Histidine Buffer Research Articles

Development of Long-Term Stability of Enveloped rVSV Viral Vector Expressing SARS-CoV-2 Antigen Using a DOE-Guided Approach

Liquid formulations have been successfully used in many viral vector vaccines including influenza (Flu), hepatitis B, polio (IPV), Ebola, and COVID-19 vaccines. The main advantage of liquid formulations over lyophilized formulations is that they are cost-effective, as well as easier to manufacture and distribute. However, studies have shown that the liquid formulations of enveloped viral vector vaccines are not stable over extended periods of time. In this study, we explored the development of the liquid formulations of an enveloped recombinant Vesicular Stomatitis Virus (VSV) expressing the SARS-CoV-2 spike glycoprotein. To do so, we used a design of experiments (DOE) method, which allowed us to assess the stability dynamics of the viral vector in an effective manner. An initial stability study showed that trehalose, gelatin, and histidine were effective at maintaining functional viral titers during freeze–thaw stress and at different temperatures (−20, 4, 20, and 37 °C). These preliminary data helped to identify critical factors for the subsequent implementation of the DOE method that incorporated a stress condition at 37 °C. We used the DOE results to identify the optimal liquid formulations under the selected accelerated stress conditions, which then guided the identification of long-term storage conditions for further evaluation. In the long-term stability study, we identified several liquid formulations made of sugar (sucrose, trehalose, and sorbitol), gelatin, and a histidine buffer that resulted in the improved stability of rVSV-SARS-CoV-2 at 4 °C for six months. This study highlights an effective approach for the development of liquid formulations for viral vector vaccines, contributing significantly to the existing knowledge on enveloped viral vector thermostability.

Enhanced selective detection of Sudan III dye in cosmetics utilizing nitrogen-doped carbon quantum dots (NCQDs) combined with Molecularly Imprinted Polymer (MIP)

Sudan III, a commonly used dye in cosmetics, poses health risks due to its potential carcinogenicity and allergenic properties, necessitating rigorous monitoring of its illegal presence in consumer goods. In this study, a novel fluorometric assay employing Nitrogen-doped Carbon Quantum Dots coated with Molecularly Imprinted Polymers (NCQDs/SiO2@MIP) is presented to accurately and sensitively detect Sudan III. Unlike other majority analytes, Sudan III shows fluorescence enhancement upon binding with our NCQDs-MIPs. Under optimal conditions—pH 7.0, histidine buffer, 15 min incubation, and 500 mg/L NCQDs/SiO2@MIP—the method achieves a low 1.4 nM (0.49 ppb) detection limit and a broad linear range (5–800 nM). With precision (RSD < 5 %) and selectivity surpassing Sudan dyes and common cosmetic ingredients, the method’s reliability is evident. Cross-validation against LC-MS/MS confirms the accuracy of Sudan III quantification in real cosmetic samples. This NCQDs/SiO2@MIP fluorometric sensor holds promise for rapid on-site detection of Sudan III and other contaminants in cosmetics, offering superior sensitivity, selectivity, and minimal sample preparation requirements.

Comparative analysis and mechanistic insights into polysorbate 80 stability differences in biopharmaceutical buffer systems

Polysorbate 80 (PS80) is a non-ionic surfactant extensively utilized in biopharmaceutical formulations for stabilizing proteins. However, PS80 degradation has become a widespread concern throughout the industry over the past decade. In this work, the impact of most frequently employed pH/buffer systems on the stability of PS80 was assessed. PS80 degraded fastest in histidine buffer, followed by acetate and succinate buffers, whereas it remained stable in citrate, phosphate and tris buffers. When there was PS80 degradation, the extent of degradation was found to be pH-dependent. The predominant degradation pathway was oxidation mainly triggered by metal ions. The varying stability of PS80 across different pH/buffer systems was attributed to the role of buffer agents, which can either promote or inhibit the oxidation process through their interactions with metal ions. Specifically, buffers except histidine exhibited metal ion chelation similar to ethylenediaminetetraacetic acid (EDTA), which can suppress the oxidation of PS80, although the effectiveness of chelation varies to different extents. Furthermore, the binding capacity appeared stronger at higher pH in acetate and succinate buffers. Conversely, histidine was reported to form pro-oxidant complexes with metal ions to accelerate PS80 degradation, especially at higher pH levels. Our work for the first time offers a comprehensive understanding of PS80 oxidation in biopharmaceutical buffer systems. This provides a strong foundation for buffer and excipient selection in parenteral formulations.

Polysorbate stability: Effects of packaging materials, buffers, counterions, and pH

Polysorbates, widely used excipients in drug formulations, present a stability challenge due to complex degradation processes. This study investigates the hydrolysis of polysorbate (PS) under temperature stress (50 °C), focusing on the impact of primary packaging materials (glass vs. plastic vials), buffers (histidine and acetic acid), counterions (chloride vs. malate), and pH (4–7). Our findings reveal that leachables from plastic vials inhibit PS degradation in both histidine and acetic acid buffers. Kinetic parameters derived from sigmoidal fitting suggest distinct degradation mechanisms for each buffer. Furthermore, the malate counterion with histidine displays inhibitory effects on PS hydrolysis. Principal component analysis was employed to identify key factors. These results highlight the critical role of excipients and packaging in PS stability, providing valuable insights for biopharmaceutical formulation development and a deeper understanding of PS degradation complexities.

Alternative buffer systems in biopharmaceutical formulations and their effect on protein stability.

The formulation of biopharmaceutical drugs is designed to eliminate chemical instabilities, increase conformational and colloidal stability of proteins, and optimize interfacial stability. Among the various excipients involved, buffer composition plays a pivotal role. However, conventional buffers like histidine and phosphate buffers may not always be the optimal choice for all monoclonal antibodies (mAbs). In this study, we investigated the effects of several alternative buffer systems on seven different mAbs, exploring various combinations of ionic strengths, concentrations of the main buffer component, mAb concentrations, and stress conditions. Protein stability was assessed by analyzing soluble aggregate formation through size exclusion chromatography. At low protein concentrations, protein instability after temperature stress was exclusively observed in the bis-TRIS/ glucuronate buffer. Conversely, freeze-thaw stress led to a significant increase in aggregate formation in tested formulations, highlighting the efficacy of several alternative buffers, particularly arginine/ citrate, in preserving protein stability. Under temperature stress, the introduction of arginine to histidine buffer systems provided additional stabilization, while the addition of lysine resulted in protein destabilization. Similarly, the incorporation of arginine into histi-dine/HCl buffer further enhanced protein stability during freeze--thaw cycles. At high protein concentrations, the histidine/citrate buffer emerged as one of the most optimal choices for addressing temperature and light-induced stress. The efficacy of histidine buffers in combating light stress might be attributed to the light-absorbing properties of histidine molecules. Our findings demonstrate that the development of biopharmaceutical formulations should not be confined to conventional buffer systems, as numerous alternative options exhibit comparable or even superior performance.

Determination of solid-state acidity of lyophilized trehalose containing citrate, phosphate, and histidine buffers using UV/VIS diffuse reflectance and solid-state NMR spectroscopy

Changes in the protonation state of lyophilized proteins can impact structural integrity, chemical stability, and propensity to aggregate upon reconstitution. When a buffer is chosen, the freezing/drying process may result in dramatic changes in the protonation state of the protein due to ionization shift of the buffer. In order to determine whether protonation shifts are occurring, ionizable probes can be added to the formulation. Optical probes (dyes) have shown dramatic ionization changes in lyophilized products, but it is unclear whether the pH indicator is uniform throughout the matrix and whether the change in the pH indicator actually mirrors drug ionization changes. In solid-state NMR (SSNMR) spectroscopy, the chemical shift of the carbonyl carbon in carboxylic acids is very sensitive to the ionization state of the acid. Therefore, SSNMR can be used to measure ionization changes in a lyophilized matrix by employing a small quantity of an isotopically-labeled carboxylic acid species in the formulation. This paper compares the apparent pH of six trehalose-containing lyophilized buffer systems using SSNMR and UV-Vis diffuse reflectance spectroscopy (UVDRS). Both SSNMR and UVDRS results using two different ionization probes (butyric acid and bromocresol purple, respectively) showed little change in apparent acidity compared to the pre-lyophilized solution in a sodium citrate buffer, but a greater change was observed in potassium phosphate, sodium phosphate, and histidine buffers. While the trends between the two methods were similar, there were differences in the numerical values of equivalent pH (pHeq) observed between the two methods. The potential causes contributing to the differences are discussed.

Predicting the Stability of Lyophilized Human Serum Albumin Formulations Containing Sucrose and Trehalose Using Solid-State NMR Spectroscopy: Effect of Storage Temperature on 1H T1 Relaxation Times

In a lyophilized protein/disaccharide system, the ability of the disaccharide to form a homogeneous mixture with the protein and to slow the protein mobility dictates the stabilization potential of the formulation. Human serum albumin was lyophilized with sucrose or trehalose in histidine, phosphate, or citrate buffer. 1H T1 relaxation times were measured by solid-state NMR spectroscopy and were used to assess the homogeneity and mobility of the samples after zero, six, and twelve months at different temperatures. The mobility of the samples decreased after 6 and 12 months storage at elevated temperatures, consistent with structural relaxation of the amorphous disaccharide matrix. Formulations with sucrose had lower mobility and greater stability than formulations with trehalose.

Near UV light photo-degradation of histidine buffer: Mechanisms and role of Fe(III)

Pharmaceutical formulations are sensitive to light-induced degradation. Recent studies have attributed some of the light sensitivity to the presence of Fe(III), the most prevalent metal leachable from pharmaceutical containers. Histidine (His) can promote Fe(III) leaching from stainless steel, especially at elevated storage temperatures. Since there is the chance that combinations of His and Fe(III) are present in pharmaceutical formulations, we investigated the photo-degradation mechanisms of Fe(III)-containing His buffer during expsoure to near UV light. Our results indicate the formation of carbon dioxide radical anion (•CO2−), a powerful reductant, and other photoproducts such as aldehydes and His-derived radicals. The generation of •CO2− can be promoted by increasing concentrations of Fe(III) and inhibited by the addition of the Fe(III) chelator EDTA. Mechanistically, product formation can be rationalized by photo-induced ligand-to-metal-charge-transfer (LMCT), followed by a series of radical transformations of reaction intermediates.

Photo-induced site-specific oxidative fragmentation of IgG1 mediated by iron(III)-containing histidine buffer: Mechanistic studies and excipient effects

Fragmentation may compromise the clinical efficacy and safety profile of monoclonal antibodies (mAbs). We recently reported that Fe(III)-containing histidine (His) buffer mediates site-specific mAb fragmentation within the Fc domain when exposed to visible light (Y. Zhang and C. Schöneich, Mol. Pharm. 2023, 20, 650–662). Here, we show that this fragmentation proceeds even more efficiently under near-UV light. Several formulation strategies were applied in an attempt to reduce the photo-induced fragmentation. In solution formulations, the fragmentation can be mitigated by reducing the concentration of His buffer, adding Fe(III)-chelating agents, and replacing His with other amino acids. Fragmentation can be almost completely inhibited by formulating the protein in the lyophilized state. Mechanistically, His plays a critical role in the fragmentation process, likely due to its affinity for Fe(II), driving a photo-redox reaction towards product formation.

Investigation of excipients impact on polysorbate 80 degradation in biopharmaceutical formulation buffers

A study on the polysorbate 80 stability in various formulation buffers commonly used in biopharmaceuticals was performed, to investigate the excipients influence on polysorbate 80 degradation. Polysorbate 80 is a common excipient in biopharmaceutical products. However, its degradation will potentially impact the drug product quality, and may trigger protein aggregation and particles formation. Due to the heterogeneity of the polysorbates and the mutual effects with other formulation compositions, the study of polysorbate degradation is challenging. Herein, a real-time stability study was designed and performed. The polysorbate 80 degradation trend was monitored by fluorescence micelle-based assay (FMA), reversed-phase-ultra-performance liquid chromatography-evaporative light scattering detector (RP-UPLC-ELSD) assay, and LC-MS assay. These assays provide orthogonal results to reveal both the micelle-forming capability and the compositional changes of polysorbate 80 in different buffer systems. The degradation occurred after a period of storage under 25 °C in different trend, which indicates the excipients could impact the degradation kinetics. Upon comparison, the degradation is prone to happen in histidine buffer than in acetate, phosphate or citrate buffers. LC-MS confirms oxidation as an independent degradation pathway with detection of the oxidative aldehyde. Thus, it is necessary to pay more attention to the excipients selection and their potential impact on polysorbate 80 stability to achieve longer shelf life for the biopharmaceuticals. Besides, the protective roles of several additives were figured out, which could be applied as potential industrial solutions to the polysorbate 80 degradation issues.

Reformulation and Thermal Stability of a Therapeutic Anti-Cocaine mAb

We concentrated and reformulated the anti-cocaine mAb, h2E2, to reduce the amount of sucrose and histidine buffer infused with the mAb, to satisfy FDA maximum exposure levels for those components for use in clinical trials. After concentration of the original 20 mg/ml mAb, 4 reformulation buffers were evaluated for suitability. The concentration of histidine was reduced from 10 mM to 3 or 0 mM, and the concentration of sucrose reduced from 10% to 2, 4, or 6%. The approximately 100 mg/ml reformulated mAb samples were analyzed for oligomer formation, aggregation, concentration of the emulsifier polysorbate 80, and thermal stability. These reformulated mAb samples were also assessed for their stability at 40°C from 1 day to 12 weeks. As expected, long term thermal resistance to oligomer formation increased as a function of increasing sucrose concentration. Interestingly, unbuffered reformulated mAb displayed a less than or equal to tendency to form oligomers and aggregates, compared to the histidine buffered samples. Importantly, even after 12 weeks at 40°C, all the reformulated samples displayed little aggregation, and bound their antigen (cocaine) with identical affinities and thermodynamics, as measured by isothermal titration calorimetry (ITC). These ITC thermodynamic binding parameters are consistent with recently published values for the original formulation of this mAb. In all reformulated samples there was a slight decrease in the number of cocaine binding sites after 12 weeks at 40°C, likely due to the parallel small increase in soluble oligomeric antibody, suggesting that soluble oligomeric mAb may no longer bind cocaine with high affinity.

Development of the Drug Product Formulation of the Bevacizumab Biosimilar PF-06439535 (Bevacizumab-bvzr).

PF-06439535 (bevacizumab-bvzr; Zirabev®) is a biosimilar of bevacizumab reference product (RP; Avastin®). This study describes the formulation development for PF-06439535. PF-06439535 was formulated in several buffers and stored for 12 weeks at 40°C to determine the optimal buffer and pH under stressed conditions. Subsequently, PF-06439535 at 100 and 25mg/mL was formulated in a succinate buffer with sucrose, edetate disodium dihydrate (EDTA), and polysorbate 80, and in the RP formulation. Samples were stored at -40°C to 40°C for ≤22 weeks. The physicochemical and biological properties relevant to the safety, efficacy, quality, or manufacturability were investigated. When stored at 40°C for 13 days, PF-06439535 demonstrated optimal stability in histidine or succinate buffers and was more stable in the succinate formulation than the RP formulation, under both real-time and accelerated stability conditions. There were no significant changes in the quality attributes of 100 mg/mL PF-06439535 after storage at -20°C and -40°C for 22 weeks, and there were no changes in the quality attributes of 25 mg/mL PF-06439535 after storage at 5°C (recommended storage temperature). Changes were observed at 25°C for 22 weeks or at 40°C for 8weeks as expected. No new degraded species were observed in the biosimilar succinate formulation compared with the RP formulation. Results demonstrated that 20 mM succinate buffer (pH5.5) is the PF-06439535 preferred formulation, and that sucrose is an effective cryoprotectant for processing and frozen storage, and an effective stabilizing excipient for 5°C liquid storage of PF-06439535.

Optimizing a therapeutic humanized follicle-stimulating hormone-blocking antibody formulation by protein thermal shift assay.

Biopharmaceutical products are formulated using several Food and Drug Administration (FDA) approved excipients within the inactive ingredient limit to maintain their storage stability and shelf life. Here, we have screened and optimized different sets of excipient combinations to yield a thermally stable formulation for the humanized follicle-stimulating hormone (FSH)-blocking antibody, MS-Hu6. We used a protein thermal shift assay in which rising temperatures resulted in the maximal unfolding of the protein at the melting temperature (Tm ). To determine the buffer and pH for a stable solution, four different buffers with a pH range from 3 to 8 were screened. This resulted in maximal Tm s at pH 5.62 for Fab in phosphate buffer and at pH 6.85 for Fc in histidine buffer. Upon testing a range of salt concentrations, MS-Hu6 was found to be more stable at lower concentrations, likely due to reduced hydrophobic effects. Molecular dynamics simulations revealed a higher root-mean-square deviation with 1mM than with 100mM salt, indicating enhanced stability, as noted experimentally. Among the stabilizers tested, Tween 20 was found to yield the highest Tm and reversed the salt effect. Among several polyols/sugars, trehalose and sucrose were found to produce higher thermal stabilities. Finally, binding of recombinant human FSH to MS-Hu6 in a final formulation (20mM phosphate buffer, 1mM NaCl, 0.001% w/v Tween 20, and 260mM trehalose) resulted in a thermal shift (increase in Tm ) for the Fab, but expectedly not in the Fc domain. Given that we used a low dose of MS-Hu6 (1μM), the next challenge would be to determine whether 100-fold higher, industry-standard concentrations are equally stable.

Visible Light Induces Site-Specific Oxidative Heavy Chain Fragmentation of a Monoclonal Antibody (IgG1) Mediated by an Iron(III)-Containing Histidine Buffer

Fragmentation of therapeutic monoclonal antibodies represents a critical quality attribute. Here, we report a novel visible light-induced heavy chain fragmentation of IgG1 mediated by an Fe(III)-containing histidine (His) buffer. Based on non-reducing sodium dodecylsulfate-polyacrylamide gel electrophoresis and mass spectrometry analysis, IgG1 fragments with apparent molecular weights of ∼130, ∼110, and ∼22 kDa were detected in photo-irradiated samples and were mechanistically rationalized with an oxidative cleavage at Thr259. Specifically, the reactions are proposed to involve the generation of an intermediary alkoxyl radical, which undergoes β-cleavage to yield a glycyl radical. The latter either converts into Gly or adds oxygen and follows a peroxyl radical chemistry. The cleavage process requires the presence of His, while only negligible yields of cleavage products are formed when His is replaced by acetate, succinate, or phosphate buffer. Importantly, the fragmentation can be prevented by ethylenediaminetetraacetic acid (EDTA) only when the EDTA concentrations are in significant excess over the concentrations of Fe(III) and proteins, suggesting a strong binding between Fe(III) and IgG1.

Inhaled IgG1 antibodies: The buffering system is an important driver of stability during mesh-nebulization

In the past decade, oral inhalation has been a thriving focus of research to administer antibody directly to the lungs as an aerosol, for local treatment of respiratory diseases. Formulation of inhaled antibodies is central for the stability of antibody, lung safety and to ensure inhaler performances. Surfactants have already been shown to prevent antibody degradation during aerosolization, but little is known about the impact of other components of liquid formulations on the structural stability of antibodies. Here, we report for the first time to the best of our knowledge, a significant effect of the buffering system on monoclonal antibodies stability, during mesh-nebulization. While the monoclonal antibody extensively aggregated in citrate buffer after nebulization and required high concentration of polysorbate 80 (PS80) to maintain protein integrity, acetate and histidine buffers resulted in a slight to moderate aggregation without PS80 and low concentration of PS80 was sufficient to stabilize antibody during mesh-nebulization.

Large-Scale Freeze-Thaw of Protein Solutions: Study of the Relative Contributions of Freeze-Concentration and Ice Surface Area on Stability of Lactate Dehydrogenase

Although bulk biotherapeutics are often frozen during fill finish and shipping to improve their stability, they can undergo degradation leading to losses in biological activity during sub-optimal freeze-thaw (F/T) process. Except for a few small-scale studies, the relative contribution of various F/T stresses to the instability of proteins has not been addressed. Thus, the objective of this study was to determine the individual contributions of freeze-concentration, ice surface area, and processing time to protein destabilization at a practical manufacturing-scale. Lactate dehydrogenase (LDH) in histidine buffer solutions were frozen in 1L containers. The frozen solutions were sliced into representative samples and assessed for the ice specific surface area (SSA) and extent of solutes freeze-concentration. For the first time to our knowledge, ice SSA was measured in dried samples from large-volume protein solutions using volumetric nitrogen adsorption isotherms. SSA measurements of the freeze-dried cakes showed that the ice surface area increased with an increase in the freezing rate. The ice SSA was also impacted by the position of the sample within the container: samples closer to the active cooled surface of the container exhibited smaller ice surface area compared to ice-cored samples from the center of the bottle. The freeze-concentrate composition was determined by measuring LDH concentration in the ice-cored samples. The protein distributed more evenly throughout the frozen solution after fast freezing which also correlated with enhanced protein stability compared to slow freezing conditions. Overall, better protein stability parameters correlated with higher ice SSA and lower freeze-concentration extent which was achieved at a faster freezing rate. Thus, extended residence time of the protein at the freeze-concentrated microenvironment is the critical destabilizing factor during freezing of LDH in bulk histidine buffer system. This study expands the understanding of the relative contributions of freezing stresses which, coupled with the knowledge of cryoprotection mechanisms, is imperative to the development of optimized processes and formulations aiming stable frozen protein solutions.

Antibody apparent solubility prediction from sequence by transfer learning

SummaryDeveloping therapeutic monoclonal antibodies (mAbs) for the subcutaneous administration requires identifying mAbs with superior solubility that are amenable for high-concentration formulation. However, experimental screening is often material and labor intensive. Here, we present a strategy (named solPredict) that employs the embeddings from pretrained protein language modeling to predict the apparent solubility of mAbs in histidine (pH 6.0) buffer. A dataset of 220 diverse, in-house mAbs were used for model training and hyperparameter tuning through 5-fold cross validation. solPredict achieves high correlation with experimental solubility on an independent test set of 40 mAbs. Importantly, solPredict performs well for both IgG1 and IgG4 subclasses despite the distinct solubility behaviors. This approach eliminates the need of 3D structure modeling of mAbs, descriptor computation, and expert-crafted input features. The minimal computational expense of solPredict enables rapid, large-scale, and high-throughput screening of mAbs using sequence information alone during early antibody discovery.

Understanding the Stabilizing Effect of Histidine on mAb Aggregation: A Molecular Dynamics Study.

Histidine, a widely used buffer in monoclonal antibody (mAb) formulations, is known to reduce antibody aggregation. While experimental studies suggest a nonelectrostatic, nonstructural (relating to secondary structure preservation) origin of the phenomenon, the underlying microscopic mechanism behind the histidine action is still unknown. Understanding this mechanism will help evaluate and predict the stabilizing effect of this buffer under different experimental conditions and for different mAbs. We have used all-atom molecular dynamics simulations and contact-based free energy calculations to investigate molecular-level interactions between the histidine buffer and mAbs, which lead to the observed stability of therapeutic formulations in the presence of histidine. We reformulate the Spatial Aggregation Propensity index by including the buffer–protein interactions. The buffer adsorption on the protein surface leads to lower exposure of the hydrophobic regions to water. Our analysis indicates that the mechanism behind the stabilizing action of histidine is connected to the shielding of the solvent-exposed hydrophobic regions on the protein surface by the buffer molecules.

ANALYSIS OF POLYSORBATE 80 SOLUTION STABILITY UNDER STRESS CONDITIONS TO ENSURE ITS QUALITY AS A BIOPHARMACEUTICAL EXCIPIENT

Objective: This study aimed to investigated the effect of light, temperature, pH, peroxides, trace metals, and buffer type on the chemical stability of polysorbate 80 (PS80) obtained from the three key manufactures. Methods: We used a fast liquid chromatography-evaporative light scattering detector that allowed the monitoring of PS80 decay over time. For data analysis, we investigated the change in the peak area percentage of the compound over time. Results: At pH 6.0 in histidine buffer, PS80-B was more sensitive than PS80-A and PS80-C. The PS80 from the three different sources degraded significantly with varying performance levels when exposed to light, temperature of 40 °C, peroxides, and trace metals over time. Conclusion: Our results provide an improved understanding of the stability of PS80 obtained from the three different sources under different conditions, which provides a basis for the selection of the appropriate grade of PS80 according to the specific requirements.

Intra-Micellar and Extra-Micellar Oxidation in Phosphate and Histidine Buffers Containing Polysorbate 80

Polysorbate is a key excipient included in formulations of therapeutic proteins to help prevent aggregation and surface adsorption. The stability of both polysorbate and therapeutic proteins can be compromised by oxidative degradation. In general, polysorbate is added to formulations at concentrations above the critical micelle concentration (cmc). To date, however, few experiments have quantitatively addressed the extent of extra- and intra-micellar oxidation of polysorbate in pharmaceutically relevant buffers. This study utilizes 2,2′-azobis(2-methylpropionamidine)dihydrochloride (AAPH), a peroxyl radical-generating initiator, C11-BODIPY(581/591), a lipid peroxidation probe, and fluorescence spectroscopy to reveal that both intra- and extra-micellar oxidation proceed in pharmaceutically relevant phosphate and histidine buffers. It is further demonstrated that the relative extent of oxidation observed in the intra- and extra-micellar compartments is similar irrespective of the buffer system.