High-performance Energy Storage Applications Research Articles

Exploring the potential of constructing a hybrid supercapacitor with FeCoNi-LDH porous material containing oxygen vacancies for high-performance energy storage applications

Exploring the potential of constructing a hybrid supercapacitor with FeCoNi-LDH porous material containing oxygen vacancies for high-performance energy storage applications

Microwave assisted synthesis of NiMn<sub>2</sub>O<sub>4</sub> as electrode material for supercapacitor applications

In this work, spinel NiMn2O4 was successfully synthesized through microwave assisted co-precipitation method and followed by calcination at 500°C. The crystal structure and the presence of functional groups in NiMn2O4 were characterized through X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). The surface morphology was examined by field emission scanning electron microscopy (FE SEM). From the BET analysis surface area and average pore diameter of the mesoporous NMO nanoparticles are calculated to be 10.513 m2g-1and 8.55nm. The electrochemical performance of material as electrode material for supercapacitor applications was analysed by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The specific capacitance of the NMO electrode increased from 290.56 F/g to 751.57F/g with increase concentration from IM KOH to 6M KOH at scan rate of 5mV/s. These results indicate spinel NiMn2O4 as a promising candidate for high performance energy storage applications.

Phosphorous - Containing Activated Carbon Derived From Natural Honeydew Peel Powers Aqueous Supercapacitors.

The introduction of phosphorous (P), and oxygen (O) heteroatoms in the natural honeydew chemical structure is one of the most effective, and practical approaches to synthesizing activated carbon for possible high-performance energy storage applications. The performance metrics of supercapacitors depend on surface functional groups and high-surface-area electrodes that can play a dominant role in areas that require high-power applications. Here, we report a phosphorous and oxygen co-doped honeydew peel-derived activated carbon (HDP-AC) electrode with low surface area for supercapacitor via H3PO4 activation. This activator form phosphorylation with cellulose fibers in the HDP. The formation of heteroatoms stabilizes the cellulose structure by preventing the formation of levoglucosan (C6H10O5), a cellulose combustion product, which would otherwise offer a pathway for a substantial degradation of cellulose into volatile products. Therefore, heteroatom doping has proved effective, in improving the electrochemical properties. The improved performance is attributed to the high phosphorous doping with a hierarchical porous structure, which enables the transportation of ions at higher current rates. The high specific capacitance of 486, and 478 F/g at 0.6, and 1.3 A/g in 1M H2SO4 electrolyte with a prominent retention of 98% is observed for 2M H3PO4 having an impregnation ratio of 1:4.

Enhancement of Capacitive Properties of Ce-Doped MnAl2O4 Electrode for High Performance Energy Storage Applications

Enhancement of Capacitive Properties of Ce-Doped MnAl2O4 Electrode for High Performance Energy Storage Applications

Mesoporous Mn-substituted MnxZn1-xCo2O4 ternary spinel microspheres with enhanced electrochemical performance for supercapacitor applications.

Extensive investigations have been carried out on spinel mixed transition metal oxide-based materials for high-performance electrochemical energy storage applications. In this study, mesoporous Mn-substituted MnxZn1-xCo2O4 (ZMC) ternary oxide microspheres (x = 0, 0.3, 0.5, 0.7, and 1) were fabricated as electrode materials for supercapacitors through a facile coprecipitation method. Electron microscopy analysis revealed the formation of microspheres comprising interconnected aggregates of nanoparticles. Furthermore, the substitution of Mn into ZnCo2O4 significantly improved the surface area of the synthesized samples. The electrochemical test results demonstrate that the ZMC3 oxide microspheres with an optimal Mn substitution exhibited enhanced performance, displaying the largest specific capacitance of 589.9Fg-1 at 1Ag-1. Additionally, the ZMC3 electrode maintained a capacitance retention of 92.1% after 1000 cycles and exhibited a significant rate capability at a current density of 10Ag-1. This improved performance can be ascribed to the synergistic effects of multiple metals resulting from Mn substitution, along with an increase in the surface area, which tailors the redox behavior of ZnCo2O4 (ZC) and facilitates charge transfer. These findings indicate that the incorporation of Mn into mixed transition metal oxides holds promise as an effective strategy for designing high-performance electrodes for energy storage applications.

Research and development of double layer P-doped laser induced graphene thin film electrode for flexible micro-supercapacitor applications

Laser-induced graphene (LIG) has garnered significant attention for its cost-effectiveness and high efficiency in fabricating flexible micro-energy storage devices. In this study, we devised a simple method to fabricate double layer P-doped LIG electrodes through repetitive laser induction technology for high-performance flexible energy storage applications. Instead of utilizing commercial polyimide (PI) thin film, we optimized the formation process of P-doped PI thin film and achieved a highly flexible double layer P-doped LIG thin film electrode with a uniformly porous structure and the high porosity through repeated laser induction processes. Experimental results demonstrated that the developed double layer P-doped LIG thin film electrode exhibits high porosity, high specific areal capacitance of 180 mF cm−2, and high energy density of 0.025 mWh cm−2. Furthermore, an all-solid-state micro-supercapacitor utilizing hydrogel electrolyte was assembled, demonstrating a high areal capacitance of 62 mF cm−2 and excellent cycling stability with 95% capacitance retention after 6000 charging/discharging cycles. Moreover, the developed all-solid-state micro-supercapacitor successfully powered a light-emitting diode, showcasing its significant potential for practical energy storage applications.

Ultrasonic-assisted hydrothermal synthesis of MNCNT-decorated SmCoO3 perovskite composite: a facile approach for high-performance energy storage applications

Ultrasonic-assisted hydrothermal synthesis of MNCNT-decorated SmCoO3 perovskite composite: a facile approach for high-performance energy storage applications

Multifunctional activated carbon derived from novel biomass for high-performance energy storage applications: A sustainable alternative to fossil-fuel-derived carbon

Biomass-derived activated carbon materials have been attracted as low-cost and sustainable electrode materials for energy storage applications. In this work, we synthesised activated carbon from black gram whole skin for the first time, and the used source is a cost-effective carbon precursor. Nitrogen and phosphorous doping in activated carbon improved electronic conductivity, surface area and porosity. In supercapacitor application, the nitrogen and phosphorous doped activated carbon sample showed a high specific capacitance of 425 F g−1 at 0.5 A g−1 and cycling stability of about 92.5 % capacitance retention even after 5000 cycles in a three-electrode system. The observed stable specific capacitance in a three-electrode system encouraged us to make a two-electrode symmetric device, showing a specific capacitance of 100 F g−1 at 0.5 A g−1 with a higher energy density of 20 Wh kg−1. In addition, the lithium storage capability of doped carbon showed good capacity of 750 mAh g−1 at 0.1 A g−1 with a reversible capacity of 687 mAh g−1 after 100 cycles. The hetero-atom doped activated carbon derived from black gram skin showed outstanding electrochemical performance towards supercapacitor and lithium battery application, indicating a potential alternative to fossil fuel-derived carbon.

Unveiling the potential of Na2FePO4F@PEG composite as cathode material for sodium-ion batteries

The economic and environmental advantages of Na2FePO4F fluorophosphate have positioned it as a highly promising cathode material for sodium-ion batteries (SIBs). This recognition stems from its demonstrated potential to address key challenges in energy storage systems, making it a subject of extensive research and studies.In this paper, the preparation of Na2FePO4F powder through a simplified, upscaling, and cost-effective approach that involves the direct use of phosphoric acid is described, aiming to evaluate its electrochemical performance. The obtained orthorhombic structure (S.G. Pbcn) is mixed with varying percentages of polyethylene glycol as a carbon source (15% and 20%) to generate large specific surfaces, improve electronic conductivity, and achieve an optimized carbon content for these materials. The 15% and 20% PEG-coated Na2FePO4F are evaluated at a 2 - 4 V voltage range at C/15 in Na-half cells using two electrolyte formulations: 5% FEC 1 M NaClO4:PC and 1 M NaPF6:PC. The NaPF6/FEC electrolyte exhibits better electrochemical characteristics and high cycling stability, especially in the case of the 15% PEG-coated material. These findings are also supported by the data from differential plots and rate capabilities, highlighting the potential of the coated material for applications in high-performance energy storage applications.

Facile synthesis and electrochemical investigation of graphitic carbon nitride/manganese dioxide incorporated polypyrrole nanocomposite for high-performance energy storage applications

Abstract Manganese dioxide (MnO2) nanoparticles were modified by graphitic carbon nitride (GCN) and polylpyrrole (Ppy) to enhance their electrochemical performance. The surface influence, crystalline structure, and electrochemical performance of the Ppy/GCN/MnO2 material were characterized and compared with those of pristine MnO2. It is found that surface modification can improve the structural stability of MnO2 without decreasing its available specific capacitance. The electrochemical properties of synthesized Ppy/GCN/MnO2 electrode were evaluated using cyclic voltammetry (CV) and AC impedance techniques in 5 M KOH electrolyte. Specific capacitances of 486, 815, 921, and 1377 F/g were obtained for MnO2, Ppy/MnO2, GCN/MnO2, and Ppy/GCN/MnO2, respectively, at 5 A/g. This improvement is attributed to the synergistic effect of GCN and Ppy in the Ppy/GCN/MnO2 electrode material. The Ppy/GCN/MnO2 electrode in KOH has average specific energy and specific power densities of 172 Wh kg−1 and 2065 W kg−1, respectively. Only 2 % of the capacitance’s initial value is lost after 10,000 cycles. The resulting Ppy/GCN/MnO2 nanocomposite had very stable and porous layered structures. This work demonstrates that Ppy/GCN/MnO2 nanomaterials exhibit good structural stability and electrochemical performance and are good materials for supercapacitor applications.

Rational Design of a Graphene Oxide–Coated Separator for Thermally and Mechanically Stable Li Metal Anode

Lithium-ion (Li-ion) batteries are widely used in high-performance energy storage applications because of their high energy density. However, safety concerns related to thermal runaway remain a significant challenge for Li-ion batteries. Electrolyte leakage and dendrite formation can trigger thermal runaway, and these factors typically damage traditional polyethylene (PE) separators. Consequently, these separators struggle under extreme conditions and fail to control dendrite growth. In this study, we proposed a solution by coating PE separators with graphene oxide (GO) layers. GO, as a ceramic material, provides superior thermal and mechanical stability compared with polymers. Moreover, GO-coated PE separators (GO-S) do not compromise the advantages of PE separators and effectively manage dendrite growth. In this study, the as-prepared GO-S exhibits excellent electrochemical properties in terms of high ionic conductivity, suppression of Li dendrite growth during charge/discharge process, and long-term cyclability for 7,000 h (3,500 cycles) as well as high thermal stability even after heat treatment of 100°C. Thus, we expect that this research can highlight the potential application of functionalized GO sheets in addressing the thermal and mechanical limitations of polymer-based separators, thereby enhancing the safety and reliability of Li-ion batteries.

Resolving the tradeoff between energy storage capacity and charge transfer kinetics of sulfur-doped carbon anodes for potassium ion batteries by pre-oxidation-anchored sulfurization

Sulfur-heteroatom doping is an effective approach to improve the capacity of carbon anodes for potassium-ion batteries due to the reversible K+-sulfur reaction. However, the random sulfur doping induces unresolved tradeoff between capacity and kinetics, which results from the fundamental difficulty in controllable sulfur incorporation using traditional approaches where breaking robust carbon-containing bonds is necessary. Herein, a pre-oxidation-anchored sulfurization approach is proposed to realize site-controlled and content-adjustable sulfur doping, demonstrating the optimum sulfur content of 9.8 at.% in sulfur-doped hollow carbon sphere (S-HCS). Intentional pre-oxidation introduces easy-to-break C-O/C-O-C bond-included oxygen-containing functional groups serving as anchoring sites for substitution with sulfur atoms. Consequently, S-HCS-9.8 % achieves superior performance for K+ storage (406.1 mA h g–1 at 0.1 A g–1, 112.6 mA h g–1 at 5 A g–1 and 170 mA h g–1 after 2,000 cycles at 2 A g–1). The enhanced electrochemical performances are attributed to the largest interlayer spacing and highest disorder degree resulting from the thiophene-sulfur-dominated configuration at high sulfur content, which realizes high structure reversibility and stable solid-electrolyte-interface layer. This work provides new insights and guiding principles for the development of heteroatom-doped carbon anodes for next-generation high-performance energy storage applications.

Ultrahigh energy storage performance in AN-based superparaelectric ceramics

Ceramics capacitors, especially featuring antiferroelectric (AFE) structure, are widely used in pulsed power electronic systems due to distinctive high-power density and external field stability. Lead-free AFE material AgNbO3 has seized substantial research attention owing to its unique temperature driven multi-level phase transitions, and many works have greatly improved the energy storage properties by engineering these temperature-dependent phase boundaries. In this work, an ever-unadopted strategy was proposed to modulate the relaxor structure in AgNbO3 by designing room-temperature (RT) superparaelectric phase via Bi incorporation into AN lattice matrix. Structural analysis shows M phase (space group Pbcm) evolves into O phase (space group Cmcm) with 12 mol.% Bi-substitution, breaking the long-range AFE order into polar nanoregions. Hence, an ultra-high recoverable energy density (7.6 J/cm3) and a high efficiency (79 %) are simultaneously achieved in the Ag0.64Bi0.12NbO3 ceramics under 52.2 kV/mm. Moreover, the excellent energy storage properties are accompanied with good temperature and frequency stability, with the variation of Wrec less than ± 15% (over 25–120 °C) and ± 10% (over 1–200 Hz) under 25 kV/mm, respectively. The novel approach reported herein provides a new guidance for designing AgNbO3-based and other AFE materials for high-performance energy storage applications.

Heteroatom doping carbon film derived from hyphae as a self-supporting cathode for advanced lithium sulfur batteries

Much attention has been paid to lithium sulfur battery due to its high energy density. However, low S loading and poor cycling stability have hindered their commercialization. In this work, a porous carbon film with rich heteroatom doping was prepared from the Penicillium chrysogenum hyphae film by freezing drying and high-temperature carbonization. Then the carbon film loaded polysulfide solution was utilized as a self-supporting cathode for Li-S batteries. The self-supporting cathode exhibited good rate performance (513.1 mAh/g at 1C) and improved cycling stability (more than 400 cycles) under a high current density (0.5C). This is mainly attributed to the abundant heteroatoms that provided active sites with superior adsorption ability for lithium polysulfide, which not only enhanced the cycling stability but also facilitated the conversion kinetics. Besides, the fibrous network morphology with affluent porous structures inherited from hyphae provided a large specific surface area and sufficient space for accommodating active substances. This work shows the great potential of hyphae derived porous carbon electrodes for high-performance energy storage applications.

Interconnected CoNi-Se Hollow Flakes through Reduced Graphene Oxide Sheets as a Cathode Material for Hybrid Supercapacitors.

Achieving a high energy density and long-cycle stability in energy storage devices demands competent electrochemical performance, often contingent on the innovative structural design of materials under investigation. This study explores the potential of transition metal selenide (TMSe), known for its remarkable activity, electronic conductivity, and stability in energy storage and conversion applications. The innovation lies in constructing hollow structures of binary metal selenide (CoNi-Se) at the surface of reduced graphene oxide (rGO) arranged in a three-dimensional (3D) morphology (CoNi-Se/rGO). The 3D interconnected rGO architecture works as a microcurrent collector, while porous CoNi-Se sheets originate the active redox centers. Electrochemical analysis of CoNi-Se/rGO based-electrode reveals a distinct faradic behavior, thereby resulting in a specific capacitance of 2957 F g-1 (1478.5 C g-1), surpassing the bare CoNi-Se with a value of 2149 F g-1 (1074.5 C g-1) at a current density of 1 A g-1. Both materials exhibit exceptional high-rate capabilities, retaining 83% of capacitance at 10 A g-1 compared to 1 A g-1. In a two-electrode coin cell system, the device achieves a high energy density of 73 Wh kg-1 at a power density of 1500 W kg-1, stating an impressive 90.4% capacitance retention even after enduring 20,000 cycles. This study underscores the CoNi-Se/rGO composite's promise as a superior electrode material for high-performance energy storage applications.

One-step synthesis and fabrication of ZrMo2O8 nanostructures as advanced electrode material for energy storage applications

Nanostructures of metal molybdates show great potential as high-performance electrode materials for the forthcoming development of energy storage devices. In present work, ZrMo2O8 nanostructure was constructed using a simple chemical procedure and followed by examination with the aid of several spectral and analytical tools. The supercapacitive properties of ZrMo2O8 electrode material were investigated using Cyclic voltammetry (CV), Galvanostatic charge–discharge (GCD) and Electrochemical Impedance Spectroscopy measurements (EIS). The as-prepared ZrMo2O8 nanostructures as supercapacitor (SC) electrode material exhibited pseudocapacitive performance with notable value of 288C g−1 at 1 A/g, significant cycling stability and 92.5% capacity retention with the coulombic efficiency of 87.4% even after 5000 GCD cycles at 1 A/g. The morphological investigations indicated that the higher Specific capacity (Cs) was primarily caused by the significant increase in active sites as well as active surface area. The Bode phase angle plot of ZrMo2O8 exhibited a low frequency intercept, with emphasis at approximately −52° phase angle, indicating a superior redox signature. The results infered that ZrMo2O8 nanostructures are promising candidates for high performance energy storage applications.

Effectively coupling of SnSe2nanosheet with N, Se co-doped carbon nanofibers as self-standing anode for lithium-ion batteries.

Tin selenides possess layered structure and high theoretical capacity, which is considered as desirable anode material for lithium-ion batteries. However, its further development is limited by the low intrinsic electrical conductivity and sluggish reaction kinetics. Herein, a well-designed structure of SnSe2nanosheet attached on N, Se co-doped carbon nanofibers (SnSe2@CNFs) is fabricated as self-standing anodes for lithium-ion batteries. The integration of structural engineering and heteroatom doping enables accelerated electrons transfer and rapid ion diffusion for boosting Li+storage performance. Impressively, the flexible SnSe2@CNFs anodes exhibit inspiring capacity of 837.7 mAh g-1after 800 cycles at 1.2 C with coulombic efficiency almost 100% and superior rate performance 419.5 mAh g-1at 2.4 C. The kinetics analysis demonstrates the pseudocapacitive characteristic of SnSe2@CNFs promotes the storage property. This work sheds light on the hierarchical electrode construction towards high-performance energy storage applications.

Effect of clay on TiO2 embedded PMMA nanocomposite for high-performance energy storage application

Present work deals with the dielectric and electrochemical properties of PMMA/TiO2 and PMMA/TiO2@Clay nanocomposite prepared via a simple sol-gel method followed by ultrasonication. With pore diameters of 16.657 Å, ternary nanocomposites have an increased specific surface area of 28.88 m2/g. The significant dielectric properties are observed for PMMA/TiO2 and PMMA/TiO2@Clay nanocomposite with the highest dielectric constant ε′ of 3.66 × 103 and 1.45 × 103 and maximum dielectric loss ε″ of 1.7 and 1.9 at 1 kHz respectively. The PMMA/TiO2 nanocomposite exhibits the highest σac conductivity of 1.29 × 10−4 S/m and 6.85 × 10−2 S/m, whereas; the PMMA/TiO2@Clay nanocomposite demonstrates the highest σac conductivity of 1.47 × 10−4 S/m and 1.84 × 10−2 S/m at 1 kHz and 3 MHz, respectively. The manufactured device's highest specific capacitance is 364.13 F/g, which corresponds to an energy density of 129.26 Wh/kg and a power density of 2913.04 W/kg. Even after 5000 CV cycles, a 97 % capacitance retention is reported in the cyclic stability. The present work proves its virtue and competency towards superior energy storage applications.

Hydrothermal synthesis of MoS2/MnO2 nanocomposite: a unique 3D-nanoflower/1D-nanorod structure for high-performance energy storage applications

In this study, MoS2/MnO2 nanocomposites electrode with a novel 3D nanoflower/1D nanorod architecture is effectively synthesized using a straightforward, cost-effective hydrothermal process. The addition of the 1D MnO2 nanorod offers...

Borax cross-linked guar gum hydrogel-based self healing polymer electrolytes filled with ceramic nanofibers towards high-performance green energy storage applications

An inventive concept towards the implementation of green energy-storing devices is the synthesis of hydrogel-based gel electrolytes from biopolymers imbued with self-healing capabilities. However, these electrolytes have drawbacks, such as low mechanical stability due to inadequate cross-linking and limited ionic conductivity compared to synthetic polymers. This work develops and characterizes a flexible self-healing hydrogel polymer electrolytes (HPEs) based on guar gum (GG) hydrogel for use in energy storage devices. Hydrogel is prepared with silicon dioxide (SiO2) nanofibers dispersed into borax-bonding cross-linked guar gum. Propylene carbonate (PC) and diethyl carbonate (DC) in equal amounts and lithium perchlorate (LiClO4) are used as plasticizers and salt, respectively. It has been found that adding nanofibers to the hydrogel and spreading them there considerably increases the ionic conductivity as evaluated by ac impedance spectroscopy. When the nanofiber concentration is 5 wt% (wt%), the hydrogel electrolytes reach their maximum room temperature ionic conductivity of 4.3 × 10−3 S cm−1. XRD, FTIR, SEM, and XPS investigations are used to explain the enhanced conductivity caused by the dispersion of nanofibers. Nanofibers also improve the self-healing abilities of materials, as demonstrated by the fact that hydrogels loaded with 5 wt% nanofibers recover from deformation more quickly than hydrogels with lower nanofiber contents. Additionally, the dispersion of nanofibers enhances the hydrogel's mechanical and thermal properties. According to electrochemical investigations and linear sweep voltammetry (LSV) graphs, hydrogel electrolytes are stable up to 4.7 V. When compared to nanofiber-free hydrogels, nanofiber-integrated hydrogel electrolytes show more excellent interfacial stability. The developed self-healing hydrogel-based polymer electrolytes exhibit outstanding promise for a range of energy storage systems, opening the way for creating high-performance and environmentally friendly energy storage solutions.