Modified form of High-Performance Concrete is a Reactive- Powder Concrete(RPC) which was first found by PierreRichard and Marcel Cheyrezy, they successfully built France laboratory using RPC. High compressive strength of over 200 MPa has been achieved, with flexural strength up to 40 MPa, and in certain cases crushing strengthup to 800 MPa with the introduction of hybrid fibre reinforcement. Cement OPC grade, silica fume, quartz sand, crushed quartz flour, water, a superplasticizer, and fibre reinforcement all contribute to making RPC.These materials have high durability characteristics as a result of their extremely low porosity, low permeability, limited shrinkage, and higher corrosion resistance. To increase package density, the powder combination of RPC should have a variety of granular particle classes. By dense packaging theory and grading optimization technique, the absence of coarse aggregate increased compactness. Because of its compactness, it reaches high strength. The rapid hydration of cement and silica fume at a high curing temperature of 100 °C as compete to 27 °C is something that causes the higher early strength. This paper discusses about the hybrid fibers incorporation in RPC under various curing conditions and its enhancement in strength than single fibers. Using micro and macro fibers dramatically improves the properties of RPC and thermal properties with various types of fiber. The mechanical characteristics of the RPC beam without the hybrid fiber, on the other end, are the lowest of all the mixtures. Apart from these characteristics, RPC can be utilized for industrial and nuclear waste storage facilities due to its ultra-dense microstructure, which provides ultra-high strength even at elevated temperature and water resistance. This paper infers that the addition of hybrid fiber in RPC considerably reduces the spalling of concrete at elevated temperatures and it exhibits superior strength and durability.