Hydrogel For Wound Healing Research Articles

Synthesis of Injectable Thermosensitive Cinnamaldehyde-Loaded Chitosan Hydrogel for Antibacterial and Wound Dressing Application

The wound healing in the presence of bacterial infections is a complex process and prolonged challenge with severe implications for human health. To address this issue, injectable thermo-sensitive hydrogels as wound dressings have garnered considerable attention as a potential solution. In this study, we have developed an injectable and antibacterial thermosensitive hydrogel for wound healing, based on chitosan (CS) and β-glycerophosphate (β-GP) and modified with a range of cinnamaldehyde (CA). The CS/β-GP/CA gels demonstrate a phase transition at body temperatures, and exhibit good biocompatibility. Compared with the unmodified CS/β-GP hydrogels, incorporating CA can promote endothelial cell growth and the antibacterial property of the hydrogel system, which may lead to faster wound healing and tissue regeneration. Our findings suggest that the CS/β-GP/CA thermosensitive hydrogel emerges as a promising candidate for an injectable wound dressing in wound treatments.

Design and Self-Assembly of Peptide-Copolymer Conjugates into Nanoparticle Hydrogel for Wound Healing in Diabetes.

Delayed wound healing in skin injuries has become a significant problem in clinics, seriously affecting and even threatening life and health. Recently, research interest has increased in developing wound dressings containing bioactive compounds capable of improving outcomes for complex healing needs. In this study, Puerarin-loaded nanoparticles (Pue-NPs) were prepared using the cell-penetrating peptide-poly (lactic-co-glycolic acid) (CPP-PLGA) as a drug carrier by the emulsified solvent evaporation method. Then, they were added into poly (acrylic acid) to obtain a self-assembled nanocomposite hydrogels (SANHs) drug delivery system using the co-polymerization method. The particle size, zeta potential, and micromorphology of Pue-NPs were measured; the appearance, mechanical properties, adhesive strength, and biological activity of SANHs were performed. Finally, the potential of SANHs for wound healing was further evaluated in streptozotocin-induced diabetic mice. Pue-NPs were regularly spherical, with an average particle size of 134.57 ± 1.42 nm and a zeta potential of 2.14 ± 0.78 mV. SANHs was colorless and transparent with a honeycomb-like porous structure and had an excellent swelling ratio (917%), water vapor transmission rate (3077 g·m-2·day-1), mechanical properties (Young's modulus of 18 kPa, elongation at break of 307%), and adhesive strength (15.5 kPa). SANHs exhibited sustained release of Pue over 48h, with a cumulative release of 55.60 ± 6.01%. In vitro tests revealed that the SANHs presented a 92.22% antibacterial rate against Escherichia coli after 4h, and a 61.91% scavenging rate of 1.1-diphenyl-2-trinitrophenylhydrazine (DPPH) radical. In vivo experiments showed that SANHs accelerated wound repair by reducing the inflammatory response at the wound site, promoting angiogenesis, and facilitating epidermal regeneration and collagen deposition. In conclusion, we successfully prepared SANHs. Our results show that SANHs have excellent performance and improves wound healing in diabetic mice model, indicating that it can be used to develop an effective strategy for the treatment of diabetic wounds.

Recent Advances of Chitosan-Based Hydrogels for Skin-Wound Dressings.

The management of wound healing represents a significant clinical challenge due to the complicated processes involved. Chitosan has remarkable properties that effectively prevent certain microorganisms from entering the body and positively influence both red blood cell aggregation and platelet adhesion and aggregation in the bloodstream, resulting in a favorable hemostatic outcome. In recent years, chitosan-based hydrogels have been widely used as wound dressings due to their biodegradability, biocompatibility, safety, non-toxicity, bioadhesiveness, and soft texture resembling the extracellular matrix. This article first summarizes an overview of the main chemical modifications of chitosan for wound dressings and then reviews the desired properties of chitosan-based hydrogel dressings. The applications of chitosan-based hydrogels in wound healing, including burn wounds, surgical wounds, infected wounds, and diabetic wounds are then discussed. Finally, future prospects for chitosan-based hydrogels as wound dressings are discussed. It is anticipated that this review will form a basis for the development of a range of chitosan-based hydrogel dressings for clinical treatment.

Plant-Based Films and Hydrogels for Wound Healing.

Skin is constantly exposed to injury and infectious agents that can compromise its structural integrity and cause wounds. When this occurs, microorganisms from the skin microbiota and external bacteria and fungi can penetrate the wound and cause an infection, which complicates the healing process. Nowadays, there are several types of wound dressings available to treat wounds, some of which are incorporated with antimicrobial agents. However, the number of microorganisms resistant to these substances is rising. Therefore, the search for new, natural alternatives such as essential oils (EOs) and plant extracts (PEs) is on the rise. However, these substances present some limitations (poor bioavailability and poor target capacity), which limits their efficiency. Their incorporation in formulations in the form of films and hydrogels (HGs) can help to overcome these issues and may be a potential alternative to the current treatments. HGs and films incorporated with PEs and EOs have antimicrobial activity, promote the viability of skin cells and fibroblast migration, and are non-toxic and biocompatible. This review discusses the use of films and HGs for the topical delivery of EOs and PEs for wound treatment and their formulations as effective wound dressings, while debating some mechanisms and biological properties to elucidate their presumptive clinical relevance and possible applications.

Synchronous semi-solid extrusion and photopolymerization of antimicrobial dressing hydrogel for wound healing

Bacterial infections at wound sites require more time for a fast and efficient wound-healing process. Antibacterial methyl cellulose-based hydrogel wound dressing can be an excellent option because it can show antibacterial action, absorb wound exudates, and have a cooling and soothing effect on the wound bed. The ultraviolet (UV) ray-assisted semi-solid extrusion 3D printing technique was used to prepare 3D printed construct into a high surface area mesh-like structure utilizing UV radiation for photocrosslinking of hydrogel matrix in the presence of Poly (ethylene glycol) Diacrylate. The prepared hydrogel was characterized for contact angle, and rheological analysis before semi-solid extrusion-based 3D printing. After optimization of printing parameters, the 3D printed mesh was subjected to physicochemical characterizations like dimensional analysis, swelling study, drug content, in vitro drug release, and in vitro antimicrobial activity study. A rheological analysis confirmed the viscosity, thixotropy, and viscoelastic nature of prepared hydrogel. Drug release study showed approximately 50 % release in 4 h, and >80 % drug release in 24 h. After optimization of one batch, hydrogel polymerization was done by functional group analysis followed by validation of thread thickness by electron microscopy images and mechanical property assessment. The 3D-printed mesh was further evaluated for its in-vitro antibacterial performance against Escherichia coli and Staphylococcus aureus. The area of inhibition was one-fold more in Staphylococcus aureus and two-fold in E. coli, ensuring diffusion of the drug from 3D printed mesh and killing of bacteria. The work reported herein represents a universal platform to generate multifunctional and customized hydrogels with various functional substances for wound dressing applications.

Multifunctional hydrogels for wound healing

Abstract The process of wound healing is complex and dynamic. Given the unique nature of the skin, wound healing requires dressings that meet a wide range of functional requirements. Due to their unique structure and properties, hydrogel dressings provide ideal conditions for supporting the process of wound healing and can be enhanced with additional functions to meet the specific requirements of different types of wounds. Compared to traditional wound dressings, the newly developed hydrogel wound dressing offers several advantages, including its soft texture, ability to retain moisture, oxygen permeability, and comfort. With the advancement of medical technology, higher demands are being placed on the functionality of hydrogel dressings. Therefore, this paper offers a comprehensive overview of hydrogel wound dressings with various functions. These functions primarily include hemostatic hydrogel dressings, antibacterial hydrogel dressings, angiogenesis-promoting hydrogel dressings, and other functional hydrogel dressings. The paper also reviews the research and application of these dressings in recent years.

Multifunctional self-healing peptide hydrogel for wound healing

The complete healing of wounds remains a challenge in clinical care. In addition, various complications such as inflammation and infection that may occur during skin wound healing can impede the healing process. Here, we constructed a multifunctional self-repairing hydrogel by utilizing Schiff base bonds. This hydrogel exhibited good self-healing properties and could cope with destructive external influences. The self-healing hydrogel was injectable, ensuring that the hydrogel dressing adhered to the wound. Carboxymethyl chitosan and oxidized chondroitin sulfate demonstrated good biocompatibility and multiple bioactivities and were successfully used to prepare self-healing hydrogels. Meanwhile, the SIKVAV biopeptide was less expensive and more morphologically stable than vascular endothelial growth factor and had a high pro-angiogenic activity. Thus, the SIKVAV biopeptide was cross-linked to the oxidized chondroitin sulfate of the hydrogel through covalent bonding to avoid rapid biopeptide degradation, achieving a slow release of the drug. This peptide hydrogel exhibited good biocompatibility and antimicrobial properties; moreover, experiments conducted on mice revealed that it could effectively promote angiogenesis and skin tissue repair. These findings suggest that the injectable self-repairing peptide hydrogel may facilitate skin wound healing and other applications.

A comprehensive exploration of hydrogel applications in multi-stage skin wound healing.

Hydrogels, as an emerging biomaterial, have found extensive use in the healing of wounds due to their distinctive physicochemical structure and functional properties. Moreover, hydrogels can be made to match a range of therapeutic requirements for materials used in wound healing through specific functional modifications. This review provides a step-by-step explanation of the processes involved in cutaneous wound healing, including hemostasis, inflammation, proliferation, and reconstitution, along with an investigation of the factors that impact these processes. Furthermore, a thorough analysis is conducted on the various stages of the wound healing process at which functional hydrogels are implemented, including hemostasis, anti-infection measures, encouraging regeneration, scar reduction, and wound monitoring. Next, the latest progress of multifunctional hydrogels for wound healing and the methods to achieve these functions are discussed in depth and categorized for elucidation. Finally, perspectives and challenges associated with the clinical applications of multifunctional hydrogels are discussed.

Antibacterial polylysine-containing hydrogels for hemostatic and wound healing applications: preparation methods, current advances and future perspectives.

The treatment of various types of wounds such as dermal wounds, multidrug resistant bacteria-infected wounds, and chronic diabetic wounds is one of the critical challenges facing healthcare systems. Delayed wound healing can impose a remarkable burden on patients and health care professionals. In this case, given their unique three-dimensional porous structure, biocompatibility, high hydrophilicity, capability to provide a moist environment while absorbing wound exudate, permeability to both gas and oxygen, and tunable mechanical properties, hydrogels with antibacterial function are one of the most promising candidates for wound healing applications. Polylysine is a cationic polymer with the advantages of inherent antibacterial properties, biodegradability, and biocompatibility. Therefore, its utilization to engineer antibacterial hydrogels for accelerating wound healing is of great interest. In this review, we initially discuss polylysine properties, and then focus on the most recent advances in polylysine-containing hydrogels (since 2016) prepared using various chemical and physical crosslinking methods for hemostasis and wound healing applications. Finally, the challenges and future directions in the engineering of these antibacterial hydrogels for wound healing are discussed.

An in situ forming gelatin-based hydrogel loaded with soluble amniotic membrane promotes full-thickness wound regeneration in rats.

Early effective treatment and appropriate coverage are vital for full-thickness wounds. Amnion membrane-derived products have recently emerged in tissue engineering. However, the optimal concentration, carrier for controlled release, and handling have remained challenges. This study aims to develop and optimize an in situ forming, amniotic-based hydrogel for wound healing. Here, a composite matrix was fabricated with gelatin hydrogel modified with methacrylate functional group conjugated (GelMA) and keratose (wt.1%), loaded with mesenchymal stem cells (MSCs, 1×105 cell/ml) and optimized soluble amniotic membrane (SAM, 0.5 mg/ml). The physicochemical properties of the final subject were evaluated in vitro and in vivo environments. The results of the in vitro assay demonstrated that conjugation of the methacryloyl group with gelatin resulted in the formation of GelMA hydrogel (26.7±1.2 kPa) with higher mechanical stability. Modification of GelMA with a glycosaminoglycan sulfate (Keratose) increased controlled delivery of SAM (47.3% vs. 84.3%). Metabolic activity (93%) and proliferation (21.2 ± 1.5 µg/ml) of MSCs encapsulated in hydrogel improved by incorporation of SAM (0.5 mg/ml). Furthermore, the migration of fibroblasts was facilitated in the scratched assay by SAM (0.5 mg/ml)/MSCs (1×105 cell/ml) conditioned medium. The GelMA hydrogel groupes revealed regeneration of full-thickness skin defects in rats after 3 weeks due to the high angiogenesis (6.3 ± 0.3), cell migration, and epithelialization. The results indicated in situ forming and tunable GelMA hydrogels containing SAM and MSCs could be used as efficient substrates for full-thickness wound regeneration.

Sodium hyaluronate hydrogel for wound healing and human health monitoring based on deep eutectic solvent

Hydrogel dressings traditionally promote wound healing by maintaining moisture and preventing infection rather than by actively stimulating the skin to regulate cell behavior. Electrical stimulation (ES) is known to modulate skin cell behavior and to promote wound healing. This study describes the first multifunctional conductive hydrogel for wound healing and health monitoring based on a deep eutectic solvent (DES). Sodium hyaluronate and polydopamine constituted the hydrogel skeleton, and tea tree oil and Panax notoginseng extract were used as the active ingredients to induce adhesion, promote antioxidant and antibacterial activity, and support biocompatibility of the hydrogel. The inclusion of DES increases the temperature resistance of the hydrogel and improves its environmental adaptability. We used a small, portable coin battery-powered to provide electrical stimulation. Treatment with both the hydrogel and ES resulted in a stronger therapeutic effect than that provided by the commercial DuoDERM dressing. The hydrogel detected movement and strain when applied as a sensor. Overall, this study reports the development of a multifunctional conductive hydrogel dressing based on DES as a wound healing and health monitor.

Recent advances on 3D-bioprinted gelatin methacrylate hydrogels for tissue engineering in wound healing: A review of current applications and future prospects.

Advancements in 3D bioprinting, particularly the use of gelatin methacrylate (GelMA) hydrogels, are ushering in a transformative era in regenerative medicine and tissue engineering. This review highlights the pivotal role of GelMA hydrogels in wound healing and skin regeneration. Its biocompatibility, tunable mechanical properties and support for cellular proliferation make it a promising candidate for bioactive dressings and scaffolds. Challenges remain in optimizing GelMA hydrogels for clinical use, including scalability of 3D bioprinting techniques, durability under physiological conditions and the development of advanced bioinks. The review covers GelMA's applications from enhancing wound dressings, promoting angiogenesis and facilitating tissue regeneration to addressing microbial infections and diabetic wound healing. Preclinical studies underscore GelMA's potential in tissue healing and the need for further research for real-world applications. The future of GelMA hydrogels lies in overcoming these challenges through multidisciplinary collaboration, advancing manufacturing techniques and embracing personalized medicine paradigms.

Sprayable Ti3C2 MXene hydrogel for wound healing and drug release system

Wound healing is a critical process that facilitates the body's recovery from injuries and helps prevent infections, thereby maintaining overall tissue and organ functionality. However, delayed wound healing owing to various factors can lead to bacterial infections and secondary complications. In this study, a ciprofloxacin (CIP)-loaded MXene/sodium alginate (SA) hydrogel was fabricated to inhibit bacterial infections and enhance wound healing. The hydrogel was formulated in a sprayable state by blending CIP-loaded MXene (CIP-MX) with SA. This hydrogel was found to exhibit excellent photothermal conversion capability and biocompatibility under near-infrared (NIR) irradiation. In addition, the hydrogel enabled controlled drug release based on NIR irradiation, ultimately enabling improved antibacterial activity. Based on the in vitro and in vivo experiments, the CIP-loaded MXene/SA hydrogel (CIP-MX@Gel) accelerated wound healing. Overall, the CIP-MX@Gel has excellent potential as an effective wound healing material.

Stimuli-Responsive 3D Printable Conductive Hydrogel: A Step toward Regulating Macrophage Polarization and Wound Healing.

Conductive hydrogels (CHs) are promising alternatives for electrical stimulation of cells and tissues in biomedical engineering. Wound healing and immunomodulation are complex processes that involve multiple cell types and signaling pathways. 3D printable conductive hydrogels have emerged as an innovative approach to promote wound healing and modulate immune responses. CHs can facilitate electrical and mechanical stimuli, which can be beneficial for altering cellular metabolism and enhancing the efficiency of the delivery of therapeutic molecules. This review summarizes the recent advances in 3D printable conductive hydrogels for wound healing and their effect on macrophage polarization. This report also discusses the properties of various conductive materials that can be used to fabricate hydrogels to stimulate immune responses. Furthermore, this review highlights the challenges and limitations of using 3D printable CHs for future material discovery. Overall, 3D printable conductive hydrogels hold excellent potential for accelerating wound healing and immune responses, which can lead to the development of new therapeutic strategies for skin and immune-related diseases.

Application of photo-crosslinkable gelatin methacryloyl in wound healing

Wound healing is a complex and coordinated biological process easily influenced by various internal and external factors. Hydrogels have immense practical importance in wound nursing because of their environmental moisturising, pain-relieving, and cooling effects. As photo-crosslinkable biomaterials, gelatine methacryloyl (GelMA) hydrogels exhibit substantial potential for tissue repair and reconstruction because of their tunable and beneficial properties. GelMA hydrogels have been extensively investigated as scaffolds for cell growth and drug release in various biomedical applications. They also hold great significance in wound healing because of their similarity to the components of the extracellular matrix of the skin and their favourable physicochemical properties. These hydrogels can promote wound healing and tissue remodelling by reducing inflammation, facilitating vascularisation, and supporting cell growth. In this study, we reviewed the applications of GelMA hydrogels in wound healing, including skin tissue engineering, wound dressing, and transdermal drug delivery. We aim to inspire further exploration of their potential for wound healing.

Dual-adhesive and self-healing alginate-based hydrogel for wound healing

Some of the wound dressings on the market cause skin tearing and bleeding when removed, slowing the healing process. So, it is difficult to treat infected wounds of sensitive skin patients. Herein, antibacterial and biocompatibility self-healing hydrogel loaded with 9-Aminoacridine and kanamycin sulfate were prepared by grafting poly(β-carboxyethyl acrylate-co-acrylamide) onto sodium alginate. The biological assay demonstrated the hydrogels’ good biocompatibility, which showed no harmful effects on normal human melanocyte cells. In addition, the hydrogels had a powerful antibacterial impact on the various bacterial strains utilized in the investigation. From the study of the rheological properties of the prepared hydrogel, it was found that it is a non-Newtonian fluid. These results suggest the possible utilization of the as-prepared hydrogels in the fabrication of wound healing.

Multifunctional hydrogels for chronic wounds repairing

AbstractBecause of their tissue‐like mechanical performances, high biocompatibility, and adjustable functionality, hydrogels have become increasingly attractive materials for promoting wound healing. Chronic wounds include burn, diabetic, and infected wounds. Unlike common incision wounds, chronic wounds are more challenging to heal. To meet the clinical needs, multifunctional hydrogels should be fabricated and investigated. To guide future studies on the fabrication of hydrogel‐based chronic wound dressings, a review of advanced multifunctional hydrogels is necessary. Various hydrogels with advanced properties, such as antibacterial, antioxidant, bioadhesive, anti‐inflammatory, and wound healing properties, that can be used for skin burn wounds and diabetic wounds are summarised. Lastly, the prospects of advanced hydrogels for wound healing are elaborated.

Application of Chitosan-Based Polysaccharide Biomaterials in Tissue Engineering

Chitosan-based polysaccharide biomaterials have gained interest as viable options in tissue engineering due to their distinctive properties and wide range of potential applications. Biomaterials play a crucial role in regenerative medicine because they foster an environment conducive to cell growth and tissue repair. The chitin-derived polysaccharide chitosan is superior than synthetic materials in several ways: it has a similar structure to the extracellular matrix, is biocompatible, biodegradable, antimicrobial, and can incorporate bioactive chemicals. In this article, check how chitosan can be used in tissue engineering as a scaffold for different types of tissue, a hydrogel for wound healing, and a carrier for gene therapy, stem cell culture, and drug delivery. Scaffolds made from chitosan have shown tremendous promise in tissue engineering for the neurological system, bone and cartilage transplantation, and skin regeneration. Hydrogels made from chitosan have been shown to be useful in treating wounds and stopping bleeding. Chitosan's medicinal potential in gene therapy, stem cell culture, and targeted medication administration is further enhanced by the addition of bioactive components such as growth factors, genes, or medicines. In addition, using chitosan in tissue engineering can pave the way for future developments in stem cell techniques, nanotechnology, biofabrication, and 3D bioprinting, among other areas of study. These advances may one day lead to individualized and highly effective therapies for tissue repair and regeneration. The use of chitosan in tissue engineering has the potential to advance regenerative medicine and address the growing demand for more effective techniques to heal damaged tissues. Tissue engineers can revolutionize the field of regenerative medicine and enhance patient outcomes by taking use of chitosan's adaptability and bioactivity to create cutting-edge biomaterials and therapeutic techniques.

Preparation and evaluation of Thesium chinense extract loaded polyvinyl alcohol/sodium alginate hydrogel for wound healing

Preparation and evaluation of Thesium chinense extract loaded polyvinyl alcohol/sodium alginate hydrogel for wound healing

Thermosensitive black phosphorus hydrogel loaded with silver sulfadiazine promotes skin wound healing

Wounds can lead to skin and soft tissue damage and their improper management may lead to the growth of pathogenic bacteria at the site of injury. Identifying better ways to promote wound healing is a major unmet need and biomedical materials with the ability to promote wound healing are urgently needed. Here, we report a thermosensitive black phosphorus hydrogel composed of black phosphorus nano-loaded drug silver sulfadiazine (SSD) and chitosan thermosensitive hydrogel for wound healing. The hydrogel has temperature-sensitive properties and enables the continuous release of SSD under near-infrared irradiation to achieve synergistic photothermal and antibacterial treatment. Additionally, it exerts antibacterial effects on Staphylococcus aureus. In a rat skin injury model, it promotes collagen deposition, boosts neovascularization, and suppresses inflammatory markers. In summary, the excellent thermosensitivity, biocompatibility, and wound-healing-promoting qualities of the reported thermosensitive hydrogel make it suitable as an ideal wound dressing in the clinic.