High Yield Research Articles

Development of a new series of thioacetal based fluorescence chemosensors for highly sensitive determination of Hg2+ in environmental samples and cell imaging

Mercury ion is one of the most harmful metal ions with significant hazards to the environment and human health. Thus, the development of innovative, sensitive, and selective sensors to help address the detrimental impacts of heavy metal contamination is necessary. In this work, we present three new chemosensors based on the deprotection reaction of the thioacetal group for distinguishing Hg2+ in environmental samples. These chemosensors show good photophysical properties with high quantum yield in aqueous medium. These prepared chemosensors were employed as fluorometric sensors for the determination of Hg2+ through the quenching of fluorescence emission due to the Hg2+-induced hydrolysis of the thioacetal to the aldehyde group. In the presence of Hg2+, chemosensors showed an emissive color transformation from blue fluorescence to non-fluorescence under UV light, which was readily seen by the visual eye. These chemosensors also exhibited highly distinctive selectivity toward Hg2+ over other interfering metal ions, with detection limits of 1.1 ppb, 13.4 ppb, and 12.7 ppb. Moreover, the practical applicability of chemosensor was successfully demonstrated in real water samples and herb extract samples.

Integrating molecular and radiological screening tools during community-based active case-finding for tuberculosis and COVID-19 in southern Africa

ObjectivesTo evaluate diagnostic yield and feasibility of integrating testing for TB and COVID-19 using molecular and radiological screening tools during community-based active case-finding (ACF). MethodsCommunity-based participants with presumed TB and/or COVID-19 were recruited using a mobile clinic. Participants underwent simultaneous point-of-care (POC) testing for TB (sputum; Xpert-Ultra) and COVID-19 (nasopharyngeal swabs; Xpert-SARS-CoV-2). Sputum culture and SARS-CoV-2 RT-PCR served as reference standards. Participants underwent ultra-portable POC chest-radiography with computer-aided detection (CAD). TB infectiousness was evaluated using smear microscopy, cough aerosol sampling studies (CASS), and chest radiographic cavity detection. Feasibility of POC testing was evaluated via user-appraisals. Results601 participants were enrolled, with 144/601 (24.0%) reporting symptoms suggestive of TB and/or COVID-19. 16/144 (11.1%) participants tested positive for TB, while 10/144 (6.9%) tested positive for COVID-19 (2/144 [1.4%] had concurrent TB/COVID-19). 7/16 (43.8%) individuals with TB were probably infectious. Test-specific sensitivity and specificity (95% CI) were: Xpert-Ultra 75.0% (42.8-94.5) and 96.9% (92.4-99.2); Xpert-SARS-CoV-2 66.7% (22.3-95.7) and 97.1% (92.7-99.2). Area-under-the-curve (AUC) for CAD4TB was 0.90 (0.82-0.97). User appraisals indicated POC Xpert to have ‘good’ user-friendliness. ConclusionsIntegrating TB/COVID-19 screening during community-based ACF using POC molecular and radiological tools is feasible, has a high diagnostic yield, and can identity probably infectious persons.

Segregation effects of doped VN and ZrN on magnetic and microstructural characteristics of FePt-based films

Segregants are essential materials for forming the complexation or granular microstructure in thin films for magnetic recording media. One such film, FePt-BN, has a metallic L10 FePt main phase as its matrix, in addition to having BN and C segregants at the grain boundaries. Amorphous BN has sufficient mechanical strength to support the columnar growth of FePt grains, however, it has a lower deposition rate resulting in columnar grains with a nonuniform aspect ratio. Moreover, some B diffuses in the interstitial site of FePt lattices. To overcome these limitations, this study added the transition nitride VN and ZrN with equal volume percentages to replace some BN segregants in FePt(BN, Ag, C) films: substantially different segregation behaviors were observed. Microstructural imaging mapping revealed that although VN segregated the FePt grains boundary, ZrN was diffused in the lattice. The FePt-BN-ZrN film thus had more disordered grains contributing to a higher in-plane magnetization and wider hard axis magnetic hysteresis loops than did FePt-BN-VN. The FePt-BN-VN film has the highest perpendicular magnetic anisotropy constant (Ku= 2.17 × 106 J/m3) and coercivity (Hc= 4 T); moreover, parallel remanence magnetization was minimal with a linear in-plane magnetization loop. The FePt-BN-VN film was sputtered directly on MgO(100) but depositing the FePt-BN-ZrN film required a 2-nm-thick FePt nucleation layer. The high atomic number of Zr and high sputter yield ratio (YN/Ymetal) of ZrN may increase the sites occupied by N, potentially affecting ZrN segregation.

Análise espacial da produtividade da cenoura irrigada em função das propriedades físicas do solo

ABSTRACT Understanding soil, plant attributes, and carrot crop dynamics is vital for optimizing site-specific management practices and enhancing crop yield and soil quality. This study aimed to ascertain the dependence and spatial variability between irrigated carrot yield and soil physical attributes in a clayey Oxisol. The research took place during the 2021 growing season in a commercial carrot production area in Campos Altos, MG, Brazil. One hundred sampling points were established within the irrigated area, distributed across a square expanse of 40,000 m², positioned at the centers of 20 × 20 m grids. The study revealed high yield in the irrigated carrot crop (99.74 t ha-1) with moderate variability. Soil attributes displayed a range of heterogeneity, ranging from low to extremely high, contingent on the variable assessed, as determined by the coefficient of variation. Among the variables exhibiting spatial dependence, particle density exhibited a minimum range of 40 m, which is recommended for further studies on irrigated carrot cultivation in a clayey Oxisol. Total soil water availability demonstrated a positive spatial correlation and proved to be the recommended variable for estimating the spatial variability of carrot crop yield.

High compressive strong-ductile tungsten-rhenium alloy via B4C addition

Tungsten-rhenium alloys with high-temperature strength and creep resistance are widely used in the cutting-edge scientific and technological sectors. However, W-5Re alloy with Re content of 5wt% shows brittleness at room temperature, limiting its aviation temperature measurement. This work provides W-5Re-xB4C (x = 0∼2.0 wt%) tungsten-rhenium alloys with high compressive performance by introducing B4C ceramic phase and regulating the B4C content. The alloys are composed of W(Re) solid solution, W2B phase and a few W2C. When increasing B4C addition, the grain size of the W(Re) matrix decreases from about 200 μm to 17 μm in W-5Re-2B4C and the content of intermetallic compounds increase to be about 12% in W-5Re-0.5B4C and 58% in W-5Re-2B4C. The W-5Re-0.5wt% B4C alloy exhibits a high yield strength of 1.19 GPa and compressive plasticity with a plastic strain of 42.50%, while the W-5Re-0.75B4C alloy has a high yield strength of 1.52 GPa and good compressive plasticity of 22.52%, obviously higher than the reported W-5Re alloys. Fine-grain strengthening from the refinement of W(Re) and second-phase strengthening from intermetallic compounds simultaneously enhance the alloys, while good deformability of W(Re) metallic phase contributes to the room-temperature plasticity. This study provides necessary data accumulation and theoretical support for the application of tungsten-rhenium alloys.

Multistimuli responsive microcapsules produced by the prilling/vibration technique for targeted colonic delivery of probiotics

This study aimed to microencapsulate the probiotic strain Lactiplantibacillus plantarum 4S6R (basonym Lactobacillus plantarum) in both microcapsules and microspheres by prilling/vibration technique. A specific polymeric mixture, selected for its responsiveness to parallel colonic stimuli, was individuated as a carrier of microparticles. Although the microspheres were consistent with some critical quality parameters, they showed a low encapsulation efficiency and were discarded. The microcapsules produced demonstrated high yields (97.52%) and encapsulation efficiencies (90.06%), with dimensional analysis and SEM studies confirming the desired size morphology and structure. The results of thermal stress tests indicate the ability of the microcapsules to protect the probiotic. Stability studies showed a significant advantage of the microcapsules over non-encapsulated probiotics, with greater stability over time. The release study under simulated gastrointestinal conditions demonstrated the ability of the microcapsules to protect the probiotics from gastric acid and bile salts, ensuring their viability. Examination in a simulated faecal medium revealed the ability of the microcapsules to release the bacteria into the colon, enhancing their beneficial impact on gut health. This research suggests that the selected mixture of reactive polymers holds promise for improving the survival and efficacy of probiotics in the gastrointestinal tract, paving the way for the development of advanced probiotic products.

Study on High Yield Strength Monolith NbTi Superconducting Wire for MRI Magnets in WST

Study on High Yield Strength Monolith NbTi Superconducting Wire for MRI Magnets in WST

A super-hydrophilic graphite directly from lignin enabled by a room-temperature cascade catalytic carbonization

A cost-effective, and low-energy room-temperature cascade catalytic carbonization strategy is demonstrated for converting lignin into graphite with a high yield of 87 %, a high surface potential of −37 eV and super-hydrophilicity. This super-hydrophilic feature endows the lignin-derived graphite to be dispersed in a variety of polar solvents, which is important for its future applications. Encapsulating of liquid metals with the graphite for electrical circuit patterning on flexible substrates is also advocated. These written patterns show superb conductivity of 4.9 × 106 S/m, offering good performance stability and reliability while being repeatedly stretched, folded, twisted, and bent. This will offer new designs for flexible electronic devices, sensors, and biomedical devices.

Synthesis of 1-Benzyl-2,4-diarylimidazole through I2/CuI-Catalyzed Cyclization of Benzylamine and Hydrazone.

In this paper, we report an innovative method for synthesizing 1-benzyl-2,4-diarylimidazole utilizing 1-phenylethanone-2-(2-pyridinyl) hydrazine and benzylamine, catalyzed by an I2/CuI system. This approach represents a significant departure from traditional methods for synthesizing polysubstituted imidazoles; it employs the I2/CuI catalyst to replace rare metal catalysts, thereby achieving high yields of substitution products (≤85%). This method for the generation of 1,2,4-triimidazole derivatives is characterized by its exceptional chemical selectivity and extensive substrate compatibility.

Proline-derived carboxylic acid as a bifunctional organocatalyst for highly efficient asymmetric Michael addition of aldehydes to nitroalkenes

A novel bifunctional proline amide–carboxylic acid catalyst was used for the highly stereoselective Michael reaction of various aldehydes with different nitroalkenes. This catalyst was easily prepared using commonly available anhydrides and proline linked with a diamine spacer. The asymmetric catalytic Michael reactions afforded high yields (up to 98 %), diastereoselectivities (syn/anti ratio: up to 86:14), and enantioselectivity (up to 99 % ee) when 5 mol% of the catalyst is used with N-methylmorpholine as a base in a dichloromethane solvent at room temperature.

Ionic liquid-assisted pretreatment of lignocellulosic biomass using purified Streptomyces MS2A cellulase for bioethanol production

In recent years, the process of producing bioethanol from lignocellulosic biomass through biorefining has become increasingly important. However, to obtain a high yield of ethanol, the complex structures in the feedstock must be broken down into simple sugars. A cost-effective and innovative method for achieving this is ionic liquid pre-treatment, which is widely used to efficiently hydrolyze the lignocellulosic material. The study aims to produce a significant profusion of bioethanol via catalytic hydrolysis of ionic liquid-treated lignocellulose biomass. The current study reports the purification of Streptomyces sp. MS2A cellulase via ultrafiltration and gel permeation chromatography. The kinetic parameters and the biochemical nature of the purified cellulase were analyzed for the effective breakdown of the EMIM[OAC] treated lignocellulose chain. The two-step cellulase purification resulted in 6.28 and 12.44 purification folds. The purified cellulase shows a Km value of 0.82 ± 0.21 mM, and a Vmax value of 85.59 ± 8.87 μmol min−1 mg−1 with the catalytic efficiency of 1.027 S−1. The thermodynamic parameters like ΔH, ΔS, and ΔG of the system were studied along with the thermal deactivation kinetics of cellulase. The optimal temperature and pH of the purified cellulase enzyme for hydrolysis was found to be 40 °C and 7. The rice husk and wheat husk used in this study were pretreated with the EMIM [OAC] ionic liquid and the change in the structure of lignocellulosic biomass was observed via HRSEM. The ionic liquid treated biomass showed the highest catalytic hydrolysis yield of 106.66 ± 0.19 mol/ml on the third day. The obtained glucose was fermented with Saccharomyces cerevisiae to yield 23.43 g of ethanol/l of glucose from the rice husk (RH) and 24.28 g of ethanol/l of glucose from the wheat husk (WH).

Efficient synthesis of dihydropyranochromene derivatives via nanocopper immobilized on Zn/Cr-LDH functionalized with poly(p-phenylenediamine)

A new catalyst, poly(p-phenylenediamine) functionalized with copper nanoparticles stabilized on layered double hydroxide (LDH@poly(p-phenylenediamine)@CuI), was prepared. The structure of the new catalyst was identified and confirmed using different analyzes such as FESEM, EDX, XRD, TGA and elemental mapping. The efficiency of the mentioned catalyst was confirmed in the three-component one-pot synthesis of various derivatives of dihydropyrano[3,2-c]chromene in aqueous ethanol solvent. The structure of the synthesized products was confirmed using infrared spectrometry (FT-IR), nuclear magnetic resonance (1H NMR and 13C NMR) and Mass techniques. High yield of products, short reaction time, easy purification, reuse of catalyst, and the use of a soft reaction method can be considered as the main advantages of this method. Additionally, this catalyst was recycled four times without a significant loss of catalytic power.

Dual-functionalized aramid fiber as an efficient heterogeneous acid-base bifunctional catalyst for the one-pot tandem reaction

Acid-base bifunctional catalysis represents a significant approach for achieving enzyme-like catalytic activity. In this study, we present a concise and direct approach for constructing acid-base bifunctional aramid fiber catalysts, enabling one-pot tandem deacetalization-Knoevenagel reactions in an aqueous environment. The fiber catalysts were conveniently prepared from commercially available aramid fiber using a straightforward two-step procedure, and comprehensively characterized using various detection techniques. Additionally, the acid-base cooperativity of the AF catalyst was effectively controlled through the manipulation of the acid-base ratios within the catalysts. Notably, the AF-SN1/2 catalyst exhibited superior catalytic activity in the one-pot tandem deprotection-Knoevenagel reaction at room temperature, resulting in the production of high yields. Moreover, the AF-SN1/2 catalyst demonstrated exceptional recyclability and performed admirably in a scaled-up experiment utilizing a straightforward fixed-bed reactor. These findings suggest that the AF-SN1/2 catalyst holds significant promise for future applications in cleaner industrial processes.

Mitigating Fruit Cracking and Premature Dropping in Bael (Aegle marmelos) cv. NB-9 under Subtropical Conditions: Evaluating the Effects of Bio-formulations and Boric Acid

The present investigation entitled “Mitigating Fruit Cracking and Premature Dropping in Bael (Aegle marmelos) cv. NB-9 under Subtropical Conditions: Evaluating the Effects of Bio-formulations and Boric Acid” was carried out during the year 2022-2023 at Main Experimental Station, Department of Fruit Science, College of Horticulture & Forestry, A.N.D.U.A.&T., Narendra Nagar (Kumarganj), Ayodhya, Uttar Pradesh, India (Lat 26.540849° Long 81.830421°). Application of various bio-formulations and boric acid with eco-friendly materials to study the various vegetative properties, cracking, fruit drop and effect on the vegetative growth of fruit. The experiment was laid down in randomized block design (RBD) with (12) treatments and (03) replications. The experiment consists of 12 treatments including control, T1 (Control), T2 (FYM 50 Kg), T3 (FYM 100 Kg), T4 (Boric acid 200g), T5 (Boric acid 400g), T6 (Biofertilizer 250g/plant [100g Azotobacter + 100g Biovita + 50g PSB]), T7 (FYM 50Kg + Boric acid 200g), T8 (FYM 50Kg + Boric acid 400g), T9 (FYM 50Kg +Biofertilizer 250g/plant [100g Azotobacter + 100g Biovita + 50g PSB]), T10 (FYM 100Kg + Boric acid 200g), T11 (FYM 100 Kg + Boric acid 400g) and T12 (FYM 100Kg +Biofertilizer 250g/plant [100g Azotobacter + 100g Biovita + 50g PSB]) was used for this study. The results revealed that treatment T7 outperformed the rest with minimum fruit cracking (1.53%), fruit drop (76.20%), the maximum number of flowers per plant (171.19), day-to-flowering (31.38) and yield (181.69 q/ha) was most effective in a vegetative quality and yield point of view. Thus, the treatment combination T7 is therefore recommended for application to Bael trees in subtropical conditions to obtain high yields with better quality fruits.

Probing single electrons across 300-mm spin qubit wafers

Building a fault-tolerant quantum computer will require vast numbers of physical qubits. For qubit technologies based on solid-state electronic devices1–3, integrating millions of qubits in a single processor will require device fabrication to reach a scale comparable to that of the modern complementary metal–oxide–semiconductor (CMOS) industry. Equally important, the scale of cryogenic device testing must keep pace to enable efficient device screening and to improve statistical metrics such as qubit yield and voltage variation. Spin qubits1,4,5 based on electrons in Si have shown impressive control fidelities6–9 but have historically been challenged by yield and process variation10–12. Here we present a testing process using a cryogenic 300-mm wafer prober13 to collect high-volume data on the performance of hundreds of industry-manufactured spin qubit devices at 1.6 K. This testing method provides fast feedback to enable optimization of the CMOS-compatible fabrication process, leading to high yield and low process variation. Using this system, we automate measurements of the operating point of spin qubits and investigate the transitions of single electrons across full wafers. We analyse the random variation in single-electron operating voltages and find that the optimized fabrication process leads to low levels of disorder at the 300-mm scale. Together, these results demonstrate the advances that can be achieved through the application of CMOS-industry techniques to the fabrication and measurement of spin qubit devices.

Ferrocene-based Amides, Amines and Alcohols as a Platform for the Design and Synthesis of Redox-active Hybrids: Synthesis, Electrochemical and Computational Studies

Herein we report on the synthesis and characterization of a number of the simplest ferrocenes, namely Fc-amides (4a-i), Fc-amines (5a-i) and Fc-alcohol (1), as starting materials for the synthesis of redox-active ferrocene-modified compounds. Suitable conditions allowed preparing a seria of various ferrocenes with aliphatic and aromatic substituents in good to high yields. The title products were characterized by 1H, 13C NMR, IR, ESI-MS analytical methods. The structure of ferrocenyl(ortho-chlorophenyl) methanol (1) was determined by single-crystal X-ray diffraction. Geometrical parameters in compound 1 were calculated using the ab initio MP2/6-31G* method and based on the advanced DFT calculations, DFT wb97xd/6-31G* and DFT wb97xd/6-311+G*. Electrochemical investigations by cyclic voltammetry revealed reversible redox processes for the ferrocenyl amides. Potentials were also calculated using two basis sets, 6-31G* and 6-311+G*, and demonstrated a high degree of correlation with experimental results.

Ecological niche modelling guided chemotypic analysis of Ageratum conyzoides L. from varied geography of India

Ageratum conyzoides L., recognized globally as a noxious weed, holds significant value in traditional medicine, particularly in treating cuts, wounds, and tick infestations. This study focuses on identifying specific germplasms of this plant, rich in therapeutically valuable metabolites, across various phytogeographical zones in India. Using the Reverse Phase High-Performance Liquid Chromatography with Photodiode Array Detection (RP-HPLC-PDA) method, we analyzed 110 samples to quantify five key bioactive markers: Precocene-I (PRC-I), Coumarin (CM), Caryophyllene (CAR), Caryophyllene Oxide (CAO), and Humulene (HUM). Our findings revealed distinct geographical variations in these compounds. The highest concentrations of PRC-I (7.86±1.36 %) was found in sample NAC-12, CM (1.50±0.46 %) and HUM (0.0099±0.0004 %) in NAC-104, while CAR (6.33±0.87 %) and CAO (6.23±0.18 %) were predominant in NAC-01 and NAC-02, respectively. Ecological Niche Modelling (ENM) was used to predict the climatic suitability of regions for high yield of these metabolites. The ENM results showed that annual precipitation (Bio 12), precipitation of the coldest quarter (Bio 19) and minimum temperature of coldest month (Bio 6) were the principal climatic factors influencing metabolite content. Geographically, the Indo-Gangetic plain, Indus plain, and Central India were identified as suitable for higher content of PRC-I, CAO, CAR, whereas the North Eastern region favoured high content of CM and HUM. This study underscores the importance of bioactive marker-based assessment in understanding chemotypic diversity and demonstrates the effective use of ENM in predicting optimal habitats for harvesting specific chemotypes. These insights pave the way for location-specific cultivation strategies and targeted procurement of metabolite-rich germplasms, contributing to sustainable sourcing and conservation efforts, as well as to the advancement of herbal product standardization and efficacy.

Synergistic enzyme assisted release of ferulic acid from brewer´s spent grain

Brewer’s spent grain (BSG), the most abundant by-product of the beer industry, can be considered a sustainable source of ferulic acid (4-hydroxy-3-methoxycinnamic acid) (FA). FA is esterified to the arabinoxylan in the BSG. FA exhibits a variety of biological activities and is a target for valorization of BSG. We present a novel enzyme-assisted approach that utilizes the synergistic action of specific endo-1,4-β-xylanase and ferulic acid esterase activity to selectively release high yields of FA from BSG. The study compares the efficacy of three different fungal feruloyl esterases (E.C. 3.1.1.73) of carbohydrate esterase family 1 (CE1), HiFae, AoFae1, and AnFae1, acting separately or in combination with two different endo-1,4-β-xylanases (EC 3.2.1.8), a bacterial GH30 enzyme from Dickeya chrysanthemi, and Shearzyme®, a commercial GH10 enzyme from Aspergillus aculeatus, respectively. On an equimolar dosage basis, the AnFae1-GH30 was the most efficient combination in releasing FA from BSG. This combination showed significant synergy in a dose-dependent manner, enabling up to 85% FA recovery from BSG within 30min. of treatment. The results demonstrate a novel enzymatic approach for valorization of BSG as FA is considered a high-value natural compound for use in e.g. anti-aging skin care products.

Development of an engineered Bacillus subtilis strain for antibiotic-free sucrose isomerase production.

Sucrose isomerase (SIase) catalyzes the hydrolysis and isomerization of sucrose into isomaltulose, a functional sugar extensively used in the food industry. However, the lack of safe and efficient heterologous expression systems for SIase has constrained its production and application. In this study, an engineered Bacillus subtilis strain for antibiotic-free SIase production was developed via a food-grade expression system. First, the B. subtilis strain TEA was modified through the CRISPR/Cas9 system, resulting in a mutant strain TEA4, which exhibited enhanced capabilities for recombinant protein expression. For efficient and safe production of SIase, different constitutive and inducible promoters were evaluated. The maltose-inducible promoter Poglv was found to have an extracellular SIase activity of 21.7 UmL-1 in engineered strain TEA4. Subsequent optimization of the culture medium further increased SIase activity to 26.4 UmL-1 during shake flask cultivation. Eventually, using the crude enzyme solution of the engineered strain in biotransformation reactions resulted in a high yield of isomaltulose under high concentrations sucrose, achieving a maximum yield of 83.1%. These findings demonstrated an engineered B. subtilis strain for antibiotic-free SIase production, paving the way for its scale-up industrial production and application.

High-temperature strength and kink-band formation in mille-feuille-structured Ti/FeTi eutectic alloys

To develop ultrahigh-strength and lightweight structural materials, the temperature dependence of the deformation behavior of Ti/FeTi eutectic alloys was examined using compression tests. An extremely high yield stress of ∼2.3 GPa was obtained at room temperature accompanied by ∼5% of plastic strain by the alignment of a “flower-like” lamellar microstructure. High stress was maintained up to 400 °C; however, the yield stress considerably decreased to ∼0.8 GPa at 600 °C. Shear deformation was observed at room temperature. However, at high temperatures, at 600 °C and above, the formation of a deformation-kink band was observed for the first time as the deformation mechanism, and this resulted in a rapid decrease in yield stress. The size of the kink bands was governed by the diameter of the aligned lamellar grains, which was termed the colony size. Large kink bands were formed in the alloy containing coarse colonies, resulting in the buckling of the specimen. The introduction of primary β-Ti grains in the eutectic microstructure improved the ductility at low temperatures, which was only accompanied by the marginal decrease in yield stress to ∼1.9 GPa. Furthermore, the high-temperature strength of the hypoeutectic alloy at 600 °C showed a higher value of ∼1.0 GPa compared to that in eutectic alloys. The refinement of the colony microstructure of the hypoeutectic alloy suppressed the formation of kink bands. The experimental results suggest that microstructural control is extremely important for improving the high-temperature strength of Ti/FeTi eutectic alloys by increasing the formation stress of the kink bands.