Hip Geometry Research Articles

Longitudinal changes in hip geometry in relation to the final menstrual period: Study of Women's Health Across the Nation (SWAN).

In SWAN, we showed that accelerated loss of bone mineral density (BMD) begins 1 year before the final menstrual period (FMP) to 2 years after the FMP and slows thereafter. However, the risk of fracture depends on both BMD and bone geometry. The hip structural analysis (HSA) measures important geometric properties of bone. Changes in HSA parameters across the menopausal transition have not been previously assessed. The current analysis uses data from SWAN, 5 years before to 5 years after FMP (N = 900, Age (mean(SD)) = 46.85(2.60), 44% White). HSA parameters at the femoral narrow neck were obtained from 2D DXA scans and normalized to baseline values. FMP was determined from annual interviews. Changes in HSA were assessed over 3 periods, 5 to 2 years before FMP (pre-transmenopausal), 2 years before to 1 years after FMP (transmenopausal), 1 to 5 years after FMP (postmenopausal). Mixed linear models with random slopes were used to estimate the rate of change in HSA parameters relative to FMP. Loss of BMD, cross-sectional area (CSA), and section modulus (SM) and increases in outer diameter (OD) were greatest in the transmenopausal period (p for all<0.05). Changes continued in the postmenopausal period but were not statistically significant. The cumulative percentage changes over 10 years in BMD (-10.67%), CSA (-9.01), SM (-7.03) and OD (+1.95) were statistically significant. Changes in hip geometry across the menopause transition parallel changes in BMD and provide insight into mechanisms that may increase risk of fragility fracture.

Using statistical shape modelling of DXA images to quantify the shape of the proximal femur at ages 14 and 18 years in the Avon Longitudinal Study of Parents and Children

Hip shape is an important determinant of hip osteoarthritis and osteoporotic hip fracture; however, little is known about its development in childhood and adolescence. While previous studies largely focused on individual geometrical indices of hip geometry such as neck-shaft angle or femoral neck width, statistical shape modelling offers the means to quantify the entire contour of the proximal femur, including lesser trochanter and acetabular eyebrow. We describe the derivation of independent modes of variation (hip shape mode scores) to characterise variation in hip shape from dual-energy X-ray absorptiometry (DXA) images in the Avon Longitudinal Study of Parents and Children (ALSPAC) offspring, using statistical shape modelling. ALSPAC is a rich source of phenotypic and genotypic data which provides a unique opportunity to investigate the environmental and genetic influences on hip shape in adolescence, as well as comparison with adult hip shape.

The Association of Variations in Hip and Pelvic Geometry With Pregnancy-Related Sacroiliac Joint Pain Based on a Longitudinal Analysis.

Cross-sectional study using radiological measurements and longitudinal data analysis. We aim to explore hip/pelvic geometry on anteroposterior radiographs and examine if such parameters are associated with clinical symptoms. Pregnancy-related sacroiliac joint pain is a common disease and is responsible to the disability of daily activities. The etiology is likely to be correlated with the biomechanical factors which are determined by trunk load and hip/pelvic geometry. Previous studies have already found the association between symptoms and weight increase during pregnancy. However, the relationship between bony anatomy and pregnancy-related sacroiliac joint pain remains unknown. In total, 72 women were included in the final analysis. In pregnant women with self-reported sacroiliac joint pain, pain scores at 12, 24, 30, and 36 weeks of pregnancy were recorded and included in a mixed-effect linear regression model as dependent variables. The radiological measurements were included as independent variables. Furthermore, to investigate the relationship between hip/pelvic geometry and the activity-specific nociceptive phenomenon, the radiological measurements between patients with and without activity-induced pain were compared using a binominal logistic regression model. The relative bilateral is chial tuberosity distance (betta coefficient: 0.078; P = 0.015) and the relative bilateral femoral head length (betta coefficient: 0.011; P = 0.028) showed significant interactions with the slope of pain scores. Moreover, women whose pain exacerbate during prolonged walking had a higher odds in hip/pelvic geometry of the bilateral ischial tuberosity distance (odds ratio [OR]: 1.12; P = 0.050) and the bilateral femoral head length (OR: 1.16; P = 0.076) with approximately significant P-value. These data indicate hip/pelvic anatomical variations are associated with the degree of pain increasing and the activity-specific pain during pregnancy, which may help to have further understanding on the biomechanical factor in developing pregnancy-related sacroiliac joint pain. 3.

Lean mass and lower limb muscle function in relation to hip strength, geometry and fracture risk indices in community-dwelling older women.

SummaryIn a population-based sample of British women aged over 70 years old, lean mass and peak lower limb muscle force were both independently associated with hip strength and fracture risk indices, thereby suggesting a potential benefit of promoting leg muscle strengthening exercise for the prevention of hip fractures in postmenopausal women.IntroductionTo investigate cross-sectional associations of lean mass and physical performance, including lower limb muscle function, with hip strength, geometry and fracture risk indices (FRIs) in postmenopausal women.MethodsData were from the Cohort of Skeletal Health in Bristol and Avon. Total hip (TH) and femoral neck (FN) bone mineral density (BMD), hip geometry and total body lean mass (TBLM) were assessed by dual x-ray absorptiometry (DXA). Finite element analysis of hip DXA was used to derive FN, intertrochanteric and subtrochanteric FRIs. Grip strength, gait speed and chair rise time were measured objectively. Lower limb peak muscle force and muscle power were assessed by jumping mechanography.ResultsIn total, 241 women were included (age = 76.4; SD = 2.6 years). After adjustment for age, height, weight/fat mass and comorbidities, TBLM was positively associated with hip BMD (βTH BMD = 0.36, P ≤ 0.001; βFN BMD = 0.26, P = 0.01) and cross-section moment of inertia (0.24, P ≤ 0.001) and inversely associated with FN FRI (− 0.21, P = 0.03) and intertrochanteric FRI (− 0.11, P = 0.05) (estimates represent SD difference in bone measures per SD difference in TBLM). Lower limb peak muscle force was positively associated with hip BMD (βTH BMD = 0.28, P ≤ 0.001; βFN BMD = 0.23, P = 0.008) and inversely associated with FN FRI (− 0.17, P = 0.04) and subtrochanteric FRI (− 0.18, P = 0.04). Associations of grip strength, gait speed, chair rise time and peak muscle power with hip parameters were close to the null.ConclusionsLean mass and lower limb peak muscle force were associated with hip BMD and geometrical FRIs in postmenopausal women. Leg muscle strengthening exercises may therefore help prevent hip fractures in older women.

Longitudinal determinants of 12-month changes on bone health in adolescent male athletes

SummaryWe identified the determinants of 12-month changes of areal bone mineral density (aBMD), hip geometry and trabecular bone score (TBS) in adolescent male athletes. Changes in region-specific lean mass and the type of sport are the most consistent determinants in this population.PurposeThis study aims to identify the determinants of 12-month changes of areal bone mineral density (aBMD), hip geometry and trabecular bone score (TBS) in adolescent male athletes.MethodsThe sample was 104 adolescent males aged 12–14 years at baseline that were followed over 12 months: 39 swimmers, 37 footballers (or soccer players) and 28 cyclists. Dual-energy X-ray absorptiometry measured aBMD at the whole body, lumbar spine and dual hip. Hip geometry estimates at the femoral neck were measured using hip structural analysis. Lumbar spine texture was measured by TBS.ResultsMultivariate regression models significantly explained 38–60% of the variance in the aBMD changes, 36–62% in the hip geometry estimates changes and 45% in the TBS changes. Δregion-specific lean mass was the most consistent predictor of changes in aBMD outcomes (β = 0.591 to 0.696), followed by cycling participation (β = − 0.233 to − 0.262), swimming participation (β = − 0.315 to − 0.336) and ΔMVPA (β = 0.165). Cycling participation was the most consistent predictor of changes in hip geometry estimates (β = − 0.174 to − 0.268), followed by Δregion-specific lean mass (β = 0.587) and Δcardiorespiratory fitness (β = 0.253). Finally, cycling and swimming participation (β = − 0.347 to − 0.453), Δregion-specific lean mass (β = 0.848) and Δstature (β = 0.720) were predictors of change in TBS.ConclusionsChanges in region-specific lean mass and the type of sport are the most consistent determinants of 12-month changes in aBMD, hip geometry estimates and TBS in adolescent male athletes.Trial registrationISRCTN17982776

Effect of 3 year Denosumab Treatment on Hip Structure in Japanese Postmenopausal Women and Men with Osteoporosis

Introduction Denosumab inhibits bone resorption by binding to and inactivating RANK ligand (RANKL), a key mediator of osteoclast formation, maturation and activation. As in the pivotal phase 3 study, FREEDOM, in predominantly postmenopausal Caucasian women with osteoporosis the efficacy of denosumab was evaluated by the phase 3 study, DIRECT, in Japanese osteoporosis patients. The study showed that 2-year treatment of denosumab significantly reduced risk of new vertebral fracture by 74.0% compared to placebo. However, there have been no data showing actions on Japanese bone architecture. Objectives Here we evaluate the effect of denosumab to hip geometry by hip structural analysis using dual-energy X-ray absorptiometry (DXA) data in Japanese. Methods The images for 687 patients derived from DIRECT study were evaluable for HSA. DIRECT study consisted of a 2-year randomized, double-blind, placebo-controlled phase and a 1-year open-label extension phase, in which all subjects received denosumab. Hip geometry was analyzed using Hologic Apex DXA software version 13.5 (Madison, WI). Measurements include: BMD as average pixel value in the profile, bone outer diameter, endocortical diameter, mineralized bone cross-sectional area, average cortical thickness, cross-sectional moment of inertia (CSMI) as BMD times square of the distance from the center of mass, section modulus as CSMI divided by Dmax (maximum distance between the center of the mass and the outer cortex), buckling ratio as the ratio of bone diameter to average cortical thickness, and Dmax. Percent changes from baseline in HSA parameters at each time point were analyzed using one-sample t-test. Comparisons between the treatment groups for the percent changes in HSA parameters at each time point were performed using a two-sample t-test. Results The images for 687 patients applicable to HSA were used in the present study. The baseline characteristics were similar to those in the total 952 participants. Compared to placebo, denosumab significantly increased BMD, cortical thickness and cross sectional area in all of the three analyzed areas: the narrow neck, intertrochanter and femoral shaft. The subsequent derived mechanical parameters, cross-sectional moment of inertia, section modulus and buckling ratio, were also improved by denosumab. In addition, the improvement of these parameters was also observed in the patients that had switched from placebo to denosumab treatment. Conclusions The present study reveals 3-year effect of denosumab on the geometrical parameters of hip bone structure. The improving effects suggest underlying mechanism for anti-fracture effect of denosumab in Japanese.

Physical Performance Variables and Bone Parameters in a Group of Young Overweight and Obese Women

The aim of this study was to explore the relationships between physical performance variables and bone parameters such as bone mineral density (BMD), bone mineral content, hip geometry indices, and trabecular bone score in a group of young overweight and obese adult women. Sixty-eight overweight/obese (body mass index ≥25 kg/m2; 25.5–42.4 kg/m2) young women whose ages range from 18 to 35 yr participated in this study. Body composition and bone outcomes were measured by dual-energy X-ray absorptiometry. Maximum oxygen consumption (VO2 max, in liter per minute) was determined indirectly using a progressive shuttle run test. One-repetition-maximum half-squat was directly measured. Vertical jump was measured and maximum power (P max) of the lower limbs was calculated. Lean mass was positively correlated to whole body (WB) BMD, total hip BMD, femoral neck (FN) BMD, femoral neck cross-sectional area (FN CSA) and femoral neck cross sectional moment of inertia (FN CSMI) (p < 0.05). VO2 max (in liter per minute) and muscle power were positively correlated to WB BMD, total hip BMD, FN BMD, FN CSA, and FN CSMI (p < 0.05). One-repetition-maximum half-squat was positively correlated with lumbar spine trabecular bone score, WB BMD, FN BMD, FN CSA and FN CSMI (p < 0.05). This study suggests that lean mass, vertical jump, VO2 max (liter per minute), muscle power and one-repetition-maximum half squat are positive determinants of BMD and hip geometry indices in young overweight and obese women.

Age and sex effects on the relationship between body composition and hip geometric structure in males and females from East China.

The aim of this study was to examine whether the correlation between body composition including bone mineral density (BMD), lean mass (LM) and fat mass (FM), and hip geometric structure change with aging in males and females from East China. It was a cross-section study. A total of 1168 healthy male and 1066 healthy females in Shanghai were divided into six groups based on their age and sex. All participants were evaluated by assessing the BMD of lumber spine and proximal hip, total LM, total FM, and geometric parameters of the hip such as the cross-sectional area (CSA), average cortical thickness (ACT), and the buckling ratio (BR) at the narrow neck (NN), the intertrochanter (IT), and the shaft (FS). Among the three body composition, the correlation between hip BMD and hip geometric structure was strongest. LM showed significantly positive correlations with CSA. FM showed negative or little positive correlation with hip geometry in the young group. However, the degree of the contribution of FM to hip geometric structure became substantially positive with aging. Limb LM produced the largest positive contribution to CSA and ACT at all three regions in young males. However, in older males the trunk LM produced the largest positive contribution to CSA and ACT. Among all body composition parameters, hip BMD showed the largest correlation with hip geometric structure, with LM showing the second largest. The impact of FM and LM on hip geometry changed with aging and with different distributions of lean mass and fat mass.

Trabecular Bone Score and Hip Structural Analysis in Patients With Atypical Femur Fractures

Bisphosphonate use has declined dramatically in recent years, partly because of fear of rare side effects like atypical femur fractures (AFFs). It is therefore desirable to have a diagnostic method to identify those at risk of AFF to prevent this serious complication. We compared trabecular microarchitecture and hip geometry between 30 patients with AFF and 141 controls of similar age and sex, using bisphosphonates. Trabecular bone score (TBS) and hip structural analysis (HSA) were used to assess trabecular microarchitecture and macroscopic hip geometry from dual-energy X-ray absorptiometry images of the lumbar spine and hip, respectively. General characteristics, TBS, and HSA were compared between patients with AFF and controls using Student's t tests and chi-square statistics. Associations between AFF and TBS and femur geometric characteristics by HSA were adjusted for sex, age, height, weight, ethnicity, duration of bisphosphonate use, and glucocorticoid use. Additionally, the analysis of TBS was adjusted for lumbar spine bone mineral density and the time difference between dual-energy X-ray absorptiometry scanning and the diagnosis of AFF. Patients with AFF had significantly higher body mass index than controls, had used bisphosphonates longer, and glucocorticoids and proton pump inhibitors more frequently. Sex-specific T-score was significantly higher in patients with AFF at the lumbar spine (p = 0.004), but not at the femoral neck (p = 0.190) after adjustment for age, height, and weight. TBS did not differ significantly between patients with AFF and controls. Neither neck shaft angle nor any geometric variables at the femoral shaft measured by HSA differed between patients with AFF and controls. At the narrow neck, patients with AFF had lower buckling ratio and higher centroid position, consistent with a lower risk of classical fragility hip fractures. The findings at narrow neck and higher bone mineral density might be explained by the fact that the majority of patients with AFF used bisphosphonates to prevent glucocorticoid-induced osteoporosis. Based on our results, TBS and HSA do not appear to have value in detecting patients at risk of AFF.

Muscular Maximal Strength Indices and Bone Variables in a Group of Elderly Women

The aim of the present study was to explore the relations between muscular maximal strength indices and bone parameters (bone mineral density [BMD], hip geometry indices, and trabecular bone score [TBS]) in a group of elderly women. This study included 35 healthy elderly women whose ages range between 65 and 75 yr (68.1 ± 3.1 yr). BMD (in gram per square centimeter) was determined for each individual by dual-energy X-ray absorptiometry at the whole body, lumbar spine (L1–L4), total hip (TH), and femoral neck (FN). L1–L4 TBS and hip geometry indices were also evaluated by dual-energy X-ray absorptiometry. Maximal muscle strength of bench press (1-repetition maximum [RM] bench press), maximal muscle strength of leg press (1-RM leg press), and handgrip were measured using validated methods. 1-RM bench press was positively correlated to TH BMD (r = 0.40; p < 0.05), FN BMD (r = 0.41; p < 0.05), FN section modulus (r = 0.33; p < 0.05), and FN cross-sectional moment of inertia (r = 0.35; p < 0.05). 1-RM leg press was positively correlated to TH BMD (r = 0.50; p < 0.01), FN BMD (r = 0.35; p < 0.05), FN cross-sectional area (r = 0.38; p < 0.05), and TBS (r = 0.37; p < 0.05). Handgrip was correlated only to FN cross-sectional moment of inertia (r = 0.43; p < 0.01). This study suggests that 1-RM bench press and 1-RM leg press are positive determinants of BMD in elderly women.

The potential role of variations in juvenile hip geometry on the development of Legg-Calvé-Perthes disease: a biomechanical investigation

Legg-Calvé-Perthes disease (LCP) is one of the most poorly understood diseases in paediatric orthopaedics. One common trait of LCP is the marked morphological difference between healthy and pathological hips, early deviations of which (i.e. prior to disease onset) have been suggested to lead to the overload and collapse of the epiphysis. Here, the impact of common variations in geometry is investigated with a finite element model of a juvenile femur under single leg standing and landing. Here, the impact of typical variations in geometry is investigated with a finite element model of a juvenile femur under single leg standing and landing. The variations appear to have only a limited effect on the stress distribution in the femoral epiphysis even during high impact activities. This suggests that, for this individual at least, they would be unlikely to cause epiphyseal overload and collapse, even in the presence of a skeletally immature epiphysis.

Professional Athletes with Fractures May Have a “Degraded” Trabecular Bone Score (TBS)

The aim of this study was to explore the relationships between performances obtained in different physical tests and bone parameters (bone mineral density [BMD], bone mineral content, hip geometry indices, and trabecular bone score [TBS]) in a group of young Lebanese overweight and obese adult men. Fifty-two overweight and/or obese (body mass index > 25 kg/m2) young men whose ages range from 18 to 35 yr participated in this study. Weight and height were measured, and body mass index was calculated. Body composition, BMD, cross-sectional area and section modulus (Z) of the femoral neck (FN), and TBS were measured by dual-energy X-ray absorptiometry. Maximum oxygen consumption (VO2 max, in liter per minute) was determined by direct measurement while exercising on a medical treadmill. One-repetition-maximum half-squat and maximum power (P max) of the lower limbs were measured using validated exercises. Lean mass was a positive determinant of whole-body bone mineral content (r = 0.71, p < 0.001), FN cross-sectional area (r = 0.51, p < 0.001), and FN Z (r = 0.58, p < 0.001). VO2 max (in liter per minute) was a positive determinant of whole-body BMD (r = 0.47, p < 0.001), total hip BMD (r = 0.43, p < 0.01), and FN BMD (r = 0.42, p < 0.01). VO2 max (in milliliter per minute per kilogram) was a positive determinant of TBS (r = 0.30, p < 0.05). One repetition maximum was a positive determinant of L1–L4 BMD (r = 0.33, p < 0.05). This study suggests that VO2 max (in liter per minute) is a positive determinant of BMD, and VO2 max (in milliliter per minute per kilogram) is a positive determinant of TBS in overweight and obese men.

Comparative Analysis of the Reconstruction of Individual Hip Anatomy Using 3 Different Cementless Stem Designs in Patients With Primary Hip Osteoarthritis

BackgroundWe questioned whether there was a radiographic difference in hip geometry reconstruction and implant fixation between 3 different cementless stem design concepts in patients with primary end-stage hip osteoarthritis. MethodsWe retrospectively evaluated the preoperative and postoperative radiographs by 2 independent and blinded reviewers in a series of 264 consecutive patients who had received either a straight double-tapered stem with 3 offset options (group A), a straight double-tapered stem with 2 shape options and modular necks (group B), and a bone-preserving curved tapered stem with 4 offset options (group C). The following parameters were assessed: acetabular, femoral and hip offset (HO), center of rotation height, leg length difference (LLD), and the endosteal fit of stem in the proximal femur (canal fill index). Group comparisons were performed using a one-way analysis of variance and subsequent pairwise comparisons (t-test). ResultsPostoperatively, HO could be equally restored with all 3 stem designs (P = .079). The postoperative LLD was smaller in group C compared to group A (0.8 mm [standard deviation, 3.2] vs 2.6 mm [standard deviation, 4.5], P = .002). Best combined reconstruction of HO and LLD could be achieved with the short curved stem by junior and senior surgeons (HO: −2.0 and −2.1 mm; LLD: 1.9 and 0.7 mm, respectively). The proximal and mid-height canal fill indexes were higher in groups B and C compared to group A, indicating a better metaphyseal and diaphyseal fit in the proximal femur (both P < .001). ConclusionAll 3 cementless stem designs allowed for good hip geometry reconstruction. Multiple shape and offset options allowed for a better metaphyseal stem fit and offered minor clinical advantages for leg length reconstruction. Modular necks did not provide reconstructive advantages in patients with primary hip osteoarthritis.

The study of hip geometry in evaluating osteoporotic fracture risk in the Mongolian and Han population of Hohhot

The study of hip geometry in evaluating osteoporotic fracture risk in the Mongolian and Han population of Hohhot

Additive Influence of Hip Offset and Leg Length Reconstruction on Postoperative Improvement in Clinical Outcome After Total Hip Arthroplasty

BackgroundThere is a lack of prospective studies investigating the additive effect of both acetabular and femoral reconstruction parameters on the functional outcome following total hip arthroplasty (THA). MethodsThe aim of this prospective cohort study was to determine the combined influence of hip geometry reconstruction and component positioning on the clinical outcome following primary THA for unilateral osteoarthritis. We prospectively assessed the clinical outcome and radiographic parameters for hip geometry reconstruction, component position, and orientation using validated measurements for the operated hip compared to the contralateral native hip in a consecutive series of 113 patients with primary unilateral cementless THA. The correlation of reconstruction parameters was investigated using a multivariate polynomial regression model for the dependent variable ΔHHS (difference between the Harris hip scores preoperatively and 2.0-4.8 years postoperatively). Target zones for hip reconstruction and component positioning were investigated for an association with superior clinical outcome. ResultsThe regression model demonstrated a significant correlation for the ΔHHS and both hip offset (HO) reconstruction and leg length difference. Patients with accurate to slightly increased HO reconstruction combined with balanced leg length demonstrated a significantly higher ΔHHS than patients outside this zone (HO: 5 ± 5 and LLD: 0 ±5 mm, P = .029). This finding could be confirmed for 2 enlarged zones (zone 1: HO, 7.5 ± 7.5 and LLD, 2.5 ± 7.5 mm, P = .028; zone 2: HO, 7.5 ± 7.5 and LLD, 7.5 ± 7.5 mm, P = .007). ConclusionHO and leg length reconstruction demonstrated an additive effect on clinical outcome and surgeons should aim for high accuracy in the reconstruction of both factors.

Muscular fitness, bone mineral density and hip geometry in young males: the PRO-BONE study

Searchable abstracts of presentations at key conferences on calcified tissues ISSN 2052-1219 (online)

Cardiorespiratory fitness, bone mineral density and hip geometry in young males: the PRO-BONE study

Cardiorespiratory fitness, bone mineral density and hip geometry in young males: the PRO-BONE study

Soft tissues, areal bone mineral density and hip geometry estimates in active young boys: the PRO-BONE study

Soft tissues, areal bone mineral density and hip geometry estimates in active young boys: the PRO-BONE study

Determinants of Bone Outcomes in Adolescent Athletes at Baseline: The PRO-BONE Study.

The determinants of areal bone mineral density (aBMD) and hip geometry estimates in adolescent athletes are poorly understood. This study aimed to identify the determinants of aBMD and hip geometry estimates in adolescent male athletes. One hundred twenty-one men (13.1 ± 0.1 yr) were measured: 41 swimmers, 37 footballers, 29 cyclists, and 14 controls. Dual energy X-ray absorptiometry measured aBMD at lumbar spine, femoral neck and total body. Hip structural analysis evaluated hip geometry estimates at the femoral neck. Multiple linear regression examined the contribution of the sports practised, stature, lean and fat mass, serum calcium and vitamin D, moderate to vigorous physical activity, vertical jump and cardiorespiratory fitness with aBMD and hip geometry estimates. Region-specific lean mass was the strongest positive predictor of aBMD (β = 0.614-0.931) and football participation was the next strongest predictor (β = 0.304-0.579). Stature (β = 0.235-0.380), fat mass (β = 0.189), serum calcium (β = 0.103), serum vitamin D (β = 0.104-0.139), and vertical jump (β = 0.146-0.203) were associated with aBMD across various specific sites. All hip geometry estimates were associated with lean mass (β = 0.370 - 0.568) and stature (β = 0.338-0.430). Football participation was associated with hip cross-sectional area (β = 0.322) and moderate to vigorous physical activity (β = 0.140-0.142). Cardiorespiratory fitness (β = 0.183-0.207) was associated with section modulus and cross-sectional moment of inertia. Region-specific lean mass is the strongest determinant of aBMD and hip geometry estimates in adolescent male athletes. Football participation and stature were important determinants for aBMD and hip geometry estimates, whereas the contribution of the other predictors was site specific.

Oxytocin and Its Relationship to Body Composition, Bone Mineral Density, and Hip Geometry Across the Weight Spectrum.

Oxytocin (OXT), an anorexigenic hypothalamic hormone anabolic to bone, may reflect energy availability. Basal serum OXT levels are lower in anorexia nervosa (AN, state of energy deficit) than healthy controls (HC) and negatively associated with spine bone mineral density (BMD). Reports are conflicting regarding OXT levels in overweight/obesity (OB, state of energy excess). Relationships between OXT and BMD in OB and hip geometry across the weight spectrum are unknown. To determine whether overnight serum OXT levels are (1) elevated in OB and (2) associated with body composition, BMD, and hip geometry across the weight spectrum. Cross-sectional. Clinical research center. Fifty-nine women, ages 18 to 45 years: amenorrheic AN (N = 16), eumenorrheic HC (N = 24), eumenorrheic OB (N = 19). Serum sampled every 20 minutes from 8 pm to 8 am and pooled for integrated overnight OXT levels. Body composition, BMD, and hip structural analysis measured by dual x-ray absorptiometry. OXT levels were lowest in AN, higher in HC, and highest in OB (P ≤ 0.02). There were positive associations between OXT and (1) body mass index (P = 0.0004); (2) total, visceral, and subcutaneous fat (P ≤ 0.0002); (3) spine and hip BMD Z-scores (P ≤ 0.01); and (4) favorable hip geometry, namely buckling ratio (P ≤ 0.05). In a subset analysis of HC and OB, relationships between OXT and body composition, but not bone parameters, remained significant. These data suggest OXT is a marker of energy availability and may be a mediator of bone density, structure, and strength. OXT pathways may provide targets for obesity and osteoporosis treatment.