High-field Magnetic Resonance Imaging Scanners Research Articles

Effect of Magnetic Resonance Imaging on the Motion Accuracy of Magnetic Resonance Imaging-compatible Focused Ultrasound Robotic System

Purpose: The current study provides insights into the challenges of safely operating a magnetic resonance imaging (MRI)-guided focused ultrasound (MRgFUS) robotic system in a high-field MRI scanner in terms of robotic motion accuracy. Materials and Methods: Grid sonications were carried out in phantoms and excised porcine tissue in a 3T MRI scanner using an existing MRgFUS robotic system. Fast low-angle shot-based magnetic resonance thermometry was employed for the intraprocedural monitoring of thermal distribution. Results: Strong shifting of the heated spots from the intended points was observed owing to electromagnetic interference (EMI)-induced malfunctions in system’s operation. Increasing the slice thickness of the thermometry sequence to at least 8 mm was proven an efficient method for preserving the robotic motion accuracy. Conclusions: These findings raise awareness about EMI effects on the motion accuracy of MRgFUS robotic devices and how they can be mitigated by employing suitable thermometry parameters.

Improving portable low-field MRI image quality through image-to-image translation using paired low- and high-field images

Low-field portable magnetic resonance imaging (MRI) scanners are more accessible, cost-effective, sustainable with lower carbon emissions than superconducting high-field MRI scanners. However, the images produced have relatively poor image quality, lower signal-to-noise ratio, and limited spatial resolution. This study develops and investigates an image-to-image translation deep learning model, LoHiResGAN, to enhance the quality of low-field (64mT) MRI scans and generate synthetic high-field (3T) MRI scans. We employed a paired dataset comprising T1- and T2-weighted MRI sequences from the 64mT and 3T and compared the performance of the LoHiResGAN model with other state-of-the-art models, including GANs, CycleGAN, U-Net, and cGAN. Our proposed method demonstrates superior performance in terms of image quality metrics, such as normalized root-mean-squared error, structural similarity index measure, peak signal-to-noise ratio, and perception-based image quality evaluator. Additionally, we evaluated the accuracy of brain morphometry measurements for 33 brain regions across the original 3T, 64mT, and synthetic 3T images. The results indicate that the synthetic 3T images created using our proposed LoHiResGAN model significantly improve the image quality of low-field MRI data compared to other methods (GANs, CycleGAN, U-Net, cGAN) and provide more consistent brain morphometry measurements across various brain regions in reference to 3T. Synthetic images generated by our method demonstrated high quality both quantitatively and qualitatively. However, additional research, involving diverse datasets and clinical validation, is necessary to fully understand its applicability for clinical diagnostics, especially in settings where high-field MRI scanners are less accessible.

Longer duration entry mitigates nystagmus and vertigo in 7-Tesla MRI.

Patients and technologists commonly describe vertigo, dizziness, and imbalance near high-field magnets, e.g., 7-Tesla (T) magnetic resonance imaging (MRI) scanners. We sought a simple way to alleviate vertigo and dizziness in high-field MRI scanners by applying the understanding of the mechanisms behind magnetic vestibular stimulation and the innate characteristics of vestibular adaptation. We first created a three-dimensional (3D) control systems model of the direct and indirect vestibulo-ocular reflex (VOR) pathways, including adaptation mechanisms. The goal was to develop a paradigm for human participants undergoing a 7T MRI scan to optimize the speed and acceleration of entry into and exit from the MRI bore to minimize unwanted vertigo. We then applied this paradigm from the model by recording 3D binocular eye movements (horizontal, vertical, and torsion) and the subjective experience of eight normal individuals within a 7T MRI. The independent variables were the duration of entry into and exit from the MRI bore, the time inside the MRI bore, and the magnetic field strength; the dependent variables were nystagmus slow-phase eye velocity (SPV) and the sensation of vertigo. In the model, when the participant was exposed to a linearly increasing magnetic field strength, the per-peak (after entry into the MRI bore) and post-peak (after exiting the MRI bore) responses of nystagmus SPV were reduced with increasing duration of entry and exit, respectively. There was a greater effect on the per-peak response. The entry/exit duration and peak response were inversely related, and the nystagmus was decreased the most with the 5-min duration paradigm (the longest duration modeled). The experimental nystagmus pattern of the eight normal participants matched the model, with increasing entry duration having the strongest effect on the per-peak response of nystagmus SPV. Similarly, all participants described less vertigo with the longer duration entries. Increasing the duration of entry into and exit out of a 7T MRI scanner reduced or eliminated vertigo symptoms and reduced nystagmus peak SPV. Model simulations suggest that central processes of vestibular adaptation account for these effects. Therefore, 2-min entry and 20-s exit durations are a practical solution to mitigate vertigo and other discomforting symptoms associated with undergoing 7T MRI scans. In principle, these findings also apply to different magnet strengths.

Acoustic Noise Levels in High-field Magnetic Resonance Imaging Scanners.

7-Tesla (T) magnetic resonance imaging may allow for higher resolution images but may produce greater acoustic noise than 1.5- and 3-T scanners. We sought to characterize the intensity of acoustic noise from 7- versus 3-T scanners. A-weighted sound pressure levels from 5 types of pulse sequences used for brain and inner ear imaging in 3- and 7-T scanners were measured. Time-averaged sound level and maximum sound levels generated for each sequence were compared. Time-averaged sound levels exceeded 95 dB and reached maximums above 105 dB on the majority of 3- and 7-T scans. The mean time-averaged sound level and maximum sound level across pulse sequences were greater in 7- than 3-T (105.6 vs 91.4, P = .01; 114.0 vs. 96.5 dB, P < .01). 7- and 3-T magnetic resonance imaging scanners produce high levels of acoustic noise that exceed acceptable safety limits, emphasizing the need for active and passive noise protection.

Method for non-invasive assessment of the effect of biologically active substances on the rate of the pH level restoration in the muscle after maximum load using 1H MRS

Purpose of the study: To determine the possibility of a non-invasive evaluation of the biologically active substances (BAS) effect on the rate of a pH level restoration in a muscle after a maximum load using 1H magnetic resonance spectroscopy (MRS).Materials and methods. Creatine monohydrate and beta-alanine were taken as tested biologically active substances, used according to the manufacturer's recommendations. At the first stage, calibration curves of a pH dependence on the magnitude of chemical shifts were plotted during assigning 1H spectra of model carnosine dipeptide solutions for non-invasive determination of intramuscular pH. Further experiments were carried out on laboratory animals (mice) using a 9 T NMR spectrometer Bruker Advance III WB 400MHz WB (Bruker, Germany). In experiments on volunteers the functional test pwc170 was used for assessing the ergogenic effects of biologically active substances on rectus quadriceps femoris. The test allows to achieve the level of myocytes cytoplasm acidification with lactate, and the effectiveness of functional biologically active substances on endurance, and also the function of aerobic systems by the muscle pH rate of recovery. Detection was performed using a high-field magnetic resonance imaging scanner (Philips Healthcare, Achieva 3.0T, North Braband, The Netherlands) and two SENSE Flex-L surface ring radiofrequency coils.Results. The effect of oral intake of creatine and beta-alanine on the restoration of rectus quadriceps femoris muscle pH after an acidification of the myocytes cytoplasm with lactate was evaluated using the 1H MRS method. Reproducible results with optimal signal-to-noise ratios and width of carnosine spectral peaks were achieved in volunteers using individual protocols and 1H MRS at 3T in the quadriceps femoris. Animal experiments have highlighted the need to develop and use more accurate techniques for voxel extraction and fat suppression during in vivo 1H spectroscopy to reliably capture the chemical shifts of carnosine peaks.Conclusion. The data obtained using 1H MRS on volunteers allow us to conclude that the developed method makes it possible to non-invasively assess the effect of biologically active substances on the rate of restoration of pH level in a muscle after a critical load in real time in vivo.

Design of a double acting pneumatic cartilage loading device for magnetic resonance imaging

Studies of osteoarthritis initiation and progression that measure strain in cartilage require physiological loading levels. Many studies use magnetic resonance (MR) imaging, which necessitates a MR-compatible loading device. In this study, the design and validation of a new device, the cartilage compressive actuator (CCA), is presented. The CCA is designed for high-field (e.g., 9.4 T) small-bore MR scanners, and meets a number of design criteria. These criteria include capability for testing bone-cartilage samples, MR compatibility, constant load and incremental strain application, a water-tight specimen chamber, remote control, and real time displacement feedback. The mechanical components in the final design include an actuating piston, a connecting chamber, and a sealed specimen chamber. An electro-pneumatic system applies compression, and an optical Fibre-Bragg grating (FBG) sensor provides live displacement feedback. A logarithmic relationship was observed between force exerted by the CCA and pressure (R2 = 0.99), with a peak output force of 653 ± 2 N. The relationship between FBG sensor wavelength and displacement was linear when calibrated both outside (R2 = 0.99) and inside (R2 = 0.98) the MR scanner. Average slope was similar between the two validation tests, with a slope of −4.2 nm/mm observed inside the MR scanner and −4.3 to −4.5 nm/mm observed outside the MR scanner. This device meets all design criteria and represents an improvement over published designs. Future work should incorporate a closed feedback loop to allow for cyclical loading of specimens.

Multibranched-Based Fluorinated Materials: Tailor-Made Design of 19F-MRI Probes

ConspectusFuture medicine is primarily aiming at the development of novel approaches for an early diagnosis of diseases and a personalized therapy for patients. For achieving these objectives, a key role is played by medical imaging. Among available noninvasive imaging techniques, Fluorine-19 (19F) Magnetic Resonance Imaging (MRI) is emerging as a powerful quantitative detection modality for clinical use both for molecular imaging and for cell tracking.The strength of using 19F-MRI is mainly related to the lack of endogenous organic fluorine in tissues, with no background, enabling the visualization of fluorinated tracers as hot-spot images, adding secondary independent information to the anatomical features provided by the grayscale 1H-MRI. The main challenge for 19F-MRI clinical application is the intrinsic reduced sensitivity of MRI. To improve sensitivity, undoubtedly the use of a high field MRI scanner and cryogenic radiofrequency probes is advantageous, but there is a clear need of developing increasingly effective fluorinated tracers.The ideal tracer should bear as many as possible magnetically equivalent fluorine atoms and show optimal magnetic resonance relaxivity properties (i.e., T1 and T2), which enable reduced acquisition time with the possibility to apply fast imaging methods. Moreover, it should be biocompatible with reduced tendency to bioaccumulate in tissues, which is one of the main drawbacks in using perfluorocarbons (PFCs), together with their difficulty to be chemically modified with functional groups. In fact, PFCs such as perfluorooctyl bromide (PFOB), perfluoro-15-crown-5-ether (PFCE), and linear perfluoropolyethers (PFPE) are currently the most used tracers in 19F-MRI preclinical and clinical studies, with the above-mentioned limitations. In this regard, molecules bearing short branched fluorinated chains gained a lot of attention for their high number of equivalent fluorines and expected capability of reducing bioaccumulation concerns. A valuable building block for branched fluorinated tracers is perfluoro-tert-butanol (PFTB), with nine magnetically equivalent fluorines and easy availability and modification.In this Account we will discuss the main challenges that 19F-MRI has to overcome for increasing its clinical use, highlighting on one hand the need of developing customized fluorinated materials for increasing sensitivity and enabling multimodal properties, and on the other hand, the importance of the ultrastructure of the final formulation for the final biological response (i.e., clearance). In this context, our group has been focusing on the synthesis and development of branched fluorinated tracers, for which the originator is a molecule called PERFECTA (from suPERFluorinatEdContrasT Agent), bearing 36 equiv 19F atoms, which showed not only optimal relaxometry properties but also a very specific and intense Raman signal. Thus, PERFECTA and its derivatives represent a new family of multimodal tracers enabling multiscale analysis, from whole body imaging (19F-MRI) to microscopic detection at the cellular/tissue level (Raman microscopy). We believe that our proposed PFTB strategy can strongly promote the production of increasingly effective 19F-MRI materials with additional functionalities, facilitating the clinical translation of this imaging modality.

Hybrid magnetic resonance and optoacoustic tomography (MROT) for preclinical neuroimaging

Multi-modal imaging is essential for advancing our understanding of brain function and unraveling pathophysiological processes underlying neurological and psychiatric disorders. Magnetic resonance (MR) and optoacoustic (OA) imaging have been shown to provide highly complementary contrasts and capabilities for preclinical neuroimaging. True integration between these modalities can thus offer unprecedented capabilities for studying the rodent brain in action. We report on a hybrid magnetic resonance and optoacoustic tomography (MROT) system for concurrent noninvasive structural and functional imaging of the mouse brain. Volumetric OA tomography was designed as an insert into a high-field MR scanner by integrating a customized MR-compatible spherical transducer array, an illumination module, and a dedicated radiofrequency coil. A tailored data processing pipeline has been developed to mitigate signal crosstalk and accurately register image volumes acquired with T1-weighted, angiography, and blood oxygenation level-dependent (BOLD) sequences onto the corresponding vascular and oxygenation data recorded with the OA modality. We demonstrate the concurrent acquisition of dual-mode anatomical and angiographic brain images with the scanner, as well as real-time functional readings of multiple hemodynamic parameters from animals subjected to oxygenation stress. Our approach combines the functional and molecular imaging advantages of OA with the superb soft-tissue contrast of MR, further providing an excellent platform for cross-validation of functional readings by the two modalities.

Robotic system for top to bottom MRgFUS therapy of multiple cancer types.

A robotic system for Magnetic Resonance guided Focussed Ultrasound (MRgFUS) therapy of tumours in the breast, bone, thyroid, and abdomen was developed. A special C-shaped structure was designed to be attached to the table of conventional magnetic resonance imaging (MRI) systems carrying 4 computer-controlled motion stages dedicated to positioning a 2.75MHz spherically focussed transducer relative to a patient placed in the supine position. The developed system was evaluated for its MRI compatibility and heating abilities in agar-based phantoms and freshly excised tissue. Compatibility of the system with a clinical high-field MRI scanner was demonstrated. FUS heating in the phantom was successfully monitored by magnetic resonance thermometry without any evidence of magnetically induced phenomena. Cigar-shaped discrete lesions and well-defined areas of overlapping lesions were inflicted in excised tissue by robotic movement along grid patterns. The developed MRgFUS robotic system was proven safe and efficient by ex-vivo feasibility studies.

Design and Evaluation of a Protection Method Based on Controllable Resistance for Meter-Class REBCO No-Insulation Pancake Coils

In this paper, we proposed a variable protective resistor that realizes controllable energy dissipation and temperature inhibition for the no-insulation (NI) HTS coil-systems, during sudden discharging. The resistor is paralleled with the meter-class bore NI coil, which aims to be used in a high-field magnetic resonance imaging scanner (MRI), to avoid burn-out and shorten restart time of the coil when it has to be shut-down during an accident. To establish the relationship between the value of protective resistor, the energy dissipation and the temperature increase during sudden discharging for the NI coil, in this study, a numerical analysis coupled with a partial element equivalent circuit and a thermal analysis was conducted. Based on the results, the mechanism that how a protective resistor shares energy dissipation and inhibits temperature increase, has been clarified. Meanwhile, the effects of the value of protective resistor on the discharging behavior and temperature increase of NI pancake coil during sudden discharging, were also evaluated to verify the feasibility of this protection method in the application of MRI.

Noninvasive multimodal fluorescence and magnetic resonance imaging of whole-organ intervertebral discs.

Low back pain (LBP) is a commonly experienced symptom posing a tremendous healthcare burden to individuals and society at large. The LBP pathology is strongly linked to degeneration of the intervertebral disc (IVD), calling for development of early-stage diagnostic tools for visualizing biomolecular changes in IVD. Multimodal measurements of fluorescence molecular tomography (FMT) and magnetic resonance imaging (MRI) were performed on IVD whole organ culture model using an in-house built FMT system and a high-field MRI scanner. The resulted multimodal images were systematically validated through epifluorescence imaging of the IVD sections at a microscopic level. Multiple image contrasts were exploited, including fluorescence distribution, anatomical map associated with T1-weighted MRI contrast, and water content related with T2 relaxation time. The developed multimodality imaging approach may thus serve as a new assessment tool for early diagnosis of IVD degeneration and longitudinal monitoring of IVD organ culture status using fluorescence markers.

2D Gadolinium Oxide Nanoplates as T1 Magnetic Resonance Imaging Contrast Agents.

Millions of people a year receive magnetic resonance imaging (MRI) contrast agents for the diagnosis of conditions as diverse as fatty liver disease and cancer. Gadolinium chelates, which provide preferred T1 contrast, are the current standard but face an uncertain future due to increasing concerns about their nephrogenic toxicity as well as poor performance in high-field MRI scanners. Gadolinium-containing nanocrystals are interesting alternatives as they bypass the kidneys and can offer the possibility of both intracellular accumulation and active targeting. Nanocrystal contrast performance is notably limited, however, as their organic coatings block water from close interactions with surface Gadoliniums. Here, these steric barriers to water exchange are minimized through shape engineering of plate-like nanocrystals that possess accessible Gadoliniums at their edges. Sulfonated surface polymers promote second-sphere relaxation processes that contribute remarkable contrast even at the highest fields (r1 = 32.6 × 10-3 m Gd-1 s-1 at 9.4 T). These noncytotoxic materials release no detectable free Gadolinium even under mild acidic conditions. They preferentially accumulate in the liver of mice with a circulation half-life 50% longer than commercial agents. These features allow these T1 MRI contrast agents to be applied for the first time to the ex vivo detection of nonalcoholic fatty liver disease in mice.

Semi-automatic detection of increased susceptibility in multiple sclerosis white matter lesions imaged with 1.5T MRI

ObjectiveThe identification of regions of increased susceptibility (RoIS) in multiple sclerosis (MS) white matter lesions (WML) is currently performed by the radiologist’s visual inspection of magnetic resonance imaging (MRI) data acquired with high-field MRI scanners. The aims of this study were: 1) to define and validate a semi-automatic method for detecting RoIS in WML from quantitative susceptibility maps (QSM) and susceptibility-weighted imaging (SWI) acquired with a 1.5 T MRI scanner; 2) to assess the prevalence of WML with RoIS and the susceptibility in those areas; and 3) to test the association between RoIS in WML and clinical outcomes. MethodsThirty-eight MS patients were scanned on a 1.5 T MRI scanner. T2-hyperintense WML were segmented and superimposed on SWI and QSM images. Two intensity thresholds were defined and consecutively applied for identifying RoIS within WML (thrhyper_QSM to identify QSM hyperintensity within WML and thrhypoSWI to identify SWI hypointensity within WML). The sensitivity and specificity were assessed on a subgroup of subjects. The numbers of WML with RoIS and RoIS volume were determined. Differences between phenotypes and correlations with clinical outcome were tested. ResultsThe method showed good sensitivity (95.6%) and specificity (92.1%). On average, 44.7% of the WML showed RoIS, occupying 11.0% of the total lesion volume, with an average susceptibility of 39.4 ± 12.2 ppb. The number of WML with RoIS was negatively correlated with disease duration (r = −0.342, p = 0.035). ConclusionThe proposed semi-automatic method proved to be suitable for the detection of RoIS in WML at 1.5 T. This approach may be useful in longitudinal studies aiming to monitor susceptibility in WML.

Delineation of the intratemporal facial nerve in a cadaveric specimen on diffusion tensor imaging using a 9.4 T magnetic resonance imaging scanner: a technical note.

The purpose of this study was to determine whether the intratemporal facial nerve could be delineated on 9.4 T magnetic resonance imaging (MRI) using T2-weighted and diffusion tensor imaging (DTI). DTI using a b value of 3000 and an isotropic resolution of 0.4mm3 on a 9.4 T MRI scanner was performed on a whole-block celloidin-embedded cadaveric temporal bone specimen of a 1-year-old infant with normal temporal bones. The labyrinthine, tympanic, and mastoid segments of the facial nerve and the chorda tympani nerve were readily depicted on DTI. Therefore, DTI performed using a high b value on a high-field strength MRI scanner could help evaluate the intratemporal facial nerve in whole temporal bone ex vivo specimens.

The Influence of Magnetic Fields (0.05 T ≤ B ≤ 7 T) on the Response of Personal Thermoluminescent Dosimeters to Ionizing Radiation

We investigated the main question of whether thermoluminescent dosimeters indicate the correct dose when exposed to magnetic fields from low stray fields up to high magnetic resonance imaging fields inside human magnetic resonance imaging scanners (0.05 T ≤ B ≤ 7 T) during and after irradiation. Medical personnel working in radiology, oncology, or nuclear medicine are regularly monitored with thermoluminescent dosimeters. They might also enter the magnetic field of a magnetic resonance imaging scanner while supervising patients as well as during positron emission tomography-magnetic resonance imaging and magnetic resonance imaging-linac integrated imaging systems and will therefore be exposed to the magnetic fields of magnetic resonance imaging scanners and low stray fields of several millitesla outside of the magnetic resonance imaging scanner, not only before and after, but also during irradiation. Panasonic thermoluminescent dosimetry badges and ring dosimeters for personal monitoring were exposed to magnetic fields originating from a 7 T and a 3 T magnetic resonance imaging scanner as well as neodymium permanent magnets. Four different sealed Cs sources were used in two sets of experiments: (1) magnetically induced fading: irradiated thermoluminescent dosimeters (D ≈ 100 mSv) were exposed to a strong magnetic field (B = 7 T) of a human high-field magnetic resonance imaging scanner after irradiation; no magnetically induced fading (magnetoluminescence) for LiBO:Cu or CaSO:Tm was observed; (2) magnetically induced attenuation: thermoluminescent dosimeters were placed during irradiation in a magnetic field for about 60 h; a significantly reduced dose response was observed for LiBO:Cu-interestingly not at maximum B ≈ 7 T but at B ≈ 0.2 T. This experimental observation is possibly relevant especially for medical and technical personnel in nuclear medicine before and during a magnetic resonance imaging scanning procedure. Follow-up studies need to be made to clarify the kinetics of this effect.

MRI-guided treatment in the breast.

In the last decades, an increasing interest has developed towards non-invasive breast lesion treatments, which offer advantages such as the lack of surgery-related complications, better cosmetic outcomes, and less psychological distress. In addition, these treatments could be an option for patients with poor health who are not candidates for surgery. Non-surgical ablation can be performed under magnetic resonance (MR) or ultrasound (US) guidance. US is cheaper and easily available, while contrast-enhanced MR is more accurate, ensuring better safety and efficacy for the patient. Overall results of studies about MRI-guided tumor ablation reported complete ablation rates ranging between 20% and 100%. High-intensity focused ultrasound (HIFU or FUS) is the most studied ablative technique and it is already established as a valid technique for ablation of benign and malignant tumors in various organs. Ultrasound-guided FUS is very useful for young patients who refuse surgery or with multiple nodules; however, MR-guided FUS is more sensitive and allows a better evaluation of thermal accumulation within the ablated tissue or the adjacent structures. Most MR-guided FUS studies used a dedicated high-field MR scanner and complete tumor ablation was reported in 17-90% of cases. Other techniques using thermal tissue destruction are radiofrequency ablation (RFA) and laser interstitial thermal therapy (LITT). Only a few studies assessed the efficacy of these treatments, all were performed with open MR devices. RFA showed complete tumor ablation in 30-96% of patients, while LITT in 10-71%, but all the studies had a small number of patients. Cryoablation obtains tissue ablation by a rapid decrease of temperature, with a complete tumor removal reported in 18-52% of cases with MR guidance. No serious complications were reported with these techniques. Currently, breast conservative surgery replaced radical surgery when possible. Therefore, future research should focus on these treatments to shift towards an even less invasive approach to breast neoplasms. Level of Evidence: 5 Technical Efficacy: Stage 5 J. Magn. Reson. Imaging 2018;48:1479-1488.

HoF3 and DyF3 Nanoparticles as Contrast Agents for High‐Field Magnetic Resonance Imaging

AbstractClinical contrast agents (CAs) currently used in magnetic resonance imaging (MRI) at low fields are less effective at high magnetic fields. The development of new CAs is mandatory to improve diagnostic capabilities of the new generation of high field MRI scanners. The purpose of this study is to synthesize uniform, water dispersible LnF3 (Ln = Ho, Dy) nanoparticles (NPs) and to evaluate their relaxivity at high magnetic field (9.4 T) as a function of size and composition. Two different types of HoF3 NPs are obtained by homogeneous precipitation in ethylene glycol at 120 °C. The use of holmium acetate as holmium precursor leads to rhombus‐like nanoparticles, while smaller, ellipsoid‐like nanoparticles are obtained when nitrate is used as the holmium salt. To explain this behavior, the mechanism of formation of both kinds of particles is analyzed in detail. Likewise, rhombus‐like DyF3 nanoparticles are prepared following the same method as for the rhombus‐like HoF3 nanoparticles. We have found, to the best of knowledge, the highest transverse relaxivity values at 9.4 T described in the literature for this kind of CAs. Finally, the LnF3 NPs have shown negligible cytotoxicity for C6 rat glioma cells for concentrations up to 0.1 mg mL−1.

Detection Method for a Local Normal-State Transition in a No-Insulation REBCO Pancake Coil

In this paper, we have proposed a detection method for detecting and locating a local normal-state transition in a meter-class no-insulation (NI) coil that is deployed in next-generation high-field magnetic resonance imaging scanners (MRIs), using a copper pickup coil. There are two schemes for detecting and locating the normal zone: one is a ring pickup coil assembled on the midplane of a central bore and the other consists of several sector pickup coils deployed on the coil winding, namely “scanning pickup coil.” To verify the effectiveness of these detection methods, we performed a numerical simulation coupling consisting of a partial element equivalent circuit, a thermal analysis, and a magnetic field analysis. Based on the results of analyses, we reproduced the distributions of the temporal variations of the magnetic flux in the central bore and on the coil winding of the meter-class NI coil, and discussed the effectiveness of these pickup coil schemes for detecting and locating a local normal-state transition in a meter-class NI coil used in next-generation high-field MRIs.

Single-sided NMR for the diagnosis of osteoporosis: Diffusion weighted pulse sequences for the estimation of trabecular bone volume fraction in the presence of muscle tissue

The bone volume fraction, defined as the Bone-Volume-To-Total-Volume ratio (BV/TV), is an important parameter in the assessment of the bone's micro-structure, and is related to the fracture risk in osteoporosis. Although Magnetic Resonance Imaging (MRI) can assess bone micro-architecture parameters in-vivo, high-field whole body MRI scanners are hardly suitable for wide-scale screening campaigns. Recently, a new NMR application to assess in laboratory the BV/TV of trabecular bone (TB) has been proposed using low-field single-sided NMR. This paper presents an improvement of this technique that allows detection of only the signal from the marrow in the TB suppressing signals from other tissues, which may be present in the sensitive volume of single-sided scanners in a real scenario. The improvement was achieved by filtering signal acquisition by molecular diffusion. Experiments based on an ad-hoc designed Diffusion Weighted T1−T2 pulse sequence have demonstrated that muscle and cartilage signals can be suppressed by using diffusion weighting. On the basis of those experiments, a 1D measurement was established to allow correct estimation of the BV/TV of a TB sample also in the presence of muscle tissue in the sensitive volume of the NMR-scanner. The experiments presented, carried out with the NMR-MOUSE PM10 and the NMR-MOLE, exploiting diffusion-weighted pulse sequences, may pave the way for the in-vivo BV/TV evaluation using single-sided scanners.

Evaluation of exposure to (ultra) high static magnetic fields during activities around human MRI scanners.

To assess the individual exposure to the static magnetic field (SMF) and the motion-induced time-varying magnetic field (TVMF) generated by activities in an inhomogeneous SMF near high and ultra-high field magnetic resonance imaging (MRI) scanners. The study provides information on the level of exposure to high and ultra-high field MRI scanners during research activities. A three-axis Hall magnetometer was used to determine the SMF and TVMF around human 3- and 7-Tesla (T) MRI systems. The 7-T MRI scanner used in this study was passively shielded and the 3-T scanner was actively shielded and both were from the same manufacturer. The results were compared with the exposure restrictions given by the International Commission on Non-Ionizing Radiation Protection (ICNIRP). The recorded exposure was highly variable between individuals, although they followed the same instructions for moving near the scanners. Maximum exposure values of B=2057mT and dB/dt=4347mT/s for the 3-T scanner and B=2890mT, dB/dt=3900mT/s for 7T were recorded. No correlation was found between reporting the MRI-related sensory effects and exceeding the reference values. According to the results of our single-center study with five subjects, violation of the ICNIRP restrictions for max B in MRI research environments was quite unlikely at 3 and 7T. Occasions of exceeding the dB/dt limit at 3 and 7T were almost similar (30% of 60 exposure scenarios) and highly variable among the individuals.