Heating Of Magnetic Nanoparticles Research Articles

Magnetic nanoparticle‐induced sorbent regeneration for direct air capture

AbstractDirect air capture (DAC) is a promising technology for decarbonization through the removal of CO2 from the atmosphere. In many DAC processes, the regeneration energy used to restore the capture capacity of sorbents accounts for a significant fraction of the energy required by the whole process. Here we report an effective and scalable sorbent regeneration method for liquid DAC solvents based on magnetic nanoparticles (MNPs) heating with AC magnetic fields. MNPs can be directly heated to provide uniform and rapid volumetric heating, as we demonstrate by promoting the release of captured CO2 from an aqueous solution of potassium sarcosinate. Our results showed that 90% of the solvent can be regenerated within 7.5 min of heating through proposed technique. The MNPs and solvent are found to be stable during the regeneration process and the MNPs showed long‐term stability in the CO2‐saturated solvent. Cyclic experiments showed that the nanoparticles can be reused for multiple cycles without performance deterioration. The process is operated in a noncontact mode through electromagnetic waves, making it an adoptable approach for existing carbon capture systems. The MNPs heating provides an effective regeneration strategy for liquid solvents used in carbon capture processes, in particular for DAC.

Induction heating of magnetic nanoparticles: role of thermo-physical properties of the coating moieties

Superparamagnetic nanoparticles (MNPs) are utilized for magnetic fluid hyperthermia (MFH)-based cancer therapeutics, where the MNPs are surface functionalized to impart desired stability and biological properties. In this study, the MFH properties of palmitic (PA) and stearic (SA) acid-coated superparamagnetic Fe3O4 MNPs, with similar sizes (∼ 10 ± 0.8 nm, and ∼ 11 ± 0.7 nm, respectively), and saturation magnetizations (∼ 40.8 emu/g, and ∼ 41 emu/g, respectively), are systematically probed to understand the role of the thermo-physical properties of the coating moieties on the MFH efficiency. PA and SA-coated MNPs are prepared using a one-step microwave-assisted co-precipitation technique, and the presence of the surface coatings is confirmed using Fourier transform infrared spectroscopy and thermogravimetric analyses. Magneto-calorimetric studies show a high induction heating efficiency, surpassing the threshold of MFH for a biologically relevant field-frequency range. The maximum heating efficiencies are found to be ∼ 164.5 ± 5.4 W/gFe and ∼ 223.9 ± 6.4 W/gFe for the PA and SA-coated MNPs, respectively. This indicates ∼ 36.1 % higher specific absorption rate (SAR) for the SA-coated MNPs under similar experimental conditions, even though the magneto-structural properties are identical for the PA and SA-coated MNPs. Further, finite element modelling is utilized to investigate the thermal transport from the magnetic core to the surrounding medium, where the thermo-physical properties of the coating moieties are considered. Finite element simulations indicate ∼ 32.6 % higher SAR for the SA-coated MNPs, which is consistent with the experimental findings. The higher SAR for the SA-coated MNPs is attributed to the ∼ 1.7 times higher thermal diffusivity of SA. The proposed model is experimentally validated using a third system consisting of lauric acid-coated Fe3O4 MNPs with comparable magneto-structural properties. Further, significant temperature rise in a tissue-equivalent agar medium and good bio-compatibility, as indicated by the in vitro cyto-toxicity studies, make the prepared MNPs potential candidates for MFH applications. The obtained results provide deeper insight into the role of the thermo-physical properties of the coating moieties on the induction heating efficiency of superparamagnetic MNPs.

Development of experimental device for inductive heating of magnetic nanoparticles

Inductive heating using magnetic nanoparticles is a critical process extensively investigated for cancer treatment. However, the high cost of commercially available equipment hinders its accessibility for many research groups. In response, this paper introduces a simple electronic circuit with low-cost components, making it easy to construct even for non-electronic experts. Operating within the 50–200 kHz range, the circuit employs a parallel inductor-capacitor configuration, providing a maximum induction magnetic field of 23.6 mT. Ltspice software simulations align well with oscilloscope measurements. Using commercial iron oxide nanoparticles (∼16 nm) in water suspensions (1–10 mg ml−1), the device exhibited a concentration-dependent reduction in specific absorption rate values, consistent with literature findings. Hyperthermia temperatures were achieved in a few minutes at 52.5 kHz and 23.6 mT in the highest concentration. At 81.9 kHz and 21.5 mT, a temperature of 93 °C was achieved after 22 min at 10 mg ml−1. Additionally, the device demonstrated stable and safe operation over a 100 min period, as validated by an ice-melting experiment. These results highlight the device’s efficacy for hyperthermia experiments in both biological and non-biological systems, particularly advantageous for larger nanoparticles in a blocked state. The proposed device holds significant potential for contributing to hyperthermia studies across diverse research groups. Future development will focus on frequency adjustment without reducing the alternating magnetic field amplitude and a thorough investigation of field homogeneity inside the coils.

A Novel Local Magnetic Fluid Hyperthermia Based on High Gradient Field Guided by Magnetic Particle Imaging.

Magnetic Particle Imaging (MPI)-guided Magnetic Fluid Hyperthermia (MFH) has the potential for widespread utilization, as it allows for the prediction of magnetothermal dosage, real-time visualization of the thermal therapy process, and precise localization of the lesion area. However, the existing MPI-guided MFH (MPI-MFH) method is insensitive to concentration gradients of magnetic nanoparticles (MNPs) and is susceptible to causing damage to normal tissues with high MNP concentrations during MFH treatment, while inadequately heating tumor tissues with lower MNP concentrations. In this work, we established a relationship between MNP concentration and heating efficiency through simulations and phantom measurements, enabling the optimal selection of MFH parameters guided by MPI. Based on these findings, we developed a high-gradient field MPI-MFH method using a fieldfree point (FFP) approach to achieve precise local heating. Phantom experiments and in vivo glioma model experiments were conducted to validate this proposed method. The results demonstrated that the proposed method of MPIMFH can improve the MNP concentration gradient sensitivity to ±1 mg/ml, thereby enabling more effective lesion-site heating without damaging normal tissues. This method not only reduced glioma size effectively but also holds promise for application in various other types of cancers.

An efficient magnetothermal actuation setup for fast heating/cooling cycles or long-term induction heating of different magnetic nanoparticle classes

Alternating magnetic fields (AMFs) in the ∼100 kHz frequency regime cause magnetic nanoparticles (MNPs) to dissipate heat to their nanoscale environment. This mechanism is beneficial for a variety of applications in biomedicine and nanotechnology, such as localized heating of cancer tissue, actuation of drug release, or inducing conformational changes of molecules. However, engineering electromagnetic resonant circuits which generate fields to efficiently heat MNPs over long time scales, remains a challenge. In addition, many applications require fast heating/cooling cycles over ΔT= 5 °C–10 °C to switch the sample between different states. Here, we present a home-built magnetothermal actuation setup maximized in its efficiency to deliver stable AMFs as well as to enable fast heating/cooling cycles of MNP samples. The setup satisfies various demands, such as an elaborate cooling system to control heating of the circuit components as well as of the sample due to inductive losses. Fast cycles of remote sample heating/cooling (up to ±15 °C min−1) as well as long-term induction heating were monitored via contact-free thermal image recording at sub-mm resolution. Next to characterizing the improved hyperthermia setup, we demonstrate its applicability to heat different types of MNPs: ‘nanoflower’-shaped multicore iron oxide nanoparticles, core shell magnetite MNPs, as well as magnetosomes from magnetotactic bacteria (Magnetospirillum gryphiswaldense). MNPs are directly compared in their structure, surface charge, magnetic properties as well as heating response. Our work provides practical guidelines for AMF engineering and the monitoring of MNP heating for biomedical or nano-/biotechnological applications.

An exhaustive scrutiny to amplify the heating prospects by devising a core@shell nanostructure for constructive magnetic hyperthermia applications

An interfacial integration at the nanoscale domain through a core@shell (CS) nanostructure has constructively unbarred a wide dimension to researchers on biomedical applications, especially for magnetic fluid hyperthermia. Lately, the interconnection of the exchange bias effect (EBE) through the interface coupling to the magnetic heating efficiency has uttered its utmost prominence for researchers. Here, we delineate the ascendency of the heating ability through a coalescing assembly of mixed ferrite Co0.5Zn0.5 Fe2O4 (CZ) and soft magnetic material Fe3O4 (F), by devising a network of CoZnFe2O4@Fe3O4 (CZF) CS nanostructure. A hefty interface activity with validation of the EBE phenomenon is divulged through magnetic scrutiny for the CS sample. The magnetic nanoparticles heating response to applied magnetic field and frequency is discerned at three distinct fields, where the outcome prevailed to inflated specific loss power for CS CZF in distinction to bare F and CZ samples for all the assessments. Remarkably; a lofty intrinsic loss parameter is also perceived for the CS sample recorded to about 5.36 nHm2 g−1; which is another eccentric outcome that significantly labels the CS CZF sample as a potentially high heating competence agent. This comprehension accords to a finer perspective to meliorate the theranostic environment for hyperthermia applications.

Role of interface in optimisation of polyamide-6/Fe[formula omitted]O[formula omitted] nanocomposite properties suitable for induction heating

Induction heating of magnetic nanoparticles (MNPs) and localised melting of the surrounding high temperature engineering polymer matrix by generating microscopic or macroscopic eddy currents during magnetisation of a polymer nanocomposite (PMC) is crucial for realising induction heating aided structural bonding. However, the polymer heating should be homogeneous and efficient to avoid local pyrolysis of the polymer matrix, which results in degraded mechanical properties, or requiring a large coil for generating a high frequency magnetic field. Increasing the interfacial area by homogeneously dispersing the MNPs in the polymer matrix provides many microscopic eddy currents to dissipate the power through magnetisation and polarisation, leading to micro eddy current induced uniform heating of the PMC. However, the application of a hydrophobic coating on MNPs to aid dispersion can perturb the generation of eddy currents and affect the crystallinity and size of the crystallites responsible for the mechanical properties. In this work, the dielectric and magnetic properties, as well as the degree/size of crystallinity of a PMC containing oleic acid (OA) (22 and 55 w/w%) and silica coated (Stöber and reverse emulsion method) Fe3O4 MNPs were measured to evaluate the effect of the interfacial coating and its chemistry. The correlation between the measured properties and dispersion state of the MNPs was established to demonstrate the comprehensive effects of interfacial coating on the PMC and this is a unique method to select a suitable PMC for induction aided structural bonding applications. The results showed that the lower amount of OA (22 w/w%) helped achieve the best dispersion to reduce the crystallinity size and increase degree of crystallinity, and to give the best candidate for achieving mechanical properties of the bonded carbon fibre reinforced polymer (CFRP). Moreover, the low concentration of OA helped achieve high polarisation for dielectric heating as well as eddy current formation due to the relatively high magnetic saturation. The silica coating proportionally reduced the magnetic response and electric polarisation of the PMC, which could affect its eddy current generation that is responsible for induction heating.

A new method to measure magnetic nanoparticle heating efficiency in non-adiabatic systems using transient pulse analysis.

Heating magnetic nanoparticles (MNPs) with alternating magnetic fields (AMFs) have applications in biomedical research and cancer therapy. Accurate measurement of the heating efficiency or specific loss power (SLP) generated by the MNPs is essential to assess response(s) in biological systems. Efforts to develop standardized equipment and to harmonize results obtained from various MNP samples and AMF systems have met with little success. Without a standardized magnetic nanoparticle or calorimeter device, objective comparisons of estimated thermal output among laboratories remain a challenge. In addition, the most widely used adiabatic initial slope model fails to account for thermal losses, which are unavoidable. We propose a non-adiabatic method to analyze MNP heating efficiency derived from the Box-Lucas equation, wherein the sample is subjected to several short duration heating pulses. SLP is then estimated from an arithmetic average of the Box-Lucas fitted coefficients obtained from each pulse. Heating experiments were conducted with two identical samples that were placed within vessels having different thermal insulation using the same AMF parameters. Though the samples generated different temperature curves, the pulsed Box-Lucas method produced nearly equivalent SLP estimates. Further, the pulsed test enabled analysis of the heat transfer coefficient providing quantitative measures of sample heat loss throughout the test, with robust statistical confidence. We anticipate this new methodology will aid efforts to standardize measurements of MNP heating efficiency, enabling direct comparison among varied systems.

Magnetic Nanoparticle Thermometry via Controlled Diffusion

The process of magnetic nanoparticle heating releases enormous amounts of thermal energy. Through typical calorimetric analyses, the total thermal energy released can be easily quantified; however, knowledge of nanoscale temperature is necessary. Herein, a novel method of nanoscale thermometry by analyzing intra-particle diffusion in core–shell nanoparticles is proposed. Heating the iron cores with an alternating magnetic field in a saline suspension encourages the diffusion of sodium ions into the silica shells of the particles, which is modeled numerically; however, experimental measurements are needed in order to provide accurate diffusivity estimations. After determining the diffusion characteristics from X-ray photoelectron spectroscopy) depth profiling of silica films, energy dispersive analysis with high-resolution transmission electron microscopy measures the sodium ion gradient within single particles before and after heating. When compared directly to the numerical simulations, the results indicate that the temperature gradient between particles and saline suspension reaches significantly higher temperatures than the macro-scale temperature of the solution. By accurately knowing the thermal gradient between nanoparticles and the surrounding medium, nanoparticles can be engineered to limit surface resistances as much as possible and promote high rates of thermal energy transfer.

Nanowarming of vitrified pancreatic islets as a cryopreservation technology for transplantation.

Biobanking of pancreatic islets for transplantation could solve the shortage of donors, and cryopreservation of vitrified islets is a possible approach. However, a technological barrier is rewarming of large volumes both uniformly and rapidly to prevent ice formation due to devitrification. Here, we describe successful recovery of islets from the vitrified state using a volumetric rewarming technology called "nanowarming," which is inductive heating of magnetic nanoparticles under an alternating magnetic field. Convective warming using a 37°C water bath as the gold standard for rewarming of vitrified samples resulted in a decrease in the viability of mouse islets in large volumes (>1 ml) owing to devitrification caused by slow warming. Nanowarming showed uniform and rapid rewarming of vitrified islets in large volumes. The viability of nanowarmed islets was significantly improved and islets transplanted into streptozotocin-induced diabetic mice successfully lowered serum glucose. The results suggest that nanowarming will lead to a breakthrough in biobanking of islets for transplantation.

Nanopore Generation in Biodegradable Silk/Magnetic Nanoparticle Membranes by an External Magnetic Field for Implantable Drug Delivery.

Implantable devices for localized and controlled drug release are important, e.g., for therapies of cancer and chronic pain. However, most of the existing active implants are limited by the usage of nonbiodegradable materials; thus, surgery is needed to extract them after the treatment, which leads to secondary damage. Here, we show a fully biodegradable composite membrane made from silk fibroin and magnetic nanoparticles (MNPs). The membrane porosity can be remotely modified by an alternating magnetic field, which opens nanopores by local heating of MNPs in the composite allowing a liquid to diffuse through them. The stability of the silk membrane in water can be prolonged up to several months by increasing its β-sheet content through ethanol annealing. We present the following original findings. (a) Nanopores can be generated inside the silk/MNP composite membrane by exposing it to an external alternating magnetic field. (b) A longer exposure time results in more nanopore sites. (c) The controllable release of rhodamine B dye is achieved by tuning the period of exposure to the magnetic field. The obtained results demonstrate the suitability of the investigated silk/MNP composite membrane as a potential functional material for implantable drug delivery.

The “field or frequency” dilemma in magnetic hyperthermia: The case of Zn Mn ferrite nanoparticles

• The conversion efficiency of electromagnetic energy to thermal energy is improved. • The SAR and ILP of Zn Mn ferrite MNPs is maximized with respect to the Zn content. • The optimum frequency of AC magnetic field decreases with the average MNPs size. • The SAR of the large MNPs has the super-quadratic dependence on the magnetic field. • The activation of Brown heating mechanism is shown for MNPs suspension in glycerol . The efficiency of conversion of electromagnetic energy into heat is a key factor for magnetic nanoparticles (MNPs) utilization in magnetic hyperthermia as well as in advanced magnetothermal medical techniques. Currently, the need to improve the MNPs heat release results in the increase of weight, size and power of alternating current (AC) facility and the aggravating side effects on health tissues. The aim of our work is to address these problems by offering a new strategy for improving the heat release at a relatively low frequency using ferrite based MNPs. We demonstrate nontrivial dependence of MNPs heat release on the amplitude of the AC magnetic field in zinc manganese ferrite Zn 0.2 Mn 0.8 Fe 2 O 4 MNPs (close to 5th power instead of a well-known quadratic). Our studies challenge the current conventional approaches based on the minimization of magnetic field amplitude. We offer a better strategy: to increase the amplitude while reducing the frequency to exploit the full potential of superquadratic law for amplitude dependence of heat output. We believe that this research should have a profound impact on a number of advanced biomedical applications of MNPs and magnetic hyperthermia.

Subsecond multichannel magnetic control of select neural circuits in freely moving flies.

Precisely timed activation of genetically targeted cells is a powerful tool for the study of neural circuits and control of cell-based therapies. Magnetic control of cell activity, or 'magnetogenetics', using magnetic nanoparticle heating of temperature-sensitive ion channels enables remote, non-invasive activation of neurons for deep-tissue applications and freely behaving animal studies. However, the in vivo response time of thermal magnetogenetics is currently tens of seconds, which prevents precise temporal modulation of neural activity. Moreover, magnetogenetics has yet to achieve in vivo multiplexed stimulation of different groups of neurons. Here we produce subsecond behavioural responses in Drosophila melanogaster by combining magnetic nanoparticles with a rate-sensitive thermoreceptor (TRPA1-A). Furthermore, by tuning magnetic nanoparticles to respond to different magnetic field strengths and frequencies, we achieve subsecond, multichannel stimulation. These results bring magnetogenetics closer to the temporal resolution and multiplexed stimulation possible with optogenetics while maintaining the minimal invasiveness and deep-tissue stimulation possible only by magnetic control.

Internal heating method of loop-mediated isothermal amplification for detection of HPV-6 DNA.

Loop-mediated isothermal amplification (LAMP) is a promising diagnostic tool for genetic amplification, which is known for its rapid process, simple operation, high amplification efficiency, and excellent sensitivity. However, most of the existing heating methods are external for completion of molecular amplification with possibility of contamination of specimens. The present research provided an internal heating method for LAMP using magnetic nanoparticles (MNPs), which is called nano-LAMP. Near-infrared light with an excitation wavelength of 808 nm was employed as the heating source; hydroxy naphthol blue (HNB) was used as an indicator to conduct methodological research. We demonstrate that the best temperature was controlled at a working power of 2 W and 4.8 µg/µL concentration of nanoparticles. The lowest limit for the detection of HPV by the nano-LAMP method is 102 copies/mL, which was confirmed by a gel electrophoresis assay. In the feasibility investigation of validated clinical samples, all 10 positive HPV-6 specimens amplified by nano-LAMP were consistent with conventional LAMP methods. Therefore, the nano-LAMP detection method using internal heating of MNPs may bring a new vision to the exploration of thermostatic detection in the future.Graphical abstract Supplementary InformationThe online version contains supplementary material available at 10.1007/s00604-022-05283-9.

A Ferrofluid with High Specific Absorption Rate Prepared in a Single Step Using a Biopolymer.

An exhaustive characterization of the physicochemical properties of gum arabic (GA)-coated Fe3O4 magnetic nanoparticles was conducted in this work. These nanoparticles were obtained via the in-situ coprecipitation method (a fast single-step method) in two GA:Fe ratios, 10:1 and 20:1, respectively. Several experimental techniques were applied in the characterization process, all of them described below. Using Transmission Electron Microcopy images, they were shown to have spherical-like morphology with 11 nm diameter. The Fourier Transform Infrared spectra confirmed the attachment of the GA on the surface of the magnetic nanoparticles (MNPs), providing good colloidal stability from pH 7 to 8. The thickness of the coatings (1.7 nm and 1.1 nm) was determined using thermogravimetric measurements. A high specific absorption rate and superparamagnetic properties were determined using alternant and static magnetic fields, respectively. The GA-coated MNPs were non-cytotoxic, according to tests on HT-29 human intestine cells. Additionally, HT-29 cells were exposed to magnetic fluid hyperthermia at 530 kHz, and the induction of cell death by the magnetic field, due to the heating of GA-coated MNP, was observed.

Probing dynamics of nanoparticle chains formation during magnetic hyperthermia using time-dependent high-frequency hysteresis loops

The heating power of magnetic nanoparticles (MNPs) submitted to high-frequency magnetic fields is generally probed using calorimetric methods, which suppose that the heating power does not evolve with time. Among the several parameters governing MNP heating properties, their organization into chains under the influence of the applied magnetic field is of key importance, though the dynamic of this phenomenon has been rarely studied experimentally. In the present article, time-resolved high-frequency hysteresis loops are used to probe the dynamics of chain formation on a sample of 17.3 ± 2.2 nm FeNi3 MNPs. Chains are formed on a timescale, which strongly depends on the magnetic field amplitude, ranging from several tens of seconds to less than 100 ms, but does not depend on frequency in the range studied here (from 9 to 78 kHz). Both the heating power and hysteresis loop squareness increase with time as chains progressively form. These findings have important methodological consequences when defining protocols or analyzing data issued from calorimetric measurements since, in samples where chains form, the heating power varies on a time scale that can be comparable to typical measurement times.

A setup to measure the temperature-dependent heating power of magnetically heated nanoparticles up to high temperature.

Magnetic heating, namely, the use of heat released by magnetic nanoparticles (MNPs) excited with a high-frequency magnetic field, has so far been mainly used for biological applications. More recently, it has been shown that this heat can be used to catalyze chemical reactions, some of them occurring at temperatures up to 700 °C. The full exploitation of MNP heating properties requires the knowledge of the temperature dependence of their heating power up to high temperatures. Here, a setup to perform such measurements is described based on the use of a pyrometer for high-temperature measurements and on a protocol based on the acquisition of cooling curves, which allows us to take into account calorimeter losses. We demonstrate that the setup permits to perform measurements under a controlled atmosphere on solid state samples up to 550 °C. It should in principle be able to perform measurements up to 900 °C. The method, uncertainties, and possible artifacts are described and analyzed in detail. The influence on losses of putting under vacuum different parts of the calorimeter is measured. To illustrate the setup possibilities, the temperature dependence of heating power is measured on four samples displaying very different behaviors. Their heating power increases or decreases with temperature, displaying temperature sensibilities ranging from -2.5 to +4.4% K-1. This setup is useful to characterize the MNPs for magnetically heated catalysis applications and to produce data that will be used to test models permitting to predict the temperature dependence of MNP heating power.

Heat transfer and thermoregulation within single cells revealed by transient plasmonic imaging

Summary Cells, as the basic unit of life, undergo continuous heat transfer and dissipation during their metabolism, which is related not only to fundamental cellular functions but also massive applications. Unfortunately, thus far, we still know little about the heat transfer properties at the cellular or subcellular levels. Here, we demonstrated a transient microscopic method to measure the heat transfer in single cells. The thermal conductivity of different regions within a single cell shows a wide heterogeneity, and heat transfer in the region near the cell membrane is more active than the central region. However, the median values of thermal conductivity between different individual cells are quite close. A cellular-level heat regulation that responds to environmental temperature is observed in warm-blooded humans and chickens rather than in cold-blooded bullfrogs. According to the temperature-dependent cell metabolism, we proposed a hypothesis for cellular control of heat dissipation, which might be the cellular-level foundation of body thermoregulation.

Remotely triggered morphing behavior of additively manufactured thermoset polymer-magnetic nanoparticle composite structures

Shape memory polymers (SMPs) based systems find technological applications in diverse areas such as soft robotics, biomedical devices and aerospace structures. The shape memory (SM) response of a custom-made, additively manufactured (AM) SMP structure can be triggered by a remote, contactless AC magnetic field, resulting in morphing of the structure. We developed AM architectures based on SM thermoset polymers loaded with magnetic nanoparticles (MNPs). Composite structures were prepared from a crosslinkable polycaprolactone dimethacrylate SMP matrix and iron oxide MNP filler. Additive manufacturing of these structures was carried out using these polymers loaded with MNP. Triggered morphing of these structures is achieved by an external alternating magnetic field; the MNP heat up, triggering the SM shape change of the polymer matrix. A variety of structures were AM by a careful choice of materials and process parameters and morphing behavior was demonstrated. This convergence of additive manufacturing technologies and structures prepared from SM thermoset polymers loaded with MNP demonstrates the feasibility of personalized, remotely triggered morphing components for advanced applications, e.g. soft robotics, biomedical devices and smart structural components in buildings.

Challenges and recommendations for magnetic hyperthermia characterization measurements

Purpose The localized heating of magnetic nanoparticles (MNPs) via the application of time-varying magnetic fields – a process known as magnetic field hyperthermia (MFH) – can greatly enhance existing options for cancer treatment; but for broad clinical uptake its optimization, reproducibility and safety must be comprehensively proven. As part of this effort, the quantification of MNP heating – characterized by the specific loss power (SLP), measured in W/g, or by the intrinsic loss power (ILP), in Hm2/kg – is frequently reported. However, in SLP/ILP measurements to date, the apparatus, the analysis techniques and the field conditions used by different researchers have varied greatly, leading to questions as to the reproducibility of the measurements. Materials and Methods An interlaboratory study (across N = 21 European sites) of calorimetry measurements that constitutes a snapshot of the current state-of-the-art within the MFH community has been undertaken. Identical samples of two stable nanoparticle systems were distributed to all participating laboratories. Raw measurement data as well as the results of in-house analysis techniques were collected along with details of the measurement apparatus used. Raw measurement data was further reanalyzed by universal application of the corrected-slope method to examine relative influences of apparatus and results processing. Results The data show that although there is very good intralaboratory repeatability, the overall interlaboratory measurement accuracy is poor, with the consolidated ILP data having standard deviations on the mean of ca. ± 30% to ± 40%. There is a strong systematic component to the uncertainties, and a clear rank correlation between the measuring laboratory and the ILP. Both of these are indications of a current lack of normalization in this field. A number of possible sources of systematic uncertainties are identified, and means determined to alleviate or minimize them. However, no single dominant factor was identified, and significant work remains to ascertain and remove the remaining uncertainty sources. Conclusion We conclude that the study reveals a current lack of harmonization in MFH characterization of MNPs, and highlights the growing need for standardized, quantitative characterization techniques for this emerging medical technology.