Heterojunction Photocatalyst Research Articles

Harnessing visible light for sustainable biodiesel production with Ni/Si/MgO photocatalyst

Sustainable energy sources frequently demonstrate greater reliability and resilience in comparison to conventional energy sources. Biodiesel, with its markedly reduced carbon footprint when compared to petroleum-based diesel fuel, owes this advantage to its production from renewable resources. Heterojunction photocatalysts have gained significant interest due to their immense promise in tackling environmental challenges. In this study, a highly efficient photocatalyst, Ni/Si/MgO, for biodiesel production under visible light irradiation was synthesized using a solid-phase reaction method with silica as the silicon source, along with Ni and MgO. The surface functionality of Ni/Si/MgO was crucial for achieving high efficiency of photocatalytic systems, as evident from XPS. The transesterification reaction on the Ni/Si/MgO photocatalyst proceeds by the formation of SiH and SiOH bonds over the catalyst. The photocatalytic activities of Ni/Si/MgO photocatalysts were higher than those of the Si/MgO nanoparticle when exposed to light. Achieving an optimal yield of 98 %, the biodiesel production was carried out under the following reaction conditions: A catalyst dosage of 2 % by weight was utilized, along with a methanol-to-oil molar ratio of 12:1, and the entire procedure was executed within a duration of 3.5 h. Plasmonic near-fields are speculated to be responsible for the increased transesterification activity along the Ni/Si/MgO interface. In order to carry out the transesterification reaction, electron-hole pairs are generated along the Ni/Si/MgO interface, where plasmonic near-fields are highly concentrated. This study contributes a significant perspective on mechanisms governing the process of efficient plasmonic photocatalysis responsive to visible light. These findings hold the potential to offer valuable guidance in the formulation and design of next-generation, high-performance photocatalysts.

Novel 3D plate-like g-C3N4/BiOCl heterojunction as a highly efficient photocatalyst for the degradation of carbofuran in wastewater under visible light irradiation

The g-C3N4/BiOCl (gCN-BCl) heterojunction photocatalyst was synthesized using a low-temperature precipitation method for effective photocatalytic degradation of carbofuran (CBF). All gCN-BCl composites demonstrate greater efficacy in removing CBF compared to its individual constituents. The synergistic effect of incorporating the 0D structured BiOCl onto the 2D structured g-C3N4 was comprehensively examined using various microscopic, X-ray, and spectroscopic analytical techniques. Additionally, optical and photoelectrochemical analyses were conducted. The findings validated that the interaction between the two semiconductors at the heterointerfaces enhanced remarkable physical and structural stability, promoted high charge separation and transfer properties, and improved photocatalytic degradation. Under optimal conditions, 5-gCN-BCl (0.25 g/L) achieved a CBF (5 mg/L) removal efficiency of 95.7 % under visible light irradiation of 120 min, achieving 3.1- and 5.9-times higher degradation rate than the pure BiOCl and g-C3N4, respectively. The radical trapping experiments indicated that the h+ and •O2− were the primary reactive species involved in the CBF degradation. Furthermore, the potential toxicity of CBF and its intermediates was assessed, revealing that the photocatalytic degradation process significantly lowered the ecotoxicity of pesticide wastewater. The potency of 5-gCN-BCl was also evaluated in tap water and real wastewater samples, with CBF degradation efficiencies of 85.8 %, 47.6 %, and 38.7 % in tap water, municipal, and pesticide industry wastewater, respectively. Additionally, artificial neural network (ANN) modeling was employed to predict and optimize the photocatalytic degradation process, providing further insights into the system’s performance. The outcomes of this work offer valuable insights into the development of heterojunction photocatalysts with superior stability and efficacy for eliminating pesticides from water bodies.

In situ construction of Flowerlike bismuth oxide (BiO2-x)/N-rich carbon nitride (C3N5) S-scheme heterojunctions with enhanced structural defects for the efficient photocatalytic removal of tetracycline antibiotic and RhB

Efficient photocatalysts for the simultaneous removal of organic dyes and antibiotics are crucial for sustainable environmental management. In this study, we designed and synthesized a C3N5/BiO2-x S-type heterojunction photocatalyst with structural defects using a hydrothermal method, aimed at degrading both Rhodamine B (RhB) and tetracycline (TC). The degradation kinetic constants for RhB and TC were 0.0809 min−1 and 0.0535 min−1, respectively, showing improvements of 9.52 and 25.48 times over pure C3N5, and 2.90 and 1.49 times over BiO2-x. This enhanced performance is attributed to the unique electron transfer mechanism of the S-scheme heterojunction and the structural defects that facilitate efficient separation of electron-hole (e−-h+) pairs. Free radical trapping experiments indicated that the main reactive oxygen species (ROS) involved are ·O2− and h+. Additionally, electrochemical impedance spectroscopy (EIS) and transient photocurrent response (TPR) measurements confirmed improved separation and transfer of photogenerated e−-h+ pairs in the C3N5/BiO2-x heterojunction. The higher density of structural defects in C3N5/BiO2-x compared to individual BiO2-x counterparts enhances its ability to activate and photo-oxidize TC and degrade RhB. Consequently, C3N5/BiO2-x demonstrates significant potential as a photocatalyst for improving water quality.

Biochar coupling induced charge transfer switching of a NiAl2O4/NiCr2O4 photocatalyst to enhance photocatalytic degradation of tetracycline hydrochloride

A series of novel (NiAl2O4 (NAO)/NiCr2O4 (NCO)) (S1)/GL heterojunction photocatalysts, denoting as x%GL/S1 (x = 5, 10, 15 and 20), were prepared by the polyacrylamide gel method combined with low temperature sintering technique. Various characterizations confirm that there is special interfacial contact and charge transfer between NAO, NCO and GL. The 10%GL/S1 heterojunction exhibited the best photocatalytic activity and cyclic stability for the degradation of tetracycline hydrochloride (TC). Compared to NAO, NCO and NAO/NCO, the degradation efficiency of 10%GL/S1 was significantly improved, and the degradation percentage reached 83.2% within 30 min. The activity of 10%GL/S1 was studied in relation to catalyst content, drug concentration, pH value, water quality, and co-existing anion. Trapping experiments and free radical verification experiments confirmed that the holes, hydroxyl radicals and superoxide radicals played crucial roles in the photocatalysis process. Possible pathways for TC degradation were studied by HPLC-MS, and the ecotoxicity of TC and its degradation intermediates was evaluated by T.E.S.T. software. The charge transfer and photocatalytic mechanisms confirm that the introduction of GL enhances the interfacial interaction between the components, promotes the carrier migration efficiency, provides a large number of active sites for 10%GL/S1 heterojunction, and produces active free radicals after redox reaction with photoinduced electrons, effectively improving the degradation efficiency of TC.

Synergetic effect of photocatalysis and peroxymonosulphate activated by MIL-53Fe@PDI Z-scheme heterojunction photocatalyst for removal of doxycycline hydrochloride

Synergetic effect of photocatalysis and peroxymonosulphate activated by MIL-53Fe@PDI Z-scheme heterojunction photocatalyst for removal of doxycycline hydrochloride

Recent Advances in Photocatalytic Degradation of Tetracycline Antibiotics

China is a significant global producer and consumer of pesticides and antibiotics, with their excessive use leading to substantial water pollution that poses challenges for subsequent treatment. Photocatalytic degradation, leveraging renewable solar energy, presents an effective approach for decomposing organic pollutants and reducing residual contaminant levels in water bodies. This approach represents one effective way for addressing environmental challenges. This paper classifies representative photocatalytic materials by structural design and degradation principles including MOFs (Metal–Organic Frameworks), metal- and nonmetal-doped, mesoporous material-loaded, carbon quantum dot-modified, floatation-based, and heterojunction photocatalysts. We also discuss research on degradation pathways and reaction mechanisms for antibiotics. Of particular importance are several key factors influencing degradation efficiency, which are summarized within this work. These include the separation and charge transfer rate of catalyst surface carriers, and the wide-spectrum response capabilities of photocatalysts, as well as persulfate activation efficiency. Furthermore, emphasis is placed on the significant role played by intrinsic driving forces such as built-in electric fields within catalytic systems. Moreover, this paper introduces several promising composite-structure photocatalytic technologies from both composite-structure perspectives (e.g., Aerogel-based composites) and composite-method perspectives (e.g., the molecularly imprinted synthesis method). We also discuss their latest development status, along with future prospects, presenting valuable insights for pollutant degradation targets. This work aims to facilitate the design of efficient photocatalytic materials, while providing valuable theoretical references for environmental governance technologies.

Multifunctional Conductive MOFs Enhance the Photocatalytic Hydrogen Evolution Efficiency of S-Type Ni3(HITP)2/TiO2 Heterojunctions.

Despite their high surface area, remarkable porosity, and efficient charge transfer mechanisms, conductive MOFs have found limited utilization within the domain of photocatalysis. In this study, we synthesized a cutting-edge S-type Ni3(HITP)2/TiO2 heterojunction photocatalyst exhibiting outstanding light harvesting and prolonged lifetime of photogenerated electrons through an in situ synthesis approach. Compared with TiO2, the composite materials not only significantly increase the specific surface area by 4.07 times but also expand the visible light absorption edge from 400 to 1100 nm. The hydrogen production rate of Ti/Ni-3 reached 4.927 mmol·g-1·h-1, which is 4.51 times that of TiO2. The S-type interface charge transfer pathway of the Ni3(HITP)2/TiO2 composite material was inferred by band structure, in situ XPS, SPV, and free radical capture, which improves charge separation and extends the carrier lifetime to undergo directional migration driven by an IEF. This is the main reason for the improved photocatalytic performance of Ni3(HITP)2/TiO2 composite materials.

Construction of direct Z-scheme Sn3O4/WO3 heterostructure photocatalyst for enhanced Congo red degradation and Cr(Ⅵ) reduction performance

The development of well-designed architectures is crucial in accelerating the transport of photon-generated carriers in composite photocatalysts. In this study, a direct Z-scheme Sn3O4/WO3 (SW) photocatalyst was successfully fabricated utilizing a straightforward hydro/solvothermal approach, where Sn3O4 nanosheets (NSs) grew in-situ onto WO3 nanorods (NRs) uniformly. The optimal SW-2 composite exhibits a remarkable reduction rate of 93.5 % for Congo Red (CR) within 40 min, with a rate constant (k) of 0.075 min−1. This performance surpasses that of pristine Sn3O4 and WO3, which have rate constants of 0.027 min−1 and 0.018 min−1, respectively. Additionally, the SW-2 composite effectively removes 89.2 % of Cr(VI) over 100 min, achieving a k value of 0.019 min−1, which is higher than that of Sn3O4 (0.013 min−1) and WO3 (0.001 min−1). Furthermore, the photocatalytic degradation performance of the recovered samples retains their photocatalytic degradation performance after five consecutive experimental cycles, indicating excellent durability. The enhanced photocatalytic performance can be attributed to the construction of a direct Z-scheme heterostructure, which not only broadens the spectral response range, bur also ensures efficient separation of photoexcited carriers and fosters robust photo-redox capacity within the composite. This study is expected to provide some valuable insights into the design and synthesis of Z-scheme heterojunction photocatalysts, aimed at addressing pressing environmental pollution challenges.

Efficient Oxygen-Accelerated Near-Infrared Photoinduced Atom Transfer Radical Polymerization Mediated with S-Scheme Heterojunction Photocatalyst Composed of Lead-Free Halide Perovskite Encapsulated into Metal–Organic Framework

Efficient Oxygen-Accelerated Near-Infrared Photoinduced Atom Transfer Radical Polymerization Mediated with S-Scheme Heterojunction Photocatalyst Composed of Lead-Free Halide Perovskite Encapsulated into Metal–Organic Framework

Construction of magnetic FeP/CdS composites as photo‐Fenton‐like catalysts to realize high‐efficiency degradation of tetracycline hydrochloride

Photocatalysis is an efficient technology for the degradation of pollutants. However, it still needs to be improved. In this study, magnetic Z‐scheme FeP/CdS composites heterojunction photocatalysts were prepared by a facile hydrothermal method, and the structure, morphology, optical and photocatalytic properties of the prepared composites were investigated in detail. The efficiency of tetracycline hydrochloride (TCH) removal by FeP/CdS composites was investigated under different reaction conditions (including different FeP and CdS ratios, catalyst dosage, hydrogen peroxide consumption, temperature, and initial pH). FeP/CdS composites exhibited better catalytic performance compared with pure components. The F1Cd1 composite (mass ratio of FeP to CdS is 1:1) achieved 92.7% removal efficiency of TCH, moreover, the F1Cd1 composite still exhibits a high stability after five consecutive cycles. The capture experiments on the active material showed that the removal of TCH by the F1Cd1 composite was mainly dominated by •OH; however, •O2−, e‐, and h+ played a minor role, and the degradation mechanism was revealed by combining various characterization techniques. The introduction of cadmium sulfide formed an effective photogenerated carrier transport channel at the interface with the iron phosphide surface, which could accelerate the transfer and separation of photo‐excited e‐/h+ pairs, thus improving the degradation performance of TCH.

Enabling Interfacial Lattice Matching by Selective Epitaxial Growth of CuS Crystals on Bi2WO6 Nanosheets for Efficient CO2 Photoreduction into Solar Fuels

Photocatalytic CO2 reduction serves as an important technology for value‐added solar fuel production; however, it is generally limited by interfacial charge transport. To address this limitation, a two‐dimensional/two‐dimensional (2D/2D) p‐n heterojunction CuS‐Bi2WO6 (CS‐BWO) with highly connected and matched interfacial lattices was designed via a two‐step hydrothermal tandem synthesis strategy. The integration of CuS with BWO created a robust interface electric field and provided fast charge transfer channels due to the work function difference, as well as highly connected and matched interfacial lattices. The p‐n heterojunction promoted electron transfer from the Cu to Bi sites, leading to coordination of Bi sites with high electronic density and low oxidation state. The Bi sites in BWO nanosheets facilitated the adsorption and activation of CO2, and generation of high‐coverage key intermediate b‐CO32‐, while broad light‐harvesting CuS (CS) provide abundant photoinduced electrons that were injected into the conduction band of BWO for CO2 photoreduction reaction. Remarkably, the p‐n heterojunction CS‐BWO exhibited CO and CH4 yields of 135.7 and 62.5 µmol g‐1, respectively, which were significantly higher than those of CS, BWO, and physical mixture CS‐BWO nanosheets. This work provided an innovative design strategy for developing high‐activity heterojunction photocatalyst for converting CO2 into value‐added solar fuels.

Enabling Interfacial Lattice Matching by Selective Epitaxial Growth of CuS Crystals on Bi2WO6 Nanosheets for Efficient CO2 Photoreduction into Solar Fuels.

Photocatalytic CO2 reduction serves as an important technology for value-added solar fuel production; however, it is generally limited by interfacial charge transport. To address this limitation, a two-dimensional/two-dimensional (2D/2D) p-n heterojunction CuS-Bi2WO6 (CS-BWO) with highly connected and matched interfacial lattices was designed via a two-step hydrothermal tandem synthesis strategy. The integration of CuS with BWO created a robust interface electric field and provided fast charge transfer channels due to the work function difference, as well as highly connected and matched interfacial lattices. The p-n heterojunctionpromotedelectron transfer from the Cu to Bi sites, leading to coordination of Bi sites with high electronic density and low oxidation state. The Bi sites in BWO nanosheets facilitated the adsorption and activation of CO2, and generation of high-coverage key intermediate b-CO32-, while broad light-harvesting CuS (CS)provide abundant photoinduced electrons that were injected into the conduction band of BWO for CO2 photoreduction reaction. Remarkably, the p-n heterojunction CS-BWO exhibited CO and CH4 yields of 135.7 and 62.5 µmol g-1, respectively, which were significantly higher than those of CS, BWO, and physical mixture CS-BWO nanosheets. This work provided an innovative design strategy for developing high-activity heterojunction photocatalyst for converting CO2into value-added solar fuels.

Hierarchical TiO2 nanostructures sensitized with MoS2 nanosheets: an efficient and reusable heterojunction photocatalyst for sunlight-assisted degradation of organic dye pollutants

Abstract The present study reports the synthesis, characterization, and natural sunlight-driven photocatalytic activity of a novel heterojunction photocatalyst comprised of hierarchical rutile titanium dioxide (r-TiO2) nanostructures and 1T/2H molybdenum disulfide (MoS2)nanosheets. These components were synthesized by solvothermal methods and their effective integration was achieved by using 3- aminopropyltrimethoxysilane as coupling agent. The photocatalytic activity of r-TiO2/MoS2 nanohybrid was explored for the degradation of cationic dye methylene blue (MB), and anionic dye congo red (CR) under natural sunlight. The results reveal that the sunlight-driven photocatalytic activity of pristine r-TiO2 was drastically enhanced upon sensitization with 1T/2H MoS2 nanosheets. The nanohybrid could degrade 99% MB and 98% CR within 150 min with rate constants 25.6×10−3 and 13.2×10−3 min−1respectively. The r-TiO2/MoS2 nanohybrid retained more than 85% of its catalytic activity even after four cycles of reuse. The scavenger test revealed that holes and hydroxyl radicals are mainly responsible for the degradation of MB and CR. The facile synthesis, outstanding catalytic activity under natural sunlight, and excellent recyclability make r-TiO2/MoS2 a promising heterojunction photocatalyst for the degradation of environmental pollutants from wastewater. The present study can provide new insights towards the development of efficient, economical and sustainable photocatalysts for harnessing renewable solar energy for environmental remediation applications.

Photocatalytic hydrogen production and sulfamerazine degradation via a novel dual S-scheme photocatalyst: Nanocomposite synthesis, characterization and mechanism insights

Creating highly effective photocatalysts is crucial for harnessing solar energy to degrade pollutants and produce hydrogen (H₂). In this study, we successfully synthesized a novel dual S-scheme iron oxide (Fe₂O₃)/bismuth oxide (Bi₂O₃)/titanium dioxide (TiO₂) ternary photocatalyst using a straightforward method. This photocatalyst was employed for efficient photocatalytic water splitting and the degradation of the antibiotic sulfamerazine (SMZ) under visible light. Various characterization and photoelectrochemical techniques, including scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), Brunauer–Emmett–Teller surface area analysis (BET), photocurrent measurements, Mott-Schottky analysis, photoluminescence (PL), electrochemical impedance spectroscopy (EIS), and electron spin resonance (ESR), were utilized to analyze the synthesized materials. Among the synthesized nanocomposites, the 15 wt% Fe₂O₃/Bi₂O₃/TiO₂ (15FeBi/TiO₂) composite demonstrated exceptional photocatalytic efficiency, achieving 98 % SMZ degradation and a hydrogen production rate of 590.36 μmol/g·h. Experimental results, including scavenging tests and ESR findings, highlighted the crucial role of hydroxyl radicals (•OH) and superoxide radicals (•O₂−) in the photocatalytic process. Moreover, liquid chromatography-mass spectrometry (LC-MS) results proposed three degradation pathways, and quantitative structure-activity relationship (QSAR) analysis showed that the toxicity of intermediates was effectively reduced. The 15FeBi/TiO₂ photocatalyst also exhibited excellent reusability, retaining about 85 % of its initial activity after five cycles, and proved effective against various pollutants and in real water matrices. This research contributes to the design and development of high-activity heterojunction photocatalysts for superior clean energy generation and pollutant degradation under visible light.

BiOBr/SnO2/ZnO Catalyst With Interfacial Effect Enhanced Photocatalytic Degradation of Organic Dye

ABSTRACTBiOBr nanosheets were loaded onto SnO2 quantum dots, ZnO nanosheets, and SnO2/ZnO‐2 (SZ‐2) to form different heterojunction photocatalysts by sonochemistry, respectively. The photocatalytic activity of the prepared photocatalysts was evaluated by degrading the target dye Rhodamine B (RhB). The results showed that the degradation efficiency of BiOBr/SnO2/ZnO (BSZ) for RhB reached 97.5% at 80 min. The significant increase in catalytic activity of BSZ was attributed to the synergistic and interfacial effects among the three materials. Combined with the radical trapping experiments, it can be concluded that the catalytic mechanism of BSZ as a dual Z‐type heterojunction.

High-efficiency and stable Z-scheme heterojunction of Co9S8 anchored by g-C3N4 for peroxymonosulfate activation

Photocatalytic technology and peroxymonosulfate (PMS) based advanced oxidation technology have been proven to be simple and effective strategies for recalcitrant organic pollutants degradation. In this work, we designed and prepared a coupled photocatalytic and advanced oxidation system for sulfamethazine (SMR) antibiotics degradation. Firstly, a series of Z-scheme Co9S8/g-C3N4 heterojunction photocatalysts are prepared by a simple two-step method and further work as PMS activators. The prepared Co9S8/g-C3N4 photocatalysts exhibit a great improvement in electron-hole pairs migration and visible-light response due to heterojunction formation. In addition, the g-C3N4 acts as a substrate to anchor the Co9S8 nanoparticle, which suppresses the Co9S8 leaching and prevents the Co9S8 oxidation. Consequently, the Co9S8/g-C3N4/PMS system displayed an improved SMR degradation ability (93 % for Co9S8/g-C3N4/PMS vs. 86 % for Co9S8/g-C3N4). After the fourth cyclic degradation experiment, the Co9S8/g-C3N4/PMS system still maintained a comparatively high degradation rate. Considering its good properties and better degradation performance, we propose that the synergistic effect of photocatalytic technology and PMS possess a promising prospect for application in environmental treatment.

An Electron Bridge of Shared Atoms Mediated Cs3Bi2Br9/Bi2WO6 Z‐Scheme Heterojunction for Photocatalytic CO2 Reduction

AbstractConverting clean solar energy into chemical energy through artificial photosynthesis is an effective solution to solve the energy and environmental issues. Here, we report a Cs3Bi2Br9/Bi2WO6 (CBB/BWO) Z‐scheme heterojunction constructed via electrostatic self‐assembly, which facilitates efficient separation of photogenerated carriers and ensures the corresponding redox capacity of both components. By sharing Bi atoms, a Br−Bi−O bond is established between CBB and BWO, serving as an “electron bridge”. The electrons generated by BWO are efficiently channeled to CBB through the heterojunction‐formed “electron bridge”, thereby achieving effective photocatalytic CO2 reduction. Under simulated sunlight conditions, it exhibits the highest CO yield of 72.52 μmol g−1 (without the addition of any precious metal, photosensitizers or sacrifices), which is approximately 7‐fold and 18‐fold greater than that of pure CBB and BWO, respectively. This work provides a more profound comprehension of the regulation of electron transfer through interfacial chemical bonds, thereby proposing a promising strategy for the development of efficient heterojunction photocatalysts for CO2 photoreduction.

Fabrication of pyridine incorporated and O-doped g-C3N4/COF: A type-II heterojunction for enhanced hydrogen production under visible light irradiation

The fabrication of heterojunction photocatalysts is important for achieving highly efficient electron transfer, charge separation, and catalytic activity. In this study, we report the successful creation of a type II heterojunction between pyridine incorporated and O-doped g-C3N4 (POCN) and a covalent organic framework (COF). The heterojunction formation significantly reduced the fluorescence intensity of the POCN/COF, indicating effective separation of electron-hole pairs. Additionally, POCN/COF demonstrated excellent interface charge transfer resistance and photocurrent response. Its hydrogen production rate was remarkably high at 3500 μmol g⁻1 h⁻1, about 1.6 times that of pure COF (2200 μmol g⁻1 h⁻1) and 3.5 times that of the physical mixture (1000 μmol g⁻1 h⁻1), and it also exhibited enhanced stability. This indicates that it can be effectively fabricated into a heterojunction of POCN and COF. The optimal value for adding POCN was approximately 5 wt% of COF. This demonstrates greater activity compared to other composite catalysts made from graphitic carbon nitride and COF. This study presents a valuable approach for fabricating reusable heterojunction photocatalytic systems and efficiently generating hydrogen from natural energy sources.

Constructing dual-channel carrier transport in AgBr/BiOBr/Ag3PO4 heterojunctions for enhanced photocatalytic NO removal

Efficient and stable photocatalysts are indispensable for effectively reducing nitrogen oxide (NOx) emissions. This study presents a facile method for synthesizing AgBr/BiOBr/Ag3PO4 composites and investigates their application in photocatalytic NO removal. The optimized composite exhibited notable performance, achieving 54.95 % removal of NO (approximately 568 ppb reduced to 256 ppb) under visible light irradiation, which is about 1.6 and 2.0 times higher than single Ag3PO4 (34.95 %) and BiOBr (28.01 %), respectively. Comprehensive physicochemical characterization highlighted enhancements in light absorption and the generation of reactive radicals within the AgBr/BiOBr/Ag3PO4 composite. The favorable electronic structure, characterized by well-aligned redox band positions, facilitated efficient dual carrier transport routes, thereby promoting the separation of photo-generated charge carriers. Additionally, in-situ DRIFTS analysis revealed that the composite facilitated the conversion of intermediates into nitrates during the NO purification process. This work contributes valuable insights into designing and preparing of ternary heterojunction photocatalysts with dual carrier transport channels, advancing strategies for achieving superior photocatalytic performance.

Pb-N Chemically Anchors CsPbBr3 on 1D Porous Tubular g-C3N4 for Enhanced Photocatalytic CO2 Reduction.

Halide perovskite CsPbBr3 (CPB) quantum dots (QDs) are considered as a promising candidate for solar-driven CO2 conversion for their unique optoelectronic properties and suitable band structure. However, the CO2 conversion efficiency of pristine CsPbBr3 quantum dots is severely limited due to their rapid electron-hole pair recombination and insufficient active sites. In this study, by immobilizing CPB QDs onto one-dimensional (1D) porous tubular g-C3N4 (TCN), an effective 0D/1D CPB@TCN heterojunction photocatalyst for CO2 reduction is fabricated. Density functional theory (DFT) calculations combined with experimental studies demonstrate that CPB QDs are uniformly anchored on the surface of TCN through Pb-N chemical bonding, resulting in efficient separation and transfer of photogenerated carriers in CPB@TCN photocatalysts. The resultant CPB@TCN photocatalysts exhibit significantly enhanced photocatalytic activity for CO2 reduction with the highest conversion rate of 22.62 μmol·g-1·h-1, which is 5.33-times higher than that of pristine CPB QDs. This work unveils the interfacial bonding mechanism of CPB@TCN heterojunction through Pb-N chemical bond, which provides new insights for the development perovskite-based heterojunction photocatalysts.