HOTTIP Research Articles

Improving placement learning at scale: a case study evaluation

PurposeIn this study, the authors explore students' and industry’s perceptions about the challenges and opportunities of participating in a large-scale, non-compulsory, individual, in-person and unpaid business placement programme at an Australian university. The placement programme aims to support students' workplace transition by emphasising the development of key employability skills through reflective learning and linking theory to practice.Design/methodology/approachUtilising a case study methodology and integrating survey questionnaires, the authors collected both quantitative and qualitative data with large sample sizes.FindingsThe results highlight curriculum areas for improvement, emphasising tailored feedback to manage placement expectations and addressing employability skill strengths and weaknesses.Practical implicationsRecommendations include co-partnering with students to develop short, tailored and hot tip videos along with online learning modules, including the presentation of evidence-based statistics to inform students about post-programme employment prospects.Originality/valueThe study contributes to benchmarking good practices in non-compulsory, individual, in-person and unpaid placement pedagogy within the business education context.

Non-destructive evaluation of aging in welded pipeline X60 and X65 by thermoelectric power means

In this investigation, the sensibility of the thermoelectric power (TEP) to the aging condition of API X60 and API X65 steel pipeline welded joints was evaluated. Specimens of both API welded joints were artificially aged at 300 °C for 3, 7, 9, 18, 30 and 45 h, the microstructural evolution was assessed via optical microscopy (OM) and scanning electron microscopy (SEM). Image analysis revealed no significant changes in the microstructure with respect to the aging time. Vickers micro-hardness evaluation showed that both welded joints reach a maximum hardness value after 3 h of artificial aging followed by a reduction in its value in the next aging conditions. TEP was measured using the hot tip technique applying different hot tip temperatures (55, 60, 65, 70 °C), where higher temperature values showed to increase the sensibility of the technique to detect microstructural changes that affect micro-hardness and where not possible to observe via OM and SEM. TEP and micro-hardness exhibit an opposite correlation, which was confirmed calculating the Pearson's correlation coefficient (r). The correlation coefficient decreases when higher hot tip temperatures where employed to measure TEP. The good correlation between TEP values and micro-hardness allows to use TEP measurement as a prediction tool of material micro-hardness.

Thermal Scanning-Probe Lithography for Broad-Band On-Demand Plasmonic Nanostructures on Transparent Substrates.

Thermal scanning-probe lithography (t-SPL) is a high-resolution nanolithography technique that enables the nanopatterning of thermosensitive materials by means of a heated silicon tip. It does not require alignment markers and gives the possibility to assess the morphology of the sample in a noninvasive way before, during, and after the patterning. In order to exploit t-SPL at its peak performances, the writing process requires applying an electric bias between the scanning hot tip and the sample, thereby restricting its application to conductive, optically opaque, substrates. In this work, we show a t-SPL-based method, enabling the noninvasive high-resolution nanolithography of photonic nanostructures onto optically transparent substrates across a broad-band visible and near-infrared spectral range. This was possible by intercalating an ultrathin transparent conductive oxide film between the dielectric substrate and the sacrificial patterning layer. This way, nanolithography performances comparable with those typically observed on conventional semiconductor substrates are achieved without significant changes of the optical response of the final sample. We validated this innovative nanolithography approach by engineering periodic arrays of plasmonic nanoantennas and showing the capability to tune their plasmonic response over a broad-band visible and near-infrared spectral range. The optical properties of the obtained systems make them promising candidates for the fabrication of hybrid plasmonic metasurfaces supported onto fragile low-dimensional materials, thus enabling a variety of applications in nanophotonics, sensing, and thermoplasmonics.

Estimation of the segregation in a high carbon cast steel by thermoelectric power means

This research study proposes the hot-cold tip thermoelectric power (TEP) method to estimate alloying elements segregation and the microstructure variation of high carbon steel cast in a mold. Optical Emission Spectrometry (OES) showed a higher concentration of carbon, nickel, chromium and aluminum at the ingot center. That elemental saturation produced an increase in perlite content as well as hardness. The non-destructive technique of thermoelectric power was applied varying the hot tip temperature (40 oC, 50 oC, 60 oC, 70 oC), where higher temperature values showed to be more sensitive to segregation and microstructural changes. The statistical analysis showed that the thermoelectric power technique is more sensitive to detect the nickel and chromium concentration changes.

Augmented cooling performance in gas turbine blade tip with slot cooling

The blade tip is one of the most susceptible parts of gas turbine blade due to the thermally induced failure caused by a hot gas tip leakage flow through tip clearance. A highly sophisticated and efficient blade tip cooling scheme plays a crucial role in reliable operation of a gas turbine blade. In the present study, we adopted a special slot cooling scheme in turbine blade tip. The film cooling effectiveness (FCE) and flow characteristics of turbine blade tip were investigated according to the cooling flow through the slot gap in blade tip rim. A linear cascade was fabricated to measure and evaluate the cooling performance of the blade tip with the film cooling through a slotted rim versus the blade tip with cooling holes. The local FCE values of the blade tip floor and rim upper surface were measured using the pressure-sensitive paint (PSP) method. The Reynolds number based on the axial chord length and the inlet velocity in the experiment was set at 192,000. The tip clearance was varied from 1 to 3% of the blade span and the coolant mass flow rate ranged from 0.3 to 0.7% of the main flow. The slot cooling in the blade tip, which can be incorporated through an additive manufacturing, showed highly enhanced cooling performance ranging from 53 to 116% compared to that of the blade tip with film cooling holes for various tip gaps and coolant mass flow rates. The slot cooling in the blade tip is expected to improve the thermal durability and reliability of blade tip with better coolant coverage and additional convective cooling through the internal cooling passage in the narrow squealer rim.

Effectiveness of four topical treatment methods in a rat model of superficial partial-thickness burn injury: the advantages of combining zinc-hyaluronan gel with silver foam dressing

BackgroundThere are several options available for conservative treatment of partial-thickness burns, however, reliable, affordable, and easily obtainable animal testing models are hard to find for the comparison of the different treatment methods. We aimed at developing a preclinical testing model and at comparing four treatment methods for superficial partial-thickness burns. MethodsBurn injury was induced in 90 adult male Wistar rats by placing the 130°C hot tip of a commercially obtainable soldering device for 30 s on the clipped skin of the interscapular region at a steady pressure. Skin histology was studied on days 5, 10, and 22 after the induction of the burn injury, on which days, respectively, the ratio of the not epithelialized wound (%), the extent of re-epithelialization (score), and the scar thickness (µm) were assessed. We compared 4 groups: silver-sulfadiazine cream, zinc-hyaluronan gel, silver foam dressing, and the combination of zinc-hyaluronan gel with a silver foam dressing. ResultsOn day 5, the induction of superficial partial-thickness burn injury was confirmed histologically in the rats. The zinc-hyaluronan gel and the combination treatment resulted in a markedly smaller ratio of the non-epithelialized area (29 ± 10% and 28 ± 13%, respectively) than silver-sulfadiazine cream (69 ± 4%; p < 0.01). On day 10, the extent of re-epithelialization was the lowest (∼0.2) in the silver-sulfadiazine cream group, while the other 3 treatments performed significantly better. The combination treatment lead to the maximal score of 2 in all rats, which was higher than in the other 3 treatment groups. On day 22, the scar thickness was the smallest in the combination treatment group (560 ± 42 µm), which was significantly less than in the silver-sulfadiazine cream group (712 ± 38 µm; p < 0.05). ConclusionsWe designed and histologically confirmed a reproducible method for induction of superficial partial-thickness burns in rats for preclinical testing. In our model, the combination of zinc-hyaluronan gel with silver foam dressing was more effective than either of its components alone or than silver-sulfadiazine cream.

Contribution of Spicules to Solar Coronal Emission

Recent high-resolution imaging and spectroscopic observations have generated renewed interest in spicules’ role in explaining the hot corona. Some studies suggest that some spicules, often classified as type II, may provide significant mass and energy to the corona. Here we use numerical simulations to investigate whether such spicules can produce the observed coronal emission without any additional coronal heating agent. Model spicules consisting of a cold body and hot tip are injected into the base of a warm (0.5 MK) equilibrium loop with different tip temperatures and injection velocities. Both piston- and pressure-driven shocks are produced. We find that the hot tip cools rapidly and disappears from coronal emission lines such as Fe xii 195 and Fe xiv 274. Prolonged hot emission is produced by preexisting loop material heated by the shock and by thermal conduction from the shock. However, the shapes and Doppler shifts of synthetic line profiles show significant discrepancies with observations. Furthermore, spatially and temporally averaged intensities are extremely low, suggesting that if the observed intensities from the quiet Sun and active regions were solely due to type II spicules, one to several orders of magnitude more spicules would be required than have been reported in the literature. This conclusion applies strictly to the ejected spicular material. We make no claims about emissions connected with waves or coronal currents that may be generated during the ejection process and heat the surrounding area.

Laser‐Assisted Thermomechanical Thinning of MoTe2 in Nanoscale Lateral Resolution

AbstractA key feature of 2D transition metal dichalcogenides (2D‐TMDCs) is that their properties are strongly dependent on their thickness, typically appearing in ultrathin mono‐ or few‐ layers. Thus, precise control of functional nanostructure is critical for fundamental research and applications in 2D‐TMDCs. Here, atomic layer precision thinning of molybdenum ditelluride (MoTe2) at nanoscale lateral resolution by introducing laser irradiated hot tip is demonstrated. The contact of the hot tip on MoTe2 surface promotes oxidation at nanoscale resolution which is simultaneously removed by thermomechanical scribing. This process completes the atomic layer precision thinning of MoTe2 while maintaining the high crystallinity of thinned MoTe2 flake. Further, the electrical properties of the MoTe2 flake are intact after thinning, which proves that the thinned MoTe2 flake obtained by these methods can potentially be utilized for device fabrication. It is believed that the work will enable applications of 2D‐TMDCs that require nanoscale resolution with controlled thickness.

Extrinsic thermoelectric response of coherent conductors

We investigate the thermoelectric response of a coherent conductor in contact with a scanning probe. Coupling to the probe has the dual effect of allowing for the controlled local injection of heat currents into the system and of inducing interference patterns in the transport coefficients. This is sufficient to generate a multiterminal thermoelectric effect even if the conductor does not effectively break electron-hole symmetry and the tip injects no charge. Considering a simple model for noninteracting electrons, we find a nonlocal thermoelectric response which is modulated by the position of the hot probe tip, and a nonreciprocal longitudinal response which leads to a thermoelectric diode effect. A separate investigation of the effects of dephasing and of quasielastic scattering gives further insights into the different mechanisms involved.

Can Hydrolysable Tannins in Diet of Entire Male Pigs Affect Carcass, Pork Quality Traits, Amino and Fatty Acid Profiles, and Boar Taint, Skatole and Androstenone Levels?

Simple SummaryThe increasing societal concern in animal welfare has changed centuries-old practices in pig breeding. One of the most debatable is the surgical castration of piglets commonly used in many European countries primarily performed to avoid boar taint. Boar taint is an undesirable and unpleasant odor that is released by mature entire male pigs. The two main compounds responsible for boar taint are androstenone and skatole. While androstenone as a steroid is mainly affected genetically, skatole as a product of microbial degradation of the amino acid tryptophan in hind gut can be influenced by nutrition and feeding. Recently, several studies revealed that hydrolysable tannins in the pig diet have the potential to reduce skatole accumulation in fat tissue. Thus, the objective of this study was to determine the effect of tannin administration (1, 2, 3, and 4%—sweet chestnut extract rich in hydrolysable tannins) on skatole as well as androstenone deposition in adipose tissue, and to observe the impact on carcass and meat quality, chemical, amino and fatty acid composition, and boar taint perception. The results showed that tannins in the diet of entire males did not affect chemical composition, androstenone accumulation, amino, and fatty acid profile in subcutaneous tissue. The effect on carcass value was only slight. However, higher doses of tannins (3 and 4%) increased cooking loss, and partially increased (4% dosage) electrical conductivity in semimembranosus muscle. Skatole concentration in fat tissue had a tendency to decline after 2–4% administration compared to control group. Similarly, a tendency to drop in boar taint perception using “hot iron” method was found between control and 2%-supplemented pigs. Higher dietary tannins supplementation (3 and/or 4%) increased several saturated (SFA), monounsaturated (MUFA), and polyunsaturated fatty acids (PUFA) in pork.The slaughtering of entire males increases the probability of incidence of tainted pork due to the presence two main compounds—androstenone and skatole. If a surgical castration of young entire male pigs is stopped in the EU countries, fattening of boars is likely to become one of the most commonly used systems in pig farming. Since skatole production and accumulation in fat tissue can be controlled by dietary approaches, several studies have investigated various feed additives to reduce this compound of boar taint. Ones of the most promising is tannins. The aim of this study was to determine the effect of different dietary tannin level supplementation on carcass, pork quality, chemical, amino and fatty acid composition. as well as perception of boar taint and accumulation of skatole and androstenone in adipose tissue. Eighty entire males were randomly distributed to control (T0) and four experimental groups. Control pigs received standard feed mixture (16.8% CP, 13.9 MJ ME) without any tannin supplementation. Experimental pigs received the same diet with administration of 1% (T1), 2% (T2), 3% (T3) and 4% (T4)—sweet chestnut extract rich in hydrolysable tannins for 40 days (from average live weight of 80 kg until slaughter at average weight 122.28 kg ± 5.63 kg). Dietary tannins supplementation did not show any significant effect on chemical composition, cholesterol content, and amino acid composition of muscle as well as fatty acid composition and androstenone accumulation in adipose tissue. A slight or small effect was observed on carcass and meat quality, respectively. Pigs in groups T4 and/or T3-T4 had higher electrical conductivity in semimembranosus muscle and cooking loss value compared to T1, T2 or T0, T1, and T2 groups (p < 0.05). Tannins in the pig’s diet greatly affected fatty acid profile in meat of entire males. The highest tannin levels (4%) increased concentrations of lauric, myristic, vaccenic, linoleic, total PUFA, and n-6 PUFA in muscle compared to the control. Similar results were found in group T3 except for vaccenic, linoleic, and total PUFA. On the contrary, concentrations of heptadecanoic and oleic acids in groups T3 and T4 were lower than those in T1 and T2 groups. Perception of boar taint using „hot iron“ method (insertion a hot iron tip of soldering iron into adipose tissue) tended to decrease in T2 group compared with control. Skatole accumulation in fat tissue was reduced in groups T2-T4 at significance level (p = 0.052–0.055) compared to the control pigs. In summary, tannins supplementation had no effect on chemical and amino acid composition as well as fatty acid profile in adipose tissue, and only slight on carcass value. However, 4% concentration of tannins significantly increased content of some fatty acids compared to control group.

Mixed Motives Insider Trading

If you trade securities on the basis of careful research, then you are a brilliant and shrewd investor. If you trade on the basis of a hot tip from your brother-in-law, an investment banker, then you are a criminal. What if you trade for both reasons? There is no single answer, thanks to a three-way circuit split. Some courts would forgive you according to your lawful trading motives, some would convict you in keeping with your bad motives, and some would hand the issue to the jury. Sometimes called the “awareness/use” debate or the “possession/use” debate, the proper treatment of mixed motive traders has occupied dozens of law review articles over the last thirty years. This Article demonstrates that courts and scholars have so far followed the wrong reasons to the wrong answers. Instead, this Article takes trader motives seriously, drawing on insights and solutions from the broader jurisprudence of mixed motive. This analysis generates a new legal test and demonstrates the test’s superiority.

HOTTIP regulates progression of endometrial cancer via activating PI3K/AKT pathway.

The article "HOTTIP regulates progression of endometrial cancer via activating PI3K/AKT pathway, by Q. Guan, Q. Zhang, C. Zhang, Q. Liu, Q.-L. Ren, published in Eur Rev Med Pharmacol Sci 2018; 22(12): 3727-3733-DOI: 10.26355/eurrev_201806_15252-PMID: 29949146" has been withdrawn from the authors. The Publisher apologizes for any inconvenience this may cause. https://www.europeanreview.org/article/15252.

Nanosecond pulsed discharges in distilled water-Part II: line emission and plasma propagation

Nanosecond plasmas in liquids can initiate chemical processes that are exploited in the fields of water treatment, electrolysis or biomedical applications. The understanding of these chemical processes relies on unraveling the dynamics of the variation of pressures, temperatures and species densities during the different stages of plasma ignition and plasma propagation as well as the conversion of the liquid into the plasma state and the gas phase. This is analyzed by monitoring the emission of nanosecond pulsed plasmas that are generated by high voltages of 20 kV and pulse lengths of 10 ns applied to a tungsten tip with 50 μm diameter immersed in water. The spectra are acquired with a temporal resolution of 2 ns and the emission pattern is modelled by a combination of black body radiation from the hot tungsten tip and the pronounced emission lines of the hydrogen Balmer series. The data indicate two contributions of the hydrogen line radiation that differ with respect to the degree of self-absorption. It is postulated that one contribution originates from a recombination region showing strong self absorption and one contribution from an ionization region showing very little self-absorption. The emission lines from the ionization region are evaluated assuming Stark broadening, that yielded electron densities up to 5 × 1025 m−3. The electron density evolution follows the same trend as the temporal evolution of the voltage applied to the tungsten tip. The propagation mechanism of the plasma is similar to that of a positive streamer in the gas phase, although in the liquid phase field effects such as electron transport by tunneling should play an important role.

Strong Self-Propelled Swing Motion Due to the Growing Instability on Heat Transfer

We report that pendulums having a hot tip immersed in water exhibit a strong self-propelled swing motion. This large swing motion is observed when the temperature of the hot tip becomes that of the...

Expression of HOXA terminal transcript antisense RNA in hepatocellular carcinoma tissues and its effect on proliferation, invasion and migration of hepatocellular carcinoma HepG2 cells

Objective To investigate the expression of HOXA terminal transcript antisense RNA (HOTTIP) in hepatocellular carcinoma (HCC) tissues and to explore its effect on proliferation, invasion and migration in HepG2 cells. Methods A total of 60 cases with HCC tissues undergoing excision surgery and 60 cases of corresponding paracancerous tissues from January 2012 to June 2018 in Dandong First Hospital of Liaoning Province were collected. The expressions of HOTTIP in HCC tissues and paracancerous tissues were detected by using real-time quantitative polymerase chain reaction (RT-qPCR), and the relationship between the expression and clinicopathological features was analyzed. HepG2 cell line with high expression of HOTTIP constructed by cell transfer technique was treated as the experimental group, and the empty plasmid pcDNA3.1-NC was treated as the control group. The effect of HOTTIP on the proliferation of HepG2 cells was detected by using CCK-8 method, and the effect of HOTTIP on invasion and migration of HepG2 cells was detected by using Transwell assay. Results The expression of HOTTIP mRNA in HCC tissues was higher than that in paracancerous tissues, and there was no statistically significant difference (1.9±0.6 vs. 0.9±0.7, t = 6.069, P 0.05). The results of RT-qPCR showed that the expression of HOTTIP mRNA in HepG2 cells was increased after transfection of overexpressed HOTTIP and the differences was statistically significant compared with the control group (63±6 vs. 13±9, t = 9.129, P < 0.01). The results of CCK-8 method showed that the proliferation activity of cells was enhanced after the overexpression of HOTTIP in HepG2 cells (24 h, 36 h, 72 h at 490 nm absorbance was 1.497 ± 0.017 vs. 0.826±0.006, 2.002±0.025 vs. 1.211±0.020, 3.257±0.042 vs. 1.772±0.021), and the differences were statistically significant (t values were 5.321, 7.349, 8.793, all P < 0.01). In Transwell invasion assay, the number of cells transferred into the basement membrane in the experimental group was more than that in the control group (101±9 vs. 41±11), and the difference was statistically significant (t = 6.839, P < 0.01). In Transwell migration assay, the number of cells transferred into the basement membrane in the experimental group was more than that in the control group (112±9 vs. 53±11), and the difference was statistically significant (t = 7.105, P < 0.01). Conclusion The expression of HOTTIP in HCC tissues is up-regulated, and the overexpression of HOTTIP can promote the proliferation, invasion and migration of HCC cells. Key words: Liver neoplasms; HOXA terminal transcript antisense RNA; Cell proliferation; Neoplasm invasiveness; Neoplasm metastasis

Weak biophoton emission after laser surgery application in soft tissues: Analysis of the optical features.

Nowadays, laser scalpels are commonly used in surgery, replacing the traditional surgical scalpels for several applications involving cutting or ablating living biological tissue. Laser scalpels are generally used to concentrate light energy in a very small-sized area; light energy is then converted in heat by the tissues. In other cases, the fiber glass tip of the laser scalpel is heated to high temperature and used to cut the tissues. Depending on the temperature reached in the irradiated area, different effects are visible in the tissues. In this study, we report the discovery and characterization of the light emitted by soft mammalian biological tissues from seconds to hours after laser surgery application. A laser diode (with hot fiber glass tip) working at 808 nm and commercially available for medical and dentistry applications was used. The irradiated tissues (red meat, chicken breast and fat) showed light emission in the visible range, well detectable with a commercial charge coupled device (CCD) camera. The time decay of the light emission, the laser power effects and the spectral features in the range 500 to 840 nm in the different tissues are here reported.

Hot-Tip Scanning Electrochemical Microscopy: Theory and Experiments Under Positive and Negative Feedback Conditions.

Hot-tip scanning electrochemical microscopy (HT-SECM) is a novel surface characterization technique utilizing an alternating current (ac) polarized disk microelectrode as a probe. A high-frequency (∼100 MHz) ac waveform applied between the tip and a counter electrode causes the resistive heating of the surrounding electrolyte solution that leads also to the electrothermal fluid flow (ETF). The effects of the temperature and the convection driven by the ETF result in the increased rate of mass transfer of the redox species. In this paper, HT-SECM was studied in positive and negative feedback modes, for which approach curves and cyclic voltammograms were recorded. The experimental data showed that the use of a hot tip leads to a more pronounced feedback compared to that at room temperature. Numerical simulations performed in COMSOL Multiphysics supported the experimental findings. Additional analytical approximations were developed that could be used to predict the faradaic response in HT-SECM experiments. Finally, a possible contribution to the current from the Soret effect was studied theoretically. A good understanding of HT-SECM was achieved, both experimentally and theoretically, suggesting that this methodology could be applied to investigate electrode kinetics under the conditions of elevated temperature and increased rate of mass transfer.

Diagnostic Value of Plasma Long Non-coding RNA HOTTIP as a Non-invasive Biomarker for Colorectal Cancer (A Case- Control Study).

Long non-coding RNAs (lncRNAs), associated with various cancers including colorectal cancer (CRC), could be collected from body fluids easily. Our aims were to determine the expression level of HOTTIP lncRNA in plasma samples of healthy individuals and CRC patients as well as their relationship with clinico-pathological characteristics of patients. First, total RNA was extracted from the plasma samples of 100 subjects including 50 patients and 50 age and sex matched healthy persons. Then, gene expression was measured using real-time PCR technique. The sensitivity and specificity of HOTTIP dysregulation in CRC and healthy individual’s plasma was measured by receiver operating characteristic (ROC) analysis. As compared with healthy controls, HOTTIP lncRNA was over expressed in a statistically significant manner in plasma samples of patients (P=0.001). Significant relationship between HOTTIP expression and positive family history of CRC was observed, too (P=0.04). The ROC curve analysis showed an AUC value of 0.775, a specificity of 82%, a sensitivity of 76%, with a cut off value equal to 2.40 (P =0.001). HOTTIP transcript can be proposed as a new biomarker for early diagnosis due to the increased expression in plasma samples of patients with CRC and the relatively high sensitivity and specificity.

Evaluation of cleaning efficacy-related properties of root canal irrigant activation using a computer-controlled hot tip powered with a diode laser

Evaluation of cleaning efficacy-related properties of root canal irrigant activation using a computer-controlled hot tip powered with a diode laser

Experimental and theoretical investigation of heat transfer in platform bed during polymer extrusion based additive manufacturing

Heat transfer plays a key role in polymer extrusion based additive manufacturing (AM) processes. Measurement and modeling of how temperature distribution on the platform bed changes with time during the dispensing of a polymer filament is of particular interest, as it determines the effectiveness of merging with neighboring filaments, and therefore, the properties of the built part. This paper reports infrared thermography based measurement of temperature field on the platform bed as a function of time during filament dispense and comparison with an analytical model based on moving heat source theory. Measurements identify two key heat transfer processes that influence temperature distribution on the bed. Data show that diffusion of thermal energy deposited on the bed with the filament and heat transfer from the hot nozzle tip both influence the temperature distribution on the bed. The relative contributions of these two sources of temperature rise on the bed are measured for different values of key process parameters. Measurement of temperature rise due to diffusion of thermal energy deposited on the bed is found to be in excellent agreement with an analytical model based on moving heat source theory. Evolution of the temperature field after completion of rastering of a line is measured. These data play a critical role in determining how effectively a filament merges with neighboring filaments. By identifying the key heat transfer processes that determine the temperature field on the platform bed, this work contributes towards thermal optimization of polymer-based additive manufacturing.