needed. Peptide medication development is new pharmaceutical research. Here we intend to recognize the structural features inhibiting the DENV NS2B/NS3 serine protease for a series of peptide-hybrid inhibitors (R1–R2-Lys-R3-NH2) by the 3D-QSAR technique. Comparative molecular field analysis (q2 = 0.613, r2 = 0.938, r2pred = 0.820) and comparative molecular similarity indices analysis (q2 = 0.640, r2 = 0.928, r2pred = 0.693) were established, revealing minor, electropositive, H-bond acceptor groups at the R1 position, minor, electropositive, H-bond donor groups at the R2 position, and bulky, hydrophobic groups at the R3 position for higher inhibitory activity. Docking studies revealed extensive H-bond and hydrophobic interactions in the binding of tripeptide analogues to the NS2B/NS3 protease. This study provides an insight into the key structural features for the design of peptide-based inhibitors of DENV NS2B/NS3 protease.

Effect of cold plasma treatment of sunflower seed protein modification on its structural and functional properties and its mechanism

Sunflower seed protein is a protein rich in amino acids, but its structure is more difficult to be applied due to its poor functional properties. The purpose of this study is to investigate the effect of cold plasma treatment on the structural and functional properties of sunflower seed protein. The results showed that the energetic particles and active substances generated by cold plasma treatment could improve the spatial structure of the protein by bombardment/etching and oxidation, respectively, which led to the change of its secondary structure: α-helices and random coil were transformed to β-sheet and β-turns, and the tertiary structure: the fluorescence intensity was increased, the roughness was decreased, which finally led to the increase of the zeta-potential, the solubility increased to 7.341, and the emulsion increased to 7.341, which led to the increase of the solubility and the fluorescence intensity. to 7.341, and the emulsion activity index and emulsion stability index increased from 1.842 m2/g, 107.5 min to 3.3887 m2/g, 171.4 min. These changes were attributed to the fact that the cold plasma treatment altered the structure of sunflower proteins from tightly hydrophobic to loosely hydrophilic, with the exposure of the internal hydrophobic groups and the protein aggregation from large to small. This provides a theoretical basis for its application in food.

Cytochrome c electrochemical detection utilizing molecularly imprinted poly(3, 4-ethylenedioxythiophene) on a disposable screen printed carbon electrode

Cytochrome c (cyt c) has been found to play a function in apoptosis in cell-free models. This work presents the creation of molecularly imprinted conducting poly(3, 4-ethylenedioxythiopene) (MIPEDOT) on the surface of a screen printed carbon electrode (SPCE) for cyt c. Cyt c was imprinted by electropolymerization due to the presence of an EDOT monomer hydrophobic functional group on SPCE, using CV to obtain highly selective materials with excellent molecular recognition ability. MIPEDOT was characterized by CV, EIS, and DPV using ferricyanide/ferrocyanide as a redox probe. Further, the characterization of the sensor was accomplished using SEM for surface morphological confirmation. Using CV, the peak current measured at the potential of +1 to −1 V (vs. Ag/AgCl) is linear in the cyt c concentration range from 1 to 1200 pM, showing a remarkably low detection limit of 0.5 pM (sensitivity:0.080 μA pM). Moreover, the applicability of the approach was successfully confirmed with the detection of cyt c in biological samples (human plasma). Similarly, our research has proven a low-cost, simple, and efficient sensing platform for cyt c detection, rendering it a viable tool for the future improvement of reliable and exact non-encroaching cell death detection.

Spatially selective catalysis of OSA starch for preparation of Pickering emulsions with high emulsification properties

The traditional strategies of chemical catalysis and biocatalysis for producing octenyl succinic anhydride modified starch can only randomly graft hydrophobic groups on the surface of starch, resulting in unsatisfactory emulsification performance. In this work, a lipase-inorganic hybrid catalytic system with multi-scale flower like structure is designed and applied to spatially selective catalytic preparation of ocenyl succinic anhydride modified starch. With the appropriate floral morphology and petal density, lipases distributed in the “flower center” can selectively catalyze the grafting of hydrophobic groups in a spatial manner, the hydrophobic groups are concentrated on one side of starch particles. The obtaining OSA starch exhibits excellent emulsifying property, and the pickering emulsion has good protective effect on the embedded curcumin. This work provides a direction for the development of high-performance starch-based emulsifiers for the food and pharmaceutical industries, which is of great significance for improving the preparation and emulsification theory research of modified starch.

Impact of surfactant groups on the corrosion inhibition properties of superhydrophobic membranes on X80 steel

Fe2O3/Fe3O4 composite films were successfully prepared on the surface of X80 steel through hydrothermal synthesis and annealing treatments. Subsequently, the oxidised films were modified using surfactants such as decanoic acid (DA), decyl silane triol (DS) and perfluorodecyl silane triol (FDS), resulting in the creation of three distinct films exhibiting superhydrophobic properties. The effects of the hydrophilic and hydrophobic groups of surfactants on the superhydrophobic films of X80 steel were analysed using electrochemical methods, surface analysis techniques and theoretical calculations. The results showed that all three superhydrophobic films exhibited excellent corrosion resistance, with the order being DA > FDS > DS after 72 h of immersion in acidic conditions (pH = 6, 60 °C). Theoretical calculations showed that the adsorption performance of carboxyl groups was superior to that of silyl alcohol bonds, whereas fluorination of hydrophobic groups helped to enhance the adsorption capacity of hydrophilic groups. This not only reveals the key role of surfactants in the preparation of superhydrophobic membranes but also provides a theoretical basis for the preparation of superhydrophobic membranes on carbon steel surfaces.

Effect of extraction methods on functional properties of plant proteins: A review

AbstractFood proteins should not only provide nutrition but should also have specific functional properties that facilitate processing and enhance product performance. These functional properties refer to the physicochemical characteristics that govern the behavior of proteins in food. In this context, this article delves into the impact of extraction techniques on functional properties of protein, like solubility, emulsifying, foaming, and oil and water holding capacity. Novel extraction methods can boost extraction yield and enhance technological, functional, and nutritional properties of protein. Protein solubility was found to be significantly impacted by the application of novel extraction methods. Studies also concluded that enhancing the solubility of commercial protein isolates may lead to better functional properties. However, excessive use of extraction techniques can result in protein aggregation, which can negatively impact the foaming properties. Exposing hydrophobic groups and enhancing flexibility are the effects of novel treatment on different proteins resulting in an improvement in their functional properties. Similarly alkaline and micellized extraction also enhance the proteins properties. These findings will result in a further enrichment of the research on the functional properties of protein and provide information to help in the development of protein enriched food products.

Kinetics and thermodynamics of β-cyclodextrin-NH2/β-carotene complexation: how much energy is required to include a hydrophobic group in the macrocycle cavity?

Kinetics and thermodynamics of β-cyclodextrin-NH2/β-carotene complexation: how much energy is required to include a hydrophobic group in the macrocycle cavity?