Hyaluronic Acid Chains Research Articles

Self-healing injectable hydrogels incorporating hyaluronic acid and phytic acid: Rheological insights and implications for regenerative medicine

Eying the increasing impact of hyaluronic acid (HA) and its multifaceted applications, this study employs a non-toxic, one-pot strategy to develop injectable, self-healing hydrogels for biomedical applications. Phytic acid (PA), a plant-derived organic acid with high biocompatibility and numerous hydroxyl groups, can act as a cross-linking agent to form hydrogen-bonded networks with the HA chains. The study examined the optimal mass ratio of HA to PA to achieve superior hydrogel performance. Fourier transform infrared spectroscopy, rheological studies, and thermal analysis confirmed the successful formation of the hydrogels, which exhibited injectability, rapid self-healing, malleability, and elasticity. The investigation of different compositions revealed a sensitive influence of PA on the self-assembly phenomena of HA during flow. SEM cross-section images of the freeze-dried gels revealed a porous surface in the form of an interconnected network of microchannels. In addition, the hydrogel exhibits good tissue adhesion properties and promotes cell proliferation in biocompatibility tests on human gingival fibroblasts. The significance of this study lies in the ability of the proposed materials to be injected, to conform to the complex 3D structure of host tissues as well as their ability to recover after damage, indicating significant potential as scaffolds for wound healing.

Effect of hyaluronic acid-based viscosupplementation on cartilage material properties

Viscosupplementation by intra-articular injections of hyaluronic acid (HA) is used to treat symptomatic osteoarthritis. Exogenous HA remains in the joint cavity for a short period of time (days) while claimed pain relief period lasts over months. There is a clear lack of understanding of viscosupplementation mechanism of action. Here, we hypothesize that HA penetrates the cartilage and contributes to the restoration of its mechanical quality.Confocal microscopy and bio-indentation were used to confirm HA penetration into cartilage and modulation of cartilage quality. Bio-indentation was performed on rat distal femurs incubated overnight in HA solutions, using phosphate buffered saline (PBS) as control. For this proof-of-concept evaluation, measurements of elastic modulus (MPa) and of maximal force (µN) were recorded before and immediately after exposure with HA, as well as after an additional washout with PBS. Cartilage thickness at the site of indentation was evaluated by contrast enhanced computed tomography with an ionic contrast agent. Indentation depths were located in the upper part of hyaline cartilage. Ostenil®, commercial product containing 1 % HA, induced a decrease in indentation depth in the range of forces influencing the whole cartilage thickness, together with an increase of the elastic modulus. Then, bio-indentation and size distribution of HA chains via SEC-SLS were assessed for a range of commercially available products. The results showed higher modulation of cartilage quality in the presence of 0.25–1 MDa HA chains.The present in vitro study suggests that HA modulates cartilage quality and might thus explain the long-term beneficial effect of viscosupplementation.

A Nucleobase‐Driven Self‐Gelled Hyaluronic Acid‐Based Injectable Adhesive Hydrogel Enhances Intervertebral Disc Repair

AbstractCell therapy strategies hold great promise for nucleus pulposus (NP) regeneration and intervertebral disc degeneration (IVDD) treatment. However, their therapeutic efficiency is compromised by the anoikis of administered cells and the harsh environment in degenerated intervertebral discs (IVD). Inspired by the ability of nucleobases to form multiple H‐bonds, a nucleobase‐driven self‐gelling strategy is proposed for the incorporation of nucleobases (e.g., thymine) into hyaluronic acid (HA) chains to trigger gel formation through enhanced intermolecular H‐bond interactions. An aqueous solution of a thymine‐modified HA (HAT) supramolecular polymer is shown to exhibit self‐gelation behavior, injectability, tissue adhesion, and hydration capacity (comparable to that observed in the NP tissue of a 25‐year‐old adult). These characteristics enable the injection and filling of the HAT hydrogel system in the IVD, integration of the separated NP tissues, restoration of the biomechanical functions of the degenerated IVD, and securing of the encapsulated cells in the NP site. Manganese dioxide (MnO2) nanoparticles incorporated into the HAT system (HATMn) regulate oxidative stress and the hypoxic microenvironment in degenerated IVD, ensuring the viability of the encapsulated cells. The 12‐week in vivo study results demonstrate that the administration of the MSCs‐laden HATMn system (HATMn‐MSCs) effectively restores the structure and function of degenerated IVD.

Comparison of Hyaluronidase-Mediated Degradation Kinetics of Commercially Available Hyaluronic Acid Fillers In Vitro.

The ability to degrade hyaluronic acid (HA)-based fillers with hyaluronidase allows for better management of adverse effects and reversal of suboptimal treatment outcomes. The aim of this study was to compare the enzymatic degradation kinetics of 16 commercially available HA-based fillers, representing 6 manufacturing technologies. In this nonclinical study, a recently developed in vitro multidose hyaluronidase administration protocol was used to induce degradation of HA-based fillers, enabling real-time evaluation of viscoelastic properties under near-static conditions. Each filler was exposed to repeated doses of hyaluronidase at intervals of 5 minutes to reach the degradation threshold of G' ≤ 30 Pa. Noticeable differences in degradation characteristics were observed based on the design and technology of different filler classes. Vycross fillers were the most difficult to degrade and the Cohesive Polydensified Matrix filler was the least difficult to degrade. Preserved Network Technology products demonstrated proportional increases in gel degradation time and enzyme volume required for degradation across the individual resilient hyaluronic acid (RHA) products and indication categories. No obvious relationship was observed between gel degradation characteristics and the individual parameters of HA concentration, HA chain length, or the degree of modification of each filler when analyzed separately; however, a general correlation was identified with certain physicochemical properties. Manufacturing technology was the most important factor influencing the reversibility of an HA product. An understanding of the differential degradation profiles of commercially available fillers will allow clinicians to select products that offer a higher margin of safety due to their preferential reversibility.

Hyaluronic Acid Unveiled: Exploring the Nanomechanics and Water Retention Properties at the Single-Molecule Level.

Hyaluronic acid (HA), a vital glycosaminoglycan in living organisms, possesses remarkable mechanical and viscoelastic properties that have garnered significant attention in therapeutic, biomedical, and cosmetic applications. However, a comprehensive picture of the physicochemical and biocharacterization of HA at the single-molecule level remains elusive. In this work, atomic force microscopy (AFM)-based single-molecule force spectroscopy (SMFS) and molecular dynamics (MD) simulation were used to investigate the nanomechanics and water retention properties of HA at the single-molecule level. The present study aims to unravel the intricate details of the influence of molecular structure on HA behavior and shed light on its unique attributes. According to the force measurements, the energy used to stretch a HA chain in water is 8.45 kJ/mol, significantly surpassing that of Curdlan (3.45 kJ/mol) and chitin (2.23 kJ/mol), both of which possess molecular structures partially similar to that of HA. Intriguingly, the strength of the intrachain interaction of HA (5.54 kJ/mol) was considerably weaker compared to Curdlan (11.06 kJ/mol) and chitin (or cellulose, 10.76 kJ/mol). This result indicates that HA exhibits a preference for interacting with water rather than with itself, thereby showing enhanced water affinity. Moreover, the force measurements demonstrated that changing the glycosidic bond from β-(1-3) (Curdlan) or β-(1-4) (chitin or cellulose) to β-(1-3) + β-(1-4) (HA) resulted in polysaccharides displaying improved water affinity and more extended conformation. These conclusions were further verified by molecular dynamics (MD) simulations. Overall, our work sheds new light on the nanomechanics and water retention properties of HA at the single-molecule level, offering valuable insights for future research in this field.

Dynamics of an aqueous suspension of short hyaluronic acid chains near a DPPC bilayer.

The synergy between hyaluronic acid (HA) and lipid molecules plays a crucial role in synovial fluids, cell coatings, etc. Diseased cells in cancer and arthritis show changes in HA concentration and chain size, impacting the viscoelastic and mechanical properties of the cells. Although the solution behavior of HA is known in experiments, a molecular-level understanding of the role of HA in the dynamics at the interface of HA-water and the cellular boundary is lacking. Here, we perform atomistic molecular dynamics simulation of short HA chains in an explicit water solvent in the presence of a DPPC bilayer, relevant in pathological cases. We identify a stable interface between HA-water and the bilayer where the water molecules are in contact with the bilayer and the HA chains are located away without any direct contact. Both translation and rotation of the interfacial waters in contact with the lipid bilayer and translation of the HA chains exhibit subdiffusive behavior. The diffusive behavior sets in slightly away from the bilayer, where the diffusion coefficients of water and HA decrease monotonically with increase in HA concentration. On the contrary, the dependence on HA chain size is only marginal due to enhanced chain flexibility as their size increases.

Micro-environment triple-responsive hyaluronic acid hydrogel dressings to promote antibacterial activity, collagen deposition, and angiogenesis for diabetic wound healing.

The clinical treatment of chronic diabetic wounds is a long-standing thorny issue. Strategies targeting the diabetic micro-environment have been developed to promote wound healing. However, it remains challenging to reverse the adverse conditions and re-activate tissue regeneration and angiogenesis. In this work, we develop injectable hydrogels that are responsive to acidic conditions, reactive oxygen species (ROS), and high glucose levels in a diabetic wound micro-environment to sustainably deliver tannic acid (TA) to augment antibacterial, anti-inflammatory, and anti-oxidative activities. This triple-responsive mechanism is designed by introducing dynamic acylhydrazone and phenylboronic ester bonds to crosslink modified hyaluronic acid (HA) chains. At a diabetic wound, the acylhydrazone bonds may be hydrolyzed at low pH. Meanwhile, glucose may compete with TA, and ROS may oxidize the C-B bond to release TA. Thus, sustained release of TA is triggered by the diabetic micro-environment. The released TA effectively scavenges ROS and kills bacteria. In vivo experiments on diabetic mice demonstrate that the hydrogel dressing highly promotes angiogenesis and extracellular matrix (ECM) deposition, leading to eventual full healing of diabetic skin wounds. This micro-environment-triggered triple-responsive drug release provides a promising method for chronic diabetic wound healing.

Uso de complejos híbridos estabilizados de ácido hialurónico en melasma. Serie de casos

Melasma is a hypermelanosis characterized by hyperpigmented brown spots that appear in photoexposed areas. Its multifactorial etiology involves genetic and hormonal factors, exposure to ultraviolet radiation, and vascular alterations. It occurs mainly in women, and its evolution is chronic. The diagnosis is clinical, and the treatment is generally combined, as no universal treatment exists. Hybrid hyaluronic acid complexes are formed by two hyaluronic acid chains (one high-molecular weight chain and another low-molecular one). They are currently used for aesthetic purposes, but their use in clinical dermatoses has already been documented. The objective of this article is to show the results of two Mexican patients with melasma who were administered intradermal stabilized hybrid complexes of hyaluronic acid with a protocol of two applications separated by four weeks between the first and second application. With the publication of this series of cases, we contribute to demonstrating the safety and effectiveness of using stabilized hyaluronic acid hybrid complexes for dermatoses with pigmentation disorders such as melasma.

Hyaluronan oligosaccharides form double-helical duplexes in water:1,4-dioxane mixed solvent

Hyaluronic acid (HA) is a hydrophilic natural polysaccharide consisting of alternating monosaccharide units of glucuronic acid and N-acetyl glucosamine. In aqueous solutions the electrostatic repulsion of the carboxylate groups hampers the formation of supermolecular structures that can be partially stabilized by the addition of salt. Increased permittivity of the mixed water:organic solvents causes better compensation of the negative charge of HA chains by dissolved cations which changes their interactions with other molecules. In this study we simulate interactions of two HA chains in water:1,4-dioxane and water:tert-butanol mixed solvents with varying NaCl concentrations using molecular dynamics (MD). Anti-parallel double-helix-like duplexes are formed in NaCl-containing water:1,4-dioxane mixture and remain stable even when NaCl is removed. Parallel duplexes separate after a short time. In water:tert-butanol analogous duplexes are unstable. Stability of HA duplexes is thus determined by the solvent composition and the ability of its components to separate in the solvation shell of HA molecules, as well as by the mutual orientation of the chains.

Size transformable organic nanotheranostic agents for NIR-II imaging-guided oncotherapy

Nanotheranostic agents combined the second near-infrared (NIR-II, 1000–1700 nm) fluorescence imaging with phototherapy strategy have attracted tremendous interest. However, the actual efficacy of NIR-II probes could be weakened by their limited accumulation and penetration in tumor tissues. Herein, a size-transformable NIR-II nanotheranostic agent (BBT-HASS@FPMPL NPs) is employed for simultaneously enhanced penetration and retention in deep tumor tissue to realize precise image and effective PTT therapy. BBT-HASS@FPMPL NPs were first formed by using hyaluronic acid (HA) chains and disulfide bonds as stimuli-responsive “lock” to efficiently load conjugated oligomer (BBTN+), and then folic acid (FA) modified polylysine (FPMPL) shell was stacked at the surface by electrostatic interaction. Dual targeting with HA and FA is expected to lead to more selective targeting and better accumulation of BBT-HASS@FPMPL NPs in tumor sites. Simultaneously, obvious particle size reduction and charge reversal can be triggered in acidic tumor microenvironment to achieve deep intratumor filtration through transcytosis. Following tumor penetration, size change was further initiated by overexpressed hyaluronidase and GSH in tumor. Free BBTN+ can be subsequently released from nanoparticles to promote specific intratumor retention, which synergistically enhance photothermal therapeutic efficacy. Owing to sufficient tumor accumulation and deep penetration, the NIR-II emission of BBTN+ could further be used for precise monitoring of subcutaneous tumor progression in mice for 6 days with just one dose injection. We expect that such nanotheranostic platform that combined the high resolution of NIR-II fluorescence with deep tumor penetration and long intratumor retention could be useful for real-time monitoring of tumor process, precise diagnosis, and enhanced phototherapy.

A multifunctional nanoaggregate‐based system for detection of rheumatoid arthritis via Optoacoustic/NIR‐II fluorescent imaging and therapy via inhibiting JAK‐STAT/NF‐κB/NLRP3 pathways

AbstractRheumatoid arthritis (RA) is a debilitating autoimmune disease that causes chronic pain and serious complications, presenting a significant challenge to treat. Promising approaches for treating RA involve signaling pathways modulation and targeted therapy. To this end, a multifunctional nanosystem, TPC‐U@HAT, has been designed for RA therapy, featuring multitargeting, dual‐stimuli response, and on‐demand drug release capabilities. TPC‐U@HAT is composed of a probe/prodrug TPC, a JAK1 kinase inhibitor upadacitinib, and the drug carrier HAT. TPC is composed of an aggregation‐induced emission (AIE)‐active NIR‐II chromophore TPY and an NF‐κB/NLRP3 inhibitor caffeic acid phenethyl ester (CAPE), connected via boronic ester bond which serves as the reactive‐oxygen‐species‐responsive linker. The carrier, HAT, is created by grafting bone‐targeting alendronate and hydrophobic tocopheryl succinate onto hyaluronic acid chains, which can encapsulate TPC and upadacitinib to form TPC‐U@HAT. Upon intravenous injection into mice, TPC‐U@HAT accumulates at inflamed lesions of RA through both active and passive targeting, and the overexpressed hyaluronidase and H2O2 therein cleave the hyaluronic acid polymer chains and boronate bonds, respectively. This generates an AIE‐active chromophore for detection and therapeutic evaluation of RA via both optoacoustic imaging and NIR‐II fluorescent imaging and concomitantly releases CAPE and upadacitinib to exert efficacious therapy by inhibiting NF‐κB/NLRP3 and JAK‐STAT pathways.

Injectable, pore-forming, self-healing, and adhesive hyaluronan hydrogels for soft tissue engineering applications

Most existing injectable hydrogels are non-porous, thereby lacking a microporous structure to promote cell ingrowth. Also, most hydrogels do not effectively adhere to the host tissue. The present study describes an injectable double network hydrogel formed by combining two hyaluronic acid (HA) derivatives, namely dopamine grafted HA (DAHA) and methacrylated HA (HAMA). These constituents instantly form a physically crosslinked network through Fe3+-dopamine coordination, and confer fast gelation, pore formation, and self-healing properties to the hydrogel. Photocroslinked upon UV exposure, HAMA forms a chemically crosslinked network, thereby improving mechanical and degradation properties. The adhesive properties of this hydrogel are attributed to the presence of dopamine groups, inspired by mussel creatures. Proper modification of HA chains was confirmed by NMR spectroscopy. The physical, mechanical, rheological, and biological properties of the new hydrogels were quantified in wet laboratory conditions. The results revealed that the DAHA/HAMA hydrogel rapidly forms a self-healing microporous adhesive scaffold with a 26.9 µm pore size, 29.4 kPa compressive modulus, and 12.8 kPa adhesion strength in under 6 s. These findings suggest that the new hydrogel is a promising candidate for in situ repair of soft tissues, particularly mechanically dynamic ones such as the vocal folds, cartilage, and dermis.

Dual-locking fluorescent nanoprobes for HAase-triggered carbon monoxide imaging in living cells

Fluorescent nanoprobes for carbon monoxide (CO) imaging emerged as an excellent tool for cancer diagnosis, but they are activated by single-biomarker. Herein, we developed a dual-locking fluorescent nanoprobe (HA-DMC) for HAase-triggered carbon monoxide imaging in the mitochondrion of the cancer cells. The fluorescent nanoprobes have “double locks” structures made of acetyl hyaluronic acid chains (hyaluronidase-triggered, first lock) as a barrier to form nanoparticles and the nitro group (CO-triggered, second lock) as intramolecular charge transfer (ICT) groups to quench the fluorescence of coumarin-pyridine derivative dyes. When the “locks” were only unlocked in sequence (from hyaluronidase to CO), a strong green fluorescence appeared for achieving cancer imaging. Meanwhile, the HA-DMC exhibited some satisfactory properties, such as mitochondria-targeting properties, excellent selectivity and sensitivity (24-fold), good water dispersibility, low detection limit (225 nM), and low cytotoxicity. Such features ensured that the HA-DMC could be successfully utilized for fluorescently imaging exogenous CO in the mitochondrion of living cells. In addition, the HA-DMC was successfully used to monitor exogenous and endogenous CO in vivo. We thus envision that HA-DMC is a promising platform for CO imaging in the mitochondrion of cancer cells and would promote the progress of fluorescent nanoprobes.

Hyaluronic acid single-network hydrogel with high stretchable and elastic properties

Stretchable materials have demonstrated great interest in wearable or implantable applications. Most of the existing hydrogels with high stretchability characteristics are based on double networks, exhibit large hysteresis loops, and cannot recover after deformation due to permanent rupture of network. Elastic, biodegradable, and biocompatible hydrogels are desirable for wound dressing of joints with frequent motions or post-surgical healing of mobile tissues. Here, we show a simple strategy for the preparation of a hyaluronic acid (HA) single-network hydrogel that can be stretchable and highly elastic without the addition of other components/partners or complicated processes of preparation. Our strategy relies on the use of high Mw HA to create a chemical hydrogel in which densely entangled HA chains are tied together by a small number of covalent bonds. While the presence of covalent cross-links can prevent disintegration of the HA network, entanglements endow the hydrogel with high stretchability through transmission of tension along the length of the long HA chains. The stretching-relaxation cycles show negligible hysteresis and perfect recovery of material after the release of force. The diminution of Mw together with increasing the concentration or cross-linker amount leads to brittle hydrogels.

Novel β1,4 N-acetylglucosaminyltransferase in de novo enzymatic synthesis of hyaluronic acid oligosaccharides.

The efficiency of de novo synthesis of hyaluronic acid (HA) using Pasteurella multocida hyaluronate synthase (PmHAS) is limited by its low catalytic activity during the initial reaction steps when monosaccharides are the acceptor substrates. In this study, we identified and characterized a β-1,4-N-acetylglucosaminyl-transferase (EcGnT) derived from the O-antigen gene synthesis cluster of Escherichia coli O8:K48:H9. Recombinant β1,4 EcGnT effectively catalyzed the production of HA disaccharides when the glucuronic acid monosaccharide derivative 4-nitrophenyl-β-D-glucuronide (GlcA-pNP) was used as the acceptor. Compared with PmHAS, β1,4 EcGnT exhibited superior N-acetylglucosamine transfer activity (~ 12-fold) with GlcA-pNP as the acceptor, making it a better option for the initial step of de novo HA oligosaccharide synthesis. We then developed a biocatalytic approach for size-controlled HA oligosaccharide synthesis using the disaccharide produced by β1,4 EcGnT as a starting material, followed by stepwise PmHAS-catalyzed synthesis of longer oligosaccharides. Using this approach, we produced a series of HA chains of up to 10 sugar monomers. Overall, our study identifies a novel bacterial β1,4 N-acetylglucosaminyltransferase and establishes a more efficient process for HA oligosaccharide synthesis that enables size-controlled production of HA oligosaccharides. KEY POINTS: • A novel β-1,4-N-acetylglucosaminyl-transferase (EcGnT) from E. coli O8:K48:H9. • EcGnT is superior to PmHAS for enabling de novo HA oligosaccharide synthesis. • Size-controlled HA oligosaccharide synthesis relay using EcGnT and PmHAS.

Long-term efficacy and safety of a hyaluronic acid dermal filler based on Tri-Hyal technology on restoration of midface volume.

Art Filler Volume (AFV) is a hyaluronic acid (HA)-based filler formulated with "Tri-Hyal" technology, a unique combination of three sizes of HA chains. This study assessed AFV efficacy and safety over 18 months when used to restore midface volume. During this open-label study, a maximum of 1.8 mL AFV was injected into each cheek area on Day 0 (D0). Subjects were evaluated at D21, when, if necessary, a retouch could be performed (maximum 1.2 mL per cheek). Subjects were evaluated at seven follow-up visits through to D540. The primary assessment was based on the evolution of the Medicis Midface Volume Scale (MMVS) grade on D21. Secondary outcomes were local and general adverse events, investigator- and subject-assessed Global Aesthetic Improvement Scale scores and changes in self-esteem. Of the 79 healthy Caucasians enrolled (mean age 54.8 years), 25 required a second injection. In the intention-to-treat population, mean overall MMVS scores improved significantly from D0 (3.2 ± 0.4) to D21 (1.8 ± 0.6) and D42 (1.7 ± 0.6) (all p < 0.0001). MMVS scores for each cheek also improved significantly, irrespective of retouch on D21: 22% of injections showed a persistent benefit at D540 without retouch. The most common adverse events were pain on palpation (19%), erythema (15%) and edema (13%); most were mild or moderate and resolved within 2 weeks. AFV produces a sustained objective and subjective midface volume restoration in female and male subjects, often without retouching, and was well tolerated.

Novel fluorescent nanoprobe based on hyaluronic acid and polyethyleneimine functionalized graphene oxide for detecting hyaluronidase as tumor marker

AbstractA novel nanoprobe was developed for the detection of hyaluronidase as cancer marker, using fluorescein 5‐isothiocyanate (FITC) as fluorescence indicator, hyaluronic acid (HA), and polyethyleneimine (PEI) functionalized graphene oxide (GO) as quencher. PEI was attached to GO through amide bonding, using 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide (EDC) and N‐hydroxysuccinimide (NHS) as coupling agents. Aminated hyaluronic acid (HA) was then linked to GO‐PEI (GOP) via the same route. Nuclear magnetic resonance, ultraviolet–visible–near infrared spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscope, and thermogravimetric analysis analyses confirmed the successful synthesis of GOP‐HA. Finally, FITC was attached to GOP‐HA through reaction between the isothiocyanate group of FITC and the amine group of aminated HA. The fluorescence of FITC is quenched in the resulted GOP‐HA‐FITC nanoprobe. Addition of hyaluronidase can cleave HA chains into small fragments, releasing FITC to emit fluorescence. Importantly, the nanoprobe is highly sensitive and selective, and can enter cells by specifically binding to the CD44 receptor on the surface of Hela cells. Therefore, GOP‐HA‐FITC nanoprobe could be used in targeted tumor cell imaging for the early diagnosis of cancers.

Moderate Constraint Facilitates Association and Force-Dependent Dissociation of HA-CD44 Complex.

Binding of cell surface glycoprotein CD44 to hyaluronic acid (HA) is a key event for mediating cell adhesion, motility, metastasis, inflammatory responses and tumor development, but the regulation mechanism and its molecular basis under diverse mechanical constraints remain unclear. We herein investigated interaction of CD44 HABD (HA binding site domain) to HA through free and steered molecular dynamics (MD) simulations as well as atomic force microscope (AFM) measurement using different constraints on HA. The middle, two ends or both of the constrained HA chains were fixed for MD simulations, while one and two biotin-avidin linkage or physical absorption were used to immobilize HA on substrates for AFM experiments, to model HA chains with low, moderate and high HA flexibilities, respectively. We found that binding of CD44 to moderate fixed HA was possessed of a better thermo-stability, a lower mechanical strength and a higher dissociation probability, while higher adhesive frequency, smaller rupture force and shorter lifetime were assigned to CD44 on the two biotin-immobilized HA rather than one biotin-immobilized or physically absorbed HA on substrates, suggesting a moderate HA flexibility requirement in favor of association and force-induced dissociation of CD44-HA complex. Tensile-induced convex conformation of HA chain was responsible for reduction of complex mechano-stability and did inversely a shrunken CD44 HABD under stretching; transition from catch bond to slip bond governed CD44-HA interaction. This study uncovered the regulation mechanism and its molecular basis for CD44-HA affinity under diverse mechano-microenvironments and provided a new insight into CD44-HA interaction-mediated cell inflammatory responses and tumor development.

Bioactive cell niche mediating uniform thermal stimulus for BMSC neural differentiation through TRPV1 channel activation.

As one of the physical stimulus tools to target neuromodulation-related biological entities, mild thermal stimulus has attracted increasing attention in unraveling neural differentiation processing. However, thermal stimulus for neural behavior regulation has been relatively unexplored due to the challenge in finding a good method of exerting thermal stimulus. Considering the distance-dependent temperature preservation efficiency and the native importance of a bioactive matrix, we herein put forward the design of a photothermal hydrogel by immobilizing photothermal dopamine (DA) in hyaluronic acid (HA) chains. Benefitting from the minuscule disaccharide repeat unit size (≈1 nm) of HA used for the DA grafting, and the additional adhesion capacity of the DA for recruiting cells, a uniformly close distance from heating source to cells is realized. Therefore, we successfully established a near-infrared light initiated photothermal stimulus platform, with full bioactivity and high thermal manipulation efficiency. After extensive characterization, we proved that the thermal activation, from matrix to cells, triggered TRPV1 ion channel opening and Ca2+ influx, which finally promoted neural differentiation of bone marrow mesenchymal stem cells (BMSCs). This work broadens the possibilities of polymeric photothermal materials, and is of great significance for remotely manipulating neural and other cellular machinery for stem cell therapeutics in tissue engineering.

Rheological Characterization and Theoretical Modeling Establish Molecular Design Rules for Tailored Dynamically Associating Polymers.

Dynamically associating polymers have long been of interest due to their highly tunable viscoelastic behavior. Many applications leverage this tunability to create materials that have specific rheological properties, but designing such materials is an arduous, iterative process. Current models for dynamically associating polymers are phenomenological, assuming a structure for the relationship between association kinetics and network relaxation. We present the Brachiation model, a molecular-level theory of a polymer network with dynamic associations that is rooted in experimentally controllable design parameters, replacing the iterative experimental process with a predictive model for how experimental modifications to the polymer will impact rheological behavior. We synthesize hyaluronic acid chains modified with supramolecular host–guest motifs to serve as a prototypical dynamic network exhibiting tunable physical properties through control of polymer concentration and association rates. We use dynamic light scattering microrheology to measure the linear viscoelasticity of these polymers across six decades in frequency and fit our theory parameters to the measured data. The parameters are then altered by a magnitude corresponding to changes made to the experimental parameters and used to obtain new rheological predictions that match the experimental results well, demonstrating the ability for this theory to inform the design process of dynamically associating polymeric materials.