Heterostructure Electrocatalyst Research Articles

Functional Ni/MnO2 heterostructure electrocatalysts based on self-sacrifice-induced LDHs anchored on nanofibers for microbial fuel cells

Designing cost-effective, highly active oxygen reduction catalysts for high-power-density microbial fuel cells (MFCs) is a significant challenge. To address this, this study uniformly dispersed layered double hydroxides (LDHs) on nanofiber surfaces, and subsequently utilized the self-sacrifice method of zeolite imidazole frameworks (ZIFs) to synthesize LDH/ZIF@CNFs bimetallic heterostructure with precise lattice matching. Experimental results collectively verified that LDH/ZIF@CNFs-12 exhibits an onset potential of -0.087 V, surpassing Pt/C (-0.098 V). Impressively, MFC equipped with LDH/ZIF@CNFs-12 achieves a high power density of 939.05 mW/cm2, surpassing Pt/C (859.74 mW/cm2). The excellent electrocatalytic performance of this catalyst originates from the rich active sites exposed in the LDHs core during the MOFs-assisted synthesis process, and the synergistic catalysis achieved by the formation of heterojunctions. In addition, 3D nanofibers uniformly disperse active sites and reduce large band gaps. This work unveils a new perspective for cost-effective, eco-friendly, and sustainable catalysts suitable for MFCs.

Highly efficient nanosized MoS2/MoP heterocatalyst for enhancing hydrogen evolution reaction over a wide pH range

Energy consumption associated with the catalysts contributes partly to the high ohmic resistance arising from the low conductivity of the catalyst and poor charge transfer between nanoparticles, which has been difficult to study due to the complicated nanostructured framework of the catalysts. We constructed a novel heterostructure electrocatalyst (MoS2/MoP@NC) composed of nanosized MoS2/MoP heterostructures anchoring on hierarchical N-doped carbon for smoothing electron transfer in boosting hydrogen evolution reaction (HER). With the merits of large surface area, rapid charge transfer, and optimized electronic structure induced by charge transfer across the sufficient interface, the optimal MoS2/MoP@NC (MoSP) catalyst shows a competitive overpotential of 140 (0.5 M H2SO4), 76 (1.0 M KOH), and 103 mV (0.5 M NaCl &1.0 M KOH) at 10 mA cm−2, respectively. Raman experiment and Density functional theory (DFT) calculations reveal the formation of Mo-S-Mo bonds between MoS2 and MoP, which favor enhancing the Femi level to facilitate the electron transfer, therefore regulating the electronic structure for the optimization of adsorption energy of hydrogen intermediate. Based on the experimental results, we constructed an energy consumption model of catalysts, where energy consumption comes from three aspects. The heterostructure design decreases the energy consumption of the catalysts greatly compared to the single-phase Mo-based catalyst of MoS2 (78.0%) and MoP (45.2%) in alkaline electrolytes.

Ni3C/Ni3S2 Heterojunction Electrocatalyst for Efficient Methanol Oxidation via Dual Anion Co-modulation Strategy.

Enhancing active states on the catalyst surface by modulating the adsorption-desorption properties of reactant species is crucial to optimizing the electrocatalytic activity of transition metal-based nanostructured materials. In this work, an efficient optimization strategy is proposed by co-modulating the dual anions (C and S) in Ni3C/Ni3S2, the heterostructured electrocatalyst, which is prepared via a simple hot-injection method. The presence of Ni3C/Ni3S2 heterojunctions accelerates the charge carrier transfer and promotes the generation of active sites, enabling the heterostructured electrocatalyst to achieve current densities of 10/100mA cm-2 at 1.37V/1.53V. The Faradaic efficiencies for formate production coupled with hydrogen evolution approach 100%, accompanied with a stability record of 350h. Additionally, operando electrochemical impedance spectroscopy (EIS), in situ Raman spectroscopy, and density functional theory (DFT) calculations further demonstrate that the creation of Ni3C/Ni3S2 heterointerfaces originating from dual anions' (C and S) differentiation is effective in adjusting the d-band center of active Ni atoms, promoting the generation of active sites, as well as optimizing the adsorption and desorption of reaction intermediates. This dual anions co-modulation strategy to stable heterostructure provides a general route for constructing high-performance transition metal-based electrocatalysts.

Unique Multi-Hetero-Interface Engineering of Fe-Doped Co-LDH@MoS2-Ni3S2 Nanoflower-Based Electrocatalyst for Overall Water-Splitting: An Experimental and Theoretical Investigation.

Herein, a self-supported, robust, and noble-metal-free 3D hierarchical interface-rich Fe-doped Co-LDH@MoS2-Ni3S2/NF heterostructure electrocatalyst has been prepared through a controllable two-step hydrothermal process. The resultant electrode shows low overpotential of ~95 mV for hydrogen evolution reaction (HER), ~220 mV for the oxygen evolution reaction (OER),and the two-electrode system requires only a cell voltage of ~1.54 V at 10 mA cm-2 current density, respectively. Extensive ab initio calculations were carried out to find out the overpotential for HER, orbital interaction through the determination of electron density of states and quantification of charge transfer by Bader charge analysis. The computed overpotential matched closely with the experimental data. The superior HER performance of the tri-layer is enhanced due to the charge transfer (1.7444 e) to Fe-doped Co-LDH from Ni3S2-MoS2 hybrid. This research strategy paves an effective pathway for affordable green H2 production and future efficient non-precious bifunctional electrocatalyst design for overall water electrolysis.

Electrochemically Active MoO3/TiN Sulfur Host Inducing Dynamically Reinforced Built-in Electric Field for Advanced Lithium-Sulfur Batteries.

Although various electrocatalysts have been developed to ameliorate the shuttle effect and sluggish Li-S conversion kinetics, their electrochemical inertness limits the sufficient performance improvement of lithium-sulfur batteries (LSBs). In this work, an electrochemically active MoO3/TiN-based heterostructure (MOTN) is designed as an efficient sulfur host that can improve the overall electrochemical properties of LSBs via prominent lithiation behaviors. By accommodating Li ions into MoO3 nanoplates, the MOTN host can contribute its own capacity. Furthermore, the Li intercalation process dynamically affects the electronic interaction between MoO3 and TiN and thus significantly reinforces the built-in electric field, which further improves the comprehensive electrocatalytic abilities of the MOTN host. Because of these merits, the MOTN host-based sulfur cathode delivers an exceptional specific capacity of 2520mA h g-1 at 0.1 C. Furthermore, the cathode exhibits superior rate capability (564mA h g-1 at 5 C), excellent cycling stability (capacity fade rate of 0.034% per cycle for 1200 cycles at 2 C), and satisfactory areal capacity (6.6mA h cm-2) under a high sulfur loading of 8.3mg cm-2. This study provides a novel strategy to develop electrochemically active heterostructured electrocatalysts and rationally manipulate the built-in electric field for achieving high-performance LSBs.

Ti3C2 MXene nanosheets integrated cobalt-doped nickel hydroxide heterostructured composite: An efficient electrocatalyst for overall water-splitting

Developing an efficient electrocatalyst for superior electrochemical water splitting (EWS) is crucial for achieving comprehensive hydrogen production. A heterostructured electrocatalyst, free of noble metals, Ti3C2 MXene nanosheet-integrated cobalt-doped nickel hydroxide (NHCoMX) composite was synthesized via a hydrothermal method. The abundant pores in the Ti3C2 MXene nanosheet (MX)–integrated microarchitecture increased the number of active sites and facilitated charge transfer, thus enhancing electrocatalysis. Specifically, the MX-enhanced charge transfer considerably transformed the microelectronic structure of cobalt-doped Ni(OH)2 (NHCo), which promoted its hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Hence, as an EWS catalyst, NHCoMX exhibited an exceptional electrocatalytic activity, demonstrating OER and HER overpotentials of 310 mV and 73 mV, respectively, with low Tafel slopes of 65 mV dec−1 and 85 mV dec−1, respectively; it exhibited a current density of 10 mV cm−2 in 1.0 mol L−1 KOH, representing the closest efficiency to the noble state-of-the-art RuO2 and Pt/C catalyst. Furthermore, the developed electrocatalyst improved the activities of both HER and OER, leading to an overall EWS current density of 10 mA cm−2 at 1.72 V in an alkaline electrolyte with two electrodes. This study describes an efficient heterostructured NHCoMX composite electrocatalyst. It is significantly comparable to the noble state-of-the-art electrocatalysts and can be extended to fabricate resourceful catalysts for large-scale EWS applications.

Modulation of the multiphase phosphorus/sulfide heterogeneous interface via rare earth for solar‐enhanced water splitting at industrial‐level current densities

AbstractPhotoelectrically coupling water splitting at high current density is a promising approach for the acquisition of green hydrogen energy. However, it places significant demands on the photo/electrocatalysts. Herein, rare earth elements doping NiMoO4‐based phosphorus/sulfide heterostructure nanorod arrays (RE‐NiMo‐PS@NF [RE = Y, Er, La, and Sc]) are obtained for solar‐enhanced electrocatalytic water splitting at high current densities. The results of the experiment and density‐functional theory studies illustrate that the Y element as a dopant not only makes the NiMoP2/NiMo3S4/NiMoO4 heterostructure exhibit excellent solar‐enhanced electrocatalytic activity (hydrogen evolution reaction [HER]: η1000 = 211 mV, oxygen evolution reaction [OER]: η1000 = 367 mV) but also optimizes the heterostructure interfacial electron density distributions and HER free energy. In addition, Y‐NiMo‐PS@NF achieves 18.64% solar‐to‐hydrogen efficiency. This study not only provides a new way to synthesize heterostructure electrocatalysts but also inspires the application of solar enhancement strategies for high current density water splitting.

Rational design of highly corrosion-resistant chromium hydroxide coupled amorphous-crystalline heterostructure to achieve efficient and stable seawater oxygen evolution

The pressing issues of global energy scarcity and water shortages can be substantially mitigated through the electrolysis of seawater. In this study, we synthesized a unique lamellar amorphous-crystalline heterostructure electrocatalyst by integrating the amorphous chromium hydroxide (Cr-OH) with the crystalline NiFe layered double hydroxides (NiFe LDH). The resulting Cr-OH/NiFeLDH@NF exhibited an exceptionally low oxygen evolution reaction (OER) overpotential and strong corrosion resistance. The development of the crystalline-amorphous heterointerface significantly influenced electronic coupling and enhanced electron transfer rates. Through the methanol response mechanism, it was demonstrated that the Cr-OH enhanced the catalyst’s corrosion resistance in chloride-rich environments and significantly extended its durability in seawater. Operative Raman spectroscopy confirmed that the high OER activity and corrosion resistance of Cr-OH/NiFeLDH@NF originated from the preferential oxidation of the outer Cr-OH layer, which promoted the electrochemical oxidation of Ni2+ to Ni4+, and the stable Cl− resistant environment formed by the in-situ generated and dissolved CrO42−.

Bionic Design of Iron-Doped MoSe2 Catalyst for Efficient Nitrogen Fixation.

The catalytic system of biological nitrogen fixation in nature primarily relies on the "FeMo cofactor" within nitrogenase enzymes. Inspired by this natural structure, we have designed a bionic inorganic counterpart, iron-doped MoSe2, for the efficient electroreduction of dinitrogen to ammonia. The introduced Fe dopant significantly enhances nitrogen fixation activity of MoSe2. Furthermore, we constructed a heterostructure catalyst, the Fe-MoSe2/Mo2C with more versatile Mo valence states. The heterostructured electrocatalyst achieves an ammonia production rate of 3.38 μg cm-2 h-1, and a Faradaic efficiency of 30.8 %, which is ~5 fold higher than that of pristine MoSe2. This study presents a novel approach for designing bionic nitrogen fixation electrocatalysts.

Cation vacancy modulated Cu3P-CoP heterostructure electrocatalyst for boosting hydrogen evolution at high current densities and coupling Zn-H2O battery

Exploiting highly efficient, cost-effective and stable electrocatalysts is key to decreasing hydrogen evolution reaction (HER) kinetics energy barrier. Herein, the alkaline HER kinetics energy barrier can greatly reduce by the joint strategies of the cation vacancy and heterostructure engineering, which is seldom explored and remains ambiguous. In this study, an efficient and stable copper foam-supported Cu3P-CoP heterostructure electrocatalyst with cation vacancy defects (defined as Cu3P-CoP-VAl/CF) was designed for HER via the successive coprecipitation, electrodeposition, alkali etching and phosphorization treatments. As anticipated, the as-obtained Cu3P-CoP-VAl/CF electrocatalyst reveals a remarkable catalytic activity for HER with a low overpotential of 205 mV at a current density of 100 mA·cm−2, a high turnover frequency value of 1.05 s−1 at an overpotential of 200 mV and a small apparent activation energy (Ea) of 9 kJ·mol−1, while shows superior long-term stability at large current densities of 100 and 240 mA·cm−2. Systematic experiment and characterization data demonstrate that the formed cation vacancy could optimize the Ea, leading to the decrease of the kinetic barriers of Cu3P-CoP/CF heterostructure, as well as the established heterogeneous interface induced a synergistic effect between biphasic components on boosting the kinetics toward HER. The results of density functional theory disclose that the synergistic effect of Cu3P-CoP heterostructure could decrease the energy barrier and optimize Gibbs free energy of hydrogen adsorption, resulting in the enhancement of intrinsic catalytic activity of Cu3P-CoP-VAl/CF. More significantly, the alkali-cell assembled by Cu3P-CoP-VAl/CF (cathode) and RuO2/CF (anode) behaves outstanding water splitting performance, delivering a current density of 10 mA·cm−2 at a relatively small applied voltage of 1.58 V, along with encouraging long-term durability. In addition, the alkaline Zn-H2O battery with Cu3P-CoP-VAl/CF as the cathode has been fabricated for the simultaneous generation of electricity and hydrogen, which displays a large power density of up to 4.1 mW·cm−2. The work demonstrates that rational strategy for the design of competent electrocatalysts can effectively accelerate the kinetics of HER, which supplies valuable insights for practical applications in overall water splitting.

Interface Engineering via Ti3C2Tx MXene Enabled Highly Efficient Bifunctional NiCoP Array Catalysts for Alkaline Water Splitting.

Developing a non-noble metal-based bifunctional electrocatalyst with high efficiency and stability for overall water splitting is desirable for renewable energy systems. We developed a novel method to fabricate a heterostructured electrocatalyst, comprising a NiCoP nanoneedle array grown on Ti3C2Tx MXene-coated Ni foam (NCP-MX/NF) using a dip-coating hydrothermal method, followed by phosphorization. Due to the abundance of active sites, enhanced electronic kinetics, and sufficient electrolyte accessibility resulting from the synergistic effects of NCP and MXene, NCP-MX/NF bifunctional alkaline catalysts afford superb electrocatalytic performance, with a low overpotential (72 mV at 10 mA cm-2 for HER and 303 mV at 50 mA cm-2 for OER), a low Tafel slope (49.2 mV dec-1 for HER and 69.5 mV dec-1 for OER), and long-term stability. Moreover, the overall water splitting performance of NCP-MX/NF, which requires potentials as low as 1.54 and 1.76 V at a current density of 10 and 50 mA cm-2, respectively, exceeded the performance of the Pt/C∥IrO2 couple in terms of overall water splitting. Density functional theory (DFT) calculations for the NCP/Ti3C2O2 interface model predicted the catalytic contribution to interfacial formation by analyzing the electronic redistribution at the interface. This contribution was also evaluated by calculating the adsorption energetics of the descriptor molecules (H2O and the H and OER intermediates).

Energy‐Efficient Co‐production of Benzoquinone and H2 Using Waste Phenol in a Hybrid Alkali/Acid Flow Cell

AbstractIn both the manufacturing and chemical industries, benzoquinone is a crucial chemical product. A perfect and economical method for making benzoquinone is the electrochemical oxidation of phenol, thanks to the traditional thermal catalytic oxidation of phenol process requires high cost, serious pollution and harsh reaction conditions. Here, a unique heterostructure electrocatalyst on nickel foam (NF) consisting of nickel sulfide and nickel oxide (Ni9S8‐Ni15O16/NF) was produced, and this catalyst exhibited a low overpotential (1.35 V vs. RHE) and prominent selectivity (99 %) for electrochemical phenol oxidation reaction (EOP). Ni9S8‐Ni15O16/NF is beneficial for lowering the reaction energy barrier and boosting reactivity in the EOP process according to density functional theory (DFT) calculations. Additionally, an alkali/acid hybrid flow cell was successfully established by connecting Ni9S8‐Ni15O16/NF and commercial RuIr/Ti in series to catalyze phenol oxidation in an alkaline medium and hydrogen evolution in an acid medium, respectively. A cell voltage of only 0.60 V was applied to produce a current density of 10 mA cm−2. Meanwhile, the system continued to operate at 0.90 V for 12 days, showing remarkable long‐term stability. The unique configuration of the acid‐base hybrid flow cell electrolyzer provides valuable guidance for the efficient and environmentally friendly electrooxidation of phenol to benzoquinone.

Energy-Efficient Co-production of Benzoquinone and H2 Using Waste Phenol in a Hybrid Alkali/Acid Flow Cell.

In both the manufacturing and chemical industries, benzoquinone is a crucial chemical product. A perfect and economical method for making benzoquinone is the electrochemical oxidation of phenol, thanks to the traditional thermal catalytic oxidation of phenol process requires high cost, serious pollution and harsh reaction conditions. Here, a unique heterostructure electrocatalyst on nickel foam (NF) consisting of nickel sulfide and nickel oxide (Ni9S8-Ni15O16/NF) was produced, and this catalyst exhibited a low overpotential (1.35 V vs. RHE) and prominent selectivity (99 %) for electrochemical phenol oxidation reaction (EOP). Ni9S8-Ni15O16/NF is beneficial for lowering the reaction energy barrier and boosting reactivity in the EOP process according to density functional theory (DFT) calculations. Additionally, an alkali/acid hybrid flow cell was successfully established by connecting Ni9S8-Ni15O16/NF and commercial RuIr/Ti in series to catalyze phenol oxidation in an alkaline medium and hydrogen evolution in an acid medium, respectively. A cell voltage of only 0.60 V was applied to produce a current density of 10 mA cm-2. Meanwhile, the system continued to operate at 0.90 V for 12 days, showing remarkable long-term stability. The unique configuration of the acid-base hybrid flow cell electrolyzer provides valuable guidance for the efficient and environmentally friendly electrooxidation of phenol to benzoquinone.

Improved hydrogen generation integrated with methanol electrooxidation by manganese selenide/cobalt selenide heterostructure electrocatalyst

The electro-oxidation of mono-alcohol molecules to produce valuable products in combination with the formation of hydrogen is not an easy process. Herein, the manganese selenide/cobalt selenide hetero-nanoparticles embedded in nitrogen-doped carbon (namely MnSe/Co0.85Se@NC) are fabricated as high-performance catalysts by regulating electronic structures through heterointerface engineering. Experimental and theoretical results demonstrate that the formation of MnSe/Co0.85Se heterostructure will take charges from the Co0.85Se sites, which is advantageous to the adsorption of mono-alcohol molecules and thus makes Co0.85Se a high-performance electrocatalyst for mono-alcohol oxidation reactions (M−AOR). Notably, the activity order of M−AOR on the MnSe/Co0.85Se@NC electrode is methanol > ethanol > n-propanol > isopropanol. Furthermore, the charge transfer from Co0.85Se to MnSe occurs, resulting in a strong electronic interaction at the heterointerface of MnSe/Co0.85Se, giving it superior HER activity. Impressively, MnSe/Co0.85Se@NC can be used as a bifunctional catalyst for methanol-assisted water electrolysis in a two-electrode configuration, which only demands a cell potential of 1.49 V to obtain the 10 mA cm−2 current density, accompanying with valuable formate generation at the anode and hydrogen generation at the cathode. This tactic employing a heterogeneous electrocatalyst to produce high-value chemicals is considered of great importance in the development of new energy technology.

Manganese-decorated CoP@CoFe2O4 nanorod arrays for high-efficiency alkaline water oxidation

Regulating the intrinsic activity of electrocatalysts is an effective strategy towards outstanding behaviour for oxygen evolution reaction (OER). Herein, the rational design of a Mn–CoP@CoFe2O4 core-shell heterojunction using nickel foam (NF) as a supporting material with special interface engineering has been investigated by a facile hydrothermal technique combined with phosphorization and electrodeposition method. The physical characterization demonstrates Mn–CoP@CoFe2O4 core-shell heterostructure with Mn–CoP nanoneedles as core and CoFe2O4 nanosheets as shell has been successfully acquired. The electrochemical measurements of the as-prepared Mn–CoP@CoFe2O4/NF core-shell heterojunction nanoarray electrode exhibit the superior electrocatalytic behaviour for OER (Tafel slope of 35.6 mV dec−1 and overpotential of 209.6 mV@10 mA cm−2). The remarkable OER behaviour may be ascribed to the sufficient active sites and the enhanced intrinsic activity due to the introduction of CoFe2O4 and Mn element, which can regulate the electron structure and increase the turnover frequency. Furthermore, the Mn–CoP@CoFe2O4/NF electrode appears an excellent long-run stability during the OER process at 100 mA cm−2 for 100 h. Therefore, the construction of metal doping transition metal-based core-shell heterostructure electrocatalysts may be a promising way for the remarkable OER electrocatalytic performance towards water splitting.

Asymmetric Bond Delta‐Polarization at the Interfacial Se─Ru─O Bridge for Efficient pH‐Robust Water Electrolysis

AbstractThe rationalization of pH‐robust catalysis is highly desired but challengeable for overall water electrolysis (WE). It requests a metal active site that can make an efficient adaption with both cathodic hydrogen and anodic oxygen evolution reactions (HER/OER). Herein, a RuO2‐x/RuSe2 heterostructure electrocatalyst is profiled with interfacial Se─Ru─O bridge for the pH‐robust water splitting studies. An asymmetric bond delta‐polarization (Δp) is found at the interfacial Se─Ru─O bridge, including the Δp > 0 at the Ru─O part and Δp < 0 at the Ru─Se side by both experiment and calculation results. The enlarged Ru─O bond polarizability (Δp > 0) can in principle trigger the lattice oxygen mediated (LOM) pathway for OER; meanwhile, the reduced Ru─Se bond polarizability can benefit the HER due to the strengthened d‐p band hybridization. Resultantly, the heterostructure can deliver ultralow overpotentials of 25/10 mV for Pt‐beyond HER and 210/255 mV for OER at 10 mA cm−2 in acidic/alkaline media, respectively. In especial, the acidic overall WE can be stably operated for 200 h with a low cell voltage of 1.478 V at 10 mA cm−2. This research clarifies the asymmetric bond polarization as the criterion for the rational design of efficient WE catalysts.

Synergistic engineering of doped Ni2P-Ni12P5 heterostructure electrocatalysts for urea oxidation reaction

Urea oxidation reaction (UOR) is regarded as a potential approach for industrial hydrogen production to address energy scarcity and water pollution challenges. Fabrication of efficient and stable electrocatalysts is a crucial factor in H2 yield and energy conversion efficiency. Herein, we propose a synergistic engineering route to develop the heteroatom-doped Ni2P-Ni12P5 heterojunction on the porous carbon as the electrocatalyst via the simple solution combustion method. The shift of the diffraction peaks, the change of the lattice spacing, and the difference in the electronic distribution indicate that Cu or Mn heteroatoms are successfully doped into the heterojunction Ni2P-Ni12P5 structure, not only promoting the formation of the Ni3+ but also accelerating the electron transfer. As a result, the doping of Cu and Mn into the Ni2P-Ni12P5 heterojunction obtains high-performance electrocatalysts for the UOR. The Mn doping enhances the catalytic performance of the parent Ni2P-Ni12P5 heterostructure, achieving the potential of 1.319 V at 100 mA∙cm−2 in UOR. Moreover, the Cu-doped Ni2P-Ni12P5 heterojunction catalyst shows a low potential of 1.318 V at 100 mA∙cm−2 and demonstrates exceptional long-term stability under different current densities. Notably, when this catalyst is employed in the two-electrode cell for urea-assisted water electrolysis, the hydrogen production readily occurs at the voltage of 1.47 V for reaching 100 mA∙cm−2, manifesting the electrocatalyst with high activity and stability to be a promising candidate for energy-saving electrolytic hydrogen production on the industrial scale.

Wood-Structured Nanomaterials as Highly Efficient, Self-Standing Electrocatalysts for Water Splitting.

Electrocatalytic water splitting (EWS) driven by renewable energy is widely considered an environmentally friendly and sustainable approach for generating hydrogen (H2), an ideal energy carrier for the future. However, the efficiency and economic viability of large-scale water electrolysis depend on electrocatalysts that can efficiently accelerate the electrochemical reactions taking place at the two electrodes. Wood-derived nanomaterials are well-suited for serving as EWS catalysts because of their hierarchically porous structure with high surface area and low tortuosity, compositional tunability, cost-effectiveness, and self-standing integral electrode configuration. Here, recent advancements in the design and synthesis of wood-structured nanomaterials serving as advanced electrocatalysts for water splitting are summarized. First, the design principles and corresponding strategies toward highly effective wood-structured electrocatalysts (WSECs) are emphasized. Then, a comprehensive overview of current findings on WSECs, encompassing diverse structural designs and functionalities such as supported-metal nanoparticles (NPs), single-atom catalysts (SACs), metal compounds, and heterostructured electrocatalysts based on engineered wood hosts are presented. Subsequently, the application of these WSECs in various aspects of water splitting, including the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), overall water splitting (OWS), and hybrid water electrolysis (HWE) are explored. Finally, the prospects, challenges, and opportunities associated with the broad application of WSECs are briefly discussed. This review aims to provide a comprehensive understanding of the ongoing developments in water-splitting catalysts, along with outlining design principles for the future development of WSECs.

A robust and highly active bimetallic phosphide/oxide heterostructure electrocatalyst for efficient industrial-scale hydrogen production

Efficient and durable high-current-density bifunctional electrocatalysts are vital for cost-effective production of alkaline water electrolyzers (AWEs) on an industrial scale. However, existing commercial catalysts, such as Raney Ni which requires over 2.5 V for just 500 mA cm−2, fail to achieve high current densities with low cell voltages. In this study, we introduce a bifunctional RuP2/Ni5P4/NiMoO4 heterostructure electrocatalyst, synthesized via a facile hydrothermal method, followed by the controlled addition of ruthenium (Ru) and subsequent phosphorization. This process yielded (Ru, Ni) phosphides and NiMoO4 with a moderate weight percentage and mass loading of Ru content, approximately 1.02 wt% and 61 μg cm−2, respectively. The synergistic effect of these phosphides and bimetallic oxides significantly improves water dissociation, as well as the hydrogen and oxygen evolution reaction (HER and OER) performances. Under industrial conditions (80 °C and 6 M KOH), our catalyst achieves low overpotentials of 273 mV for HER and 390 mV for OER at 2000 mA cm−2, outperforming commercial Pt/C and RuO2 catalysts. Additionally, in an AWE, our catalyst maintains a low operating voltage of 1.76 V for 1 A cm−2, with consistent performance over 100 h at 500 mA cm−2. It records an electricity consumption of 3.97 kW h Nm−³ and an electrolyzer efficiency of 89.1%, underscoring its potential for cost-effective industrial applications. Furthermore, accelerated degradation tests under variable current loads show no significant change in cell voltage and high-frequency resistance (HFR), demonstrating robustness for intermittent energy sources. This work proposes a novel design principle for high-performance electrocatalysts, significantly reducing reliance on noble metals and offering a robust, efficient solution for industrial-scale hydrogen production.

Interface engineering of MoS2–CoS2 heteronanosheets for enhanced electrochemical hydrogen evolution reaction

The heterostructured electrocatalysts with tunable electronic interaction and distinct synergetic effects have been confirmed as an efficient strategy for realizing high-performance hydrogen evolution reaction (HER). Herein, a simple synthetic strategy is reported for the growth of MoS2–CoS2 nanosheets on highly conductive reduced graphene oxide (MoS2–CoS2/RGO) to innovatively construct an electron-reconfiguration heterointerface. The strong electronic interactions between MoS2 and CoS2 interfaces lead to the redistribution of charge, which optimizes the adsorption-desorption of intermediates. Thus, the MoS2–CoS2/RGO exhibits superior catalytic activity toward HER with small overpotentials of 67 mV (1.0 M KOH) and 95 mV (0.5 M H2SO4), and remarkable stability. In addition, theoretical calculations reveal the redistribution of charge at the heterointerfaces, which decreases the energy barrier of adsorption for H intermediates and simultaneously enhances the kinetic of water dissociation. This work provides a simple strategy for designing heterostructured bimetallic electrocatalysts with a highly active interface.