Hemostatic Materials Research Articles

Calcium Ion-Coupled Polyphosphates with Different Degrees of Polymerization for Bleeding Control.

The development of efficient hemostatic materials is crucial for achieving rapid hemorrhage control and effective wound healing. Inorganic polyphosphate (polyP) is recognized as an effective modulator of the blood coagulation process. However, the specific effect of polyP chain length on coagulation is not yet fully understood. Furthermore, calcium ions (Ca2+) are essential for the coagulation process, promoting multiple enzyme-catalyzed reactions within the coagulation cascade. Hence, calcium ion-coupled polyphosphate powders with three different degrees of polymerization (CaPP-n, n = 20, 50, and 1500) are synthesized by an ion-exchange reaction. CaPP exhibits a crystalline phase at a low polymerization degree and transitions to an amorphous phase as the polymerization degree increases. Notably, the addition of Ca2+ enhances the wettability of polyP, and CaPP promotes hemostasis, with varying degrees of effectiveness related to chain length. CaPP-50 exhibits the most promising hemostatic performance, with the lowest blood clotting index (BCI, 12.1 ± 0.7%) and the shortest clotting time (302.0 ± 10.5 s). By combining Ca2+ with polyP of medium-chain length, CaPP-50 demonstrates an enhanced ability to accelerate the adhesion and activation of blood cells, initiate the intrinsic coagulation cascade, and form a stable blood clot, outperforming both CaPP-20 and CaPP-1500. The hemostatic efficacy of CaPP-50 is further validated using rat liver bleeding and femoral artery puncture models. CaPP-50 is proven to possess hemostatic properties comparable to those of commercial calcium-based zeolite hemostatic powder and superior to kaolin. In addition, CaPP-50 exhibits excellent biocompatibility and long-term storage stability. These results suggest that CaPP-50 has significant clinical and commercial potential as an active inorganic hemostatic agent for rapid control of bleeding.

Synthesis of hemostatic aerogel of TEMPO-oxidized cellulose nanofibers/collagen/chitosan and in vivo/vitro evaluation

The treatment of internal hemorrhage remains challenging due to the current limited antibacterial capability, hemostatic efficacy, and biocompatibility of hemostatic materials. The TEMPO-oxidized cellulose nanofibers/collagen/chitosan (TCNF/COL/CS) hemostatic aerogel was developed in this work by physically encasing COL in a sandwich structure and electrostatically self-assembling polyanionic TCNF with polycationic CS. In vitro coagulation experiments revealed the favorable procoagulant properties of TCNF/COL/CS along with high adhesion to erythrocytes and platelets. TCNF/COL/CS significantly increased the hemostatic efficacy by 59.8 % and decreased blood loss by 62.2 % in the liver injury model when compared to Surgicel®, the most frequently used hemostatic material. Furthermore, it demonstrated outstanding biodegradability both in vitro and in vivo, and a substantial increase in resistance (96.8 % against E. coli and 95.4 % against S. aureus) compared to TCNF. The significant hemostatic and biodegradable characteristics of TCNF/COL/CS can be ascribed to its interconnected porous structure, increased porosity, and efficient water absorption, along with the synergistic effect of the three constituents. The TCNF/COL/CS aerogel shows significant potential to control internal bleeding. A novel plant-derived nanocellulose composite aerogel has been described here for the first time; it has outstanding antibacterial characteristics, higher biocompatibility, and outstanding hemostatic characteristics in vivo.

A thermal cross-linking approach to developing a reinforced elastic chitosan cryogel for hemostatic management of heavy bleeding

Uncontrolled hemorrhage stands as the primary cause of potentially preventable deaths following traumatic injuries in both civilian and military populations. Addressing this critical medical need requires the development of a hemostatic material with rapid hemostatic performance and biosafety. This work describes the engineering of a chitosan-based cryogel construct using thermo-assisted cross-linking with α-ketoglutaric acid after freeze-drying. The resulting cryogel exhibited a highly interconnected macro-porous structure with low thermal conductivity, exceptional mechanical properties, and great fluid absorption capacity. Notably, assessments using rabbit whole blood in vitro, as well as rat liver volume defect and femoral artery injury models simulating severe bleeding, showed the remarkable hemostatic performance of the chitosan cryogel. Among the cryogel variants with different chitosan molecular weights, the 150 kDa one demonstrated superior hemostatic efficacy, reducing blood loss and hemostasis time by approximately 73 % and 63 % in the hepatic model, and by around 60 % and 68 %, in the femoral artery model. Additionally, comprehensive in vitro and in vivo evaluations underscored the good biocompatibility of the chitosan cryogel. Taken together, these results strongly indicate that the designed chitosan cryogel configuration holds significant potential as a safe and rapid hemostatic material for managing severe hemorrhage.

Hemostatic Gelatin-Alginate Hydrogels Modified with Humic Acids and Impregnated with Aminocaproic Acid

The work is devoted to the development of safe and biocompatible multicomponent gelatin-alginate hydrogels modified with humic acids (HA) and impregnated with the antifibrinolytic agent aminocaproic acid (АА).These hydrogels are designed to be effective hemostatic materials with anti-inflammatory properties and the ability to deliver in less than 30 seconds to deep and hidden areas of hemorrhages. Studies of the crystal structure by X-ray diffraction analysis and non-covalent interactions of molecules by Fourier transform infrared spectroscopy of the developed hemostatic gelatin-alginate hydrogels modified with bactericidal and anti-inflammatory humic acids made it possible to identify the optimal concentrations of HA from 2.5 wt.%. up to 5 wt.%. At such concentrations of HA, gelatin-alginate hydrogels have a semicrystalline structure. Due to non-covalent bonds between polymer chains, they are thermo-responsive with a gel-sol transition temperature of about 37 °C. Impregnation of these hydrogels with aminocaproic acid led to an almost threefold increase in their swelling, which facilitated the dissolution of AA in the hydrogels and its subsequent delivery to the wound. Experiments simulating the transmembrane transport of aminocaproic acid from the developed gelatin-alginate hydrogels confirmed their ability to rapidly deliver up to 494± 3 mg of AA from 5 ml of hydrogel to the wound.

Study on hemostatic and antibacterial properties of modified silicone rubber sponge

At present, gauze compression and hemostatic powder are commonly used in first aid to stop bleeding. However, the hemostatic effect of gauze compression is poor, and the hemostatic powder is easy to block blood vessels and causes thrombosis. Therefore, developing hemostatic materials with rapid hemostatic function and biosafety remains a challenge. In this article, a double layer hemostatic dressing based on silicone rubber (SR) was prepared. Among them, sponge layer was modified with polydopamine (PDA), and connected to the hydrophilic polymer polyvinylpyrrolidone (PVP) by strong hydrogen bonding. The synergistic synergy of the blood cell affinity of the catechol group and the water absorption of sponge enhanced the hemostatic ability. For the SR layer, ZnO was grown in situ by hydrothermal method as an antimicrobial layer (SRZ). SRZ/PDA-PVP dressing has good mechanical properties, antibacterial properties, coagulation ability and excellent biocompatibility, providing a new idea for the development of hemostatic materials.

Chitosan/β-glycerophosphate porous microsphere prepared by facile water-in-water emulsion as a topical hemostatic material

Acute hemorrhage is a major cause of death in many emergency cases. Although many hemostatic materials have been studied in recent years, it is still necessary to develop new hemostatic materials with remarkable efficiency, biosafety, convenient preparation, low cost, and good biodegradability. In this work, novel chitosan (CS)/β-glycerophosphate (β-GP) composite porous microsphere with a uniform size of 210.00 ± 2.14 μm was fabricated through water-in-water (W/W) emulsion via microencapsulation, which can avoid the use of toxic crosslink chemicals and organic solvents to achieve facile and efficient preparation of microspheres. β-GP could promote the formation of microspheres by enhancing the hydrogen-bonding interaction between CS chains, which contributed to the macro-porous structure. Owing to their large pore size (6.0 μm) and high specific surface area (37.8 m2/g), the CS/β-GP microspheres could absorb water quickly and adsorb protein, red blood cells, and platelets through electrostatic forces to promote blood coagulation. Furthermore, the CS/β-GP microspheres achieved a significantly shortened hemostatic time (45 s) and reduced blood loss (0.03 g) in a rat liver injury model. Rat tail amputation test also showed a satisfactory hemostatic effect. Overall, the green and porous CS/β-GP microspheres can be used as a facile and topical rapid hemostatic material.

Intelligent and biocompatible cellulose aerogels featured with high-elastic and fast-hemostatic for epistaxis and wound healing

Nasal tamponade is a commonly employed and highly effective treatment method for preventing nasal bleeding. However, the current nasal packing hemostatic materials exhibit some limitations, such as low hemostatic efficiency, the potential for causing secondary injury when removed from the nasal cavity, limited intelligence in their design, and an inability to promote the healing of nasal mucosa wounds. Herein, we report the fabrication of a smart cellulose aerogel through the covalent cross-linking of carboxymethyl cellulose (CMC) macromolecules, while incorporating one-dimensional cellulose nanofibers (CNF) and two-dimensional MXene as reinforcing network scaffolds and conductive fillers. The abundant hydrogen and ether bonds in aerogels make them possess high elasticity in both dry and wet states, which can be compressed 100 times at 90 % deformation with a stress loss of <10 % under water. The highly elastic aerogels can be filled into the narrow nasal passages, pressuring the capillaries and reducing the amount of bleeding. Moreover, the strong interface between aerogels and blood can promote red blood cell aggregation, platelet adhesion and activation, activate intrinsic coagulation pathway and accelerate blood coagulation, resulting in excellent hemostatic ability. Furthermore, the aerogels exhibit excellent hemocompatibility and cytocompatibility, making them suitable for wound healing and capable of fully healing wounds within 15 days. Notably, the presence of MXene causes the aerogels to form a conductive network when exposed to blood, enabling them to perform real-time hemostatic monitoring without removing the dressing. This innovative biomedical aerogel, prepared from natural materials, shows excellent potential for applications in rapid nasal hemostasis.

Engineering High-Performance Composite Cellulose Materials for Fast Hemostasis.

The development of an effective hemostatic agents is of vital importance for saving wounded individuals from uncontrolled hemorrhage, which is the main reason for preventable death after accidental injury. However, current high-performance hemostatic agents suffer from a cumbersome preparation procedures and poor biocompatibility. Here, we engineered a cellulosic-derived aerogel material by simply controlling the drying process of cellulose regeneration for fast hemostasis. Four different freeze-drying pretreatments were investigated. As compared with the other three, the cellulosic aerogel material prepared without freezing pretreatment exhibited the lowest crystallinity (21.3%) and the highest body fluid absorption capacity (20.3 times that of its own weight) due to its super hierarchical porous structure, which led to an excellent hemostatic performance in vitro blood coagulation (≈100 s). Moreover, the addition of gelatin and diatomite in the material could tune the functional groups and electrostatic properties of the aerogel and further enhance its hemostatic performance. Various characterizations, including X-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), X-ray nanocomputed tomography (CT), scanning electron microscopy (SEM), and zeta potential analysis, were carried out to probe the structure-function relationship of the prepared material, and its mechanism of fast hemostasis was thereafter revealed. The results indicate that the developed aerogel is a cost-effective and feasibly scalable hemostatic material suitable for practical use in industry.

Temperature- and pH-induced dual-crosslinked methylcellulose/chitosan-gallol conjugate composite hydrogels with improved mechanical, tissue adhesive, and hemostatic properties

Gauze or bandages are commonly used to effectively control bleeding during trauma and surgery. However, conventional treatment methods can sometimes lead to secondary damages. In recent years, there has been increased interest in developing adhesive hemostatic hydrogels as a safer alternative for achieving hemostasis. Methylcellulose (MC) is a well-known thermo-sensitive polymer with excellent biocompatibility that is capable of forming a hydrogel through physical crosslinking owing to its inherent thermo-reversible properties. However, the poor mechanical properties of the MC hydrogel comprising a single crosslinked network (SN) limit its application as a hemostatic material. To address this issue, we incorporated a chitosan-gallol (CS-GA) conjugate, which has the ability to form chemical crosslinks through self-crosslinking reactions under specific pH conditions, into the MC hydrogel to reinforce the MC hydrogel network. The resulting MC/CS-GA hydrogel with a dual-crosslinked network (DN), involving both physical and chemical crosslinks, exhibited synergistic effects of the two types of crosslinks. Thus, compared with those of the SN hydrogel, the composite DN hydrogel exhibited significantly enhanced mechanical strength and tissue adhesive properties. Moreover, the DN hydrogel presented excellent biological activity in vitro. Additionally, in rat hepatic hemorrhage models, the DN hydrogel exhibited high hemostatic efficiency, showcasing its multifunctional capabilities.

Protonated-chitosan sponge with procoagulation activity for hemostasis in coagulopathy

Hemostatic materials are essential for managing acute bleeding in medical settings. Chitosan (CS) shows promise in hemostasis but its underlying mechanism remains incompletely understood. We unexpectedly discovered that certain protonated-chitosan (PCS) rapidly assembled plasma proteins to form protein membrane (PM) upon contact with platelet-poor plasma (PPP). We hypothesized that the novel observation was intricately related to the procoagulant effect of chitosan. Herein, the study aimed to elucidate the conditions necessary and mechanism for PM formation, identify the proteins within the PM and PCS's procoagulant action at the molecule levels. We confirmed that the amount of –NH3+ groups (>4.9 mmol/g) on PCS molecules played a crucial role in promoting coagulation. The –NH3+ group interacted with blood's multiple active components to exert hemostatic effects: assembling plasma proteins including coagulation factors such as FII, FV, FX, activating blood cells and promoting the secretion of coagulation-related substances (FV, ADP, etc) by platelets. Notably, the hemostatic mechanism can be extended to protonated-chitosan derivatives like quaternized, alkylated, and catechol-chitosan. In the blood clotting index (BCI) experiment, compared to other groups, PCS95 achieved the lowest BCI value (∼6 %) within 30 s. Protonated-chitosan exhibited excellent biocompatibility and antibacterial properties, with PCS95 demonstrating inhibition effectiveness of over 95 % against Escherichia coli (E.coil) and Staphylococcus aureus (S. aureus). Moreover, PCS performed enhanced hemostatic effectiveness over chitosan-based commercially agents (Celox™ and ChitoGauze®XR) in diverse bleeding models. In particular, PCS95 reduced bleeding time by 70 % in rabbit models of coagulopathy. Overall, this study investigated the coagulation mechanism of materials at the molecular level, paving the way for innovative approaches in designing new hemostatic materials.

Tannic acid coating gauze immobilized with thrombin with ultra-high coagulation activity and antimicrobial property for uncontrollable hemorrhage

Rapid and safe hemostasis is crucial for the survival of bleeding patients in prehospital care. It is urgent to develop high performance hemostatic material to control the massive hemorrhage in the military field and accidental trauma. In this work, an efficient protein hemostat of thrombin was immobilized onto commercial gauze, which was mediated by self-polymerization and anchoring of tannic acid (TA). Through TA treatment, the efficient immobilization of thrombin was achieved, preserving both the biological activity of thrombin and the physical properties of the dressing, including absorbency, breathability, and mechanical performance. Moreover, in the presence of TA coating and thrombin, Gau@TA/Thr could obviously shortened clotting time and enriched blood components such as plasma proteins, platelets, and red blood cells, thereby exhibiting an enhanced in vitro coagulation effect. In SD rat liver volume defect and artery transection hemorrhage models, Gau@TA/Thr still had outstanding hemostatic performance. Besides, the Gau@TA/Thr gauze had inherent antibacterial property and demonstrated excellent biocompatibility. All results suggested that Gau@TA/Thr would be a potential candidate for treating uncontrollable hemorrhage in prehospital care.

Surface-modified, zinc-incorporated mesoporous silica nanoparticles with improved antibacterial and rapid hemostatic properties

Severe bleeding and bacterial infections pose significant challenges to the global public health. Effective hemostatic materials have the potential to be used for rapid control of bleeding at the wound site. In this study, mesoporous silica nanoparticles (MSN) were doped with zinc ions (MSN@Zn) and subsequently functionalized with carboxyl (-COOH) groups through post-grafting, resulting in (MSN@Zn-COOH). The results demonstrated the successful functionalization of carboxyl groups on the surface of MSN@Zn mesoporous materials with minimal impact on the morphology. The released zinc ions showed potent antibacterial activity (above ∼80 %) against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). In vitro and in vivo assessments of MSN@Zn-COOH revealed excellent hemostatic effects and favorable blood compatibility. Hemolysis percentages associated with MSN@Zn-COOH exhibited noteworthy reductions in comparison to MSN. Furthermore, a decrease in APTT (a test evaluating the intrinsic coagulation pathway) of modified MSN@Zn indicated enhanced hemostasis, supported by their negative zeta potential (∼ –14 to –43 mV). Importantly, all samples showed no cytotoxicity. This work underscores the potential of MSN@Zn-COOH, with its combined hemostatic performance and antibacterial activity, for emergency clinical applications.

Spring coil displacement after interventional embolization of severe pelvic fracture: a case report.

Haemorrhagic shock, which arises as a complication of pelvic fracture subsequent to severe trauma, represents a perilous state. The utilization of interventional endovascular haemostasis assumes a pivotal role in the management of patients with vascular injury following pelvic fracture. This article reports the treatment of a patient with pelvic fracture caused by a serious work-related vehicle accident. Despite the implementation of timely blood and fluid transfusion to combat shock, the application of aortic balloon obstruction, and interventional iliac artery embolization for haemostasis, the patient's condition failed to display any discernible improvement. Repeat angiography further revealed a displacement of the interventional embolization material, and the patient subsequently died of multiple organ failure. The occurrence of spring coil displacement is infrequent, but the consequences thereof are considered grave, necessitating meticulous discernment in the selection of haemostatic materials for this type of patient. The diagnostic and therapeutic processes encompassing the particular case described here were analysed and are discussed with the objective of augmenting the efficacy and success rate of treatment modalities for patients in similar circumstances.

NanoGraphene Clot: A New Fibrinogen-Mimic Hemostatic Material.

Trauma is the leading cause of death for adults under the age of 44. Internal bleeding remains a significant challenge in medical emergencies, necessitating the development of effective hemostatic materials that could be administered by paramedics before a patient is in the hospital and treated by surgeons. In this study, we introduce a graphene oxide (GO)-based PEGylated synthetic hemostatic nanomaterial with an average size of 211 ± 83 nm designed to target internal bleeding by mimicking the role of fibrinogen. Functionalization of GO-g-PEG with peptides derived from the α-chain of fibrinogen, such as GRGDS, or the γ-chain of fibrinogen, such as HHLGGAKQAGDV:H12, was achieved with peptide loadings of 72 ± 6 and 68 ± 15 μM, respectively. In vitro studies with platelet-rich plasma (PRP) under confinement demonstrated aggregation enhancement of 39 and 24% for GO-g-PEG-GRGDS and GO-g-PEG-H12, respectively, compared to buffer, while adenosine diphosphate (ADP) alone induced a 5% aggregation. Compared to the same materials in the absence of ADP, GO-g-PEG-GRGDS achieved a 47% aggregation enhancement, while GO-g-PEG-H12 a 25% enhancement. This is particularly important for injectable hemostats and highlights the fact that our nanographene-based materials can only act as hemostats in the presence of agonists, reducing the possibility of unwanted clotting during circulation. Further studies on collagen-coated wells under dynamic flow revealed statistically significant augmentation of PRP fluorescence signal using GRGDS- or H12-coated GO-g-PEG compared to controls. Hemolysis studies showed <1% lysis of red blood cells (RBCs) at the highest PEGylated nanographene concentration. Finally, whole human blood coagulation studies reveal faster and more pronounced clotting using our nanohemostats vs PBS control from 3 min and below (blood is clotted with 10% CaCl2 within 4-5 min), with the biggest differences to be shown at 2 and 1 min. At 1 min, the clot weight was found to be ∼45% of that between 4 and 5 min, while no clot was formed in PBS-treated blood. Reduction of CaCl2 to 5 and 3%, or utilization of prostaglandin E1, an anticoagulant, still leads to clots but of smaller weight. The findings highlight the potential of our fibrinogen-mimic PEGylated nanographene as a promising non-hemolytic injectable scaffold for targeting internal bleeding, offering insights into its platelet aggregation capabilities under confinement and under dynamic flow as well as its pronounced coagulation abilities.

Low-temperature plasma-treated polyethylene oxide for hemostasis and skin wound healing

The development of a hemostatic material capable of controlling substantial blood loss in wound healing scenarios remains a critical challenge in clinical practice. Herein, we treated polyethylene oxide (PEO) with low-temperature plasma irradiation (LTPI) technology in the air, and the modified PEO (CAPEO) was obtained with carboxyl (–COOH) and amine (–NH2) groups. Notably, CAPEO exhibited excellent hydrophilicity, great cytocompatibility, and blood compatibility. Platelets could be activated more and clotting time could be shorter with the treatment of CAPEO than with PEO. More importantly, in the rat liver hemorrhage model, the blood loss in CAPEO (95.8 mg) was less than in PEO (144.2 mg). Moreover, in vivo investigation of skin wound repair, CAPEO could promote epidermal regeneration and collagen deposition, thereby accelerating wound healing. These findings disclose that CAPEO holds great potential for hemostasis and wound healing.

Insight into hemostatic performance and mechanism of natural mixed-dimensional Attapulgite clay

Clay minerals have attracted wide attention as biomedical materials due to the unique crystal structure, abundant morphology and good biocompatibility. However, the relevant studies on the abundant natural mixed clay deposits were scarcely reported. Herein, the hemostatic performance of natural mixed-dimensional attapulgite clay (MDAPT) composed of one-dimensional attapulgite and multiple two-dimensional clay were systematically investigated based on the structural evolution using oxalic acid for different time. The results of hemostatic evaluation showed that MDAPT leached by oxalic acid with 1 h presented the shortest clotting time (134 ± 12.17 s), a 15.09 % and 41.74 % reduction of relative hemoglobin absorbance at 180 s and 120 s when compared with the control group, respectively, and an increase of 19.45 % of the blood clotting index in vitro, as well as MDAPT obtained the shortest bleeding time (158.5 ± 6.9 s), nearly 66 % and 31 % reduction blood loss as compared to the blank group and the YNBY group in vivo. This improvement was primarily ascribed to the synergistic effect of lamellar non-expandable illite, and nano rod-like attapulgite. Furthermore, the rapid hemostasis of MDAPT was also due to the joint effect of superhydrophobic property toward blood, minimizing blood loss, surface negative charge, metal ions from MDAPT structural skeleton, promoting an average increase of 21 % for platelet activation. The results suggested that MDAPT could be served as a promising efficient inorganic hemostatic materials, which provided a feasible strategy to realize the high-valued utilization of natural mixed clay resources.

Fabrication and hemostasis evaluation of a carboxymethyl chitosan/sodium alginate/Resina Draconis composite sponge

Hemostasis is the first step of emergency medical treatment. It is particularly important to develop rapid-acting and efficacious hemostatic materials. Carboxymethyl chitosan (CMCS), sodium alginate (SA) and Resina Draconis (RD) were composited uniformly by polyelectrolyte blending. Their composite sponges (CMCS/SA/RD) were prepared by freeze-induced phase separation. CMCS/SA/RD sponges were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy, and their blood absorption and hemolysis ratio were analyzed. The hemostatic effect of the composite sponges was evaluated by coagulation in vitro and in vivo. The composite sponges had a porous network structure. The water absorption ratio was >8000 %, and hemolysis ratio was <5 %. CMCS/SA/RD-II and CMCS/SA/RD-III composite sponges shortened the coagulation time in vitro by 11.33 s and 9.66 s, the hepatic hemostasis time by 13.8 % and 23.3 %, and the hemostasis time after mouse-tail amputation by 28.9 % and 23.9 %, respectively. A preliminary study on its coagulation mechanism showed that CMCS/SA/RD had significant effects on erythrocyte adsorption, platelet adhesion, and shortening of the activated partial thromboplastin time.

Design of chitosan-based drug-loaded laminated materials with superhydrophilic/superhydrophobic properties for simultaneous effective hemostasis and antiadhesion

Hemostatic materials play a crucial role in trauma medicine. However, existing materials have poor hemostatic efficacy and a tendency to adhere to the wound surface, limiting their clinical effectiveness. Herein, a drug-loaded, superhydrophilic/superhydrophobic laminated material (DSLM), consisting of a superhydrophobic inner layer with a micropore array, a superhydrophilic chitosan-based sponge layer loaded with hemostatic/antimicrobial drugs, and a superhydrophobic outer layer, was developed. Furthermore, the DSLM allows unidirectional flow of blood and exudates from the wound bed through the superhydrophobic inner layer while facilitating efficient drug delivery. In addition, it possesses excellent biocompatibility and antiadhesion properties, as confirmed by in vivo and in vitro experiments. Compared with traditional hemostatic materials, the DSLM remarkably increased the survival time by over threefold in the acute femoral transaction wound bleeding model, and simultaneously prevented secondary wound damage by reducing peeling force to one-eighth incomparison to pristine gauze. The DSLM holds promise as a versatile clinical biomaterial for prehospital acute trauma treatment, with its simple structure facilitating manufacturing and expanding applications in biomedicine.

Plasma Surface Treatment and Application of Polyvinyl Alcohol/Polylactic Acid Electrospun Fibrous Hemostatic Membrane

In this study, an improved PVA/PLA fibrous hemostatic membrane was prepared by electrospinning technology combined with air plasma modification. The plasma treatment was used to modify PLA to enhance the interlayer bonding between the PVA and PLA fibrous membranes first, then modify the PVA to improve the hemostatic capacity. The surfaces of the PLA and PVA were oxidized after air plasma treatment, the fibrous diameter was reduced, and roughness was increased. Plasma treatment enhanced the interfacial bond strength of PLA/PVA composite fibrous membrane, and PLA acted as a good mechanical support. Plasma-treated PVA/PLA composite membranes showed an increasing liquid-enrichment capacity of 350% and shortened the coagulation time to 258 s. The hemostatic model of the liver showed that the hemostatic ability of plasma-treated PVA/PLA composite membranes was enhanced by 79% compared to untreated PVA membranes, with a slight improvement over commercially available collagen. The results showed that the plasma-treated PVA/PLA fibers were able to achieve more effective hemostasis, which provides a new strategy for improving the hemostatic performance of hemostatic materials.

Facile Synthesis of Multifunctional Mesoporous Starch-Based Microparticle for Effective Hemostasis and Wound Healing.

Uncontrolled hemorrhage and infection are the principal causes of mortality associated with trauma in both military and civilian medical settings. Modified starch granules have emerged as a safe hemostatic agent for irregular and noncompressible wounds, but their performance is constrained by limited hemostasis efficiency and modest antibacterial activity. This study reported a directed self-assembly approach for a multifunctional mesoporous starch-based microparticle loaded with chitosan and calcium ions (Ca@MSMP) used for rapid hemostasis and wound healing. Directed self-assembly of uniform Ca@MSMP with a hierarchical hollow structure in the presence of chitosan was confirmed by scanning electron microscopy (SEM) analysis and pore structure analysis. The resulting Ca@MSMP exhibited a well-defined spherical shape and uniform size of 1 μm and demonstrated excellent antibacterial activity (>95%) without hemolytic activity. Importantly, Ca@MSMP enhanced blood coagulation and platelet aggregation via the synergistic effect of rapid calcium release and chitosan-mediated electrostatic interactions, leading to a significant decrease in blood loss and reduction in hemostasis time in rat tail amputation and liver injury models. In comparative analyses, Ca@MSMP significantly outperformed the commercial hemostatic agent Quickclean, notably enhancing the healing of full-thickness skin wounds in vivo by effectively preventing infection. These results underscore the potential of this innovative hemostatic material in diverse clinical scenarios, offering effective solutions for the management of bleeding in wounds that are irregularly shaped and noncompressible.