High-energy Laser Research Articles

The realization of the simultaneous wireless information and power transfer with the laser energy transform

Laser Charging means high energy laser beam to irradiate the solar cell to gain electricity power through photovoltaic generation. This kind of wireless energy transform way fits the IoT and other low energy satiation with the benefit of long-distance transmission. In this paper, we present a new way of information transferring while energy is gained which is called Simultaneous Wireless Information and Power Transfer. The main idea is to switch the laser device output power to generate the different PV current values, the dual level of laser power decides two ranges of the value. We imitate the On-Off Keying (OOK) named Low-High Keying(LHK) which turns the information into the energy code with a high or low current value. The issue of information coding is also presented with an example. And the application also provided the realization presented. The new method provides a brand way to Simultaneous Wireless Information and Power transfer without any extra equipment by contrast with others. It's suited for the long-distance, low power and limited information-connected occasions.

High energy laser propagation through natural convection of air: a benchmark for validation of numerical simulation

The study of propagation medium effects on lasers continues to be an active area of research. High energy laser (HEL) propagation through planetary atmosphere is particularly nuanced as the beam generates its own flow field and suffers from additional degrading effects. Herein, we construct experimental setups conducive to probing the physics of the laser-atmosphere interaction and generating validation datasets for high fidelity predictive software. Measured and derived parameters are presented, and predictive models are generated utilizing random forest regression.

Adjustable High-Energy Soliton Fiber Laser Based on a Spatial Alignment Structure

Adjustable High-Energy Soliton Fiber Laser Based on a Spatial Alignment Structure

Uranium Single Particle Analysis for Simultaneous Fluorine and Uranium Isotopic Determinations via Laser-Induced Breakdown Spectroscopy/Laser Ablation-Multicollector-Inductively Coupled Plasma-Mass Spectrometry.

Uranyl fluoride (UO2F2) particles (<20 μm) were subjected to first-of-its-kind analysis via simultaneous laser-induced breakdown spectroscopy (LIBS) and laser ablation multi-collector inductively coupled plasma-mass spectrometry (LA-MC-ICP-MS). Briefly, a nanosecond pulsed high-energy laser was focused onto the sample (particle) surface. In a single laser pulse, the UO2F2 particle was excited/ionized within the microplasma volume, and the emission of light was collected via fiber optics such that emission spectroscopy could be employed for the detection of uranium (U) and fluorine (F). The ablated particle was simultaneously transported into the MC-ICP-MS for high precision isotopic (i.e., 234U, 235U, and 238U) analysis. This method, LIBS/LA-MC-ICP-MS was optimized and employed to rapidly measure 80+ UO2F2 particles, which were subjected to different calcination processes, which results in varying degrees of F loss from the individual particles. In measuring the particles, the average F/U ratios for the populations treated at 100 and 500 °C were 2.78 ± 1.28 and 1.01 ± 0.50, respectively, confirming loss of F through the calcination process. The average 235U/238U on the particle populations for the 100 and 500 °C were 0.007262 (22) and 0.007231 (23), which was determined to be <0.2% from the expected value. The 234U/238U ratios on the same particles were 0.000053 (11) and 0.000050 (10) for the 100 and 500 °C, respectively, <10% from the expected value. Notably, each population was analyzed in under 5 min, demonstrating the truly rapid analysis technique presented here.

Experimental Study of Laser-Induced Cavitation Bubbles near Wall: Plasma Shielding Observation

To investigate the plasma shielding of laser-induced cavitation bubbles near a wall, a pulsed laser with different energies was selected to induce cavitation bubbles on the surface of 7050-T7451 aluminum alloy. A high-speed camera captured the evolution of the cavitation bubble, while a fiber-optic hydrophone system collected the acoustic signals during the evolution. Finally, a confocal microscope was used to view and analyze the surface morphology of 7050 aluminum alloy. The experimental results indicate that as the laser energy increases, the diameter, the evolution time, the pressure of the bubble, and both the pit diameter and depth all increase. Beyond an energy level of 1.4 J, the maximum diameter and the evolution time of the laser-induced cavitation bubble begin to decrease; the maximum diameter decreases by 2.04%, and the first evolution time decreases by 3.26%. Plasma shielding was observed in this experiment. Considering that the essence of a laser-induced cavitation bubble is the interaction between a high-energy laser and a liquid medium, the abnormal decrease in the maximum diameter, evolution time, and sound pressure epitomizes the manifestation of plasma shielding.

High energy and high repetition rate QCW-LD end-pumped electro-optical Q-switched Yb:YAG laser

The quasi-continuous wave laser diode (QCW-LD) pumping is considered as the most efficient way for generating high energy nanosecond pulsed laser with repetition rate ranging from 50 to 1000 Hz. Here, a high efficiency, high repetition rate and high energy QCW-LD end-pumped electro-optical (EO) Q-switched Yb:YAG laser was demonstrated. The shortest pulse duration of 17.4 ns with a maximum single pulse energy of 5.1 mJ was obtained at the repetition rate of 100 Hz. As the repetition rate increases up to 500 Hz, the maximum output single pulse energy was obtained to be 5.38 mJ with the pulse width of 18.7 ns, corresponding to the slope efficiency of 21.6% and beam quality factor of M x 2=1.04, and M y 2=1.01. In addition, a theoretical study was carried by numerical simulation of the rate equations, and the results were agreed well with the experimental ones. The results show that QCW-LD pumping with Yb-doped crystals is a promising way for highly efficient, high-energy and high repetition rate nanosecond pulsed laser generation.

Simulation of the reflection of a high energy laser beam at the sea surface for hazard and risk analyses

The application of a high energy laser beam in a maritime scenario necessitates a laser safety concept to prevent injury to personnel or uninvolved third parties from uncontrolled reflections of laser light from the sea surface. Therefore, it is crucial to have knowledge of the amount and direction of reflected laser energy, which varies statistically and depends largely on the dynamics of the wavy sea surface. These dynamics are primarily influenced by wind speed, wind direction, and fetch. An analytical model is presented for calculating the time-averaged spatial intensity distribution of the laser beam reflected at the dynamic sea surface. The model also identifies the hazard areas inside which laser intensities exceed a fixed exposure limit. Furthermore, as far as we know, our model is unique in its ability to calculate the probabilities of potentially eye-damaging glints for arbitrary observer positions, taking into account the slope statistics of gravity waves. This is a critical first step toward an extensive risk analysis. The simulation results are presented on a hemisphere of observer positions with fixed radii from the laser spot center. The advantage of the analytical model over our numeric (dynamic) model is its fast computation time. A comparison of the results of our new analytical model with those of the previous numerical model is presented.

High-Energy Laser Protection Performance of Fibrous Felt-Reinforced Aerogels with Hierarchical Porous Architectures.

Continuous-wave lasers can cause irreversible damage to structured materials in a very short time. Modern high-energy laser protection materials are mainly constructed from ceramic, polymer, and metal constitutions. However, these materials are protected by sacrificing their structural integrity under the irradiation of high-energy lasers. In this contribution, we reported multilayer fibrous felt-reinforced aerogels that can sustain the continuous irradiation of a laser at a power density of 120 MW·m-2 without structural damage. It is found that the exceptional high-energy laser protection performance and the comparable mechanical properties of aerogel nanocomposites are attributed to the unique characteristics of hierarchical porous architectures. In comparison with various preparation methods and other aerogel materials, multilayer fibrous felt-reinforced aerogels exhibit the best performance in high-energy laser protection, arising from the gradual interception and the Raman-Rayleigh scattering cycles of a high-energy laser in the porous aerogels. Furthermore, a near-zero thermal expansion coefficient and extremely low thermal conductivity at high temperature allow the lightweight felt-reinforced aerogels to be applied in extreme conditions. The felt-reinforced aerogels reported herein offer an attractive material that can withstand complex thermomechanical stress and retain excellent insulation properties at extremely high temperature.

HISOL: High-energy soliton dynamics enable ultrafast far-ultraviolet laser sources

Ultrafast laser sources in the far ultraviolet (100–300 nm) have been the subject of intense experimental efforts for several decades, driven primarily by the requirements of advanced experiments in ultrafast science. Resonant dispersive wave emission from high-energy laser pulses undergoing soliton self-compression in a gas-filled hollow capillary fiber promises to meet several of these requirements for the first time, most importantly by combining wide-ranging wavelength tuneability with the generation of extremely short pulses. In this Perspective, we give an overview of this approach to ultrafast far-ultraviolet sources, including its historical origin and underlying physical mechanism, the state of the art and current challenges, and our view of potential applications both within and beyond ultrafast science.

Focal cone high harmonic generation driven by a 400 TW laser

The generation of self-focusing beams of extreme ultraviolet (XUV) radiation using the focal cone high harmonic generation (FCHHG) technique is examined for high energy lasers. The FCHHG geometry is created by passing a focusing laser beam through a gas sheet prior to reaching focus and thus creating a converging beam of high harmonic radiation. This leads to a larger interaction area that increases the total area of XUV emission while not exceeding the saturation intensity of the target atoms or increasing the density of the atoms. Such a method allows for scaling of HHG to any incident laser power. An experiment was conducted demonstrating such scaling to incident 400 TW pulses, showing both the expected spectral signature of HHG and the converging cone of XUV radiation. It was found that this technique is very sensitive to spatial non-uniformity in the driving laser, which has become more prevalent in high energy laser systems.

Study of Axonal Injury and Degeneration in Drosophila.

A fundamental feature of nervous systems is a highly specified synaptic connectivity between cells and the ability to adaptively change this connectivity through plasticity mechanisms. Plasticity mechanisms are highly relevant for responding to nervous system damage, and studies using nervous system injury paradigms in Drosophila (as well as other model organisms) have revealed conserved molecular pathways that are triggered by axon damage. Simple assays that introduce injuries to axons in either adult flies or larvae have proven to be particularly powerful for uncovering mechanisms of axonal degeneration and clearance. They have also been used to reveal requirements for regrowth of axons and dendrites, as well as signaling pathways that regulate cellular responses to nerve injury. Here we review commonly used and simple to carry out techniques that enable experimenters to study responses to axonal damage in either adult flies (following antennal transection) or larvae (following nerve crush to segmental nerves). Because axons and dendrites in the larval peripheral nervous system can be readily visualized through the translucent cuticle, another versatile method to probe injury responses is to focus high-energy laser light to a small and specific location in the animal. We therefore discuss a method for immobilizing intact larvae for imaging through the cuticle to carry out injury by pulse dye laser, which can be used to generate many different kinds of injuries and directed ablations within intact larvae. These techniques, combined with powerful genetic tools in Drosophila, make the fruit fly an excellent model system for studying the effects of injury and the mechanisms of axon degeneration, synapse plasticity, and immune response.

Laser ultrasonic frequency-domain imaging and phase weighted optimization based on full matrix capture

Far-field laser technology has greatly promoted the progress of nondestructive ultrasonic imaging of bulk structures. However, under thermoelastic excitation, the body waves exhibit a relatively low signal-to-noise ratio, resulting in images with low resolution and contrast. Based on the motivation, this paper developed a frequency-domain phase weighted imaging method to improve the quality of laser ultrasonic defect imaging. Firstly, laser ultrasonic scanning was performed on the sample with artificial transverse hole defects. The cylindrical lens focused line source was used to improve the intensity of the body wave signals, and ensure that there was no damage on the material surface under high laser energies. Then, the frequency-domain phase shift migration (PSM) algorithm was used to perform multimode imaging of defects, achieving frequency-domain synthetic aperture focusing technique (F-SAFT) and total focused method (F-TFM) imaging based on full matrix capture. Furthermore, the phase circular statistical vector (PCSV) was proposed for weighted optimization, which improved the image quality, suppressed the background noise and multimode artifacts. Finally, the imaging quality of several algorithms were discussed. The results indicate that frequency-domain images were superior to time-domain results. After phase weighting, the imaging quality can be further improved, and the detection blind zone was significantly reduced. This work will contribute to the rapid and high-quality defect imaging of laser ultrasonic.

Comparison of high and low pulse energy dusting protocols using holmium: YAG laser in flexible ureteroscopy for treatment of renal stones

ABSTRACT Objectives The management of renal stones, particularly those less than 2 cm in diameter, has changed with the development of endourological techniques, among which flexible ureteroscopy (FURS) using laser for lithotripsy has become a cornerstone. This study aims to compare the effectiveness of high pulse energy versus low pulse energy laser settings in renal stone dusting by Holmium YAG laser. Patients and Methods This prospective randomized study was conducted between September 2021 and November 2023 to compare the efficacy and safety of high energy versus low-energy pulse settings using a Holmium: YAG laser dusting of renal stones less than 2 cm in diameter. A total of 174 adult patients were included, divided equally into high- and low-pulse energy groups, based on the energy settings of the laser high energy (ranged from 1.2–2.5 Joules and frequency of 8 hz) and low energy (less than 0.5 Joules and frequency ≥ 15 hz) using the dusting ‎technique with non-touch non-stop approach. The study sought to evaluate the impact of these settings on stone fragmentation efficiency, operative time, laser energy consumption, and postoperative outcomes, including stone-free rates and complications. Results The study involved 174 patients who underwent renal stone lithotripsy and showed that using high pulse energy laser dusting settings significantly reduced operative times and more rapid dusting compared to low pulse energy settings, without affecting the stone-free rate. The study observed no significant differences in stone size or location between both groups. Minor postoperative complications were similar between both groups, indicating high pulse energy settings for lithotripsy dusting. Conclusion The efficacy of high pulse energy dusting in enhancing stone removal during surgery, potentially reducing operative time. Further validation through larger-scale studies is needed to solidify these findings. This technique presents a promising solution, particularly in regions with limited resources where acquiring expensive laser equipment is challenging.

Development of broadband high efficiency Mid-IR gratings for high-energy ultrafast lasers

Development of broadband high efficiency Mid-IR gratings for high-energy ultrafast lasers

Bubble dynamics and atomization of acoustically levitated diesel and biodiesel droplets using femtosecond laser pulses

This study focuses on the bubble dynamics and associated breakup of individual droplets of diesel and biodiesel under the influence of femtosecond laser pulses. The bubble dynamics were examined by suspending the droplets in the air through an acoustically levitated setup. The laser pulse energies ranged from 25 to 1050 µJ, and droplet diameters varied between 0.25 and 1.5 mm. High-speed shadowgraphy was employed to examine the influence of femtosecond laser intensity and multiple laser pulses on various spatial–temporal parameters. Four distinct sequences of regimes have been identified, depending on early and late times: bubble creation by individual laser pulses, coalescence, bubble rupture and expansion, and droplet fragmentation. At all laser intensities, early-time dynamics showed only bubble generation, while specifically at higher intensities, late-time dynamics revealed droplet breaking. The droplet breakup is further categorized into three mechanisms: steady sheet collapse, unstable sheet breakup, and catastrophic breakup, all following a well-known ligament and secondary breakup process. The study reveals that laser pulses with high repetition rates and moderate laser energy were the optimal choice for precise bubble control and cutting.

Surface quality and mechanical property evolution of laser nitrided Zr-based metallic glass induced by laser shock flattening

Laser nitriding is an effective modification technique to improve the comprehensive mechanical properties of metallic glasses (MGs). However, numerous micro-defects, such as pores and humps, usually appear on the laser-nitriding-treated (LNed) MG surface, and therefore additional post-treatment is required. Herein, laser shock processing was implemented to flatten the LNed MG and as well modify its surface mechanical property. The dependence of the laser shock flattening process on the laser energy density was investigated. The results revealed that the surface micro-defects on the LNed MG were significantly reduced after laser shock flattening, and accordingly, the surface roughness (Sa) was decreased, with a maximum reduction of 61.87% (from 0.48 to 0.183 μm) achieved at a relatively high laser energy density of 178.3 J/cm2. Furthermore, nanoindentation measurements indicated that although the surface hardness of the LNed MG was decreased after laser shock flattening, it was still higher than that of the as-cast MG.

Directed high-energy infrared laser beams for photovoltaic generation of electric power at remote locations

Transferring energy without transferring mass is a powerful paradigm to address the challenges faced when the access to, or the deployment of, the infrastructure for energy conversion is locally impossible or impractical. Laser beaming holds the promise of effectively implementing this paradigm. With this perspective, this work evaluates the optical-to-electrical power conversion that is created when a collimated laser beam illuminates a silicon photovoltaic solar cell that is located kilometers away from the laser. The laser is a CW high-energy Yb-doped fiber laser emitting at a center wavelength of 1075 nm with ∼1 m2 of effective beam area. For 20 kW illumination of a solar panel having 0.6 m2 of area, optical simulations and thermal simulations indicate an electrical output power of 3000 W at a panel temperature of 550 K. Our investigations show that thermo-radiative cells are rather inefficient. In contrast, an optimized approach to harvest laser energy is achieved by using a hybrid module consisting of a photovoltaic cell and a thermoelectric generator. Finally, practical considerations related to infrared power beaming are discussed and its potential applications are outlined.

Characteristic and mechanism of pollution by laser cleaning high-value vehicle parts with a complex structure in remanufacturing industry

Remanufacturing high-value vehicle parts is of substantial significance for the circular economy because it provides a second service life and reduces solid waste generation. Laser cleaning is a promising method in the remanufacturing industry owing to its high energy, precision, and efficiency. However, the pollution caused by laser cleaning remains unknown and has rarely been reported, limiting the application of this method. In this study, pollution removal and conversion using a high-energy laser were explored, and environmental life cycle and health risk assessments were conducted. The results showed that high-energy lasers might induce new organic pollutants, such as olefins, alkynes, and aldehydes. During laser cleaning, thermal elastic expansion and shock wave generation were the main mechanisms of rust removal, and evaporation and small-scope boiling were used for waste oil removal. The mean concentration of PM10 was above 7000 µg/m3 in laser rust removal, and the total concentration of volatile organic compounds (VOCs) was the highest in laser oil removal (∼ 2568 µg/m3). Particulate matter contained high amounts of Fe, Al, and Mn. An environmental life cycle assessment indicated that laser cleaning for stain removal significantly reduced the total environmental impact compared with that of traditional solvent-ultrasonic cleaning (∼ 40.0%) and sandblasting (∼ 83.3%). This study provides an environmental protection basis for increasing the use of laser cleaning in the remanufacturing industry.

Extending the mechanical property regime of laser powder bed fusion Sc- and Zr-modified Al6061 alloy by manipulating process parameters and heat treatment

Highly dense compositionally modified Al6061 alloys with Sc and Zr (Al6061MOD) were fabricated using the laser powder bed fusion. The as-built AL6061MOD alloy exhibits a bimodal grain size distribution consisting of coarse columnar grains and ultrafine grains, which is tunable by either varying the printing parameters or post-heat treatment. A high laser energy density along with a lower cooling rate, leaving more time for nucleating primary Al3Sc particles, triggers a higher area fraction of ultrafine grains. The heat treatment-induced evolution of microstructure and mechanical properties is jointly influenced by the size of grains and (Al,Si)3(Sc,Zr) particles. The conventional T6 heat treatment triggers coarsening of grains (∼5.3 μm) and (Al,Si)3(Sc,Zr) particles (∼42 nm), lowering the yield strength (∼280 MPa) compared with that of as-built counterparts. On the contrary, direct aging enhances the yield strength (∼383 MPa) due to the precipitation of nano-sized secondary Al3(Sc,Zr) particles (∼5 nm) as well as retaining the grain size (∼690 nm) of ultrafine grains. Concurrent with the tunable strength, the plasticity behaviors (Lüders band and Portevin-Le Chatelier effect) are manipulated correspondingly with varying microstructure. The broad tailoring of microstructure and mechanical property regime can shed light on designing Al alloys targeting the desired applications by manipulating the printing parameters and heat treatment.

High-Energy Laser Facility PHELIX at GSI: Latest Advances and Extended Capabilities

High-Energy Laser Facility PHELIX at GSI: Latest Advances and Extended Capabilities