High Accuracy Research Articles

Handheld echocardiography for the screening and diagnosis of rheumatic heart disease: a systematic review to inform WHO guidelines

Early detection and diagnosis of acute rheumatic fever and rheumatic heart disease are key to preventing progression, and echocardiography has an important diagnostic role. Standard echocardiography might not be feasible in high-prevalence regions due to its high cost, complexity, and time requirement. Handheld echocardiography might be an easy-to-use, low-cost alternative, but its performance in screening for and diagnosing acute rheumatic fever and rheumatic heart disease needs further investigation. In this systematic review and meta-analysis, we searched Embase, MEDLINE, LILACS, and Conference Proceedings Citation Index-Science up to Feb 9, 2024, for studies on the screening and diagnosis of acute rheumatic fever and rheumatic heart disease using handheld echocardiography (index test) or standard echocardiography or auscultation (reference tests) in high-prevalence areas. We included all studies with useable data in which the diagnostic performance of the index test was assessed against a reference test. Data on test accuracy in diagnosing rheumatic heart disease, acute rheumatic fever, or carditis with acute rheumatic fever (primary outcomes) were extracted from published articles or calculated, with authors contacted as necessary. Quality of evidence was appraised using GRADE and QUADAS-2 criteria. We summarised diagnostic accuracy statistics (including sensitivity and specificity) and estimated 95% CIs using a bivariate random-effects model (or univariate random-effects models for analyses including three or fewer studies). Area under the curve (AUC) was calculated from summary receiver operating characteristic curves. Heterogeneity was assessed by visual inspection of plots. This study was registered with PROSPERO (CRD42022344081). Out of 4868 records we identified 11 studies, and two additional reports, comprising 15 578 unique participants. Pooled data showed that handheld echocardiography had high sensitivity (0·87 [95% CI 0·76-0·93]), specificity (0·98 [0·71-1·00]), and overall high accuracy (AUC 0·94 [0·84-1·00]) for diagnosing rheumatic heart disease when compared with standard echocardiography (two studies; moderate certainty of evidence), with better performance for diagnosing definite compared with borderline rheumatic heart disease. High sensitivity (0·79 [0·73-0·84]), specificity (0·85 [0·80-0·89]), and overall accuracy (AUC 0·90 [0·85-0·94]) for screening rheumatic heart disease was observed when pooling data of handheld echocardiography versus standard echocardiography (seven studies; high certainty of evidence). Most studies had a low risk of bias overall. Some heterogeneity was observed for sensitivity and specificity across studies, possibly driven by differences in the prevalence and severity of rheumatic heart disease, and level of training or expertise of non-expert operators. Handheld echocardiography has a high accuracy and diagnostic performance when compared with standard echocardiography for diagnosing and screening of rheumatic heart disease in high-prevalence areas. World Health Organization. For the Chinese, French, Italian, Persian, Portuguese, Spanish and Urdu translations of the abstract see Supplementary Materials section.

Depression recognition over fusion of visual and vocal expression using artificial intelligence

<div class="WordSection1"><p>Depression is a mental illness that usually goes untreated in people and can have catastrophic consequences, including suicidal thoughts. Counselling services are widely available, but because depression is a stigmatized illness, many people who are depressed decide not to seek help. Therefore, it is essential to develop an automated system that can recognize depression in individuals before it worsens. In this study, a novel approach is proposed for identifying depression using a combination of visual and vocal emotions. Long short-term memory (LSTM) is used to assess verbal expressions and convolutional neural networks (CNN) to analyze facial expressions. The proposed system is trained using features of depression from the distress analysis interview corpus (DAIC) dataset and tested on videos of college students with frontal faces. The proposed approach is effective in detecting depression in individuals, with high accuracy and reliability.</p></div>

Recent Advances in Chemistry, Mechanism, and Applications of Quantum Dots in Photodynamic and Photothermal Therapy.

Semiconductor quantum dots (QD) are a kind of nanoparticle with unique optical properties that have attracted a lot of attention in recent years. In this paper, the characteristics of these nanoparticles and their applications in nanophototherapy have been reviewed. Phototherapy, including photodynamic therapy (PDT) and photothermal therapy (PTT), has gained special importance because of its high accuracy and local treatment due to the activation of the drug at the tumor site. PDT is a new way of cancer treatment that is performed by activating light-sensitive compounds named photosensitizers (PS) by light. PSs cause the destruction of diseased tissue through the production of singlet oxygen. PTT is another non-invasive method that induces cell death through the conversion of near-infrared light (NIR) into heat in the tumor situation by the photothermal agent (PA). Through using energy transfer via the FRET (Förster resonance energy transfer) process, QDs provide light absorption wavelength for both methods and cover the optical weaknesses of phototherapy agents.

Multiple faults detection in doubly-fed induction generator wind turbine using artificial neural network

The development of fault detection methods in wind turbine (WT), especially for single fault detection, is continuously increasing. However, the rapid growth of fault detection in WT leads to another challenge where multiple faults can occur. The single fault detection method in WT is no longer reliable, especially when multiple faults occur simultaneously. Therefore, multiple faults detection in doubly-fed induction generators (DFIG) WT was proposed using an artificial neural networks (ANN) model. These multiple faults include internal and external stator faults happening simultaneously. Internal stator faults cover inter-turn short circuit faults and open circuit faults, while external stator faults cover loss of excitation and external short circuit faults. The performance of the developed multiple faults detection model was measured using accuracy and the root mean square error (RMSE) value. The results show that the developed model performs well with high accuracy and a low RMSE value. Thus, the developed model can accurately detect the coexistence of multiple faults in DFIG WT.

Clinical Predictors of Postmortem Amyloid and Nonamyloid Cerebral Small Vessel Disease in Middle-Aged to Older Adults.

Sporadic cerebral small vessel disease (CSVD) is a class of important pathologic processes known to affect the aging brain and to contribute to cognitive impairment. We aimed to identify clinical risk factors associated with postmortem CSVD in middle-aged to older adults. We developed and tested risk models for their predictive accuracy of a pathologic diagnosis of nonamyloid CSVD and cerebral amyloid angiopathy (CAA) in a retrospective sample of 160 autopsied cases from the Edinburgh Brain Bank. Individuals aged 40 years and older covering the spectrum of healthy aging and common forms of dementia (i.e., highly-prevalent etiologies such as Alzheimer disease (AD), vascular cognitive impairment (VCI), and mixed dementia) were included. We performed binomial logistic regression models using sample splitting and cross-validation methods. Demographics, lifestyle habits, traditional vascular risk factors, chronic medical conditions, APOE4, and cognitive status were assessed as potential predictors. Forty percent of our sample had a clinical diagnosis of dementia (AD = 33, VCI = 26 and mixed = 5) while others were cognitively healthy (n = 96). The mean age at death was 73.8 (SD 14.1) years, and 40% were female. The presence of none-to-mild vs moderate-to-severe nonamyloid CSVD was predicted by our model with good accuracy (area under the curve [AUC] = 0.84, sensitivity [SEN] = 72%, specificity [SPE] = 95%), with the most significant clinical predictors being age, history of cerebrovascular events, and cognitive impairment. The presence of CAA pathology was also predicted with high accuracy (AUC = 0.86, SEN = 93%, SPE = 79%). Significant predictors included alcohol intake, history of cerebrovascular events, and cognitive impairment. In a subset of atypical dementias (n = 24), our models provided poor predictive performance for both nonamyloid CSVD (AUC = 0.50) and CAA (AUC = 0.43). CSVD pathology can be predicted with high accuracy based on clinical factors in patients within the spectrum of AD, VCI, and normal aging. Whether this prediction can be enhanced by the addition of fluid and neuroimaging biomarkers warrants additional study. Improving our understanding of clinical determinants of vascular brain health may lead to novel strategies in the prevention and treatment of vascular etiologies contributing to cognitive decline. This study provides Class II evidence that selected clinical factors accurately distinguish between middle-aged to older adults with and without cerebrovascular small vessel disease (amyloid and nonamyloid) pathology.

Hybrid optimal feature selection approach for internet of things based medical data analysis for prognosis

<p>Healthcare is very important application domain in internet of things (IoT). The aim is to provide a novel combined feature selection (FS) methods like univariate (UV) with tree-based methods (TB), recursive feature elimination (RFE) with least absolute shrinkage selection operator (LASSO), mutual information (MI) with genetic algorithm (GA) and embedded methods (EM) with univariate has been applied to internet of medical things (IoMT)based heart disease dataset. The well-suited machine learning algorithms for IoT medical data are logistic regression (LR) and support vector machine (SVM). Each combined method has been applied to the machine learning algorithms to find the best classifier for prognosis. The various performance metrices has been calculated for all the combined feature selection methods for logistic regression and support vector machine and found that for precise classification could be done using recursive elimination feature selection method with LASSO applied to logistic regression achieved a better performance than all other combined methods with high accuracy, sensitivity and high area under curve. Decision has been taken by data analytics that RFE+LASSO using LR feature selection method will provide an overall better performance for IoT based medical heart disease dataset after comparing all other combined methods with LR and SVM classifiers<em>. </em></p>

Identification and analysis of oncogenic non-synonymous single nucleotide polymorphisms in the human NRAS gene: An exclusive in silico study

BackgroundN-ras protein is encoded by the NRAS gene and operates as GDP-GTP-controlled on/off switching. N-ras interacts with cellular signaling networks that regulate various cellular activities including cell proliferation and survival. The nonsynonymous single nucleotide polymorphism (nsSNPs)-mediated alteration can substantially disrupt the structure and activity of the corresponding protein. N-ras has been reported to be associated with numerous diseases including cancers due to the nsSNPs. A comprehensive study on the NRAS gene to unveil the potentially damaging and oncogenic nsSNPs is yet to be accomplished. Hence, this extensive in silico study is intended to identify the disease-associated, specifically oncogenic nsSNPs of the NRAS gene. ResultsOut of 140 missense variants, 7 nsSNPs (I55R, G60E, G60R, Y64D, L79F, D119G, and V152F) were identified to be damaging utilizing 10 computational tools that works based on different algorithms with high accuracy. Among those, G60E, G60R, and D119G variants were further filtered considering their location in the highly conserved region and later identified as oncogenic variants. Interestingly, G60E and G60R variants were revealed to be particularly associated with lung adenocarcinoma, rhabdomyosarcoma, and prostate adenocarcinoma. Therefore, D119G could be subjected to detailed investigation for identifying its association with specific cancer. ConclusionThis in silico study identified the deleterious and oncogenic missense variants of the human NRAS gene that could be utilized for designing further experimental investigation. The outcomes of this study would be worthwhile in future research for developing personalized medicine.

Stereo matching algorithm using deep learning and edge-preserving filter for machine vision

Machine vision research began with a single-camera system, but these systems had various limitations from having just one point-of-view of the environment and no depth information, therefore stereo cameras were invented. This paper proposes a hybrid method of a stereo matching algorithm with the goal of generating an accurate disparity map critical for applications such as 3D surface reconstruction and robot navigation to name a few. Convolutional neural network (CNN) is utilised to generate the matching cost, which is then input into cost aggregation to increase accuracy with the help of a bilateral filter (BF). Winner-take-all (WTA) is used to generate the preliminary disparity map. An edge-preserving filter (EPF) is applied to that output based on a transform that defines an isometry between curves on the 2D image manifold in 5D and the real line to eliminate these artefacts. The transform warps the input signal adaptively to allow linear 1D filtering. Due to the filter's resistance to high contrast and brightness, it is effective in refining and removing noise from the output image. Based on experimental research employing a Middlebury standard validation benchmark, this approach gives high accuracy with an average non-occluded error of 6.71% comparable to other published methods.

Research on vibration fatigue behavior of blade structures based on infrared thermography

In recent years, infrared thermography has been widely used in mechanical testing because of its non-contact, rapidity and high accuracy. In order to explore the advantages of infrared thermography in vibration fatigue monitoring of blade structures, the characterization of the vibration fatigue behavior of blade structures is carried out based on infrared thermography with the validation and assistance of laser vibrometry. Firstly, the numerical simulation and experimental analysis were used to determine the size and location of the maximum stress in blade structures. Afterwards, the linear relationship between the stress and amplitude(σν-A curve) of blade structures was calibrated by laser vibrometry, and thus the S-N curve was fitted. Eventually, the heat dissipation law and crack extension process for vibration fatigue of blade structures was analyzed by infrared thermography, and the fatigue limit of the blade structure was predicted by combining infrared thermography and the Luong bilinear method. It is shown that the heat dissipation law and crack extension process for vibration fatigue of blade structures can be effectively analyzed by infrared thermography. Infrared thermography saves some economic and time costs for fatigue limit prediction, and the method is within 2.6% of the results predicted by the Basquin model. This paper provides a certain reference basis for the research methodology for vibration fatigue behavior of blade structures.

Xác định acetamiprid bằng phương pháp quang học sử dụng dung dịch nano vàng được ổn định bằng Polydiallyldimethylammoni clorua

On this research, the development of a simple, cost-efective and highly sensitive spectrophotometric method for acetamiprid detection based on the localized surface plasmon resonance of polydiallyldimethylammonium chloridestabilized gold nanoparticles. By naked eyes, one can detect acetamiprid by the visual change of gold solution color from red to purple, corresponding to the shift of maximum absorbance wavelength in the UV-Vis spectrum. Quantification of acetamiprid is possible through a linear relationship between the maximum absorbance wavelength and the acetamiprid concentrations in the range of 8×10-8 -2×10-6 M. Under the optimum conditions including pH 5, NaCl concentration of 0.02 M and incubation time 20 min, the present method has high precision (RSD < 5%), very low limit of detection (LOD) of 2.7×10-8 M, limit of quantification (LOQ) of 8.2×10-8 M. This method has been successfully applied to determine acetamiprid in several pesticide samples and vegetable samples. The measurement results of acetamiprid in the pesticide samples of the research method with the HPLC-UV method showed a difference of < 2%, while for the vegetable sample, the difference between the research method and the LC-MS/method method/ MS < 5% shows that the method has high accuracy and reliability.

An Artificial Intelligence-based Tool to Predict “Unhealthy” Wine and Olive Oil

The application of Artificial Intelligence (AI) in the agri-food industry has witnessed significant advancements, particularly in healthy food, quality assessment, and geographical origin determination of agri-products such as wine and olive oils, whose international market is constantly growing. This paper explores the applicability of Machine Learning (ML) models for predicting “unhealthy” wines and olive oils. As for the healthy factor, two main characteristics of wines and olive oils were evaluated: their quality and their geographical origin. In the study, 3 ML algorithms were compared (Random Forest, Linear Discriminant Analysis, and K-Nearest Neighbors) to predict just by observing their chemical characteristics: i) the quality of red and white wine and ii) the geographical origins of wine and olive oils. Real datasets were used for these case studies. The Synthetic Minority Over-sampling Technique (SMOTE) was used to manage imbalanced data, and well-adopted AI metrics were collected to evaluate the accuracy of the predictions made by the 3 ML algorithms. 3 datasets were analyzed: dataset #01 contains ∼7000 data entries related to 2 types of wine (red and white Portuguese wines) and 11 wine’s chemical characteristics; dataset #02 contains 178 data entries related to 3 different Italian vineyards and 13 wine’s chemical characteristics; dataset #03 contains 572 data entries related to 9 different Italian geographical regions for olive oil and 7 fatty acid characteristics. A total of ∼7700 data points, 5 wines and 9 olive oil types, and 31 chemical characteristics were analyzed. 12 quality metrics were collected per each dataset analysis. The designed ML models achieved good accuracy (>0.65) in predicting the wine quality, a very high accuracy (>0.99) in predicting its vineyard, and a very good accuracy (>0.97) in predicting the origin of olive oil. Moreover, an AI-based tool has been developed that stakeholders can use to predict the quality and geographical origin of wine and olive oil to avoid possible fraudulent and unhealthy product labels. The obtained prediction results showcase AI and ML's potential to help the agri-food industry, providing valuable insights and innovations for producers, distributors, and consumers alike. Integrating AI and ML in the agri-food industry may enhance product quality, consumer trust, and market transparency.

EV Battery Management using Adaptive Kalman Filter and ECC

This initiative addresses the critical concerns of enhancing battery management and easing the calculation of battery capacity in electric vehicles. By using Coulomb counting method, the State of Charge (SoC) of Electric Vehicle (EV) batteries is estimated by analysing real-time battery data through simulations and interpolation techniques. The primary objective is to offer precise SoC estimation to mitigate the range anxiety. Furthermore, this research proposes methods of estimating the SoC of Lithium-Ion batteries and an enhanced coulomb counting model with Adaptive Kalman Filter to estimate the state of charge with higher accuracy. This comprehensive approach seeks to address critical challenges in EV battery management contributing significantly to the electric vehicle technology for the society.

Comparative analysis of machine learning models for breast cancer prediction and diagnosis: a dual-dataset approach

<p>Breast cancer is ranked as a significant cause of mortality among females globally. Its complex nature poses principal challenges for physicians and researchers for rapid diagnosis and prognosis. Hence, machine learning algorithms are employed to forecast and identify diseases. This study discusses the comparative analysis of seven machine learning models, e.g., logistic regression (LR), support vector machine (SVM), k-nearest neighbor classifier (KNN), decision tree classifier (DT), random forest classifier (RF), Naïve Bayes (NB), and artificial neural network (ANN) to predict breast cancer using Wisconsin breast cancer and breast cancer datasets. In the Wisconsin breast cancer dataset, KNN depicted 99% accuracy, followed by RF (98%), SVM (96%), NB (96%), LR (96%), ANN (93%), and DT (92%). On the contrary, in the breast cancer (BC) dataset, the highest accuracy was achieved by LR at 83%, and the lowest was achieved by DT (65%), which depicted that the numeric dataset WBC has better accuracy than the breast cancer dataset.</p>

Ultra-Efficient Low-Power Retinal Nano Electronic Circuit for Edge Enhancement and Detection Using 7 nm FinFET Technology

Ultra-Efficient Low-Power Retinal Nano Electronic Circuit for Edge Enhancement and Detection Using 7 nm FinFET Technology

Sustainability insights on learning-based approaches in precision agriculture in internet-of-things

Precision agriculture (PA) is meant to automate the complete agricultural processes with the sole target of enhanced crop yield with reduced cost of operation. However, deployment of PA in internet of things (IoT) based architecture demands solutions towards addressing various challenges where most are related to proper and precise predictive management of agricultural data. In this perspective, it is noted that learning-based approaches have made some contributory success towards addressing different variants of issues in PA; however, such methods suffer from certain loopholes, primarily related to the non-inclusion of practical constraints of IoT infrastructure in PA and lack of emphasis towards bridging the trade-off between higher accuracy and computational burden that is eventually associated with this. This paper contributes towards highlighting the strengths and weaknesses of recent learning approaches and contributes towards novel findings.

A comparative analysis of convolutional neural networks for breast cancer prediction

Breast cancer continues to be a substantial worldwide health concern, affecting millions of individuals each year; this emphasizes the critical nature of early detection in order to enhance patient prognoses. The present study aims to assess the classification performance of three convolutional neural network (CNN) architectures-visual geometry group 19 (VGG19), AlexNet, and residual network 50 (ResNet50)-with respect to breast cancer detection in medical images. Thorough assessments, encompassing metrics such as accuracy, precision, recall, and F-score, were undertaken to evaluate the diagnostic performance of the models. ResNet50 consistently outperforms other models, as evidenced by its highest accuracy and F-score. The research highlights the significant importance of carefully choosing suitable architectures for medical image analysis, with a specific focus on the detection of breast cancer. In addition, it demonstrates the capacity of deep learning models, such as ResNet50, to improve the diagnosis of breast cancer with exceptional precision and sensitivity, which is critical for reducing the occurrence of false positives and negatives in clinical environments. In addition, computational efficiency is taken into account; AlexNet is recognized as the most efficient model, which is advantageous in environments with limited resources. This study advances medical image processing by demonstrating the potential of CNNs in the detection of breast cancer. The results of this study establish a fundamental basis for sub- sequent inquiries and suggest approaches to improve timely detection and treatment, which will ultimately be advantageous for both patients and healthcare professionals.

Object detection of the bornean orangutan nests using drone and YOLOv5

<p class="tm6">Object detection methods when applied to ecology and conservation can help to identify and monitor endangered species and their habitats. Using drones for this purpose has become increasingly popular due to their ability to cover large areas quickly and efficiently. In this study, we aim to implement object detection using YOLOv5 to detect orangutan nests in forests. To conduct our experiment, we collect drone imagery under different conditions. We propose to use the original YOLOv5 to implement our model. The detection and monitoring of orangutan nests can help conservationists to identify critical habitats, monitor population, and design effective conservation strategies. Additionally, the use of drones can reduce the need for on-the-ground surveys, which can be time-consuming, expensive, and logistically challenging. In our study proposes a model for detecting orangutan nests in forests using a drone and the YOLOv5. Our model predicted 1,970 training images and 414 labeled orangutan nests, with a precision of 0.973, recall 0.949, accuracy mean average precision (mAP)_0.5 is 0.969, and mAP_0.5:0.95 is 0.630. The model finished 217 epochs in 58 hours and had a high object detection accuracy. The model has a 99.9% accuracy in detecting the number of orangutan nests.</p>

Laser-induced graphene decorated with Ni[sbnd]Pt alloy nanoparticles for non-enzymatic electrochemical quantification of glucose

Enzyme-free electrochemical glucose (Glu) sensors, adopting electrochemically active catalysts, are of vital significance to effectively monitoring and analyzing the blood Glu level in diabetes diagnosis. Meanwhile, developing novel electrode substrates have been the hot research pot to meet the demand for constructing flexible sensors. In this work, porous laser-induced graphene (LIG) was prepared through a facile one-step laser-engraving technique on a polyimide thin film, and then used directly as the electrode. Furthermore, NiPt alloyed nanoparticles (NPs) were electrodeposited on the LIG electrode surface to gain the NiPt/LIG composite electrode, which was applied to construct the nonenzymatic electrochemical Glu sensor. The morphology, element and electrochemical performance of NiPt/LIG composite was characterized through various techniques. NiPt alloyed NPs were homogeneously distributed on the LIG scaffolds, which possess plenty of porous structure, high surface area and many active sites. The cooperative effect between the outstanding electrocatalytic capacity of NiPt alloyed NPs, the extraordinary electroconductibility of LIG and the numerous exposed active sites endow the NiPt/LIG sensor outstanding electrocatalytic performance for electrochemical oxidation of Glu. Under the most appropriate conditions, the obtained NiPt/LIG sensor was adopted to detect Glu, showing a broad detection concentration range of 0.5 μM to 2.1 mM and 2.1 mM to 5.6 mM, good sensitivities of 1.824 and 0.467 μA μM−1 cm−2, a low detection limit of 0.03 μM. The as-fabricated nonenzymatic Glu sensor also displays high selectivity, stability considering ageing effects under different environment conditions and prominent reproducibility. Additionally, this novel NiPt/LIG nonenzymatic Glu sensor was applied to quantify Glu successfully in blood serum and food samples and the results were in good agreement with that by UV–vis spectrophotometer, demonstrating high precision and accuracy as well as excellent recovery, showing good application prospects in Glu monitoring. This research confirmed the potential of exploiting NiPt/LIG as a highly sensitive Glu nonenzymatic electrochemical sensor and provided a practicable and suitable approach for construction of novel electrochemical sensors.

BPJDet: Extended Object Representation for Generic Body-Part Joint Detection.

Detection of human body and its parts has been intensively studied. However, most of CNNs-based detectors are trained independently, making it difficult to associate detected parts with body. In this paper, we focus on the joint detection of human body and its parts. Specifically, we propose a novel extended object representation integrating center-offsets of body parts, and construct an end-to-end generic Body-Part Joint Detector (BPJDet). In this way, body-part associations are neatly embedded in a unified representation containing both semantic and geometric contents. Therefore, we can optimize multi-loss to tackle multi-tasks synergistically. Moreover, this representation is suitable for anchor-based and anchor-free detectors. BPJDet does not suffer from error-prone post matching, and keeps a better trade-off between speed and accuracy. Furthermore, BPJDet can be generalized to detect body-part or body-parts of either human or quadruped animals. To verify the superiority of BPJDet, we conduct experiments on datasets of body-part (CityPersons, CrowdHuman and BodyHands) and body-parts (COCOHumanParts and Animals5C). While keeping high detection accuracy, BPJDet achieves state-of-the-art association performance on all datasets. Besides, we show benefits of advanced body-part association capability by improving performance of two representative downstream applications: accurate crowd head detection and hand contact estimation.

Techniques for detecting and masking faults in semantic segmentation applications

Semantic segmentation of images is essential for many applications including autonomous driving and modern DNNs now achieve high accuracy. Automotive systems are safety critical systems and in turn they must comply with safety standards, requiring at least hardware fault detection capability. Small embedded applications also require some level of fault tolerance, while operating with a tight power budget. In this paper, we first present a detailed analysis of the effects of faults using Google’s DeepLabV3+ network processing an industrial data-set. Further to that, two techniques to mitigate hardware faults are proposed. The first one is a symptom-based fault detection algorithm shown to detect >99% of critical faults with zero false positives and a compute overhead of 0.2%. The second one is a simpler technique, using a clipped ReLU activation function, to quickly mask over 99% of the critical faults in the activation values.