High-resolution Seismic Profiles Research Articles

The Quaternary sedimentary history and dynamics of the deep-water margin off the Hudson Strait ice stream

Sites of ice-stream discharge to the continental slope build trough-mouth fans from glacigenic debris flows (GDFs), subglacial meltwater flows, and suspended sediment. Thus, past ice configurations may be interpreted from the sedimentological record. This study links the records in cores, high-resolution seismic profiles, and multibeam swath bathymetry of Hatton Slope and Fan to the changing glaciological history in Hudson Strait, one of the largest ice streams of the late Pleistocene Laurentide Ice Sheet. 14C-AMS dates, X-ray fluorescence geochemical profiles, and oxygen isotopes in sixteen cores document sediment supply during the last glacial cycle, and earlier history is interpreted from seismic data. The Frobisher Bay slope sector has a long record of GDF deposits from severe glacial periods between MIS 6 and 22, with little impact of meltwater discharge. Mass-transport events and aggrading gravel-floored valleys dominate the northern Hatton slope sector. The central slope sector shows the greatest shelf break progradation by till deposition, with kilometre-spaced gullies heading at 700–730 mbsl from the last major grounding of the ice-stream on the upper slope during Heinrich event 3 (H3). The gullies pass downslope into ∼5 km wide valleys, which have been sites of sediment bypass since widespread meltwater flow in MIS 6 and show little aggradation since MIS 16. Intervening >50 m high ridges show alternating levee accretion and erosion by shallow mass-transport events. Downslope on Hatton Fan, GDFs are common and fill wide erosional channels that lead to the sandy braid plain of the central Labrador Sea. The channels of the southern sector and Saglek Slope have channeled turbidity currents down the NAMOC, and stratified contourite deposits accumulated on the fan. Over the MIS 1–3 period widely represented by cores, ice was grounded in Hatton Basin and on the upper slope to 700 m water depth only immediately prior to H3. Older and younger H events had a floating ice-shelf in Hatton Basin, and sedimentation was dominated by the retreat of that ice shelf to Resolution Island. Distal cores show no systematic difference between the H1–top H3 interval and the base H3–H5 interval. Given the supply of carbonate detritus of consistent composition back to at least H5, any MIS 3 deglaciation of Hudson Bay would require improbably high growth rates of ice sheets in the centre of the continent.

Echo-characterization of the Sloggett Canyon and the interfluve with Valentín Canyon, Tierra del Fuego Continental Margin, Argentina

Our recent echo-character analysis of the Tierra del Fuego Continental Margin, focusing on Sloggett Canyon and the interfluve with Valentín Canyon, provides insights into contemporary sedimentary processes. Utilizing high-resolution seismic profiles obtained from the R/V Austral in 2017, we categorized sub-bottom echoes into 10 distinct types, shedding light on various processes such as hemipelagic deposition, mass wasting events, glacial influence, and the impact of bottom water masses. By integrating data from the GLORYS12V1 model (1993–2020), CTDs from the World Ocean Database, and sediment samples, we analyze the interaction between bottom currents, seafloor topography, and sediment characteristics. We conclude that the flow of the Subantarctic Water Mass acts as an active transport of coarser sediment from the continental shelf into the canyon, maintaining the Sloggett Canyon's activity, while the flows of the Upper and Lower Circumpolar Water Masses contribute to contourite formation along the eastern canyon flank and the erosion of the lower interfluve, leading to the generation of distinctive longitudinal scours. Additionally, in the continental rise, the interaction of water masses with the seafloor influences the redistribution of the deep-sea fans from the Sloggett and Valentín canyons towards the northeast. This study significantly enhances our understanding of the sedimentary dynamics in this area, establishing the basis of the sedimentary distribution for future interdisciplinary studies and for setting a new baseline in marine protected areas.

Late Pleistocene-Holocene sea level and climate changes in the Gulf of Saros: Evidence from seismostratigraphic record and sediment core data

A detailed record of sea level changes and climate oscillations in the Gulf of Saros during the late Pleistocene to the Holocene is provided by high-resolution seismic reflection profiles and analysis of a sediment core. The seismic stratigraphy reveals the formation of four main depositional units bounded by prominent reflection surfaces, reflecting high sea level variations. The Last Glacial Maximum period in the gulf is associated with the lowstand sea level, forming the deepest marine terrace at −148 m. The increasing sea level due to post-glacial warming was accompanied by the deposition of transgressive units characterized by coastal onlaps together with local channel-fills. This transgressive phase was modulated by three brief still-stands sea levels at 17 cal ka BP, 14.6 cal ka BP and 13.6 cal ka BP, producing the younger marine terraces in the gulf at −135 m, −112 m and −90 m, respectively. A comparison of their depths with the global sea level curve reveals elevation differences with decreasing subsidence rates from the older to younger ages, implying tectonic subsidence along the gulf floor.The close correlation of multi-proxy data from core SAG-22 in the gulf with the northern Aegean and Anatolia data strongly indicates that the timings of the past climate events generally agree with the global and regional climate patterns. The warm climate around the gulf during the late phase of Bølling/Allerød (13.3–12.6 cal ka BP) is represented by high marine biological productivity and improved ventilation in the deeper water due to subsequent transgression. Permafrost formation in the catchment area during the following cold and dry Younger Dryas period (12.6–11.7 cal ka BP) resulted in reduced soil erosion and sediment input to the gulf. Noticeable warming during the Early Holocene between 11.2 cal ka BP and 9.4 cal ka BP is recorded by the multi-proxy data of the core when the enhanced marine biological productivity occurred above the poorly oxygenated deep water column. The climatic deterioration to a cooler and drier phase during the Early to Middle Holocene transition (9.4–7.8 cal ka BP) resulted in intense physical weathering and erosion, causing the highest sedimentation in the gulf. The later period of the Holocene is associated with the formation of two discrete sapropels at 7.8 cal ka BP and 5.4 cal ka BP that were accompanied by warm and wet climates around the gulf.

Shallow structure and late quaternary slip rate of the Osaka Bay fault, western Japan

The Osaka Bay is situated at a seismically active region north of the Median Tectonic Line and east of Awaji Island in western Japan, known as part of the Kinki Triangle and the Niigata–Kobe Tectonic Zone. Dense distribution of active faults and high geodetic strain rates characterize the region, posing a major seismic hazard potential to the coastal and metropolitan areas of the Kansai region. To investigate the shallow structure and recent deformation history of active faults in the Osaka Bay, we acquired 15 high-resolution seismic profiles using a Mini-GI airgun and a Boomer as active sources, together with multi-beam bathymetry data across the Osaka Bay Fault. Our seismic sections image a ~ 0.1 to 3.7 km-wide asymmetric anticline forelimb above the Osaka Bay Fault at shallow depths, coupled with a ~ 2.6 km-wide syncline to the west, and a broad, ~ 11 km-wide syncline in the footwall to the east. The synclinal axial surface at shallow depths measured in this study ranges 75°–89°. We observe the vertical displacement of the Osaka Bay Fault increasing northwards along strike. The sediment thickness on the hanging wall, however, is variable, modified by non-tectonic processes such as by tidal currents, affecting the geometry of growth strata. The most recent deformation by the Osaka Bay Fault reaches to near the seafloor by active folding, with large vertical offsets of 8–14 m over the last ~ 11 ka, and 5–11 m over the last ~ 5 ka. By combining with previously reported borehole age data, the average uplift rate on the Osaka Bay Fault is estimated to be ~ 1.0 to 1.7 m/ka during the Latest Pleistocene to Holocene. The inferred slip of the Osaka Bay Fault during the Holocene is likely to account for > 5% of the regional geodetic strain accumulation within the Kinki Triangle. Further studies to evaluate the Holocene slip rates of regional faults are necessary to assess the seismic hazards and the internal strain budgets within the Kinki Triangle and the Niigata–Kobe Tectonic Zone.Graphical abstract

Seismogenic fault of the 2021 Ms 6.0 Luxian induced earthquake in the Sichuan Basin, China constrained by high-resolution seismic reflection and dense seismic array

Accurate documentation of the location and geometry of seismogenic faults are critical for understanding strong seismicity and seismic hazard mitigation. A rising concern worldwide is induced seismicity caused by hydraulic fracturing, yet the geological characteristics and mechanisms of such seismogenic faults remain insufficiently understood. In particular, a first-order issue is whether the strong (M ≥ 5.0) induced earthquakes are caused directly by the slip of shallow faults near shale reservoirs or indirectly by deep basement faults. The September 16, 2021 Ms 6.0 (Mw 5.4) Luxian earthquake in the Sichuan Basin, China is one of the world's greatest induced earthquakes related to shale gas exploitation. Here we constrain the geometry of the seismogenic fault of this earthquake using three-dimensional seismic reflection data and a dense seismic array. Pre-existing faults in the sedimentary cover are clearly visible in seismic coherence slices. However, these shallow faults do not match the seismological parameters of the Luxian earthquake. High-resolution seismic reflection profiles combined with relocated earthquakes indicate that the seismogenic fault is located in the Precambrian basement. The results suggest that the mainshock is most likely caused by the poroelastic effects due to fluid injection. Hydraulic fracturing could have reactivated a large-scale basement fault and triggered the strong earthquakes under a relatively high geo-stress conditions in the study area. The basement fault slipped upward and ruptured the sedimentary cover, resulting in a significant difference between the focal and centroid depths of the mainshock. Our findings emphasize the importance of investigating regional tectonic and geological settings, local stress fields, and pre-existing faults for studying potential induced seismicity in shale gas fields.

Exploring the nature of the concentric half-rings in the Pantelleria Vecchia Bank (Sicilian Channel)

The Pantelleria Vecchia Bank, a fascinating shoal in the Sicilian Channel, exhibits enigmatic underwater morphological and geological features. These have led to speculation about the possibility that this site may once have hosted an ancient settlement, dating back to a time around 9000 years ago when this bank was still above sea level. In this paper, we focus on a previously little-explored area in the northeastern part of the shoal, where a sequence of regularly arranged concentric half-rings was found in water depths of 30–34 m, the origin and purpose of which is still unclear. Using multibeam echosounder bathymetry, high-resolution seismic profiles, underwater imagery and petrographic analysis, we are beginning a comprehensive investigation of these concentric semicircles. Analysis of the data and examination of their geometry and structure suggest an artificial rather than a natural origin, leading us to hypothesize various possible meanings and functions.

A Paleo-Changjiang Delta Complex on the East China Sea Shelf Formed Some 30 ka Ago (at the MIS 3 Stage)

The distribution patterns of the paleo-Changjiang River deltas formed during the MIS 3 period before the last glacial maximum (LGM) contain important information about the deltaic deposits in response to climate and sea-level changes. However, so far, they are still poorly understood. Here, we reconstruct the stratigraphic and chronological framework of the deltaic system based on the analysis of 1835 km of high-resolution seismic profiles obtained from the northern East China Sea, together with a comparison with the research results from four existing boreholes and three groups of published seismic profiles from the study area. Within the strata from MIS 5 to MIS 1 that are preserved on the northern shelf of the East China Sea, we discovered a large-scale paleodeltaic complex formed during the MIS 3 period. During MIS 3, sea level dropped slowly; the paleodelta formed was large in scale and was distributed between water depths of 40 and 150 m. It is now directly exposed at the seabed at a depth of more than 100 m. The paleodelta had extended from the northwest to the southeast, with maximum thickness of the deposits around 55 m. The extensions in the east–west and south–north directions both exceeded 300 km, with a total area around 1.35 × 105 km2. Since the late Pleistocene, the tectonic structure beneath the East China Sea has been relatively stable. As such, sea-level fluctuations, sediment supply, and original topography were the main controlling factors for the development of the delta.

The River Valleys of the Greek Colony of Selinunte: Results of an Offshore Investigation

The ancient Greek colony of Selinunte, with its acropolis on a promontory on the south-western coast of Sicily, is flanked by two valleys where two modest rivers flow today: the Modione to the west and the Cottone to the east. Archaeological reconstructions, historical documents from various sources, and recent remote sensing surveys indicate two important bays corresponding to the ancient mouths of these two rivers, now completely covered by a thick layer of sediments. It is believed that the ports of the colony were located in these bays, although the remains of these ports are still sparse and contradictory. Here we present a multibeam bathymetric map of part of the marine area immediately off Selinunte and a series of high-resolution seismic profiles acquired parallel to the coastline. They show the geometries and stratigraphic context of the two buried river valleys offshore, from which information about the palaeoenvironmental setting and evolution of the landscape can be derived and which may be used in adequately guiding future archaeological excavation programs.

Discovery of the large-scale thrust nappe and its geological significance in the southwestern Santanghu fold–thrust belt, NW China

Studying the structural evolution of the piedmont fold and thrust belt is one of the most important methods to interpret the mechanism of intracontinental collision orogeny. In this study, we have discovered a long-distance large-scale thrust nappe with a width of approximately 20 km in the southwestern margin of the Santanghu Basin, which provides a good evidence for studying the Mesozoic–Cenozoic tectonic evolution mechanism of Moqinwula Mountain. Using the electromagnetic and high-resolution seismic profiles, we have determined that the hanging wall of the nappe is composed of the pre-growth strata of the Carboniferous–Middle Jurassic period and the syntectonic strata of the Cretaceous–Quaternary period. The nappe is subjected to two branch faults of the Baiyishan thrust, forming a breakthrough fault-propagation fold and a fault-bend fold along the detachment layer of the Haerjiawu Formation, and a large monoclinic is formed by the basement structural wedge near the mountain root. The growth strata and unconformity structure record that the fold–thrust belt has experienced five episodes of thrusting from the Late Triassic to Quaternary period. Based on sequential restoration and forward modeling, we propose that the southwestern margin of the Santanghu Basin has been shortened by at least 55 km, especially in the Late Jurassic and Late Cretaceous. Our results provide an excellent example for studying the mechanism of the transition from Yanshanian transpression to Himalayan thrust compression in the Eastern Tianshan region.

Understanding the Ries impact structure subsurface from high-resolution seismic data

Abstract The Ries impact structure (southern Germany) formed ca. 15 Ma and is 22–26 km in diameter, making it one of the youngest and best-preserved mid-size terrestrial impact craters, yet the subsurface has not been studied with modern geophysics. We present the first high-resolution seismic profiles of the Ries impact structure; the profiles show discontinuous intra-basement reflectors and a central crater floor without a significant central topographic high. The inner crystalline ring sits adjacent to, not on top of, the crater terrace zone. These morphologies indicate that during the crater modification stage, the rebounding central uplift at Ries rose and then collapsed without the continued outward motion required to form a fully developed peak ring. The Ries impact structure may be best considered a transitional complex crater form between a central-peak crater and a peak-ring crater as documented on the Moon and other rocky planets. A series of high-amplitude, discontinuous, topographically influenced reflectors overlying the basement implies that the suevite within the crater basin was emplaced via lateral transport.

Sequence stratigraphy and evolution of the southern Central Vietnam Shelf during Late Pleistocene-Holocene

The central Vietnam continental shelf is located on the western margin of the East Vietnam Sea (South China Sea). This study provides new findings regarding the Late Pleistocene-Holocene evolution of the southern central Vietnam shelf off Binh Dinh province using high-resolution seismic profiles and sediment cores. The study found that the Late Pleistocene-Holocene sequence stratigraphic model of the study area can be divided into three systems tracts: the regressive systems tract (RST), the transgressive systems tract (TST), and the highstand systems tract (HST). The RST is the oldest and thickest of the three systems tracts and is characterized by forced regressive and lowstand deposits. These deposits likely formed between the Marine Isotope Stages (MIS) 5e highstand and the Last Glacial Maximum (LGM) termination. The RST is well-preserved at water depths deeper than 60 m and has a maximum thickness of about 40 m. The TST is the middle systems tract and was likely deposited during a postglacial transgressive period, from the LGM lowstand termination to around 8 cal ky BP. The TST is thickest in shallow water depths in the southern part of the study area and within incised-valley systems. The HST is the youngest of the three systems tracts and is dominated by thick mud clinoforms that prograde onto the shelf following mid-Holocene sea-level highstand until the present day. The HST was primarily deposited in shallow water depths of 0–50 m and decreases in thickness towards the outer shelf, ending at a water depth of around 80 m.The study also found that Late Pleistocene-Holocene relative sea-level change is the main factor controlling the overall stratigraphic organization of units on the study area. The presence of the beach-ridge structure at a water depth of approximately 140 m below the modern sea level in the southernmost part of the study area suggests that the region experienced a sea-level lowstand in the past. This lowstand was likely a result of subsidence due to a high sedimentation rate. This discovery is consistent with earlier studies conducted on the central Vietnam shelf. There are similarities in the deposition of Late Pleistocene-Holocene deposits between Binh Dinh and other shelves worldwide, indicating that there may be consistent controlling factors that govern the geological history of these regions. However, the thickness and distribution of deposits in the study area may be different due to local factors that interacted to shape the area differently than others.

Sea Floor Characterization by Multiples’ Amplitudes in Monochannel Surveys

The lithological characterization of the seafloor is key information for offshore engineering, especially when it comes to pier and platform design. Undetected shallow gas pockets may cause the collapse of heavy platforms for hydrocarbon production. Unconsolidated sediments are not ideal for the basement of wind farms for electric power production. Drilling and coring can be used for local sampling, but continuous profiles or even areal coverage are far more preferable. High-resolution seismic profiles are successfully used when ports are not too busy, but otherwise, single-channel systems must be used. We show in this paper that even these simpler systems can be used to estimate parameters such as the acoustic impedance of shallow sediments directly beneath the seafloor. We exploit the amplitude decay of the multiple reflections between the seafloor and the surface, which does not depend on the source energy. If the offset between source and receiver is not too small, we can estimate the shallow P velocity and, via acoustic impedance, also the rock density.

Faulting, sediment loading, and flow of underlying ductile units: A case study from the Western Ionian Basin Offshore Eastern Sicily

Tectono-stratigraphic analysis coupled with digital 3D surface modelling derived from high-resolution seismic profiles is performed along a narrow turbidite basin offshore E-Sicily in order to increase understanding on the processes that contributed to the shaping of the Western Ionian Basin. Seismic-reflector patterns of the identified Pliocene-Quaternary sequence point to syn-depositional deformation during the Pliocene associated with the simultaneous activity of regional faults and underlying ductile units. Long-wavelength sediment fanning results from the extensional activity of the Malta Escarpment faults. Conversely, internal reflector architecture and lateral terminations indicate localized subsidence associated with the growth of uprising structures in the easternmost part of the basin. Lateral shifting of basin depocenters is in line with withdrawal effects observed in basins floored by ductile units (salt or shale). 3D modelling of time-reference surfaces highlights sub-circular depressions associated with nearby structural culminations. This pattern is similar to salt-withdrawal minibasins commonly reported in evaporite-floored basins. Accordingly, salt migration/flow triggered by sediment loading, locally enhanced by fault activity, is proposed as the process controlling basin evolution during the Pliocene in the Western Ionian Domain. Nevertheless, the possibility of shale/mud tectonics as the ductile source of deformation cannot be discounted.

Fluid-Related Features in the Offshore Sector of the Sciacca Geothermal Field (SW Sicily): The Role of the Lithospheric Sciacca Fault System

The Sciacca basin extends in the southwestern part of Sicily and hosts an important geothermal field (the Sciacca Geothermal Field) characterized by hot springs containing mantle gasses. Newly acquired high-resolution seismic profiles (Boomer data) integrated with a multichannel seismic reflection profile in close proximity to the Sciacca Geothermal Field have documented the presence of numerous active and shallow fluid-related features (pipes, bright spots, buried and outcropping mud volcanoes, zones of acoustic blanking, and seafloor fluid seeps) in the nearshore sector between Capo San Marco and Sciacca (NW Sicilian Channel) and revealed its deep tectonic structure. The Sciacca Geothermal Field and the diffuse submarine fluid-related features probably form a single onshore–offshore field covering an area of at least 70 km2. This field has developed in a tectonically active zone dominated by a left-lateral transpressive regime associated with the lithospheric, NNE-striking Sciacca Fault System. This structure probably favored the rising of magma and fluids from the mantle in the offshore area, leading to the formation of a geothermal resource hosted in the Triassic carbonate succession that outcrops onshore at Monte San Calogero. This field has been active since the lower Pleistocene, when fluid emissions were likely greater than today and were associated with greater tectonic activity along the Sciacca Fault System.

The Role of Sediment Records in Environmental Forensic Studies: Two Examples from Italy of Research Approaches Developed to Address Responsibilities and Management Options

The coupling of scientific evidence from sediment cores with historical information represents an effective way to reconstruct and quantify recent anthropogenic impacts in transitional and marine-coastal areas. These are both key points pertaining to studies that aim at establishing the responsibility for envi ronmental pollution. Good practices for the selection of sampling sites and specific survey techniques are fundamental to understand pollution histories and dynamics, together with reliable dating methods and analytical procedures. In addition, a certain degree of flexibility and willingness to explore different research pathways is necessary, particularly when unexpected questions arise from scientific data or from requests posed by authorities in charge of preliminary investigations or court debates. In this paper, two different study cases are reviewed, and the approaches developed to tackle with specific issues are presented. Its main purpose is both to explain study paths undertaken to answer challenging scientific-legal questions and to provide examples for developing countries that present similar risks of uncontrolled industrialization. Results were used in preliminary investigations or court debates for the attribution of responsibility for environmental pollution to past or present industrial managements. In addition, they were fundamental for other studies aiming at implementing models that simulate the fate and distribution of contaminants and human exposure. In the Augusta Harbor, an integrated approach merged archive information, bathymetry, and high-resolution seismic profiles with the results of an independent tracer (hexachlorobenzene, HCB). This approach helped attribute the presence of high surficial Hg concentrations to resuspension and redistribution of deep sediments caused by dredging and maritime traffic and not to active outfalls. In the Venice Lagoon, an extensive literature search supported analytical results for the correct identification of industrial processes responsible for the contamination by polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) in the canals of the Porto Marghera Industrial Area. In addition, sedimentary profiles of PCDD/Fs in local salt marshes (“barene”) recorded well the events relative to the industrial development and management of the area reported by historical documents, confirming their potential for this kind of investigation.

Quaternary sedimentary processes on the Bahamas: From platform to abyss

Understanding the interaction between sediment production on and export from shallow-water areas of platforms and slopes is primordial when assessing sedimentary processes on a carbonate-platform scale. In this manuscript we explore variations in facies, sediment export, sediment deposition and reorganisation, hydroacoustic- and small-scale sedimentary structures, but also assess the variability in current systems as observed during the Quaternary for the north-facing margin of Little Bahama Bank (LBB) and compare those characteristics with features observed on other slopes surrounding LBB and Great Bahama Bank (GBB).Over the past decade, the northern margin of LBB was explored during a series of oceanographic cruises of the CARAMBAR project, which included the collection of 24.270 km2 of bathymetry data, 6.398 km of very high-resolution seismic profiles, and 42 cores covering water depths ranging from 177 m to 4873 m. This study evaluates the results obtained from the analysis of sediment cores retrieved in the Great Abaco Canyon area (GAC), located between the lower northern LBB slope, which is connected to the abyssal plain. The analysis of the shallower parts of the LBB slope relies on earlier studies and are complementary to our data, and allow for a detailed analysis of the sedimentary processes acting along the entire LBB slope.The data reveal that Quaternary sediment distribution differs when moving from the north-eastern to the north-western LBB slope. The entire LBB slope is dissected by numerous canyons. Gravity processes enriched in coarse platform components occur infrequently and are concentrated within lobes in the east. Only coarse-grained rich bank facies can concentrate coarse grains on this margin. The western LBB slope is mostly influenced by fine-grained platform export and current circulation. The deeper GAC area is dominated by pelagic sediments that are supplied from the canyon sides and through tributaries. The sediment composition confirms that pelagic sediment production and current movements determine the sediment-deposition and redistribution processes at this site.The comparison with other Bahamian slopes demonstrates that a leeward position agrees with high sedimentation rates on the slopes resulting in specific morphologic structures, such as gullies and sediment waves, related to fine-grained sediment export, whereas platform-derived coarse-grained facies are deposited downstream in larger structures, such as canyons, that are not affected by the main wind direction. Slope angle could also have an impact on grain-size export, as it appears that coarse-grained deposits are frequent on steep slopes like those bordering the Exuma Sound basin.

Quaternary Evolution of Ischia: A Review of Volcanology and Geology

Ischia shows intriguing and complex geology, which has been deeply investigated. In this paper, a reappraisal of the Quaternary geologic evolution of Ischia based on literature data is advised, concentrating on the volcanology of the island, based on field data and geochemistry, due to the happening of active fumarolic systems on the island and the marine geology and geophysics, which are intensively studied in the frame of the CARG Project. The literature studies have been incorporated with the geological interpretation of high-resolution seismic profiles, partly previously published and herein reorganized with the aim to highlight the geologic evolution of the different sectors of the island (northern Ischia, southern Ischia). The outcrop data have shown the deposits of ten explosive eruptions: among them, we focused on the S. Angelo Tephra. The laccolith model has been described in order to explain the resurgence of Ischia starting from 55 ky B.P. Geochemical information has been synthesized to reconstruct the volcano-tectonic development of Ischia during the last 55 ky B.P. Different models of block resurgence of Ischia have been discussed, based on literature studies. These aspects have supplemented the Quaternary geologic evolution of Ischia. While the northern Ischia offshore shows complex stratigraphic relationships between buried volcanic edifices, the southern Ischia offshore has been mainly commanded by erosional activities, progressive next to a dense system of submarine channels, and by the volcano-tectonic activities, which have triggered off the location of the Ischia Debris Avalanche.

Two enigmatic ridges in the Pantelleria Vecchia Bank (NW Sicilian Channel)

The Pantelleria Vecchia Bank is a submerged calcareous-arenitic shoal in the NW sector of the Sicilian Channel. Together with other morphological heights, some of which are volcanic in origin, this shoal punctuates the shallow Adventure Plateau, which was above sea level from the Last Glacial Maximum until at least 9000 years ago. The rise in sea level caused by the melting of the ice caps gradually flooded the plateau, isolating the heights and creating a broad archipelago until the area was finally submerged. High-resolution Multibeam bathymetric mapping shows that the Pantelleria Vecchia Bank has an 820 m long rectilinear ridge connecting the two main shoals of the bank, and an 82 m long ridge perpendicular to the 820 m ridge 100 m from its southern end. The top of the 820 m ridge lies in a water depth of 35 m, its base in about 42 m, and the seaward side has a fairly uniform slope of 16°–22°. The 82 m ridge has an average width of ∼7 m and rises ∼1 m above the surrounding seafloor. Underwater photographs document that the entire seaward side of the 820 m ridge consists of juxtaposed blocks, the largest measuring about 3 × 4 m, some of which are rectangular in shape, while the upper part consists of horizontally arranged blocks and the lower part of sub-vertical blocks embedded in the sediments. Petrographic analyses show that the blocks forming the seaward side of the 820 m ridge can be classified as late Pleistocene calcirudites, while the 82 m ridge consists of bioclastic calcarenites of Tortonian age. A series of high-resolution seismic profiles crossing both ridges and composite mosaics of the seafloor obtained from underwater videos provide a comprehensive panorama of these two peculiar and in many ways enigmatic structures. The structures described and the palaeogeographical context in which they are embedded do not exclude the possibility that they are artefacts indicating an ancient temporary or permanent human presence in the Pantelleria Vecchia Bank.

Active tectonics in the Calabrian Arc: Insights from the Late Miocene to Recent structural evolution of the Squillace Basin (offshore eastern Calabria)

The Calabrian Arc represents one of the most active sectors of the upper plate of the Tyrrhenian-Ionian subduction system. This research aims to reconstruct the evolution of the Squillace Basin (Ionian offshore of the Calabrian Arc) from the Late Miocene to Recent times and recognise active shallow and deep structures using a multiscale approach. The latter is based on interpreting high-penetration and high-resolution seismic reflection profiles, calibrated with well-log data coupled with bathymetric data and the distribution of instrumental earthquakes. Data highlight three steps in the evolution of the Squillace Basin. A Late Miocene extensional event led to the formation of WNW-ESE oriented horst and half-graben structures. During the Pliocene, deformation was localised in the central and northern sectors of the basin and expressed by a WNW-ESE oriented strike-slip fault and NW-SE normal to trastensional faults, respectively. A transpressional event started in the Early Pleistocene, causing the positive inversion of deep (> 3 km) extensional faults and the formation of NW-SE to WNW-ESE oriented transpressional/reverse faults and related anticlines. The kinematics of these faults agree with the NW-SE oriented left-lateral Albi-Cosenza, Lamezia-Catanzaro and Petilia-Sosti crustal fault zones developed in north Calabria. The results of this work suggest that the transpressional structures in the northwestern sector of the basin likely represent the offshore prolongation of the Albi-Cosenza fault zone. NW-SE to WNW-ESE trending, shallow (<2 km) high-angle normal faults offset the younger deposits. Their depth and direction indicate that these faults are secondary structures formed in the extrados of the anticlines associated with the transpressional faults. The distribution of earthquakes shows events with M > 3 and depth <15 km located in the hanging wall of transpressional faults. The integrated data suggest that these structures are active and probably responsible for the major earthquakes that affected the Ionian offshore.

Detailed Imaging of a Seismogenic Fault That Potentially Induced the Two 2019 Weiyuan Moderate Earthquakes in the Sichuan Basin, China

Abstract Induced earthquakes are becoming a significant issue. Several destructive induced earthquakes (Ms ≥5.0) have occurred in shale gas fields located at the southwestern Sichuan basin, China, in the recent years. Specifically, two moderate earthquakes with magnitudes of Ms 5.4 (occurred on 8 September 2019) and 5.2 (occurred on 18 December 2019) exceeded the largest earthquake ever recorded in the Weiyuan. It remains unclear which seismogenic faults were responsible for the two moderate events due to insufficient knowledge of the subsurface structure and contradictory hypocenter depths obtained from different seismological methods. In this study, mainshock locations, focal mechanisms, and precise relocations of microseismicity were used to map the 3D geometry of the seismogenic fault. The result shows that the two moderate earthquakes occurred on the same fault. High-resolution seismic reflection profiles indicate several preexisting faults at various depths and a potential seismogenic fault. No large-scale faults are identified in the sedimentary cover above the Cambrian at the shallow centroid depth of these earthquakes. However, the seismic reflectors show phase discontinuous feature, indicating the existence of preexisting faults in the basement. A preexisting fault in the basement is consistent with a seismogenic fault that may have induced the two moderate earthquakes. Our study suggests that poroelastic stress propagation is likely responsible for the basement fault reactivation. The rupture on a stressed basement fault was triggered and produced two moderate earthquakes in a short period during hydraulic fracturing. The previous strategy of avoiding direct injection of fluids into preexisting faults to reduce seismic risk in operation region is not enough to avoid the possibility of the coupled poroelastic stress triggering deep fault rupture. We need to reevaluate the potential seismic risk of shale gas development in Weiyuan, the southern Sichuan basin shale gas field considering the preexisting faults in sedimentary and in basement and the effect of the fully coupled poroelastic stress field.