To address the issue of strength and toughness inversion in traditional metal matrix composites, which are reinforced by uniformly distributed ceramic particles, this research developed a novel space bundle configuration of reinforced iron matrix composite using tungsten wire (W) and tungsten carbide (WC). This composite was prepared using a lost foam casting process combined with in-situ reaction. Microstructural analysis revealed that WC particles are distributed along the tungsten wire, with larger particles at the center and smaller ones at the edges. The formation of the reinforcement occurs in two stages: first, a solid-liquid reaction between the solid tungsten wire and molten iron during the lost foam casting process, promoting WC formation at high temperatures and carbon potential; second, an in situ solid-solid reaction where Fe diffuses and Fe3W3C decomposes, forming a composite structure of WC and α-Fe. The composite obtained at 1100 °C for 9 h exhibited a compressive strength of 836.59 MPa and a fracture strain of 18.69 %, representing increases of 48.46 % and 48.69 % respectively compared to gray cast iron (GCI). The (W) WC/Fe bundle reinforcement effectively enhances the strength and toughness of the composite through the high volume fraction and gradient distribution of WC particles, combined with the synergistic effect of α-Fe. This research provides a new strategy for improving the mechanical properties of composite materials and resolving the issue of strength-toughness inversion.
Read full abstract