High Production Research Articles

Association of Dairy Foods in Acne Vulgaris

Background: Acne vulgaris is one of the most commonly found skin problems affecting teenagers and adolescents. Dietary foods particularly dairy products consist of milk or any of its food made from milk are frequently regarded by patients and clinicians as a cause or aggravator of acne. As there are very limited studies found on this regard, this study was aimed to find the association of dairy foods in acne vulgaris. Methods: This wasa cross-sectional analytical study and was carried out in the Dermatology and Venereology department of Shaheed Suhrawardy Medical College Hospital. Total 260 patients were selected by appropriate inclusion criteria equally into two groups: Group A (diagnosed with acne vulgaris, n=130) and group B (patients not having acne vulgaris, n=130). A thorough history of every patient and face to face interview was taken by a predesigned questionnaire after getting the written informed consent of the patient. Data were collected in predetermined data collection form. Result were subjected to standard statistical evaluation and were analyzed by SPSS-24. Results: According to the age group, majority of the acne patients were between 10-20 years (75.4% in group A and 63.8% in group B, p<0.05), though mean age in both groups were statistically similar (18.53±5.78 and 17.29±4.59 years, respectively). Also, female respondents were predominant in both groups (80.8% and 72.3%). The risk was increased in those with a family history of acne in siblings (OR2.449, p=0.021;95% CI,1.145-5.238) and the risk was reduced in subjects doing physical exercise. Papules (35.4%) and comedones (27.7%) were most common lesion and mostly found in forehead (74.6%) and left (68.5%) and right (63.1%) cheeks. According to global acne severity grading, majority had mild form of acne (83.1%) and use of cosmetics (43.8% vs. 30%), topical steroid (34.6% vs. 16.9%), taking fastfood (24.6% vs. 14.6%) and less water intake (36.9% vs. 18.5%) also significantly higher among acne patients. Multivariate regression analysis showed, dairy products such as whole milk (OR 1.984, p=0.022), chocolate (2.490, p=0.004), chips (OR 3.207, p<0.001), Pizza (OR 2.388, p=0.021) and red meat (OR 3.055, p=0.009) were significant risk for developing acne vulgaris. Also, whole milk (3.050, p=0.01), chocolate (3.817, p=0.004) and pizza (3.822, p=0.005) were independent risk factors for moderate to severe acne. Conclusion: This study found an association between high dairy product consumption and acne in adolescents, indicating that dairy consumption may be a contributing factor for developing acne vulgaris. J Shaheed Suhrawardy Med Coll 2022; 14(2): 25-33

REPORT OF PRACTICAL CLASS IN AGRICULTURAL AREA WITH THE BACHELOR CLASS IN AGRONOMY IN THE MUNICIPALITY OF TRACUATEUA-PA

Cassava (Manihot esculenta Crantz) is a highly consumed root and a significant source of carbohydrates in Brazil and around the world. In the state of Pará, cassava is vital to the local economy, especially in the municipality of Tracuateua. The culture involves family farmers and serves as an important source of income and subsistence. Different cultivars are used, such as BRS Tapioqueira and BRS Verdinha, which exceed 70 thousand kg/ha with good management. Adequate fertilization, pest control and weed management are essential for high productivity. Irrigation can significantly increase production. On the property of Mr. Benedito Dutra, member of the RENIVA project, the production of seed cassava and cowpea is highlighted. It uses cultivars developed by Embrapa, such as BRS Kiriris, BRS Formosa and BRS Novo Horizonte, which are recommended for industrial use. Dutra also grows cowpeas, using varieties such as BRS Guirá and BRS Natalina, which are highly productive and adapted to local conditions. The property has an irrigated area of ​​23 hectares per central pivot, ensuring crop hydration during dry periods. During the field visit, several areas of experimentation were observed. The experimental plots of cassava and cowpea showed good performance, with a high survival rate and resistance to pests. The integration of advanced soil management, pest control and irrigation practices highlighted the property as an example of innovative agriculture. The experience on Mr. Dutra’s property demonstrated the importance of innovation and adoption of advanced agricultural practices for sustainable and productive agricultural production.

A local-level agricultural transformation in the making? The case of the cassava industry in the Ashanti and Volta regions of Ghana

ABSTRACT In sub-Saharan Africa, Ghana is recognized as one of the countries undergoing rapid economic transformation. Drawing on an agricultural transformation framework, this study sheds light on the current farm and nonfarm developments in the cassava subsector in five communities across four districts in Ghana. Using a qualitative exploratory research design based on field-work surveys, the study identifies several factors that together showcase manifestations of a transformation process in the studied areas. These include a combination of growing farm sizes, use of new technologies, higher productivity, expanding market opportunities, increased profitability, improved lives and livelihoods, and changing labour structures. These micro-level findings allow the study to offer a richer understanding of dynamics of change underway that could complement macro-oriented analyses of agricultural transformation in Africa.

Empowering Fuel Cell Electric Vehicles Towards Sustainable Transportation: An Analytical Assessment, Emerging Energy Management, Key Issues, and Future Research Opportunities

Fuel cell electric vehicles (FCEVs) have received significant attention in recent times due to various advantageous features, such as high energy efficiency, zero emissions, and extended driving range. However, FCEVs have some drawbacks, including high production costs; limited hydrogen refueling infrastructure; and the complexity of converters, controllers, and method execution. To address these challenges, smart energy management involving appropriate converters, controllers, intelligent algorithms, and optimizations is essential for enhancing the effectiveness of FCEVs towards sustainable transportation. Therefore, this paper presents emerging energy management strategies for FCEVs to improve energy efficiency, system reliability, and overall performance. In this context, a comprehensive analytical assessment is conducted to examine several factors, including research trends, types of publications, citation analysis, keyword occurrences, collaborations, influential authors, and the countries conducting research in this area. Moreover, emerging energy management schemes are investigated, with a focus on intelligent algorithms, optimization techniques, and control strategies, highlighting contributions, key findings, issues, and research gaps. Furthermore, the state-of-the-art research domains of FCEVs are thoroughly discussed in order to explore various research domains, relevant outcomes, and existing challenges. Additionally, this paper addresses open issues and challenges and offers valuable future research opportunities for advancing FCEVs, emphasizing the importance of suitable algorithms, controllers, and optimization techniques to enhance their performance. The outcomes and key findings of this review will be helpful for researchers and automotive engineers in developing advanced methods, control schemes, and optimization strategies for FCEVs towards greener transportation.

Insights into the influence of anions on the syngas production behavior of bio-wastes during molten salt thermal treatment

Thermal treatment of bio-wastes in molten nitrate at low temperatures has emerged as an efficient approach for producing syngas. Molten salt facilitates the thermal conversion of bio-wastes due to its superior heat transfer and catalytic properties. To enhance the depolymerisation of macromolecules in bio-wastes for the production of high-quality syngas, molten NaNO3-NaNO2 with varying anion ratios was employed in this study, and the effects of these anions on bio-wastes with diverse properties were thoroughly investigated. The results indicated that NO3− tended to be significantly involved in the cleavage of carbonyl groups and C–C/CC bonds, which dominated the high CO2 production. NO2− tended to be significantly involved in the cleavage of ether and C–C/CC bonds, which dominated the high CO production. The elevated NO2− ratio in molten salt significantly facilitated the depolymerisation of bio-wastes, increasing the yield of combustible gases (CO, CH4, H2) while decreasing CO2 yield in the syngas. This resulted in a notable enhancement of the lower heating value (LHV) of syngas, reaching up to 11.55 MJ/Nm3. This behavior also led to the formation of substantial quantities of nitro-phenols and amines containing nitro/nitroso groups in the tar. The nitrosation reaction of NO2− with bio-wastes was the primary factor in this process and took precedence over the nitrification of NO3−. This study elucidated the reaction pathways of NO3−/NO2− with bio-wastes and their contributions to the production of high-quality syngas at low temperature.

Mechanical properties and chemical microscopic characteristics of all-solid-waste composite cementitious materials prepared from phosphogypsum and granulated blast furnace slag

Industrial wastes, such as phosphogypsum, are characterized by high production and accumulation volumes, and significant pollution. A high-performance, all-solid waste, phosphogypsum-based composite cementitious material (PCCM) was developed by using a hybrid ball milling method and thermal activation to stimulate various industrial wastes. Optimization of rationing was analyzed using extreme variance, standard variance, and multiple regression models. The macro-engineering parameters of PCCM were evaluated through flexural and compressive tests. The mineralogical composition, functional groups, micro-morphology, and molecular structure of PCCM were examined through micro-testing. When the mass ratio of Ball milled calcined phosphogypsum (BCPG) to granulated blast furnace slag (GGBS) is 1.2:1, with a 4 % addition of calcium oxide and a water-cement ratio of 0.4, the 28-day flexural and compressive strengths, as well as the softening coefficients, of PCCM can reach 7.27 MPa, 40.1 MPa, and 0.922, respectively, closely matching the performance of C42.5 cement. Under the synergistic effects of the hydration reaction and an alkaline environment, the CaSO4 in the PCCM system hydrated and crystallized to produce gypsum-phase crystals, enhancing early strength properties by 60–174 %. As hydration continued, SO42- reacted with silicon and aluminum oxides, prompting secondary hydration of GGBS, and increasing AFt and C-(A)-S-H in the system. This research offers a new approach for the co-disposal and resource utilization of various solid wastes while identifying a cementitious material that can replace traditional cement in practical engineering applications.

Energy-conversion efficiency for producing oxy-hydrogen gas using a simple generator based on water electrolysis

Producing hydrogen efficiently through water electrolysis could greatly reduce fossil fuel consumption. As well as this renewable energy source will also help combat global warming and boost economic investment opportunities. This paper studied some factors affecting the performance of oxy-hydrogen/hydroxy (HHO) gas generator, such as applied voltage (from 10.5 to 13.0 V) and electrolyte solution concentration (from 0.05 to 0.20 M), using a dry fuel cell based on the electrolyzing technique of water. The results revealed that the HHO gas production rate, power consumption, and temperature change of electrolyte solution increased significantly with increasing the tested applied voltage and electrolyte concentration. This study concluded that the optimum conditions for producing HHO gas ranged from 11.5 to 12.0 V for applied voltage and from 0.05 to 0.10 M for KOH concentration according to the lowest specific energy and highest HHO gas generator efficiency. Under the previous optimum conditions, the highest productivity, specific energy, and efficiency of the HHO gas generator were 343.9 cm3 min−1, 3.43 kW h m−3, and 53.79%, respectively, using 12.0 V for applied voltage and 0.10 M for electrolyte solution concentration. These findings provide an unambiguous direction for adjusting the operational factors (applied voltage and electrolyte concentration) for efficient HHO gas production and use in different applications. Furthermore, the required energy to operate the HHO gas generator can be obtained from renewable sources.

Worldwide research trends on bone metastases of lung cancer: a bibliometric analysis

BackgroundLung cancer has the highest fatality rate among all malignancies worldwide. Within this disease, bone metastasis (BM) emerges as a particularly deleterious site of metastatic dissemination, marked by a dismal prognosis. The objective of this investigation is to shed light on the current international research efforts and the development trajectory on lung cancer BM through a bibliometric analysis (performance and visualization analysis).MethodData were obtained from the Web of Science Core Collection repository on lung cancer BM from 1 January 2012 to 1 January 2022. Subsequently, the collected data underwent scrutiny using the VOSviewer software to reveal patterns of co-authorship, co-citation, and keyword analysis, while the CiteSpace software facilitated the generation of keyword cluster maps and performed burst analyses.ResultsThe study included 327 papers of 2,154 authors, 587 organizations, and 41 countries, and explored the cooperation between them and the relationships between citations. Over the past decade, published papers showed a steady growth trend. China had the highest production with 189 papers, and USA had the highest collaboration with other countries, with 43 total link strength. Lung Cancer exhibited the highest frequency of co-cited journals, with a co-citation time of 412 and an IF/JCR partition of 6.081/Q1 in 2021. The most frequently co-cited article, authored by Tsuya A and published in Lung Cancer in 2007, amassed 70 co-citations. High-frequency keywords were categorized into four clusters: pathogenesis, treatment and clinical manifestations, prognosis, and diagnosis. In recent years, there has been a significant increase in the strong citation burst strength of keywords such as “predictor,” “skeletal-related events,” “efficacy,” “migration,” “docetaxel,” and “impact.” Lung adenocarcinoma is the most common type of tumor.ConclusionThis bibliometric study provides a comprehensive analysis of lung cancer BM in the recent 10 years. The field of early diagnosis, pathogenesis, and new treatments is entering a phase of rapid development and remains valuable for future research.

Exploring the effect of fertilizer application on yield and decoding CO2 flux under flooded paddy conditions towards sustainable agriculture

The impact of organic and inorganic nutrient management on the emission of carbon dioxide (CO2), soil properties such as available nutrients, microbial population and soil organic carbon (SOC) were investigated in paddy (Oryza sativa L.) field (at 8o 46’ N Latitude and 77o 42?’ E Longitude) under flooded condition during late pishanam season in 2023-2024. The treatments were designed to observe the effects of applying fertilizer based on the soil test crop response (100 % STCR-based NPK) that had been modified by organic amendments, which include absolute control (unfertilized), inorganic fertilizers, sole application of organic amendments (Farm yard manure, Green leaf manure, Vermicompost and Poultry manure) and combined these organic amendments with inorganic fertilizers. The main objective of this study is to understand the intricate relationship between fertilizers and carbon flux in paddy soils, which is crucial for developing sustainable agricultural practices that minimize environmental harm while ensuring food security. The observation of the experimental field study reported that the combined application of poultry manure at the rate of 5 tonnes per hectare with 100% STCR-based inorganic fertilizer recorded maximum yield and yield attributes. The treatment combination of poultry manure + inorganic fertilizer enhanced in sequestrating the soil organic carbon (0.67%) resulted in higher grain yield (5972 kg ha-1) and also observed that this combination will limit the emission of CO2 to the atmosphere. Therefore, it could be a better choice for carbon storage and higher productivity in a sustainable rice cropping system.

Comparative metabolomics reveals the mechanism for the high GA4 production in Gibberella fujikuroi CGMCC 17793

With unique advantages, gibberellin GA4 has broad application prospects. To explore the regulatory mechanism for the biosynthesis of GA4, we combined liquid chromatography-mass spectrometry (LC-MS)-based metabolomics with principal component analysis (principal component analysis, PCA) and partial least squares-discriminant analysis (PLS-DA) to screen and identify the differential metabolites between the GA4-producing strains S (industrial high-yield strain CGMCC 17793) and wild-type strain Y (NRRL 13620) of Gibberella fujikuroi fermented for the same time and the differential metabolites of strain S fermented for different time periods. KEGG and MBROLE 2.0 were used to analyze the metabolic pathways involving the differential metabolites. The results showed that compared with strain Y, strain S significantly upregulated and downregulated 107 and 66, 136 and 47, and 94 and 65 metabolites on days 3, 6, and 9, respectively. Compared with that on day 3 of fermentation, strain S upregulated 29 metabolites and downregulated 40 metabolites on day 6 and upregulated 52 metabolites and downregulated 67 metabolites on day 9. The differential metabolites between strain S and strain Y after fermentation for the same time were mainly enriched in amino acid metabolism, tricarboxylic acid (TCA) cycle, and terpenoid biosynthesis. The differential metabolites of strain S after fermentation for different time periods were mainly enriched in amino acid and sugar metabolism pathways. Pathway annotation results indicated that strain S increased the production of acetyl-CoA by promoting amino acid and sugar metabolism and TCA cycle, thereby enhancing the mevalonic acid pathway and increasing the content of isopentenyl pyrophosphate (IPP), a precursor for the synthesis of terpenoids, which ultimately led to increased GA4 production. This study explored the metabolic rules of Gibberella fujikuroi GA4, providing a theoretical basis for regulating Gibberella fujikuroi to improve GA4 production.

Precise Single-Atom Modification of Hybrid Lead Chlorides for Electron Donor-Acceptor Effect and Enhanced Photocatalytic Aerobic Oxidation.

Hybrid lead halides show significant potential in photocatalysis due to their excellent photophysical properties, but the atomically precise modification of their organic component to achieve synergistic interactions with the lead halide units remains a great challenge. Herein, for the first time, we have employed the crystal engineering strategy to construct a class of single-atom-substituted hybrid lead halides with electron donor-acceptor (D-A) effect. The lead halide frameworks consist of 1D linear [PbCl]+ chains as inorganic building units and benzoxadiazole/benzothiadiazole/ benzoselenadiazole-funtionalized dicarboxylates as linkers. The covalent bonding between the organic ligands with electron-withdrawing groups and the electron-rich lead halide units not only facilitate the charge separation, but also enhance structural robustness that is critical for photocatalysis. The D-A structured lead halides serve as highly efficient heterogeneous photooxidation catalysts, including aerobic oxidation of C(sp3)-H bonds, oxidative coupling of primary amines, oxidation of phenylboronic acids and selective oxidation of sulfides that are demonstrated in 30 examples. Importantly, these photooxidation reactions are able to be driven by natural sunlight and ambient air to afford quantitative yields. Moreover, our lead halide photocatalysts are successful to fix into a photocatalytic flow system, which enables the flow-type synthesis of high value-added photooxidation products on a gram scale.

Structural Characterization and Antioxidant Activity of Exopolysaccharide Produced from Beet Waste Residue by Leuconostoc pseudomesenteroides

Lactic acid bacteria exopolysaccharide (EPS) is a large molecular polymer produced during the growth and metabolism of lactic acid bacteria. EPS has multiple biological functions and is widely used in fields such as food and medicine. However, the low yield and high production cost of EPS derived from lactic acid bacteria limit its widespread application. In this study, we used beet waste residue as a substrate to produce EPS by fermentation with Leuconostoc pseudomesenteroides to improve the utilization rate of agricultural waste and reduce the production cost of lactic acid bacterial EPS. After purification, the molecular weight (Mw) of EPS was determined to be 417 kDa using high-performance size exclusion chromatography (HPSEC). High-performance liquid chromatography (HPLC), Fourier transform infrared (FTIR) spectroscopy, and nuclear magnetic resonance (NMR) spectroscopy revealed that the EPS was composed of glucose subunits with α-1,6 glycosidic linkages. The thermal analysis and heavy metal adsorption capacity revealed a relatively high degradation temperature of 315.54 °C and that the material could effectively adsorb Cu2+. Additionally, the findings indicated that the EPS exhibited a significant ability to neutralize free radicals, a property that was found to be concentration dependent. Furthermore, the results of the intracellular study showed the protective effect of freshly isolated EPS on tBHP-induced cellular oxidative stress at a concentration of 50 µg/mL. These results suggest that the EPS from L. pseudomesenteroides may be developed as antioxidant agents for functional food products and pharmaceutical applications due to its capacity to scavenge free radicals.

Evaluating Typing Performance in Different Mixed Reality Manifestations using Physiological Features

Mixed reality enables users to immerse themselves in high-workload interaction spaces like office work scenarios. We envision physiologically adaptive systems that can move users into different mixed reality manifestations, to improve their focus on the primary task. However, it is unclear which manifestation is most conducive for high productivity and engagement. In this work, we evaluate whether physiological indicators for engagement can be discriminated for different manifestations. For this, we engaged participants in a typing task in three different mixed reality manifestations (augmented reality, augmented virtuality, virtual reality) and monitored physiological correlates (EEG, ECG, and eye tracking) of users' engagement and workload. We found that users achieved best typing performances in augmented reality and augmented virtuality. At the same time, physiological engagement peaked in augmented virtuality, while workload decreased. We conclude that augmented virtuality strikes a good balance between the different manifestations, as it facilitates displaying the physical keyboard for improved typing performance and, at the same time, allows one to block out the real world, removing many real-world distractors.

Therapeutic liver cell transplantation to treat murine PKU.

For gene therapy of the liver, in vivo applications based on adeno-associated virus are the most advanced vectors despite limitations, including low efficacy and episomal loss, potential integration and safety issues, and high production costs. Alternative vectors and/or delivery routes are of high interest. The regenerative ability of the liver bears the potential for ex vivo therapy using liver cell transplantation for disease correction if provided with a selective advantage to expand and replace the existing cell mass. Here we present such treatment of a mouse model of human phenylketonuria (PKU). Primary hepatocytes from wild-type mice were gene modified in vitro (with a lentiviral vector) that carries a gene editing system (CRISPR) to inhibit Cypor. Cypor inactivation confers paracetamol (or acetaminophen) resistance to hepatocytes and thus a growth advantage to eliminate the pre-existing liver cells upon grafting (via the spleen) and exposure to repeated treatment with paracetamol. Grafting Cypor-inactivated wild-type hepatocytes into inbred young adult enu2 (PKU) mice, followed by selective expansion by paracetamol dosing, resulted in replacing up to 5% of cell mass, normalization of blood phenylalanine, and permanent correction of PKU. Hepatocyte transplantation offers thus an armamentarium of novel therapy options for genetic liver defects.

Estimation of corn hybrids of different early maturity by fodder productivity in the conditions of the forest-meadow zone of the Middle Urals

The paper presents the results of assessing the feed productivity of various ultra-early and early-maturing corn hybrids created by the All-Russian Research Institute of Corn. In the Sverdlovsk region, 12 corn hybrids with FAO 140–180 were studied in 2019–2023. The soil of the research site is dark gray, forest, slightly podzolized, heavy loamy. On average, over 5 years, the highest dry matter content is 32.4… 36.1 % were recorded in the FAO 140–150 group, among which hybrids K 140 (35.0 %) and Mashuk 140 (36.1 %) stand out. In the FAO 140 group (K 140, Nur), the starch content in dry matter reached a maximum of 31.1… 30.4 per cent, while for FAO 180 (Sheehan) it was only 24.7 per cent. The maximum productivity on average over the years of research was observed in hybrids FAO 170–180 Mashuk 172 and Shihan (34.8 t/ha). The minimum for hybrids FAO 140 K 140 (26.3 t/ha) and Mashuk 140 (26.5 t/ha). Against the background of heat deficit (2019), the maximum productivity was in the FAO 140–150 groups: K 140 (3.88 t/ha), Nur (4.03 t/ha), Mashuk 140 (3.99 t/ha), K 150 (4.11 t/ha). In terms of the collection of the target component – starch, the highest productivity on average for 5 years was shown by hybrids of the FAO 140–150 group: Nur (2.93 t/ha), K 150 (2.81 t/ha) and Mashuk 140 (2.68 t/ha). It has been established that that in the conditions of the Middle Urals, from the set of hybrids bred by the All-Russian Research Institute of Corn, the highest fodder productivity is – K 140, Nur, Mashuk 140, K 150.

Exploring complete catalytic cycle of methane oxidation to methanol on Cu2O2 stabilized within MIL-53(Al) framework: A combined DFT and microkinetic study

Although inspiration from copper-based natural enzymes has shown promise in improving catalyst design for methane-to-methanol (MTM) oxidation, high productivity, and selectivity under mild conditions remain a significant challenge. This study constructs the dinuclear copper (Cu2) species stabilized within the metal-organic framework (MOF), MIL-53(Al), containing Cu as efficient catalytic sites and explores the ability of different oxidants (O2, N2O, and H2O2) to oxidize Cu2 into the dicopper-oxo (Cu2O2) species using density functional theory (DFT) calculations. Our results indicate the kinetic and thermodynamic favorability of Cu2O2 species formation using O2 as an oxidant within the MIL-53(Al) framework. Furthermore, the thermal stability of Cu2O2/MIL-53(Al) has been verified via ab initio molecular dynamics (AIMD) calculations. The kinetics of the complete MTM oxidation cycle over Cu2O2/MIL-53(Al) have been studied using both DFT and microkinetic simulation methods. The present study predicts that the C-H activation on the Cu2O2/MIL-53(Al) has a low free energy barrier (0.77 eV) and that the high stability of CH3 and its very low free energy barrier in the C-O coupling step favors the methanol formation over the formaldehyde. More importantly, Cu2O2/MIL-53(Al) exhibits high methanol selectivity owing to the inhibition of CH3 dehydrogenation and low methanol desorption energy (0.21 eV). Microkinetic simulations confirm the methanol production under relatively mild reaction conditions (200–280 K and 1 bar). This work provides insights into the feasibility of selective MTM oxidation over this family of MOF under mild conditions.

Intensified upwelling: normalized sea surface temperature trends expose climate change in coastal areas

Abstract. Eastern boundary upwelling systems (EBUSs) provide valuable natural resources due to their high primary production. However, there is significant uncertainty in how climate change may affect the mechanisms that sustain these ecosystems in the future. Therefore, assessing the effects of climate change on EBUSs under the current global warming scenario is crucial for efficient ecosystem management. In 1990, Andrew Bakun suggested an increase in the upwelling intensity due to the rise of the ocean–land pressure gradient. Since there is a significant link between thermal gradients and offshore Ekman transport, we use sea level pressure (SLP) and deseasonalized sea surface temperature (SST) data from remote sensing to elucidate this hypothesis and validate it using in situ observations. SST is an indicator of coastal upwelling, and our long-term analysis of monthly and deseasonalized SST records shows that the seasonal and synoptic processes have minimal influence on the SST–upwelling intensity relationship. Upwelling within the same EBUS is not usually evenly distributed along coastlines, leading to upwelling in specific areas, referred to as upwelling centers. We compare the SST trends in the main upwelling centers of the four EBUSs with those in open ocean waters through a new index, αUI, designed to characterize upwelling changes in the EBUS. An a-dimensional number allows us to normalize the trends independently of the upwelling system and compare all of them. Furthermore, we have complemented the SST index with sea level pressure gradient data. This new index (supported by SLP gradient trends) indicates intensification in all the EBUSs, revealing a coherent pattern within EBUSs in the same ocean (i.e., Canarian and Benguela or Californian and Humboldt upwelling systems).

Evaluation of bond strength in bamboo reinforced-high grade concrete at elevated temperature

Abstract Concrete traditionally relies on steel reinforcement to address its weak tensile strength. However, due to concerns such as high production costs, non-renewability, and sustainability issues associated with steel, developing countries like India and African nations are turning to locally available bamboo as a reinforcement material in low-cost buildings. This study explores the feasibility of bamboo reinforcement in fly ash concrete (FAC) by examining the post-fire behavior of the bond strength between bamboo and FAC through pull-out tests. Initial tensile strength assessments of locally available bamboo strips are carried out. Various mechanical and chemical treatments, including grooving, wire wrapping, clamping, and epoxy-based sand coating, are applied to investigate their impact on post-fire bond strength. Despite certain treatments exhibiting higher initial bond strengths, their susceptibility to the fire test emphasizes the need for ongoing research and refinement. Notably, the treatment involving plain bamboo with epoxy-based sand coating and wire wrapping emerges as a promising option, demonstrating resilience with only a 21% drop in bond strength after exposure to fire.

Energy, environmental footprints and economic benefit of substituting inorganic fertilizer with organic manure for winter wheat in Huanghuaihai Plain

Manure substitution shows promise for nitrogen (N) management, food security, energy balance and environmental costs reduction. However, there is limited research on this practice in the Huanghuaihai Plain. This study aimed to investigate the energy use efficiency, economic benefits, carbon and nitrogen footprint under two types of N fertilizer (U, urea and M, organic manure), two application rates of N (180 kg N ha−1, U1 for 100 % urea and M1 for 100 % organic manure; 90 kg N ha−1, U2 for 50 % urea and M2 for 50 % organic manure) and no fertilizer application treatment (CK) for winter wheat from 2017 to 2019. Results showed that grain yield and agricultural input cost under N application rate of 90 kg N ha−1 was 15.5 % and 7.8 % lower than that of 180 kg N ha−1, respectively, leading to a significant decrease in economic benefit. Under the same N rate, M1 obtained higher grain yield than U1, grain yield of M2 did no differ in that of U2. Total energy inputs and agricultural input costs of M were 9.5 % and 3.6 % lower than U, resulting in higher energy use efficiency and economic benefit. The reduced agricultural input for M was primarily due to a decrease in the application of inorganic fertilizer. Compared with other treatments, U2+M2 obtained higher grain yield, energy use efficiency, and economic benefit. The carbon and nitrogen footprint on unit grain yield of U1 was increased by 13.7 %-24.1 % and 3.9 %-19.6 %, which was attributed to the increase in direct N2O emissions, indirect carbon emission and losses of reactive N from agricultural inputs. Overall, U2+M2 sustained high productivity and reduced the environmental impact. Substituting inorganic fertilizer with organic manure was a promising strategy to improve agricultural production with less agricultural inputs and environmental footprints in the Huanghuaihai Plain.

Investigation of Arc Stability in Wire Arc Additive Manufacturing of 2319 Aluminum Alloy

Wire Arc Additive Manufacturing (WAAM) technology, known for its low equipment and material costs, high material utilization, and high production efficiency, has found extensive applications in the fabrication of key components for the aerospace and aviation industries. The stability of the arc is crucial for the WAAM process as it directly affects the forming of the parts. In this study, the monitoring data of electrical signals and arc morphology during the WAAM process of 2319 aluminum alloy were investigated using a high-speed camera system and current/voltage acquisition system. By analyzing the current and voltage signals, as well as the arc imaging results, the influence of arc stability on the forming of the cladding layer was studied. The experimental results indicated that when both current and voltage exhibit regular periodic fluctuations, this manifests as a stable short-circuit droplet transition form, while sudden changes in these signals represent abnormal droplet transition forms. The adaptability of the process directly influenced the arc shape, thereby affecting the forming of the cladding layer. Under the process parameters of welding speed of 240 cm/min and wire feeding speed of 6.5 m/min, it was observed that the current signal exhibited a tight state and the variance of the arc width was minimized. This indicated that at a higher wire feeding speed, the droplet transfer frequency was increased. Under these process parameters, the arc output was more stable, resulting in a uniform metal coating.