Differentiation Of Human Mesenchymal Stem Cells Research Articles

Controlling differentiation of stem cells via bioactive disordered cues.

Ideal bone tissue engineering is to induce bone regeneration through the synergistic integration of biomaterial scaffolds, bone progenitor cells, and bone-forming factors. Biomimetic scaffolds imitate the native extracellular matrix (ECM) and are often utilized in vitro as analogues of the natural ECM to facilitate investigations of cell-ECM interactions and processes. In vivo, the cellular microenvironment has a crucial impact on regulating cell behavior and functions. A PET surface was activated and then functionalized with mimetic peptides to promote human mesenchymal stem cell (hMSC) adhesion and differentiation into an osteogenic lineage. Spray technology was used to randomly micropattern peptides (RGD and BMP-2 mimetic peptides) on the PET surface. The distribution of the peptides grafted on the surface, the roughness of the surfaces and the chemistry of the surfaces in each step of the treatment were ascertained by atomic force microscopy, fluorescence microscopy, time-of-flight secondary ion mass spectrometry, Toluidine Blue O assay, and X-ray photoelectron spectroscopy. Subsequently, cell lineage differentiation was evaluated by quantifying the expression of immunofluorescence markers: osteoblast markers (Runx-2, OPN) and osteocyte markers (E11, DMP1, and SOST). In this article, we hypothesized that a unique combination of bioactive micro/nanopatterns on a polymer surface improves the rate of morphology change and enhances hMSC differentiation. In DMEM, after 14 days, disordered micropatterned surfaces with RGD and BMP-2 led to a higher osteoblast marker expression than surfaces with a homogeneous dual peptide conjugation. Finally, hMSCs cultured in osteogenic differentiation medium (ODM) showed accelerated cell differentiation. In ODM, our results highlighted the expression of osteocyte markers when hMSCs were seeded on PET surfaces with random micropatterns.

Direct 3D printed biocompatible microfluidics: assessment of human mesenchymal stem cell differentiation and cytotoxic drug screening in a dynamic culture system

BackgroundIn vivo-mimicking conditions are critical in in vitro cell analysis to obtain clinically relevant results. The required conditions, comparable to those prevalent in nature, can be provided by microfluidic dynamic cell cultures. Microfluidics can be used to fabricate and test the functionality and biocompatibility of newly developed nanosystems or to apply micro- and nanoelectromechanical systems embedded in a microfluidic system. However, the use of microfluidic systems is often hampered by their accessibility, acquisition cost, or customization, especially for scientists whose primary research focus is not microfluidics.ResultsHere we present a method for 3D printing that can be applied without special prior knowledge and sophisticated equipment to produce various ready-to-use microfluidic components with a size of 100 µm. Compared to other available methods, 3D printing using fused deposition modeling (FDM) offers several advantages, such as time-reduction and avoidance of sophisticated equipment (e.g., photolithography), as well as excellent biocompatibility and avoidance of toxic, leaching chemicals or post-processing (e.g., stereolithography). We further demonstrate the ease of use of the method for two relevant applications: a cytotoxicity screening system and an osteoblastic differentiation assay. To our knowledge, this is the first time an application including treatment, long-term cell culture and analysis on one chip has been demonstrated in a directly 3D-printed microfluidic chip.ConclusionThe direct 3D printing method is tested and validated for various microfluidic components that can be combined on a chip depending on the specific requirements of the experiment. The ease of use and production opens up the potential of microfluidics to a wide range of users, especially in biomedical research. Our demonstration of its use as a cytotoxicity screening system and as an assay for osteoblastic differentiation shows the methods potential in the development of novel biomedical applications. With the presented method, we aim to disseminate microfluidics as a standard method in biomedical research, thus improving the reproducibility and transferability of results to clinical applications.Graphical

Enhanced osteogenic differentiation of human mesenchymal stem cells using size-controlled graphene oxide flakes

Recently, it has been revealed that the physical microenvironment can be translated into cellular mechanosensing to direct human mesenchymal stem cell (hMSC) differentiation. Graphene oxide (GO), a major derivative of graphene, has been regarded as a promising material for stem cell lineage specification due to its biocompatibility and unique physical properties to interact with stem cells. Especially, the lateral size of GO flakes is regarded as the key factor regulating cellular response caused by GO. In this work, GO that had been mechanically created and had an average diameter of 0.9, 1.1, and 1.7 m was produced using a ball-mill process. When size-controlled GO flakes were applied to hMSCs, osteogenic differentiation was enhanced by GO with a specific average diameter of 1.7 μm. It was confirmed that osteogenic differentiation was increased due to the enhanced expression of focal adhesion and the development of focal adhesion subordinate signals via extracellular signal-regulated kinase (ERK)-mitogen-activated protein kinase (MEK) pathway. These results suggest that size-controlled GO flakes could be efficient materials for promoting osteogenesis of hMSCs. Results of this study could also improve our understanding of the correlation between hMSCs and cellular responses to GO.

Phosphate promotes osteogenic differentiation through non-canonical Wnt signaling pathway in human mesenchymal stem cells.

Phosphate is indispensable in osteogenesis and mineralization. However, mechanisms by which phosphate enhances osteogenic differentiation are not fully understood. In this study, we studied the effect of phosphate on osteogenic differentiation as well as signaling pathways induced by phosphate in the process. Induced human bone marrow-derived mesenchymal stem cells differentiation into osteoblasts by the change of media containing β-glycerophosphate (GP), 1mM inorganic phosphate, or 3mM inorganic phosphate (Pi). The differentiation of osteoblasts was verified by the expression of osteoblast differentiation markers and calcium deposition. RNA sequencing was performed to assess transcriptome in the early stage of osteogenic differentiation. Osteogenic differentiation and mineralization were promoted in the 3mM Pi group compared to those in the GP and 1mM Pi groups on day 7 of culture. RNA sequencing revealed that the gene expressions involved in osteogenesis and the components in the Wnt signaling pathway was increased in 3mM Pi group compared with those in the GP on day 7. Analysis with qPCR and Western blot suggested upregulation of components in the non-canonical Wnt signaling pathway, including WNT5b and phosphorylated-c-Jun in the 3mM Pi group on day 7. WNT11 mRNA expression was increased in the 2 induction groups on day 7. Inhibition of WNT5b by siRNA experiment attenuated the components in non-canonical Wnt signaling expression, including WNT5b, WNT11 and ROR2 mRNA expression and phosphorylated-c-Jun protein expression. In addition, osteogenic differentiation and mineralization were partly decreased in 3mM Pi group on day 7 by the inhibition of WNT5b. Pi promoted osteogenic differentiation through the up-regulation of the non-canonical Wnt signaling pathway, including WNT5b, WNT11, p-c-Jun/c-Jun, in the early stage of differentiation. These findings provide a new perspective into the association of Pi and the non-canonical Wnt signaling pathway during osteogenic differentiation.

High resolution DLP stereolithography to fabricate biocompatible hydroxyapatite structures that support osteogenesis.

Lithography based additive manufacturing techniques, specifically digital light processing (DLP), are considered innovative manufacturing techniques for orthopaedic implants because of their potential for construction of complex geometries using polymers, metals, and ceramics. Hydroxyapatite (HA) coupons, printed using DLP, were evaluated for biological performance in supporting viability, proliferation, and osteogenic differentiation of the human cell line U2OS and human mesenchymal stem cells (MSCs) up to 35 days in culture to determine feasibility for future use in development of complex scaffold geometries. Contact angle, profilometry, and scanning electron microscopy (SEM) measurements showed the HA coupons to be hydrophilic, porous, and having micro size surface roughness, all within favourable cell culture ranges. The study found no impact of leachable and extractables form the DLP printing process. Cells seeded on coupons exhibited morphologies comparable to conventional tissue culture polystyrene plates. Cell proliferation rates, as determined by direct cell count and the RealTime-GloTM MT Cell Viability Assay, were similar on HA coupons and standard tissue culture polystyrene plates). Osteogenic differentiation of human MSCs on HA coupons was confirmed using alkaline phosphatase, Alizarin Red S and von Kossa staining. The morphology of MSCs cultured in osteogenic medium for 14 to 35 days was similar on HA coupons and tissue culture polystyrene plates, with osteogenic (geometric, cuboidal morphology with dark nodules) and adipogenic (lipid vesicles and deposits) features. We conclude that the DLP process and LithaBone HA400 slurry are biocompatible and are suitable for osteogenic applications. Coupons served as an effective evaluation design in the characterization and visualization of cell responses on DLP printed HA material. Results support the feasibility of future technical development for 3D printing of sophisticated scaffold designs, which can be constructed to meet the mechanical, chemical, and porosity requirements of an artificial bone scaffold.

MiR-106b enhances human mesenchymal stem cell differentiation to spermatogonial stem cells under germ cell profile genes involved in TGF-b signaling pathways.

Mesenchymal stem cells can be differentiated into tissue-specific cells. MicroRNAs (miRNAs) regulate the translation of mRNAs involved in the growth and development of a variety of cells, including primordial germ cells (PGCs). This study evaluated male germ cell differentiation from human MSCs by miR-106b. The MSCs were obtained from human adipose tissue. The differentiation of MSCs into PGCs was accomplished by transfection of a lentiviral vector expressing miR-106b. MSCs were treated with bone morphogenic factor 4 as a control and also as a putative inducer of PGC differentiation. PGC was differentiated into spermatogonial-like cells by retinoic acid. Moreover, Dazl, Plzf, Stra8, Gfra, and Thy1 gene expressions were investigated using real-time PCR. Our results showed that Dazl, Plzf, and Stra8 genes that were treated with BMP4 and miR-106b did not show any significant difference, meaning that miR-106b, like BMP4, is able to differentiate PGC cells from MSCs. In spermatogonial-like cells, Thy1 was significantly unregulated in both the miR-106b and BMP4 groups. Our findings showed that miR-106b regulates the differentiation of MSCs into PGCs. miR-106b influences on the expression of Dazl, Plzf, and Stra8 genes in PGC and Gfra, Stra8, and Thy1 genes.

The effect of AKT in extracellular matrix stiffness induced osteogenic differentiation of hBMSCs

Extracellular matrix (ECM) stiffness is an important biophysical factor in human bone marrow mesenchymal stem cells (hBMSCs) differentiation. Although there is evidence that Yes-associated protein (YAP) plays an important role in ECM elasticity induced osteogenesis, but the regulatory mechanism and signaling pathways have not been distinctly uncovered. In this study, hBMSCs were cultured on collagen-coated polydimethylsiloxane hydrogels with stiffness corresponding to Young's moduli of 0.5 kPa and 32 kPa, and gene chip analyses revealed the phosphoinositide 3-kinase (PI3K)-AKT pathway was highly correlated with ECM stiffness. Following western blots indicated that AKT phosphorylation was evidently affected in 5th–7th days after ECM stiffness stimulation, while PI3K showed little difference. The AKT activator SC79 and inhibitor MK2206 were utilized to modulate AKT phosphorylation. SC79 and MK2206 caused alteration in the mRNA expression and protein level of alkaline phosphatase (ALP), collagen type I alpha 1 (COL1A1) and runt related transcription factor 2 (RUNX2). On 32 kPa substrates, YAP enrichment in nucleus were significantly promoted by SC79 and remarkably decreased by MK2206. Besides, the ratio of YAP/p-YAP is upregulated by SC79 on both 32 kPa and 0.5 kPa substrates. In conclusion, these findings suggest that AKT is involved in the modulation of ECM stiffness induced osteogenesis, and AKT phosphorylation also influences the subcellular localization and activation of YAP.

Synthesis, Self-Assembly, and Cell Responses of Aromatic IKVAV Peptide Amphiphiles.

Synthetic bioactive aromatic peptide amphiphiles have been recognized as key elements of emerging biomedical strategies due to their biocompatibility, design flexibility, and functionality. Inspired by natural proteins, we synthesized two supramolecular materials of phenyl-capped Ile-Lys-Val-Ala-Val (Ben-IKVAV) and perfluorophenyl-capped Ile-Lys-Val-Ala-Val (PFB-IKVAV). We employed UV-vis absorption, fluorescence, circular dichroism, and Fourier-transform infrared spectroscopy to examine the driving force in the self-assembly of the newly discovered materials. It was found that both compounds exhibited ordered π-π interactions and secondary structures, especially PFB-IKVAV. The cytotoxicity of human mesenchymal stem cells (hMSCs) and cell differentiation studies was also performed. In addition, the immunofluorescent staining for neuronal-specific markers of MAP2 was 4.6 times (neural induction medium in the presence of PFB-IKVAV) that of the neural induction medium (control) on day 7. From analyzing the expression of neuronal-specific markers in hMSCs, it can be concluded that PFB-IKVAV may be a potential supramolecular biomaterial for biomedical applications.

Mineralizing Coating on 3D Printed Scaffolds for the Promotion of Osseointegration.

Design and fabrication of implants that can perform better than autologous bone grafts remain an unmet challenge for the hard tissue regeneration in craniomaxillofacial applications. Here, we report an integrated approach combining additive manufacturing with supramolecular chemistry to develop acellular mineralizing 3D printed scaffolds for hard tissue regeneration. Our approach relies on an elastin-like recombinamer (ELR) coating designed to trigger and guide the growth of ordered apatite on the surface of 3D printed nylon scaffolds. Three test samples including a) uncoated nylon scaffolds (referred to as “Uncoated”), b) ELR coated scaffolds (referred to as “ELR only”), and c) ELR coated and in vitro mineralized scaffolds (referred to as “Pre-mineralized”) were prepared and tested for in vitro and in vivo performance. All test samples supported normal human immortalized mesenchymal stem cell adhesion, growth, and differentiation with enhanced cell proliferation observed in the “Pre-mineralized” samples. Using a rabbit calvarial in vivo model, ‘Pre-mineralized’ scaffolds also exhibited higher bone ingrowth into scaffold pores and cavities with higher tissue-implant integration. However, the coated scaffolds (“ELR only” and “Pre-mineralized”) did not exhibit significantly more new bone formation compared to “Uncoated” scaffolds. Overall, the mineralizing coating offers an opportunity to enhance integration of 3D printed bone implants. However, there is a need to further decipher and tune their immunologic response to develop truly osteoinductive/conductive surfaces.

Foxf2 represses bone formation via Wnt2b/β-catenin signaling

Differentiation of mesenchymal stem cells (MSCs) into osteoblasts is a critical process for proper skeletal development and acquisition/maintenance of bone mass. However, since this regulatory mechanism has not yet been fully elucidated, the treatment of severe osteoporosis and fractures is a challenge. Here, through a comprehensive analysis of gene expression during the differentiation of MSCs into osteoblasts, we show that the forkhead transcription factor Foxf2 is a crucial regulator of this process. Foxf2 expression transiently increased during MSC osteoblastic differentiation. Overexpression of Foxf2 in MSCs inhibited osteoblastic differentiation, and conversely, knockdown of Foxf2 expression promoted this process. Osteoprogenitor-specific Foxf2 knockout mice developed a high bone mass phenotype due to increased bone formation. RNA-seq analysis and molecular experiments revealed that Foxf2 regulation of bone formation is mediated by Wnt2b. Knockdown of Foxf2 in mouse femurs enhanced bone regeneration in vivo. FOXF2 expression was correlated with hip bone mineral density in postmenopausal women with low bone mass. Finally, inhibition of FOXF2 promoted osteoblastic differentiation of human MSCs. This study uncovers a critical role of Foxf2 in the differentiation of MSCs into osteoblasts and provides insight into the pathogenesis associated with bone-related diseases such as osteoporosis and nonunion after fracture.

Polarization of Femtosecond Laser for Titanium Alloy Nanopatterning Influences Osteoblastic Differentiation.

Ultrashort pulse lasers have significant advantages over conventional continuous wave and long pulse lasers for the texturing of metallic surfaces, especially for nanoscale surface structure patterning. Furthermore, ultrafast laser beam polarization allows for the precise control of the spatial alignment of nanotextures imprinted on titanium-based implant surfaces. In this article, we report the biological effect of beam polarization on human mesenchymal stem cell differentiation. We created, on polished titanium-6aluminum-4vanadium (Ti-6Al-4V) plates, a laser-induced periodic surface structure (LIPSS) using linear or azimuthal polarization of infrared beams to generate linear or radial LIPSS, respectively. The main difference between the two surfaces was the microstructural anisotropy of the linear LIPSS and the isotropy of the radial LIPSS. At 7 d post seeding, cells on the radial LIPSS surface showed the highest extracellular fibronectin production. At 14 days, qRT-PCR showed on the same surface an increase in osteogenesis-related genes, such as alkaline phosphatase and osterix. At 21 d, mineralization clusters indicative of final osteoinduction were more abundant on the radial LIPSS. Taken together, we identified that creating more isotropic than linear surfaces enhances cell differentiation, resulting in an improved osseointegration. Thus, the fine tuning of ultrashort pulse lasers may be a promising new route for the functionalization of medical implants.

Dissociation of nanosilicates induces downstream endochondral differentiation gene expression program.

Bioactive materials harness the body’s innate regenerative potential by directing endogenous progenitor cells to facilitate tissue repair. Dissolution products of inorganic biomaterials provide unique biomolecular signaling for tissue-specific differentiation. Inorganic ions (minerals) are vital to biological processes and play crucial roles in regulating gene expression patterns and directing cellular fate. However, mechanisms by which ionic dissolution products affect cellular differentiation are not well characterized. We demonstrate the role of the inorganic biomaterial synthetic two-dimensional nanosilicates and its ionic dissolution products on human mesenchymal stem cell differentiation. We use whole-transcriptome sequencing (RNA-sequencing) to characterize the contribution of nanosilicates and its ionic dissolution products on endochondral differentiation. Our study highlights the modulatory role of ions in stem cell transcriptome dynamics by regulating lineage-specific gene expression patterns. This work paves the way for leveraging biochemical characteristics of inorganic biomaterials to direct cellular processes and promote in situ tissue regeneration.

The Active Compound Thymoquinone Alters Chondrogenic Differentiation of Human Mesenchymal Stem Cells via Modulation of Intracellular Signaling.

Objective:The regenerative potential of mesenchymal stem cell (MSC)-like cells in the cartilage is relatively low because of the lack of innervation and vascularization. The increase in proinflammatory cytokines in cartilage damage can increase the expression of apoptotic and proinflammatory genes and the matrix degradation enzymes via nuclear factor-κB (NF-κB). Previous evidence suggested that thymoquinone (TQ) suppresses tumor necrosis factor-α-mediated NF-κB activation in different cancer cell lines. The suppression of the NF-κB pathway increases chondrogenic differentiation by inhibiting osteogenic differentiation in MSCs. Therefore, the current descriptive study aimed at highlighting the role of thymoquinone on the differentiation of human MSCs (hMSCs) since it is predicted that agents with known anti-inflammatory properties such as TQ have the potential to alter the chondrogenic differentiation of MSCs.Methods:In this study, the bioactive component thymoquinone, with its well-documented effects on the NF-κB signaling pathway, was used in hMSC differentiation assays. The effects of thymoquinone on hMSC differentiation and the relevant intracellular signaling pathways were determined using immunocytochemistry and western blotting for the first time. Changes in the phosphorylation status of some signaling components involved in NF-κB and mTOR signaling were also evaluated.Results:The chondrogenic differentiation potential of hMSCs treated with TQ decreased, concomitant with the decrease in the activity of NF-κB signaling pathway components. Thymoquinone triggered the suppression of NF-κB signaling, which interfered with the chondrogenic potential of hMSC, as opposed to some previous findings in the literature.Conclusions:The results of this study are of great importance for the optimization of directed differentiation of hMSCs and hMSC-mediated cellular therapies.

Neural Differentiation of Human Dental Mesenchymal Stem Cells Induced by ATRA and UDP-4: A Comparative Study.

Human mesenchymal stem cells (MSC) are multipotent stem cells, which are isolated from various sources. Currently, there is a worldwide interest for dental MSC to be used against neurodegenerative diseases, since they derive from the neural crest and express embryonic stem cell markers. This fact prompted us to explore their potential for neural trans-differentiation in culture. We employed all-trans-retinoic acid (ATRA) and 2-(3-ethylureido)-6-methylpyridine (UDP-4) to induce neural differentiation of human MSC from the dental apical papilla (SCAP). The SCAP were exposed to either agent separately and assessed for proliferation, viability, morphology, and gene expression of the following neural-specific markers: neuron-specific enolase (ENO2), neurofibromin 1 (NF1), choline acetyltransferase (CHAT), tyrosine hydroxylase (TH), and the vesicular GABA transporter (SLC32A1). They were also assessed for the expression of glial fibrillary acidic protein (GFAP) and neuronal nuclear antigen (NeuN) by immunofluorescence. ATRA or UDP-4 treatment inhibited the cell growth and promoted limited cell death, but to a different extent. The addition of the neuroprotective agent recombinant human erythropoietin-alpha (rhEPO-α) enhanced the UDP-4-inducing capacity for more than three weeks. ATRA or UDP-4 treatment significantly upregulated ENO2 and NF1 expression, indicating neuronal differentiation. Moreover, the ATRA treatment significantly induced the upregulation of the GABAergic-specific SLC32A1, while the UDP-4 treatment led to the significant upregulation of the adrenergic-specific TH. The UDP-4 treatment induced the expression of NeuN and GFAP after four and three weeks, respectively, while the ATRA-treatment did not. Our findings indicate that SCAP can be differentiated into neural-like cells after treatment with ATRA or UDP-4 by exhibiting a disparate pattern of differentiation. Therefore, UDP-4 is suggested here as a new potent neural-differentiation-inducing compound, which, when combined with rhEPO-α, could lay the foundation for robust stem-cell-based therapies of neurodegeneration.

Neuronal differentiation of mesenchymal stem cells by polyvinyl alcohol/Gelatin/crocin and beta-carotene.

Nerve tissues are important in coordinating the motions and movements of the body. Nerve tissue repair and regeneration is a slow process that might take a long time and cost a lot of money. As a result, tissue engineering was employed to treat nerve tissue lesions. The aim of this study was to investigate the proliferation of C6 cells and human mesenchymal stem cells derived bone marrow (hBMMSCs) differentiate into neuronal-like cells on the polyvinyl alcohol/gelatin/crocin (PVA/Gel/Cro) nanofiber scaffolds in vitro. PVA/Gel scaffolds containing crocin in three concentrations (1%, 3%, and 5%) were prepared by the electrospinning method. The human bone marrow-derived mesenchymal stem cells (hBMSCs) differentiation on the PVA/Gel/Cro 5% that induced by beta-carotene (βC), was analyzed during 10days. Morphology of differentiated cells on the scaffolds was taken by scanning electron microscope (SEM). The expression of the neural cell markers was studied by quantitative reverse transcription- polymerase chain reaction (qRT-PCR) and immunocytochemistry (ICC). MTT results of C6 cells culture on the scaffolds showed that proliferation and metabolic activity on PVA/Gel scaffold containing crocin 5% (PVA/Gel/Cro 5%) are significantly more than the other concentrations (P = 0.01). MSC differentiation to nerve-like cells was approved by MAP-2 expression at the mRNA level and NESTIN and MAP-2 at the protein level. These results suggested that PVA/Gel/Cro 5% and βC could lead to hBMSCs differentiation to neural cells.

Osteogenic Differentiation of Human Mesenchymal Stem Cells Modulated by Surface Manganese Chemistry in SLA Titanium Implants.

The manganese (Mn) ion has recently been probed as a potential candidate element for the surface chemistry modification of titanium (Ti) implants in order to develop a more osteogenic surface with the expectation of taking advantage of its strong binding affinity to the integrins on bone-forming cells. However, the exact mechanism of how Mn enhances osteogenesis when introduced into the surface of Ti implants is not clearly understood. This study investigated the corrosion resistance and potential osteogenic capacity of a Mn-incorporated Ti surface as determined by electrochemical measurement and examining the behaviors of human mesenchymal stem cells (MSCs) in a clinically available sandblasted/acid-etched (SLA) oral implant surface intended for future biomedical applications. The surface that resulted from wet chemical treatment exhibited the formation of a Mn-containing nanostructured TiO2 anatase thin film in the SLA implant and improved corrosion resistance. The Mn-incorporated SLA surface displayed sustained Mn ion release and enhanced osteogenesis-related MSC function, which enhanced early cellular events such as spreading, focal adhesion, and mRNA expression of critical adhesion-related genes and promoted full human MSC differentiation into mature osteoblasts. Our findings indicate that surface Mn modification by wet chemical treatment is an effective approach to produce a Ti implant surface with increased osteogenic capacity through the promotion of the osteogenic differentiation of MSCs. The improved corrosion resistance of the resultant surface is yet another important benefit of being able to provide favorable osseointegration interface stability with an increased barrier effect.

Small extracellular vesicles with nanomorphology memory promote osteogenesis.

Nanotopographical cues endow biomaterials the ability to guide cell adhesion, proliferation, and differentiation. Cellular mechanical memory can maintain the cell status by retaining cellular information obtained from past mechanical microenvironments. Here, we propose a new concept “morphology memory of small extracellular vesicles (sEV)” for bone regeneration. We performed nanotopography on titanium plates through alkali and heat (Ti8) treatment to promote human mesenchymal stem cell (hMSC) differentiation. Next, we extracted the sEVs from the hMSC, which were cultured on the nanotopographical Ti plates for 21 days (Ti8-21-sEV). We demonstrated that Ti8-21-sEV had superior pro-osteogenesis ability in vitro and in vivo. RNA sequencing further confirmed that Ti8-21-sEV promote bone regeneration through osteogenic-related pathways, including the PI3K-AKT signaling pathway, MAPK signaling pathway, focal adhesion, and extracellular matrix-receptor interaction. Finally, we decorated the Ti8-21-sEV on a 3D printed porous polyetheretherketone scaffold. The femoral condyle defect model of rabbits was used to demonstrate that Ti8-21-sEV had the best bone ingrowth. In summary, our study demonstrated that the Ti8-21-sEV have memory function by copying the pro-osteogenesis information from the nanotopography. We expect that our study will encourage the discovery of other sEV with morphology memory for tissue regeneration.

Induction of Human Umbilical Mesenchymal Stem Cell Differentiation Into Retinal Pigment Epithelial Cells Using a Transwell-Based Co-culture System

There is an increasing interest in generating retinal pigment epithelial (RPE) cells from stem cells for treating degenerative eye diseases. However, whether human umbilical cord mesenchymal stem cells (HUCMSCs) can differentiate into RPE-like cells in a co-culture system has not been fully understood. In this study, induction of HUCMSC differentiation into RPE-like cells was performed by co-culturing HUCMSCs and a human RPE-like cell line (ARPE19) in a transwell system and then analyzed for biomarkers using quantitative reverse transcription polymerase chain reaction (RT-PCR) and immunofluorescence staining technique. Moreover, the functional characterization of induced cells was carried out by examining their phagocytic and neurotrophic factor–secreting activities. Our results showed that mRNA expressions of RPE-specific markers—MITF, OTX2, RPE65, PEDF, PME17, and CRALBP—and protein markers—RPE65, CRALBP, and ZO-1—were significantly increased in HUCMSC-derived RPE-like cells. Functional characteristic studies showed that these induced cells were capable of engulfing photoreceptor outer segments and secreting brain-derived neurotrophic factor (BDNF) and glial-derived neurotrophic factor (GDNF), which are typical functions of RPE-like cells. Overall, the study findings indicate that the morphology and proliferation of HUCMSCs can be maintained in a serum-free medium, and differentiation into RPE-like cells can be induced by simply co-culturing HUCMSCs with ARPE19 cells. Thus, the study provides fundamental information regarding the clinical-scale generation of RPE-like cells from HUCMSCs.

MTHFR C677T mutation affects adipogenic differentiation abilities of human bone marrow-derived mesenchymal stem cells.

The effects of 5,10-Methylenetetrahydrofolate reductase (MTHFR) C677T polymorphism on human bone marrow-derived mesenchymal stem cells (hBM-MSCs) viability, morphology, physiology and differentiation capacity were investigated in this study. For this purpose, primary hBM-MSCs with wild type (WT, C/C), heterozygote (HTZ, C/T) and homozygote (HMZ, T/T) for the MTHFR gene were obtained with ethical committee permission and donor informed. Mutations were detected using RFLP and Sanger sequencing methods from genomic DNA isolated from cells, colonization properties were investigated by CFU-F test and proliferative differences were investigated by MTT test. Adipogenic, osteogenic, and chondrogenic differentiation were induced to study changes in their differentiation potentials, and the results were statistically analyzed using one-way ANOVA with Graphpad Prism. A total of 13 donors were screened and there were no differences in the hBM-MSC markers and in vitro morphologies of the cells. While there were significant differences between WT and HTZ as a result of the CFU-F test, there were no significant differences in the MTT test after 24 and 48 h. As a result of differentiation tests, it was found that adipogenic differentiation was significantly more in HMZ cells than WT cells. Osteogenic and chondrogenic differentiation results did not give statistically significant results. As a result of these experiments, adipogenic differentiation was found to be affected by the MTHFR genotype in hBM-MSCs.

Dual-Functional Nano-Functionalized Titanium Scaffolds to Inhibit Bacterial Growth and Enhance Osteointegration.

Implantable biomaterials play a key role for the success of orthopedic surgery procedures. However, infections remain one of the most damaging post-operative complications that lead to the implant failure. Recently, several approaches have been proposed to avoid or manage implant-associated infections. Among these, an appropriate surface functionalization to confer intrinsic antibacterial properties preserving the osteo-integration ability represents an appealing strategy for the development of innovative implant materials. Titanium and its alloys are the most used materials for manufacturing of both articular and bone skull prostheses as well as dental implants. However, to date there is still a significant clinical need to improve their bioactivity, osseointegration and antibacterial activity. In this study, titanium biomimetic scaffolds are prepared by nano-functionalization with TiO2 (Ti_TiO2) and γFe2O3 (Ti_γFe2O3). Both cytocompatibility and antibacterial activity have been evaluated. Data show that both nano-functionalized scaffolds exhibit a good antibacterial activity towards Staphylococcus aureus, reducing colony number to 99.4% (Ti_TiO2) and 99.9% (Ti_γFe2O3), respectively. In addition, an increase of both human adipose-derived mesenchymal stem cells (hADSCs) cell proliferation (up to 4.3-fold for Ti_TiO2 and 3.7-fold for Ti_γFe2O3) and differentiation has been observed. These data suggest that these nano-functionalized titanium substrates represent promising prototypes for new antimicrobial and osteoconductive biomaterials to be used in the orthopedic field to reconstruct significant bone defect.