High-energy X-ray Research Articles

The High-Energy X-ray Probe (HEX-P): the circum-nuclear environment of growing supermassive black holes

Ever since the discovery of the first active galactic nuclei (AGN), substantial observational and theoretical effort has been invested into understanding how massive black holes have evolved across cosmic time. Circum-nuclear obscuration is now established as a crucial component, with almost every AGN observed known to display signatures of some level of obscuration in their X-ray spectra. However, despite more than six decades of effort, substantial open questions remain: how does the accretion power impact the structure of the circum-nuclear obscurer? What are the dynamical properties of the obscurer? Can dense circum-nuclear obscuration exist around intrinsically weak AGN? How many intermediate mass black holes occupy the centers of dwarf galaxies? In this paper, we showcase a number of next-generation prospects attainable with the High-Energy X-ray Probe (HEX-P1) to contribute toward solving these questions in the 2030s. The uniquely broad (0.2–80 keV) and strictly simultaneous X-ray passband of HEX-P makes it ideally suited for studying the temporal co-evolution between the central engine and circum-nuclear obscurer. Improved sensitivities and reduced background will enable the development of spectroscopic models complemented by current and future multi-wavelength observations. We show that the angular resolution of HEX-P both below and above 10 keV will enable the discovery and confirmation of accreting massive black holes at both low accretion power and low black hole masses even when concealed by thick obscuration. In combination with other next-generation observations of the dusty hearts of nearby galaxies, HEX-P will be pivotal in paving the way toward a complete picture of black hole growth and galaxy co-evolution.

Vertically Oriented Quasi-2D Perovskite Grown In-Situ by Carbonyl Array-Synergized Crystallization for Direct X-Ray Detectors.

Quasi-2D perovskite quantum wells are increasingly recognized as promising candidates for direct-conversion X-ray detection. However, the fabrication of oriented and uniformly thick quasi-2D perovskite films, crucial for effective high-energy X-ray detection, is hindered by the inherent challenges of preferential crystallization at the gas-liquid interface, resulting in poor film quality. In addressing this limitation, a carbonyl array-synergized crystallization (CSC) strategy is employed for the fabrication of thick films of a quasi-2D Ruddlesden-Popper (RP) phase perovskite, specifically PEA2MA4Pb5I16. The CSC strategy involves incorporating two forms of carbonyls in the perovskite precursor, generating large and dense intermediates. This design reduces the nucleation rate at the gas-liquid interface, enhances the binding energies of Pb2+ at (202) and (111) planes, and passivates ion vacancy defects. Consequently, the construction of high-quality thick films of PEA2MA4Pb5I16 RP perovskite quantum wells is achieved and characterized by vertical orientation and a pure well-width distribution. The corresponding PEA2MA4Pb5I16 RP perovskite X-ray detectors exhibit multi-dimensional advantages in performance compared to previous approaches and commercially available a-Se detectors. This CSC strategy promotes 2D perovskites as a candidate for next-generation large-area flat-panel X-ray detection systems.

Structure and particle surface analysis of Li2S–P2S5–LiI-type solid electrolytes synthesized by liquid-phase shaking

Li2S–P2S5–LiI-type solid electrolytes, such as Li4PS4I, Li7P2S8I, and Li10P3S12I, are promising candidates for anode layers in all-solid-state batteries because of their high ionic conductivity and stability toward Li anodes. However, few studies have been conducted on their detailed local structure and particle surface state. In this study, Li7P2S8I (Li2S: P2S5:LiI = 3:1:1) solid electrolytes as the chemical composition were synthesized by mechanical milling and liquid-phase shaking, and their local structures were analyzed by transmission electron microscopy. The particle surface states were analyzed by X-ray photoelectron spectroscopy, high-energy X-ray scattering measurements, and neutron total scattering experiments. The results showed that Li7P2S8I solid electrolytes are composed of nanocrystals, such as Li4PS4I, LiI, Li10P3S12I and an amorphous area as the main region, indicating that the crystalline components alone do not form ionic conductive pathways, with both the amorphous and crystalline regions contributing to the high ionic conductivity. Moreover, the ionic conductivity of the crystalline/amorphous interface of the glass-ceramic was higher than that of the Li2S–P2S5–LiI glass. Finally, an organic-solvent-derived stable surface layer, which was detected in the liquid-phase shaking sample, served as one of the factors that contributed to its high stability (which surpassed that of the mechanically milled sample) toward lithium anodes. We expect these findings to enable the effective harnessing of particle surface states to develop enhanced sulfide solid electrolytes.

The effect of double intercritical annealing on micromechanical behavior of a medium Mn transformation induced plasticity steel investigated by in situ high energy X-ray diffraction

The micromechanical behavior of a medium Mn transformation induced plasticity (TRIP) steel processed by intercritical annealing (IA) and double intercritical annealing (DIA) has been investigated by using in situ high energy X-ray diffraction during uniaxial tensile deformation. The results show that the ultimate tensile strength (UTS) and total elongation are 777.1 MPa and 39.6 % for IA and 953.6 MPa and 59.1 % for DIA, and that the product of UTS and total elongation is 30.8 GPa·% for IA and 56.4 GPa·% for DIA, respectively. Discontinuous phase transformation from austenite to martensite leads to Portevin-Le Châtelier (PLC) band propagation for both IA and DIA. The pronounced TRIP effect takes place in DIA step by step during deformation and contributes to higher strain hardening, which results in almost doubling the product of UTS and total elongation. The stepwise phase transformation highly corresponds to the lattice strain evolution of ferrite and austenite, indicating that load partitioning occurs during the deformation. The change of grain structure generated by different heat-treatments correlate with the load partitioning, thereby inducing large discrepancy in micromechanical behavior. The present investigation provides a deeper fundamental understanding of the effect of double inter-critical annealing on micromechanical behavior and effective engineering strategies for improving the product of UTS and total elongation for the medium Mn TRIP steels.

UMobileNetV2 model for semantic segmentation of gastrointestinal tract in MRI scans.

Gastrointestinal (GI) cancer is leading general tumour in the Gastrointestinal tract, which is fourth significant reason of tumour death in men and women. The common cure for GI cancer is radiation treatment, which contains directing a high-energy X-ray beam onto the tumor while avoiding healthy organs. To provide high dosages of X-rays, a system needs for accurately segmenting the GI tract organs. The study presents a UMobileNetV2 model for semantic segmentation of small and large intestine and stomach in MRI images of the GI tract. The model uses MobileNetV2 as an encoder in the contraction path and UNet layers as a decoder in the expansion path. The UW-Madison database, which contains MRI scans from 85 patients and 38,496 images, is used for evaluation. This automated technology has the capability to enhance the pace of cancer therapy by aiding the radio oncologist in the process of segmenting the organs of the GI tract. The UMobileNetV2 model is compared to three transfer learning models: Xception, ResNet 101, and NASNet mobile, which are used as encoders in UNet architecture. The model is analyzed using three distinct optimizers, i.e., Adam, RMS, and SGD. The UMobileNetV2 model with the combination of Adam optimizer outperforms all other transfer learning models. It obtains a dice coefficient of 0.8984, an IoU of 0.8697, and a validation loss of 0.1310, proving its ability to reliably segment the stomach and intestines in MRI images of gastrointestinal cancer patients.

Structure of TeO2 Glass and Melt by Reverse Monte Carlo Simulations of High-Energy X-Ray Diffraction Data Sets.

The short-range and medium-range structures of TeO2 glass and melt are elucidated by Reverse Monte Carlo (RMC) simulations of High-Energy X-ray Diffraction data sets published in an earlier study by Alderman et al. (J. Phys. Chem. Lett.11(1) (2020)427-431). The RMC analysis reveals that there exists a wide range of Te-O bond lengths in both TeO2 glass and melt short-range structures. The Te-O pair distribution function (PDF) of the melt has peaks centered at 1.87, 2.06, 2.35, 2.65, and 3.00 (±0.01) Å, whereas the corresponding peaks in the glass are at 1.91, 2.07, 2.28, 2.54, 2.77, and 3.00 (±0.01) Å. The Te-O partial PDF of the melt shows a peak at 2.35 Å, which is not present in the glass structure; therefore, the same co-ordination sphere radius of 2.36 Å cannot be used for calculating the Te-O co-ordination numbers in the TeO2 melt and glass, as done in the earlier study by Alderman et al. Using a more appropriate radius of 2.41 Å for glass and 2.22 Å for the melt, the corresponding Te-O co-ordination numbers are found to be 3.99 and 3.33, respectively. The RMC analysis successfully determined the O-O pair distributions, which show the first peaks at 2.31-2.33 (±0.01) Å. Finally, Te-Te pair distributions show peaks at slightly longer distances in the melt compared to those in glass, and the melt is found to have greater medium-range disorder.

Comparative studies of GaN, n-GaN and n+-GaN contact layers on GaN/c-Al2O3 virtual substrates synthesized by PA MBE

An approach to create ohmic contacts to GaN layers without using the high-temperature annealing procedure is described in the paper. The results of comparative studies of structural, morphological, optical, and electrical properties of undoped GaN and silicon-doped n-GaN and n+-GaN doped contact layers are presented.The contact layer technology can be successfully realized using a plasma-assisted molecular beam epitaxy (PA MBE) setup of industrial type, where due to characteristic design features, the growth of nitride AIIIN compounds occurs using small streams of activated nitrogen, which significantly limits the possibility of varying the technological parameters.For the first time it is demonstrated that using the proposed technology for the creation of post-grown GaN, n-GaN and n+-GaN contact layers to GaN/c-Al2O3 virtual substrates in Ga-enriched conditions of epitaxial PA MBE growth at relatively low temperatures Ts = 700oC an effective filtration of dislocations threading from the buffer GaN layer of the virtual substrate formed by MOCVD can be realized.Calculations of in-plane εxx and out-of-plane εzz deformations, as well as residual biaxial stresses based on X-ray diffraction and Raman microspectroscopy data indicate at high structural quality of the formed contact layer regardless of the silicon doping level. At the same time PA MBE contact layers GaN, n-GaN and n+-GaN demonstrate close optical properties (refractive index and photoluminescence) in a wide range (400–850 nm), as well as minimal influence of defects associated with the formation of silicon clusters at high doping levels.The contact resistance reduced to the pad width determined using the transmission line method for the structure with n+-GaN contact layer was of ∼0.11 Ohm*mm and ∼0.5 Ohm*mm for n-GaN. Note that electrophysical characteristics of n-GaN and n+-GaN contact layers do not degrade under high-dose exposure of high-energy X-ray irradiation.The technique developed in our work to create ohmic contacts to GaN layers, as well as the obtained experimental results, have important implications for understanding the physics of AIIIN nanoheterostructures and will contribute to their potential applications in their fabrication.

Behavior of Microstrain in Nd3+-Sensitized Near-Infrared Upconverting Core-Shell Nanocrystals for Defect-Induced Tailoring of Luminescence Intensity.

In an attempt to optimize the upconversion luminescence (UCL) output of a Nd3+-sensitized near-infrared (808 nm) upconverting core-shell (CS) nanocrystal through deliberate incorporation of lattice defects, a comprehensive analysis of microstrain both at the CS interface and within the core layer was performed using integral breadth calculation of high-energy synchrotron X-ray (λ = 0.568551 Å) diffraction. An atomic level interpretation of such microstrain was performed using pair distribution function analysis of the high-energy total scattering. The core NC developed compressive microstrain, which gradually transformed into tensile microstrain with the growth of the epitaxial shell. Such a reversal was rationalized in terms of a consistent negative lattice mismatch. Upon introduction of lattice defects into the CS systems upon incorporation of Li+, the corresponding UCL intensity was maximized at some specific Li+ incorporation, where the tensile microstrain of CS, compressive microstrain of the core, and atomic level disorders exhibited their respective extreme values irrespective of the activator ions.

Investigating Model Dependencies for Obscured Active Galactic Nuclei: A Case Study of NGC 3982

Abstract X-ray spectroscopy of heavily obscured active galactic nuclei (AGN) offers a unique opportunity to study the circumnuclear environment of accreting supermassive black holes. However, individual models describing the obscurer have unique parameter spaces that give distinct parameter posterior distributions when fit to the same data. To assess the impact of model-specific parameter dependencies, we present a case study of the nearby heavily obscured low-luminosity AGN NGC 3982, which has a variety of column density estimations reported in the literature. We fit the same broadband XMM-Newton+NuSTAR spectra of the source with five unique obscuration models and generate posterior parameter distributions for each. By using global parameter exploration, we traverse the full prior-defined parameter space to accurately reproduce complex posterior shapes and inter-parameter degeneracies. The unique model posteriors for the line-of-sight column density are broadly consistent, predicting Compton-thick N H > 1.5 × 1024 cm−2 at the 3σ confidence level. The posterior median intrinsic X-ray luminosity in the 2–10 keV band was found to differ substantially, however, with values in the range log L 2–10 keV/ erg s−1 = 40.9–42.1 for the individual models. We additionally show that the posterior distributions for each model occupy unique regions of their respective multidimensional parameter spaces and how such differences can propagate into the inferred properties of the central engine. We conclude by showcasing the improvement in parameter inference attainable with the High Energy X-ray Probe, with its uniquely broad, simultaneous, and high-sensitivity bandpass of 0.2–80 keV.

High throughput automated characterization of enamel microstructure using synchrotron tomography and optical flow imaging

The remarkable damage-tolerance of enamel has been attributed to its hierarchical microstructure and the organized bands of decussated rods. A thorough characterization of the microscale rod evolution within the enamel is needed to elucidate this complex structure. While prior efforts in this area have made use of single particle tracking to track a single rod evolution to various degrees of success, such a process can be both computationally and labor intensive, limited to the evolution path of a single rod, and is therefore prone to error from potentially tracking outliers. Particle image velocimetry (PIV) is a well-established algorithm to derive field information from image sequences for processes that are time-dependent, such as fluid flows and structural deformation. In this work, we demonstrate the use of PIV in extracting the full-field microstructural distribution of rods within the enamel. Enamel samples from a wild African lion were analyzed using high-energy synchrotron X-ray micro-tomography. Results from the PIV analysis provide sufficient full-field information to reconstruct the growth of individual rods that can potentially enable rapid analysis of complex microstructures from high resolution synchrotron datasets. Such information can serve as a template for designing damage-tolerant bioinspired structures for advanced manufacturing. Statement of significanceThorough characterization and analysis of biological microstructures (viz. dental enamel) allows us to understand the basis of their excellent mechanical properties. Prior efforts have successfully replicated these microstructures via single particle tracking, but the process is computationally and labor intensive. In this work, optical flow imaging algorithms were used to extract full-field microstructural distribution of enamel rods from synchrotron X-ray computed tomography datasets, and a field method was used to reconstruct the growth of individual rods. Such high throughput information allows for the rapid production/prototyping and advanced manufacturing of damage-tolerant bioinspired structures for specific engineering applications. Furthermore, the algorithms used herein are freely available and open source to broaden the availability of the proposed workflow to the general scientific community.

Influence of Zr element on the atomic structure of Al-Cu alloy liquid

The relationship among chemical composition, structure and glass-forming ability in multicomponent alloys is a long-standing puzzle due to the complexity of compositions. In this work, Al77.8Cu22.2 and Al70Cu20Zr10 amorphous alloy liquids were investigated by combining high-energy X-ray diffraction at a synchrotron facility, ab-initio molecular dynamics and reverse Monte Carlo simulations. The analysis of short- and medium-range order structures of two liquid alloys show that the addition of Zr element increases the number of cluster types and makes the distribution of cluster content more uniform, and enhances the structural heterogeneity and correlation of clusters with high five-fold symmetry. These findings reveal the influence of Zr element on the atomic structure of the Al-Cu liquid alloy and deepen the understanding of Al-based metallic glasses formation.

Noble-Metal-Free High-Entropy Alloy Nanoparticles for Efficient Solar-Driven Photocatalytic CO2 Reduction.

Metal nanoparticle (NP) cocatalysts are widely investigated for their ability to enhance the performance of photocatalytic materials; however, their practical application is often limited by the inherent instability under light irradiation. This challenge has catalyzed interest in exploring high-entropy alloys (HEAs), which, with their increased entropy and lower Gibbs free energy, provide superior stability. In this study, 3.5nm-sized noble-metal-free NPs composed of a FeCoNiCuMn HEA are successfully synthesized. With theoretic calculation and experiments, the electronic structure of HEA in augmenting the catalytic CO2 reduction has been uncovered, including the individual roles of each element and the collective synergistic effects. Then, their photocatalytic CO2 reduction capabilities are investigated when immobilized on TiO2. HEA NPs significantly enhance the CO2 photoreduction, achieving a 23-fold increase over pristine TiO2, with CO and CH4 production rates of 235.2 and 19.9µmol g-1 h-1, respectively. Meanwhile, HEA NPs show excellent stability under simulated solar irradiation, as well high-energy X-ray irradiation. This research emphasizes the promising role of HEA NPs, composed of earth-abundant elements, in revolutionizing the field of photocatalysis.

Epitaxial growth and magnetic properties of Mn5(SixGe1-x)3 thin films

Structural and magnetic properties of Mn5(SixGe1-x)3 thin films were investigated. Ferromagnetic Mn5Ge3 and anti-ferromagnetic Mn5Si3 thin films have been synthesized and characterized as these compounds exhibit interesting features for the development of spintronics. Here, Mn5(SixGe1-x)3 thin films were grown on Ge(111) substrates by co-deposition using molecular beam epitaxy. Crystalline thin films can be produced with controlled Si concentrations ranging from 0 to 1. The thin films were relaxed by dislocations at the interface with the substrate. A lattice parameter variation was observed as the Si content increased, which is comparable to previous works done in bulk. Reflection high-energy electron diffraction diagrams and X-ray diffraction profiles showed that lattice parameters a and c are shrinking and that the surface roughness and crystallinity degrade as the Si amount increases. Magnetometric measurements revealed a ferromagnetic behavior for all Si concentrations. The measured average ferromagnetic moment per manganese atom decreased from 2.33 to 0.05 μB/Mn atom. No ferro to anti-ferromagnetic transition was observed contrary to the bulk Mn5(SixGe1-x)3 compound.

π-Extended Nonfullerene Acceptor for Compressed Molecular Packing in Organic Solar Cells To Achieve over 20% Efficiency.

Organic photovoltaics (OPVs) suffer from a trade-off between efficient charge transport and suppressed nonradiative recombination due to the aggregation-induced luminance quenching of organic semiconductors. To resolve this grand challenge, a π-extended nonfullerene acceptor (NFA) B6Cl with large voids among the honeycomb network is designed and introduced into photovoltaic systems. We find that the presence of a small amount of (i.e., 0.5 or 1 wt %) B6Cl can compress the molecular packing of the host acceptor L8-BO, leading to shortened π-π stacking distance from 3.59 to 3.50 Å (that will improve charge transport) together with ordered alkyl chain packing (that will inhibit nonradiative energy loss due to the suppressed C-C and C-H bonds vibrations), as validated by high-energy X-ray scattering measurements. This morphology transformation ultimately results in simultaneously improved JSC, FF, and VOC of OPVs. As a result, the maximum PCEs of PM6:L8-BO and D18:L8-BO are increased from 19.1 and 19.3% to 19.8 and 20.2%, respectively, which are among the highest values for single-junction OPVs. The university of B6Cl to increase the performance of OPVs is further evidenced in a range of polymer:NFA OPVs.

Supercritical Gallium Trichloride in Oxidative Metal Recycling: Ga2Cl6 Dimers vs GaCl3 Monomers and Rheological Behavior.

Oxidative recycling of metals is crucial for a circular economy, encompassing the preservation of natural resources, the reduction of energy consumption, and the mitigation of environmental impacts and greenhouse gas emissions associated with traditional mining and processing. Low-melting gallium trichloride appears to be a promising oxidative solvent for rare-earth metals, transuranium elements, platinum, pnictogens, and chalcogens. Typically, oxidative dissolution with GaCl3 occurs at relatively low temperatures over a few days, assuming the presence of tetrahedral Ga-Cl entities. While supercritical gallium trichloride holds the potential for advanced recycling, little is known about its structure and viscosity. Using high-energy X-ray diffraction and multiscale modeling, which includes first-principles simulations, we have revealed a dual molecular nature of supercritical gallium trichloride, consisting of tetrahedral dimers and flat trigonal monomers. The molecular geometry can be precisely tuned by adjusting the temperature and pressure, optimizing the recycling process for specific metals. The derived viscosity, consistent with the reported results in the vicinity of melting, decreases by a factor of 100 above the critical temperature, enabling fast molecular diffusion, and efficient recycling kinetics.

Analysis of X-ray irradiation effects on the mortality values and hemolymph immune cell composition of Apis mellifera and its parasite, Varroa destructor

Varroa destructor is one of the most destructive enemies of the honey bee, Apis mellifera all around the world. Several control methods are known to control V. destructor, but the efficacy of several alternative control methods remains unexplored. Irradiation can be one of these unknown solutions but before practical application, the effectiveness, and the physiological effects of ionizing radiation on the host and the parasite are waiting to be tested. Therefore, the objective of our study was to investigate the effects of different doses (15, 50, 100, and 150 Gy) of high-energy X-ray irradiation through mortality rates and hemocyte composition changes in A. mellifera workers and record the mortality rates of the parasite. The mortality rate was recorded during short-term (12, 24, and 48 h) and long-term periods (3, 6, 12, 18, and 24d).The sensitivity of the host and the parasite in case of the higher doses of radiation tested (50, 100, and 150 Gy) been demonstrated by total mortality of the host and 90 % of its parasite has been observed on the 18th day after the irradiation. V. destructor showed higher sensitivity (1.52-times higher than the adult honey bee workers) at the lowest dose (15 Gy). A. mellifera hemocytes were influenced significantly by radiation dosage and the elapsed time after treatment. The higher radiation doses increased plasmatocyte numbers in parallel with the decrease in prohemocyte numbers. On the contrary, the numbers of granulocytes and oencoytes increased in the treated samples, but the putative effects of the different dosages on the recorded number of these hemocyte types could not be statistically proven. In summary, based on the outcome of our study X-ray irradiation can be deemed an effective tool for controlling phoretic V. destructor. However, further research is needed to understand the physiological response of the affected organisms.

High-pressure X-ray photon correlation spectroscopy at fourth-generation synchrotron sources.

A new experimental setup combining X-ray photon correlation spectroscopy (XPCS) in the hard X-ray regime and a high-pressure sample environment has been developed to monitor the pressure dependence of the internal motion of complex systems down to the atomic scale in the multi-gigapascal range, from room temperature to 600 K. The high flux of coherent high-energy X-rays at fourth-generation synchrotron sources solves the problems caused by the absorption of diamond anvil cells used to generate high pressure, enabling the measurement of the intermediate scattering function over six orders of magnitude in time, from 10-3 s to 103 s. The constraints posed by the high-pressure generation such as the preservation of X-ray coherence, as well as the sample, pressure and temperature stability, are discussed, and the feasibility of high-pressure XPCS is demonstrated through results obtained on metallic glasses.

In-situ synchrotron X-ray diffraction study of the effects of grain orientation on the martensitic phase transformations during tensile loading at different strain rates in metastable austenitic stainless steel

In this work, in-situ high-energy X-ray diffraction was used to analyze the effects of strain rate and austenite (γ) grain orientation on the strain-induced martensitic transformation in metastable austenitic stainless steel 301LN. The diffraction measurements were carried out at strain rates ranging from 10−3 s−1 to 1 s−1 continuously without interrupting the experiment and thus creating nearly adiabatic conditions at the highest studied strain rate. The results indicate that <100>γ fiber-oriented grains preferentially transform at the strain rate of 10−3 s−1 when the true strain is above 0.10, whereas the <111>γ fiber-oriented grains transform only at later stages of plastic deformation. The phase transformation rate of the <111>γ and <100>γ fiber-oriented grains decreases with increase in strain rate. A theoretical model based on stacking fault width as a function of external stress and temperature (stacking fault energy) was used to predict lower-bound estimates for the critical tensile stress needed to start ε-martensite and α’-martensite phase transformations. The model can predict the experimentally observed phase transformation behavior of the <111>γ fiber orientations at all strain rates but is unable to predict the decrease of phase transformation rate of <100> fiber-oriented γ grains with increase in strain rate, which could be related to change in dislocation structure.

Achieving high-strength porous tungsten with wide porosity range via selective dissolution W-Ti-Fe precursor

Porous tungsten with wide porosity variation is considered a candidate for high-energy X-ray flash radiography. This work combines tape casting and dealloying to selectively dissolve a W-Ti-Fe precursor, achieving high-strength porous tungsten with a wide porosity range. The PVB exists on the surface of particles in the form of an amorphous carbon film after pyrolysis, providing conditions for the W-Fe-C interface reaction. The porosity of porous tungsten is 50.7–80.4%. The compressive strengths of porous tungsten with porosity of 50.7% and 80.4% are 221.9 MPa and 10.6 MPa, respectively. The dissolution of the Ti located in the ligament can enhance the porosity of porous tungsten. The coating composed of the solid solution formed at the interface of W and Ti during heat treatment and Fe3W3C can enhance the ligament strength. This work provides a theoretical reference for preparing porous tungsten with a wide porosity range and high performance.

Endowing low fatigue for elastocaloric effect by refined hierarchical microcomposite in additive manufactured NiTiCuCo alloy

NiTiCu-based shape memory alloys have been considered as ideal materials for solid-state refrigeration due to their superb cycling stability for elastocaloric effect. However, the embrittlement and deterioration caused by secondary phase and coarse grains restrict their applications, and it is still challenging since the geometric components are required. Here, bulk NiTiCuCo parts with excellent forming quality were fabricated by laser powder bed fusion (LPBF) technique. The as-fabricated alloy exhibits refined three-phases hierarchical microcomposite formed based on the rapid cooling mode of LPBF, composed of intricate dendritic Ti2Ni–NiTi composite and nano Ti2Cu embedded inside the NiTi-matrix. This configuration endows far superior elastocaloric stability compared to the as-cast counterpart. The low fatigue stems from the strong elastic coupling between the interphases with reversible martensite transformation, revealed by in-situ synchrotron high-energy x-ray diffraction. The fabrication of NiTiCuCo alloy via LPBF fills the bill of complex geometric structures for elastocaloric NiTiCu alloys. The understanding of interphase micro-coupling could provide the guide for designing LPBF fabricated shape memory-based composites, enabling their applications for special demands on other functionalities.