Helicase Loading Research Articles

Amidst multiple binding orientations on fork DNA, Saccharolobus MCM helicase proceeds N-first for unwinding.

DNA replication requires that the duplex genomic DNA strands be separated; a function that is implemented by ring-shaped hexameric helicases in all Domains. Helicases are composed of two domains, an N- terminal DNA binding domain (NTD) and a C- terminal motor domain (CTD). Replication is controlled by loading of helicases at origins of replication, activation to preferentially encircle one strand, and then translocation to begin separation of the two strands. Using a combination of site-specific DNA footprinting, single-turnover unwinding assays, and unique fluorescence translocation monitoring, we have been able to quantify the binding distribution and the translocation orientation of Saccharolobus (formally Sulfolobus) solfataricus MCM on DNA. Our results show that both the DNA substrate and the C-terminal winged-helix (WH) domain influence the orientation but that translocation on DNA proceeds N-first.

The Many Roles of Binding Cooperativity in the Control of DNA Replication

The Many Roles of Binding Cooperativity in the Control of DNA Replication

GRWD1 directly interacts with p53 and negatively regulates p53 transcriptional activity.

Glutamate-rich WD40 repeat containing 1 (GRWD1) functions as a histone chaperone to promote loading of the MCM replication helicase at replication origins. GRWD1 is overexpressed in several cancer cell lines, and GRWD1 overexpression confers tumorigenic potential in human cells. However, less is known concerning its oncogenic activity. Our previous analysis showed that GRWD1 negatively regulates the tumour suppressor p53 via the RPL11-MDM2-p53 and RPL23-MDM2-p53 axes. Here, we demonstrate that GRWD1 directly interacts with p53 via the p53 DNA-binding domain. Upon DNA damage, GRWD1 downregulation resulted in increased p21 expression. Conversely, GRWD1 co-expression suppressed several p53-regulated promoters. GRWD1 interacted with the p21 and MDM2 promoters, and these interactions required p53. By using the Human Cancer Genome Atlas database, we found that GRWD1 expression levels are inversely correlated with the expression levels of some p53-target genes. Interestingly, high GRWD1 expression in combination with low expression levels of some p53-target genes was significantly correlated with poor prognosis in skin melanoma patients with wild-type p53. Taken together, our findings suggest a novel oncogenic function of GRWD1 as a transcriptional regulator of p53 and that GRWD1 might be an attractive therapeutic target and prognostic marker in cancer therapy.

Changing Perspectives on the Role of DnaA-ATP in Orisome Function and Timing Regulation.

Bacteria, like all cells, must precisely duplicate their genomes before they divide. Regulation of this critical process focuses on forming a pre-replicative nucleoprotein complex, termed the orisome. Orisomes perform two essential mechanical tasks that configure the unique chromosomal replication origin, oriC to start a new round of chromosome replication: (1) unwinding origin DNA and (2) assisting with loading of the replicative DNA helicase on exposed single strands. In Escherichia coli, a necessary orisome component is the ATP-bound form of the bacterial initiator protein, DnaA. DnaA-ATP differs from DnaA-ADP in its ability to oligomerize into helical filaments, and in its ability to access a subset of low affinity recognition sites in the E. coli replication origin. The helical filaments have been proposed to play a role in both of the key mechanical tasks, but recent studies raise new questions about whether they are mandatory for orisome activity. It was recently shown that a version of E. coli oriC (oriCallADP), whose multiple low affinity DnaA recognition sites bind DnaA-ATP and DnaA-ADP similarly, was fully occupied and unwound by DnaA-ADP in vitro, and in vivo suppressed the lethality of DnaA mutants defective in ATP binding and ATP-specific oligomerization. However, despite their functional equivalency, orisomes assembled on oriCallADP were unable to trigger chromosome replication at the correct cell cycle time and displayed a hyper-initiation phenotype. Here we present a new perspective on DnaA-ATP, and suggest that in E. coli, DnaA-ATP is not required for mechanical functions, but rather is needed for site recognition and occupation, so that initiation timing is coupled to DnaA-ATP levels. We also discuss how other bacterial types may utilize DnaA-ATP and DnaA-ADP, and whether the high diversity of replication origins in the bacterial world reflects different regulatory strategies for how DnaA-ATP is used to control orisome assembly.

Control of homologous recombination by the HROB-MCM8-MCM9 pathway.

DNA repair by homologous recombination (HR) is essential for genomic integrity, tumor suppression, and the formation of gametes. HR uses DNA synthesis to repair lesions such as DNA double-strand breaks and stalled DNA replication forks, but despite having a good understanding of the steps leading to homology search and strand invasion, we know much less of the mechanisms that establish recombination-associated DNA polymerization. Here, we report that C17orf53/HROB is an OB-fold-containing factor involved in HR that acts by recruiting the MCM8-MCM9 helicase to sites of DNA damage to promote DNA synthesis. Mice with targeted mutations in Hrob are infertile due to depletion of germ cells and display phenotypes consistent with a prophase I meiotic arrest. The HROB-MCM8-MCM9 pathway acts redundantly with the HELQ helicase, and cells lacking both HROB and HELQ have severely impaired HR, suggesting that they underpin two major routes for the completion of HR downstream from RAD51. The function of HROB in HR is reminiscent of that of gp59, which acts as the replicative helicase loader during bacteriophage T4 recombination-dependent DNA replication. We therefore propose that the loading of MCM8-MCM9 by HROB may similarly be a key step in the establishment of mammalian recombination-associated DNA synthesis.

MTOR Signaling Upregulates CDC6 via Suppressing miR-3178 and Promotes the Loading of DNA Replication Helicase

mTOR signaling pathway is deregulated in most cancers and uncontrolled cell cycle progression is a hallmark of cancer cell. However, the precise molecular mechanisms of the regulation of DNA replication and chromatin metabolism by mTOR signaling are largely unknown. We herein report that mTOR signaling promotes the loading of MCM2-7 helicase onto chromatin and upregulates DNA replication licensing factor CDC6. Pharmacological inhibition of mTOR kinase resulted in CHK1 checkpoint activation and decreased MCM2-7 replication helicase and PCNA associated with chromatins. Further pharmacological and genetic studies demonstrated CDC6 is positively controlled by mTORC1-S6K1 and mTORC2 signaling. miRNA screening revealed mTOR signaling suppresses miR-3178 thereby upregulating CDC6. Analysis of TCGA data found that CDC6 is overexpressed in most cancers and associates with the poor survival of cancer patients. Our findings suggest that mTOR signaling may control DNA replication origin licensing and replisome stability thereby cell cycle progression through CDC6 regulation.

Identification of a basal system for unwinding a bacterial chromosome origin

Genome duplication is essential for cell proliferation, and DNA synthesis is generally initiated by dedicated replication proteins at specific loci termed origins. In bacteria, the master initiator DnaA binds the chromosome origin (oriC) and unwinds the DNA duplex to permit helicase loading. However, despite decades of research it remained unclear how the information encoded within oriC guides DnaA‐dependent strand separation. To address this fundamental question, we took a systematic genetic approach in vivo and identified the core set of essential sequence elements within the Bacillus subtilis chromosome origin unwinding region. Using this information, we then show in vitro that the minimal replication origin sequence elements are necessary and sufficient to promote the mechanical functions of DNA duplex unwinding by DnaA. Because the basal DNA unwinding system characterized here appears to be conserved throughout the bacterial domain, this discovery provides a framework for understanding oriC architecture, activity, regulation and diversity.

Acinetobacter and Moraxella OriCs are Functional as Chromosomal Replication Origin Transplants in E. coli

Bacterial chromosome replication is triggered by the initiator protein, DnaA, which assembles into a multimeric complex (orisome) that unwinds the replication origin, oriC, and helps to load the replicative DNA helicase. DnaA is highly conserved and the oriCs from nearly all bacteria carry clusters of oriC‐encoded DnaA recognition sites that guide step‐wise and properly timed orisome assembly. However, the arrangement of these sites is widely divergent among bacterial types and prior studies show that heterologous oriCs are only functional in extremely close relatives with nearly identical origin nucleotide sequence. To investigate the basis for DnaA recognition site diversity and possibly identify shared steps in orisome assembly, we replaced E. coli's chromosomal oriC with heterologous donor oriCs from its distant Gammaproteobacterial relatives and measured replication activity in vivo. Despite carrying little sequence similarity to the host, oriCs from Acinetobacter baylyi (ADP1) and Moraxella catarrhalis (ATCC 25240) were active in E. coli and used alternative pathways to assemble E. coli DnaA into functional orisomes. Mapping studies revealed the transplanted oriCs lacked the distinctive DNA unwinding element comprising 13mer repeat motifs as well as the arrayed low affinity DnaA recognition sites that are both hallmarks of E. coli oriC. Using flow cytometry analysis, we found that ADP1 and M. catarrhalis oriCs were also unable to initiate DNA synthesis at the proper cell cycle time in their E. coli hosts. Thus, the mechanisms for initiation timing must be distinct from those that permit replication fork assembly on these origins. We propose that E. coli and ADP1‐type orisomes share a sub‐architecture required for mechanical function (unwinding and helicase loading), but also carry type‐specific variations in the arrangement and affinity of DnaA recognition sites that are required for proper initiation timing using their cognate DnaAs. We propose that replication origin diversity reflects the many varieties of cell cycle‐coupled regulatory mechanisms used to control the availability/accessibility of DnaA at the oriCs of different bacterial types. Further studies of DnaA‐oriC interactions on heterologous origins may also reveal novel targets for broad spectrum bacterial growth inhibitors as well as those for type‐specific inhibition.Support or Funding InformationNational Institutes of Health (GM54042 to AL) and Florida Institute of Technology Holzer Lequear Fund for Molecular Genetics (to JG).This abstract is from the Experimental Biology 2019 Meeting. There is no full text article associated with this abstract published in The FASEB Journal.

Mutational Analysis of DnaA‐trio Motifs in E. coli OriC Reveals Multiple Modes for Bacterial Replication Origin Activation

The chromosomal replication origin (oriC) in bacteria is a unique region that directs assembly of the orisome, a nucleoprotein complex that unwinds origin DNA and assists with the loading of the replicative helicase. All orisome functions are mediated by the initiator protein, DnaA, which binds to specific sites in oriC, and, after DNA unwinding, binds to and stabilizes the unwound region. Orisome assembly is well characterized in E. coli, but bacterial origins are not conserved with regard to the number and spacing of DnaA recognition sites, and so it is difficult to determine whether there are common sequence patterns that are essential for origin activity. However, one promising feature, the “DnaA‐trio” motif, can be found in the origins of most bacterial types, with multiple copies residing near the AT‐rich region where DNA strand separation takes place. DnaA‐trios are essential for B. subtilis chromosome replication initiation, where they facilitate delivery of DnaA‐ATP oligomeric filaments to the AT‐rich region. Three DnaA‐trio motifs also reside in E. coli oriC, but their role is unclear, since we recently reported that E. coli oriC could be activated without formation of DnaA‐ATP oligomers. Therefore, to test their essentiality in E. coli, we used site‐directed mutagenesis to inactivate the trios, and then used recombineering to replace wild type chromosomal oriC with the mutated versions. Eliminating trio sites had no effect on E. coli oriC activity or initiation timing. Based on these results, we hypothesized that E. coli might use an alternative mechanism to deliver DnaA to the AT‐rich region, one that does not depend on trios or DnaA‐ATP filaments. We hypothesized that the sharp DNA bend formed late in E. coli orisome assembly and stabilized by the DNA bending protein IHF, might eliminate the need for trio sites by positioning the AT‐rich region for cross‐strand DnaA donations provided by the DnaA bound to oriC's left half. To test this, we removed the bend region from oriC using site‐directed mutagenesis, and even though the mutated origin (oriCno bend) contained all three DnaA trios, it was unable to function as the sole chromosomal origin of replication. In vitro unwinding studies suggested that the defect could be caused by a failure to deliver DnaA to the AT‐rich region, so we tried to rescue oriCno bend function by activating a trio‐dependent mode of DnaA delivery. Successful rescue was achieved by inserting a DnaA binding site between R1 and the trio sites, and origin activity became completely dependent on the DnaA‐trio elements. However, rescued cells displayed perturbed initiation timing, suggesting that the bend mode of DnaA delivery plays both mechanical and regulatory roles in E. coli. We propose that there are at least two possible modes of bacterial origin activation; one that depends on DnaA‐trio elements, and one that uses DNA bending and cross‐strand DnaA binding to regulate late stage orisome assembly.Support or Funding InformationNational Institutes of Health (GM54042 to A.L.) and Florida Institute of Technology Holzer Lequear Fund for Molecular Genetics (to J.G.)This abstract is from the Experimental Biology 2019 Meeting. There is no full text article associated with this abstract published in The FASEB Journal.

Physical Basis for the Loading of a Bacterial Replicative Helicase onto DNA

In cells, dedicated AAA+ ATPases deposit hexameric, ring-shaped helicases onto DNA to initiate chromosomal replication. To better understand the mechanisms by which helicase loading can occur, we used cryo-EM to determine sub-4-Å-resolution structures of the E.coli DnaB⋅DnaC helicase⋅loader complex with nucleotide in pre- and post-DNA engagement states. In the absence of DNA, six DnaC protomers latch onto and crack open a DnaB hexamer using an extended N-terminal domain, stabilizing this conformation through nucleotide-dependent ATPase interactions. Upon binding DNA, DnaC hydrolyzes ATP, allowing DnaB to isomerize into a topologically closed, pre-translocation state competent to bind primase. Our data show how DnaC opens the DnaB ring and represses the helicase prior to DNA binding and how DnaC ATPase activity is reciprocally regulated by DnaB and DNA. Comparative analyses reveal how the helicase loading mechanism of DnaC parallels and diverges from homologous AAA+ systems involved in DNA replication and transposition.

Mechanisms of opening and closing of the bacterial replicative helicase.

Assembly of bacterial ring-shaped hexameric replicative helicases on single-stranded (ss) DNA requires specialized loading factors. However, mechanisms implemented by these factors during opening and closing of the helicase, which enable and restrict access to an internal chamber, are not known. Here, we investigate these mechanisms in the Escherichia coli DnaB helicase•bacteriophage λ helicase loader (λP) complex. We show that five copies of λP bind at DnaB subunit interfaces and reconfigure the helicase into an open spiral conformation that is intermediate to previously observed closed ring and closed spiral forms; reconfiguration also produces openings large enough to admit ssDNA into the inner chamber. The helicase is also observed in a restrained inactive configuration that poises it to close on activating signal, and transition to the translocation state. Our findings provide insights into helicase opening, delivery to the origin and ssDNA entry, and closing in preparation for translocation.

Cryptic protein interactions regulate DNA replication initiation.

DNA replication is a fundamental biological process that is tightly regulated in all cells. In bacteria, DnaA controls when and where replication begins by building a step-wise complex that loads the replicative helicase onto chromosomal DNA. In many low-GC Gram-positive species, DnaA recruits the DnaD and DnaB proteins to function as adaptors to assist in helicase loading. How DnaA, its adaptors and the helicase form a complex at the origin is unclear. We addressed this question using the bacterial two-hybrid assay to determine how the initiation proteins from Bacillus subtilis interact with each other. We show that cryptic interaction sites play a key role in this process and we map these regions for the entire pathway. In addition, we found that the SirA regulator that blocks initiation in sporulating cells binds to a surface on DnaA that overlaps with DnaD. The interaction between DnaA and DnaD was also mapped to the same DnaA surface in the human pathogen Staphylococcus aureus, demonstrating the broad conservation of this surface. Therefore, our study has unveiled key protein interactions essential for initiation and our approach is widely applicable for mapping interactions in other signaling pathways that are governed by cryptic binding surfaces.

The DnaA AAA+ Domain His136 Residue Directs DnaB Replicative Helicase to the Unwound Region of the Replication Origin, oriC.

Chromosomal replication initiation requires dynamic mechanisms in higher-order nucleoprotein complexes that are constructed at the origin of replication. In Escherichia coli, DnaA molecules construct functional oligomers at the origin oriC, enabling localized unwinding of oriC and stable binding of DnaB helicases via multiple domain I molecules of oriC-bound DnaA. DnaA-bound DnaB helicases are then loaded onto the unwound region of oriC for construction of a pair of replisomes for bidirectional replication. However, mechanisms of DnaB loading to the unwound oriC remain largely elusive. In this study, we determined that His136 of DnaA domain III has an important role in loading of DnaB helicases onto the unwound oriC. DnaA H136A mutant protein was impaired in replication initiation in vivo, and in DnaB loading to the unwound oriC in vitro, whereas the protein fully sustained activities for oriC unwinding and DnaA domain I-dependent stable binding between DnaA and DnaB. Functional and structural analyses supported the idea that transient weak interactions between DnaB helicase and DnaA His136 within specific protomers of DnaA oligomers direct DnaB to a region in close proximity to single stranded DNA at unwound oriC bound to DnaA domain III of the DnaA oligomer. The aromatic moiety of His136 is basically conserved at corresponding residues of eubacterial DnaA orthologs, implying that the guidance function of DnaB is common to all eubacterial species.

Structure of the origin recognition complex bound to DNA replication origin.

The six-subunit origin recognition complex (ORC) binds to DNA to mark the site for the initiation of replication in eukaryotes. Here we report a 3Å cryo-electron microscopy structure of the Saccharomyces cerevisiae ORC bound to a 72-base-pair origin DNA sequence that contains the ARS consensus sequence (ACS) and the B1 element. The ORC encircles DNA through extensive interactions with both phosphate backbone and bases, and bends DNA at the ACS and B1 sites. Specific recognition of thymine residues in the ACS is carried out by a conserved basic amino acid motif of Orc1 in the minor groove, and by a species-specific helical insertion motif of Orc4 in the major groove. Moreover, similar insertions into major and minor grooves are also embedded in the B1 site by basic patch motifs from Orc2 and Orc5, respectively, to contact bases and to bend DNA. This work pinpoints a conserved role of ORC in modulating DNA structure to facilitate origin selection and helicase loading in eukaryotes.

Replication Fork Breakage and Restart in Escherichia coli

In all organisms, replication impairments are an important source of genome rearrangements, mainly because of the formation of double-stranded DNA (dsDNA) ends at inactivated replication forks. Three reactions for the formation of dsDNA ends at replication forks were originally described for Escherichia coli and became seminal models for all organisms: the encounter of replication forks with preexisting single-stranded DNA (ssDNA) interruptions, replication fork reversal, and head-to-tail collisions of successive replication rounds. Here, we first review the experimental evidence that now allows us to know when, where, and how these three different reactions occur in E. coli. Next, we recall our recent studies showing that in wild-type E. coli, spontaneous replication fork breakage occurs in 18% of cells at each generation. We propose that it results from the replication of preexisting nicks or gaps, since it does not involve replication fork reversal or head-to-tail fork collisions. In the recB mutant, deficient for double-strand break (DSB) repair, fork breakage triggers DSBs in the chromosome terminus during cell division, a reaction that is heritable for several generations. Finally, we recapitulate several observations suggesting that restart from intact inactivated replication forks and restart from recombination intermediates require different sets of enzymatic activities. The finding that 18% of cells suffer replication fork breakage suggests that DNA remains intact at most inactivated forks. Similarly, only 18% of cells need the helicase loader for replication restart, which leads us to speculate that the replicative helicase remains on DNA at intact inactivated replication forks and is reactivated by the replication restart proteins.

Multiple kinases inhibit origin licensing and helicase activation to ensure reductive cell division during meiosis.

Meiotic cells undergo a single round of DNA replication followed by two rounds of chromosome segregation (the meiotic divisions) to produce haploid gametes. Both DNA replication and chromosome segregation are similarly regulated by CDK oscillations in mitotic cells. Yet how these two events are uncoupled between the meiotic divisions is unclear. Using Saccharomyces cerevisiae, we show that meiotic cells inhibit both helicase loading and helicase activation to prevent DNA replication between the meiotic divisions. CDK and the meiosis-specific kinase Ime2 cooperatively inhibit helicase loading, and their simultaneous inhibition allows inappropriate helicase reloading. Further analysis uncovered two previously unknown mechanisms by which Ime2 inhibits helicase loading. Finally, we show that CDK and the polo-like kinase Cdc5 trigger degradation of Sld2, an essential helicase-activation protein. Together, our data demonstrate that multiple kinases inhibit both helicase loading and activation between the meiotic divisions, thereby ensuring reductive cell division.

The DnaA Cycle in Escherichia coli: Activation, Function and Inactivation of the Initiator Protein.

This review summarizes the mechanisms of the initiator protein DnaA in replication initiation and its regulation in Escherichia coli. The chromosomal origin (oriC) DNA is unwound by the replication initiation complex to allow loading of DnaB helicases and replisome formation. The initiation complex consists of the DnaA protein, DnaA-initiator-associating protein DiaA, integration host factor (IHF), and oriC, which contains a duplex-unwinding element (DUE) and a DnaA-oligomerization region (DOR) containing DnaA-binding sites (DnaA boxes) and a single IHF-binding site that induces sharp DNA bending. DiaA binds to DnaA and stimulates DnaA assembly at the DOR. DnaA binds tightly to ATP and ADP. ATP-DnaA constructs functionally different sub-complexes at DOR, and the DUE-proximal DnaA sub-complex contains IHF and promotes DUE unwinding. The first part of this review presents the structures and mechanisms of oriC-DnaA complexes involved in the regulation of replication initiation. During the cell cycle, the level of ATP-DnaA level, the active form for initiation, is strictly regulated by multiple systems, resulting in timely replication initiation. After initiation, regulatory inactivation of DnaA (RIDA) intervenes to reduce ATP-DnaA level by hydrolyzing the DnaA-bound ATP to ADP to yield ADP-DnaA, the inactive form. RIDA involves the binding of the DNA polymerase clamp on newly synthesized DNA to the DnaA-inactivator Hda protein. In datA-dependent DnaA-ATP hydrolysis (DDAH), binding of IHF at the chromosomal locus datA, which contains a cluster of DnaA boxes, results in further hydrolysis of DnaA-bound ATP. SeqA protein inhibits untimely initiation at oriC by binding to newly synthesized oriC DNA and represses dnaA transcription in a cell cycle dependent manner. To reinitiate DNA replication, ADP-DnaA forms oligomers at DnaA-reactivating sequences (DARS1 and DARS2), resulting in the dissociation of ADP and the release of nucleotide-free apo-DnaA, which then binds ATP to regenerate ATP-DnaA. In vivo, DARS2 plays an important role in this process and its activation is regulated by timely binding of IHF to DARS2 in the cell cycle. Chromosomal locations of DARS sites are optimized for the strict regulation for timely replication initiation. The last part of this review describes how DDAH and DARS regulate DnaA activity.

Replication origin–flanking roadblocks reveal origin-licensing dynamics and altered sequence dependence

In eukaryotes, DNA replication initiates from multiple origins of replication for timely genome duplication. These sites are selected by origin licensing, during which the core enzyme of the eukaryotic DNA replicative helicase, the Mcm2-7 (minichromosome maintenance) complex, is loaded at each origin. This origin licensing requires loading two Mcm2-7 helicases around origin DNA in a head-to-head orientation. Current models suggest that the origin-recognition complex (ORC) and cell-division cycle 6 (Cdc6) proteins recognize and encircle origin DNA and assemble an Mcm2-7 double-hexamer around adjacent double-stranded DNA. To test this model and assess the location of Mcm2-7 initial loading, we placed DNA-protein roadblocks at defined positions adjacent to the essential ORC-binding site within Saccharomyces cerevisiae origin DNA. Roadblocks were made either by covalent cross-linking of the HpaII methyltransferase to DNA or through binding of a transcription activator-like effector (TALE) protein. Contrary to the sites of Mcm2-7 recruitment being precisely defined, only single roadblocks that inhibited ORC-DNA binding showed helicase loading defects. We observed inhibition of helicase loading without inhibition of ORC-DNA binding only when roadblocks were placed on both sides of the origin to restrict sliding of a helicase-loading intermediate. Consistent with a sliding helicase-loading intermediate, when either one of the flanking roadblocks was eliminated, the remaining roadblock had no effect on helicase loading. Interestingly, either origin-flanking nucleosomes or roadblocks resulted in helicase loading being dependent on an additional origin sequence known to be a weaker ORC-DNA-binding site. Together, our findings support a model in which sliding helicase-loading intermediates increase the flexibility of the DNA sequence requirements for origin licensing.

Rv0004 is a new essential member of the mycobacterial DNA replication machinery.

DNA replication is fundamental for life, yet a detailed understanding of bacterial DNA replication is limited outside the organisms Escherichia coli and Bacillus subtilis. Many bacteria, including mycobacteria, encode no identified homologs of helicase loaders or regulators of the initiator protein DnaA, despite these factors being essential for DNA replication in E. coli and B. subtilis. In this study we discover that a previously uncharacterized protein, Rv0004, from the human pathogen Mycobacterium tuberculosis is essential for bacterial viability and that depletion of Rv0004 leads to a block in cell cycle progression. Using a combination of genetic and biochemical approaches, we found that Rv0004 has a role in DNA replication, interacts with DNA and the replicative helicase DnaB, and affects DnaB-DnaA complex formation. We also identify a conserved domain in Rv0004 that is predicted to structurally resemble the N-terminal protein-protein interaction domain of DnaA. Mutation of a single conserved tryptophan within Rv0004’s DnaA N-terminal-like domain leads to phenotypes similar to those observed upon Rv0004 depletion and can affect the association of Rv0004 with DnaB. In addition, using live cell imaging during depletion of Rv0004, we have uncovered a previously unappreciated role for DNA replication in coordinating mycobacterial cell division and cell size. Together, our data support that Rv0004 encodes a homolog of the recently identified DciA family of proteins found in most bacteria that lack the DnaC-DnaI helicase loaders in E. coli and B. subtilis. Therefore, the mechanisms of Rv0004 elucidated here likely apply to other DciA homologs and reveal insight into the diversity of bacterial strategies in even the most conserved biological processes.

Molecular Mechanisms That Contribute to Horizontal Transfer of Plasmids by the Bacteriophage SPP1.

Natural transformation and viral-mediated transduction are the main avenues of horizontal gene transfer in Firmicutes. Bacillus subtilis SPP1 is a generalized transducing bacteriophage. Using this lytic phage as a model, we have analyzed how viral replication and recombination systems contribute to the transfer of plasmid-borne antibiotic resistances. Phage SPP1 DNA replication relies on essential phage-encoded replisome organizer (G38P), helicase loader (G39P), hexameric replicative helicase (G40P), recombinase (G35P) and in less extent on the partially dispensable 5′→3′ exonuclease (G34.1P), the single-stranded DNA binding protein (G36P) and the Holliday junction resolvase (G44P). Correspondingly, the accumulation of linear concatemeric plasmid DNA, and the formation of transducing particles were blocked in the absence of G35P, G38P, G39P, and G40P, greatly reduced in the G34.1P, G36P mutants, and slightly reduced in G44P mutants. In contrast, establishment of injected linear plasmid DNA in the recipient host was independent of viral-encoded functions. DNA homology between SPP1 and the plasmid, rather than a viral packaging signal, enhanced the accumulation of packagable plasmid DNA. The transfer efficiency was also dependent on plasmid copy number, and rolling-circle plasmids were encapsidated at higher frequencies than theta-type replicating plasmids.