BackgroundMechanically assisted crevice corrosion at the head-neck interface puts implants at risk of trunnionosis, femoral head dissociation, implant failure and the development of metallosis. Metal-on-Metal bearings have very low wear rates, significantly lower than metal-on-polytethylene, but their wear results in cobalt and chromium ion systemic distribution. This is a study of the MITCH metal-on-metal bearing surface coupled with an Accolade TMZF stem. MethodsThis was a retrospective review of 24 total hip replacements 21 patients in that underwent MITCH TRH/Accolade TMZF implantation at a minimum of 12 years post operatively. The primary outcome of this study was all-cause revision with particular attention to revision due to trunnion failure and/or cobalt and chromium ion level. ResultsThere was a revision rate of 66.7 % (n = 16) at a minimum of twelve years post operatively. Most notably there were six revisions for a gross trunnion failure. Two cases were revised for impending trunnion failure. There were seven cases revised for elevated serum cobalt and chromium levels and one was revised for unexplained pain. DiscussionPatients in our study that underwent TMZF alloy cementless stems coupled with large cobalt chromium alloy heads are at high risk of catastrophic trunnion failure. The high rate of trunnnionosis in this implant combination is thought to be related to a significantly different Young's modulus due to a material mismatch coupled with galvanic corrosion.
Read full abstract