High-quality Single Crystals Research Articles

PbS/CsPbBr3 Heterojunction for Broadband Neuromorphic Vision Sensing.

Neuromorphic light sensors with analogue-domain image processing capability hold promise for overcoming the energy efficiency limitations and latency of von Neumann architecture-based vision chips. Recently, metal halide perovskites, with strong light-matter interaction, long carrier diffusion length, and exceptional photoelectric conversion efficiencies, exhibit reconfigurable photoresponsivity due to their intrinsic ion migration effect, which is expected to advance the development of visual sensors. However, suffering from a large bandgap, it is challenging to achieve highly tunable responsivity simultaneously with a wide-spectrum response in perovskites, which will significantly enhance the image recognition accuracy through the machine learning algorithm. Herein, we demonstrate a broadband neuromorphic visual sensor from visible (Vis) to near-infrared (NIR) by coupling all-inorganic metal halide perovskites (CsPbBr3) with narrow-bandgap lead sulfide (PbS). The PbS/CsPbBr3 heterostructure is composed of high-quality single crystals of PbS and CsPbBr3. Interestingly, the ion migration of CsPbBr3 with the implementation of an electric field induces the energy band dynamic bending at the interface of the PbS/CsPbBr3 heterojunction, leading to reversible, multilevel, and linearly tunable photoresponsivity. Furthermore, the reconfigurable and broadband photoresponse in the PbS/CsPbBr3 heterojunction allows convolutional neuronal network processing for pattern recognition and edge enhancements from the Vis to the NIR waveband, suggesting the great potential of the PbS/CsPbBr3 heterostructure in artificial intelligent vision sensing.

Low Temperature Synthesis of 2D p-Type α-In2Te3 with Fast and Broadband Photodetection.

2D compounds (A = Al, Ga, In, and B = S, Se, and Te) with intrinsic structural defects offer significant opportunities for high-performance and functional devices. However, obtaining 2D atomic-thin nanoplates with non-layered structure on SiO2/Si substrate at low temperatures is rare, which hinders the study of their properties and applications at atomic-thin thickness limits. In this study, the synthesis of ultrathin, non-layered α-In2Te3nanoplates is demonstrated using a BiOCl-assisted chemical vapor deposition method at a temperature below 350°C on SiO2/Si substrate. Comprehensive characterization results confirm the high-quality single crystal is the low-temperature cubic phase α-In2Te3 , possessing a noncentrosymmetric defected ZnS structure with good second harmonic generation. Moreover, α-In2Te3 is revealed to be a p-type semiconductor with a direct and narrow bandgap value of 0.76eV. The field effect transistor exhibits a high mobility of 18 cm2 V-1s-1,and the photodetector demonstrates stable photoswitching behavior within a broadband photoresponse from 405 to 1064nm, with a satisfactory response time of τrise = 1ms. Notably, the α-In2Te3 nanoplates exhibit good stability against ambient environments. Together, these findings establish α-In2Te3 nanoplates as promising candidates for next-generation high-performance photonics and electronics.

Spin reorientation, spin switching, and magnetic compensation in Er1−xSmxFeO3 single crystals

We investigated spin reorientation, magnetic compensation and spin switching transitions in a series of high-quality single crystals of Er1−xSmxFeO3 (x = 0, 0.2, 0.4, 0.6, 0.8) prepared using the optical floating zone method. Structural and other preliminary characterizations confirmed the quality and phase purity of the crystals. Rietveld refinement of powder XRD data indicates that lattice parameters a and c increase linearly with increasing Sm concentration, whereas b remained constant. Field-cooled cooling (FCC) measurements revealed a temperature-induced spin reorientation transition (SRT) from Γ4 (Gx, Ay, Fz) to Γ2 (Fx, Cy, Gz) for all the samples. SRT temperature increased with Sm concentration and spread widely above and below room temperature. Moreover, magnetic compensation is common to all the compositions but decreases as Sm doping increases. We also observe type-I spin switching in samples with x = 0, 0.2, and 0.4 at an applied field of 60 Oe under FCC protocol, with a reduction in spin switching temperature as Sm content increased. For Sm-rich samples (x = 0.6, 0.8), spin switching was absent at 60 Oe.

Toward Elucidating the Mechanism of High-Tc Superconducting Cuprates, the Long-Awaited High-Quality Single Crystal of Hg-1223

Toward Elucidating the Mechanism of High-<i>T</i>_c Superconducting Cuprates, the Long-Awaited High-Quality Single Crystal of Hg-1223

Bismuth chalcogenide topological insulators crystals grown by the optical floating zone technique

In this paper, two procedures for the growth of both binary and ternary single crystals of bismuth chalcogenides by optical floating zone technique are described. Detailed characterization has been carried out on a series of samples, i.e. Bi2SexTe3-x, with x = 0 and 0.9, and Bi2-xSbxSe3, with x = 0 and 0.15, to isolate high quality single crystals, essential for an accurate study of the physical properties of the materials. Systematic compositional and structural analysis on the samples grown by the two different procedures have been compared to infer the optimal growth parameters to obtain the largest possible single crystals. The c-axis lattice parameter of Bi1.85Sb0.15Se3 is reported here for the first time.

A Metal-Free Helical Covalent Inorganic Polymer: Preparation, Crystal Structure and Optical Properties.

Helical morphologies are widely observed in nature, however, it is very challenging to prepare artificial helical polymers. Especially, precisely understanding the structure information of artificial metal-free helical covalent inorganic polymers via single-crystal X-ray diffraction (SCXRD) analysis is rarely explored. Here, we successfully prepare a novel metal-free helical covalent inorganic polymer ({[Te(C6 H5 )2 ] [PO3 (OH)]}n , named CityU-10) by introducing angular anions (HOPO3 2- ) into traditional tellurium-oxygen chains. The dynamic reversibility of the reaction is realized through the introduction of organic tellurium precursor and the slow hydrolysis of polyphosphoric acid. High-quality and large-size single crystals of CityU-10 have been successfully characterized via SCXRD, where the same-handed helical inorganic polymer chains form a pseudo-two-dimensional layer via multiple hydrogen-bonding interactions. The left-handed layers and right-handed layers alternatively stack together through weak hydrogen bonds to form a three-dimensional supramolecular structure. The single crystals of CityU-10 are found to display promising optical properties with a large birefringence. Our results would offer new guidelines for designing and preparing new crystalline covalent polymers through tellurium-based chemistry.

9-Ethyl-6,6-dimethyl-8-[4-(morpholin-4-yl)piperidin-1-yl]-11-oxo-6,11-dihydro-5H-benzo[b]carbazole-3-carbonitrile Hydrochloride

Alectinib hydrochloride is an anticancer medication used for the first-line treatment of non-small cell lung cancer. Although it was approved for medical use ten years ago, and three polymorphs of this substance were proposed based on X-ray diffraction patterns, their crystal structures remained unknown to date. The main problem was the preparation of high quality single crystals due to the very low solubility of the salt. Herein, we report on the molecular and crystal structure of form I of alectinib hydrochloride as obtained using powder X-ray diffraction data from a laboratory source. Short Cl…N distances between the anion and the nitrogen atoms of the morpholine and benzo[b]carbazole rings indicate the positions of the H(N) atoms. As a result, the cation and anion form infinite Cl…H(N)-bonded chains.

Effect of a traveling magnetic field on cadmium zinc telluride growth by the traveling heater method

The growth of high-quality cadmium zinc telluride (CZT) crystals using the traveling heater method (THM) is strongly influenced by the morphology of growth interface. Here, we investigate the effect of a traveling magnetic field (TMF) on the growth of CZT single crystals by the THM using the multi-physics numerical simulation method. When no magnetic field is applied, the concave morphology of the growth interface caused by the gravity-driven natural convection is confirmed using a multi-component mass transfer model based on the Maxwell-Stefan equations. In contrast, the application of an upward TMF accelerates the flow near the crucible wall and hence the lateral flow along the growth interface, finally leading to a relatively flat growth interface. Conversely, the increase of a downward TMF intensity significantly weakens natural convection in the central melt region; particularly, when the magnetic induction strength is increased to 300 mT at a frequency of 50 Hz, the desired convex-shaped growth interface can be achieved with the appearance of strong vortices at the dissolution interface. Therefore, we conclude that both the upward and downward TMF can improve the growth interface and thereby facilitates the growth of high-quality single crystals.

Low-cost growth of high-quality monoisotopic hexagonal boron nitride single crystals using a boric acid precursor

This work demonstrates the successful synthesis of high-quality monoisotopic hBN single crystals (hNatBN, h10BN and h11BN) with good uniformity using a low-cost isotope-enriched boric acid precursor.

Synergistic crystallization regulation and defect passivation for growth of high-quality perovskite single crystals towards ultrasensitive X-ray detection

This report demonstrates a method of synergistic defect passivation and crystallization regulation, which can significantly improve crystal quality and promote X-ray detector performance.

Interfacial diffused reaction at two-phase solution induced crystallization for high-quality perovskite single crystals

A novel and universal two-phase solution method is developed to grow high-quality halide perovskite single crystals in this work. It can be expected that this method will help to advance the application of perovskite optoelectronic devices.

Lattice engineering through Al-substitution leads to enhanced magneto-optical properties of Tb3(AlxGa1−x)5O12 single crystals

High-quality TAGG75 single crystals are obtained by the Czochralski method for the first time. They exhibit excellent magneto-optical performance beyond TGG.

Preparation and growth mechanism of centimeter-scale (AgxCu1−x)2ZnSnS4 single crystals via a molten salt method

Centimeter-scale high-quality ACZTS single crystals were synthesized by a molten salt method for the first time, and its growth mechanism could be attributed to a type of epitaxial growth process.

High-quality Indium-doped Gallium Oxide Single Crystal Growth by Floating Zone Method

High-quality Indium-doped Gallium Oxide Single Crystal Growth by Floating Zone Method

Bulk crystal growth and characterization of non-centrosymmetric single crystal CaTa4O11

For the first time, high-quality bulk single crystals of CaTa4O11 were grown by the floating-zone method, and thus the current phase-diagram was revised for the stoichiometry CaO·2Ta2O5, showing a congruent melting behavior.

Low-temperature aqueous solution growth of the acousto-optic TeO2 single crystals

We report for the first time the growth of high-quality single crystals of acousto-optic α-TeO2 using an aqueous solution method.

Theoretical models for large-sized crystal growth

An accurate cross scale model that can effectively transmit information is the key.

Cooking in Salt for Ultra-Clean Superconductor UTe2

A new crystal growth technique, the molten salt flux liquid transport method, was developed to produce high-quality single crystals of spin-triplet superconductor UTe2. This method is promising for exploring the exotic superconductivity of other materials.

Metamagnetic phase transition induced large magnetocaloric effect in a Dy0.5Ho0.5MnO3 single crystal.

Magnetic refrigeration based on the magnetocaloric effect is gaining interest in orthogonal or hexagonal rare-earth manganite. However, a more comprehensive understanding of the underlying mechanism is still required. We grew a high-quality single crystal of Dy0.5Ho0.5MnO3 using the optical floating zone method, since the parent crystals DyMnO3 and HoMnO3 have orthogonal and hexagonal structures, respectively. The magnetic and magnetocaloric properties and refrigeration mechanisms are thoroughly investigated. Doping modifies the magnetism according to the results obtained from the investigation of magnetic and dielectric properties and heat capacity. The spin reorientation transition shifts towards low temperature in comparison to HoMnO3. Near the Néel temperature of rare-earth sublattices (5 K), the highest changes in negative magnetic entropy under 0-70 kOe are 18 J kg-1 K-1 and 13 J kg-1 K-1 along the a- and c-axes, respectively. The low-temperature metamagnetic phase transition caused by the alterations in the magnetic symmetry of Ho3+ contributes to an increased magnetocaloric effect in comparison to the parent crystals, rendering it a promising choice for magnetic refrigeration applications. Dy0.5Ho0.5MnO3 exhibits a clear magnetocrystalline anisotropy with enhanced refrigeration capacity and negative magnetic entropy change along the a-axis. The adiabatic temperature change of Dy0.5Ho0.5MnO3 is 8.5 K, larger than that of HoMnO3, rendering it a promising choice for low-temperature magnetic refrigeration applications.

Li3Na7B4P6O26: a new ultraviolet transparent congruently melting non-linear optical crystal.

The exploration of nonlinear optical crystals with ultraviolet (UV) transparent ranges and easy-to-grow large-size crystals is one of the current research interests. Herein, by combining borate and phosphate groups, a novel congruently melting alkali-mixed metal borophosphate, Li3Na7B4P6O26 (LNBPO) with UV transparency was successfully designed and synthesized using a high-temperature flux method. LNBPO crystallizes in the non-centrosymmetric (NCS) and polar orthorhombic space group Pca21 (no. 29), showcasing interesting (B2P3O13)∞ chains along the c axis. Notably, LNBPO has a moderate second harmonic generation (SHG) response (∼0.38 × KDP) and displays a wide transmission ranging from 0.22 to 3.68 μm, as measured by a [001]-oriented crystal wafer. Furthermore, a high-quality single crystal of LNBPO with sizes up to 14 × 14 × 12 mm3 was grown using the top-seeded solution growth method. The refractive indices of LNBPO were determined by applying the minimum deviation angle method. These results show that LNBPO possesses a phase-matching wavelength as short as 483 nm, indicating its potential as a new UV NLO crystal.