Helical Elements Research Articles

Structure of the Claudin-binding Domain of Clostridium perfringens Enterotoxin

Clostridium perfringens enterotoxin is a common cause of food-borne and antibiotic-associated diarrhea. The toxin's receptors on intestinal epithelial cells include claudin-3 and -4, members of a large family of tight junction proteins. Toxin-induced cytolytic pore formation requires residues in the NH(2)-terminal half, whereas residues near the COOH terminus are required for binding to claudins. The claudin-binding COOH-terminal domain is not toxic and is currently under investigation as a potential drug absorption enhancer. Because claudin-4 is overexpressed on some human cancers, the toxin is also being investigated for targeting chemotherapy. Our aim was to solve the structure of the claudin-binding domain to advance its therapeutic applications. The structure of a 14-kDa fragment containing residues 194 to the native COOH terminus at position 319 was solved by x-ray diffraction to a resolution of 1.75A. The structure is a nine-strand beta sandwich with previously unappreciated similarity to the receptor-binding domains of several other toxins of spore-forming bacteria, including the collagen-binding domain of ColG from Clostridium histolyticum and the large Cry family of toxins (including Cry4Ba) of Bacillus thuringiensis. Correlations with previous studies suggest that the claudin-4 binding site is on a large surface loop between strands beta8 and beta9 or includes these strands. The sequence that was crystallized (residues 194-319) binds to purified human claudin-4 with a 1:1 stoichiometry and affinity in the submicromolar range similar to that observed for binding of native toxin to cells. Our results provide a structural framework to advance therapeutic applications of the toxin and suggest a common ancestor for several receptor-binding domains of bacterial toxins.

Ef1097 and ypkK encode enterococcin V583 and corynicin JK, members of a new family of antimicrobial proteins (bacteriocins) with modular structure from Gram-positive bacteria

Unlike the colicins, microcins and related peptide antibiotics, little is known about antibiotic proteins (M(r)>10,000) from Gram-positive bacteria, since only few examples have been described to date. In this study we used heterologous expression of recombinant proteins to access the 17 kDa antibiotic protein SA-M57 from Streptococcus pyogenes, along with two proteins of unknown function identified in publicly available databases: EF1097 from Enterococcus faecalis and YpkK from Corynebacterium jeikeium. Here we show that all three are antibiotic proteins with different spectra of antimicrobial activity that kill sensitive bacteria at nanomolar concentrations. In silico structure predictions indicate that although the three proteins share little sequence similarity, they may be composed of conserved secondary structural elements: a relatively unstructured, acidic N-terminal portion and a basic C-terminal portion characterized by two helical elements separated by a loop structure and stabilized by an essential disulphide. Expression of individual segments as well as protein chimaeras revealed that, at least in the case of YpkK, the C-terminal portion is responsible for the killing action of the protein, whereas the role of the N-terminal portion remains unclear. Both scnM57 and ef1097 appear to be widely distributed in Strep. pyogenes and Ent. faecalis (respectively), whereas ypkK is found only rarely amongst clinical isolates of C. jeikeium. Finally, we determined that the proteins kill sensitive bacteria without lysis, a feature that distinguishes them from known murolytic proteins.

Crystal Structure of Conserved Domains 1 and 2 of the Human DEAD-box Helicase DDX3X in Complex with the Mononucleotide AMP

DExD-box helicases are involved in all aspects of cellular RNA metabolism. Conserved domains 1 and 2 contain nine signature motifs that are responsible for nucleotide binding, RNA binding and ATP hydrolysis. The human DEAD-box helicase DDX3X has been associated with several different cellular processes, such as cell-growth control, mRNA transport and translation, and is suggested to be essential for the export of unspliced/partially spliced HIV mRNAs from the nucleus to the cytoplasm. Here, the crystal structure of conserved domains 1 and 2 of DDX3X, including a DDX3-specific insertion that is not generally found in human DExD-box helicases, is presented. The N-terminal domain 1 and the C-terminal domain 2 both display RecA-like folds comprising a central β-sheet flanked by α-helices. Interestingly, the DDX3X-specific insertion forms a helical element that extends a highly positively charged sequence in a loop, thus increasing the RNA-binding surface of the protein. Surprisingly, although DDX3X was crystallized in the presence of a large excess of ADP or the slowly hydrolyzable ATP analogue ATPγS the contaminant AMP was seen in the structure. A fluorescent-based stability assay showed that the thermal stability of DDX3X was increased by the mononucleotide AMP but not by ADP or ATPγS, suggesting that DDX3X is stabilized by AMP and elucidating why AMP was found in the nucleotide-binding pocket.

Conformational analysis of compstatin analogues with molecular dynamics simulations in explicit water

The cyclic 13-residue peptide compstatin is a potential therapeutic agent against the unregulated activation of the complement system. A thorough knowledge of its structural and dynamical properties in solution may assist the design of improved complement inhibitors. NMR studies have suggested that the 5–8 segment of free compstatin folds into a critical for activity 5–8 β turn and the rest of the peptide is mainly disordered. Earlier computational studies of compstatin analogues with a polar-hydrogen/generalized-Born approximation reproduced the 5–8 turn, but also indicated the formation of β -hairpin or α -helical elements and the existence of interactions between certain charged or aromatic sidechains. However, these features are absent or partly present in the NMR spectra, due to extensive conformational averaging. In order to check the compstatin properties with a more rigorous model of the intra- and intermolecular interactions, we conduct here 98-ns all-atom/explicit-water simulations of three compstatin analogues with variable activity; a native analogue, the more active mutant V4W/H9A and the inactive mutant Q5G. The 5–8 β -turn population is in good accord with NMR. For the systems studied here, the simulations suggest that the 5–8 turn population does not correlate strictly with activity, in agreement with earlier mutational studies. Furthermore, they show structural differences among the analogues outside the 5–8 region. The possible role of these differences in activity is discussed. The probability of β -hairpin or α -helix elements is much smaller with respect to the polar-hydrogen/GB simulations, and the persistent Trp4-Trp7 or Asp6-Arg11 sidechain interactions of the earlier GB studies are not reproduced. The present simulations extend the NMR data and improve our understanding of the properties of compstatin and related analogues.

Structural and functional comparison of the non-structural protein 4B in flaviviridae

Flaviviridae are evolutionarily related viruses, comprising the hepatitis C virus (HCV), with the non-structural protein 4B (NS4B) as one of the least characterized proteins. NS4B is located in the endoplasmic reticulum membrane and is assumed to be a multifunctional protein. However, detailed structure information is missing. The hydrophobic nature of NS4B is a major difficulty for many experimental techniques. We applied bioinformatics methods to analyse structural and functional properties of NS4B in different viruses. We distinguish a central non-globular membrane portion with four to five transmembrane regions from an N- and C-terminal part with non-transmembrane helical elements. We demonstrate high similarity in sequence and structure for the C-terminal part within the flaviviridae family. A palmitoylation site contained in the C-terminal part of HCV is equally conserved in GB virus B. Furthermore, we identify and characterize an N-terminal basic leucine zipper (bZIP) motif in HCV, which is suggestive of a functionally important interaction site. In addition, we model the interaction of the bZIP region with the recently identified interaction partner CREB-RP/ATF6β, a human activating transcription factor involved in ER-stress. In conclusion, the versatile structure, together with functional sites and motifs, possibly enables NS4B to adopt a role as protein hub in the membranous web interaction network of virus and host proteins. Important structural and functional properties of NS4B are predicted with implications for ER-stress response, altered gene expression and replication efficacy.

Inline Bitumen Emulsification Using Static Mixers

Highly concentrated bitumen-in-water emulsions were produced with static mixers in continuous mode. The effect of the following process parameters on the average droplet size was studied: emulsion flowrate, static mixers configuration, and surfactant concentration as well as bitumen hardness, concentration, and temperature. Several static mixer configurations were investigated consisting of combinations of SMX (Sulzer Chemtech Ltd.) and helical elements with empty sections. The drop size results revealed that the mean droplet size could be scaled with the energy or the power draw depending on the static mixer configuration. Moreover, it was shown that the energy draw could capture the effect of emulsion flowrate and bitumen concentration on the mean droplet size, whereas the power draw (or the specific power) captured the effect of the emulsion flowrate and bitumen temperature. It was also demonstrated that the specific energy, or pressure drop, was minimized when SMX mixers were inserted after helical mixers.

Truncation of amidated fragment 33–61 of bovine α‐hemoglobin: Effects on the structure and anticandidal activity

Peptides derived from endogenous hemoglobin play important biological roles in a variety of living systems. In previous works we showed that the fragment 33-61 of bovine alpha-hemoglobin (Hb33-61) and its C-terminus amidated analogue (Hb33-61a) exhibit antimicrobial activity and we determined the 3D structure of Hb33-61a bound to sodium dodecyl sulfate micelles. Here we report that Hb33-61a is lethal to Candida albicans at 6.25 microM probably through disruption of its plasma membrane. In addition, we show that, even when used at 50 microM, Hb33- 61a produces low hemolysis (16% +/- 3.0%). Recognizing that one of the key steps to study new compounds with potential pharmaceutical application is to identify the structural elements essential to express biological activity, we also investigated the anticandidal activity of Hb33- 61a fragments. The results indicated that Hb40-61a exhibits the same minimal inhibitory concentration as Hb33-61a, whereas Hb33-52a and Hb48-61a are significantly less active. Noteworthy, for all the peptides tested, we observed that C-terminus amidation produces a potentiation of their anticandidal activity and we associate that increased biological activity to a preferred structural and spatial organization of the C-terminal region favored by amidation. Finally, the data show that the most active peptides (Hb33-61a and Hb40-61a) are characterized by a central hinge joining the C-terminal region that presents, containing a beta-turn, followed by and a helical element, to the N-terminal region that presents only a beta-turn. We hypothesize that these two structured regions, by fluctuating independently in the lipid environment, may act in a coordinated fashion disrupting the yeast plasma membrane.

Electron Hole Flow Patterns through the RNA-Cleaving 8-17 Deoxyribozyme Yield Unusual Information about Its Structure and Folding

DNA double helices have been shown to conduct electron holes over significant distances. Here, we report on the hole flow patterns within a more intricately folded DNA complex, the 8-17 deoxyribozyme bound to a DNA pseudosubstrate, incorporating three helical elements and two catalytically relevant loops. The observed hole flow patterns within the complex permitted a quantitative assessment of the stacking preferences of the three constituent helices and provided evidence for significant transitions within the complex's global geometry. The patterns further suggested varying levels of solvent exposure of the complex's constituent parts, and revealed that a catalytically relevant cytosine within the folded complex exists in an unusual structural/electronic environment. Our data suggest that the study of charge flow may provide novel perspectives on the structure and folding of intricately folded DNAs and RNAs.

VCD spectroscopic and molecular dynamics analysis of the Trp‐cage miniprotein TC5b

TC5b is a 20 residue polypeptide notable for its compact tertiary structure, a rarity for a short peptide. This structure is due to the "Trp-cage" motif, an association of aromatic, Pro, and Gly residues. The structure of TC5b has been fully characterized by NMR and electronic circular dichroism (ECD) studies, but has never been studied with vibrational circular dichroism (VCD) spectroscopy, which may reveal finer structure. In this study, we examine the VCD spectra of TC5b to characterize the spectroscopic signature of the peptide and its comprising structural elements. TC5b exhibited a negative-positive-negative triplet which is associated with alpha-helical structure in deuterated solvents but also signs of a polyproline II (PPII) helix in the amide I' region. Detection of this element was complicated by the aforementioned triplet form, as well as by an upfrequency shift in PPII helical elements due to the use of the deuterated organic solvents DMSO-d(6) and TFE-d(1). Nevertheless, while ECD spectra showed only alpha-helical structure for TC5b, VCD spectroscopy revealed a more complex structure which was in agreement with NMR results. VCD spectroscopy also showed a rapid conformational change of the peptide at temperatures above 35 degrees C in D(2)O and in aqueous solvent with greater than 75% DMSO-d(6) content. Molecular dynamics (MD) simulations to investigate this latter effect of DMSO-d(6) on TC5b were conducted in DMSO and 50% (v/v) DMSO in H(2)O. In DMSO unfolding of the peptide was rapid while in 50% (v/v) DMSO in H(2)O the unfolding was more gradual.

Experimental studies on heat transfer and friction factor characteristics of turbulent flow through a circular tube fitted with regularly spaced helical screw-tape inserts

Experimental investigation of heat transfer and friction factor characteristics of circular tube fitted with full-length helical screw element of different twist ratio, and helical screw inserts with spacer length 100, 200, 300, and 400 mm have been studied with uniform heat flux under turbulent flow condition. The experimental data obtained are verified with those obtained from plain tube published data. The effect of spacer length on heat transfer augmentation and friction factor, and the effect of twist ratio on heat transfer augmentation and friction factor have been presented separately. The decrease in Nusselt number for the helical twist with spacer length is within 10% for each subsequent 100 mm increase in spacer length. The friction factor for helical twist insert with spacer length 100 mm is very much close to value of friction factor for full-length helical twist for all Reynolds number and decreases by 5% for each 100 mm increment space length indicating that there is no much reduction in pumping power. Hence the helical screw inserts with spacer can only be used for heat augmentation only in turbulent flow with less reduction in pumping power. Empirical correlation were formed for explaining data and found to fit experimental data within ±10%, and ±20%, respectively, for Nusselt number and friction factor.

Experimental studies on heat transfer and friction factor characteristics of turbulent flow through a circular tube fitted with helical screw-tape inserts

Experimental investigation of heat transfer and friction factor characteristics of circular tube fitted with full-length helical screw element of different twist ratio, and increasing and decreasing order of twist ratio set have been studied with uniform heat flux under turbulent flow conditions. The Reynolds number was varied from 2700 to 13 500. The experimental data obtained are compared with those obtained from plain tube published data. The maximum Nusselt number for the twist of 1.95 was obtained. The performance of the helical twist insert was compared with the twisted tape performance reported in the literature and found that it is better than twisted tape performance. The heat transfer augmentation for helical twist of increasing and decreasing order twist were also presented. The empirical correlations developed relating twist ratio and Reynolds number, are fitting the experimental data within ±13% and ±15% for Nusselt number and friction factor, respectively. The performance evaluation study has been presented to check the potential of using the helical twist insert.

Nephrocan, a Novel Member of the Small Leucine-rich Repeat Protein Family, Is an Inhibitor of Transforming Growth Factor-β Signaling

In a search of new, small leucine-rich repeat proteoglycan/protein (SLRP) family members, a novel gene, nephrocan (NPN), has been identified. The gene consists of three exons, and based on the deduced amino acid sequence, NPN has 17 leucine-rich repeat motifs and unique cysteine-rich clusters both in the N and C termini, indicating that this gene belongs to a new class of SLRP family. NPN mRNA was predominantly expressed in kidney in adult mice, and during mouse embryogenesis, the expression was markedly increased in 11-day-old embryos at a time when early kidney development takes place. In the adult mouse kidney, NPN protein was located in distal tubules and collecting ducts. When NPN was overexpressed in cell culture, the protein was detected in the cultured medium, and upon treatment with N-glycosidase F, the molecular mass was lowered by approximately 14 kDa, indicating that NPN is a secreted N-glycosylated protein. Furthermore, transforming growth factor-beta (TGF-beta)-responsive 3TP promoter luciferase activity was down-regulated, and TGF-beta-induced Smad3 phosphorylation was also inhibited by NPN, suggesting that NPN suppresses TGF-beta/Smad signaling. Taken together, NPN is a novel member of the SLRP family that may play important roles in kidney development and pathophysiology by functioning as an endogenous inhibitor of TGF-beta signaling.

Structural and biochemical basis for misfolded RNA recognition by the Ro autoantigen

The Ro autoantigen is ring-shaped, binds misfolded noncoding RNAs and is proposed to function in quality control. Here we determine how Ro interacts with misfolded RNAs. Binding of Ro to misfolded precursor (pre)-5S ribosomal RNA requires a single-stranded 3' end and helical elements. As mutating most sequences of the helices and tail results in modest decreases in binding, Ro may be able to associate with a range of RNAs. Ro binds several other RNAs that contain single-stranded tails. A crystal structure of Ro bound to a misfolded pre-5S rRNA fragment reveals that the tail inserts into the cavity, while a helix binds on the surface. Most contacts of Ro with the helix are to the backbone. Mutagenesis reveals that Ro has an extensive RNA-binding surface. We propose that Ro uses this surface to scavenge RNAs that fail to bind their specific RNA-binding proteins.

Structural Analysis of the Regulatory Dithiol-containing Domain of the Chloroplast ATP Synthase γ Subunit

The gamma subunit of the F1 portion of the chloroplast ATP synthase contains a critically placed dithiol that provides a redox switch converting the enzyme from a latent to an active ATPase. The switch prevents depletion of intracellular ATP pools in the dark when photophosphorylation is inactive. The dithiol is located in a special regulatory segment of about 40 amino acids that is absent from the gamma subunits of the eubacterial and mitochondrial enzymes. Site-directed mutagenesis was used to probe the relationship between the structure of the gamma regulatory segment and its function in ATPase regulation via its interaction with the inhibitory epsilon subunit. Mutations were designed using a homology model of the chloroplast gamma subunit based on the analogous structures of the bacterial and mitochondrial homologues. The mutations included (a) substituting both of the disulfide-forming cysteines (Cys199 and Cys205) for alanines, (b) deleting nine residues containing the dithiol, (c) deleting the region distal to the dithiol (residues 224-240), and (d) deleting the entire segment between residues 196 and 241 with the exception of a small spacer element, and (e) deleting pieces from a small loop segment predicted by the model to interact with the dithiol domain. Deletions within the dithiol domain and within parts of the loop segment resulted in loss of redox control of the ATPase activity of the F1 enzyme. Deleting the distal segment, the whole regulatory domain, or parts of the loop segment had the additional effect of reducing the maximum extent of inhibition obtained upon adding the epsilon subunit but did not abolish epsilon binding. The results suggest a mechanism by which the gamma and epsilon subunits interact with each other to induce the latent state of the enzyme.

Two independently selected capping ribozymes share similar substrate requirements

We report the isolation and characterization of a second capping ribozyme, called 6.17. This ribozyme has substrate requirements that are very similar to a previously isolated capping ribozyme called Iso6. Both ribozymes promote capping and cap exchange reactions with a broad range of nucleotide substrates. The ribozymes mediate a reaction where the terminal phosphate of the nucleotide substrate attacks the alpha-phosphate found at the ribozyme's 5' terminus. This reaction involves the release of pyrophosphate during capping or a nucleotide during cap exchange. The second-order rate constants for 6.17 and Iso6 depend strongly on the length of the phosphate group found on the nucleotide substrate. Nucleoside diphosphates or triphosphates are efficiently utilized, while monophosphates are used approximately 20-fold less efficiently by both ribozymes. These ribozymes also have rates that increase as pH is decreased. Despite these similarities, the ribozymes are not identical and 6.17 performs optimally when incubated with divalent magnesium ions, while Iso6 displays a preference for calcium ions. Further, the ribozymes have globally different secondary structures; 6.17 has a complicated pseudoknot structure consisting of five helical elements, while Iso6 likely consists of four helical elements. We hypothesize that capping proceeds via an invariant phosphate dependent mechanism that imposes a nearly identical "catalytic fingerprint" on these two distinct ribozymes.

Structurally Mapping the Diverse Phenotype of Adeno-Associated Virus Serotype 4

The adeno-associated viruses (AAVs) can package and deliver foreign DNA into cells for corrective gene delivery applications. The AAV serotypes have distinct cell binding, transduction, and antigenic characteristics that have been shown to be dictated by the capsid viral protein (VP) sequence. To understand the contribution of capsid structure to these properties, we have determined the crystal structure of AAV serotype 4 (AAV4), one of the most diverse serotypes with respect to capsid protein sequence and antigenic reactivity. Structural comparison of AAV4 to AAV2 shows conservation of the core beta strands (betaB to betaI) and helical (alphaA) secondary structure elements, which also exist in all other known parvovirus structures. However, surface loop variations (I to IX), some containing compensating structural insertions and deletions in adjacent regions, result in local topological differences on the capsid surface. These include AAV4 having a deeper twofold depression, wider and rounder protrusions surrounding the threefold axes, and a different topology at the top of the fivefold channel from that of AAV2. Also, the previously observed "valleys" between the threefold protrusions, containing AAV2's heparin binding residues, are narrower in AAV4. The observed differences in loop topologies at subunit interfaces are consistent with the inability of AAV2 and AAV4 VPs to combine for mosaic capsid formation in efforts to engineer novel tropisms. Significantly, all of the surface loop variations are associated with amino acids reported to affect receptor recognition, transduction, and anticapsid antibody reactivity for AAV2. This observation suggests that these capsid regions may also play similar roles in the other AAV serotypes.

Repeat Motions and Backbone Flexibility in Designed Proteins with Different Numbers of Identical Consensus Tetratricopeptide Repeats

The tetratricopeptide repeat (TPR) is a 34-residue helix-turn-helix motif that occurs as three or more tandem repeats in a wide variety of proteins. We have determined the repeat motions and backbone fluctuations of proteins containing two or three consensus TPR repeats (CTPR2 and CPTR3, respectively) using 15N NMR relaxation measurements. Rotational diffusion tensors calculated from these data for each repeat within each TPR protein indicate that there is a high degree of motional correlation between different repeats in the same protein. This is consistent with the prevailing view that repeat proteins, such as CTPR2 and CTPR3, behave as single cooperatively folded domains. The internal motions of backbone NH groups were determined using the Lipari-Szabo model-free formalism. For most residues, there was a clear separation between the influence of internal motion and the influence of global rotational tumbling on the observed magnetic relaxation. The local internal motions are highly restricted in most of the helical elements, with slightly greater flexibility in the linker elements. Comparisons between CTPR2 and CTPR3 indicate that an addition of a TPR repeat to the C-terminus (before the solvation helix) of CTPR2 slightly reduces the flexibility of the preceding helix.

The Folding Nucleus of the Insulin Superfamily: A FLEXIBLE PEPTIDE MODEL FORESHADOWS THE NATIVE STATE

Oxidative folding of insulin-like growth factor I (IGF-I) and single-chain insulin analogs proceeds via one- and two-disulfide intermediates. A predominant one-disulfide intermediate in each case contains the canonical A20-B19 disulfide bridge (cystines 18-61 in IGF-I and 19-85 in human proinsulin). Here, we describe a disulfide-linked peptide model of this on-pathway intermediate. One peptide fragment (19 amino acids) spans IGF-I residues 7-25 (canonical positions B8-B26 in the insulin superfamily); the other (18 amino acids) spans IGF-I residues 53-70 (positions A12-A21 and D1-D8). Containing only half of the IGF-I sequence, the disulfide-linked polypeptide (designated IGF-p) is not well ordered. Nascent helical elements corresponding to native alpha-helices are nonetheless observed at 4 degrees C. Furthermore, (13)C-edited nuclear Overhauser effects establish transient formation of a native-like partial core; no non-native nuclear Overhauser effects are observed. Together, these observations suggest that early events in the folding of insulin-related polypeptides are nucleated by a native-like molten subdomain containing Cys(A20) and Cys(B19). We propose that nascent interactions within this subdomain orient the A20 and B19 thiolates for disulfide bond formation and stabilize the one-disulfide intermediate once formed. Substitutions in the corresponding region of insulin are associated with inefficient chain combination and impaired biosynthetic expression. The intrinsic conformational propensities of a flexible disulfide-linked peptide thus define a folding nucleus, foreshadowing the structure of the native state.

Polarization Plane Rotation of Electromagnetic Waves by the Artificial Periodic Structure with One-Turn Helical Elements

The rotation of polarization plane of electromagnetic waves by the metallic helices is experimentally investigated. The object of investigation is electromagnetic waves scattered by the copper wire one-turn helices. Flat periodic structure consists of 1-turn helices placed on the radio transparent material that is manufactured. The helices are excited by a linear electromagnetic wave. The experimental method is based on the registration of polarization plane rotation of wave reflected by a two-dimensional (2D) lattice. The optimal pitch angle of the helix which is necessary for maximal rotation of polarization plane of waves was calculated previously. The optimal parameters of the helix were taken into account when the 2D lattice was manufactured. As a result even the flat lattice was enough for observation of considerable rotation of the polarization plane of transmitted and reflected waves. For transmitted wave, the resonance behavior of rotation of the polarization plane with sign change of angle of rotation as a function of frequency is observed.

Experimental studies on heat transfer and friction factor characteristics of laminar flow through a circular tube fitted with regularly spaced helical screw-tape inserts

Experimental investigation of heat transfer and friction factor characteristics of circular tube fitted with full-length helical screw element of different twist ratio, and helical screw inserts with spacer length 100, 200, 300 and 400 mm have been studied with uniform heat flux under laminar flow condition. The experimental data obtained are verified with those obtained from plain tube published data. The effect of spacer length on heat transfer augmentation and friction factor, and the effect of twist ratio on heat transfer augmentation and friction factor have been presented separately. The decrease in Nusselt number for the helical twist with spacer length is within 10% for each subsequent 100 mm increase in spacer length. The decrease in friction factor is nearly two times lower than the full length helical twist at low Reynolds number, and four times lower than the full length helical twist at high Reynolds number for all twist ratio. The regularly spaced helical screw inserts can safely be used for heat transfer augmentation without much increase in pressure drop than full length helical screw inserts.