Hybrid System Research Articles

Morphology studies, optic proprieties, hirschfeld electrostatic potential mapping, docking molecular anti-inflammatory, and dynamic molecular approaches of hybrid phosphate

The above current study intends to identify new prospects for developing viable epilepsy treatments. To attain this purpose, the created P-carboxylammonium di-hydrogen monohydrate called (I). The research reveals the existence of both intermolecular (O–H⋯O) as well as N–H⋯O intramolecular hydrogen bonding in crystal packing patterns. As the fingerprint plots illustrate the different sorts of interactions and the hybrid system's relative abundance of each, However, the molecular docking results clearly demonstrate five typical hydrogen bonds, with the best binding posture of −4.757 kcal/mol for Lys244, Val272, Arg241, and Glu273 proteins when docked with (I) ligand. As a result, we may deduce that if the (I) ligand is a pharmaceutical used to treat epilepsy, it will probably be more potent than the conventional medication. As a result, (I) was simulated using molecular dynamics (MD) and is proposed as a viable therapeutic target for antiepileptic therapy. Reduced Density Gradient (RDG) analysis, highlighted the presence of significant non-covalent interactions (NCI) that contribute to the stability and structural integrity of the compound, emphasizing the importance of these interactions in the context of its potential applications, particularly in drug design and molecular interactions. Finally, the ELF and LOL analyses collectively enhance the understanding of the electronic structure of compound I, revealing critical information about electron distribution, localization, and the nature of interactions within the molecular framework. These insights are essential for predicting the compound's reactivity and potential applications in fields such as pharmaceuticals and materials science.

Enhanced photo-fermentative hydrogen production by constructing Rhodobacter capsulatus-ZnO/ZnS hybrid system

This study incorporated ZnO/ZnS nanoparticles with Rhodobacter capsulatus SB1003, forming a hybrid system to promote photo-fermentative hydrogen production. The results indicate that the material’s photocatalytic activity and concentration significantly affected hydrogen yield. The addition of ZnO/ZnS exhibited a more significant auxiliary effect than ZnO and achieved an approximately 30% increase in hydrogen production compared to the control group. ZnO/ZnS enhanced the production of extracellular polymers, thereby strengthening the synergy between the nanomaterials and the bacteria. The photogenerated electrons from ZnO/ZnS were utilized by the photosynthetic bacteria. Furthermore, the activity of nitrogenase was enhanced, resulting in improved hydrogen production performance. This study provides insights into hydrogen production by photosynthetic bacteria with the assistance of inorganic semiconductor nanomaterials.

Configuration and multistep switching of machines in dynamic hybrid MTS/MTO production systems

This study proposes the configuration of MTS-/MTO-dedicated and hybrid (switchable) machines under a multistep switching policy where each hybrid machine can be switched stepwise and compares it to the existing model with MTS-dedicated and hybrid machines under a group switching policy that makes all hybrid machines switch together. Since companies have been required to satisfy wide varieties of customers' needs in recent years, the dynamic hybrid make-to-stock (MTS) / make-to-order (MTO) production system–one of the flexible production strategies with superior efficiency and productivity–is widely adopted in the garment industry. This system contains MTS and MTO streams in a shared facility and holds dedicated and hybrid machines that can be switched between MTS and MTO production. The machine configuration and switching policy are essential factors to increase the effectiveness of this system; hence, the features of such components must be investigated. Numerical experiments demonstrate that the cost and the number of MTO customers waiting can be reduced by appropriately setting the multistep switching policy and the machine configuration. Effective operating rules can also be achieved using our proposed search heuristics. These results contribute to the improvement of the existing dynamic hybrid system and the expansion of its possible applications.

Hybrid system for nitric oxide and hydrogen production

The device for nitric oxide inhalation therapy TIANOX has been put into use in clinical practice. It produces NO in nonequilibrium plasma of a diffusive spark discharge in the air at atmospheric pressure. There is a tendency to use a therapeutic gas mixture with high NO concentration for inhalation in the developing medical treatment methods. Nitric oxide transition into active compounds such as nitric dioxide, peroxynitrite, and nitrotyrosine can lead to oxidative stress. The use of hydrogen as an antioxidant that decreases the levels of hydroxyl radicals and peroxynitrite can protect cells from oxidative damage. Positive effect of the nitric oxide mixture and hydrogen is shown in the experiments with animals.The aim of the article is to describe development and performance the first hybrid system producing nitric oxide and hydrogen that was created in Federal State Unitary Enterprise “Russian Federal Nuclear Center – All-Russian Research Institute of Experimental Physics”. The system is based on the plasmochemical generator Tianox and the hydrogen generator, which is based on the electrolyzer with a solid polymeric electrolyte. It is fitted with H2, NO, and NO2 monitor and provides a continuous monitoring of concentrations of these gases and helps ensure safety of medical procedures by disconnecting NO and H2 generators at the moment when the gas concentrations exceed maximum levels (H2max, NOmax, NO2max).Conclusion. This hybrid system for nitrogen and hydrogen production passed the first study in human successfully. The preclinical studies also demonstrated its efficacy and safety.

Design and Simulation of eVTOL Aircraft Thermal Management System

Abstract Vertical Take-off and Landing (VTOL) aircraft with hybrid or fully-electric propulsion systems are becoming popular for Urban Air Mobility (UAM) applications. However, they face challenges such as limited power and energy density, stringent operating temperature constraints, and the generation of low-grade waste heat. These issues emphasize the need for effective Thermal Management Systems (TMS) design. In light of the above, this paper aims to design the TMS for a parallel hybrid electric XV-15 aircraft, a widely known civil tiltrotor concept. The TMS is integrated into the aircraft system to assess its impact on energy efficiency and emissions at both aircraft and mission levels. This study considers current state of the art technology and expected advancements over the next two decades to identify the benefits of electrification. In the designed TMS, liquid cooling cold plates serve as the main heat acquisition and cooling system for each electric component. An air-coolant heat exchanger is also incorporated to dissipate the accumulated heat load. The study conducts a comparative analysis to determine the optimal TMS design point. It involves a comparison between two design scenarios: one focused on the cruise condition, which constitutes a significant portion of the flight mission, and another designed specifically for peak heat load conditions. This ensures a holistic evaluation of the TMS's performance across various flight phases, balancing efficiency and resilience to peak demands. Finally, the energy efficiency and emission penalty associated with the TMS integration are quantified and discussed in the study.

Numerical study of [formula omitted]-fuelled micro-free piston CHP system, coupled with thermophotovoltaic (TPV) and battolyser units

Hydrogen (H2) fuelled internal combustion engines (ICEs) can play an important role in small-scale applications despite low efficiency, short reactant residence time and pre-combustion issues. In this study, a hybrid green H2 production and utilisation system covering renewable-powered H2O electrolysis, micro-CHP (combined heat and power) and thermoelectric units was developed. The solar or wind powered battolyser system stores electricity and utilises it to produce H2. The produced green H2 combusts with air in the cylinder to drive the turbine and the electric generator. While the thermophotovoltaic (TPV) unit converts the heat radiation into electrical energy to maximise the power efficiency of the developed hybrid system. The result showed a better temperature distribution, higher pressure discharge on both pistons’ walls and increased energy efficiency by replacing a single-piston with the opposed piston cylinder combustor and using cylinder exit gas to generate more electricity. Steam coolant reduced the thermal stress on the cylinder wall. The mounted TPV unit on the cylinder wall converted the absorbed heat flux to 3.9 kW. The maximum power output of the solar PV and wind turbine systems was reached at an irradiance of 1200 W/m2 under ambient temperature conditions and a wind speed of 17 m/s. By using the exhaust gas from the cylinder to drive the gas turbine, 8.8 kW power output and an electrical efficiency of 31.9 % were recorded. NOx emissions <6 ppm and a CHP efficiency of 93.5 % were achieved for the developed hybrid system. The proposed system can substitute the current domestic gas boiler which is in the phase-out state.

Hybrid Energy Solutions for Sustainable Offshore Oil and Gas Operations: Leveraging Thermoelectric, Solar, and Wind Potential

The transition towards sustainable offshore oil and gas operations is increasingly important given the declining conventional energy reserves and growing environmental concerns. This research developed a concept design to enhance sustainability in offshore operations by integrating local solar and wind energy sources. The proposed hybrid system combines solar energy systems and wind turbines with traditional Thermoelectric Generators (TEGs), which have traditionally relied on natural gas. The study found that incorporating these renewable energy sources into the system significantly reduces carbon emissions, lowers dependency on fossil fuels, and improves overall operational efficiency. The main conclusion of this research is that integrating local renewable energy sources into offshore operations mitigates environmental impact, offers long-term cost savings, and enhances energy security. This framework provides practical solutions for the energy sector's transition towards greener, more resilient offshore operations.

An integrated hybrid wire-arc directed energy deposition, friction stir processing, and milling system for multi-track, multi-layer part manufacturing

Wire-based Directed Energy Deposition (DED) is a widely-used manufacturing method due to its high productivity and large part fabrication capability. Meanwhile, Friction Stir Processing (FSP) is a solid-state joining process that can modify microstructure and weld lightweight alloys. Additionally, wire-based DED printed parts need machining process to achieve the desired dimensional accuracy. To take advantage of all these three processes, this work proposes an integrated hybrid system by combining the wire-arc DED, FSP, and milling processes into a standalone system which can fabricate superior materials in a multi-track, multi-layer manner for the first time. The integrated system can improve dimensional accuracy and productivity by processing the workpiece without the need to move it between different systems. It is demonstrated that a 150 × 40 × 21 mm3 block of aluminum alloy AA5183 can be fabricated using the hybrid wire-DED/FSP/milling process from wire feedstock. Material characterization shows that the hybrid process is able to refine the grain size by two orders of magnitude to sub-micron scale, while eliminating all the pores and microcracks produced by the DED process. These enhancements result in significantly improved mechanical properties including Young's modulus (15 %), yield strength (161 %), ultimate strength (33 %), and hardness (55 %) without compromising ductility.

A Review of Geothermal Energy Coupled Hybrid System for Building Heat Supply

A Review of Geothermal Energy Coupled Hybrid System for Building Heat Supply

Versatile Nanolights From Silicon, Carbon and Oxygen Hybrid System for Optical Applications

AbstractSilicon, carbon and oxygen hybrid nanomaterials (i.e., SiCOHNs) have recently drawn extensive attention as versatile photoluminescence (PL) nanosystems. The collective advantages of silicon‐ and carbon‐based nanostructures have resulted in SiCOHNs with tunable and photostable PL properties, abundant possibilities for surface modification, and low biotoxicity. Although SiCOHNs have shown great potential in diverse applications, such as bioimaging, biosensing, drug delivery and information encryption, discovering novel SiCOHNs with explicit nanostructures and elucidating the fundamental mechanisms of their PL properties for bioapplications are highly desirable. In this review, on the preparation of SiCOHNs on the basis of the synthesis conditions and precursors are first focused. Next, the manipulation of the emission wavelength, quantum yield and RTP of SiCOHNs is discussed. On the basis of previous reports and the recent experimental/theoretical results, the primary structure of SiCOHNs is clarified and deduced their possible PL mechanism. SiCOHNs possess bacterial uptake efficiency and/or anticancer capacity, promoting various biomedical applications and proof‐of‐concept applications in anti‐counterfeiting. Finally, current challenges and future trends are summarized as a roadmap for the development of SiCOHNs‐based optical applications.

Breaking Surface-Plasmon Excitation Constraint via Surface Spin Waves.

Surface plasmons in two-dimensional (2D) electron systems have attracted great attention for their promising light-matter applications. However, the excitation of a surface plasmon, in particular, transverse-electric (TE) surface plasmon, remains an outstanding challenge due to the difficulty to conserve energy and momentum simultaneously in the normal 2D materials. Here we show that the TE surface plasmons ranging from gigahertz to terahertz regime can be effectively excited and manipulated in a hybrid dielectric, 2D material, and magnet structure. The essential physics is that the surface spin wave supplements an additional freedom of surface plasmon excitation and thus greatly enhances the electric field in the 2D medium. Based on widely used magnetic materials like yttrium iron garnet and manganese difluoride, we further show that the plasmon excitation manifests itself as a measurable dip in the reflection spectrum of the hybrid system while the dip position and the dip depth can be well controlled by an electric gating on the 2D layer and an external magnetic field. Our findings should bridge the fields of low-dimensional physics, plasmonics, and spintronics and open a novel route to integrate plasmonic and spintronic devices.

Long-Wavelength Afterglow Emission with Nearly 100% Efficiency through Space-Confined Energy Transfer in Organic-Carbon Dot Hybrid.

Long-wavelength afterglow emitters are crucial for optoelectronics and information security; however, it remains a challenge in achieving high luminescence efficiency due to the lack of effective modulation in electronic coupling and nonradiative transitions of singlet/triplet excitons. Here, we demonstrate an organic-carbon-dot (CD) hybrid system that operates via a space-confined energy transfer strategy to obtain bright afterglow emission centered at 600 nm with near-unity luminescence efficiency. Photophysical characterization and theoretical calculation confirm efficient luminescence can be assigned to the synergistic effect of intermolecular energy transfer from triplet excitons of CDs to singlets of subluminophores and the intense restraint in nonradiative decay losses of singlet/triplet-state excitons via rationally space-confined rigidification and amination modification. By utilizing precursor engineering, yellow and near-infrared afterglow centered at 575 and 680 nm with luminescence efficiencies of 94.4% and 45.9% has been obtained. Lastly, these highly emissive powders enable superior performance in lighting and information security.

ENERGY MANAGEMENT IN HYBRID PV-WIND-BATTERY STORAGE-BASED MICROGRID USING DROOP CONTROL TECHNIQUE

The paper presents an efficient energy management system designed for a small-scale hybrid microgrid incorporating wind, solar, and battery-based energy generation systems using the droop control technique. The heart of the proposed system is the energy management system, which is responsible for maintaining power balance within the microgrid. The EMS continuously monitors variations in renewable energy generation and load demand and adjusts the operation of the energy conversion systems and battery storage to ensure optimal performance and reliability. The primary objective of the energy management system is to maintain power balance within the microgrid, even in the face of fluctuations in renewable energy generation and load demand. This involves dynamically adjusting the operation of the renewable energy sources and battery storage system to match the instantaneous power requirements of the microgrid. Overall, the paper presents a comprehensive approach to designing and implementing an efficient energy management system for a small-scale hybrid wind-solar-battery-based microgrid to extract maximum profit from electricity generation. By integrating renewable energy sources with energy storage and advanced control algorithms, the proposed system aims to enhance the reliability, stability, and sustainability of the microgrid's power supply.

Understanding Solid Oxide Fuel Cell Hybridization: A Critical Review

A holistic literature review of 399 articles is presented on hybrid solid oxide fuel cell (SOFC) systems and taxonomized through a unique classification methodology that considers primary energy sources, component configurations, system outputs and relevant analysis. In the reviewed research articles, primarily four different types of technologies are used to complement the energy production of the fuel cell stack. As a result, four respective categories were established in terms of the coupling components, inclusive of (1) wind turbines (WTs), (2) solar systems (SS), (3) thermal power plant turbines (TPPTs) and (4) piston engines (PEs). Additional classification was needed to further subdivide the evaluated system configurations, due to the wide spectrum of system outputs encountered in the reviewed literature. That involved (a) electrical power generation (PG), (b) four types of cogeneration (CG), (c) four types of trigeneration (TG) and (d) two types of multigeneration (MG). Depending on the type of assessment in respective research, literature was further categorized as computational, experimental, or both computational and experimental. The most prevalent hybrid system amongst the 102 designs, as adapted from the reviewed literature, is the SOFC/gas turbine (GT) application, with the overwhelming majority producing exclusively electrical power output. The particular system is physically demonstrated in an existing 220-kW experimental facility established by the National Fuel Cell Research Center (NFCRC). The identified systems were predominantly computationally examined and research focused on operating conditions around specific design load ratings. Energy, exergy, economic, and environmental assessments were typically followed by sensitivity studies in the reviewed literature. The primary decision variables in most cases revolved around SOFC operating conditions, such as temperatures over 1000 °C as well as elevated pressures. Those resulted in the deterioration of the electrochemical cell and failed to be addressed by the majority of encountered studies. Improvements in the conversion efficiency of PG applications were enabled by natural gas (NG)-fed pressurized SOFCs, directly coupled to GTs. The most efficient power configuration in terms of thermodynamic performance was achieved by coupling PEs to SOFCs and a metal hydride reactor (MHR) to unlock a maximum net system efficiency of 79.54%. CG systems integrating solar cells (SCs) and photovoltaic panels (PVs) to SOFC subsystems can result in a combined efficiency of approximately 90% and sustain this over a broad energy demand range. TG systems incorporating gasifiers to SOFC/GT subsystems achieved a combined efficiency of 93%, whereas the optimal combined efficiency in MG configurations was identified at 79.5% by coupling SCs to the SOFC/GT/organic Rankine cycle turbine (ORCT) subsystems. In terms of cost-effectiveness, configurations that relied on increasing levels of renewable energy (RE) technologies resulted in high overall levelized cost of electricity (LCOE). This cost was increased further when power storage units were deployed to address wind and solar intermittency challenges. Configurations classified under TPPTs operating on low carbon-content fuels were preferred in terms of providing lower LCOE, while applications operating on gasified biomass and coal blends should deploy additional CO2 capture and storage units to mitigate respective emissions.

Co-optimization for day-ahead scheduling and flexibility response mode of a hydro–wind–solar hybrid system considering forecast uncertainty of variable renewable energy

Hydropower, characterized by its quick ramping speed and energy buffering capacity, has the ability to respond to the flexibility demand caused by the forecast uncertainty of variable renewable energy (VRE). However, how to determine the flexibility supply of each hydropower station to ensure the reliable execution of the day-ahead scheduling in the intraday operation is a challenging issue for a hydro–wind–solar hybrid system (HWSHS). Due to complex characteristics of cascade hydropower stations, there is a mutual influence between the day-ahead scheduling and its execution. Therefore, flexibility response mode (FRM) is proposed to determine the flexibility supply of each hydropower station according to the flexibility demand of VRE, and a co-optimization model is constructed to optimize the day-ahead scheduling and the parameters of FRM considering the forecast uncertainty of VRE. A HWSHS in Guizhou province, China, is employed as a case study. The results suggest that the FRM can ensure the reliable execution of the day-ahead scheduling in the intraday operation. Compared to a contrast model without FRM, the execution deviation and its duration are decreased by more than 22% and 37%, respectively, in both long-run and out-of-sample analyses.

Direct-bonded diamond membranes for heterogeneous quantum and electronic technologies

Diamond has superlative material properties for a broad range of quantum and electronic technologies. However, heteroepitaxial growth of single crystal diamond remains limited, impeding integration and evolution of diamond-based technologies. Here, we directly bond single-crystal diamond membranes to a wide variety of materials including silicon, fused silica, sapphire, thermal oxide, and lithium niobate. Our bonding process combines customized membrane synthesis, transfer, and dry surface functionalization, allowing for minimal contamination while providing pathways for near unity yield and scalability. We generate bonded crystalline membranes with thickness as low as 10 nm, sub-nm interfacial regions, and nanometer-scale thickness variability over 200 by 200 μm2 areas. We measure spin coherence times T2 for nitrogen vacancy centers in 150 nm-thick bonded membranes of up to 623 ± 21 μs, suitable for advanced quantum applications. We demonstrate multiple methods for integrating high quality factor nanophotonic cavities with the diamond heterostructures, highlighting the platform versatility in quantum photonic applications. Furthermore, we show that our ultra-thin diamond membranes are compatible with total internal reflection fluorescence (TIRF) microscopy, which enables interfacing coherent diamond quantum sensors with living cells while rejecting unwanted background luminescence. The processes demonstrated herein provide a full toolkit to synthesize heterogeneous diamond-based hybrid systems for quantum and electronic technologies.

Techno-environmental optimal sizing and dynamic behavior of a hybrid system feeding a large-scale SWRO desalination system: The case of Djerba Island, Tunisia

Techno-environmental optimal sizing and dynamic behavior of a hybrid system feeding a large-scale SWRO desalination system: The case of Djerba Island, Tunisia

Recyclability level and quantity decisions of electronic manufacturers under four recycling systems of extended producer responsibility

Some electronic manufacturers and groups have left or are planning to leave the default recycling system that regulates their responsibilities for end-of-life (EoL) products. A legislative menu in the extended producer responsibility (EPR) framework allows manufacturers to choose the rate or cost model freely. In this paper, we model four potential recycling systems to study how two firms with brand differentiation should choose legislative models. We analyze the effect of take-back rate and brand differentiation on the firms’ equilibrium decisions, identify the condition in which firms leave the default plan, and further compare economic and environmental outcomes among all recycling systems. We find that only the cost system creates free-riding avenues because the current cost allocation mechanism by market shares does not concern the environmental contributions of members. We also find that the hybrid system (which includes rate-cost and cost-rate systems) provides higher design incentives than the basic case (which includes rate and cost systems), contrasting to the conventional wisdom in which the rate system has superior design incentives. Finally, our results demonstrate that the rate-cost system performs better economic and environmental benefits due to the perfect match between differentiated manufacturers and legislative models.

Enhancing photocatalytic hydrogen production from engineered Escherichia coli-biohybrid system via intracellular electron redirection

The development of biotic-abiotic photosynthetic systems is becoming one of the most promising strategies towards the thirsty demand for sustainable energy production. However, considerable efforts are still required to further optimize the design and avoid the utilization of high-value substances while achieving highly efficient hydrogen production. Here we show a way to construct an Escherichia coli (E. coli)-quantum dots hybrid system by expressing ferredoxin (Fd), Fd-NAD(P)+ reductase (FNR), and [FeFe]-hydrogenase ([FeFe]H2ase) as a potential biocatalyst. We reveal that electrons originating from the quantum dots could be redirected through the newly established electron transport chain NADH/NAD+-FNR-Fd to [FeFe]H2ase, which contributes a key mechanism to boost the highest H2 production activity (3149.5 μmol gdcw−1h−1) by only using glycerol as the carbon source. Our work sheds light on the advantages of an intracellular biological hybrid system by combining the photocatalytic capacity with the optimized metabolic power to produce biofuels.

Hybrid bionic control system for prostheses: a review

The legs and hands are the most susceptible to loss and this is due to the fact that they are prominent external organs in the human body. With increasing disasters, accidents, wars and diseases the loss of limbs is increasing, making the individual restricted in freedom and movement and pursuing to find alternatives to improve the individual's life is extremely important. Modern bionic prostheses are the best alternatives to replace amputated ones to perform both aesthetic and functional tasks. On this basis and by analyzing the most common and used methods in prosthetics management as the electroencephalography (EEG), electromyography (EMG), and functional near- infrared spectroscopy (fNIRS) methods, knowing their advantages and disadvantages, comparing them and documenting their results from the outputs of literature and previous experimental studies, whether in individual use or hybrid use.In the light of these data, this article highlights the most common technologies and considers their superiority and insuperiority, which can be suitable for the formation of a hybrid bionic control system for prostheses or rehabilitation and restoration of lost functions. Based on the most important studies that have dealt with these technologies whereas individually or in their hybrid state. In addition, this article provides an encouraging outlook for those interested in scientific research to research, compare, identify and characterise superior hybrid systems related to exoskeletal control systems and in particular prostheses.