Hydrogels For Tissue Engineering Applications Research Articles

Recent Advances in Cellulose-Based Hydrogels for Tissue Engineering Applications

In recent years, cellulose has attracted much attention because of its excellent properties, such as its hydrophilicity, mechanical properties, biodegradability, biocompatibility, low cost and low toxicity. In addition, cellulose and its derivatives contain abundant hydrophilic functional groups (such as hydroxyl, carboxyl and aldehyde groups), which are good raw materials for synthesizing biocompatible hydrogels. In this paper, the application prospects of cellulose and its derivatives-based hydrogels in biomedical tissue engineering are summarized and discussed through the analysis of recent research. Firstly, we discuss the structure and properties of cellulose, nano celluloses (NC) from different sources (including cellulose nanocrystals (CNC), cellulose nanofibrils (CNF) and bacterial nano celluloses (BNC)) and cellulose derivatives (including cellulose ethers and cellulose esters) obtained by different modification methods. Then, the properties and preparation methods of physical and chemical cellulose hydrogels are described, respectively. The application of cellulose-based hydrogels as a tissue engineering scaffold (skin, bone and cartilage) in the biomedical field is introduced. Finally, the challenges and prospects of cellulose-based hydrogels in tissue engineering are summarized.

Three-dimensional tailor-made collagen-like proteins hydrogel for tissue engineering applications.

Despite the potential tunable properties of blank slate collagen-like proteins (CLP), an alternative to animal-originated collagen, assembling them into a stable 3D hydrogel to mimic extracellular matrix is a challenge. To address this constraint, the CLP (without hydroxyproline, CLPpro) and its variants encoding functional unnatural amino acids such as hydroxyproline (CLPhyp) and 3,4-dihydroxyphenylalanine (CLPdopa) were generated through genetic code engineering for 3D hydrogel development. The CLPhyp and CLPdopa were chosen to enhance the intermolecular hydrogen bond interaction through additional hydroxyl moiety and thereby facilitate the self-assembly into a fibrillar network of the hydrogel. Hydrogelation was induced through genipin as a cross-linker, enabling intermolecular cross-linking to form a hydrogel. Spectroscopic and rheological analyses confirmed that CLPpro and its variants maintained native triple-helical structure, which is necessary for its function, and viscoelastic nature of the hydrogels, respectively. Unlike CLPpro, the varients (CLPhyp and CLPdopa) increased pore size formation in the hydrogel scaffold, facilitating 3T3 fibroblast cell interactions. DSC analysis indicated that the stability of the hydrogels got increased upon the genetic incorporation of hydroxyproline (CLPhyp) and dopa (CLPdopa) in CLPpro. In addition, CLPdopa hydrogel was found to be relatively stable against collagenase enzyme compared to CLPpro and CLPhyp. It is the first report on 3D biocompatible hydrogel preparation by tailoring CLP sequence with non-natural amino acids. These next-generation tunable CLP hydrogels open a new venue to design synthetic protein-based biocompatible 3D biomaterials for tissue engineering applications.

Preparation and Characterization of Plasma-Derived Fibrin Hydrogels Modified by Alginate di-Aldehyde.

Fibrin hydrogels are one of the most popular scaffolds used in tissue engineering due to their excellent biological properties. Special attention should be paid to the use of human plasma-derived fibrin hydrogels as a 3D scaffold in the production of autologous skin grafts, skeletal muscle regeneration and bone tissue repair. However, mechanical weakness and rapid degradation, which causes plasma-derived fibrin matrices to shrink significantly, prompted us to improve their stability. In our study, plasma-derived fibrin was chemically bonded to oxidized alginate (alginate di-aldehyde, ADA) at 10%, 20%, 50% and 80% oxidation, by Schiff base formation, to produce natural hydrogels for tissue engineering applications. First, gelling time studies showed that the degree of ADA oxidation inhibits fibrin polymerization, which we associate with fiber increment and decreased fiber density; moreover, the storage modulus increased when increasing the final volume of CaCl2 (1% w/v) from 80 µL to 200 µL per milliliter of hydrogel. The contraction was similar in matrices with and without human primary fibroblasts (hFBs). In addition, proliferation studies with encapsulated hFBs showed an increment in cell viability in hydrogels with ADA at 10% oxidation at days 1 and 3 with 80 µL of CaCl2; by increasing this compound (CaCl2), the proliferation does not significantly increase until day 7. In the presence of 10% alginate oxidation, the proliferation results are similar to the control, in contrast to the sample with 20% oxidation whose proliferation decreases. Finally, the viability studies showed that the hFB morphology was maintained regardless of the degree of oxidation used; however, the quantity of CaCl2 influences the spread of the hFBs.

The Role of Aldehyde-Functionalized Crosslinkers on the Property of Chitosan Hydrogels.

Chitosan has been utilized as a popular biopolymer to fabricate hydrogels for biomedical applications. However, chitosan hydrogels are generally too brittle to mimic the deformability of the extracellular matrix in many tissues and organs. In particular, the role of the varied crosslinkers in determining the elasticity of chitosan hydrogels is lack of discussion. Here, three aldehyde-functionalized crosslinkers (i.e., aldehyde-modified poly(xylitol sebacate)-co-poly(ethylene glycol) (APP), glutaraldehyde (GA), and polydextran aldehyde (PDA)) are used to react with quaternized chitosan (QCS) through imine bonds to form hydrogels. The microstructures, mechanical performances, and cytocompatibility of the three hydrogels are systematically investigated. The APP/QCS hydrogels presented the best compressive and stretch properties among the three hydrogels. The mechanical property and antibacterial activity of APP/QCS hydrogels can be further modulated using varied QCS amounts, where more QCS contributed higher stiffness and stretchability as well as better bacterial inhibition to the APP/QCS hydrogels. Taken together, it is demonstrated that the inherent elastomeric characteristic of APP crosslinker provides the desirable elasticity and stretchability to QCS hydrogels compared to the other aldehyde-functionalized crosslinkers of GA and PDA. This strategy of using multivalent elastomeric crosslinkers to fabricate deformable chitosan hydrogels can expand the use of chitosan hydrogels in tissue engineering applications.

Gelatin Methacrylate Hydrogel for Tissue Engineering Applications-A Review on Material Modifications.

To recreate or substitute tissue in vivo is a complicated endeavor that requires biomaterials that can mimic the natural tissue environment. Gelatin methacrylate (GelMA) is created through covalent bonding of naturally derived polymer gelatin and methacrylic groups. Due to its biocompatibility, GelMA receives a lot of attention in the tissue engineering research field. Additionally, GelMA has versatile physical properties that allow a broad range of modifications to enhance the interaction between the material and the cells. In this review, we look at recent modifications of GelMA with naturally derived polymers, nanomaterials, and growth factors, focusing on recent developments for vascular tissue engineering and wound healing applications. Compared to polymers and nanoparticles, the modifications that embed growth factors show better mechanical properties and better cell migration, stimulating vascular development and a structure comparable to the natural-extracellular matrix.

Antimicrobial and Bioactive Silk Peptide Hybrid Hydrogel with a Heterogeneous Double Network Formed by Orthogonal Assembly.

Hydrogels mimic the natural extracellular matrix in terms of their nanofibrous structure and large water content. However, the lack of a combination of properties including sufficient heterogeneity in the gel structure, intrinsic antimicrobial activity, and bioactivity limits the efficiency of hydrogels for tissue engineering applications. In this work, a hydrogel with a combination of these properties was fabricated by hybridizing silk fibroin with a low-molecular-weight peptide gelator. It was observed that silk fibroin and the peptide gelator assembled orthogonally in sequence. While the morphology of silk fibroin nanofibrils was not affected by the peptide gelator, silk fibroin promoted the formation of wider nanoribbons of the peptide gelator by modulating its nucleation and growth. Orthogonal assembly maintained the antimicrobial activity of the peptide gelator and the excellent biocompatibility of silk fibroin in the hybrid gel. The hybrid gel also demonstrated improved interactions with cells, an indicator of a higher bioactivity, possibly due to the heterogeneous double network structure.

Multiscale Characterization of the Mechanical Properties of Fibrin and Polyethylene Glycol (PEG) Hydrogels for Tissue Engineering Applications

AbstractShear rheology and atomic force microscopy (AFM) are used to characterize the stiffness of hydrogels in tissue engineering applications, with several studies reporting differences of several orders of magnitude in the elastic moduli determined by these two methods. This work compares the elastic properties of soft fibrin and polyethylene glycol (PEG) hydrogels used for stem cell applications, determined by AFM indentation with different probe sizes (from nano‐ to micrometer) to shear rheometry data. For all hydrogels, AFM nanoscale probing consistently yields higher elastic modulus (E) values and variability than micrometer‐probe indentation, while the shear modulus (G) values determined are the lowest. Colloidal probe AFM results are closer to rheology data for the stiffest samples, where E/G ratios converge to the theoretical Trouton ratio of 3. The results suggest that high polymer concentration hydrogels are better described by the affine elastic network theory, whereas low polymer concentration hydrogels deviate significantly from the Trouton ratio. Thus, for soft hydrogels relevant for stem cell culture, the assumption E = 3G is often invalid and care should be taken when comparing data from studies where different characterization methods are used in order to discern the impact of material properties on cell behavior.

Polyvinyl Alcohol/Chitosan and Polyvinyl Alcohol/Ag@MOF Bilayer Hydrogel for Tissue Engineering Applications.

In this paper, polyvinyl alcohol/Ag-Metal-organic framework (PVA/Ag@MOF) and polyvinyl alcohol/chitosan (PVA/CS) were used as the inner and outer layers to successfully prepare a bilayer composite hydrogel for tissue engineering scaffold. The performance of bilayer hydrogels was evaluated. The outer layer (PVA/CS) has a uniform pore size distribution, good water retention, biocompatibility and cell adhesion ability. The inner layer (PVA/Ag@MOF) has good antibacterial activity and poor biocompatibility. PVA, PVA/0.1%Ag@MOF, PVA/0.5%Ag@MOF, and PVA/1.0%Ag@MOF show anti-microbial activity in ascending order. However, its use as an inner layer avoids direct contact with cells and prevents infection. The cell viability of all samples was above 90%, indicating that the bilayer hydrogel was non-toxic to A549 cells. The bilayer hydrogel scaffold combines the advantages of the inner and outer layers. In summary, this new bilayer composite is an ideal lung scaffold for tissue engineering.

Physical modification approaches to enhance cell supporting potential of poly (vinyl alcohol)‐based hydrogels

AbstractPVA‐based hydrogels with tissue engineered scaffolds application commonly need further modification to improve cell‐matrix interactions with respect to subsequent cell proliferation and differentiation. In this study, PVA‐modified hydrogels were formed by subjecting the solutions of PVA/Poly (R‐3‐hydroxybutyrate) (PHB), PVA/Extracellular Matrix (ECM), and PVA/PHB/ECM to freeze–thaw cycles and additive materials effect on cell supporting potential of the hydrogels was investigated. As, limited cell attachment and spreading were observed on PVA blended hydrogels, air plasma surface modification has been performed to promote cell attachment. Attenuated total reflection Fourier transform infrared (ATR‐FTIR) spectroscopy revealed the presence of some reactive bonds such as carbonyl on pure and amide on ECM‐coated PVA after plasma exposure. Atomic force microscopy (AFM) also proved increased roughness of hydrogel surface due to the plasma treatment. Plasma modification positive effect on cytoskeleton arrangement of cultured equine adipose derived stem cells (eASCs) was then confirmed by DAPI/phalloidin staining and scanning electron microscopy (SEM) imaging. In summary, among different physical modification approaches, coating with ECM fallowed by air plasma treatment had the most significant effect on cell‐hydrogel interactions. Thus, this combined modification method can be utilized to improve initial attachment and subsequent phenotype of cultured cells on PVA hydrogels for tissue engineering applications.

Investigation of human adipose-derived stem-cell behavior using a cell-instructive polydopamine-coated gelatin-alginate hydrogel.

Hydrogels can be fabricated and designed to exert direct control over stem cells' adhesion and differentiation. In this study, we have investigated the use of polydopamine (pDA)-treatment as a binding platform for bioactive compounds to create a versatile gelatin-alginate (Gel-Alg) hydrogel for tissue engineering applications. Precisely, pDA was used to modify the surface properties of the hydrogel and better control the adhesion and osteogenic differentiation of human adipose-derived stem cells (hASCs). pDA enabled the adsorption of different types of bioactive molecules, including a model osteoinductive drug (dexamethasone) as well as a model pro-angiogenic peptide (QK). The pDA treatment efficiently retained the drug and the peptide compared to the untreated hydrogel and proved to be effective in controlling the morphology, cell area, and osteogenic differentiation of hASCs. Overall, the findings of this study confirm the efficacy of pDA treatment as a valuable strategy to modulate the biological properties of biocompatible Gel-Alg hydrogels and further extend their value in regenerative medicine.

Hydrogels Based on Oxidized Cellulose Sulfates and Carboxymethyl Chitosan: Studies on Intrinsic Gel Properties, Stability, and Biocompatibility

Cellulose and chitosan are excellent components for the fabrication of bioactive scaffolds, as they are biocompatible and abundantly available. Their derivatives Ocarboxymethyl chitosan (CMChi) and oxidized cellulose sulfate (oxCS) can form in situ gelling, bioactive hydrogels, due to the formation of imine bonds for crosslinking. Here the influence of the degrees of sulfation (DS), oxidation (DO), and the molecular weight of oxCS on intrinsic and rheological properties of such hydrogels and their ability to support the survival and growth of human-adipose-derived stem cells (hADSC) is investigated. It is found that the pH of the hydrogels is generally slightly acidic, while their network density and E-modulus are found to be dependent on the DS and DO, which makes the properties of hydrogels tunable. Extensive studies show that hydrogels can be stable for up to 14 days and that their stability is largely dependent on the DO, molecular weight, and the components mixing ratio. Cytotoxicity studies of the hydrogel with hADSCs show biocompatible gels in dependence on the molecular weight and degree of oxidation with viable cells up to 14 days. These findings can help to develop specifically tailored hydrogels for tissue engineering applications to replace different types of connective tissue.

Oxygen-generating microparticles in chondrocytes-laden hydrogels by facile and versatile click chemistry strategy

Currently, oxygen supply for in vitro cell culture is one of the major challenges in tissue engineering, especially in three-dimensional (3D) structures, such as polymeric hydrogels, because oxygen is an essential element for cells survival. In this context, oxygen levels must be maintained in articular cartilage to promote the differentiation, viability, and proliferation of chondrocytes due to the low level of oxygen presence in this region. Although some technologies employ oxygen-generating materials to add sufficient oxygen levels, the limitations and challenges of current technologies include the lack of controlled, sustained, and prolonged release of the oxygen. Moreover, the fabrication methods may leave some impurities or residues resulting in toxicity to the cells. “Click” chemistry is a facile, versatile, and compatible chemical strategy to engineer hydrogels for tissue engineering applications. Herein, we disclose the engineering of oxygen-generating microparticles in chondrocytes-laden hydrogels through a versatile catalyst-free tetrazine and norbornene inverse electron demand Diels‒Alder (iEDDA) click reaction. The hydrogels combine chondroitin sulfate (CS) and poly(ethylene glycol) (PEG) crosslinked in situ, displaying tunable rheological and mechanical properties, for sustained and prolonged oxygen-release. Gene expression analysis of the chondrocytes by real-time reverse transcription polymerase chain reaction (RT-PCR) demonstrated promising cell response within the engineered hydrogel.

Nanohybrid-Reinforced Gelatin-Ureidopyrimidinone-Based Self-healing Injectable Hydrogels for Tissue Engineering Applications.

The traditional hydrogels are prone to break due to the applied stress. The deformation of the implanted hydrogels would result in the loss of structural integrity, leading to the failure of hydrogel functionalities and tissue regeneration. Self-healing hydrogels (AG-UPy), composed of oxidized alginate and ureidopyrimidinone-functionalized gelatin (G-UPy), were developed to address this challenge. These self-healing hydrogels possess two independent healing mechanisms, viz., Schiff base formation and UPy dimerization. These hydrogels were compared with oxidized alginate-gelatin (AG) hydrogels. AG-UPy hydrogels showed effective self-healing in a short time (about 2 min) after applying 800% strain, wherein recovery was not achieved with the AG hydrogel. However, the shear-thinning property of UPy made the AG-UPy hydrogel mechanically weaker than the AG hydrogel. To improve the mechanical strength of the AG-UPy hydrogel, we impregnated poly(ethylene glycol)-poly(urethane)/cloisite nanohybrid (PEG-PU/C) to prepare the AG-UPy/PEG-PU/C hydrogel. The incorporation of PEG-PU/C resulted in a 20-fold increase in the compression strength compared to that of the AG-UPy hydrogel. The AG-UPy/PEG-PU/C hydrogels also showed rapid self-healing. Incorporating the nanohybrid improved the cell proliferation by 2- and 1.25-fold compared to that of the AG and AG-UPy hydrogels, respectively. Therefore, PEG-PU/C combined with the UPy-functionalized polymer could be used to modulate mechanical strength and self-healing and enhance cell proliferation.

3D Patterning within Hydrogels for the Recreation of Functional Biological Environments

AbstractBiological structures are inherently complex in nature. Structural hierarchy, chemical anisotropy, and compositional heterogeneity are ubiquitous in biological systems and play a key role in the functionality of living systems. For decades, methods such as soft lithography have enabled recreation of such arrangements through precise spatial control of molecular patterns in 2D. With technological advances and increasing understanding of molecular and structural biology, there has been an increasing interest in recreating such spatial organizations in 3D. In this review, a comprehensive summary of the latest technologies being used to create 3D patterns of functional molecules within hydrogels for tissue engineering applications is presented. The review is divided into five groups of technologies defined according to the main driving force used to fabricate the patterns including light, precise chemical design, microfluidics, 3D printing, and non‐contact forces (i.e. electric, magnetic, or acoustic fields and self‐assembly).

3D bioprinting of dual-crosslinked nanocellulose hydrogels for tissue engineering applications.

Hydrogels based on cellulose nanofibrils (CNFs) have been widely used as scaffolds for biomedical applications, however, the poor mechanical properties of CNF hydrogels limit their use as ink for 3D bioprinting in order to generate scaffolds for tissue engineering applications. In this study, a dual crosslinkable hydrogel ink composed of a poly(ethylene glycol) (PEG) star polymer and 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO)-oxidized nanocellulose fibers (CNFs) is presented. As the resulting hydrogel had low structural integrity, at first crosslinking of CNFs was introduced by Ca2+. Strong physical interactions between CNFs and Ca2+ cations allowed easy regulation of the viscosity of the inks for extrusion printing raising the solution viscosity by more than 1.5 times depending on the amount of Ca2+ added. The resulting hydrogel had high structural integrity and was further stabilized in a second step by photo crosslinking of PEG under visible light. In only a few seconds, hydrogels with Young's modulus between ∼10 and 30 kPa were obtained just by altering the CNF and Ca2+ content. 3D printed hydrogels supported fibroblasts with excellent cell viability and proliferation. The dual crosslinkable hydrogel ink herein developed is versatile, easy to prepare, and suitable for 3D printing of bioscaffolds with highly tailored viscoelastic and mechanical properties applicable in a wide range of regenerative medicines.

Montmorillonite stabilized chitosan-co-mucin hydrogel for tissue engineering applications.

The role of polymers has played a crucial role in developing templates that can promote regeneration as tissue-engineered matrices. The present study aims to develop functional matrices involving the protein mucin. The mucin used in this study is characterised using MALDI-TOF TOF and CD spectroscopy prior to conjugation. Thereupon, a hybrid scaffold comprising of a polysaccharide, chitosan, chemically conjugated to a protein, mucin, and encapsulated with montmorillonite is developed. Grafting of hydroxyethyl methacrylate (HEMA) is done to overcome the issue of mechanical weakness that mucin hydrogels usually undergo. It was observed that the presence of montmorillonite led to the stability of the hydrogels. The conjugations with varied ratios of the polysaccharide and protein were characterized using spectroscopic techniques. The prepared gels showed appreciable material properties in terms of water uptake and porosity. Hydrogels with different ratios of the polysaccharide and protein were evaluated for their biocompatibility. The biological evaluation of the hydrogels was performed with MC3T3E1 and C2C12 cell lines indicating their potential for wider tissue engineering applications.

Biocompatible pectin-based hybrid hydrogels for tissue engineering applications

Hybrid hydrogels made of chemically modified pectin, gelatin and xanthan gum have been formulated and processed through a double crosslinking step, aimed at wound healing applications.

Natural-Based Hydrogels for Tissue Engineering Applications.

In the field of tissue engineering and regenerative medicine, hydrogels are used as biomaterials to support cell attachment and promote tissue regeneration due to their unique biomimetic characteristics. The use of natural-origin materials significantly influenced the origin and progress of the field due to their ability to mimic the native tissues’ extracellular matrix and biocompatibility. However, the majority of these natural materials failed to provide satisfactory cues to guide cell differentiation toward the formation of new tissues. In addition, the integration of technological advances, such as 3D printing, microfluidics and nanotechnology, in tissue engineering has obsoleted the first generation of natural-origin hydrogels. During the last decade, a new generation of hydrogels has emerged to meet the specific tissue necessities, to be used with state-of-the-art techniques and to capitalize the intrinsic characteristics of natural-based materials. In this review, we briefly examine important hydrogel crosslinking mechanisms. Then, the latest developments in engineering natural-based hydrogels are investigated and major applications in the field of tissue engineering and regenerative medicine are highlighted. Finally, the current limitations, future challenges and opportunities in this field are discussed to encourage realistic developments for the clinical translation of tissue engineering strategies.

Applications of Gelatin Methacryloyl (GelMA) Hydrogels in Microfluidic Technique-Assisted Tissue Engineering.

In recent years, the microfluidic technique has been widely used in the field of tissue engineering. Possessing the advantages of large-scale integration and flexible manipulation, microfluidic devices may serve as the production line of building blocks and the microenvironment simulator in tissue engineering. Additionally, in microfluidic technique-assisted tissue engineering, various biomaterials are desired to fabricate the tissue mimicking or repairing structures (i.e., particles, fibers, and scaffolds). Among the materials, gelatin methacrylate (GelMA)-based hydrogels have shown great potential due to their biocompatibility and mechanical tenability. In this work, applications of GelMA hydrogels in microfluidic technique-assisted tissue engineering are reviewed mainly from two viewpoints: Serving as raw materials for microfluidic fabrication of building blocks in tissue engineering and the simulation units in microfluidic chip-based microenvironment-mimicking devices. In addition, challenges and outlooks of the exploration of GelMA hydrogels in tissue engineering applications are proposed.

Polysaccharide-Based In Situ Self-Healing Hydrogels for Tissue Engineering Applications.

In situ hydrogels have attracted increasing interest in recent years due to the need to develop effective and practical implantable platforms. Traditional hydrogels require surgical interventions to be implanted and are far from providing personalized medicine applications. However, in situ hydrogels offer a wide variety of advantages, such as a non-invasive nature due to their localized action or the ability to perfectly adapt to the place to be replaced regardless the size, shape or irregularities. In recent years, research has particularly focused on in situ hydrogels based on natural polysaccharides due to their promising properties such as biocompatibility, biodegradability and their ability to self-repair. This last property inspired in nature gives them the possibility of maintaining their integrity even after damage, owing to specific physical interactions or dynamic covalent bonds that provide reversible linkages. In this review, the different self-healing mechanisms, as well as the latest research on in situ self-healing hydrogels, is presented, together with the potential applications of these materials in tissue regeneration.