Holograms Of Objects Research Articles

Infrared digital reflective-holographic 3D shape measurements

We present a series of experiments to demonstrate digital holography on reflective objects at wavelength 10.6μm of a CO2 laser using a pyrocam array. Fresnel holograms of reflective objects are recorded by a Mach–Zehnder interferometer. We describe a method for improving the accuracy of the numerical reconstructions and for compensating the loss of resolution at longer wavelength by Fresnel reconstruction of digitally recorded infrared holograms.

Iterative algorithm of phase determination in digital holography for real-time recording of real objects

We propose a numerical method to obtain complex amplitude distribution of a three-dimensional (3D) object from a digital hologram. The method consists of two processes. The first process is to measure simultaneously a hologram of the 3D object and an object intensity distribution by two image sensors. These intensity distributions give us the amplitude and absolute value of phase of the 3D object at the image sensor plane. The second process is the determination of phase distribution by a proposed iterative process based on the criterion that the reconstructed 3D object is in focus and its conjugate reconstruction is out of focus. Numerical and experimental results show the effectiveness of the proposed method.

Histogram Approaches for Lossy Compression of Digital Holograms of Three-Dimensional Objects

We present a novel nonuniform quantization compression technique-histogram quantization-for digital holograms of 3-D real-world objects. We exploit a priori knowledge of the distribution of the values in our data. We compare this technique to another histogram based approach: a modified version of Max's algorithm that has been adapted in a straight-forward manner to complex-valued 2-D signals. We conclude the compression procedure by applying lossless techniques to our quantized data. We demonstrate improvements over previous results obtained by applying uniform and nonuniform quantization techniques to the hologram data.

Analysis of partially occluded objects encoded in digital holograms using the Wigner distribution function

In this paper, we analysis the effect of partial occlusions in scenes captured using digital holography. We reconstruct the scene from different perspectives. These reconstructions are then combined, allowing one to overcome foreground occlusions that are obscuring one's view of the scene. The analysis in this paper is carried out with the aid of the Wigner distribution function, allowing us to visualize the energy of the object wavefield and the occluding object. wavefield in phase space. We show that by iteratively selecting different views, the original scene can be reconstructed efficiently. This technique would be useful in situations where transmission of the whole digital hologram, or exhaustive reconstruction of every perspective, was not feasible. We provide results using optically captured digital holograms of real-world objects, and simulated occlusions.

Improvement of accuracy in digital holography by use of multiple holograms

Speckle pattern decorrelation reduces the accuracy of interferometric shape and deformation measurements. We introduce a technique for the reduction of speckle noise in digital holography. The method is not based on classical filtering techniques such as median filters. Instead it utilizes the shift theorem of the Fourier transform. For this method several holograms of the same object under test are recorded. The reconstruction leads to a set of object wave fields with different speckle patterns. A proper averaging procedure, taking into account the properties of the wrapped phases, leads to an improvement of the accuracy in the resulting phase difference. The theory of the applied method is described and our first results for technical components with an improvement of accuracy up to 1/57 of the wavelength are presented.

Reconstruction of partially occluded objects encoded in three-dimensional scenes by using digital holograms

We propose a task-specific digital holographic capture system for three-dimensional scenes, which can reduce the amount of data sent from the camera system to the receiver and can effectively reconstruct partially occluded objects. The system requires knowledge of the object of interest, but it does not require a priori knowledge of either the occlusion or the distance the object is from the camera. Subwindows of the camera-plane Fresnel field are digitally propagated to reveal different perspectives of the scene, and these are combined to overcome the unknown foreground occlusions. The nature of the occlusions and the effect of subwindows are analyzed thoroughly by using the Wigner distribution function. We demonstrate that a careful combination of reconstructions from subwindows can reveal features that are not apparent in a reconstruction from the whole hologram. We provide results by using optically captured digital holograms of real-world objects and simulated occlusions.

Optical sectioning by optical scanning holography and a Wiener filter

I propose a novel digital technique that reduces defocus noise in the reconstruction of the sectional images from the complex hologram of a thick object. In three-dimensional microscopy applications of holography, reducing the defocused light scattered from outside the focused plane is an important issue. In this technique I first extract a complex hologram of a thick object by using optical scanning holography. After that, I separate the power spectra of the focused and defocused planes from the complex hologram. Finally, I construct a Wiener filter by use of the power spectra. The Wiener filter reduces the defocus noise in the reconstruction of the sectional image of the focused plane. Computer simulations show that the proposed Wiener filter reduces the defocus noise and provides the sectional images.

A companding approach for nonuniform quantization of digital holograms of three-dimensional objects

We apply two novel nonuniform quantization techniques to digital holograms of three-dimensional real-world objects. Our companding approach, combines the efficiency of uniform quantization with the improved performance of nonuniform quantization. We show that the performance of companding techniques can be comparable with k-means clustering and a competitive neural network, while only requiring a single-pass processing step. The quantized holographic pixels are coded using lossless techniques for the calculation of compression ratio.

Compression of digital holograms of three-dimensional objects using wavelets

We present the results of what we believe is the first application of wavelet analysis to the compression of complex-valued digital holograms of three-dimensional real-world objects. We achieve compression through thresholding and quantization of the wavelet coefficients, followed by lossless encoding of the quantized data.

Digital holographic scanning of large objects using a rotating optical slab

Simple optical glass is used in digital holographic set up to scan and record holograms of a large object. Dimension of the object is such that it does not satisfy sampling theorem. Experimental results and calculations illustrate that an optical slab can be used to scan the surface of the large object by this method. © 2007 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 16, 258–261, 2006

Method for superposing reconstructed images from digital holograms of the same object recorded at different distance and wavelength

A method for allowing direct perfect superimposition and comparison of Fresnel-transform reconstructions of digital holograms recorded of the same object at different distances and wavelengths is proposed and demonstrated. The method takes into account the dependence of the reconstruction pixel on the distance and the wavelength by the Fresnel-transform algorithm. The method avoids the need for image scaling at the end of the reconstruction process that usually is performed in multi-wavelength digital holography. Demonstration is given by superposing the numerical reconstructions of holograms recorded at different distances and wavelengths. The method can be potentially very useful for real-time monitoring in biological processes or for recognition and ranging by multiple wavelengths of a target with fast movements or finally for very fast investigation and study of very fast processes.

Incoherent recovering of the spatial resolution in digital holography

We report on a technique to recover the spatial resolution of digitally recorded and reconstructed holograms of large objects. Due to the high-contrast speckle noise diminishes the spatial resolution in coherent imaging systems our proposal is based on the reduction of the contrast of it. This aim is achieved through the superposition on an intensity basis of digitally reconstructed holograms of the same static scene. We show a theoretical justification of the procedure and experimentally-obtained results of applying the technique with digitally reconstructed holograms of an object with very poor optical contrast.

Computer-generated holograms for three-dimensional surface objects with shade and texture

Digitally synthetic holograms of surface model objects are investigated for reconstructing three-dimensional objects with shade and texture. The objects in the proposed techniques are composed of planar surfaces, and a property function defined for each surface provides shape and texture. The field emitted from each surface is independently calculated by a method based on rotational transformation of the property function by use of a fast Fourier transform (FFT) and totaled on the hologram. This technique has led to a reduction in computational cost: FFT operation is required only once for calculating a surface. In addition, another technique based on a theoretical model of the brightness of the reconstructed surfaces enables us to shade the surface of a reconstructed object as designed. Optical reconstructions of holograms synthesized by the proposed techniques are demonstrated.

Computer-Generated Holograms Based on the Three-Dimensional Fourier Spectrum

A method to synthesize a computer-generated hologram (CGH) of real-existing objects from projection images is proposed. Different from other similar methods, our method enables the synthesis of a CGH with only one-dimensional (1-D) mechanical scanning of the objects. Our method is connected with the three-dimensional (3-D) Fourier spectrum of the objects by the 3-D central slice theorem (CST). Two efficient recording techniques for projection images and numerical experiments to verify our principle is discussed. A comparison between the two techniques is also presented from the viewpoint of diffraction efficiency. © 2005 The Optical Society of Japan

Gratings formed during nonlinear recording of superimposed holograms

Nonlinear recording of superimposed holograms has been theoretically studied. In the case of holograms recorded by method of angular or phase multiplexing, nonlinearity of the recording process leads to the appearance of gratings of two types, both meeting Bragg’s condition in the course of reconstruction. The gratings of one type change the hologram diffraction efficiency, while those of the other give rise to diffractional cross-talk. The strength of gratings responsible for the cross-talk decreases until vanishing with increasing mutual orthogonality of the hologram object waves.

Tomographic reconstruction of multiple in-line electron holograms of realistic objects

In theoretical low energy electron point source microscopy, simulated holograms are made and used to reconstruct atomic clusters. In previous investigations, simple test clusters were used for convenience. In this paper we explore more realistic structures composed of a single type of atom such as diamond, graphite and Buckminsterfullerene—all of which consist of carbon atoms. We also examine clusters with two or more distinct atom types, including TiO 2, CuO, Pt 3O 4, Ga 3Pt 5, WC, MgCO 3, and MgO. Reconstructions from a single hologram do not give atomic resolution, and consist instead of ‘spurious peaks’ that are not located at atomic sites, as well as ‘atomic peaks’ close to atomic sites. Here we apply methods we developed previously to remove all spurious peaks. We show final reconstructions that consist only of atomic peaks located very close to atomic sites.

Elimination of zero-order diffraction in digital off-axis holography

A simple experimental method of eliminating zero-order diffraction in the reconstructed image of off-axis digital holography is presented. Holographic diffraction grating acting as a beam splitter, an off-axis holography system is formed. The holograms of object with different recording parameters are obtained by adjusting the reflecting mirror in the recording optical system to vary the incidence orientation of the object beam in CCD to introduce a phase shift. The zero-order image can be eliminated by numerically processing the holograms of object with different recording parameters. The theoretical analyses have been done in detail and the experimental results are also given. The zero-order image eliminated, the area of reconstructed image increases remarkably, the image quality can then be significantly improved and the better resolution obtained. The experimental results show that the method presented in this paper is feasible, simple in optical system and easy in operation and data processing.

Difference-frequency-generated holograms of two-dimensional objects

We demonstrate both analytically and experimentally that second-order nonlinear interaction in a uniaxial crystal produces a holographic replica of one of the incident fields. In particular, we consider difference-frequency generation and directly calculate the field transformation that is produced by the nonlinear interaction for some simple but nontrivial two-dimensional objects, such as a long wire, a circular hole, and a regular net. Finally we show experimental results for such objects that validate the theoretical calculations.

Full-color computer-generated holograms using 3-D Fourier spectra

A new method for synthesizing a full-color computer-generated hologram (CGH) of real-existing objects has been proposed. In this method, the synthesizing process of CGHs and the adjustments of magnifications for each wavelength are considered based on parabolic sampling of three-dimensional (3-D) Fourier spectra. Our method requires only one-dimensional (1-D) azimuth scanning of objects, does not require any approximations in the synthesizing process, and can perform efficient magnification adjustments required for color reconstruction. Experimental results have been presented to verify the principle and validity of this method.

Computer-generated holograms of three-dimensional objects synthesized from their multiple angular viewpoints.

Synthesizing computer-generated holograms (CGHs) of a general three-dimensional (3D) object is usually a heavy computational task. We propose and demonstrate a new algorithm for computing CGHs of 3D objects. In our scheme, many different angular projections of computer-designed 3D objects are numerically processed to yield a single two-dimensional complex matrix. This matrix is equivalent to the complex amplitude of a wave front on the rear focal plane of a spherical lens when the object is located near the front focal point and illuminated by a plane wave. Therefore the computed matrix can be used as a CGH after it is encoded to a real positive-valued transparency. When such CGH is illuminated by a plane wave, a 3D real image of the objects is constructed. The number of computer operations are equivalent to those of a two-dimensional Fourier CGH. Computer and optical constructions of 3D objects, both of which show the feasibility of the proposed approach, are described.