High-intensity Beam Research Articles

Harnessing quantum light for microscopic biomechanical imaging of cells and tissues

The biomechanical properties of cells and tissues play an important role in our fundamental understanding of the structures and functions of biological systems at both the cellular and subcellular levels. Recently, Brillouin microscopy, which offers a label-free spectroscopic means of assessing viscoelastic properties in vivo, has emerged as a powerful way to interrogate those properties on a microscopic level in living tissues. However, susceptibility to photodamage and photobleaching, particularly when high-intensity laser beams are used to induce Brillouin scattering, poses a significant challenge. This article introduces a transformative approach designed to mitigate photodamage in biological and biomedical studies, enabling nondestructive, label-free assessments of mechanical properties in live biological samples. By leveraging quantum-light-enhanced stimulated Brillouin scattering (SBS) imaging contrast, the signal-to-noise ratio is significantly elevated, thereby increasing sample viability and extending interrogation times without compromising the integrity of living samples. The tangible impact of this methodology is evidenced by a notable three-fold increase in sample viability observed after subjecting the samples to three hours of continuous squeezed-light illumination, surpassing the traditional coherent light-based approaches. The quantum-enhanced SBS imaging holds promise across diverse fields, such as cancer biology and neuroscience where preserving sample vitality is of paramount significance. By mitigating concerns regarding photodamage and photobleaching associated with high-intensity lasers, this technological breakthrough expands our horizons for exploring the mechanical properties of live biological systems, paving the way for an era of research and clinical applications.

Proposal for a Ramsey Neutron-Beam Experiment to Search for Ultralight Axion Dark Matter at the European Spallation Source

High-intensity neutron beams, such as those available at the European Spallation Source (ESS), provide new opportunities for fundamental discoveries. Here, we discuss a novel Ramsey neutron-beam experiment to search for ultralight axion dark matter through its coupling to neutron spins, which would cause the neutron spins to rotate about the velocity of the neutrons relative to the dark matter halo. We estimate that experiments at the HIBEAM beamline with a 50 m free flight path at the ESS can improve the sensitivity to the axion-neutron coupling compared to the current best laboratory limits by up to 2–3 orders of magnitude over the axion mass range 10−22 eV–10−16 eV. Published by the American Physical Society 2024

Design and development of vacuum system for electron beam powder bed fusion process

A vacuum system is one of the crucial components of the Electron Beam-Powder Bed Fusion Process (EB-PBF). It ensures the generation of a high-intensity electron beam. This paper presents a vacuum system design for the EB-PBF process. The work chamber and EB gun chamber have been designed and verified using ANSYS workbench for stress, strain, and deformation limits and found satisfactory. The analytical calculations have been performed for all the pumps, considering the various gas loads during the process. After the design, the vacuum system has been fabricated and tested for its stability, ultimate vacuum, and leak rate. The helium leak test results show that all the joints have a leak rate better than 1 × 10−8 mbar l/s. Further, the analytical results of each pump have been compared with experimental results and found almost in line with the theoretical results. The results show that a pressure lower than 1 × 10−5 mbar and 5 × 10−6 mbar can be achieved in the work chamber and EB gun chamber in less than 23 min and 10 min respectively. The chamber was evacuated multiple times and found that the chamber could still hold pressure better than 1 × 10−2 mbar after 48 h.

Exploring the potential of resonance islands and bent crystals for a slow extraction from circular hadron accelerators

New developments in accelerator physics have broadened the set of available techniques for manipulating charged-particle beams. Adiabatic trapping and transport of a beam in resonance islands has been studied and successfully implemented at the CERN Proton Synchrotron to perform multiturn extraction. Bent crystals have been successfully installed in the CERN Large Hadron Collider, improving the cleaning performance of the collimation system, and at the CERN Super Proton Synchrotron for reducing losses at the extraction septum in the case of slow extraction. In this Letter, we discuss the potential of the combined use of resonance islands and bent crystals to devise a technique to perform slow extraction in circular hadron accelerators. The proposed approach is promising, particularly for applications with high-intensity beams, as it could dramatically reduce the losses on the extraction devices. Published by the American Physical Society 2024

Variable-energy cocktail beam technology for investigating synergistic damage in nuclear materials on LEAF platform

This study addresses the critical issue of synergistic radiation damage in structural materials of fusion reactors, focusing on the interaction between the displacement defects and transmutation-produced hydrogen and helium. These effects are simulated and investigated by employing the advanced multi-beam ion implantation capabilities of the LEAF (Low Energy high intensity highly charged ion Accelerator Facility) platform. Firstly, high-intensity cocktail beams, such as “4He+ and 56Fe14+" and “4He+ and 58Ni15+", are generated and characterized successfully. Then, a complex radiation environment is mimicked within the fusion reactors by applying variable-energy irradiation. Secondly, similar penetration depths for different ions, which are crucial for studying synergistic effects, are obtained by precisely controlling the energy of the cocktail beams through the innovative energy modulation system of the LEAF platform. Finally, the post-irradiation analyses, performed by using the transmission electron microscopy (TEM) and nanoindentation, revealed distinct microstructural changes and alterations in material properties, providing insights into the degradation mechanisms under irradiation. This work not only generates diverse and high-intensity “cocktail” ion beams but also achieves rapid energy switching of the beams. Further, the work is expected to pave the way for the implementation of a novel multi-beam irradiation technique in advanced heavy-ion linear accelerators, and also to provide innovative experimental methods and technical support for studying the synergistic effects of nuclear materials.

Synergy of high-intensity chromium ion implantation and ion beam energy impact on the zirconium alloy surface

The peculiarities and modes of material modification with high-intensity, high-power density ion beams on the irradiated surface are studied for the first time. Chromium ions are implanted into a zirconium alloy using a 25 kW/cm2, 450 μs beam at the pulse repetition rates within 8–35 pps. Every high-energy ion pulse impact is followed by ultrafast cooling of the surface due to heat removal into the target material. Three modes are studied at the temperatures of 580, 700, and 900 °C with an additional pulsed heating. An increase in the average target temperature from 580 to 700 °C within 1 h at the same pulse power density allows increasing the depth of chromium ion alloying from 1.5 to more than 7 μm. The use of ultrafast cooling of the Zr1%Nb alloy surface offers a grain size reduction from a few μm to approximately 50–250 nm, without any microstructural changes throughout the sample volume. An inhomogeneous chromium ion distribution over the target surface and depth is observed.

Sputtering of targets in high-intensity heavy-ion beam experiments

Based on available models and experimental data, the sputtering of target atoms in long-term experiments with intense heavy ion (HI) beams has been considered. The experiments on the synthesis of superheavy nuclei (SHN), which are carried out in laboratories around the world, are examples of such experiments encountering the target atoms sputtering in specific conditions. Rotating wheels with a relatively large target annulus area are used in these experiments to reduce the temperature and radiation loads on the target. Large areas of rotating targets allow one to reduce the sputtering yields of target atoms significantly. The question arises about the reliability of these yields in experiments on the synthesis of SHN with Z>118. These nuclei can be produced with extremely low cross sections, requiring HI beam doses exceeding 10 20 particles passed through the target to observe several decay events of the thus synthesized SHN. Estimates based on approximations and simulations considered in this work are presented and compared with some data on actinide target sputtering obtained in experiments performed on the synthesis of SHN.

Study of curtaining effect reduction methods in Inconel 718 using a plasma focused ion beam.

The curtaining effect is a common challenge in focused ion beam (FIB) surface preparation. This study investigates methods to reduce this effect during plasma FIB milling of Inconel 718 (nickel-based superalloy). Platinum deposition, silicon mask and XeF2 gas injection were explored as potential solutions. These methods were evaluated for two ion beam current conditions; a high ion beam intensity condition (30kV-1µA) and a medium one (30kV-100nA) and their impact on curtaining reduction and resulting cross-section quality was assessed quantitatively thanks to topographic measurements done by atomic force microscopy (AFM). XeF2 assistance notably improved cross-section quality at medium current level. Pt deposition and Si mask individually mitigated the curtaining effect, with greater efficacy at 100nA. Both methods also contributed to reducing cross-section curvature, with the Si mask outperforming Pt deposition. However, combining Pt deposition and Si mask with XeF2 injection led to deterioration of these protective layers and the reappearance of the curtaining effect after a quite short exposure time.

Gap bridging in laser welding of EN AW 5083 with different joint configurations via beam oscillation and filler wire

The extended use of laser welding in the industry requires a less sensitive process in terms of geometrical tolerances of the joint edges. As the industrial availability of laser systems increases, the demand to use laser welding technology possibly with parts coming from less precise production steps is increasing. Gap formation is often caused by the edge quality of the parts coming from previous manufacturing steps such as sheet forming. Al alloy sheets deformed to box-shaped 3D forms often require welded joints on the edges in lap, but, and corner joint configurations. These joints are hard to carry out by laser welding due to the large gap formation caused by the tolerances of the deformation processes involved. Laser welding of Al alloys is already challenging in the absence of gap formation, while these joint configurations have been not feasible with a stationary beam due to incomplete fusion and defect formation. Laser welding with beam oscillation and wire feeding can improve the weldability of these joints. The oscillating motion of the high-intensity beam can achieve a deep weld together with a wider seam. Combined with wire feeding, the process can close gaps in the butt, lap, and corner joint configurations. On the other hand, the added oscillation and wire-related parameters require extending the experimental space, which requires a methodological study to identify feasible conditions. Accordingly, this work proposes a methodological approach to identify and set laser welding process parameters with beam oscillation and wire feeding for an EN AW 5083. Process parameters were initially studied using a simple analytical model that depicts the beam trajectory. Bead-on-plate tests were conducted to assess beam size, power, and weld speed ranges. Lap, butt, and corner joint conditions with a 0.5-mm gap were welded with high quality by manipulating the laser power, oscillation amplitude, and wire feed rate. The results show that welding speeds could be maintained as high as 55 mm/s with complete filling of gaps of up to 0.5 mm, eliminating the surface undercuts and achieving weld widths in the order of 2.5 mm. Moreover the results show the possibility control the depth of the welds from 3 mm to full-penetration conditions.

Beamline Optimisation for High-Intensity Muon Beams at PSI Using the Heterogeneous Island Model

Beamline Optimisation for High-Intensity Muon Beams at PSI Using the Heterogeneous Island Model

Preliminary results of the 2023 International Fermilab Booster Studies

An overview is given of the methods and preliminary results from dedicated beam studies on three topics conducted over five days in July 2023. In the first study, the Fermilab Booster magnets were held constant at magnetic fields corresponding to the injection energy. The beam loss and emittance growth were observed under varying intensity, tunes, and sextupole resonances. The corresponding beam conditions were also simulated with the MADX-SC code [1]. In the second study, measurements of the vertical half-integer resonance and correction methods are conducted for high-intensity beams ramping in the Booster. Finally, syncho-betatron instabilities are observed during transition-crossing in the Booster under strong space-charge conditions.

Electric field driven focusing and transport of plasma ion beams by micro-glass capillaries beyond the self-focusing limit

Micro-glass capillaries emerge as an important tool for the lossless guiding and focusing of ion beams (Kojima 2018 J. Phys. B: At. Mol. Opt. Phys. 51 042001). The self-focusing mechanism of the capillaries is primarily governed by charged patches induced on their inner walls by the incident beam (Stolterfoht et al 2002 Phys. Rev. Lett. 88 133201). However, the dominance of space charge forces over self-focusing forces in intense (J ≈ 1 A m−2) ion beams establishes a self-focusing limit (Maurya et al 2019 J. Phys. D: Appl. Phys. 52 055205), posing challenges to beam focusing beyond this limit. In this work, a novel method is introduced, demonstrating electrical control over the charge patch dynamics through an externally applied bias voltage, thereby enabling the focusing of Ar ion beams beyond the self-focusing limit. Experimental results reveal that adjusting the biasing voltage allows overcoming the self-focusing limit, resulting in the generation of a high-intensity ( Jout≈3.05×105 A m−2) nano-beam (∼160 nm). Furthermore, electrical control is shown to enhance the performance of both straight and tapered capillaries (SC/TC), with the TC being more effective for nano-beam generation. A Particle-In-Cell (PIC) simulation code has been developed to explain the experimental results. The implications of high-intensity nano ion beams in advancing nanopatterning, nanoscale material analysis, and matter wave interferometry, underscore significant contributions to research and innovation within electronics, materials science, nanotechnology, and emerging quantum technologies.

Laser beam effect on the entanglement of elastic collisions in quantum plasma

In the quantized field formalism, using Kramers–Henneberger unitary transformation as the semi-classical counterpart of Block–Nordsieck transformation, the dynamics of entanglement during the low energy scattering processes in bi-partite systems at the presence of a laser beam fields are studied. The stationary-state Schrodinger equation for the quantum scattering process is obtained for such systems. Then, using partial wave analysis, we introduce a new form of entanglement fidelity considering the effect of high-intensity laser beam fields. The effective potential of hot quantum plasma including plasmon and quantum screening effects is used to obtain the entanglement fidelity ratio as a function of the laser amplitude, and plasmon and Debye length parameters for the elastic electron-ion collisions. It is shown that the plasma free electrons oscillations under interaction with laser beam fields improve the correlations between charged particles and consequently lead to the increase in the system entanglement.

Monte Carlo intercomparison and benchmark of the neutron streaming in the ramified access maze of the CERN High-energy AcceleRator Mixed field (CHARM) facility at CERN

Experiments of high-energy neutron streaming were performed in the access maze of the CERN High-energy AcceleRator Mixed-field (CHARM) facility where high-intensity proton beams of 24 GeV/c impact on a copper target. The streaming of the secondary neutrons through the various legs of the ramified access maze of the facility was measured using aluminium activation detectors installed at 12 different locations: for the first time, the extended coverage of measurement locations allowed to assess the streaming in more distant areas of the maze. The attenuation profile along the maze measured via the production of 24Na was also used to benchmark results from Monte Carlo calculations performed with FLUKA, PHITS, and GEANT4: over almost the five orders of magnitude of the measured production yield, an agreement within a factor 1.4, 1.7, and 2.5 respectively was found for the three codes.

Nuclear structure opportunities with GeV radioactive beams at FAIR.

The Facility for Antiproton and Ion Research (FAIR) is in its final construction stage next to the campus of the Gesellschaft für Schwerionenforschung Helmholtzzentrum for heavy-ion research in Darmstadt, Germany. Once it starts its operation, it will be the main nuclear physics research facility in many basic sciences and their applications in Europe for the coming decades. Owing to the ability of the new fragment separator, Super-FRagment Separator, to produce high-intensity radioactive ion beams in the energy range up to about 2 GeV/nucleon, these can be used in various nuclear reactions. This opens a unique opportunity for various nuclear structure studies across a range of fields and scales: from low-energy physics via the investigation of multi-neutron systems and halos to high-density nuclear matter and the equation of state, following heavy-ion collisions, fission and study of short-range correlations in nuclei and hypernuclei. The newly developed reactions with relativistic radioactive beams (R3B) set up at FAIR would be the most suitable and versatile for such studies. An overview of highlighted physics cases foreseen at R3B is given, along with possible future opportunities, at FAIR. This article is part of the theme issue 'The liminal position of Nuclear Physics: from hadrons to neutron stars'.

Update of the 5 MW Beam-on-Target Requirements for improvement of the materials irradiation performance at IFMIF-DONES

IFMIF-DONES is a facility under construction in Granada, whose main goal is the validation and characterization of materials under a fusion prototypic irradiation field. This field is created by the interaction of a high energy intense continuous deuteron beam and a flowing liquid lithium target. The requirements imposed on the beam at the interaction point are a complex trade-off among the scientific experimental needs for the materials irradiation defined at the top-level requirements (20 dpa in a volume of 0.3 dm3 and 50 dpa in 0.1 dm3), and the technical constraints of several systems such as the Accelerator Systems, the Lithium Systems, and the Test Systems. Recent simulations with the initial definition of beam-on-target requirements showed the necessity of redefining them in order to fulfill the irradiation needs. This contribution will address the main challenges to gather the inputs for the definition and reassessment of the beam-on-target requirements. A comparison detailing the main changes compared to the previous ones will be given, together with a short overview of the studies ongoing by different systems to analyze the impact of each beam-on-target requirements on the performance of the whole facility.

Aging effects in the COMPASS hybrid GEM-Micromegas pixelized detectors

Large-size hybrid and pixelized GEM-Micromegas gaseous detectors (40 × 40 cm2 active area) were developed and installed in 2014 and 2015 for the COMPASS2 physics program which started at the same time. That program involved in particular two full years of Drell-Yan studies using a high-intensity pion beam on a thick polarized target. Although the detectors were placed behind a thick absorber, they were exposed to an important flux of low energy neutrons and photons. The detectors were designed to drastically reduce the discharge rate, a major issue for non-resistive Micromegas in high hadron flux, by a factor of more than 100 compared to the former ones. A hybrid solution was chosen where a pre-amplifying GEM foil is placed 2 mm above the micromesh electrode. A pixelized readout was also added in the center of the detector, where the beam is going through, in order to track particles scattered at very low angles. The combination of the hybrid structure and the pixelized central readout allowed the detector to be operated in an environment with particle flux above 10 MHz/cm2 with very good detection efficiencies and spatial resolution. The performance has remained stable since 2015 in terms of gain and resolution, showing the interest of hybrid structures associating a GEM foil to a Micromegas board to protect gaseous detectors against discharges and aging effects.

Design and beam dynamics validation of a spiral FFAG accelerator for CSNS-II

The fixed-field alternating gradient (FFAG) accelerator, with its compact structure and the combined advantages of high energy from synchrotrons and high beam intensity from cyclotrons, offers unparalleled benefits in accelerating protons, heavy ions, and short-lived particles such as muons and unstable nuclei. The China Spallation Neutron Source plans to establish an FFAG accelerator with a diameter of 20 meters at the end of the negative hydrogen linac for various purposes, including experiments in nuclear physics and medical applications. For this design, a scaling scheme using spiral magnets as the basic focusing structure is investigated to provide the proton beam with kinetic energy ranging from 300 MeV to 600 MeV. We present the design results for the scaling FFAG accelerator and discuss the optimization of the cell tune. A detailed beam dynamics verification and discussion of the proposed FFAG accelerator lattice are presented using the ray-tracing code Zgoubi, including off-axis optical characteristics, large amplitude transverse motion, and full-cycle longitudinal acceleration. The FFAG accelerator is demonstrated to provide a large transverse and longitudinal acceptance for the tracking beam in the designed lattice. A new simulation code based on Python for the study of FFAG accelerator beam dynamics has been developed, and the corresponding verification results are also presented.

New accelerator designs: NIMMS

PurposeThis article summarises the presentation given at the “Hadrontherapy: status and perspectives” event.MethodsStructure, methodology, and objectives of the Next Ion Medical Machine Study collaboration are introduced. Its four Work Packages are: small synchrotrons for particle therapy, curved superconducting magnets for synchrotrons and gantries, superconducting gantry design, and high-frequency ion linacs. Synchrotrons under study include a superconducting design for carbon ion therapy, and a normal-conducting design for ions up to helium. Superconducting magnet R&D is carried out in two European projects. Within the scope of these projects, five magnet demonstrators with different technologies are in different phases of design and production. Beam optics and mechanical design of a superconducting gantry for carbon ions is being developed. A high-frequency linac design has been completed, and tests are starting on a prototype high-frequency injector.ResultsThe designs of two facilities based on NIMMS technological developments are presented. A carbon ion research and therapy facility was designed for the SEEIIST project, based on a conventional synchrotron with high beam intensity. A smaller facility aimed at cancer therapy and research with light ions, in particular helium beams has also been designed. Both facilities can produce FLASH-type beams.ConclusionsThe traditional design of carbon ion therapy facilities can be improved by adding new features as higher beam intensity and new beam extraction schemes. A cost-effective alternative to the traditional design is a compact facility for light ions, exploiting the potential for treatment with helium ions and allowing an experimental programme with different ion species.

Longitudinal ion-clearing mechanism in space-charge neutralization of low energy beams

In electron guns, generating high-intensity beams comes with the cost of increasing the number of secondary ions produced by the residual gas ionization which can be a limiting factor in the cathode lifetime. However, it is often overlooked that the longitudinal potential generated by the beam can be the main factor influencing secondary ions to drift back toward the source and limit the maximum beam intensity. Using 3D simulations, this paper shows how the flux of trapped ions depends on the beam parameters. The results provide a practical framework that can be used as a guide in the design of the electron gun focal point to mitigate the ion back bombardment. Published by the American Physical Society 2024