High Capacity Research Articles

Ti-Substituted O3-NaNi0.5Mn0.3Ti0.2O2 Material with a Disordered Transition Metal Layer and a Stable Structure.

O3-type NaNi0.5Mn0.5O2 (NNM) is very competitive for sodium-ion batteries (SIBs) due to its high capacity and easy production. Nevertheless, the intricate phase transitions during the charging-discharging significantly impede its practical application. This paper proposes a strategy for successfully synthesizing NaNi0.5Mn0.3Ti0.2O2 (NNMT) by combining coprecipitation and a high-temperature solid-state method. This method introduces Ti elements while retaining the electrochemically active Ni2+ content, thus, the NNMT has a high initial specific capacity of 151.4 mAh g-1 at 1 C. It is demonstrated that introducing Ti4+ leads to the transition metal layers becoming disordered by ex situ XRD, thus mitigating the irreversible phase transition of the material. In addition, Ti4+ does not have an outer electron, which can reduce electron delocalization in the transition metal layer and improve the material's cyclic stability. The NNMT possesses a capacity retention rate of 60.66% after 150 cycles, much higher than the initial NNM's 18.96%. It also exhibits an excellent discharge capacity of 86.8 mAh g-1 at 5 C. In conclusion, the cycling and rate performance of the Ti-substituted NNMT are greatly improved without capacity loss, which offers innovative concepts for the modification means of the SIBs layered oxide cathode materials.

Achieving Remarkable Specific Mechanical Strength and Energy Absorption Capacity in SiC Nanowire Networks through Graded Structural Design.

Lightweight porous ceramics with a unique combination of superior mechanical strength and damage tolerance are in significant demand in many fields such as energy absorption, aerospace vehicles, and chemical engineering; however, it is difficult to meet these mechanical requirements with conventional porous ceramics. Here, we report a graded structure design strategy to fabricate porous ceramic nanowire networks that simultaneously possess excellent mechanical strength and energy absorption capacity. Our optimized graded nanowire networks show a compressive strength of up to 35.6 MPa at a low density of 540 mg·cm-3, giving rise to a high specific compressive strength of 65.7 kN·m·kg-1 and a high energy absorption capacity of 17.1 kJ·kg-1, owing to a homogeneous distribution of stress upon loading. These values are top performance compared to other porous ceramics, giving our materials significant potential in various engineering fields.

Superhydrophobic Metal-Organic Framework-Based Composite Featuring Removal of Hydrophobic Drugs and Pesticides and Antibacterial Activities.

The widespread use and contamination of natural sources by new-generation drugs and pesticides have enhanced concern about environmental pollution. Understanding the above importance, we developed a superhydrophobic metal-organic framework (MOF) (SHMOF': [Zr6O4(OH)4(BDC-NH-CO-R)2.4(BDC-NH2)0.6(CF3COO)6]·2.5H2O·4DMF) for ecological remediation via adsorption-based separation of hydrophobic drugs (flurbiprofen) and pesticides (fluazinam). The newly developed SHMOF' has a high adsorption capacity toward flurbiprofen and fluazinam, i.e., 435 and 575 mg/g, respectively. The adsorption equilibrium time of the MOF is very short (15 and 10 min for flurbiprofen and fluazinam, respectively). The outstanding superhydrophobic nature of the MOF was employed to separate flurbiprofen and fluazinam from highly alkaline and acidic media and environmental water samples. The SHMOF' has excellent selectivity toward the adsorption-based separation of flurbiprofen and fluazinam in the coexistence of common analytes. Again, we developed a polypropylene (PP) fabric-based composite of SHMOF' (SHMOF'@PP) to separate the hydrophobic targeted analytes by using a zero-energy-consuming filtration-based separation method, which made this separation process cost-efficient and user-friendly. Moreover, Ag nanoparticles were doped to the superhydrophobic composite. The Ag-doped reusable SHMOF'@PP@Ag composite exhibited excellent bacterial antiadhesion and antibacterial properties toward Staphylococcus aureus bacteria.

Postsynthetically Modified Cationic, Robust MOF Featuring Selective Separation of Carboxylate-Containing Pharmaceutical Drugs from Water at Neutral pH: Elucidation of the Adsorption Mechanism by Theory and Experiments.

The escalating levels of hazardous pharmaceutical contaminants, specifically nonsteroidal anti-inflammatory drugs (NSAIDs), in groundwater reservoir surfaces and surface waterway systems have prompted substantial scientific interest regarding their potential deleterious effects on both aquatic ecosystems and human health. Extraction of those pollutants from wastewater is quite challenging. Hence, the development of economic, sustainable, and scalable techniques for capturing and removing those pollutants is crucial to ensure water safety. Herein, we demonstrate a physicochemically stable, reusable, porous Hf(IV)-based cationic metal-organic framework (MOF), namely, 1'@MeCl for the aqueous phase adsorption-based removal of NSAIDs (diclofenac, naproxen, ibuprofen) from the wastewater environment. The highly positively charged surface of the 1'@MeCl MOF enables it to selectively extract more than 99% of diclofenac, naproxen, and ibuprofen contaminants within less than 30 s. With fast adsorption kinetics, very high adsorption capacities (Qe) were achieved at neutral pH for diclofenac (482.9 mg/g), naproxen (295.9 mg/g), and ibuprofen (219.5 mg/g). Moreover, the influence of changes in pH and coexisting anions on the adsorption property of the 1'@MeCl MOF was studied. Furthermore, the adsorption efficiency of 1'@MeCl in different real water environments was ensured by performing diclofenac, naproxen, and ibuprofen adsorption from tap, river, and lake water. Moreover, a 1'@MeCl-anchored cellulose acetate-chitosan membrane was developed successfully to demonstrate the membrane-based extraction of diclofenac, naproxen, and ibuprofen from contaminated water. Furthermore, a molecular-level mechanistic study was performed through experimental and computational study to propose the plausible adsorption mechanisms for diclofenac, naproxen, and ibuprofen over the surface of 1'@MeCl.

Optimizing Hard Carbon Anodes from Agricultural Biomass for Superior Lithium and Sodium Ion Battery Performance.

Biomass-derived carbon materials are gaining attention for their environmental and economic advantages in waste resource recovery, particularly for their potential as high-energy materials for alkali metal ion storage. However, ensuring the reliability of secondary battery anodes remains a significant hurdle. Here, we report Areca Catechu sheath-inner part derived carbon (referred to as ASIC) as a high-performance anode for both rechargeable Li-ion (LIBs) and Na-ion batteries (SIBs). We explore the microstructure and electrochemical performance of ASIC materials synthesized at various pyrolysis temperatures ranging from 700 to 1400 °C. ASIC-9, pyrolyzed at 900 °C, exhibits multilayer stacked sheets with the highest specific surface area, and the least lateral size and stacking height. ASIC-14, pyrolyzed at 1400 °C, demonstrates the most ordered carbon structure with the least defect concentration and the highest stacking height and an increased lateral size. ASIC-9 achieves the highest capacities (676 mAh/g at 0.134C) and rate performance (94 mAh/g at 13.4C) for hosting Li+ ions, while ASIC-14 exhibits superior electrochemical performance for hosting Na+ ions, maintaining a high specific capacity after 300 cycles with over 99.5% Coulombic efficiency. This comprehensive understanding of structure-property relationships paves the way for the practical utilization of biomass-derived carbon in various battery applications.

Viologen-Derived Covalent Organic Frameworks: Advancing PFAS Removal Technology with High Adsorption Capacity.

The escalating presence of per- and polyfluoroalkyl substances (PFAS) in drinking water poses urgent public health concerns, necessitating effective removal. This study presents a groundbreaking approach, using viologen to synthesize covalent organic framework nanospheres: MELEM-COF and MEL-COF. Characterized by highly crystalline features, these nanospheres exhibit exceptional affinity for diverse anionic PFAS compounds, achieving simultaneous removal of multiple contaminants within 30 min. Investigating six anionic PFAS compounds, MEL- and MELEM-COFs achieved 90.0-99.0% removal efficiency. The integrated analysis unveils the synergistic contributions of COF morphology and functional properties to PFAS adsorption. Notably, MELEM-COF, with cationic surfaces, exploits electrostatic and dipole interactions, with a 2500mg g-1 adsorption capacity-surpassing all reported COFs to date. MELEM-COF exhibits rapid exchange kinetics, reaching equilibrium within 30min. These findings deepen the understanding of COF materials and promise avenues for refining COF-based adsorption strategies.

Liquid Metal-Modified 3D Cu Foam for Dendrite-Free Sodium Plating.

Sodium metal is regarded as one of the most promising anode materials due to its high theoretical capacity (1166mAhg-1) and low redox potential (-2.714V vs standard hydrogen electrode). However, the practical application of sodium metal is hindered by the formation of dendrites during Na stripping and plating, which can degrade performance and cause potential safety hazards. To address this issue, previous work focuses on leveraging either 3D current collectors or liquid metal modification on current collectors. In this work, both strategies are simultaneously leveraged to design a 3D Cu foam with liquid metal modification (LM@Cu) for dendrite-free sodium plating. The 3D configuration of Cu effectively reduces local current density and evenly distributes electric fields, while the introduction of liquid metal enhances the sodiophilicity of Cu to lower the nucleation barrier for sodium, thereby promoting its uniform plating. As a result, symmetric cells of Na with LM@Cu maintain stable cycling for over 2800h. Additionally, full cells comprising Na-LM@Cu and Na3V2(PO4)3 sustain 97.5% of the capacity upon 1000 cycles, underscoring the great potentiality of liquid metal-mediated 3D current collectors in energy storage.

Highly efficient and reusable polyacrylonitrile-based nanocomposite sorbents for oil spill removal

Nanostructured porous materials are desirable sorbents for separating and removing oil spills from water. This work examines the performance of the prepared efficient sorbents in the oil sorption process. Polyacrylonitrile (PAN) fibers served as the skeleton matrix, while glutaraldehyde and poly(vinyl alcohol) (PVA) served as cross-linking agents. The prepared polymer sorbents showed high adsorption capacity (12.47 g/g), porosity (95.41%) and low density (0.069 g/cm3). The incorporation of carbon nanostructures (nanotubes or graphene oxide) in the sorbent increased the adsorption capacity to 14.85 g/g. The hydrophobic nature of carbon nanotubes significantly increases the contact angle of water with the surface of the nanocomposite absorber and reaches 137.5 degrees. The obtained sorbents showed good reusability in the adsorption process and maintained an adsorption capacity of about 10 g/g after 5 cycles. The optimal temperature range for using nanocomposite sorbents was 25°C to 35°C. The combination of high sorption capacity, low porosity and density in modified polyacrylonitrile, along with its reusability, makes this designed sorbent highly suitable for efficient removal of oil spills.

A universal strategy towards high-rate and ultralong-life of Li‐rich Mn‐based cathode materials

Lithium-rich manganese-based cathode materials (LRMs) have shown promise for the next-generation lithium battery cathodes due to their high discharge specific capacity (∼250 mAh g−1) and wide operating voltage range (2.0–4.8 V). However, these materials face limitations such as low initial Coulombic efficiency (ICE), poor cycle stability, and inadequate rate capability. To address these challenges, we employed a simple citric acid treatment (CA-treatment) method to fabricate the Li-rich spinel coating layer on LRMs. This in situ formed spinel Li4Mn5O12 layer successfully suppresses the oxygen release, provides three-dimensional (3D) lithium-ion diffusion channels and enriches Li embedding sites, resulting in a substantial improvement in the rate capability and high-rate cycling performance. The modified LRM delivers a high specific capacity of 193.7 mAh g−1 at 2.0 C and 154.8 mAh g−1 at 5.0 C, after 1000 cycles at 10.0 C, 77.4 % capacity retention with 102.5 mAh g−1 is realized. This facile CA-treatment benefits the electrochemical properties of LRMs comparable to those of altering the microscopic morphology. This work offers a new avenue for exploring outstanding LRMs with high-rate and ultralong cycling life.

A Redox-Active Iron-Organic Framework Cathodes for Sustainable Magnesium Metal Batteries.

Rechargeable magnesium metal batteries (RMBs) have shown promising prospects in sustainable energy storage due to the high crustal abundance, safety, and potentially large specific capacity of magnesium. However, their development is constrained by the lack of effective cathode materials that can achieve high capacity and stable magnesium storage at a practically reasonable rate. Herein, we construct a three-dimensional (3D) iron(III)-dihydroxy-benzoquinone (Fe2(DHBQ)3) metal-organic framework (MOF) material with dual redox centers of Fe3+ cations and DHBQ2- anions for reversible storage of Mg2+ in RMBs. Spectroscopic analysis and density functional theory (DFT) calculations reveal the redox chemistry of both Fe3+ ions and carbonyls from DHBQ ligands during electrochemical processes. Benefiting from the rational structure, the Fe2(DHBQ)3∥Mg cells exhibit a high reversible capacity of 395.3 mAh/g, large energy density of 463.5 Wh/kg, and high power density of 2456.0 W/kg. Moreover, the high electronic conductivity (8.35 × 10-5 S/cm) and favorable diffusion path of Mg2+ in Fe2(DHBQ)3 endow the cells with exceptional cycling stability and rate capability with a long life of 5000 cycles at 2000 mA/g. The dual redox-active MOF demonstrates a category of advanced cathode materials for high-performance RMBs.

Importance of Morphology of Layered Double Hydroxide in Electrochemical Energy Storage and Catalysis.

The development of nanomaterials for energy storage and conversion has always been important. Layered double hydroxide (LDH) is a promising material due to its high capacity, tunable composition and easy synthesis. In this work, the morphology of NiCo-LDH is tuned with surfactants including sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB), and investigated the correlation between morphology and electrochemical properties. NiCo-LDH-SDS with a layered structure exhibited a specific capacitance of 1004 C g-1 at 1 A g-1, which is higher than that of the needle-like NiCo-LDH-CTAB (678 C g-1) and the rod-like NiCo-LDH (279 C g-1). Meanwhile, NiCo-LDH-SDS and NiCo-LDH-CTAB showed a reduction of 36 and 19mV, respectively, in their overpotentials at 10mA cm-2 compared to NiCo-LDH. Contact angle and adhesive force measurements proved the influence of morphology on the interfacial properties that layered structure is favorable for the timely detachment of the bubbles. Therefore, rational morphology regulation of LDH can effectively alter the gas-liquid-solid interface and thereby accelerate the reaction kinetics. The connections between morphologies, bubbles releasing and electrochemical performance are well established in this work, which can be applied in the investigation of nanomaterials for energy-related activities, especially the ones concerning bubbles releasing processes.

Biocompatible, porous hydrogels composed of aliphatic polyesters and poly(2-isopropenyl-2-oxazoline). Their application as scaffolds for bone tissue regeneration.

In this study, porous networks were efficiently prepared by crosslinking hydrophilic poly(2-isopropenyl-2-oxazoline) (PiPOx) with dicarboxylic polyesters (HOOC-PLA-COOH or HOOC-PCL-COOH) in the presence of sodium chloride as a water-soluble porogen. Importantly, by using a relatively simple synthetic protocol, the resulting spongy materials were freely formed to the desired size and shape while maintaining stable dimensions. According to the SEM data, the porous 3D structure can be altered by the pore dimensions, which are dependent on the porogen crystal size. After porosity characterization, the mechanical properties were also evaluated via uniaxial compression and tensile tests. The porous networks formed hydrogels with a high water absorption capacity. Finally, after showing cytocompatibility by the MTT assay, we also demonstrated the applicability of the porous hydrogels as scaffolds for cell cultivation. The presented results suggest that this type of hydrogels is a promising material for tissue engineering.

Customized Li+ Solvation Sheath at the Poly(ethylene oxide)-Based Electrolyte/Ultrahigh-Nickel Cathode Interface toward Room-Temperature Solid-State Lithium Batteries.

The matching of poly(ethylene oxide) (PEO)-based electrolytes with ultrahigh-nickel cathode materials is crucial for designing new-generation high-energy-density solid-state lithium metal batteries (SLMBs), but it is limited by serious interfacial side reactions between PEO and ultrahigh-nickel materials. Here, a high-concentration electrolyte (HCE) interface with a customized Li+ solvation sheath is constructed between the cathode and the electrolyte. It induces the formation of an anion-regulated robust cathode/electrolyte interface (CEI), reduces the unstable free-state solvent, and finally achieves the compatibility of PEO-based electrolytes with ultrahigh-nickel cathode materials. Meanwhile, the corrosion of the Al current collector caused by lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) ions is prevented by lithium difluoro(oxalato)borate (LiDFOB) ions. The synergistic effect of the double lithium salt is achieved by a well-tailored ratio of TFSI- and DFOB- in the first solvation sheath of Li+. Compared with reported PEO-based SLMBs matched with ultrahigh-nickel (Ni ≥ 90%) cathodes, the SLMB in this work delivers a high discharge specific capacity of 216.4 mAh g-1 (0.1C) even at room temperature. This work points out a direction to optimize the cathode/electrolyte interface.

Salt-Assisted Recovery of Sodium Metal Anodes for High-Rate Capability Sodium Batteries.

Rechargeable sodium metal batteries are considered to be one of the most promising high energy density and cost-effective electrochemical energy storage systems. However, their practicality is constrained by the high reactivity of sodium metal anodes that readily brings about excessive accumulation of inactive Na species on the surface, either by chemical reactions with oxygen and moisture during electrode handling or through electrochemical processes with electrolytes during battery operation. Herein, this paper reports on an alkali, salt-assisted, assembly-polymerization strategy to recover Na activity and to reinforce the solid-electrolyte interphase (SEI) of sodium metal anodes. To achieve this, an alkali-reactive coupling agent 3-glycidoxypropyltrimethoxysilane (GPTMS) is applied to convert inactive Na species into Si-O-Na coordination with a self-assembly GPTMS layer that consists of inner O-Si-O networks and outer hydrophobic epoxides. As a result, the electrochemical activity of Na metal anodes can be fully recovered and the robust GPTMS-derived SEI layer ensures high capacity and long-term cycling under an ultrahigh rate of 30 C (93.1 mAh g-1, 94.8% after 3000 cycles). This novel process provides surface engineering clues on designing high power density and cost-effective alkaline metal batteries.

Immobilization and Catalytic Conversion of Polysulfide by In-Situ Generated Nickel in Hollow Carbon Fibers for High-Rate Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries are considered promising energy-storage systems because of their high theoretical energy density, low cost, and eco-friendliness. However, problems such as the shuttle effect can result in the loss of active materials, poor cyclability, and rapid capacity degradation. The utilization of a structural configuration that enhances electrochemical performance via dual adsorption-catalysis strategies can overcome the limitations of Li-S batteries. In this study, an integrated interlayer structure, in which hollow carbon fibers (HCFs) were modified with in-situ-generated Ni nanoparticles, was prepared by scalable one-step carbonization. Highly hierarchically porous HCFs act as the carbon skeleton and provide a continuous three-dimensional conductive network that enhances ion/electron diffusion. Ni nanoparticles with superior anchoring and catalytic abilities can prevent the shuttle effect and increase the conversion rate, thereby promoting the electrochemical performance. This synergistic effect resulted in a high capacity retention of 582 mAh g-1 at 1 C after 100 cycles, providing an excellent rate capability of up to 3 C. The novel structure, wherein Ni nanoparticles are embedded in cotton-tissue-derived HCFs, provides a new avenue for enhancing electrochemical performance at high C rates. This results in a low-cost, sustainable, and high-performance hybrid material for the development of practical Li-S batteries.

Lithium-modified B3C2P3 monolayer as a promising medium for reversible hydrogen storage

Although two-dimensional (2D) materials have been extensively studied as hydrogen storage media, the search for 2D materials with high hydrogen storage capacity and reversible hydrogen storage properties at room temperature remains challenging. In this context, B3C2P3 monolayer with Li modification is studied systematically by first-principles calculation. We find that Li-modified B3C2P3 monolayer can achieve a high hydrogen storage capacity of 8.99 wt% with an average adsorption energy of −0.23 eV/H2. Three of the H2 molecules are adsorbed around the Li atom, while the fourth H2 molecule is adsorbed above the buckled P atom due to the constricted space around the Li atom. Not only metal Li atoms but also the buckled substrate plays an important role in hydrogen adsorption, indicating that buckled 2D materials are more interesting and promising in hydrogen storage than flat 2D materials. The average desorption temperature (TD) calculated by van't Hoff formula is 293.84 K, which is very close to room temperature. In addition, at room temperature, the structure of hydrogen adsorption is stable at a low pressure of 3.21 MPa, suggesting a broad application prospect of in reversible hydrogen storage.

A 3D conducting scaffold with lithiophilic carbon nanoparticles for stable lithium metal battery anodes

Li metal anode with high capacity, negative potential and low density is regarded as the most promising anode material. Unfortunately, its commercialization is greatly limited by Li dendrites. Here, a 3D carbon paper scaffold with lithiophilic carbon nanoparticles is synthesized as a Li host via the carbonization of metal-organic framework and the doping of oxygen atom. Carbon nanoparticles effectively improve the specific surface area of carbon paper that can low the local current density and provide rich internal spaces for Li reservoir. In addition, the rich lithiophilic groups (such as ZnO, nitrogen atom and oxygen atom) can regulate a uniform Li+ flux and achieve a controllable Li deposition. Based on these structural advantages, uniform nucleation and growth of Li metal have been realized. Especially, the symmetric cell renders an outstanding cyclic stability for 750 h with an ultra-low polarization voltage of 14 mV at 1 mA/cm2. Additionally, the full cell partied with a LiFePO4 cathode displays an initial specific capacity of 138.1 mAh/g, and even maintains 97.7 % capacity retention after 120 cycles at 0.5C. Therefore, this strategy presents a universal approach to construct porous hosts with abundant lithiophilic sites for long-lifespan Li metal batteries.

Regulation of Zn2+ Solvation Configuration in Aqueous Batteries via Selenium-Substituted Crown Ether Engineering.

The efficient utilization of the metallic Zn in rechargeable aqueous Zn-ion batteries (RAZBs) struggle to suffer from parasitic Zn dendrite formation, hydrogen evolution reactions as well as severe interfacial degradation at high areal capacity loadings. This study thus proposes to employ the modified crown ether as an aqueous electrolyte additive to regulate the Zn2+ desolvation kinetic and facilitates the horizontally oriented (002) deposition of Zn, extending the lifespan of both the symmetric cell and full cell models. Specifically, zincophilic cyano and hydrophobic selenium atoms are incorporated into the crown ether supramolecule to enhance Zn2+ coordination and desolvation capability. The addition of 4-cyanobenzo-21-crown-7-selenium at a low concentration of 0.5 wt.% effectively mitigates hydrogen evolution and Zn corrosion caused by water, promoting the oriented deposition of Zn2+. The Zn||V2O5 full cell prototype, assembled with the areal capacity loadings of 2 mAh cm-2 and N/P ratio of 2.95, exhibits negligible capacity fading at 2.0A g-1 for 300 cycles, highlighting the commercial feasibility of supramolecular macrocycles additive for practical RAZBs applications.

Watering the trees for the forest: Drought alleviation in oaks and pines by ancestral ditches

Traditional ditches (“acequias” in Spanish) derive meltwater and infiltrate groundwater providing ecological services downstream in the semi-arid Sierra Nevada range (SE Spain). Therefore, they may act as a nature-based solution by alleviating drought stress in trees growing near ditches by enhancing growth and reducing their intrinsic water-use efficiency (iWUE). Such a mitigation role of acequias is critical given that some oak (Quercus pyrenaica) and pine (Pinus sylvestris) stands reach their xeric distribution limits in Europe. We compared tree-ring width data and wood δ13C, a proxy of iWUE, in oak and pine stands located near or far (control) from ditches with different infiltration capacity in two watersheds. We assessed how trees responded to climate data, drought stress, and vegetation greenness through correlations and resilience indices. Oak trees located near ditches grew more and responded less to precipitation, soil moisture, a drought index, and greenness than control trees. In pines, we did not find this pattern, and ditch trees grew more than control trees only during an extremely dry year (1995). Climate-growth correlations suggested a longer growing season in ditch pines. Growth of ditch oaks from the “Acequia Nueva” (AN), with high infiltration capacity, responded more to autumn soil moisture and showed the lowest δ13C. Growth was enhanced by cool-wet spring conditions in pines and also by warm-wet conditions in the prior winter in the case of oaks. Control trees showed lower resistance to drought. Control trees presented higher wood δ13C values except for old oaks from the “Acequia Grande” (AG) site which may show long-term acclimation. Traditional ditches alleviate drought stress in oak and pine stands subjected to regional xeric climate conditions.

Characterization of Particulate Emissions From Thermal Runaway of Lithium-Ion Cells

Abstract Over the past decade, there has been a significant acceleration in the adoption of lithium-ion (Li-ion) batteries for various applications, ranging from portable electronics to automotive, defense, and aerospace applications. Lithium-ion batteries are the most used energy storage technologies due to their high energy densities and capacities. However, this battery technology is a potential safety hazard under off-nominal conditions, which may result in thermal runaway events. Such events can release toxic gaseous and particulate emissions, posing a severe risk to human health and the environment. Particulate emissions from the failure of two different cell chemistries—lithium iron phosphate (LFP) and nickel manganese cobalt oxide (NMC)—were studied. Experiments were conducted at multiple states of charge (SOC), and three repeats were performed at each SOC for each cell chemistry to examine the repeatability/variability of these events. Particulate emissions were characterized in terms of particulate matter mass (PM2.5), black carbon, and particle number (PN)/size. Failure of a single cell led to a significant release of particulate emissions, with peak emission levels being higher at the higher SOCs. A high level of variability was observed for a specific SOC for LFP cells, while NMCs exhibited relatively less variability. In general, much higher particulate emissions were observed for NMCs compared to LFPs at each SOC. For NMCs at 100% SOC, peak PN levels were ∼2.5 × 10+09 particles/cc (part/cc), and black carbon levels were ∼60 mg/m3. For LFPs at 100% SOC, peak PN levels were ∼9.0 × 10+08 part/cc, and black carbon levels were 2.5 mg/m3.