High Bite Forces Research Articles

Dietary Adaptations of the Feeding Apparatus in Bats

Diet evolution is considered a major driver of morphological differences and species diversification in mammals, but quantitative tests of morphological adaptation and diversification are scarce. Bats are an ideal system to investigate dietary adaptations; they represent 20% of all mammals, encompass nearly the full spectrum of mammal diets, and have highly diverse cranial morphologies and feeding behaviors. Here, we present research aimed at identifying whether and how the bat feeding apparatus has diversified in conjunction with diet evolution. We combine modern laboratory and field approaches to quantify and map the evolution of skull shape, muscle morphology, and feeding performance across major bat lineages. These methods include: Computed Tomography (CT) scanning and Diffusible Iodine Contrast Enhanced CT scanning, three‐dimensional biomechanical modeling, in vivo bite force measurements, and statistical tests of evolutionary adaptive regimes. With these detailed anatomical and performance datasets, we have been able to identify potential drivers and mechanisms of morphological and functional diversification of the bat feeding apparatus. Analyses of selective regimes indicate that the current diversity of bat skull shapes is best explained by adaptive evolution for both dietary and sensory demands, with striking differences among bats that use different forms of echolocation, or none at all, and among diet specialists. Species that specialize on different diets differ in skull size and shape and in the morphology of their jaw muscles, including physiological cross‐sectional areas, origin and insertion areas, and fiber architecture. Importantly, our biomechanical models indicate that these morphological differences translate into differences in feeding performance metrics that are relevant to food processing, including maximum bite force and gape. For example, for their size, species with a foreshortened rostrum and large temporalis muscles are able to generate high bite forces at the expense of a wide gape, and this allows them to consume tough but relatively small food items. Altogether, these results illuminate the potential drivers and mechanisms of morphological and ecological diversification in bats, and possibly other mammals.Support or Funding InformationNational Science Foundation award 1557125This abstract is from the Experimental Biology 2018 Meeting. There is no full text article associated with this abstract published in The FASEB Journal.

The Baddest Bite

The article focuses on the crocodiles' evolutionary success. It the rich fossil record of crocodilians, which shows no change in the shape of the body behind the head for millions of years while the body size has shifted again and again. It refers to a finding by experts that lower bite forces are associated with species with delicate snouts while those with stouter ones would have higher bite forces.

Skull Size and Biomechanics are Good Estimators of In Vivo Bite Force in Murid Rodents.

Rodentia is a species-rich group with diversified modes of life and diets. Although rodent skull morphology has been the focus of a voluminous literature, the functional significance of its variations has yet to be explored in live animals. Myomorphous rodents, including murids, have been suggested to represent "high-performance generalists." We measured in vivo bite force in 14 species of wild and lab-reared murid rodents of various sizes and diets to investigate potential morphofunctional differences between them. We dissected their skulls and computed a biomechanical model to estimate bite force. We first tested if our model allowed good estimation of in vivo data. Then, using morphological, in vivo and estimated bite force data in a phylogenetic context, we aimed to find the drivers of bite force differences among species. Estimated and in vivo bite forces were strongly correlated, which indicates that (a) biomechanical models allow a good estimation of real performance, and that (b) size and muscular changes (increased mass, fiber length, and PCSA) are the main drivers of bite performance differences. Myomorphous rodents, therefore, may have evolved high bite force through a combination of changes in size and musculature, which gave them a great versatility in their ability to process food. We found mixed results at the intraspecific level, with only some species displaying a good fit between estimated and in vivo measurements. We suggest that limited variation in size and muscular organization, and increased behavioral variation might decrease the precision of bite force estimates within species. Anat Rec, 301:256-266, 2018. © 2018 Wiley Periodicals, Inc.

Sexual dimorphism, bite force and diet in the diamondback terrapin

AbstractSexual dimorphism in head size and shape has been documented in many animals and is often thought to be related to the consumption of different prey in males and females thus reducing competition between the two sexes. However, for this to be true, the difference in head size and shape should be associated with a difference in performance allowing one sex to exploit different prey resources. In many durophagous turtle species, females are bigger than males and have bigger heads for a given size. Here, we test whether the observed dimorphism in head size and shape in the durophagous Malaclemys terrapin is reflected in differences in bite force. Furthermore, we measure the forces needed to crush different prey items in order to evaluate whether the observed bite force dimorphism allows access to different dietary resources in females. Finally, we compare head size and shape and bite force between the durophagous M. terrapin and a generalist (Trachemys scripta). Our results show that females of M. terrapin have higher bite forces than males in line with their bigger heads relative to their body size. Moreover, the higher bite forces in females allow them to eat larger as well as different types of snails resulting in differences in diet. Finally, our results show that both sexes of M. terrapin have bigger heads and bite forces for their body size compared to the generalist T. scripta, even as juveniles. Moreover, M. terrapin bite harder even when taking into account differences in head size, suggesting intrinsic differences in the jaw musculature in durophagous species.

Skeleton of an unusual, cat-sized marsupial relative (Metatheria: Marsupialiformes) from the middle Eocene (Lutetian: 44-43 million years ago) of Turkey.

We describe a near-complete, three-dimensionally preserved skeleton of a metatherian (relative of modern marsupials) from the middle Eocene (Lutetian: 44–43 million years ago) Lülük member of the Uzunçarşıdere Formation, central Turkey. With an estimated body mass of 3–4 kg, about the size of a domestic cat (Felis catus) or spotted quoll (Dasyurus maculatus), it is an order of magnitude larger than the largest fossil metatherians previously known from the Cenozoic of the northern hemisphere. This new taxon is characterised by large, broad third premolars that probably represent adaptations for hard object feeding (durophagy), and its craniodental morphology suggests the capacity to generate high bite forces. Qualitative and quantitative functional analyses of its postcranial skeleton indicate that it was probably scansorial and relatively agile, perhaps broadly similar in locomotor mode to the spotted quoll, but with a greater capacity for climbing and grasping. Bayesian phylogenetic analysis of a total evidence dataset comprising 259 morphological characters and 9kb of DNA sequence data from five nuclear protein-coding genes, using both undated and “tip-and-node dating” approaches, place the new taxon outside the marsupial crown-clade, but within the clade Marsupialiformes. It demonstrates that at least one metatherian lineage evolved to occupy the small-medium, meso- or hypo-carnivore niche in the northern hemisphere during the early Cenozoic, at a time when there were numerous eutherians (placentals and their fossil relatives) filling similar niches. However, the known mammal fauna from Uzunçarşıdere Formation appears highly endemic, and geological evidence suggests that this region of Turkey was an island for at least part of the early Cenozoic, and so the new taxon may have evolved in isolation from potential eutherian competitors. Nevertheless, the new taxon reveals previously unsuspected ecomorphological disparity among northern hemisphere metatherians during the first half of the Cenozoic.

Do differences in skull morphology and bite performance explain dietary specialization in sea otters?

Intraspecific studies of morphology and performance are essential for understanding the factors that enable resource partitioning within ecological communities. The sea otter (Enhydra lutris) is one of the few mammal species in which individual-level dietary specialization has been documented, making them an ideal system to investigate the morphological basis of food resource partitioning. Here, we test if differences in food resource use within and between sea otter subspecies can be explained by differences in ecologically relevant metrics of bite performance that are mainly the product of variation in size, cranial morphology, or a combination of these traits. We use geometric morphometrics to evaluate variation in cranium size and morphology, and 2-dimensional models to estimate bite performance differences between 2 sea otter subspecies that differ in dietary ecology: the northern sea otter (Enhydra lutris kenyoni, a facultative generalist) and the southern sea otter (E. l. nereis, a specialist). We found significant differences in cranium shape and size between subspecies and between male and female sea otters. These differences were subtle yet consistent with most subspecies classifications and known sexually dimorphic traits. Cranial morphological differences did not translate into differences in estimated bite force between subspecies or sexes, but dentary strength differed significantly between male and female sea otters. Sea otters have short, blunt crania with pronounced sagittal and lambdoidal crests, and strong mandibles. These traits combine to produce high bite forces for their size. We propose that high bite performance capacity in sea otters enables resource-use variation by widening the diversity of available food resources they can procure from their environment; this allows them to behave as either generalists or specialists within different habitats.

Centronuclear myopathy: clinical characteristics and MRI image features of oral and maxillofacial region

Objective: To provide biomechnical basis for orthodontics of centronuclear myopathy (CNM) patients, we studied the oral and maxillofacial clinical features and MRI image manifestations to explore application of MRI to objective evaluation the affected facial muscles. Methods: The study consisted of 8 patients who were diagnosed as CNM (CNM group) and 20 healthy volunteers (control group). Their medical information were gathered and then we examined the ptosis situation and the facial index calculation of them. To measure the maximal hight of palate and the width of palate, patients and volunteers were made impressions. We also checked their maximum bite force with occlusion pressure tester. And they took lateral cephalometric radiographs to measure mandibular plane-Frankfort horizontal plane angle (MP-FH). At last, they were taken oral and maxillofacial region MRI to observe the affected situation of masseter muscle, medial pterygoid muscle and lateral pterygoid muscle. Results: Six patients were ptosis; 6 patients had inverse V-shaped mouth; 3 patients were difficulty in swallowing; 4 patients were anterior open bites; 4 patients were mouth breathing; 7 patients liked to eat soft foods. Morphological facial index ([91.3±0.5]%), MP-FH (34.9°±2.0°) of CNM group were greater than the control group, male maximal hight of palate ([19.0±0.2] mm), female maximal hight of palate ([18.0±0.6] mm) of CNM group were greater than the control group (P<0.05). Male width of palate ([34.5±0.8] mm), female width of palate ([33.4±1.0] mm), male maximum bite force ([464.3±78.2] N), female maximum bite force ([320.7±13.8] N), maximal opening of mouth ([3.4±0.3] cm) of CNM group were less than the control group (P<0.05). And these had significant difference compared with the control group (P<0.05). In MRI examination, there were 7 patients' masseter muscles, 4 patients' medial pterygoid muscles and 6 patients' lateral pterygoid muscles to atrophy asymmetrically. These three pieces of muscular fatty infiltration were inordinately, focused on Grade 0 to 4 and the both sides were similar. Conclusions: CNM patients with long and thin face, high palatine arches and low bite force together were the biomechanical basis of the maxillofacial deformities. MRI can clearly show the affected masseter muscle, medial pterygoid muscle, lateral pterygoid muscle, and can serve as an objective examination method for the evaluation of facial muscles. It can be worth of clinical popularization and application.

Masticatory muscle architecture in a water-rat from Australasia (Murinae, Hydromys) and its implication for the evolution of carnivory in rodents.

Murines are well known for their generalist diet, but several of them display specializations towards a carnivorous diet such as the amphibious Indo-Pacific water-rats. Despite the fact that carnivory evolved repeatedly in this group, few studies have investigated associated changes in jaw muscle anatomy and biomechanics. Here, we describe the jaw muscles and cranial anatomy of a carnivorous water-rat, Hydromys chrysogaster. The architecture of the jaw musculature of six specimens captured both on Obi and Papua were studied and described using dissections. We identified the origin and insertions of the jaw muscles, and quantified muscle mass, fiber length, physiological cross-sectional area, and muscle vectors for each muscle. Using a biomechanical model, we estimated maximum incisor and molar bite force at different gape angles. Finally, we conducted a 2D geometric morphometric analyses to compare jaw shape, mechanical potential, and diversity in lever-arm ratios for a set of 238 specimens, representative of Australo-Papuan carnivorous and omnivorous murids. Our study reveals major changes in the muscle proportions among Hydromys and its omnivorous close relative, Melomys. Hydromys was found to have large superficial masseter and temporalis muscles as well as a reduced deep masseter and zygomatico-mandibularis, highlighting major functional divergence among omnivorous and carnivorous murines. Changes in these muscles are also accompanied by changes in jaw shape and the lines of action of the muscles. A more vertically oriented masseter, reduced masseteric muscles, as well as an elongated jaw with proodont lower incisors are key features indicative of a reduced propalinality in carnivorous Hydromys. Differences in the fiber length of the masseteric muscles were also detected between Hydromys and Melomys, which highlight potential adaptations to a wide gape in Hydromys, allowing it to prey on larger animals. Using a biomechanical model, we inferred a greater bite force in Hydromys than in Melomys, implying a functional shift between omnivory and carnivory. However, Melomys has an unexpected greater bite force at large gape compared with Hydromys. Compared with omnivorous Melomys, Hydromys have a very distinctive low mandible with a well-developed coronoid process, and a reduced angular process that projects posteriorly to the ascending rami. This jaw shape, along with our mechanical potential and jaw lever ratio estimates, suggests that Hydromys has a faster jaw closing at the incisor, with a higher bite force at the level of the molars. The narrowing of the Hydromys jaw explains this higher lever advantage at the molars, which constitutes a good compromise between a wide gape, a reduced anterior masseteric mass, and long fiber lengths. Lever arms of the superficial and deep masseter are less favourable to force output of the mandible in Hydromys but more favourable to speed. Compared with the small input lever arm defined between the condyle and the angular process, the relatively longer mandible of Hydromys increases the speed at the expense of the output force. This unique combination of morphological features of the masticatory apparatus possibly has permitted Hydromys to become a highly successful amphibious predator in the Indo-Pacific region.

Bite force and dental implant treatment: a short review.

Dental implants are placed endosseously, and the bone is the ultimate bearer of the occlusal load. Patients are not uniform in the maximum bite force they can generate. The occlusal biting load in the posterior jaw is usually about three times of that found in the anterior. It is possible for supporting implants to be overloaded by the patients’ biting force, resulting in bone loss and failure of the fixture. Bite force measurement may be an important parameter when planning dental implant treatment. Some patients can generate extreme biting loads that may cause a luxation of the fixture and subsequent loss of osseointegration. A patient with low biting force may be able to have a successful long-term outcome even with poor anatomical bone qualities. Patients with a high bite force capability may have an increased risk for late component fracture or implant failure. There is no correlation of any bite force value that would indicate any overload of a given implant in a given osseous site. Nonetheless, after bite force measurement, a qualitative judgement may be made by the clinician for the selection of an implant diameter and length and prosthetic design.

The impact of gape on the performance of the skull in chisel-tooth digging and scratch digging mole-rats (Rodentia: Bathyergidae).

The African mole-rats (Bathyergidae) are a family of rodents highly adapted for life underground. Previous research has shown that chisel-tooth digging mole-rats (which use their incisors to dig burrows) are clearly distinguishable from scratch diggers (which only use the forelimbs to tunnel) on the basis of morphology of the skull, and that the differences are linked to the production of high bite forces and wide gapes. We hypothesized that the skull of a chisel-tooth digging mole-rat would perform better at wider gapes than that of a scratch digging mole-rat during incisor biting. To test this hypothesis, we created finite-element models of the cranium of the scratch digging Bathyergus suillus and the chisel-tooth digging Fukomys mechowii, and loaded them to simulate incisor bites at different gapes. Muscle loads were scaled such that the ratio of force to surface area was the same in both models. We measured three performance variables: overall stress across the cranium, mechanical efficiency of biting and degree of deformation across the skull. The Fukomys model had a more efficient incisor bite at all gapes, despite having greater average stress across the skull. In addition, the Fukomys model deformed less at wider gapes, whereas the Bathyergus model deformed less at narrower gapes. These properties of the cranial morphology of Fukomys and Bathyergus are congruent with their respective chisel-tooth and scratch digging behaviours and, all other factors being equal, would enable the more efficient production of bite force at wider gapes in Fukomys. However, in vivo measurements of muscle forces and activation patterns are needed to fully understand the complex biomechanics of tooth digging.

Musculoskeletal modelling under an evolutionary perspective: deciphering the role of single muscle regions in closely related insects.

Insects show a remarkable diversity of muscle configurations, yet the factors leading to this functional diversity are poorly understood. Here, we use musculoskeletal modelling to understand the spatio-temporal activity of an insect muscle in several dragonfly species and to reveal potential mechanical factors leading to a particular muscle configuration. Bite characteristics potentially show systematic signal, but absolute bite force is not correlated with size. Muscle configuration and inverse dynamics show that the wider relative area of muscle attachment and the higher activity of subapical muscle groups are responsible for this high bite force. This wider attachment area is, however, not an evolutionary trend within dragonflies. Our inverse dynamic data, furthermore, show that maximum bite forces most probably do not reflect maximal muscle force production capability in all studied species. The thin head capsule and the attachment areas of muscles most probably limit the maximum force output of the mandibular muscles.

The impact of digging on craniodental morphology and integration.

The relationship between the form and function of the skull has been the subject of a great deal of research, much of which has concentrated on the impact of feeding on skull shape. However, there are a number of other behaviours that can influence craniodental morphology. Previous work has shown that subterranean rodents that use their incisors to dig (chisel-tooth digging) have a constrained cranial shape, which is probably driven by a necessity to create high bite forces at wide gapes. Chisel-tooth-digging rodents also have an upper incisor root that is displaced further back into the cranium compared with other rodents. This study quantified cranial shape and upper incisors of a phylogenetically diverse sample of rodents to determine if chisel-tooth-digging rodents differ in craniodental morphology. The study showed that the crania of chisel-tooth-digging rodents shared a similar place in morphospace, but a strong phylogenetic signal within the sample meant that this grouping was nonsignificant. It was also found that the curvature of the upper incisor in chisel-tooth diggers was significantly larger than in other rodents. Interestingly, most subterranean rodents in the sample (both chisel-tooth and scratch diggers) had upper incisors that were better able to resist bending than those of terrestrial rodents, presumably due to their similar diets of tough plant materials. Finally, the incisor variables and cranial shape were not found to covary consistently in this sample, highlighting the complex relationship between a species' evolutionary history and functional morphology.

On the evolutionary advantage of multi-cusped teeth.

A hallmark of mammalian evolution is a progressive complexity in postcanine tooth morphology. However, the driving force for this complexity remains unclear: whether to expand the versatility in diet source, or to bolster tooth structural integrity. In this study, we take a quantitative approach to this question by examining the roles of number, position and height of multiple cusps in determining sustainable bite forces. Our approach is to use an extended finite-element methodology with due provision for step-by-step growth of an embedded crack to determine how fracture progresses with increasing occlusal load. We argue that multi-cusp postcanine teeth are well configured to withstand high bite forces provided that multiple cusps are contacted simultaneously to share the load. However, contact on a single near-wall cusp diminishes the strength. Location of the load points and cusp height, rather than cusp number or radius, are principal governing factors. Given these findings, we conclude that while complex tooth structures can enhance durability, increases in cusp number are more likely to be driven by the demands of food manipulation. Structural integrity of complex teeth is maintained when individual cusps remain sufficiently distant from the side walls and do not become excessively tall relative to tooth width.

Diet, bite force and skull morphology in the generalist rodent morphotype.

For many vertebrate species, bite force plays an important functional role. Ecological characteristics of a species' niche, such as diet, are often associated with bite force. Previous evidence suggests a biomechanical trade-off between rodents specialized for gnawing, which feed mainly on seeds, and those specialized for chewing, which feed mainly on green vegetation. We tested the hypothesis that gnawers are stronger biters than chewers. We estimated bite force and measured skull and mandible shape and size in 63 genera of a major rodent radiation (the myomorph sigmodontines). Analysis of the influence of diet on bite force and morphology was made in a comparative framework. We then used phylogenetic path analysis to uncover the most probable causal relationships linking diet and bite force. Both granivores (gnawers) and herbivores (chewers) have a similar high bite force, leading us to reject the initial hypothesis. Path analysis reveals that bite force is more likely influenced by diet than the reverse causality. The absence of a trade-off between herbivores and granivores may be associated with the generalist nature of the myomorph condition seen in sigmodontine rodents. Both gnawing and chewing sigmodontines exhibit similar, intermediate phenotypes, at least compared to extreme gnawers (squirrels) and chewers (chinchillas). Only insectivorous rodents appear to be moving towards a different direction in the shape space, through some notable changes in morphology. In terms of diet, natural selection alters bite force through changes in size and shape, indicating that organisms adjust their bite force in tandem with changes in food items.

Human feeding biomechanics: performance, variation, and functional constraints.

The evolution of the modern human (Homo sapiens) cranium is characterized by a reduction in the size of the feeding system, including reductions in the size of the facial skeleton, postcanine teeth, and the muscles involved in biting and chewing. The conventional view hypothesizes that gracilization of the human feeding system is related to a shift toward eating foods that were less mechanically challenging to consume and/or foods that were processed using tools before being ingested. This hypothesis predicts that human feeding systems should not be well-configured to produce forceful bites and that the cranium should be structurally weak. An alternate hypothesis, based on the observation that humans have mechanically efficient jaw adductors, states that the modern human face is adapted to generate and withstand high biting forces. We used finite element analysis (FEA) to test two opposing mechanical hypotheses: that compared to our closest living relative, chimpanzees (Pan troglodytes), the modern human craniofacial skeleton is (1) less well configured, or (2) better configured to generate and withstand high magnitude bite forces. We considered intraspecific variation in our examination of human feeding biomechanics by examining a sample of geographically diverse crania that differed notably in shape. We found that our biomechanical models of human crania had broadly similar mechanical behavior despite their shape variation and were, on average, less structurally stiff than the crania of chimpanzees during unilateral biting when loaded with physiologically-scaled muscle loads. Our results also show that modern humans are efficient producers of bite force, consistent with previous analyses. However, highly tensile reaction forces were generated at the working (biting) side jaw joint during unilateral molar bites in which the chewing muscles were recruited with bilateral symmetry. In life, such a configuration would have increased the risk of joint dislocation and constrained the maximum recruitment levels of the masticatory muscles on the balancing (non-biting) side of the head. Our results do not necessarily conflict with the hypothesis that anterior tooth (incisors, canines, premolars) biting could have been selectively important in humans, although the reduced size of the premolars in humans has been shown to increase the risk of tooth crown fracture. We interpret our results to suggest that human craniofacial evolution was probably not driven by selection for high magnitude unilateral biting, and that increased masticatory muscle efficiency in humans is likely to be a secondary byproduct of selection for some function unrelated to forceful biting behaviors. These results are consistent with the hypothesis that a shift to softer foods and/or the innovation of pre-oral food processing techniques relaxed selective pressures maintaining craniofacial features that favor forceful biting and chewing behaviors, leading to the characteristically small and gracile faces of modern humans.

Relação da espessura e da atividade elétrica do músculo masseter com a força de mordida: um estudo morfológico e eletrofisiológico

RESUMO: Objetivo: estudar a relação da espessura e da atividade elétrica do músculo masseter com a força de mordida. Métodos: participaram do estudo 17 adultos jovens (21,3 ( 1,4 anos), sendo 7 do gênero feminino e 10 do gênero masculino, saudáveis e clinicamente assintomáticos, quanto a disfunções temporomandibulares. Foi efetuada a medida da espessura do músculo masseter unilateralmente, durante o repouso e contração voluntária máxima. Também foi quantificada a força de mordida para cada lado com um transdutor de força posicionado na região do primeiro molar e simultaneamente avaliou-se atividade elétrica do masseter durante a mordida unilateral. A análise foi baseada na comparação das amostras, sendo utilizados o test t, Wilcoxon, Mann-Whitney e regressão linear multivariada. Resultado: a espessura do músculo masseter foi maior nos homens, tanto no repouso quanto em contração. Observou-se uma simetria entre os lados com os músculos em repouso e em contração. A frequência mediana do sinal eletromiográfico, para o músculo masseter em contração voluntária máxima, não apresentou diferença estatisticamente significante intra-indivíduos e na comparação entre os gêneros. Foi encontrada maior força de mordida nos indivíduos do gênero masculino. Não foi encontrado um modelo de regressão linear multivariada entre as variáveis estudadas. Conclusão: neste estudo, não foi possível encontrar um modelo linear com as variáveis estudadas.

Go big or go fish: morphological specializations in carnivorous bats.

Specialized carnivory is relatively uncommon across mammals, and bats constitute one of the few groups in which this diet has evolved multiple times. While size and morphological adaptations for carnivory have been identified in other taxa, it is unclear what phenotypic traits characterize the relatively recent evolution of carnivory in bats. To address this gap, we apply geometric morphometric and phylogenetic comparative analyses to elucidate which characters are associated with ecological divergence of carnivorous bats from insectivorous ancestors, and if there is morphological convergence among independent origins of carnivory within bats, and with other carnivorous mammals. We find that carnivorous bats are larger and converged to occupy a subset of the insectivorous morphospace, characterized by skull shapes that enhance bite force at relatively wide gapes. Piscivorous bats are morphologically distinct, with cranial shapes that enable high bite force at narrow gapes, which is necessary for processing fish prey. All animal-eating species exhibit positive allometry in rostrum elongation with respect to skull size, which could allow larger bats to take relatively larger prey. The skull shapes of carnivorous bats share similarities with generalized carnivorans, but tend to be more suited for increased bite force production at the expense of gape, when compared with specialized carnivorans.

Assessment of the differences in masticatory behavior between male and female adolescents

Chewing behavior may show sex differences; thus, the present study aimed to compare the masticatory aspects and the prediction of masticatory performance between male and female adolescents. Ninety-one healthy subjects (47 girls, 44 boys), caries-free and aged 14–17years, were included. Masticatory performance and maximal bite force were evaluated using a color-changeable chewing gum and digital gnathodynamometer, respectively. Masticatory behavior was assessed by the subjective aspect of the quality of the masticatory function (validated questionnaire) and the Orofacial Myofunctional Evaluation with Scores expanded (OMES-e) was used to determine chewing time, frequency of chewing cycles and other aspects. Salivary flow rate was also assessed. The physical examination involved measurements of facial morphometry, body weight, height, skeletal muscle mass, and dental/occlusal evaluations. It was observed that boys showed larger facial dimensions, higher bite force and chewing frequency and better masticatory performance than girls. They also showed shorter chewing time, fewer chewing cycles and lower score for OMES-e (that is, more changes in orofacial myofunctional aspects). Bite force showed a weak correlation with skeletal muscle mass only in boys (r=0.3035; p=0.0451). The masticatory performance was dependent on the bite force in boys (Adj R2=19.2%; Power=84.1%); among girls, masticatory performance was dependent on the frequency of chewing cycles and masticatory behavior (subjective aspect) (Adj R2=34.1%; Power=96.1%). The findings support the existence of sex differences in many masticatory aspects of function and behavior, hence the importance of considering sex differences when evaluating masticatory function and myofunctional therapy outcomes among young subjects.

Cranial biomechanics, bite force and function of the endocranial sinuses in Diprotodon optatum, the largest known marsupial

The giant extinct marsupial Diprotodon optatum has unusual skull morphology for an animal of its size, consisting of very thin bone and large cranial sinuses that occupy most of the internal cranial space. The function of these sinuses is unknown as there are no living marsupial analogues. The finite element method was applied to identify areas of high and low stress, and estimate the bite force of Diprotodon to test hypotheses on the function of the extensive cranial sinuses. Detailed three-dimensional models of the cranium, mandible and jaw adductor muscles were produced. In addition, manipulations to the Diprotodon cranial model were performed to investigate changes in skull and sinus structure, including a model with no sinuses (sinuses 'filled' with bone) and a model with a midsagittal crest. Results indicate that the cranial sinuses in Diprotodon significantly lighten the skull while still providing structural support, a high bite force and low stress, indicating the cranium may have been able to withstand higher loads than those generated during feeding. Data from this study support the hypothesis that pneumatisation is driven by biomechanical loads and occurs in areas of low stress. The presence of sinuses is likely to be a byproduct of the separation of the outer surface of the skull from the braincase due to the demands of soft tissue including the brain and the large jaw adductor musculature, especially the temporalis. In very large species, such as Diprotodon, this separation is more pronounced, resulting in extensive cranial sinuses due to a relatively small brain compared with the size of the skull.

Functional benefits of implants placed during ablative surgery: A 5-year prospective study on the prosthodontic rehabilitation of 56 edentulous oral cancer patients.

The timing of placement as well as the functional benefit of interforaminal implants in edentulous patients treated for oral cancer is unclear. Fifty-six patients were recruited at 2 institutions. In 1 institution, interforaminal implants were placed during ablative surgery, the other institution used conventional prosthodontics with optional placement of implants postsurgery (postponed-placement). Masticatory performance, bite force, and subjective masticatory function were assessed before and 6 months, 1 year, and 5 years after surgery. Implant-retained overdentures (IODs) demonstrated the highest bite force and the least problems with solid food and food choice. Masticatory performance was equal for IODs and conventional dentures. After 5 years, IODs from patients in the during-ablative-surgery cohort tend to have higher bite force and masticatory performance than those from patients in the postponed-placement cohort. IODs produce the highest overall masticatory function. Implant placement during ablative surgery seems to be functionally beneficial. © 2016 Wiley Periodicals, Inc. Head Neck 38: E2103-E2111, 2016.