Hydrogel Fibers Research Articles

Synthesis and characterization of natural fibers reinforced alginate hydrogel fibers loaded with diclofenac sodium for wound dressings

Hydrogels which become increasingly important in the biomedical field are composed of a three-dimensional hydrophilic network. Pure hydrogels are usually weak and brittle; therefore, reinforcements are assimilated into the hydrogel structure to improve the mechanical strength of the hydrogels. However, even if mechanical properties are enhanced, drapability remains an issue. In that regard, natural fiber-reinforced composite hydrogel fibers for wound dressing application are investigated in this study. Kapok and hemp fibers were used as reinforcement to improve the strength of hydrogel fibers. The properties of the prepared composite hydrogel fibers were studied with Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and differential scanning calorimeter (DSC). The effect of alginate concentration and fiber weight percent on the mechanical characteristics and water absorbency was studied. Diclofenac sodium drug was loaded in the hydrogel fibers and investigated the drug release as well as antibacterial characteristics. Both fibers' reinforcement enhanced the strength of the alginate hydrogel fiber, but hemp reinforcement showed better mechanical properties. Kapok reinforcement resulted in a maximum tensile strength of 174 cN (1.24 % elongation) and 432 % exudate absorbency, while hemp reinforcement resulted in 185 cN (1.48 % elongation) and 435 % exudate absorbency. Statistical analysis revealed significant effects of sodium alginate concentration on tensile strength (p-value 0.042) and exudate absorbency (p-value 0.020) and of reinforcement (wt%) on exudate absorbency (p-value 0.043). Therefore, these composite hydrogel fibers with improved mechanical properties are capable of drug release and exhibit antibacterial effectiveness, making them a promising option for use as wound dressings.

Dual-Function Hydrogel Dressings with a Dynamic Exchange of Iron Ions and an Antibiotic Drug for Treatment of Infected Wounds

Bacterial infection is a major problem with diabetic wounds that may result in nonhealing chronic ulcers. Here, we report an approach to antibacterial hydrogel dressings for enhanced treatment of infected skin wounds. A fibrous hydrogel was derived from cellulose nanocrystals that were modified with dopamine and cross-linked with gelatin. The hydrogel was loaded with gentamicin, an antibiotic drug. Enhanced antibacterial hydrogel performance resulted from (i) a highly specific sequestration of Fe3+ ions (much needed by bacteria) from the wound exudate and (ii) a dynamic exchange between gentamicin released from the hydrogel and Fe3+ ions withdrawn from the wound exudate. Such exchange was possible due to the high value of the binding constant of Fe3+ ions to dopamine. The hydrogel did not affect the metabolic activity of skin-related cells and showed enhanced antibacterial performance against common wound pathogens such as S. aureus and P. aeruginosa. Furthermore, it promoted healing of infected diabetic wounds due to a synergistic antibacterial effect providing the dynamic exchange between Fe3+ ions and gentamicin. This work provides a strategy for the design of dual-function wound dressings, with both starving and killing bacteria and enhanced wound healing performance.

Suspension bath bioprinting and maturation of anisotropic meniscal constructs

Due to limited intrinsic healing capacity of the meniscus, meniscal injuries pose a significant clinical challenge. The most common method for treatment of damaged meniscal tissues, meniscectomy, leads to improper loading within the knee joint, which can increase the risk of osteoarthritis. Thus, there is a clinical need for the development of constructs for meniscal repair that better replicate meniscal tissue organization to improve load distributions and function over time. Advanced three-dimensional bioprinting technologies such as suspension bath bioprinting provide some key advantages, such as the ability to support the fabrication of complex structures using non-viscous bioinks. In this work, the suspension bath printing process is utilized to print anisotropic constructs with a unique bioink that contains embedded hydrogel fibers that align via shear stresses during printing. Constructs with and without fibers are printed and then cultured for up to 56 d in vitro in a custom clamping system. Printed constructs with fibers demonstrate increased cell and collagen alignment, as well as enhanced tensile moduli when compared to constructs printed without fibers. This work advances the use of biofabrication to develop anisotropic constructs that can be utilized for the repair of meniscal tissue.

Study on the preparation of Interleukin 8 loaded hydrogel fiber and regulation on recruitment of stem cells

The high wastage rate and low survival rate of seed cells in conventional bone tissue engineering (BTE) are always a challenge for tissue regeneration. Constructing scaffolds that could continuously recruit endogenous stem cells is considered a novel way to promote tissue repair. In this study, a GelMA fiber hydrogel membrane loaded interleukin 8 (IL8) (IL8-GelMA), was prepared via electrostatic spinning technology. Compared with Gelatin fiber, GelMA fiber possessed a smooth morphology with nanoscale diameter and better physical properties including hydrophilicity, elastic modulus, swelling rate and degradation rate. In addition, IL8-GelMA fiber membranes could lead an osteogenic differentiation of BMSCs. Moreover, the results of chemotaxis experiment demonstrated that both IL8 and IL8-GelMA fiber membranes promote the migration of BMSCs in vitro. These results suggested that IL8-GelMA fiber membranes can be used for cell-free scaffold of bone repair, which can not only recruit endogenous BMSCs, but also promote osteogenic differentiation of BMSCs.

Synthetic fibrous hydrogels as a platform to decipher cell–matrix mechanical interactions

Cells continuously sense external forces from their microenvironment, the extracellular matrix (ECM). In turn, they generate contractile forces, which stiffen and remodel this matrix. Although this bidirectional mechanical exchange is crucial for many cell functions, it remains poorly understood. Key challenges are that the majority of available matrices for such studies, either natural or synthetic, are difficult to control or lack biological relevance. Here, we use a synthetic, yet highly biomimetic hydrogel based on polyisocyanide (PIC) polymers to investigate the effects of the fibrous architecture and the nonlinear mechanics on cell-matrix interactions. Live-cell rheology was combined with advanced microscopy-based approaches to understand the mechanisms behind cell-induced matrix stiffening and plastic remodeling. We demonstrate how cell-mediated fiber remodeling and the propagation of fiber displacements are modulated by adjusting the biological and mechanical properties of this material. Moreover, we validate the biological relevance of our results by demonstrating that cellular tractions in PIC gels develop analogously to those in the natural ECM. This study highlights the potential of PIC gels to disentangle complex bidirectional cell-matrix interactions and to improve the design of materials for mechanobiology studies.

A Novel Drastic Peptide Genetically Adapted to Biomimetic Scaffolds "Delivers" Osteogenic Signals to Human Mesenchymal Stem Cells.

This work describes the design, preparation, and deep investigation of "intelligent nanobiomaterials" that fulfill the safety rules and aim to serve as "signal deliverers" for osteogenesis, harboring a specific peptide that promotes and enhances osteogenesis at the end of their hydrogel fibers. The de novo synthesized protein fibers, besides their mechanical properties owed to their protein constituents from elastin, silk fibroin and mussel-foot adhesive protein-1 as well as to cell-attachment peptides from extracellular matrix glycoproteins, incorporate the Bone Morphogenetic Protein-2 (BMP2) peptide (AISMLYLDEN) that, according to our studies, serves as "signal deliverer" for osteogenesis. The osteogenetic capacity of the biomaterial has been evidenced by investigating the osteogenic marker genes ALP, RUNX2, Osteocalcin, COL1A1, BMPR1A, and BMPR2, which were increased drastically in cells cultured on scaffold-BMP2 for 21 days, even in the absence of osteogenesis medium. In addition, the induction of phosphorylation of intracellular Smad-1/5 and Erk-1/2 proteins clearly supported the osteogenetic capacity of the biomaterial.

Mineralization of Bone Extracellular Matrix-like Scaffolds Fabricated as Silk Sericin-Functionalized Dense Collagen-Fibrin Hybrid Hydrogels.

The design of hydrogels that combine both the biochemical cues needed to direct seeded cellular functions and mineralization to provide the structural and mechanical properties approaching those of mineralized native bone extracellular matrix (ECM) represents a significant challenge in bone tissue engineering. While fibrous hydrogels constituting of collagen or fibrin (and their hybrids) can be considered as scaffolds that mimic to some degree native bone ECM, their insufficient mechanical properties limit their application. In the present study, an automated gel aspiration-ejection (automated GAE) method was used to generate collagen-fibrin hybrid gel scaffolds with micro-architectures and mechanical properties approaching those of native bone ECM. Moreover, the functionalization of these hybrid scaffolds with negatively charged silk sericin accelerated their mineralization under acellular conditions in simulated body fluid and modulated the proliferation and osteoblastic differentiation of seeded MC3T3-E1 pre-osteoblastic cells. In the latter case, alkaline phosphatase activity measurements indicated that the hybrid gel scaffolds with seeded cells showed accelerated osteoblastic differentiation, which in turn led to increased matrix mineralization. In summary, the design of dense collagen-fibrin hybrid gels through an automated GAE process can provide a route to tailoring specific biochemical and mechanical properties to different types of bone ECM-like scaffolds, and can provide a model to better understand cell-matrix interactions in vitro for bioengineering purposes.

Aqueous spinning of robust, self-healable, and crack-resistant hydrogel microfibers enabled by hydrogen bond nanoconfinement

Robust damage-tolerant hydrogel fibers with high strength, crack resistance, and self-healing properties are indispensable for their long-term uses in soft machines and robots as load-bearing and actuating elements. However, current hydrogel fibers with inherent homogeneous structure are generally vulnerable to defects and cracks and thus local mechanical failure readily occurs across fiber normal. Here, inspired by spider spinning, we introduce a facile, energy-efficient aqueous pultrusion spinning process to continuously produce stiff yet extensible hydrogel microfibers at ambient conditions. The resulting microfibers are not only crack-insensitive but also rapidly heal the cracks in 30 s by moisture, owing to their structural nanoconfinement with hydrogen bond clusters embedded in an ionically complexed hygroscopic matrix. Moreover, the nanoconfined structure is highly energy-dissipating, moisture-sensitive but stable in water, leading to excellent damping and supercontraction properties. This work creates opportunities for the sustainable spinning of robust hydrogel-based fibrous materials towards diverse intelligent applications.

Chinese Tofu-Inspired Biomimetic Conductive and Transparent Fibers for Biomedical Applications.

Conductive fibers are vital for next-generation wearable and implantable electronics. However, the mismatch of mechanical, electrical, and biological properties between existing conductive fibers and human tissues significantly retards their further development. Here, the concept of neuro-like fibers to meet these aforementioned requirements is proposed. A new wet spinning process is established to continuously produce pure gelatin hydrogel fibers. The key is the controllable and rapid gelation of spinning solutions based on the salting-out effect, which is inspired by theChinese food tofu. The resultant fibers exhibit neuro-like features of soft-while-strong mechanical properties, high ionic conductivity, and superior biological properties including biodegradability, biocompatibility, and edibility, which are crucial for implanted applications but seldom reported. Furthermore, all-weather suitable neuro-like fibers with excellent anti-freezing and water retention properties are developed by introducing glycerol for wearable applications. The optical fiber, transient electronics, and electronic data glove made of neuro-like fibers profoundly demonstrate their potential in biomedical applications.

Fibrillogenesis and Hydrogel Formation from Fibrinogen Induced by Calcium Salts.

Fibrin is considered a highly promising biomaterial for manifold medical applications. Although it is a well-established material in this field, the required enzyme thrombin bears some striking downsides such as high costs and health risks. Current research discovers more and more ways to use fibrin's precursor fibrinogen as a substitute. Fibrinogen's full potential is, however, only retained when using it as fibrous gel, as it is the case for fibrin. In our previous work, we introduced such a kind of material for the first time. This material, called pseudo-fibrin, shows striking similarities to fibrin regarding its supramolecular structure and is created in a facile salt-induced process, which we further improved in this study. In particular, we shine light on the role of Ca2+ in pseudo-fibrin buildup, which turned out to drastically improve the outcome. Never before has it been observed that Ca2+ can induce fibrillogenesis and the gelation of native, enzyme-free fibrinogen. Enzyme catalysis was ruled out by the addition of thrombin and factor XIII inhibitors. Even more striking, Ca2+ induces gelation even under physiological conditions, leading again to stable and fibrous hydrogels. Although this latter approach is possibly co-induced by residual factor XIII, the resulting gels are for the first time recognized as promising materials and not discounted as unwanted side effects. The finding that these gels again consist of fibers especially renders a new perspective on the role of factor XIII and fibrinogen's well-known Ca2+ binding sites. In this study, we aim to provide first insights into this highly feasible material and its characteristics.

Platelet-rich plasma-loaded bioactive chitosan@sodium alginate@gelatin shell-core fibrous hydrogels with enhanced sustained release of growth factors for diabetic foot ulcer healing

The ability of autologous platelet-rich plasma (PRP) gel to promote rapid wound healing without immunological rejection has opened new avenues for the treatment of diabetic foot wounds. However, PRP gel still suffers from the quick release of growth factors (GFs) and requires frequent administration, thus resulting in decreased wound healing efficiency, higher cost as well as greater pain and suffering for the patients. In this study, the flow-assisted dynamic physical cross-linked coaxial microfluidic three-dimensional (3D) bio-printing technology, combined with the calcium ion chemical dual cross-linking method was developed to design PRP-loaded bioactive multi-layer shell-core fibrous hydrogels. The prepared hydrogels exhibited outstanding water absorption-retention capacity, good biocompatibility as well as a broad-spectrum antibacterial effect. Compared with clinical PRP gel, these bioactive fibrous hydrogels displayed a sustained release of GFs, reducing the administration frequency by 33 % availably during the wound treatment, but more prominent therapeutic effects such as effective reduced inflammation, in addition to promoting the growth of granulation tissue and angiogenesis, the formation of high-density hair follicles, and the generation of regular ordered and high-density collagen fiber network, which suggested great promise as exceptional candidates for treatment of diabetic foot ulcer in clinical settings.

Soft, strong, tough, and durable protein-based fiber hydrogels

Load-bearing soft tissues normally show J-shaped stress-strain behaviors with high compliance at low strains yet high strength at high strains. They have high water content but are still tough and durable. By contrast, naturally derived hydrogels are weak and brittle. Although hydrogels prepared from synthetic polymers can be strong and tough, they do not have the desired bioactivity for emerging biomedical applications. Here, we present a thermomechanical approach to replicate the combinational properties of soft tissues in protein-based photocrosslinkable hydrogels. As a demonstration, we create a gelatin methacryloyl fiber hydrogel with soft tissue-like mechanical properties, such as low Young's modulus (0.1 to 0.3 MPa), high strength (1.1 ± 0.2 MPa), high toughness (9,100 ± 2,200 J/m3), and high fatigue resistance (2,300 ± 500 J/m2). This hydrogel also resembles the biochemical and architectural properties of native extracellular matrix, which enables a fast formation of 3D interconnected cell meshwork inside hydrogels. The fiber architecture also regulates cellular mechanoresponse and supports cell remodeling inside hydrogels. The integration of tissue-like mechanical properties and bioactivity is highly desirable for the next-generation biomaterials and could advance emerging fields such as tissue engineering and regenerative medicine.

Temperature-Gated Light-Guiding Hydrogel Fiber for Thermoregulation During Optogenetic Neuromodulation

Temperature-Gated Light-Guiding Hydrogel Fiber for Thermoregulation During Optogenetic Neuromodulation

Recent Progress of Conductive Hydrogel Fibers for Flexible Electronics: Fabrications, Applications, and Perspectives

AbstractFlexible conductive materials with intrinsic structural characteristics are currently in the spotlight of both fundamental science and advanced technological applications due to their functional preponderances such as the remarkable conductivity, excellent mechanical properties, and tunable physical and chemical properties, and so on. Typically, conductive hydrogel fibers (CHFs) are promising candidates owing to their unique characteristics including light weight, high length‐to‐diameter ratio, high deformability, and so on. Herein, a comprehensive overview of the cutting‐edge advances the CHFs involving the architectural features, function characteristics, fabrication strategies, applications, and perspectives in flexible electronics are provided. The fundamental design principles and fabrication strategies are systematically introduced including the discontinuous fabrication (the capillary polymerization and the draw spinning) and the continuous fabrication (the wet spinning, the microfluidic spinning, 3D printing, and the electrospinning). In addition, their potential applications are crucially emphasized such as flexible energy harvesting devices, flexible energy storage devices, flexible smart sensors, and flexible biomedical electronics. This review concludes with a perspective on the challenges and opportunities of such attractive CHFs, allowing for better understanding of the fundamentals and the development of advanced conductive hydrogel materials.

Angiogenesis driven extracellular matrix remodeling of 3D bioprinted vascular networks

Angiogenesis plays a pivotal role in development and tissue growth, as well as in pathological conditions such as cancer. Being able to understand the basic mechanisms involved in the vascularization of tissues and angiogenic network formation provides a window to advance the development of in vitro tissue models and enhance tissue engineering applications. In this study, we leveraged a novel microfluidic-based three dimensional (3D) bioprinting technology and alginate-collagen type I (AGC) bioink, to develop a 3D bioprinting strategy to enable the biofabrication of complex angiogenic networks within the 3D structure. These networks were comprised of simian vacuolating virus 40 (SV40) transformed adult rat brain endothelial cell (SV-ARBEC)-laden hydrogel rings. With mechanical properties relevant for vascular tissue engineering applications, these bioprinted constructs formed spontaneous vascular networks, reminiscent of anisotropic tissue-like structures, while retaining high cellular viability. The vascular network formation was accompanied by extracellular matrix (ECM) remodeling, confirming sequential SV-ARBEC mediated collagen type I fiber deposition and reorganization. Treatment with broad spectrum matrix metalloproteinase (MMP) inhibitor supressed SV-ARBEC angiogenic sprouting, highlighting requirements of ECM remodeling in angiogenic network formation. This novel 3D microfluidic bioprinting technology and biocompatible AGC hydrogel fiber rings supported robust SV-ARBEC angiogenesis and corresponding ECM remodeling, allowing us to present a strategy suitable to advancing applications in vascular research and supporting the further development of disease models, novel testing beds for drug discovery and tissue engineering applications.

Biomimetic Design of 3D Fibrous Mesh Reinforced Hydrogel Replicating the Form and Function of the Intervertebral Disc

While cervical total artificial disc replacement potentially preserves motion of the natural intervertebral disc (IVD), problems also arise involving alterations of the spinal biomechanics. A major challenge lies in restoring mechanics of the natural IVD with appropriate kinematics and biomimetic configuration. A biomimetic artificial IVD model is designed and fabricated using a 3D braided fibrous scaffold and a self‐healable hydrogel matrix. The artificial IVD is characterized by 3D four‐directional fibrous structure resembling natural annulus fibrosus and self‐healable hydrogel‐mimicking natural nucleus pulposus. In the compression tests, the artificial IVD exhibits reasonable mechanical behaviors and desired viscoelastic behaviors similar to the natural IVD. After fatigue loading of 5 million cycles, the artificial IVDs become stiffer, whereas the mechanical values remain within the reasonable range. Finite‐element analysis of the artificial IVD from mesoscale and macroscale analysis indicates the coherent load transfer through both the interconnections within the fiber mesh and the fiber–matrix interface, and the entire IVD shows a stress profilometry similar to natural IVD. In conclusion, a biomimetic prototype of artificial IVD with nature‐mimicking mechanics and structure is fabricated. The presence of interwoven fibrous mesh, hydrogel confinement, and proper interfacial adhesion is all essential for scalable production of the IVD.

Naphthyl-Poly(S-((2-carboxyethyl)thio)-l-cysteine) Peptide Amphiphiles with Different Degrees of Polymerization: Synthesis, Self-Assembly, pH/Reduction-Triggered Drug Release, and Cytotoxicity.

Four peptide amphiphiles (PA1-4) with different degrees of polymerization (DP = 40, 15, 10, and 6) were synthesized by Fuchs-Farthing and ring-opening polymerization followed by post-polymerization modification, as fully characterized by 1H NMR, FT-IR, gel permeation chromatography, and circular dichroism (CD) spectroscopy. It was found that PAs could self-assemble to form regular spherical micelles in low-concentration (about 1 mg/mL) aqueous solution, which had different contents of secondary structures and mainly adopted random coil conformations. The water solubility of PAs increases with the increase of DP, the polypeptide chain stretches randomly in water, the β-sheets decrease, and the random coil conformations dominate. When the pH of PA solution decreases or increases, intramolecular hydrogen bonds break, and molecular chains stretch, leading to a decrease of α-helix, turn conformations, and an increase of β-sheets. Meanwhile, the particle size of micelles increases. At around 0.4 mg/mL, the hemolysis ability of PA2 is negligible at pH 7.4 and 6.5 and about 33% at pH 5.5. Cisplatin (CDDP) was linked to micelles by coordination bonds to explore their potential as drug carriers, exhibiting controlled pH and reduction in dual drug release effects. MTT assay showed that the HeLa cell viability was 78% when cultured in the 13.5 μg/mL PA2 blank micelles for 2 days, while the cell viability was 60% in the CDDP-loaded micelles. Furthermore, a high concentration of PA2 (about 100 mg/mL) could self-assemble into a fibrous hydrogel at pH 5.5, which self-healed 2 h after incision and self-degraded 71% within 14 days. The CDDP-loaded fiber hydrogel exhibited a sustained release effect similar to the CDDP-loaded micelles. The cytotoxicity of CDDP-loaded fibers at 48 h was detected to be the same as that of the same amount of CDDP, and the cell viability was 7%. Therefore, we provide a new strategy for the synthesis of amphiphilic peptides with potential applications in nano-drug carriers and cancer therapy.

Fabrication of Mechanically Enhanced, Suturable, Fibrous Hydrogel Membranes.

Poly(vinyl-alcohol) hydrogels have already been successfully utilised as drug carrier systems and tissue engineering scaffolds. However, lacking mechanical strength and suturability hinders any prospects for clinical and surgical applications. The objective of this work was to fabricate mechanically robust PVA membranes, which could also withstand surgical manipulation and suturing. Electrospun membranes and control hydrogels were produced with 61 kDa PVA. Using a high-speed rotating cylindrical collector, we achieved fibre alignment (fibre diameter: 300 ± 50 nm). Subsequently, we created multilayered samples with different orientations to achieve multidirectional reinforcement. Finally, utilising glutaraldehyde as a cross-linker, we created insoluble fibrous-hydrogel membranes. Mechanical studies were performed, confirming a fourfold increase in the specific loading capacities (from 0.21 to 0.84 Nm2/g) in the case of the monolayer samples. The multilayered membranes exhibited increased resistance from both horizontal and vertical directions, which varies according to the specific arrangement. Finally, the cross-linked fibrous hydrogel samples not only exhibited specific loading capacities significantly higher than their counterpart bulk hydrogels but successfully withstood suturing. Although cross-linking optimisation and animal experiments are required, these membranes have great prospects as alternatives to current surgical meshes, while the methodology could also be applied in other systems as well.

Nanofibrous polypeptide hydrogels with collagen-like structure as biomimetic extracellular matrix

Supramolecular peptides exhibit obvious similarities with collagen fibers in terms of self-assembly characteristics, nanofibrous structure, and responsiveness to external stimuli. Here, a series of supramolecular peptides were developed by altering the amino acid sequence, enabling the self-assembly of three types of 4-biphenylacetic acid (BPAA)-tripeptides into fibrous hydrogel through hydrogen bonding and π–π stacking under the influence of ion induction. Transmission electron and scanning electron microscopies revealed that the diameter of the fiber within nanofibrous hydrogels was ~ 10 and ~ 40 nm, respectively, which was similar with the self-assembled collagen fibers. For this reason, these hydrogels could be considered as a biomimetic extracellular substitute. Meanwhile, the gelation concentration induced by ions was even lower than 0.66 wt%, with an elastic modulus of ~ 0.27 kPa, corresponding to a water content of 99.34 wt%. In addition, the three supramolecular hydrogels were found to be good substrates for L929 cell adhesion and MC-3T3 cell proliferation. The overall results implied that BPAA-based hydrogels have a lucrative application potential as cell carriers.Graphical

Strong and tough fibrous hydrogels reinforced by multiscale hierarchical structures with multimechanisms.

Tough natural materials such as nacre, bone, and silk exhibit multiscale hierarchical structures where distinct toughening mechanisms occur at each level of the hierarchy, ranging from molecular uncoiling to microscale fibrillar sliding to macroscale crack deflection. An open question is whether and how the multiscale design motifs of natural materials can be translated to the development of next-generation biomimetic hydrogels. To address this challenge, we fabricate strong and tough hydrogel with architected multiscale hierarchical structures using a freeze-casting-assisted solution substitution strategy. The underlying multiscale multimechanisms are attributed to the gel's hierarchical structures, including microscale anisotropic honeycomb-structured fiber walls and matrix, with a modulus of 8.96 and 0.73MPa, respectively; hydrogen bond-enhanced fibers with nanocrystalline domains; and cross-linked strong polyvinyl alcohol chains with chain-connecting ionic bonds. This study establishes a blueprint of structure-performance mechanisms in tough hierarchically structured hydrogels and can inspire advanced design strategies for other promising hierarchical materials.