Histidine Buffer Research Articles

PH variations during diafiltration due to buffer nonidealities.

Diafiltration is used for final formulation of essentially all biotherapeutics. Several studies have demonstrated that buffer/excipient concentrations in the final diafiltered product can be different than that in the diafiltration buffer due to interactions between buffer species and the protein product. However, recent work in our lab has shown variations in solution pH that are largely independent of the protein concentration during the first few diavolumes. Our hypothesis is that these pH variations are due to nonidealities in the acid-base equilibrium coefficient. A model was developed for the diafiltration process accounting for the ionic strength dependence of the pKa . Experimental results obtained using phosphate and histidine buffers were in excellent agreement with model predictions. A decrease in ionic strength leads to an increase in the pKa for the phosphate buffer, causing a shift in the solution pH, even under conditions where the initial feed and the diafiltration buffer are at the same pH. This effect could be eliminated by matching the ionic strength of the feed and diafiltration buffer. The experimental data and model provide new insights into the factors controlling the pH profile during diafiltration processes. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1555-1560, 2017.

Ultrafiltration behavior of an Fc-fusion protein: Filtrate flux data and modeling

Fc-fusion proteins are an important new class of biotherapeutics; however, there is currently little published data on the behavior of these proteins in downstream processing operations. The objective of this study was to evaluate the ultrafiltration behavior of a highly purified Fc-fusion protein in both citrate/phosphate and histidine buffers over a wide range of protein concentrations. Filtrate flux data were obtained using a Pellicon 3 tangential flow filtration cassette. Results were analyzed using a modified version of a recently developed ultrafiltration model that accounts for the effects of intermolecular interactions on protein mass transfer, suitably extended to include the flux in the pressure-dependent regime. The key parameters in this model were evaluated from independent measurements of the solution viscosity and osmotic pressure for protein concentrations up to 200g/L. The filtrate flux and maximum achievable protein concentration in the histidine buffer were both significantly lower than the corresponding values in the citrate/phosphate buffer due primarily to the greater viscosity in the histidine buffer. The modified concentration polarization model was in good agreement with filtrate flux data over the full range of protein concentrations in both the pressure-dependent and pressure-independent regime. These results provide important insights into the factors controlling the ultrafiltration behavior of the Fc-fusion protein.

Effects of Protein Conformation, Apparent Solubility, and Protein-Protein Interactions on the Rates and Mechanisms of Aggregation for an IgG1Monoclonal Antibody.

Non-native protein aggregation is a key degradation pathway of immunoglobulins. In this work, the aggregation kinetics of an immunoglobulin gamma-1 monoclonal antibody (IgG1 mAb) in different solution environments was monitored over a range of incubation temperatures for up to seven months using size exclusion chromatography. Histidine and citrate buffers with/without sodium chloride were employed to modulate the mAb's conformational stability, solubility (in the presence of polyethylene glycol, PEG), and protein-protein interactions as measured by differential scanning calorimetry, PEG precipitation, and static light scattering, respectively. The effect of these parameters on the mechanism(s) of mAb aggregation during storage at different temperatures was determined using kinetic models, which were used to fit aggregation data to determine rate constants for aggregate nucleation and growth processes. This approach was used to investigate the effects of colloidal protein-protein interactions and solubility values (in PEG solutions) on the mechanisms and rates of IgG1 mAb aggregation as a function of temperature-induced structural perturbations. Aggregate nucleation and growth pathways for this IgG1 mAb were sensitive to temperature and overall conformational stability. Aggregate growth, on the other hand, was also sensitive to conditions affecting the solubility of the mAb, particularly at elevated temperatures.

Preparation of Concentrated Chitosan/DNA Nanoparticle Formulations by Lyophilization for Gene Delivery at Clinically Relevant Dosages

Chitosan/DNA polyplexes have been optimized for efficient and safe in vitro and in vivo gene delivery. Clinical application of this technology requires the development of formulations with higher concentrations to reach therapeutic dosages. Polyplexes were prepared using chitosan and EGFPLuc plasmids. Freeze-thawing and freeze-drying studies were performed to identify and optimize lyoprotectant and buffer contents in formulations. Freeze-dried samples were rehydrated in reduced volumes to increase their final DNA dose. Nanoparticle physicochemical properties were analyzed, and their transfection efficiency and cytotoxicity were measured in human embryonic kidney 293 cells. Data showed that 3.5 mM histidine buffer (pH 6.5) combined with one of 0.5% wt/vol sucrose, dextran 5 kDa, or trehalose was required to prevent polyplex aggregation during freeze-drying. Optimal formulations could be concentrated 20-fold, to a clinically desired ∼1 mg of DNA/mL, while maintaining near physiological pH and tonicity. Polyplexes were predominantly spherical, with diameters below 200 nm, polydispersity indexes below 0.32, and zeta potentials above +19 mV. Rehydrated formulations had transfection efficiencies no less than 65% of fresh polyplexes without excipients and had no effect on viability and metabolic activity of human embryonic kidney 293 cells. These concentrated formulations represent an important step toward clinical use of chitosan-based gene delivery systems.

Resolving Transferrin Isoforms via Agarose Gel Electrophoresis.

Cerebrospinal fluid (CSF) leaks may present as rhinorrhea or otorrhea and can lead to life-threatening complications if not detected. The usefulness of the morpholinopropanesulfonic acid (MOPS)-histidine buffer in detecting β₂-transferrin, which is only found in the cerebrospinal fluid, was compared with the standard barbital buffer. We evaluated 20 aural or nasal patient specimens submitted for CSF testing via agarose electrophoresis with barbital and MOPS-histidine buffers. The MOPS-histidine and barbital buffers revealed 5 transferrin bands and 2 transferrin bands with CSF, respectively. Seventeen of 20 patient specimens had concordant results. The 3 discrepant specimens initially tested negative with the barbital buffer and positive with the MOPS-histidine buffer. Two of the 3 patient specimens later tested positive with the barbital buffer when a new specimen was submitted. Agarose electrophoresis with the MOPS-histidine buffer increases the resolution of transferrin isoforms.

Evidence against a bacterial endotoxin masking effect in biologic drug products by limulus amebocyte lysate detection.

Bacterial endotoxin is a Gram-negative bacterial cell wall component that is harmful to humans at threshold concentrations, and it is not expected to be in aseptically-produced pharmaceutical medicines. It has been suggested that endotoxin cannot be detected over time in certain biopharmaceutical drug product formulations containing citrate, phosphate, and polysorbate components via an unknown masking mechanism. We have generated and present data here that indicate that endotoxin can be recovered in a variety of matrices, and under various experimental conditions.

Evaluation of protein formulation and its viscosity with DSC, DLS, and microviscometer

The viscosity of highly concentrated protein solutions was evaluated using lysozyme as model protein. Viscosity profiles of lysozyme were examined with the effect of buffer and pH-value at various concentrations. The viscosity of lysozyme dissolved in water increased continuously with the concentration as the slope of shear stress against shear rate increased with the concentration. In addition, the viscosity of lysozyme was higher in histidine buffer than in acetate buffer at selected pH ranges. The effect of various excipient concentrations was also investigated in means of unfolding transition temperature (Tm), viscosity, hydrodynamic size and zeta potential by using differential scanning calorimetry (DSC), microviscometer and dynamic light scattering (DLS). The selected excipients except surfactants increased the viscosity of protein solution with their concentration. Carbohydrates increased the viscosity relatively higher than amino acids and also they increased the conformational stability (Tm) by enhancing the protein molecule more in compact form. Also amino acids increased the viscosity but decreased the conformational stability since they seemed to be only dispersed in the solution avoiding protein–protein interactions, resulting in a decrease of zeta potential. Consequently, the applied methods—DSC, DLS and microviscometer demonstrated the potential to develop a highly concentrated protein formulation to decrease the high viscosity effect with acceptable conformational stability.

Fundamental analysis of recombinant human epidermal growth factor in solution with biophysical methods

Correlation of thermodynamic and secondary structural stability of proteins at various buffer pHs was investigated using differential scanning calorimetry (DSC), dynamic light scattering (DLS) and attenuated total reflection Fourier-transform infrared spectroscopy (ATR FT-IR). Recombinant human epithelial growth factor (rhEGF) was selected as a model protein at various pHs and in different buffers, including phosphate, histidine, citrate, HEPES and Tris. Particle size and zeta potential of rhEGF at each selected pH of buffer were observed by DLS. Four factors were used to characterize the biophysical stability of rhEGF in solution: temperature at maximum heat flux (Tm), intermolecular β-sheet contents, zeta size and zeta potential. It was possible to predict the apparent isoelectric point (pI) of rhEGF as 4.43 by plotting pH against zeta potential. When the pH of the rhEGF solution increased or decreased from pI, the absolute zeta potential increased indicating a reduced possibility of protein aggregation, since Tm increased and β-sheet contents decreased. The contents of induced intermolecular β-sheet in Tris and HEPES buffers were the lowest. Thermodynamic stability of rhEGF markedly increased when pH is higher than 6.2 in histidine buffer where Tm of first transition was all above 70 °C. Moreover, rhEGF in Tris buffer was more thermodynamically stable than in HEPES with higher zeta potential. Tris buffer at pH 7.2 was concluded to be the most favorable.

Preparation and physicochemical properties of Nicotinamide@AlOOH biocompatible composite based on sol-gel materials

This paper is devoted to studying the properties of the functional nanocomposite nicotinamide@boehmite. Nicotinamide is introduced directly into a sol of boehmite with the subsequent aging and drying. The results of obtaining high-purity boehmite sol prepared with the use of ultrasonic machining as a physical method of peptization are presented. The structure of the composite is studied with the help of a complex of methods: X-ray-phase analysis, IR-spectroscopy, electron microscopy, and the low-temperature adsorption-desorption of nitrogen. The release of nicotinamide is studied in a histidine buffer at pH = 7.4. Forty-eight percent of the introduced nicotinamide is released in the first 2 h with subsequent sharp retardation resulting in a complete release for a long time.

Aluminum elution and precipitation in glass vials: effect of pH and buffer species

Inorganic extractables from glass vials may cause particle formation in the drug solution. In this study, the ability of eluting Al ion from borosilicate glass vials, and tendencies of precipitation containing Al were investigated using various pHs of phosphate, citrate, acetate and histidine buffer. Through heating, all of the buffers showed that Si and Al were eluted from glass vials in ratios almost the same as the composition of borosilicate glass, and the amounts of Al and Si from various buffer solutions at pH 7 were in the following order: citrate > phosphate > acetate > histidine. In addition, during storage after heating, the Al concentration at certain pHs of phosphate and acetate buffer solution decreased, suggesting the formation of particles containing Al. In citrate buffer, Al did not decrease in spite of the high elution amount. Considering that the solubility profile of aluminum oxide and the Al eluting profile of borosilicate glass were different, it is speculated that Al ion may be forced to leach into the buffer solution according to Si elution on the surface of glass vials. When Al ions were added to the buffer solutions, phosphate, acetate and histidine buffer showed a decrease of Al concentration during storage at a neutral range of pHs, indicating the formation of particles containing Al. In conclusion, it is suggested that phosphate buffer solution has higher possibility of forming particles containing Al than other buffer solutions.

Method qualification and application of diffusion interaction parameter and virial coefficient

This research focused on evaluation and application of two methods in studying weak protein–protein interactions, i.e. diffusion interaction parameter (KD) and second virial coefficient (B22), both of which are first-order coefficients of protein interactions. Although the plate-based KD method successfully distinguished KD values with relatively large difference in a pH ranging study, it failed to make a consistent statistical decision to determine close interactions as shown by the comprehensive ANOVA analysis. We also validated the DLS-based B22 method by using a model protein lysozyme. The dramatic change of solution appearance for lysozyme as a function of NaCl concentration highlighted the importance of B22 in understanding protein interactions. Moreover, B22 measurement for a MAb fragment suggested a more repulsive protein interaction in histidine buffer than in citrate buffer. The coefficient of variation was <10% when B22 was on an order of magnitude of 10−4Lmmol/g2 in contrast to >30% when it approached 10−5Lmmol/g2. In this research, we also made an attempt to study protein–protein interactions in concentrated MAb fragment solutions (e.g. >50mg/mL). Our data suggested that such interactions could be empirically modeled by high-order virial expansions.

Insulin-like growth factor-I aerosol formulations for pulmonary delivery

Injectable insulin-like growth factor-1 (IGF-I) is therapeutically deployed for severe IGF-I deficiency and clinically explored for various other indications such as muscle wasting disease. In the present study, liquid IGF-I formulations for pulmonal application were screened with regard to buffer type (acetate, citrate, histidine, and succinate), sodium chloride concentration (50–150mM), and pH value (4.5–6.5). Methionine 59 oxidation (Met(o)) was observed in acetate buffer along with reducible dimer and trimer formation at low pH. Oxidation correlated with formation of covalent, reducible aggregates, and complete loss of potency was observed for severely aggregated samples. Bioactivity was partly retained in cases where complete oxidation but limited aggregation was found. In contrast, IGF-I integrity was preserved in histidine buffer during accelerated stability. After delivery from air-jet or vibrating-mesh nebulizers, limited Met(o) formation and no aggregation was observed. Nebulization performance regarding aerosol output rate, mass median aerodynamic diameter, and fine particle fraction for liquid IGF-I formulation was comparable to 0.9% sodium chloride reference, confirming the suitability for pulmonal application. In conclusion, different IGF-I liquid formulations were studied and compositions were identified maintaining bioactivity and chemical stability throughout storage at accelerated conditions for up to 4months as well as compatibility with air-jet and vibrating-mesh nebulizers.

Screening for stability and compatibility conditions of recombinant human epidermal growth factor for parenteral formulation: Effect of pH, buffers, and excipients

A successful parenteral formulation can be developed by studying stability and compatibility of biopharmaceuticals as a function of solution composition. Here, we evaluate the influence of pH, buffers, ionic strength, protein concentration and presence of excipients on recombinant human epidermal growth factor (rhEGF) stability. The stability was accessed by reversed-phase high performance liquid chromatography (RP-HPLC), size exclusion chromatography (SEC-HPLC), enzyme-linked immunosorbent assay (ELISA), Far-UV circular dichroism (CD) and light scattering. The overall maximal stability was obtained in pH near to 7.0 in phosphate, Tris and histidine buffers as the results of the different methods revealed. The CD results revealed that this protein is stable in an extensive pH range. Aggregation of rhEGF was minimized at pH values ranged from 6.0 to 8.0 as indicated the SEC-HPLC and light scattering results. Nor the ionic strength neither the rhEGF concentration had significant effect on the reaction rate constants. Most rhEGF-excipient instability occurs among this protein and reducing sugars. Polymers like poly(ethylene glycol) (PEG) and polysorbates increased methionine oxidation. The rhEGF oxidation and deamidation were the most common degradation pathways. This research identified critical solution factors to be considered for the development of a successful rhEGF parenteral formulation.

Investigation of Histidine Stabilizing Effects on LDH During Freeze-Drying

The objective of this study was to investigate the effect of histidine on the stability of the model protein lactate dehydrogenase (LDH) during freeze-drying. Several parameters were varied including pH of the bulk solution, histidine concentration, and performance of an annealing step during freezing. First, histidine was used as a buffer in the protein formulations and compared with "conventional" potassium phosphate and citrate buffer systems. For this purpose, sucrose or mannitol was used as stabilizers. Second, the possibility of using histidine as both buffer and stabilizer (cryoprotectant and lyoprotectant) in the protein formulations was evaluated with focus on protein stability and the physical state of histidine in the final product, in addition to cake elegance. Protein stability was evaluated both functionally by measuring the activity recovery of the model protein LDH after freeze-drying and structurally by analyzing the protein secondary structure. LDH showed improved stability in histidine buffer in comparison with other buffers. Protein stability and the tendency of histidine to crystallize during freeze-drying were pH dependent. Annealing destabilized LDH and resulted in a decrease of the activity recovery. However, the extent of protein destabilization caused by annealing appears to be also pH dependent.

Buffer capacity of biologics—from buffer salts to buffering by antibodies

Controlling pH is essential for a variety of biopharmaceutical process steps. The chemical stability of biologics such as monoclonal antibodies is pH-dependent and slightly acidic conditions are favorable for stability in a number of cases. Since control of pH is widely provided by added buffer salts, the current study summarizes the buffer characteristics of acetate, citrate, histidine, succinate, and phosphate buffers. Experimentally derived values largely coincide with values calculated from a model that had been proposed in 1922 by van Slyke. As high concentrated protein formulations become more and more prevalent for biologics, the self-buffering potential of proteins becomes of relevance. The current study provides information on buffer characteristics for pH ranges down to 4.0 and up to 8.0 and shows that a monoclonal antibody at 50 mg/mL exhibits similar buffer capacity as 6 mM citrate or 14 mM histidine (pH 5.0-6.0). Buffer capacity of antibody solutions scales linearly with protein concentration up to more than 200 mg/mL. At a protein concentration of 220 mg/mL, the buffer capacity resembles the buffer capacity of 30 mM citrate or 50 mM histidine (pH 5.0-6.0). The buffer capacity of monoclonal antibodies is practically identical at the process relevant temperatures 5, 25, and 40°C. Changes in ionic strength of ΔI=0.15, in contrast, can alter the buffer capacity up to 35%. In conclusion, due to efficient self-buffering by antibodies in the pH range of favored chemical stability, conventional buffer excipients could be dispensable for pH stabilization of high concentrated protein solutions.

Gender-dependent Metabolic Remodeling During Heart Preservation in Cardioplegic Celsior and Histidine Buffer Solution

Understanding heart metabolism during preservation is crucial to develop new effective cardioplegic solutions. We aim to investigate metabolic alterations during heart preservation in the clinically used Celsior (Cs) and histidine buffer solution (HBS). We also focused in gender-specific metabolic adaptations during ischemia. We followed energy metabolism in hearts from males and females preserved during 6 hours in Cs and HBS. Hearts were subjected to cold ischemia (4°C) in Cs or HBS, and aliquots of the cardioplegic solution were collected throughout preservation for nuclear magnetic resonance analysis. HBS-preserved hearts from males consumed glucose mostly between 240 and 360 minutes, whereas HBS-preserved hearts from females consumed glucose throughout the 6 hours of ischemia. Lactate production rates followed approximately the glucose consumption rates in HBS-preserved hearts. The lactate to alanine ratio, an indicator of the redox state, was increased in HBS-preserved hearts when compared with Cs-preserved hearts. Hearts from males presented a higher redox state than those from females preserved in Cs after 300 minutes. Both Cs and HBS were capable of preventing acidification in hearts from females but not in hearts from males, which decreased the extracellular pH. HBS-preserved hearts from males and females produced 0.1 ± 0.01 and 0.15 ± 0.03 μmol·min·gdw of lactate, respectively. Those rates were significantly higher than in Cs-preserved hearts. Thus, Cs was more effective in preventing lactate production. We conclude that glycolysis and lactate production are stimulated in HBS-preserved hearts. HBS shows better overall results particularly in hearts from females, which presented less extracellular acidification and were more effective in recycling the metabolic subproducts.

Gender-dependent Metabolic Remodeling During Heart Preservation in Cardioplegic Celsior and Histidine Buffer Solution

Gender-dependent Metabolic Remodeling During Heart Preservation in Cardioplegic Celsior and Histidine Buffer Solution

Photosensitizers Form in Histidine Buffer and Mediate the Photodegradation of a Monoclonal Antibody

Fluorescent light (FL) photodegradation of a monoclonal antibody (mAb) formulated in histidine buffer is mediated by histidine-derived photosensitizers that accumulate and greatly increase with light exposure. Histidine-derived photosensitizers are the primary mediators of Trp photooxidation. FL-photodegradation requires light exposure and is pH dependent. It is significantly reduced or eliminated by buffer exchanges, by oxygen depletion, or at pH values greater than 7. Antibody-fragment MS ion counts reveal that oxidation of a single light chain Trp in CDR1 correlates with binding loss. Multiple heavy chain methionines oxidize, but poorly correlate with binding loss. Photosensitizers extracted from photo-aged histidine buffer are potent mediators of FL-photodegradation including oxidation and, to a lesser degree, fragmentation and aggregation of the mAb. These photosensitizers absorb visible light and have neutral mass of 187.1- 386.1 Da. They are also fluorescent with ex/em at 360/450 nm. When spiked into histidine or MES buffered mAb formulations they produce a concentration dependent and pronounced increase in FL-photodegradation; however, no oxidation or loss of antibody function occurs in the dark and hydrogen peroxide does not oxidize Trp. The major component is consistent with histidine oxidation to 6a-hydroxy-2-oxo-octahydro-pyrollo[2,3-d]imidazole-5-carboxylic acid. Photosensitizer levels measured in the formulation prior to light exposure, are linearly related to the FL-photodegradation observed and can predict degradation in photostability testing.

Anti-apoptotic protection afforded by cardioplegic celsior and histidine buffer solutions to hearts subjected to ischemia and ischemia/reperfusion

Cardiomyocytes undergo apoptosis in response to ischemia and ischemia/reperfusion (I/R). During heart preservation, inhibition of apoptosis is critical to avoid organ failure. We aimed to compare the protection afforded by Celsior (Cs) and Histidine buffer solution (HBS) against apoptotic signaling in hearts subjected to moderate (4 h) versus severe (6 h) ischemia alone or followed by 30 min reperfusion. The impact of gender on cardioplegic protection was also explored. Hearts from male and female Wistar-Han rats were divided by gender in distinct groups: control, perfusion_control, ischemia, and I/R. Ischemia and I/R groups were divided in subgroups Cs or HBS, and subjected to 4 or 6 h ischemia alone or followed by reperfusion. Proteins involved in apoptotic signaling (p53, Bax, Fas, FasL, and Flip) were quantified by Western blot in mitochondria and/or whole tissue. Caspases 3, 8, and 9-like activities were measured and hemodynamic parameters were monitored. Ischemia activated p53/Bax signaling. After I/R, HBS-preserved hearts had lower p53/Bax content in mitochondrial fractions than Cs-preserved hearts. The p53/Bax decrease in tissue samples was mostly observed in females. Caspase 3-like activity was increased in HBS-preserved male hearts. The heart rate was decreased in Cs and HBS-preserved hearts. Fas protein levels remained unaltered in all conditions but soluble FasL increased from 4 to 6 h preservation in Cs and HBS. Hearts from male rats were more prone to apoptosis and myocardial dysfunction. HBS and Cs were not effective in inhibiting apoptotic signaling although HBS presented best overall results. Both solutions should be improved to prevent apoptosis and myocardial dysfunction after I/R.

Studies of Histidine As a Suitable Isoelectric Buffer for Tryptic Digestion and Isoelectric Trapping Fractionation Followed by Capillary Electrophoresis–Mass Spectrometry for Proteomic Analysis

The use of histidine as a protein digestion buffer followed by isoelectric trapping separations using "membrane separated wells for isoelectric focusing and trapping" (MSWIFT) and mass spectrometry (MS) analysis is described. Tryptic digestion of bovine serum albumin (BSA) performed in histidine buffered solutions yields similar amino acid sequence coverage values to those obtained using ammonium bicarbonate buffer. Time course studies suggest that histidine buffers provide faster migration of peptides from the loading compartment compared to digestions prepared in ammonium bicarbonate due to differences in conductivities of the two buffers. In addition, this sample preparation method and MSWIFT separations have been coupled with capillary electrophoresis (CE) and matrix-assisted laser desorption ionization-mass spectrometry (MALDI-MS) as an alternative separation approach for proteomic studies. Tryptic peptides of ribosomal proteins in histidine are fractionated using MSWIFT followed by CE-MALDI-MS, which further illustrates the ability to couple fractions from a pI based separation device to CE-MS. Specifically, two-dimensional CE-MS plots provide a direct correlation between the numbers of basic residues within the peptide sequence displayed in charge-state trend lines. Combining MSWIFT and CE-MS provides added information regarding peptide sequence, specifically pI and in-solution charge state. Post-translational modifications can also be identified using this method.