Hydrogenation Of Intermediates Research Articles

First-principle molecular dynamics and in situ DRIFTS study the stability of the intermediates of CO2 hydrogenation to methanol on ZnZrOx solid solution catalyst

Among the many catalysts used for CO2 hydrogenation to methanol, ZnZrOx solid solution is a highly efficient catalyst. Although the reaction mechanism has been widely explored at 0 K using DFT, critical aspects such as the atomic structure of the solid solution and the stability of reaction intermediates during CO2 reduction at experimental temperatures remain unclear. This study employs first-principle molecular dynamics (MD) simulations, FTIR and DRIFTS characterization to address these important questions. During the MD simulation, oxygen vacancies are formed in the system and same as the doped Zn atoms. The formation of oxygen vacancies was further confirmed by the Transmission FTIR and in situ DRIFTS. Due to the creating of oxygen vacancies, the coordination of Zn and Zr in the bulk is reduced to five and seven, respectively. And on the surface, their coordination is reduced to three、four and six、seven, respectively. Subsequently, the hydrogenation of CO2 to methanol using the formate and CO* pathways was studied. In the formate pathway, all intermediates remained stable at 593 K. However, in the CO* pathway, we observe instability of key intermediates which also confirmed by transmission FTIR and in situ DRIFTS characterization.

Two-dimensional MXene supported Ru-Cr(OH)x clusters as an efficient electrocatalyst for hydrogen oxidation reaction

The development of high-performance non-platinum catalysts remains a key challenge for the practical application of anion-exchange membrane fuel cells due to the sluggish kinetics response of the hydrogen oxidation reaction (HOR) in alkaline electrolytes. Herein, we report an outstanding HOR electrocatalyst using a facile one-step method with the two-dimensional double transition metal MXene (Mo2TiC2Tx) as a carrier mixed with metallic ruthenium and Cr(OH)x clusters (Ru-Cr(OH)x/MXene). Specifically, the as-prepared Ru-Cr(OH)x/MXene electrocatalyst exhibits a high apparent kinetic current (jk) of 18.32 mA cm−2 and exchange current (j0) of 1.64 mA cm−2 at an overpotential of 50 mV, respectively, which are 4.74 and 1.46 times as high as those of Pt/C catalyst. Additionally, mechanism experiments indicated that the Ru-Cr(OH)x/MXene electrocatalyst could attenuate the adsorption of hydrogen intermediate (Had) and enhance the adsorption of hydroxyl species (OHad) to promote CO oxidation, which resulted in a significant increase in the HOR activity and enhanced tolerance to CO. Furthermore, combining theoretical studies via density functional theory calculations, our work confirm that the interaction effect of each components of Ru-Cr(OH)x/MXene can optimize the binding energy of the Had and OHad for the HOR. This work develops a new approach to design of HOR electrocatalyst with MXene-based materials.

In Situ Carbon-Confined MoSe2 Catalyst with Heterojunction for Highly Selective CO2 Hydrogenation to Methanol.

The synthesis of methanol from CO2 hydrogenation is an effective measure to deal with global climate change and an important route for the chemical fixation of CO2. In this work, carbon-confined MoSe2 (MoSe2@C) catalysts were prepared by in situ pyrolysis using glucose as a carbon source. The physico-chemical properties and catalytic performance of CO2 hydrogenation to yield methanol were compared with MoSe2 and MoSe2/C. The results of the structure characterization showed MoSe2 displayed few layers and a small particle size. Owing to the synergistic effect of the Mo2C-MoSe2 heterojunction and in situ carbon doping, MoSe2@C with a suitable C/Mo mole ratio in the precursor showed excellent catalytic performance in the synthesis of methanol from CO2 hydrogenation. Under the optimal catalyst MoSe2@C-55, the selectivity of methanol reached 93.7% at a 9.7% conversion of CO2 under optimized reaction conditions, and its catalytic performance was maintained without deactivation during a continuous reaction of 100 h. In situ diffuse infrared Fourier transform spectroscopy studies suggested that formate and CO were the key intermediates in CO2 hydrogenation to methanol.

The copper size effect of CuZn/CeO2 catalyst in CO2 hydrogenation to methanol

The escalating emission of CO2 has caused a significant environmental impact. Hydrogenation of CO2 to methanol stands as the primary objective in the liquid sunlight vision, aiming to mitigate CO2 emissions. CuZn-based transition metal catalysts, known for their cost-effectiveness, demonstrate commendable catalytic performance at moderate temperatures and pressures, showcasing considerable potential in industrial applications. Consequently, a series of catalysts, composed of CuZn-based species supported on CeO2 with strategically introduced appropriate oxygen vacancies, were meticulously prepared. It worth to noting that the size of Cu was precisely tuned, along with the enhanced ability to the adsorption and activation of CO2 and H2. As a result, the optimal CuZn/CeO2 catalyst exhibits high methanol formation rate, recording at 433.4 gMeOH kgcat−1 h−1 with selectivity of 68.5% at 260 °C and 3 MPa. Simultaneously, the reaction path and the evolution of intermediates in CO2 hydrogenation was thoroughly delineated.

Electrochemical Generation of Te Vacancy Pairs in PtTe for Efficient Hydrogen Evolution.

Two-dimensional (2D) van der Waals materials are increasingly seen as potential catalysts due to their unique structures and unmatched properties. However, achieving precise synthesis of these remarkable materials and regulating their atomic and electronic structures at the most fundamental level to enhance their catalytic performance remain a significant challenge. In this study, we synthesized single-crystal bulk PtTe crystals via chemical vapor transport and subsequently produced atomically thin, large PtTe nanosheets (NSs) through electrochemical cathode intercalation. These NSs are characterized by a significant presence of Te vacancy pairs, leading to undercoordinated Pt atoms on their basal planes. Experimental and theoretical studies together reveal that Te vacancy pairs effectively optimize and enhance the electronic properties (such as charge distribution, density of states near the Fermi level, and d-band center) of the resultant undercoordinated Pt atoms. This optimization results in a significantly higher percentage of dangling O-H water, a decreased energy barrier for water dissociation, and an increased binding affinity of these Pt atoms to active hydrogen intermediates. Consequently, PtTe NSs featuring exposed and undercoordinated Pt atoms demonstrate outstanding electrocatalytic activity in hydrogen evolution reactions, significantly surpassing the performance of standard commercial Pt/C catalysts.

Hydrogen‐Induced Disproportionation of Samarium‐Cobalt Intermetallics Enabling Promoted Hydrogen Evolution Reaction Activity and Durability in Alkaline Media

AbstractTransition‐metal nanoparticles hold great promise as electrocatalysts for alkaline hydrogen evolution reaction (HER), however, addressing the simultaneous challenges of ensuring sufficient active sites, promoting favorable water dissociation, and optimizing binding energy toward hydrogen intermediates remains a formidable task. To overcome these hurdles, a novel gaseous hydrogen engineering strategy is proposed by in situ embedding cobalt nanoparticles within a samarium hydride matrix (Co/SmH2) via hydrogen‐induced disproportionation of SmCo5 particles for efficient alkaline HER. The as‐designed Co/SmH2 delivered an overpotential as low as 252 mV at 100 mA cm−2, surpassing the performance of pristine Co by 100 mV. Notably, this catalyst lasts remarkably long maintaining a durability at ≈500 mA cm−2 for 120 h. A combination of in situ Raman spectroscopy, in situ X‐ray absorption spectroscopy, density functional theory calculation and post‐HER characterizations unambiguously unveiled that the surface SmH2 transforms into samarium (hydr)oxide during electrocatalysis. This transformation not only inhibits the aggregation of the ultrafine cobalt nanoparticles but also significantly enhances the water dissociation and optimizes the binding energy of active cobalt species toward hydrogen intermediate, resulting in concurrent improvement of kinetics, thermodynamics, and stability of the HER process.

In Situ Engineering Multifunctional Active Sites of Ruthenium-Nickel Alloys for pH-Universal Ampere-Level Current-Density Hydrogen Evolution.

Developing robust non-platinum electrocatalysts with multifunctional active sites for pH-universal hydrogen evolution reaction (HER) is crucial for scalable hydrogen production through electrochemical water splitting. Here ultra-small ruthenium-nickel alloy nanoparticles steadily anchored on reduced graphene oxide papers (Ru-Ni/rGOPs) as versatile electrocatalytic materials for acidic and alkaline HER are reported. These Ru-Ni alloy nanoparticles serve as pH self-adaptive electroactive species by making use of in situ surface reconstruction, where surface Ni atoms are hydroxylated to produce bifunctional active sites of Ru-Ni(OH)2 for alkaline HER, and selectively etched to form monometallic Ru active sites for acidic HER, respectively. Owing to the presence of Ru-Ni(OH)2 multi-site surface, which not only accelerates water dissociation to generate reactive hydrogen intermediates but also facilitates their recombination into hydrogen molecules, the self-supported Ru90Ni10/rGOP hybrid electrode only takes overpotential of as low as ≈106mV to deliver current density of 1000mAcm-2, and maintains exceptional stability for over 1000h in 1 m KOH. While in 0.5 m H2SO4, the Ru90Ni10/rGOP hybrid electrode exhibits acidic HER catalytic behavior comparable to commercially available Pt/C catalyst due to the formation of monometallic Ru shell. These electrochemical behaviors outperform some of the best Ru-based catalysts and make it attractive alternative to Pt-based catalysts toward highly efficient HER.

Electrocatalytic Conversion of Nitrate Into Ammonia Through Heterogeneous Catalysis of NiMoO4 and Cu/Cu2O

AbstractFacilitating equilibrium in the nitrogen cycle, electrochemical nitrate reduction (NitRR) to ammonia stands as a carbon‐free method for ammonia synthesis. Copper‐based catalysts, renowned for NitRR, face a hurdle in supplying sufficient hydrogen radicals (*H) for efficient hydrogenation of NitRR intermediates. Addressing this, NiMoO4 is leveraged as an excellent *H donor, synergistically coupling it with a copper‐based catalyst. The work introduces a high‐performance NiMoO4/CuO nanowire (NW)/Copper foam (CF) catalyst for NitRR, achieving a remarkable Faraday efficiency (FE) of 98.8% and a yield of 0.8221 mmol cm−2 h−1. Operating at −0.2 V versus reversible hydrogen electrode (vs RHE) in an H‐type electrolytic cell, the catalyst demonstrates exceptional stability over 20 h. Additionally, coupling NitRR with an air stripping process enables efficient collection of NH4Cl products, offering a practical avenue for converting waste nitrates into valuable ammonia products. In‐depth in situ electrochemistry and density‐functional theory (DFT) calculations affirm the transformation of CuO into Cu/Cu2O during the electrocatalytic reduction process. Cu/Cu2O catalyzes nitrate conversion to nitrite, while NiMoO4, serving as a *H donor, facilitates deoxidation and hydrogenation of other N intermediates on the Cu/Cu2O surface, effectively driving the reduction of nitrate to ammonia.

Asymmetric coordination engineering of active centers in MXene-based single atom catalysts for high-performance ECO2RR

Asymmetric coordination effect is an important concept in heterogeneous catalysis where both catalytic activity and product selectivity are serious influenced. However, this effect has rarely been understood because of the difficult in characterizing detailed coordination information. Here, by employing a theoretical study on electrocatalytic CO2 reduction reaction (ECO2RR) towards HCOOH over Ti3C2O2-based NS/NN co-coordinated transition metal single atom catalysts (TM-NS/NN-Ti3C2O2 SACs), we show that asymmetric coordination environments have great impact on the electronic structure of the active center. Both electron transferring ability and spin polarization of the active center are vital to optimize the adsorption and hydrogenation of key intermediates. As a result, both catalytic activity and product selectivity can be maximized. V-NN-Ti3C2O2 are predicted to promote high-throughput HCOOH generation process at operation applied potential of −0.32 with considerable electrochemical stability, surpassing most reported catalysts. This work demonstrates V-NN-Ti3C2O2 as high-performance ECO2RR catalysts, and highlights that the introduction of the concept of asymmetric coordination effect may offer a new insight into the rational design of more efficient SACs.

Subnanometric Osmium Clusters Confined on Palladium Metallenes for Enhanced Hydrogen Evolution and Oxygen Reduction Catalysis.

Highly efficient, cost-effective, and durable electrocatalysts, capable of accelerating sluggish reaction kinetics and attaining high performance, are essential for developing sustainable energy technologies but remain a great challenge. Here, we leverage a facile heterostructure design strategy to construct atomically thin Os@Pd metallenes, with atomic-scale Os nanoclusters of varying geometries confined on the surface layer of the Pd lattice, which exhibit excellent bifunctional properties for catalyzing both hydrogen evolution (HER) and oxygen reduction reactions (ORR). Importantly, Os5%@Pd metallenes manifest a low η10 overpotential of only 11 mV in 1.0 M KOH electrolyte (HER) as well as a highly positive E1/2 potential of 0.92 V in 0.1 M KOH (ORR), along with superior mass activities and electrochemical durability. Theoretical investigations reveal that the strong electron redistribution between Os and Pd elements renders a precise fine-tuning of respective d-band centers, thereby guiding adsorption of hydrogen and oxygen intermediates with an appropriate binding energy for the optimal HER and ORR.

Pd-Decorated Cu2O-Ag Catalyst Promoting CO2 Electroreduction to C2H4 by Optimizing CO Intermediate Adsorption and Hydrogenation.

Electrocatalytic CO2 reduction reaction (CO2RR) to high value-added products, such as ethylene (C2H4), offers a promising approach to achieve carbon neutrality. Although recent studies have reported that a tandem catalyst (for example, Cu-Ag systems) exhibits advantage in C2H4 production, its practical application is largely inhibited by the following: (1) a traditional tandem catalyst cannot effectively stabilize the *CO intermediate, resulting in sluggish C-C coupling, and (2) inadequate H2O activation ability hinders the hydrogenation of intermediates. To break through the above bottleneck, herein, palladium (Pd) was introduced into Cu2O-Ag, a typical conventional tandem catalyst, to construct a Cu2O-Pd-Ag ternary catalyst. Extensive experiment and density functional theory calculation prove that Pd can efficiently stabilize the *CO intermediate and promote the H2O activation, which contributes to the C-C coupling and intermediate hydrogenation, the key steps in the conversion of CO2 to C2H4. Beneficial to the efficient synergy of Cu2O, Pd, and Ag, the optimal Cu2O-Pd-Ag ternary catalyst achieves CO2RR toward C2H4 with a faradaic efficiency of 63.2% at -1.2 VRHE, which is higher than that achieved by Cu2O-Ag and most of other reported catalysts. This work is a fruitful exploration of a rare ternary catalyst, providing a new route for constructing an efficient CO2RR electrocatalyst.

Ruthenium-induced hydrolysis effect on Fe2O3 nanoarrays for high-performance electrochemical nitrate reduction to ammonia

Electrochemical nitrate reduction (NO3-RR) to ammonia (NH3) has become an attractive pathway for sewage remediation and ammonia synthesis. However, the NO3- electroreduction reaction remains hindered by the sluggish multi-proton involved steps without sufficient proton supply. Herein, we designed Ru nanoparticles (NPs) loaded onto ferric oxide nanoarrays (Ru-Fe2O3) catalysts with hydrolysis effect for high-efficient NH3 production. Ru-Fe2O3 exhibits an impressive ammonia yield and faraday efficiency (209–329 μmol cm−2 h−1 and 45.2–72.8%, respectively). Ru-induced hydrolysis promotes the hydrogenation of the reaction intermediates in the process (H2O+e−→H*+OH−) by accelerating the generation of localized protons at the reactive sites. More importantly, this effect can further accelerate the H*-mediated indirect reduction pathway and the electron-mediated direct reduction pathway. These findings underscore the importance of relating NO3-RR performance with nanometallic particles-supported electrodes to advance catalyst design and operation.

Modulating the d-Band Center of Palladium via Ethylene Glycol Modification: Accelerating Had Desorption for Enhanced Formate Electrooxidation.

This study addresses the critical challenge in alkaline direct formate fuel cells (DFFCs) of slow formate oxidation reaction (FOR) kinetics as a result of strong hydrogen intermediate (Had) adsorption on Pd catalysts. We developed WO3-supported Pd nanoparticles (EG-Pd/WO3) via an organic reduction method using ethylene glycol (EG), aiming to modulate the d-band center of Pd and alter Had adsorption dynamics. Cyclic voltammetry demonstrated significantly improved Had desorption kinetics in EG-Pd/WO3 catalysts. Density functional theory (DFT) calculations revealed that the presence of EG reduces the d-band center of Pd, leading to weaker Pd-H bonds and enhanced Had desorption during the FOR. This research provides a new approach to optimize catalyst efficiency in DFFCs, highlighting the potential for more effective and sustainable energy solutions through advanced material engineering.

Synergistic Effects of Silica-Supported Iron-Cobalt Catalysts for CO2 Reduction to Prebiotic Organics.

To test the ability of geochemical surfaces in serpentinizing hydrothermal systems to catalyze reactions from which metabolism arose, we investigated H2-dependent CO2 reduction toward metabolic intermediates over silica-supported Co-Fe catalysts. Supported catalysts converted CO2 to various products at 180 °C and 2.0 MPa. The liquid product phase included formate, acetate, and ethanol, while the gaseous product phase consisted of CH4, CO, methanol, and C2-C7 linear hydrocarbons. The 1/1 ratio CoFe alloy with the same composition as the natural mineral wairauite yielded the highest concentrations of formate (6.0 mM) and acetate (0.8 mM), which are key intermediates in the acetyl-coenzyme A (acetyl-CoA) pathway of CO2 fixation. While Co-rich catalysts were proficient at hydrogenation, yielding mostly CH4, Fe-rich catalysts favored the formation of CO and methanol. Mechanistic studies indicated intermediate hydrogenation and C-C coupling activities of alloyed CoFe, in contrast to physical mixtures of both metals. Co in the active site of Co-Fe catalysts performed a similar reaction as tetrapyrrole-coordinated Co in the corrinoid iron-sulfur (CoFeS) methyl transferase in the acetyl-CoA pathway. In a temperature range characteristic for deeper regions of serpentinizing systems, oxygenate product formation was favored at lower, more biocompatible temperatures.

Modulate the surface charge toward efficient hydrogen evolution reaction: Electronic structure engineering of MoB-Ni3B interface

Rationally regulated the surface electronic structure of catalysts hold the key to enhance the kinetics of hydrogen evolution reaction (HER). Herein, we propose an electronic structure engineering strategy to modulate the surface charge of Ni3B by introducing MoB for high-efficient HER. The MoB-Ni3B interface exhibits characteristic lattice expansion and results in electron modulation between the Ni3B and MoB. Density functional theory calculations further indicate that the introduction of MoB leads to electron enrichment around Ni sites, which further activate Ni sites, weaken the adsorption of hydrogen intermediates and thus facilitate the unfavorable hydrogen desorption, resulting in the Gibbs free adsorption energy closer to zero. As expected, the hierarchical MoB-Ni3B displays an ultra-low overpotential (η10 = 35 and 57 mV for reaching a current density of −10 mA cm−2) in 1.0 M KOH and 0.5 M H2SO4, which is comparable to the commercial Pt catalyst and confirms the positive effect of the modulation of electronic structure on the kinetics and catalytic activity. The effectiveness of the electronic structure engineering strategy is expected to shed light on the construction of more advanced electrocatalysts.

INVESTIGATION OF THE TRANSFORMATION OF MODEL PETROLEUM RAW MATERIALS UNDER CRACKING CONDITIONS OVER A REGENERATED SPENT HYDROTREATMENT CATALYST

The physicochemical properties and catalytic activity of regenerated spent aluminium-cobalt-molybdenum hydrotreatment catalyst have been investigated under cracking conditions in the model systems n-dodecane - toluene and decalin - toluene - n-hexane. A series of experiments to study the catalytic activity of the sample was carried out using a flow-type laboratory installation within the temperature range 430-470 °C, nitrogen pressure 1.6 MPa, liquid hourly space velocity 0.5-3.0 h-1. The directions of transformation were determined for paraffin and naphthenic hydrocarbons by means of gas chromatography - mass spectrometry. Paraffin hydrocarbons enter into cracking, isomerisation and compaction reactions. Naphthenic hydrocarbons are transformed into the products of isomerisation, dehydrogenation and compaction. Predominant dehydrogenation of decalin with the formation of naphthalene and hydrogen is observed in the system under investigation. A positive role of hydrogen in thermodestructive processing of heavy oil residues is observed due to the hydrogenation of nonlinear olefin hydrocarbons and aromatic hydrocarbon intermediates, which decreases the rate of coke formation. The corresponding reaction rate constants were calculated, and the results were analysed. Conclusions are drawn about the prospects of introducing a regenerated spent hydrotreatment catalyst into the procedure of thermodestructive processing of heavy oil residues.

Kinetic and DRIFTS studies of the CO2 catalytic hydrogenation on Ru/SiO2: A comprehensive and strategic investigation of CO2 methanation mechanisms by kinetic modeling and data regression

The kinetics of the CO2 hydrogenation/methanation is investigated on a Ru/SiO2 catalyst. Diffuse reflectance infrared Fourier transform spectroscopy experiments attest the presence of linearly adsorbed and bridge-bonded carbonyls on the metallic sites, as well as bicarbonate and formate species. Kinetic assessments at different temperatures and partial pressures show a direct relationship between methane turnover frequency and H2 pressure, suggesting that H* is involved in the rate-determining step. Contrariwise, increases in CO2 pressure inhibited methane formation. Applying Langmuir-Hinshelwood kinetics and non-linear regression, strategic kinetic models for CH4 formation rate were conceived and tested. The best model indicates that methanation starts off with CO2 dissociation into CO*reactive, proceeding along a H*-assisted pathway. The model also points out that competing oxygenated species (O*, HO*), intrinsically generated by CO2 activation, are hydrogenated faster on key sites, hindering the hydrogenation of carbon intermediates, which explained the inhibitory effect observed when CO2 pressure was increased.

Sustainable conversion of alkaline nitrate to ammonia at activities greater than 2 A cm−2

Nitrate (NO3‒) pollution poses significant threats to water quality and global nitrogen cycles. Alkaline electrocatalytic NO3‒ reduction reaction (NO3RR) emerges as an attractive route for enabling NO3‒ removal and sustainable ammonia (NH3) synthesis. However, it suffers from insufficient proton (H+) supply in high pH conditions, restricting NO3‒-to-NH3 activity. Herein, we propose a halogen-mediated H+ feeding strategy to enhance the alkaline NO3RR performance. Our platform achieves near-100% NH3 Faradaic efficiency (pH = 14) with a current density of 2 A cm–2 and enables an over 99% NO3–-to-NH3 conversion efficiency. We also convert NO3‒ to high-purity NH4Cl with near-unity efficiency, suggesting a practical approach to valorizing pollutants into valuable ammonia products. Theoretical simulations and in situ experiments reveal that Cl-coordination endows a shifted d-band center of Pd atoms to construct local H+-abundant environments, through arousing dangling O-H water dissociation and fast *H desorption, for *NO intermediate hydrogenation and finally effective NO3‒-to-NH3 conversion.

Development of a One-Step Synthesis of oxa-Spirocyclic Diphosphine Ligands Driven by Their Application in the Industrial Synthesis of Sacubitril.

Herein we have developed a highly practical and efficient one-step coupling protocol for the synthesis of chiral spiro diphosphine ligands, especially for the oxa-spiro diphosphine ligands O-SDP, which showed excellent reactivity and diastereoselectivity in the asymmetric hydrogenation of a key intermediate of Sacubitril. It should be noted that the one-step coupling protocol could be operated on a kilogram scale, and the resulting ruthenium catalyst of O-SDP could hydrogenate the key intermediate of Sacubitril on an industrial scale.

Alleviating the competitive adsorption of hydrogen and hydroxyl intermediates on Ru by d–p orbital hybridization for hydrogen electrooxidation

Promoted hydrogen oxidation reaction kinetics in alkaline electrolytes and enlarged effective potential range were achieved simultaneously by alleviating the competitive adsorption of hydrogen and hydroxyl intermediates.